Changing logs to debug level and format of statment to j == ...
Updating debug statements to include comments when checking for iteration level of i and j
Removing comments above log prints in Part 3
Removing unwanted file
Added log prints in loops in p2p_sendheaders
89fe5feea2 [tests] Stop feature_block.py from blowing up memory. (John Newbery)
Pull request description:
The new P2PDataStore class was sending full blocks in headers messages,
which meant that calls to send_blocks_and_test() would blow up memory if
called with a large number of blocks. Fix that by only sending headers
in headers messages.
This means that python should use just over 1GB for feature_block.py (with bitcoind also using just over 1GB). That's the same as before the feature_block.py refactor.
Tree-SHA512: 796ea35584748ceb7b8fa36c732a461fb924dafe0b4c52d3eccf21a00fbdb65aef41ce1d91f027aad50cde6df5d30e985aaef474cb743975c06762975469cbbb
The new P2PDataStore class was sending full blocks in headers messages,
which meant that calls to send_blocks_and_test() would blow up memory if
called with a large number of blocks. Fix that by only sending headers
in headers messages.
bip9-sofforks.py was intended to be a generic test for versionbits
deployments. However, it only tests CSV activation and was not updated
to test segwit activation. CSV activation is tested by
bip68-112-113-p2p.py, so this test is duplicated effort.
Rather than try to update it to use the BitcoinTestFramework, just
remove it.
b55555d rpc: Add testmempoolaccept (MarcoFalke)
Pull request description:
To check if a single raw transaction makes it into the current transaction pool, one had to call `sendrawtransaction`. However, on success, this adds the transaction to the mempool with no easy way to undo.
The call `testmempoolaccept` is introduced to provide a way to solely check the result without changing the mempool state.
Tree-SHA512: 5afd9311190135cee8fc1f229c7d39bf893f1028f29e28d34f70df820198ff97b4bf86b41cbbd6e6c36a5c30073cefa92d541c74a4939c7a2a6fa283dfd41b63
db983beba6 tests: Add lint-tests.sh which checks the test suite naming convention (practicalswift)
5fd864fe8a tests: Rename test suits not following the test suite naming convention (practicalswift)
7b4a296a71 tests: Add note about test suite naming convention (practicalswift)
Pull request description:
Changes:
* Add note about test suite naming convention
* Fix exceptions
* Add regression test
Rationale:
* Consistent naming of test suites makes programmatic test running of specific tests/subsets of tests easier
* Explicit is better than implicit
Before this commit:
```
$ contrib/devtools/lint-tests.sh
The test suite in file src/test/foo_tests.cpp should be named
"foo_tests". Please make sure the following test suites follow
that convention:
src/test/blockchain_tests.cpp:BOOST_FIXTURE_TEST_SUITE(blockchain_difficulty_tests, BasicTestingSetup)
src/test/prevector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(PrevectorTests, TestingSetup)
src/wallet/test/coinselector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(coin_selection_tests, WalletTestingSetup)
src/wallet/test/crypto_tests.cpp:BOOST_FIXTURE_TEST_SUITE(wallet_crypto, BasicTestingSetup)
$
```
After this commit:
```
$ contrib/devtools/lint-tests.sh
$
```
Tree-SHA512: 7258ab9a6b9b8fc1939efadc619e2f2f02cfce8034c7f2e5dc5ecc769aa12e17f6fb8e363817feaf15c026c5b958b2574525b8d2d3f6be69658679bf8ceea9e9
ea04bf7862 Enable flake8 warning F841 ("local variable 'foo' is assigned to but never used") (practicalswift)
169f3e8637 Remove assigned but never used local variables (practicalswift)
Pull request description:
Remove assigned but never used local variables. Enable Travis checking for unused local variables.
Tree-SHA512: d6052ec9044c5d1f03d874ea3c8addd5a156779213ef9200f89d3ae53230f2fd1691aff405c3dae14178e5ef09912c4432e92f606ef4a5220ed9daa140cdee81
63048ec73d [tests] Test starting bitcoind with -h and -version (John Newbery)
Pull request description:
Test that starting bitcoind/bitcoin-qt with `-h` and `-version` works as expected.
