CWallet::ScanForWalletTransactions did not previously take into account
pindexStop when calculating progress.
Renamed progress vars to progress_*.
rescanblockchain is the only rpc that uses this parameter.
According to the BerkeleyDB docs, the DbEnv handle may not be accessed
after close() has been called. This change ensures that we create a new
handle after close() is called. This avoids a segfault when the first
connection attempt fails and then a second connection attempt tries to
call open() on the already closed DbEnv handle.
a59dac3 refactor: Avoid extra lookups of mapAddressBook in listunspent RPC (João Barbosa)
d76962e rpc: Reduce cs_main lock in listunspent (João Barbosa)
Pull request description:
On my system, where the wallet has 10000 unspents, the `cs_main` lock duration changed from 191ms to 36ms. The loop that generates the response takes around 155ms. So, the lock duration is reduced to around 20%.
Tree-SHA512: ddaae591f39da59a9d1a8e9ffe773d857687789476f566ca273d310ad531da6dacff80cac69f3334c601c251ac7c5ed4136656c725aa3d611c6bbf734111946e
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
3fdc5fe Make sure initialization occurs in the constructor (practicalswift)
1e7813e Remove redundant initializations from the constructor (practicalswift)
f131872 Initialize non-static class members where they are defined (practicalswift)
73bc1b7 Initialize editStatus and autoCompleter. Previously not initialized where defined or in constructor. (practicalswift)
Pull request description:
Initialize variables previously neither defined where defined nor in constructor:
* `editStatus`
* `autoCompleter`
Also; initialize non-static class members where they are defined in accordance with developer notes.
Tree-SHA512: 84f0cb87ec8394ed7641bfa0731be2ec72e6a920e00ae206ff89e2e7c960358f603c52878311b24601a33aa7cba6ea4f9a78a8ade88112dea0f41efb08e84e25
9cb6cdc Simplify semantics of ChainStateFlushed callback (Matt Corallo)
50b6533 scripted-diff: Rename SetBestChain callback ChainStateFlushed (Matt Corallo)
Pull request description:
Previously, ChainStateFlushed would fire either if a full flush
completed (which can happen due to memory limits, forced flush, or
on its own DATABASE_WRITE_INTERVAL timer) *or* on a
ChainStateFlushed-specific DATABASE_WRITE_INTERVAL timer. This is
both less clear for clients (as there are no guarantees about a
flush having actually happened prior to the call), and reults in
extra flushes not clearly intended by the code. We drop the second
case, providing a strong guarantee without removing the periodit
timer-based flushing.
This is a follow-up to discussion in #11857.
Tree-SHA512: 22ba3a0954d265d28413dbf87040790ca5b439820ee7bbadab14028295ec190de82ce5cd664426c82e58b706dc84278868026fa8d066702eb6e6962c9ace1f8e
`LogPrintStr` returns the number of characters printed. This number is
doubled if both logging to console and logging to file is enabled. As
the return value is never used, I've opted to remove it instead of try
to fix it.
Credit: @laanwj
8c2d695c4a util: Store debug log file path in BCLog::Logger member. (Jim Posen)
8e7b961388 scripted-diff: Rename BCLog::Logger member variables. (Jim Posen)
1eac317f25 util: Refactor GetLogCategory. (Jim Posen)
3316a9ebb6 util: Encapsulate logCategories within BCLog::Logger. (Jim Posen)
6a6d764ca5 util: Move debug file management functions into Logger. (Jim Posen)
f55f4fcf05 util: Establish global logger object. (Jim Posen)
Pull request description:
This is purely a refactor with no behavior changes.
This creates a new class `BCLog::Logger` to encapsulate all global logging configuration and state.
Tree-SHA512: b34811f54a53b7375d7b6f84925453c6f2419d21179379ee28b3843d0f4ff8e22020de84a5e783453ea927e9074e32de8ecd05a6fa50d7bb05502001aaed8e53
e2f58f4 wallet: Make vpwallets usage thread safe (João Barbosa)
Pull request description:
This PR turns the functions introduced in #13017 thread safe. This is required to correctly support dynamically loading wallets, which is implemented in #10740.
Tree-SHA512: efaa09e501636cf957aa33de83719ce09dc0c2a19daff741a94ef10d6b7ba5dee538355b80c96ead995140f99f5df0c92fb0e22ae1adb8f397eb478280c8d8c7
66dc662c8a Add compile time checking for all cs_KeyStore runtime locking assertions (practicalswift)
Pull request description:
Add compile time checking for all `cs_KeyStore` runtime locking assertions.
This PR is a subset of #12665. The PR was broken up to make reviewing easier.
The intention is that literally all `EXCLUSIVE_LOCKS_REQUIRED`/`LOCKS_EXCLUDED`:s added in this PR should follow either directly or indirectly from `AssertLockHeld(…)`/`AssertLockNotHeld(…)`:s already existing in the repo.
Consider the case where function `A(…)` contains `AssertLockHeld(cs_foo)` (without
first locking `cs_foo` in `A`), and that `B(…)` calls `A(…)` (without first locking `cs_main`):
* It _directly_ follows that: `A(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
* It _indirectly_ follows that: `B(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
Tree-SHA512: 84ee5459e7f75f9affaa4275cb760576ab0e26da8a48b9a4a59b51a25418fe4b862ba832cb01312479a8c9b0e38ee8b6c4076bcbbd73213346d09ec2057fc9f1
Previously, ChainStateFlushed would fire either if a full flush
completed (which can happen due to memory limits, forced flush, or
on its own DATABASE_WRITE_INTERVAL timer) *or* on a
ChainStateFlushed-specific DATABASE_WRITE_INTERVAL timer. This is
both less clear for clients (as there are no guarantees about a
flush having actually happened prior to the call), and reults in
extra flushes not clearly intended by the code. We drop the second
case, providing a strong guarantee without removing the periodit
timer-based flushing.
This much more accurately captures the meaning of the callback.
-BEGIN VERIFY SCRIPT-
sed -i 's/SetBestChain/ChainStateFlushed/g' src/validationinterface.h src/validationinterface.cpp src/wallet/wallet.h src/wallet/wallet.cpp src/validation.cpp src/index/txindex.h src/index/txindex.cpp
-END VERIFY SCRIPT-
d8e9a2a Remove "rpc" category from GetWarnings (Wladimir J. van der Laan)
7da3b0a rpc: Move RPC_FORBIDDEN_BY_SAFE_MODE code to reserved section (Wladimir J. van der Laan)
2ae705d Remove Safe mode (Andrew Chow)
Pull request description:
Rebase of #10563. Safe mode was [disabled by default and deprecated in 0.16](https://github.com/bitcoin/bitcoin/blob/master/doc/release-notes/release-notes-0.16.0.md#safe-mode-disabled-by-default), so probably should be removed for 0.17.
> Rationale:
>
> Safe mode is useless. It only disables some RPC commands when large work forks are detected. Nothing else is affected by safe mode. It seems that very few people would be affected by safe mode. The people who use Core as a wallet are primarily using it through the GUI, which safe mode does not effect. In the GUI, transactions will still be made as normal; only a warning is displayed.
>
> I also don't think that we should be disabling RPC commands or any functionality in general. If we do, it should be done consistently, which safe mode is not. If we want to keep the idea of a safe mode around, I think that the current system needs to go first before a new system can be implemented.
Tree-SHA512: 067938f47ca6e879fb6c3c4e21f9946fd7c5da3cde67ef436f1666798c78d049225b9111dc97064f42b3bc549d3915229fa19ad5a634588f381e34fc65d64044
Although this code is no longer ever sent back after removing safe mode,
it would be unwise to remove it from the header.
For one, it would be bad to accidentally re-use the number.
Also some API documentation / bindings are directly generated from the .h
file - this is why the "Aliases for backward compatibility" are there. We don't
want to break code that relies on this error code existing, even if it's never
generated.
So keep it around but move it to a reserved section.
7d0f80b Use anonymous namespace instead of static functions (Pieter Wuille)
b61fb71 Mention removal of bare multisig IsMine in release notes (Pieter Wuille)
9c2a8b8 Do not treat bare multisig as IsMine (Pieter Wuille)
08f3228 Optimization: only test for witness scripts at top level (Pieter Wuille)
3619735 Track difference between scriptPubKey and P2SH execution in IsMine (Pieter Wuille)
ac6ec62 Switch to a private version of SigVersion inside IsMine (Pieter Wuille)
19fc973 Do not expose SigVersion argument to IsMine (Pieter Wuille)
fb1dfbb Remove unused IsMine overload (Pieter Wuille)
952d821 Make CScript -> CScriptID conversion explicit (Pieter Wuille)
Pull request description:
Currently our wallet code will treat bare multisig outputs (meaning scriptPubKeys with multiple public keys + `OP_CHECKMULTISIG` operator in it) as ours without the user asking for it, as long as all private keys in it are in our wallet.
