87fe292d89 doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226 net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
13c3a659c0 Qt/Bugfix: fix handling default wallet with no name (João Barbosa)
Pull request description:
If one loads a wallet via RPC (`loadwallet w2`), then select w2, select back to the default wallet (which is an empty string), that default wallet cannot be access through the RPC console because the current code only points to the wallet endpoint if the wallet name is not empty.
This is a quick fix that reenables accessing the default wallet in case an additional wallet has been loaded.
Using "" for the default wallet may not be ideal in other cases and it may make more sense to change it at a deeper level (wallet.cpp). See discussion here which where the reasons for the current behaviour in master:
https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-370862718
@jnewbery @promag @ryanofsky
Tree-SHA512: 74b935886b4e4a6033a2f5e1f44bb69a252e31f4021e19a2054445a8e3e4db1d8ee256290850a84d8569d2d0e21412fce0170e7f0e881259156057587181ee05
c004ffc9b4 Make handling of invalid in IsMine more uniform (Pieter Wuille)
a53f0feff8 Add some checks for invalid recursion in IsMine (Pieter Wuille)
b5802a9f5f Simplify IsMine logic (Pieter Wuille)
4e91820531 Make IsMine stop distinguishing solvable/unsolvable (Pieter Wuille)
6d714c3419 Make coincontrol use IsSolvable to determine solvability (Pieter Wuille)
Pull request description:
Our current `IsMine` logic does several things with outputs:
* Determine "spendability" (roughly corresponding to "could we sign for this")
* Determine "watching" (is this an output directly or indirectly a watched script)
* Determine invalidity (is this output definitely not legally spendable, detecting accidental uncompressed pubkeys in witnesses)
* Determine "solvability" (would we be able to sign for this ignoring the fact that we may be missing some private keys).
The last item (solvability) is mostly unrelated and only rarely needed (there is just one instance, inside the wallet's coin control logic). This PR changes that instance to use the separate `IsSolvable` function, and stop `IsMine` from distinguishing between solvable and unsolvable.
As an extra, this also simplifies the `IsMine` logic and adds some extra checks (which wouldn't be hit unless someone adds already invalid scripts to their wallet).
Tree-SHA512: 95a6ef75fbf2eedc5ed938c48a8e5d77dcf09c933372acdd0333129fb7301994a78498f9aacce2c8db74275e19260549dd67a83738e187d40b5090cc04f33adf
2885c131b6 Qt: use [default wallet] as name for wallet with no name (Jonas Schnelli)
Pull request description:
Loading a wallet from a state where only the default wallet was active results in using an empty string for the initial/default wallet name.
This is a GUI only quick-fix that overrides wallet(s) with name "" to "[default wallet]". Does not affect `getwalletinfo` or `listwallets`.
Also, unsure if it should be fixed at a deeper level and if – instead of [default wallet] – it should use `wallet.dat` (the filename of the default wallet).
Tree-SHA512: 1d50dbb200b23df5ac53ce15aeb6453af4da354d6e6e53fe33ff075b477493254d6028b6d3569a7804b1aa616cb9a988a53de818937e37cdcb19cb70a90e2a88
fa9da85b7c qa: Initialize lockstack to prevent null pointer deref (MarcoFalke)
Pull request description:
It is currently impossible to call debug methods such as `AssertLock(Not)Held` on a thread without running into undefined behavior, unless a lock was pushed on the stack in this thread.
Initializing the global `lockstack` seems to fix both issues.
Tree-SHA512: 8cb76b22cb31887ddf15742fdc790f01e8f04ed837367d0fd4996535748d124342e8bfde68952b903847b96ad33406c64907a53ebab9646f78d97fa4365c3061
9e305b56f5 build: split warnings out of CXXFLAGS (Cory Fields)
Pull request description:
CXXFLAGS should not be modified anyway. Also, this will enable us to selectively disable warnings.