Prompted by https://github.com/bitcoin/bitcoin/pull/10762#commitcomment-28345993, which is a nullpointer dereference triggered by starting bitcoin-qt with `-h`.
On master, this test passes when run over bitcoind, but fails when running over bitcoin-qt. I used xvfb as a virtual frame buffer to test:
```
BITCOIND=/home/ubuntu/bitcoin/src/qt/bitcoin-qt xvfb-run ./feature_help.py --nocleanup
2018-03-30T17:09:37.767000Z TestFramework (INFO): Initializing test directory /tmp/user/1000/testdi4dre13
2018-03-30T17:09:37.767000Z TestFramework (INFO): Start bitcoin with -h for help text
2018-03-30T17:09:37.841000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 126, in main
self.run_test()
File "./feature_help.py", line 25, in run_test
assert_equal(ret_code, 0)
File "/home/ubuntu/bitcoin/test/functional/test_framework/util.py", line 39, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(-11 == 0)
2018-03-30T17:09:37.842000Z TestFramework (INFO): Stopping nodes
Traceback (most recent call last):
File "./feature_help.py", line 42, in <module>
HelpTest().main()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 149, in main
self.stop_nodes()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_framework.py", line 273, in stop_nodes
node.stop_node()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_node.py", line 141, in stop_node
self.stop()
File "/home/ubuntu/bitcoin/test/functional/test_framework/test_node.py", line 87, in __getattr__
assert self.rpc_connected and self.rpc is not None, "Error: no RPC connection"
AssertionError: Error: no RPC connection
```
Passes for bitcoind and bitcoin-qt when run on #12836.
Longer term, we should consider running functional tests over bitcoin-qt in one of the Travis jobs.
Tree-SHA512: 0c2f40f3d5f0e78c3a1b07dbee8fd383eebab27ed0bf2a98a5b9cc66613dbd7b70e363c56163a37e02f68ae7ff7b3ae1769705d0e110ca68a00f8693315730a4
12982682a6 [tests] Change feature_csv_activation.py to use BitcoinTestFramework (John Newbery)
db7ffb9d1b [tests] Move utility functions in feature_csv_activation.py out of class. (John Newbery)
0842edf9ee [tests] Remove nested loops from feature_csv_activation.py (John Newbery)
2e511d5424 [tests] improve logging in feature_csv_activation.py (John Newbery)
6f7f5bc002 [tests] fix flake8 nits in feature_csv_activation.py (John Newbery)
Pull request description:
Next step in #10603.
- first four commits tidy up bip68-112-113-p2p.py
- fifth commit removes usage of ComparisonTestFramework
Tree-SHA512: 34466be12280096ad92ac842f9c594ae40c19be9b4edc73c1e37964d03d55f4e75b80cea50c9940404096effc23705671503a883a7b7773b5866a29f653ba710
5a67c0524e [tests] Fix intermittent rpc_net.py failure. (John Newbery)
Pull request description:
rpc_net.py would intermittently fail on Travis, probably
due to assuming that two consecutive RPC calls were atomic.
Fix this by trying the test up to three times and only failing
if all three attempts fail.
fixes#11778
Tree-SHA512: f2f5047e05114ad2110377e6221ce057680c240952971fb33863834587d2250896c6b697ba27eef739cd0ab23faf47dfae8cafadc9833cbfab5a6f7e36dae5e2
f7683cba7b Track negated arguments in the argument paser. (Evan Klitzke)
4f872b2450 Add additional tests for GetBoolArg() (Evan Klitzke)
Pull request description:
This change explicitly enable tracking negated options in the option parser. A negated option is one passed with a `-no` prefix. For example, `-nofoo` is the negated form of `-foo`. Negated options were originally added in the 0.6 release.
The change here allows code to explicitly distinguish between cases like `-nofoo` and `-foo=0`, which was not possible previously. The option parser does not have any changed semantics as a result of this change, and existing code will parse options just as it did before.