This is a pointless feature. As it only works when all private keys are in one place, it's useless compared to single key outputs (P2PK, P2PKH, P2WPKH, P2SH-P2WPKH), and worse in terms of space, cost, UTXO size, and ability to test (due to lack of address format for them).
Furthermore, they are problematic in that producing a list of all `scriptPubKeys` we accept is not tractable (it involves all combinations of all public keys that are ours). In further wallet changes I'd like to move to a model where all scriptPubKeys that are treated as ours are explicit, rather than defined by whatever keys we have. The current behavior of the wallet is very hard to model in such a design, so I'd like to get rid of it.
I think there are two options:
* Remove it entirely (do not ever accept bare multisig outputs as ours, unless watched)
* Only accept bare multisig outputs in situations where the P2SH version of that output would also be acceptable
This PR implements the first option. The second option was explored in #12874.
Tree-SHA512: 917ed45b3cac864cee53e27f9a3e900390c576277fbd6751b1250becea04d692b3b426fa09065a3399931013bd579c4f3dbeeb29d51d19ed0c64da75d430ad9a
abd58a2 Fix for utiltime to compile with msvc. (Aaron Clauson)
Pull request description:
This PR allows utiltime.cpp to compile with msvc after the changes introduced in #12973.
Tree-SHA512: 7233b1c23400bf19aef2fcb6168009ef58b9e7f8e49c46d8cf9d04394091f370e39496d24ca00b294c4164bcfc04514e329bf6bb05169406c34ce7cd8c382565
41ff967 list the types of scripts we should consider for a witness program (fivepiece)
4f933b3 p2wpkh, p2wsh and p2sh-nested scripts in decodescript (fivepiece)
Pull request description:
Attempts to address #12244 . `p2wsh` addresses are returned only for scripts that are neither `p2sh` nor any witness program.
Tree-SHA512: eb47f094c1a4c2ad2bcf27a8032307e43cf787d50bf739281aeb4101d97316a2f307b05118bf138298c937fa34e15f91436443a9b313f809fad2c43e94cd1831
7de1de7 Add new fee structure with all sub-fields denominated in BTC (mryandao)
Pull request description:
the denomination for `fee` is current in btc while the other such as `decendentFee` and `ancestorFee` are in satoshis.
Tree-SHA512: e428f6dca1d339f89ab73e38ce5903f5465c46b159069d9bcc3f8b1140fe6657fa49a11abe0088e9f7ba9999f64af72a349a4735bf5eaa61b8e4a185b23543f3
Now that the transaction index is updated asynchronously, in order to
preserve the current behavior of public interfaces, the code blocks
until the transaction index is caught up with the current state of the
blockchain.
In order to preserve getrawtransaction RPC behavior, there needs to be
a way for a thread to ensure the transaction index is in sync with the
current state of the blockchain.
The TxIndex will be responsible for building the transaction index
concurrently with the main validation thread by implementing
ValidationInterface. This does not process blocks concurrently yet.
Addresses #12796.
When we're unable to add a sending address to the address book because it
already exists as a receiving address, display a message indicating as much.
This should help avoid confusion about an address supposedly already in the
book but which isn't currently visible in the interface.
fa3bb183ad bench: Amend mempool_eviction test for witness txs (MarcoFalke)
962d223e5c bench: Move constructors out of mempool_eviction hot loop (MarcoFalke)
Pull request description:
Tree-SHA512: 997a07e067623bc2c0904a21bd490d164045cf51393af260fc79882ed010636dce82c9ebe35aae8fa5db5e73c9f3ecb6232353a0939c295034f9be574f1fcff2
fac0db0 wallet: Make fee settings non-static members (MarcoFalke)
Pull request description:
The wallet header defined some globals (they were called "settings"), that should be class members instead.
This commit is hopefully only refactoring, apart from a multiwallet bugfix: Calling the rpc `settxfee` for one wallet, would set (and change) the fee rate for all loaded wallets. (See added test case)
Tree-SHA512: 4ab6ec2f5c714742396ded5e451ec3b1ceb771e3696492de29889d866de4365b3fbe4a2784d085c8b8bd11b1ebb8a1fec99ab2c62eee716791cfc67c0cf29e1b
cead28b [docs] Add release notes for deprecated 'account' API (John Newbery)
72c9575 [wallet] [tests] Add tests for accounts/labels APIs (John Newbery)
109e05d [wallet] [rpc] Deprecate wallet 'account' API (John Newbery)
3576ab1 [wallet] [rpc] Deprecate account RPC methods (John Newbery)
3db1ba0 [tests] Set -deprecatedrpc=accounts in tests (John Newbery)
4e671f0 [tests] Rename rpc_listtransactions.py to wallet_listtransactions.py (John Newbery)
a28b907 [wallet] [rpc] Remove duplicate entries in rpcwallet.cpp's CRPCCommand table (John Newbery)
Pull request description:
Deprecate all accounts functionality and make it only accessible by using `-deprecatedrpc=accounts`.
Accounts specific RPCs, account arguments, and account related results all require the `-deprecatedrpc=accunts` startup option now in order to see account things.
Several wallet functional tests use the accounts system. Those tests are unchanged, except to start the nodes with `-deprecatedrpc=accounts`. We can slowly migrate those tests to use the 'label' API instead of the 'account' API before accounts are fully removed.
Tree-SHA512: 89f4ae2fe6de4a1422f1817b0997ae22d63ab5a1a558362ce923a3871f3e42963405d6573c69c27f1764679cdee5b51bf52202cc407f1361bfd8066d652f3f37
3ee4be1 Make tests pass after 2020 (Bernhard M. Wiedemann)
Pull request description:
Make tests pass after 2020
and also test that 64 bit integers are properly handled
Without this patch, the failure was
```
unknown location(0): fatal error: in "rpc_tests/rpc_ban": std::runtime_error: JSON value is not an object as expected
test/rpc_tests.cpp(260): last checkpoint
```
I found this when testing reproducible builds for openSUSE Linux packages, building 15 years from now (this is the expected lifespan of today's software)
There is 1 other issue in ./src/qt/test/paymentservertests.cpp that fails to verify a cert that expires in 2022 after 10y.
```
QWARN : PaymentServerTests::paymentServerTests() PaymentRequestPlus::getMerchant: Payment request: certificate expired or not yet active: QSslCertificate("3", "01", "Ipbt+DxK8RDQd25/5ueXqw==", (), ("Payment Request Test Merchant"), QMap(), QDateTime(2012-12-10 16:37:24.000 UTC Qt::TimeSpec(UTC)), QDateTime(2022-12-08 16:37:24.000 UTC Qt::TimeSpec(UTC)))
FAIL! : PaymentServerTests::paymentServerTests() Compared values are not the same
```
Tree-SHA512: d6c49879b6abbddbecc1168ac24c2d4f4ee9949b615607b3e6ba350c415136017f32cd112708791b063a2f2dc1b12f295f4ee55a346bd2128aa6480088d8db48
1accfbc Output values for "min relay fee not met" error (Kristaps Kaupe)
Pull request description:
It is already done this way for "mempool min fee not met" error.
Tree-SHA512: 829db78ecc066cf93b8e93ff1aeb4e7b98883cf45f341d5be6e6b4dff4135f3f54fa49b3a6f12eb43f676a9ba54f981143c9887f786881e584370434a9566cfd
aee80b0ef9 qt: Don't log to console by default (Wladimir J. van der Laan)
Pull request description:
Default `-printtoconsole` to false for the GUI. GUI programs should not print to the console unnecessarily. For example, when launched by the window manager, the output might end up in the X session log file,
resulting in duplicate logging. On Windows, it is pointless as well because bitcoin-qt isn't a console application.