As discussed with @sipa on IRC. Intention is to be able to filter out warnings from leveldb code so that we can be more aggressive with what we enable.
Tree-SHA512: 1bf686250f7a59c0aff04371f87c5db4e8f5bde604c6ab75e568326fb6d7733f26b113fa52dc1c836fa10baa76770d479a0e5f82a4a1905947dd7f245e0560f4
Add a `createwallet` RPC to allow wallets to be created dynamically at
runtime. This functionality is currently only available through RPC and
newly created wallets will not be displayed in the GUI.
5f3cbde9de Increased max width of amount field to prevent number overflow bug. (Brandon Ruggles)
Pull request description:
Fixes#13231.
I was able to reproduce this bug within my own Fedora 27 VM. Following @jonasschnelli's advice, I first tried to change `setAlignment(Qt::AlignRight);` to `setAlignment(Qt::AlignLeft);`, however, I realized that this wouldn't fix the underlying overflow problem, as it would only make it easier to see the most significant digits under certain scenarios. The reason for the overflow is that Fedora uses plus and minus buttons on the Qt spin box class, rather than up and down arrows, which is what happens on **most** other operating systems. These plus and minus buttons take up more width, and therefore provide less space for text.
The solution I went with was the second suggestion by @jonasschnelli, which was to just increase the maximum width of the amount box. After some experimentation, 240 seemed to be the smallest max width that would allow as many digits as one would want in the amount box without overflow, even with the plus and minus buttons in Fedora.
Please let me know if there are any issues with this PR and I will work to fix them. Thank you!
Tree-SHA512: 155f34cec74af46ec1fe723a5241798d8e15607a4e1cdc493014dcc0ae9818a001c7901831168b5f26a6953ec5a992e4a67c57db1ad377bcf10f12941688ee93
97c112d4ca Declare TorReply parsing functions in torcontrol_tests (Ben Woosley)
Pull request description:
These methods are standalone string parsing methods which were included
into test via an include of torcontrol.cpp, which is bad practice.
~~Splitting them out reveals that they were the only torcontrol.cpp
methods under test, so the test file is renamed tor_reply_tests.cpp.~~
Introduced in #10408
Tree-SHA512: 8ff11a9c900a88f910a73dfe16f43581a567e9d60e9298a8a963fc9dd7cffb4d97a644da677610aafb7d89f1dd1cede9afeae2c6344305e021a9a322dbcea0ac
c865ee1e73 Fix FreeBSD build by including utilstrencodings.h (Wladimir J. van der Laan)
Pull request description:
`random.cpp` needs to explicitly include `utilstrencodings.h` to get `ARRAYLEN`. This fixes the FreeBSD build.
This was broken in 84f41946b9 (#13236).
Tree-SHA512: bdc2a28411ae217e40697c0315ef5a37cc2f5b6bc7bbde16684fb7343d1c1c620d67777a88e609a2190115edb08b823cfb5d31ed16356a7cb0d00c3b6f877c0e
80b4910f7d wallet: Use shared pointer to retain wallet instance (João Barbosa)
Pull request description:
Currently there are 3 places where it makes sense to retain a wallet shared pointer:
- `vpwallets`;
- `interfaces::Wallet` interface instance - used by the UI;
- wallet RPC functions - given by `GetWalletForJSONRPCRequest`.
The way it is now it is possible to have, for instance, listunspent RPC and in parallel unload the wallet (once #13111 is merged) without blocking. Once the RPC finishes, the shared pointer will release the wallet.
It is also possible to get all existing wallets without blocking because the caller keeps a local list of shared pointers.
This is mostly relevant for wallet unloading.
This PR replaces #11402.
Tree-SHA512: b7e37c7e1ab56626085afe2d40b1628e8d4f0dbda08df01b7e618ecd2d894ce9b83d4219443f444ba889096286eff002f163cb0a48f37063b62e9ba4ccfa6cce
0bf431870e net: Serve blocks directly from disk when possible (Wladimir J. van der Laan)
Pull request description:
In `ProcessGetBlockData`, send the block data directly from disk if type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the on-disk format matches the network format.