The motivation for this change is to provide a way to disable options that are otherwise not boolean options. For example, the `-debuglogfile` option is normally interpreted as a string, where the value is the log file name. With this change a user can pass in `-nodebuglogfile` and the code can see that it was explicitly negated, and use that to disable the log file.
This change originally split out from #12689.
Tree-SHA512: cd5a7354eb03d2d402863c7b69e512cad382781d9b8f18c1ab104fc46d45a712530818d665203082da39572c8a42313c5be09306dc2a7227cdedb20ef7314823
0c17e27630 init: Remove help text for non-existent -fuzzmessagestest arg (MarcoFalke)
136084470c contrib: Fix check-doc script regexes (MarcoFalke)
Pull request description:
Fixup the regexes to properly find all used args. The regex should now match all of the getter and setter methods of the `ArgsManager`. See https://dev.visucore.com/bitcoin/doxygen/class_args_manager.html#pub-methods
Before:
```
Args used : 159
Args documented : 188
Args undocumented: 0
Args unknown : 29
```
After:
```
Args used : 183
Args documented : 188
Args undocumented: 0
Args unknown : 5
```
Tree-SHA512: 1a7fb7ea55b2f6030358a1055d8f2c19b31f69d0603be0b009e6e603564014b4e2bb824357c9d43d0fba3ce7159b7c4e7eaa60b3f962053d94f73d0e626294fc
8394300859 [Tests] fix a typo in TestNode.assert_start_raises_init_error() (Roman Zeyde)
Pull request description:
`self.wait_util_stopped()` should be `self.wait_until_stopped()`.
Also, use a specific Exception subclass for indicating node failure to start (instead of using `AssetionError` and an `except Exception` clause).
Following https://travis-ci.org/bitcoin/bitcoin/jobs/359066226#L2726 and depending on #12806 (which fixes the root cause of the Travis test failure).
Tree-SHA512: 7bd5a95586a412472ef9dffdb086789d7275ddaf862724e21cebb3418d0c97e6d89b4d1a58375e42114060d028403d6eab89e3a1e9a833ffe8dadf3439ab1fe2
9df1a9c test: Remove travis checkout depth (Wladimir J. van der Laan)
Pull request description:
Travis tests on branches of non-head commits are failing, because the depth of 1 doesn't allow checking them out.
E.g.: https://travis-ci.org/bitcoin/bitcoin/jobs/360227253
Remove `depth` as was the case before fa44af5cd2, so that Travis can determine the minimum depth to check out.
Tree-SHA512: f193939cbef2aadd8d88fe522bd5ea84a3b72899f043279e3e8b546a70875a85561adf53e3f70c288833382eb71576c8fb6ef4db0588894c609fb58f5afce6df
Tests on branches of non-head commits are failing, because the depth of
1 doesn't allow checking them out.
Remove `depth` as was the case before fa44af5cd2,
so that Travis can determine the minimum depth to check out.
a7c45bc Add native support for serializing char arrays without FLATDATA (Pieter Wuille)
Pull request description:
Support is added to serialize arrays of type `char` or `unsigned char` directly, without any wrappers. All invocations of the `FLATDATA` wrappers that are obsoleted by this are removed.
This includes a patch by @ryanofsky to make `char` casting type safe.
The serialization of `CSubNet` is changed to serialize a `bool` directly rather than though `FLATDATA`. This makes the serialization independent of the size of the bool type (and will use 1 byte everywhere).
This is a small change taken from #10785.
Tree-SHA512: a41f61ca5fdc2fadb2d0e1702351a58a23841d551f505292a9542602cdb19f90d8944b8df14b872810a56bd201648fa4c0e958f3e9427fe829886284e85b9bfd
76a9aac Move compressor utility functions out of class (Pieter Wuille)
Pull request description:
This is a refactor from #10785 with no functionality change.
Move the compresion utility functions out of CScriptCompressor, as a preparation for making the class templated. I'm submitting it as a separate PR as I think it's a general improvement to code readability, and to reduce the diff further on.