This same mechanism is used to set `-server` to true by default for bitcoind: https://github.com/bitcoin/bitcoin/blob/master/src/bitcoind.cpp#L116
(fixes#13004)
Tree-SHA512: 24ae460d9d97130a063f7bf7fa6da1e6cc46643a94ea0827aa64d0f4a80647e5e7394695b24ea0f49a147a1fa07329659d224f04511fc24b97a9869d1c29b890
54a5a21 [MOVEONLY] Turn CScript::GetOp2 into a function and move to cpp (Pieter Wuille)
6a7456a [MOVEONLY] Move CSCript::FindAndDelete to interpreter (Pieter Wuille)
33a8ecf Delete unused non-const-iterator CSCript::GetOp overloads (Pieter Wuille)
2fb168b Make iterators in CScript::FindAndDelete const (Pieter Wuille)
Pull request description:
This PR moves `FindAndDelete` and `GetOp2` out of CScript (the first is only used inside the interpreter and moved there, the second does not actually depend on any script specifics and works on any vector). Furthermore, all non-const-iterator versions of GetOp are replaced by const ones, removing a number of methods in the process.
The longer term goal here is making the script interpreter independent from the CScript representation.
Note for reviewers: both `FindAndDelete` and `GetScriptOp` are consensus critical.
Tree-SHA512: c4ccf91c0b33c37cff0d474aa8dd2dab25b5b7655e2ed69a9b15e29daf0a67b21d51c23e1defb3a72ec762bd6138de96f69c6db1fb9c1fe1e976e421261aedb7
1f83839 [wallet] [tests] Test disallowed multiwallet params (John Newbery)
3476e3c [wallet] Fix zapwallettxes/multiwallet interaction. (John Newbery)
Pull request description:
`-zapwallettxes` should be disallowed when starting bitcoin in multiwallet mode.
There's code in `WalletInit::ParameterInteraction()` to disallow `-zapwallettxes` when running in multiwallet mode. This code functioned as expected when passing the parameter `-zapwallettxes=1`, but not when passing the parameter `-zapwallettxes` (ie without the value specified). Fix that and add a test.
The new test in the
_[wallet] [tests] Test disallowed multiwallet params_ commit reproduces the bug and should fail against master.
Fixes#12505
Tree-SHA512: 6cd921717e9c7d2773ca84c946c310c2adec8430e37cbecdb33a620f510db3058a72bd328411812ba415111bc52a3367b332c9d15a37a92ccfd7ae785d2f32ab
0851a75 rpc: Interrupt block generation on shutdown request (João Barbosa)
Pull request description:
With this simple change, after running `bitcoin-cli -regtest generate 100000`, it is possible to interrupt `bitcoind` cleanly without waiting for the generation to complete.
Tree-SHA512: f0f7cdde242e595cfdaea31ae8bddbc25933621b63f639e813d272c2b00ce2ef52f0c14ae44954ba8c49f0fc846bcc3bfd5419e52b3347a68bb0341ce6b02d26
18326ae [doc] Add comments for chainparams.h, validation.cpp (James O'Beirne)
Pull request description:
Added a few comments during a leisurely read through some of the validation code. If this kind of thing seems useful, I can add similar documentation for most of the `CChainState` interface.
Tree-SHA512: a4d9db60383a8ff02e74ac326ed88902eec1ee441e8cd4e1845bcf257072673c15974225288cebf0a633e76a3410f99e2206616b4694725a2a5b0d19c78327d6
e4d0b44 Consistently log CValidationState on failure (Ben Woosley)
Pull request description:
This replaces potential silent failures and partial logging with full logging. Seems providing at least minimal visibility to the failure is a good practice. E.g. `FlushStateToDisk` can return a rare but meaningful out of disk space error that would be better to note than leave out.
Note many of these are related to `ActivateBestChain` or `FlushStateToDisk`. Only a few cases of ignored state remain, e.g. LoadExternalBlockFile and RelayWalletTransaction, where I expect logging would likely be spammy.
Tree-SHA512: fb0e521039e5a5250cd9c82e7a8676423b5e3899d495649c0e71752059d1984e5175f556386ade048f51a7d59f5c8e467df7fe91d746076f97d24c000ccf7891
cf02779 Add logging and error handling for file syncing (Wladimir J. van der Laan)
Pull request description:
Add logging and error handling inside, and outside of FileCommit.
Functions such as fsync, fdatasync will return error in case of hardware I/O errors, and ignoring this means it can silently continue through data corruption.
(c.f. https://lwn.net/SubscriberLink/752063/12b232ab5039efbe/)
EINVAL is handled specially to avoid crashing out on (network, fuse) filesystems that don't handle `f[data]sync`.
I checked that the syncing inside leveldb is already generating an I/O error as appropriate.
Tree-SHA512: 64cc9bbedca3ecc97ff4bac0a7b7ac6526a7ed763c66f6786d03ca4f2e9e366e42b152cb908299c060448d98ca39ff03395280bffaca51d592e728aa2516f5dd
Add logging and error handling inside, and outside of FileCommit.
Functions such as fsync, fdatasync will return error in case of hardware
I/O errors, and ignoring this means it can silently continue through
data corruption. (c.f.
https://lwn.net/SubscriberLink/752063/12b232ab5039efbe/)
3cc9094 scripted-diff: Rename CChainState::g_failed_blocks to m_failed_blocks (Ben Woosley)
Pull request description:
To reflect its actual status as a member rather than a global value.
g_failed_blocks was previously global: 2862aca40f
Tree-SHA512: a0e679a151e0fb70d245a7a1821449d0a4738f5ba503abca9f19d9cfbcbb0e72a1598e3364e29775b0c203acd6d04d882d2788208f685edc57aaba5e946fde3b
Default `-printtoconsole` to false for the GUI. GUI programs should not
print to the console unnecessarily. For example, when launched by the
window manager, the output might end up in the X session log file,
resulting in duplicate logging. On Windows, it is pointless as well
because bitcoin-qt isn't a console application.
3c058fd wallet: Add HasWallets (João Barbosa)
373aee2 wallet: Add AddWallet, RemoveWallet, GetWallet and GetWallets (João Barbosa)
6efd964 refactor: Drop CWalletRef typedef (João Barbosa)
Pull request description:
This is a small step towards dynamic wallet load/unload. The wallets *registry* `vpwallets` is used in several places. With these new functions all `vpwallets` usage are removed and `vpwallets` is now a static variable (no external linkage).
The typedef `CWalletRef` is also removed as it is narrowly used.
Tree-SHA512: 2ea19da2e17b521ad678bfe10f3257e497ccaf7ab9fd0b6647f9d829f1d6131cfa68db8e8492421711c6da399859432b963a568bdd4ca40a77dd95b597839423
150b2f0 Default to defining endian-conversion DECLs in compat w/o config (Matt Corallo)
Pull request description:
While this isn't a supported build configuration, some build
systems need to build without going through our autotools steps,
so defaulting to something sane may make it easier to build.
Specifically, this fixes the inability to build
rust-bitcoinconsensus on some non-x86 platforms. It needs to build
without our autotools/configure steps to ensure correct compile
args are passed from the rust build system to gcc. Converting the
args from the rust build system to gcc would be a lot of
unmaintainable work.
Tree-SHA512: 776fdb8c91b66f421fc751cb281c99c53c47e496f46b26c9f49bb6fdb6da3d2dda5dcc1c5bf413206bdd9ff3cbe5cef2823455900462519a4944631d9c48b54c
b77b6e2345 MOVEONLY: Move logging code from util.{h,cpp} to new files. (Jim Posen)
Pull request description:
Split out first commit from #12954 to reduce amount of rebasing necessary.
This introduces a cyclic dependency between `logging` and `util` that should be cleaned up in a future PR.
Tree-SHA512: 695e512f9c2f7b4ca65e367fc924358e3cb2dc531bcbb7a6f62710b2a87280b35aba7793aa272e457fcd65448abe3feb1deb3b8064ed208917ca356b0f410813
Such outputs can still be watched, and signed for, but they aren't treated as valid payments.
That means they won't cause transactions to appear in listtransactions, their outputs to be
shown under listunspent, or affect balances.
Inside IsMine we care about the distinction between scriptPubKey execution
and P2SH redeemScript execution. The consensus code does not care about this
distinction, and thus SigVersion does not have a field for P2SH. As the IsMine
code will care, it uses a separate enum with more fields.
Only IsMine's internal code needs this, as part of a recursion into P2SH and P2WSH
scripts. The exposed functions always operate on actual scriptPubKeys and not on
redeemScripts or witness scripts.
8b56fc0b91 [qa] Test that v0 segwit outputs can't be spent pre-activation (Suhas Daftuar)
ccb8ca42a4 Always enforce SCRIPT_VERIFY_WITNESS with P2SH (Suhas Daftuar)
5c31b20a35 [qa] Remove some pre-activation segwit tests (Suhas Daftuar)
95749a5836 Separate NULLDUMMY enforcement from SEGWIT enforcement (Suhas Daftuar)
ce650182f4 Use P2SH consensus rules for all blocks (Suhas Daftuar)
Pull request description:
As discussed at the IRC meeting back in October (https://botbot.me/freenode/bitcoin-core-dev/2017-10-12/?msg=92231929&page=2), I had looked into the feasibility of enforcing P2SH and SCRIPT_VERIFY_WITNESS back to the genesis block.
The P2SH change is pretty straightforward -- there was only one historical block on mainnet that violated the rule, so I carved out an exception to it, similar to the way we have exceptions for the BIP30 violators.
The segwit change is not entirely as clear. The code changes themselves are relatively straightforward: we can just always turn on SCRIPT_VERIFY_WITNESS whenever P2SH is active. However conceptually, this amounts to splitting up BIP141 into two parts, the part that implements new script rules, and the part that handles witness commitments in blocks.
Arguably though the script rules are really defined in BIP 143 anyway, and so this really amounts to backdating BIP 143 -- script rules for v0 segwit outputs -- back to genesis. So maybe conceptually this isn't so bad...
I don't feel strongly about this change in either direction; I started working on it because I was searching for a way to simplify the way we understand and implement the consensus rules around segwit, but I'm not yet sure whether I think this achieves anything toward that goal.
ping @TheBlueMatt
Tree-SHA512: 73551d4a983eb9792c7ac67f56005822528ac4d1fd52c27cee6d305ebee953f69687ef4ddee8bdc0fec77f77e6b5a9d669750793efee54c076533a095e233042
2c084a6 net: Minor accumulated cleanups (Thomas Snider)
Pull request description:
From now-derelict larger changes I had been working on, here are a series of DRY refactors/cleanups. Net loss of 35 lines of code - a small step in the good fight.
In particular I think operator!= should only ever be implemented as a negation of operator==. Lower chance for errors, and removes the possibility of divergent behavior.
Tree-SHA512: 58bf4b542a4e8e5bc465b508aaa16e9ab51448c3f9bee52cd9db0a64a5c6c5a13e4b4286d0a5aa864934fc58064799f6a88a40a87154fd3a4bd731a72e254393
1bf3f33b46 node: Removed unused wallet-related methods from the Node interface. (Thomas Snider)
b38200459f benchmark: Removed bench/perf.cpp (Thomas Snider)
Pull request description:
Not sure if these should be separate PRs.
First is removal of a platform abstraction for getting cycle counters where possible. Since the benchmarking switch to counting number of iterations over a fixed window instead of counting cycles per iteration, these are unused.
Second is removal of a few methods from the Node interface that seem vestigial from when the concepts of wallet/node were not as clearly separated.
Tree-SHA512: de1460a7d4473ca19db4e2ca845185c63c765d12462c2685044a1f27dedab266cd908bc52235a881a7ad98bc251a4abf4eae523e5f599c169e3511e489f19a0d
Seems providing at least minimal visibility to the failure is a good practice.
The only remaining ignored state is in LoadExternalBlockFile, where logging
would likely be spammy.
To reflect its actual status as a member rather than a global value.
g_failed_blocks was previously global: 2862aca40f
-BEGIN VERIFY SCRIPT-
sed -i 's/g_failed_blocks/m_failed_blocks/g' src/validation.cpp
-END VERIFY SCRIPT-
9e50c337c Note new weight field in release-notes. (Matt Corallo)
d0d9112b7 Test new weight field in p2p_segwit (Matt Corallo)
2874709a9 Expose a transaction's weight via RPC (Matt Corallo)
Pull request description:
This seems like an obvious oversight.
Tree-SHA512: defd047de34fb06a31f589e1a4eef68fcae85095cc67b7c8fb434237bb40300d7f3f97e852d3e7226330e26b96943846b7baf6da0cfc79db8d56e9c1f7848ad9
fae58eca93 tests: Avoid copies of CTransaction (MarcoFalke)
Pull request description:
Avoid the copy (or move) constructor of `CTransaction` in test code, whereever a simple reference can be used instead.
Tree-SHA512: 8ef2077a277d6182996f4671722fdc01a90909ae7431c1e52604aab8ed028910615028caf9b4cb07a9b15fdc04939dea2209cc3189dde7d38271256d9fe1076c
This commit finalizes the deprecation of the wallet 'accounts' API by
removing all account arguments and return values.
RPC behaviour is slightly different if the 'accounts' or 'labels' API is
being used. Those behaviour changes are fully documented in the RPC help
text.
All account RPC methods are now deprecated and can only be called if
bitcoind has been started with the -deprecatedrpc=accounts switch.
Affected RPC methods are:
- getaccount
- getaccountaddress
- getaddressesbyaccount
- getreceivedbyaccount
- listaccouts
- listreceivedbyaccount
- move
- setaccount
6a3b0d3 Print to console by default when not run with -daemon (Evan Klitzke)
Pull request description:
Cherry-picked ef6fa1c38e1bd115d1cce155907023d79da379d8 from the "up for grabs" PR: "Smarter default behavior for -printtoconsole" (#12689).
See previous review in #12689.
Tree-SHA512: 8923a89b9c8973286d53e960d3c464b1cd026cd5a5911ba62f9f972c83684417dc4004101815dfe987fc1e1baaec1fdd90748a0866bb5548e974d77b3135d43b
Various changes:
* Don't check $GCC and $GXX
* Prefer -Og instead of -O0
* If -g3 isn't available, use -g
This also incidentally fixes compiler warnings with GCC and glibc when using
--enable-debug, as the old default values mixed poorly with the hardening flags.
c25321f Add config changes to release notes (Anthony Towns)
5e3cbe0 [tests] Unit tests for -testnet/-regtest in [test]/[regtest] sections (Anthony Towns)
005ad26 ArgsManager: special handling for -regtest and -testnet (Anthony Towns)
608415d [tests] Unit tests for network-specific config entries (Anthony Towns)
68797e2 ArgsManager: Warn when ignoring network-specific config setting (Anthony Towns)
d1fc4d9 ArgsManager: limit some options to only apply on mainnet when in default section (Anthony Towns)
8a9817d [tests] Use regtest section in functional tests configs (Anthony Towns)
30f9407 [tests] Unit tests for config file sections (Anthony Towns)
95eb66d ArgsManager: support config file sections (Anthony Towns)
4d34fcc ArgsManager: drop m_negated_args (Anthony Towns)
3673ca3 ArgsManager: keep command line and config file arguments separate (Anthony Towns)
Pull request description:
The weekly meeting on [2017-12-07](http://www.erisian.com.au/meetbot/bitcoin-core-dev/2017/bitcoin-core-dev.2017-12-07-19.00.log.html) discussed allowing options to bitcoin to have some sensitivity to what network is in use. @theuni suggested having sections in the config file:
<cfields> an alternative to that would be sections in a config file. and on the
cmdline they'd look like namespaces. so, [testnet] port=5. or -testnet::port=5.
This approach is (more or less) supported by `boost::program_options::detail::config_file_iterator` -- when it sees a `[testnet]` section with `port=5`, it will treat that the same as "testnet.port=5". So `[testnet] port=5` (or `testnet.port=5` without the section header) in bitcoin.conf and `-testnet.port=5` on the command line.
The other aspect to this question is possibly limiting some options so that there is no possibility of accidental cross-contamination across networks. For example, if you're using a particular wallet.dat on mainnet, you may not want to accidentally use the same wallet on testnet and risk reusing keys.
I've set this up so that the `-addnode` and `-wallet` options are `NETWORK_ONLY`, so that if you have a bitcoin.conf:
wallet=/secret/wallet.dat
upnp=1
and you run `bitcoind -testnet` or `bitcoind -regtest`, then the `wallet=` setting will be ignored, and should behave as if your bitcoin.conf had specified:
upnp=1
[main]
wallet=/secret/wallet.dat
For any `NETWORK_ONLY` options, if you're using `-testnet` or `-regtest`, you'll have to add the prefix to any command line options. This was necessary for `multiwallet.py` for instance.
I've left the "default" options as taking precedence over network specific ones, which might be backwards. So if you have:
maxmempool=200
[regtest]
maxmempool=100
your maxmempool will still be 200 on regtest. The advantage of doing it this way is that if you have `[regtest] maxmempool=100` in bitcoin.conf, and then say `bitcoind -regtest -maxmempool=200`, the same result is probably in line with what you expect...