Tree-SHA512: 3b3d17c2b96e43f752f512dd573296a6bb15cae165fbe3c79212a0970f5196a62a59a821d5100f29638af1e7461c9171f3dccb8112f005ee08da0ec7fe0073fd
9471576 [verify-commits] Add some additional useful documentation. (Matt Corallo)
de7e931 Add Marco-expired-key-signed-commits to allow-revsig-commits (Matt Corallo)
99f6d48 Revert "test: Update trust git root". (Matt Corallo)
Pull request description:
7deba93bdc was took the wrong approach to updating verify-commits for a key expiration. Namely, adding each commit to allow-revsig-commits should have been done instead, allowing them to still be validated, but with the expired key.
Tree-SHA512: 9fdc67eda8f6daa95082f6c1a2af81beb730a9ff3f8cf930bb2311fe29b5f05e1f89259aba5f112153ca2e9c62577cf60d31b4c8e9ac1bf3f5506e78f8401378
cb1e319 Bugfix: RPC: savemempool: Don't save until LoadMempool() is finished (Jorge Timón)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/12142
The tests are a little bit slow, mempool_persist.py goes from about 20 s to about 120 s in my hardware.
Perhaps there's a better way to test this.
Tree-SHA512: 9e6c24b32a9cf3774e8f0bd81c035b0deb53fba5ac3eb2532d85900579d21cef8a1135b75a4fa0a9d883e3822eb35e7d4b47a0838abf99789039205041962629
6feb46c Add --with-sanitizers option to configure (Evan Klitzke)
Pull request description:
This adds configure options for `-fsanitize=address`, `-fsanitize=thread`, and `-fsanitize=undefined` which are all disabled by default. These flags are useful for developers who wish to do additional safety checking. Note that some of these are mutually incompatible, and these may have a large performance overhead.
There's some kind of strange logic required to properly check for the availability of these flags in a way that works on both GCC and Clang, hopefully the comments make it clear what's going on.
Tree-SHA512: 2d6fe402799110e59ee452dddf37f7ca2d26a7fecec50be25c8a134e4a20beb31f1e8f438dffd443641562418075896d1eeb450623425b272d80e05e3027a587
265d7c4 [tests] Improve assert message when wait_until() fails (John Newbery)
ebf053a [tests] Change feature_block.py to use BitcoinTestFramework (John Newbery)
fc02c12 [tests] Add logging to feature_block.py (John Newbery)
3898c4f [tests] Tidy up feature_block.py (John Newbery)
5cd01d2 [tests] Fix flake8 warnings in feature_block.py (John Newbery)
Pull request description:
Next step in #10603.
- first three commits tidy up feature_block.py
- fourth commit removes usage of ComparisonTestFramework
Longer term, it would be better to separate net_processing testing from validation testing, but I think this is still a useful PR, since it moves us away from the comparison test framework.
Tree-SHA512: d0bb3ad22ad0aa1222877f4212bff075f9ce358e99c69c26d9913e4b346d931b8380e744434a9f6f37812c352cdaa75791691565bfeb18afcb619c06c6ca32a3
c7ec524 [wallet] Add dummy wallet init class (John Newbery)
49baa4a [wallet] Use global g_wallet_init_interface to init/destroy the wallet. (John Newbery)
caaf972 [wallet] Create wallet init interface. (John Newbery)
5fb5421 [wallet] Move wallet init functions into WalletInit class. (John Newbery)
Pull request description:
This continues the work of #7965. This PR, along with several others, would remove the remaining dependencies from libbitcoin_server.a on libbitcoin_wallet.a.
To create the interface, I've just translated all the old init.cpp wallet function calls into an interface class. I've not done any thinking about whether it makes sense to change that interface by combining/splitting those calls. This is a purely internal interface, so there's no problem in changing it later.