The other thing to note is that I'm using the chain names from `chainparamsbase.cpp` / `ChainNameFromCommandLine`, so the sections are `[main]`, `[test]` and `[regtest]`; not `[mainnet]` or `[testnet]` as might be expected.
Thoughts? Ping @MeshCollider @laanwj @jonasschnelli @morcos
Tree-SHA512: f00b5eb75f006189987e5c15e154a42b66ee251777768c1e185d764279070fcb7c41947d8794092b912a03d985843c82e5189871416995436a6260520fb7a4db
While this isn't a supported build configuration, some build
systems need to build without going through our autotools steps,
so defaulting to something sane may make it easier to build.
Specifically, this fixes the inability to build
rust-bitcoinconsensus on some non-x86 platforms. It needs to build
without our autotools/configure steps to ensure correct compile
args are passed from the rust build system to gcc. Converting the
args from the rust build system to gcc would be a lot of
unmaintainable work.
0ef7b40 [doc] Fix comment in FindForkInGlobalIndex (James O'Beirne)
Pull request description:
The comment erroneously implies that we're searching `chainActive` for the
first block common to `locator`, but we're using the parameter `chain`.
Tree-SHA512: 42ba0fb378597820bdf1eaff1e3e284097baa312e7dd8448421c8c71aa91c353ea6c840860afcb7725f392431f3134d4feb271b96ab7058a62f84f48e468e714
1527015 Avoid std::locale/imbue in DateTimeStrFormat (Pieter Wuille)
Pull request description:
And replace them with just hardcoded ISO8601 strings and `gmtime_r`.
Pointed out by @laanwj here: https://github.com/bitcoin/bitcoin/pull/12970#issuecomment-380962488
Tree-SHA512: a459758b42ca56f8462115aefe8e6377c1319fce509ea64dbb767f3f087c9b848335954cb684e5896c38008847684045505a3e1559fb3e83b8e80e10b003d1e7
Suggested formatting for namespaces in the developer guide is currently
inconsistent. This commit updates the developer guide and clang-format
configuration to consistently put "namespace" and opening/closing braces
on the same line. Example:
```c++
namespace boost {
namespace signals2 {
class connection;
} // namespace signals2
} // namespace boost
```
Currently the "Source code organization" section has an example like the one
above, but the "Coding style" section example and description put a newline
between the opening "namespace foo" and brace (but oddly no newline between
closing namespace and brace).
Avoiding newlines before namespace opening braces makes nested declarations
less verbose and also avoids asymmetry with closing braces. It's also a
common style used in other codebases:
* https://google.github.io/styleguide/cppguide.html#Namespaces
* https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Coding_Style#Classes
* https://llvm.org/docs/CodingStandards.html#namespace-indentation
ae1d2b030 Give an error when rescan is aborted by the user (Andrew Chow)
69b01e6f8 Add cancel button to rescan progress dialog (Andrew Chow)
Pull request description:
A cancel button is added to the `showProgress` dialog that is used only for rescans. When clicked, `AbortRescan` is called directly to cancel the rescan.
Rescans triggered from the debug console will now be cancelable by clicking the cancel button.
Rescans triggered by a command (e.g. `importmulti`) will now give an error indicating that the rescan was aborted by the user (either by the `abortrescan` command or by clicking cancel).
Tree-SHA512: 4bb14998766de686e2318fbc9805758eccf5dbe628a7257d072c9ae2fb4f61303a0876f49988d6e5eddb261969b8a307c81c0c2df0a42ae909a43d738af3dc1b
fa72f34 bitcoin-tx: Remove unused for loop (MarcoFalke)
Pull request description:
This flattens out a for loop and gets rid of the then unused vector `txVariants`.
Tree-SHA512: 68081b313d846ce235a97a642c9d0097c3641350e819d6254001f332b053e41fa63ce49faca68120f5aaf5d5f4bfda104662eae781e2956d76a8915770344045
This commit moves P2SH activation back to the genesis block, with
a hardcoded exception for the one historical block in the chain that
violated this rule.
339730a6d8 logging: bypass timestamp formatting when not logging (Cory Fields)
Pull request description:
As suggested by @laanwj on IRC:
```
<cfields> whoa
<cfields> Leaving test case "knapsack_solver_test"; testing time: 358694ms
<cfields> i386 + old wine ^^
<cfields> Leaving test case "knapsack_solver_test"; testing time: 6781ms
<cfields> ^^ same, but with the LogPrint commented out
...
<wumpus> if both log-to-file and log-to-console is disabled, it should probably bypass all logging
```
Edit: The painful line commented out being the LogPrintf in CWallet::AddToWallet.
Tree-SHA512: bc6da67dcdf05e9164fff7a7e9980de897e6f1b0d3f6e1ebde2162cbcba7d54a6ec94283534eb5a1ebde7134533d7fe7e496aa35ea3128c567ed6483eae5212c
4a6c0e3dcf Modernize best block mutex/cv/hash variable naming (Pieter Wuille)
45dd135039 Fix csBestBlock/cvBlockChange waiting in rpc/mining (Pieter Wuille)
Pull request description:
This is an alternative to #11694.
It reintroduces a uint256 variable with the best block hash, protected by csBestBlock, and only updated while holding it.
Also rename the involved variable to modern guidelines, as there are very few uses.
Tree-SHA512: 826a86c7d3cee7fe49f99f4398ae99e81cb0563197eaeba77306a3ca6072b67cdb932bc35720fc0f99c2a57b218efa029d0b8bdfb240591a629b2e90efa3199d
be67831 Make DummySignatureCreator a singleton (Pieter Wuille)
190b8d2 Make BaseSignatureCreator a pure interface (Pieter Wuille)
Pull request description:
* Removes the `m_provider` field from `BaseSignatureCreator`. Instead both a `SigningProvider` (which provides keys and scripts) and a `BaseSignatureCreator` (which implements the transaction-specific (or other) signing logic) are passed into and down in `ProduceSignature`, making the two concepts orthogonal.
* Makes `BaseSignatureCreator` a pure interface without constructor, making it easier to implement new derivations of it (for example for message signing).
* As `DummySignatureCreator` now becomes a stateless object, turn it into a singleton `DUMMY_SIGNATURE_CREATOR`.
Tree-SHA512: 5f1f4512e4ea7d02a31df7b9ede55008efa716c5b74a2630ca1c2fc6599584d8bf5f5641487266127f4b3788033803539fbd22b03ef1219c83c10da2d3da3dcd
72ec5b7 debug log number of unknown wallet records on load (Gregory Sanders)
Pull request description:
This would have saved me some time during wallet debugging, with minimal logging clutter.
Tree-SHA512: e11a4d73a5b1d2bd73fe7b75b62fdfa127e21b8641c5b0c76f14ecd292ab374c0d4749f6bd99919b2b3e9cb00c3b5e8179386eb39ac656698306b3b545ee79f1
05c03d1249 rpc: fix type mistmatch in listreceivedbyaddress (joemphilips)
Pull request description:
`txids` filed in return value is supposed be `string` but it was `numeric` in the help message
Tree-SHA512: 7d860994c2d1d9149b41fd7afefc1a44460eede5a023070fcc18b0a4a19a26c5eec5abd157038c15fe7d50a3390bdaf7a4823279129eb1458b0d3c6141a533ee
cab0824 Logprint the start of a rescan (Jonas Schnelli)
Pull request description:
Right now, there is no log entry when a rescan starts which is confusing especially when a "still rescanning" log entry appears after the log-update timeout of 60s or when user manually aborts the rescan.
This PR adds a log entry when a rescan starts.
Tree-SHA512: 8712605af6fd60950bf3904cfb586da6022e44b3da6f3155fe4f02aae16df6044bc504b3d48945ea6d7fe768f0c6cb3282a2e2251d14bf3b7f1dcbd12568b05e
459ea58 rpc: Drop redundant testing of signrawtransaction prevtxs args (Ben Woosley)
Pull request description:
These other types are already tested on line 736.
Tree-SHA512: 2efe777c8a63c69ffe0fafcb2f37f134d324a8bc9525510f1079d2215535b511d6308e5e6eec702a3444f87701236c5e7a22f10bb24e5a454010ef421e5ae900
0000d8f Document how FlushStateMode::NONE is handled (practicalswift)
2311c7c Call FlushStateToDisk(...) regardless of fCheckForPruning (practicalswift)
Pull request description:
FlushStateToDisk(...) won't do anything besides check if we need to prune if
FLUSH_STATE_NONE is given. We avoid reading the variable fCheckForPruning
which is guarded by the mutex cs_LastBlockFile.
Tree-SHA512: 89df06256f73503a74b9e26d580ce9ed09efaef347fae1ff6a5759a2993b0db52edd2fadb65694d27e579a5aed92127753bdf41b5bb1bd516e577fcf17f17999
When network-specific options such as -addnode, -connect, etc are
specified in the default section of the config file, but that setting is
ignored due to testnet or regtest being in use, and it is not overridden
by either a command line option or a setting in the [regtest] or [test]
section of the config file, a warning is added to the log, eg:
Warning: Config setting for -connect only applied on regtest network when in [regtest] section.
When specified in bitcoin.conf without using the [regtest] or [test]
section header, or a "regtest." or "test." prefix, the "addnode",
"connect", "port", "bind", "rpcport", "rpcbind", and "wallet" settings
will only be applied when running on mainnet.
When a -nofoo option is seen, instead of adding it to a separate
set of negated args, set the arg as being an empty vector of strings.
This changes the behaviour in some ways:
- -nofoo=0 still sets foo=1 but no longer treats it as a negated arg
- -nofoo=1 -foo=2 has GetArgs() return [2] rather than [2,0]
- "foo=2 \n -nofoo=1" in a config file no longer returns [2,0], just [0]
- GetArgs returns an empty vector for negated args
c55aa4f test: Fix sign for expected values (Karl-Johan Alm)
Pull request description:
A number of `BOOST_CHECK_EQUAL` calls would result in warnings about signs.
This PR fixes signedness for all expectation values, sometimes resulting in `int` → `unsigned int`. No other code changes besides adding/removing `U` to/from values.
Running `make &> make_output_...` on master versus on this PR:
```
$ wc make_output_*
1464 5925 90357 make_output_master
613 1469 28370 make_output_signfixed
```
More than halves the output lines from compiling.
Tree-SHA512: b06c9fb81704fd32a6a61fe7b2ceb5f1bb381e9873d79e13d7e4d26bbd9b67c9725a84e6fb2903bcda775aea2a792e544b0799d36735c19f5d1c7225e8c6d14e
40c5886 Fix illegal default `addProxy` and `addrSeparateProxyTor` settings. (251)
Pull request description:
In f05d349 the value of the `addrProxy` and `addrSeparateProxyTor` settings is set to an illegal default value, because the value of `DEFAULT_GUI_PROXY_PORT ` is passed to the `fieldWidth` parameter of the `QString QString::arg(const QString &a, int fieldWidth = 0, QChar fillChar = QLatin1Char( ' ' )) const` method:
29fad97c32/src/qt/optionsmodel.cpp (L129)29fad97c32/src/qt/optionsmodel.cpp (L139)
This will create a default proxy setting that consists of 9053 characters and ends with the string `127.0.0.1:%2`.
This PR attempts to resolve#12623 by setting the correct value for the `addrProxy` and `addrSeparateProxyTor` settings (i) if the proxy setting does not exist; or (ii) if the proxy setting has an illegal value caused by to the aforementioned bug.
The second condition is *only* relevant if we don't want Bitcoin Core 0.16.0 users to explicitly reset their settings to see the correct default proxy port value.
Tree-SHA512: 3dc3de2eb7da831f6e318797df67341ced2076b48f9b561c73677bf6beb67b259d8e413095f290356fb92e32e4e8162d48accbc575c4e612060fd5d6dde7ac8d
ece88fd Introduce BigEndian wrapper and use it for netaddress ports (Pieter Wuille)
Pull request description:
This is another small improvement taken from #10785.
Instead of manually converting from/to BE format in the `CService` serializer, provide a generic way in serialize.h to serialize BE data (only 16 bits for now).
Tree-SHA512: bd67cf7eed465dad08551fb62f659e755e0691e4597a9f59d285d2b79975b50e5710d35a34a185b5ad232e1deda9a4946615f9132b1ed7d96ed8087f73ace66b
FlushStateToDisk(...) won't do anything besides check if we need to prune if
FLUSH_STATE_NONE is given. We avoid reading the variable fCheckForPruning
which is guarded by the mutex cs_LastBlockFile.
12e7c55 Ignore macOS daemon() depracation warning (Jonas Schnelli)
Pull request description:
`daemon()` is deprecated on OSX since 10.5 (should migrate to `posix_spawn()`). There are no signs `daemon()` will get removed by Apple.
Tree-SHA512: d5bcdc5d6b507576e0358906a73f9c766f2072f4a9aef6bdc559e10dbec95337ffa50a1ccb60f7197591e2e74f87c74c13387de880aaedc6dbf3796253f69561
41ba061 [docs] Add release notes for wallet 'label' API. (John Newbery)
189e0ef [wallet] [rpc] introduce 'label' API for wallet (Wladimir J. van der Laan)
Pull request description:
Add label API to wallet RPC.
This is one step towards #3816 ("Remove bolt-on account system") although it doesn't
actually remove anything yet.
These initially mirror the account functions, with the following differences:
- These functions aren't DEPRECATED in the help
- Help mentions 'label' instead of accounts. In the language used, labels are
associated with addresses, instead of addresses associated with labels. (unlike
with accounts.)
- Labels have no balance
- No balances in `listlabels`
- `listlabels` has no minconf or watchonly argument
- Like in the GUI, labels can be set on any address, not just receiving addreses
- Unlike accounts, labels can be deleted.
Being unable to delete them is a common annoyance (see #1231).
Currently only by reassigning all addresses using `setlabel`, but an explicit
call `deletelabel` which assigns all address to the default label may make
sense.
Tree-SHA512: 45cc313c68ad529ce3a15c02181d2ab0083a7e14fe824e2cde34972713fecce512e3d4b9aa46db5355f2baa857c44b234d4fe9709225bc23c7ebbc0e03febbf5
Add label API to wallet RPC.
This is one step towards #3816 ("Remove bolt-on account system") although it doesn't
actually remove anything yet.
These initially mirror the account functions, with the following differences:
- These functions aren't DEPRECATED in the help
- Help mentions 'label' instead of accounts. In the language used, labels are
associated with addresses, instead of addresses associated with labels. (unlike
with accounts.)
- Labels have no balance
- No balances in `listlabels`
- `listlabels` has no minconf or watchonly argument
- Like in the GUI, labels can be set on any address, not just receiving addreses
- Unlike accounts, labels can be deleted.
Being unable to delete them is a common annoyance (see #1231).
Currently only by reassigning all addresses using `setlabel`, but an explicit
call `deletelabel` which assigns all address to the default label may make
sense.
Thanks to Pierre Rochard for test fixes.
818dc74 Support serialization as another type without casting (Pieter Wuille)
Pull request description:
This adds a `READWRITEAS(type, obj)` macro which serializes `obj` as if it were converted to `const type&` when `const`, and to `type&` when non-`const`. No actual cast is involved, so this only works when this conversion can be done automatically.
This makes it usable in serialization code that uses a single implementation for both serialization and deserializing, which doesn't know the constness of the object involved.
This is a redo of #12712, using a slightly different interface.
Tree-SHA512: 262f0257284ff99b5ffaec9b997c194e221522ba35c3ac8eaa9bb344449d7ea0a314de254dc77449fa7aaa600f8cd9a24da65aade8c1ec6aa80c6e9a7bba5ca7
f526046 adapt bumpfee change discard test to be more strict and add note on p2sh discrep (Gregory Sanders)
5805d6f feebumper: discard change outputs below discard rate (Gregory Sanders)
Pull request description:
The "discard rate" is the concept we use to ensure the wallet isnt creating not so useful just-above-relay dust.
Outside of bumpfee previous to this PR, and manually creating such an output, the wallet will never make change outputs of that size, preferring to send them to fees instead.
"Worst case" for the user is that users pay a slightly higher feerate than they were expecting, which is already a possibility with relay dust.
Tree-SHA512: dd69351810dc1709437602e7db1be46e4e905ccd8e16d03952de8b4c1fdbf9cb7e6c99968930896baf6b5c7cb005a03ec0506a2669d22e21e32982e60329606b
Makes the build warning-clean again here:
bitcoin/src/interfaces/wallet.cpp:425:18: warning: lambda capture 'this' is not used [-Wunused-lambda-capture]
[fn, this](CWallet*, const uint256& txid, ChangeType status) { fn(txid, status); }));
^
7ef9cd8 Increase entropy in test temp directory name (Pieter Wuille)
f6dfb0f Reorder travis builds (Pieter Wuille)
156db42 tests: run tests in parallel (Cory Fields)
66f3255 tests: split up actual tests and helper files (Cory Fields)
Pull request description:
This runs the unit tests (`src/test/test_bitcoin`) in 4 separate simultaneous processes, significantly speeding up some Travis runs (over 2x for win32).