Tree-SHA512: 32ea57615229c33fd1a7f2f29ebc11bf30337685f7211baffa899823ef74b65dcbf068289c557a161c5afffb51fdc38a2ee8180720371f64d433b12b0615cf3f
0bd2ec5 Improve formatting of developer notes (Evan Klitzke)
Pull request description:
The developer notes file has gotten pretty large and unwieldly. This reorganizes some content, most notably by adding a TOC to the page. Compare how the page looks in [my branch](https://github.com/eklitzke/bitcoin/blob/developer-notes/doc/developer-notes.md) vs [master](https://github.com/eklitzke/bitcoin/blob/master/doc/developer-notes.md).
I know there's long-term interest in moving a lot of this content to the bitcoin-core/docs repo on GitHub, but this makes things better now.
The TOC format here is a semi-standard extension to Markdown files that you may have seen on GitHub pages in other projects. The `<!-- markdown-toc -->` comments used by these tools to know where the TOC starts/ends. The following tools all understand this format:
* [Sphinx](http://www.sphinx-doc.org/en/master/)
* [Pandoc](https://pandoc.org/)
* [markdown-toc.el](https://github.com/ardumont/markdown-toc) (what I used)
* various plugins for [vim](https://github.com/mzlogin/vim-markdown-toc) and other editors
I used this TOC extension at a previous job, and my observation is that it's fine if people just edit the TOC manually. It's just text and it's not a huge deal if it gets a little out of sync. It can also be regenerated at any time by anyone with any of these tools.
Tree-SHA512: 298d1605ea5e8bfc0f75e70570c23ebd6891e4ffcdedd24fefadc23edd6e4b96509d8d102209868468a1b3ddbe2c3b8462698cdda8b9421348b5bc6f7b8d0cb8
b466f6b [Tests] Use blockmaxweight where tests previously had blockmaxsize (Conor Scott)
Pull request description:
Fix for #12768: `-blockmaxsize` has been removed, but some tests were using this feature, so update with `-blockmaxweight`
Tree-SHA512: 5f6d643daee43366c6e61f4154a3920efb4cef1455e483575cf19b0f95bc6e56668360c1562fa18f85b336e48f64e482bd29b1ecb227d7c78c4344d7f5d32ed3
ccedbaf Increase LevelDB max_open_files unless on 32-bit Unix. (Evan Klitzke)
Pull request description:
Currently we set `max_open_files = 64` on all architectures due to concerns about file descriptor exhaustion. This is extremely expensive due to how LevelDB is designed.
When a LevelDB file handle is opened, a bloom filter and block index are decoded, and some CRCs are checked. Bloom filters and block indexes in open table handles can be checked purely in memory. This means that when doing a key lookup, if a given table file may contain a given key, all of the lookup operations can happen completely in RAM until the block itself is fetched. In the common case fetching the block is one disk seek, because the block index stores its physical offset. This is the ideal case, and what we want to happen as often as possible.
If a table file handle is not open in the table cache, then in addition to the regular system calls to open the file, the block index and bloom filter need to be decoded before they can be checked. This is expensive and is something we want to avoid.
The current setting of 64 file handles means that on a synced node, only about 4% of key lookups can be satisifed by table file handles that are actually open and in memory.
The original concerns about file descriptor exhaustion are unwarranted on most systems because:
* On 64-bit POSIX hosts LevelDB will open up to 1000 file descriptors using `mmap()`, and it does not retain an open file descriptor for such files.
* On Windows non-socket files do not interfere with the main network `select()` loop, so the same fd exhaustion issues do not apply there.
This change keeps the default `max_open_files` value (which is 1000) on all systems except 32-bit POSIX hosts (which do not use `mmap()`). Open file handles use about 20 KB of memory (for the block index), so the extra file handles do not cause much memory overhead. At most 1000 will be open, and a fully synced node right now has about 1500 such files.
Profile of `loadblk` thread before changes: https://monad.io/maxopenfiles-master.svg
Profile of `loadblk` thread after changes: https://monad.io/maxopenfiles-increase.svg
Tree-SHA512: de54f77d57e9f8999eaf8d12592aab5b02f5877be8fa727a1f42cf02da2693ce25846445eb19eb138ce4e5045d1c65e14054df72faf3ff32c7655c9cfadd27a9