This uses an approach by @theuni that relies on `make` as the mechanism for distributing tests over processes (through `-j`). For every test .cpp file, we search for `BOOST_FIXTURE_TEST_SUITE` or `BOOST_AUTO_TEST_SUITE`, and then invoke the test binary for just that suite (using `-t`). The (verbose) output is stored in a temporary file, and only shown in the case of failure.
Some makefile reshuffling is necessary to avoid trying to run tests from `src/test/test_bitcoin.cpp` for example, which contains framework/utility code but no real tests.
Finally, order the Travis jobs from slow to fast (apart from the arm/doc job which goes first, for fast failure). This should help reducing the total wall clock time before opening a PR and finishing Travis, in case where not all jobs are started simultaneously.
This is an alternative to #12831.
Tree-SHA512: 9f82eb4ade14ac859618da533c7d9df2aa9f5592a076dcc4939beeffd109eda33f7d5480d8f50c0d8b23bf3099759e9f3a2d4c78efb5b66b04569b39b354c185
Although no compiler appears to complain about it, these are
not valid for c++11.
(http://en.cppreference.com/w/cpp/language/aggregate_initialization says they're c++20)
The structure is defined as:
struct sched_param {
int sched_priority;
};
So passing 0 for the first field has the same effect.
Nowhere in the man page of `pthread_setschedparam` it is mentioned that
`0` is a valid value. The example uses `pthread_self()`, so should we.
(noticed by Anthony Towns)
9142dfea81 Use explicit casting in cuckoocache's compute_hashes(...) to clarify integer conversion (practicalswift)
Pull request description:
Use explicit casting in cuckoocache's `compute_hashes(...)` to clarify integer conversion.
I discussed this code with the code's author @JeremyRubin who suggested patching it to avoid any confusion.
At least one static analyzer incorrectly warns about a shift past bitwidth (UB) here, so this patch will help avoid confusion for human reviewers and static analyzers alike :-)
Tree-SHA512: 0419ee31b422d2ffedbd1a100688ec0ff5b0c1690d6d92592f638ca8db07a21a9650cb467923108c6f14a38d2bf07d6e6c85d2d1d4b7da53ffe6919f94f32655
c198dc00e1 [Doc] Clarify the meaning of fee delta not being a fee rate in prioritisetransaction RPC (Jan Čapek)
Pull request description:
Hi,
I have faced some confusion among our developers considering this being a fee rate. Would you consider including this tiny doc update?
Best regards,
Jan Capek
Tree-SHA512: cd0560540418e53c5c19ceab2d5aca229f4ef6b788b9543695742522e1c63a7f2cce2574b47fead098a106da2f77e297f0c728474565f6259b50d62369bbe7da
b120f7b [test] Add tests for self usage in arith_uint256 (Karl-Johan Alm)
08b17de [arith_uint256] Do not destroy *this content if passed-in operator may reference it (Karl-Johan Alm)
Pull request description:
Before this fix (see test commit), `v *= v` would result in `0` because `operator*=` set `*this` (`==b`) to `0` at the start. This patch changes the code to use `a` as temporary for `*this`~~, with drawback that `*this` is set to `a` at the end, an extra `=` operation in other words~~.
Tree-SHA512: 8028a99880c3198a39c4bcc5056169735ba960625d553e15c0317510a52940c875f7a1fefe14e1af7fcf10c07a246411994a328cb1507bf3eaf1b6e7425390dc
2b2b96cd45 Use std::bind instead of boost::bind to re-lock the wallet (Suhas Daftuar)
662d19ff72 [rpcwallet] Clamp walletpassphrase value at 100M seconds (Suhas Daftuar)
Pull request description:
Larger values seem to trigger a bug on macos+libevent (resulting in the rpc server stopping).
Tree-SHA512: 890f3b641f6c586e2f8f629a9d23bca6ceb8b237b285561aad488cb7adf941a21177d3129d0c2b8293c0a673cd8e401957dbe2b6b3b7c8c4e991bb411d260102
9272d70 Support serializing Span<unsigned char> and use that instead of FLATDATA (Pieter Wuille)
833bc08 Add Slice: a (pointer, size) array view that acts like a container (Pieter Wuille)
Pull request description:
Introduce a new data type `Span`, which is an encapsulated pointer + size (like C++20's `std::span` or LevelDB's `Slice`), and represents a view to a sequence of objects laid out continuously in memory.
The immediate use case is replacing the remaining `FLATDATA` invocations. Instead of those, we support serializing/deserializing unsigned char `Span`s (treating them as arrays).
A longer term goal for `Span`s is making the script execution operate on them rather than on `CScript` itself. This will allow separate storage mechanisms for scripts.
Tree-SHA512: 7b0da3c802e5df367f223275004d16b04262804c007b7c73fda927176f0a9c3b2ef3225fa842cb73500b0df73175ec1419f1f5239de2402e21dd9ae8e5d05233
77a733a99 [tests] Add additional unit tests for -nofoo edge cases (Anthony Towns)
af173c2be [tests] Check GetChainName works with config entries (Anthony Towns)
fa27f1c23 [tests] Add unit tests for ReadConfigStream (Anthony Towns)
087c5d204 ReadConfigStream: assume the stream is good (Anthony Towns)
6d5815aad Separate out ReadConfigStream from ReadConfigFile (Anthony Towns)
834d30341 [tests] Add unit tests for GetChainName (Anthony Towns)
11b6b5b86 Move ChainNameFromCommandLine into ArgsManager and rename to GetChainName (Anthony Towns)
Pull request description:
This does a bit of refactoring of the configuration handling code in order to add additional tests to make adding support for [test]/[regtest] sections in the config file in #11862 easier. Should not cause any behaviour changes.
Tree-SHA512: 8d2ce1449fc180de03414e7e569d1a21ba1e9f6564e13d3faf3961f710adc725fa0d4ab49b89ebd2baa11ea36ac5018377f693a84037d386a8b8697c9d6db3e9
0e7c52d Shut down if trying to connect a corrupted block (Suhas Daftuar)
Pull request description:
(Updated OP after reworking the approach)
Shut down if a corrupted block is found in ConnectBlock(). This prevents an infinite loop trying to connect such a block, and alerts the node operator that there may be potential hardware failure.
Tree-SHA512: f20d56aa9d36d6eeff4c3d13c0fbd14f06a57701bd13c2416d36f0cc4235f81f752139e336a073617e8e803782c5096c960108af122b19a51227de512e9095ee
d207207 [logging] add lint-logs.sh to check for newline termination. (John Newbery)
5c21e6c [logging] Comment all continuing logs. (John Newbery)
Pull request description:
Check that all calls to LogPrintf() are terminated by a newline,
except those that are explicitly marked as 'continued' logs.
Tree-SHA512: fe5162b2b2df1e8a4c807da87584fa9af97a6b8377e4090fe0caa136d90bf29a487a123cde94569bdce7101fee3478196d99aa13f1212e24bfe5f41c773604fc
d1b622b tests: Add check for test suite name uniqueness in lint-tests.sh (practicalswift)
dc8067b tests: Add note about uniqueness requirement for test suite names (practicalswift)
3ebfb2d tests: Avoid test suite name collision in wallet crypto_tests (MarcoFalke)
Pull request description:
* Add documentation: Add note about test suite name uniqueness requirement in developer notes
* Add regression test: Update `lint-tests.sh` to make it check also for test suite name uniqueness
Context: #12894 (`tests: Avoid test suite name collision in wallet crypto_tests`)
Tree-SHA512: 3c8502db069ef3d753f534976a86a997b12bac539e808a7285193bf81c9dd8c1b06821c3dd1bdf870ab87722b02c8aa9574c62ace70c2a1b8091785cb8c9aace
d54874d Set SCHED_BATCH priority on the loadblk thread. (Evan Klitzke)
Pull request description:
Today I came across #10271, and while reading the discussion #6358 was linked to. Linux systems have a `SCHED_BATCH` scheduler priority that is useful for threads like loadblk. You can find the full details at [sched(7)](http://man7.org/linux/man-pages/man7/sched.7.html), but I'll quote the relevant part of the man page below:
> ...this policy will cause the scheduler to always assume that the thread is
CPU-intensive. Consequently, the scheduler will apply a small scheduling penalty
with respect to wakeup behavior, so that this thread is mildly disfavored in
scheduling decisions.
>
> This policy is useful for workloads that are noninteractive, but do not want to
lower their nice value, and for workloads that want a deterministic scheduling
policy without interactivity causing extra preemptions (between the workload's
tasks).
I think this change is useful independently of #10271 and irrespective of whether that change is merged. Under normal operation the loadblk thread will just import `mempool.dat`. However, if Bitcoin is started with `-reindex` or `-reindex-chainstate` this thread will use a great deal of CPU while it rebuilds the chainstate database (and the block database in the case of `-reindex`). By setting `SCHED_BATCH` this thread is less likely to interfere with interactive tasks (e.g. the user's web browser, text editor, etc.).
I'm leaving the nice value unchanged (which also affects scheduling decisions) because I think that's better set by the user. Likewise I'm not using [ioprio_set(2)](http://man7.org/linux/man-pages/man2/ioprio_set.2.html) because it can cause the thread to become completely I/O starved (and knowledgeable users can use `ionice(1)` anyway).
Tree-SHA512: ea8f7d3921ed5708948809da771345cdc33efd7ba3323e9dfec07a25bc21e8612e2676f9c178e2710c7bc437e8c9cafc5e0463613688fea5699b6e8e2fec6cff
fafcad3 doc: Add testmempoolaccept to release-notes (MarcoFalke)
Pull request description:
Some fixups for #11742:
* Add release notes for the new rpc
* Fix a typo in the original pull
* Make the mempool reference passed to `CheckInputsFromMempoolAndCache` const, since that function is called before we return from ATMP and we must not modify the mempool.
Tree-SHA512: 72c459ba69f7698a69c91d2592f10f7fb1864846c7d8c525050d48286f92ba5ec5fe554c54235b52fbd9a8f00226c526ad84584641ec39084e1a1310a261510d
Most logs should terminated with a '\n'. Some logs
are built up over multiple calls to logPrintf(), so
do not need a newline terminater. Comment all of
these 'continued' logs as a linter hing.
f63bc5e wallet: Initialize m_last_block_processed to nullptr. Initialize fields where defined. (practicalswift)
Pull request description:
Initialize `m_last_block_processed` to `nullptr`.
`m_last_block_processed` was introduced in 5ee3172636.
Tree-SHA512: 6e4a807e5b02115cbd80460761056f2eb22043203212d88dd0cd44c28dc0abce30ab29b078ca2c612232e76af4886f4fdbf2b0ff75e2df19b4d1a801b236cc13
Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
9960137 Add developer notes about blocking GUI code (Russell Yanofsky)
9a61eed Use WalletBalances struct in Qt (Russell Yanofsky)
56f33ca Remove direct bitcoin calls from qt/sendcoinsdialog.cpp (Russell Yanofsky)
e872c93 Remove direct bitcoin access from qt/guiutil.cpp (Russell Yanofsky)
5884558 Remove direct bitcoin calls from qt transaction table files (Russell Yanofsky)
3cab2ce Remove direct bitcoin calls from qt/paymentserver.cpp (Russell Yanofsky)
3ec2ebc Remove direct bitcoin calls from qt/addresstablemodel.cpp (Russell Yanofsky)
827de03 Remove direct bitcoin calls from qt/coincontroldialog.cpp (Russell Yanofsky)
a0704a8 Remove most direct bitcoin calls from qt/walletmodel.cpp (Russell Yanofsky)
90d4640 Remove direct bitcoin calls from qt/optionsdialog.cpp (Russell Yanofsky)
582daf6 Remove direct bitcoin calls from qt/rpcconsole.cpp (Russell Yanofsky)
3034a46 Remove direct bitcoin calls from qt/bantablemodel.cpp (Russell Yanofsky)
e0b66a3 Remove direct bitcoin calls from qt/peertablemodel.cpp (Russell Yanofsky)
d7c2c95 Remove direct bitcoin calls from qt/intro.cpp (Russell Yanofsky)
fe6f27e Remove direct bitcoin calls from qt/clientmodel.cpp (Russell Yanofsky)
5fba3af Remove direct bitcoin calls from qt/splashscreen.cpp (Russell Yanofsky)
c2f672f Remove direct bitcoin calls from qt/utilitydialog.cpp (Russell Yanofsky)
3d619e9 Remove direct bitcoin calls from qt/bitcoingui.cpp (Russell Yanofsky)
c0f2756 Remove direct bitcoin calls from qt/optionsmodel.cpp (Russell Yanofsky)
71e0d90 Remove direct bitcoin calls from qt/bitcoin.cpp (Russell Yanofsky)
ea73b84 Add src/interface/README.md (Russell Yanofsky)
Pull request description:
This is a refactoring PR that does not change behavior in any way. This change:
1. Creates abstract [`Node`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/node.h) and [`Wallet`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/wallet.h) interfaces in [`src/interface/`](https://github.com/ryanofsky/bitcoin/tree/pr/ipc-local/src/interface)
1. Updates Qt code to call the new interfaces. This largely consists of diffs of the form:
```diff
- InitLogging();
- InitParameterInteraction();
+ node.initLogging();
+ node.initParameterInteraction();
```
This change allows followup PR #10102 (makes `bitcoin-qt` control `bitcoind` over an IPC socket) to work without any significant updates to Qt code. Additionally:
* It provides a single place to describe the interface between GUI and daemon code.
* It can make better GUI testing possible, because Node and Wallet objects have virtual methods that can be overloaded for mocking.
* It can be used to help make the GUI more responsive (see https://github.com/bitcoin/bitcoin/issues/10504)
Other notes:
* I used python scripts [hide-globals.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/hide-globals.py) and [replace-syms.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/replace-syms.py) to identify all the places where Qt code was accessing libbitcoin global variables and calling functions accessing those global variables.
* These changes were originally part of #10102. Thanks to @JeremyRubin for the suggestion of splitting them out.
Commits:
- [`ea73b84d2d` Add src/interface/README.md](ea73b84d2d)
- [`71e0d90876` Remove direct bitcoin calls from qt/bitcoin.cpp](71e0d90876)
- [`c0f2756be5` Remove direct bitcoin calls from qt/optionsmodel.cpp](c0f2756be5)
- [`3d619e9d36` Remove direct bitcoin calls from qt/bitcoingui.cpp](3d619e9d36)
- [`c2f672fb19` Remove direct bitcoin calls from qt/utilitydialog.cpp](c2f672fb19)
- [`5fba3af21e` Remove direct bitcoin calls from qt/splashscreen.cpp](5fba3af21e)
- [`fe6f27e6ea` Remove direct bitcoin calls from qt/clientmodel.cpp](fe6f27e6ea)
- [`d7c2c95948` Remove direct bitcoin calls from qt/intro.cpp](d7c2c95948)
- [`e0b66a3b7c` Remove direct bitcoin calls from qt/peertablemodel.cpp](e0b66a3b7c)
- [`3034a462a5` Remove direct bitcoin calls from qt/bantablemodel.cpp](3034a462a5)
- [`582daf6d22` Remove direct bitcoin calls from qt/rpcconsole.cpp](582daf6d22)
- [`90d4640b7e` Remove direct bitcoin calls from qt/optionsdialog.cpp](90d4640b7e)
- [`a0704a8996` Remove most direct bitcoin calls from qt/walletmodel.cpp](a0704a8996)
- [`827de038ab` Remove direct bitcoin calls from qt/coincontroldialog.cpp](827de038ab)
- [`3ec2ebcd9b` Remove direct bitcoin calls from qt/addresstablemodel.cpp](3ec2ebcd9b)
- [`3cab2ce5f9` Remove direct bitcoin calls from qt/paymentserver.cpp](3cab2ce5f9)
- [`58845587e1` Remove direct bitcoin calls from qt transaction table files](58845587e1)
- [`e872c93ee8` Remove direct bitcoin access from qt/guiutil.cpp](e872c93ee8)
- [`56f33ca349` Remove direct bitcoin calls from qt/sendcoinsdialog.cpp](56f33ca349)
- [`9a61eed1fc` Use WalletBalances struct in Qt](9a61eed1fc)
- [`9960137697` Add developer notes about blocking GUI code](9960137697)
Tree-SHA512: 7b9eff2f37d4ea21972d7cc6a3dbe144248595d6c330524396d867f3cd2841d666cdc040fd3605af559dab51b075812402f61d628d16cf13719335c1d8bf8ed3