This is expected to increase performance because a deserialization and subsequent serialization roundtrip is avoided.
Tree-SHA512: 9a9500b4c1354eaae1a6f1c6ef2416c1c1985029852589266f3a70e808f6c7482c135e9ab251a527566935378ab7c32dba4ed43ba5451e802d8e72b77d1ba472
fac1223a56 Cache witness hash in CTransaction (MarcoFalke)
faab55fbb1 Make CMutableTransaction constructor explicit (MarcoFalke)
Pull request description:
This speeds up:
* compactblocks (v2)
* ATMP
* validation and miner (via `BlockWitnessMerkleRoot`)
* sigcache (see also unrelated #13204)
* rpc and rest (nice, but irrelevant)
This presumably slows down rescan, which uses a `CTransaction` and its `GetHash`, but never uses the `GetWitnessHash`. The slow down is proportional to the number of witness transactions in the rescan window. I.e. early in the chain there should be no measurable slow down. Later in the chain, there should be a slow down, but acceptable given the speedups in the modules mentioned above.
Tree-SHA512: 443e86acfcceb5af2163e68840c581d44159af3fd1fce266cab3504b29fcd74c50812b69a00d41582e7e1c5ea292f420ce5e892cdfab691da9c24ed1c44536c7
41d0476f62 Tests: Add data file (Anthony Towns)
4cbfb6aad9 Tests: Test new getblockstats RPC (Jorge Timón)
35e77a0288 RPC: Introduce getblockstats (Jorge Timón)
cda8e36f01 Refactor: RPC: Separate GetBlockChecked() from getblock() (Jorge Timón)
Pull request description:
It returns per block statistics about several things. It should be easy to add more if people think of other things to add or remove some if I went too far (but once written, why not keep it? EDIT: answer: not to test or maintain them).
The currently available options are: minfee,maxfee,totalfee,minfeerate,maxfeerate,avgfee,avgfeerate,txs,ins,outs (EDIT: see updated list in the rpc call documentation)
For the x axis, one can use height or block.nTime (I guess I could add mediantime if there's interest [EDIT: nobody showed interest but I implemented mediantime nonetheless, in fact there's no distinction between x or y axis anymore, that's for the caller to judge]).
To calculate fees, -txindex is required.
Tree-SHA512: 2b2787a3c7dc4a11df1fce62c8a4c748f5347d7f7104205d5f0962ffec1e0370c825b49fd4d58ce8ce86bf39d8453f698bcd46206eea505f077541ca7d59b18c
60ebc7da4c trivial: Mark overrides as such. (Daniel Kraft)
Pull request description:
This trivial change adds the `override` keyword to some methods that override virtual base class / interface methods. This ensures that any future changes to the interface's method signatures which are not correctly mirrored in the subclasses will break at compile time with a clear error message, rather than at runtime.
Tree-SHA512: cc1bfa5f03b5e29d20e3eab07b0b5fa2f77b47f79e08263dbff43e4f463e9dd8f4f537e2c8c9b6cb3663220dcf40cfd77723cd9fcbd623c9efc90a4cd44facfc
This removes the need to include rpc/blockchain.cpp in order to put
GetDifficulty under test. GetDifficulty was called in two ways:
* with a guaranteed non-null blockindex
* with no argument
Change the latter case to be provided chainActive.Tip() explicitly.
This trivial change adds the "override" keyword to some methods of
subclasses meant to override interface methods. This ensures that any
future change to the interface' method signatures which are not correctly
mirrored in the subclass will break at compile time with a clear error message,
rather than fail at runtime (which is harder to debug).
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the method.
In most cases, this input is already immediately available and need not be
looked up.
9aac9f90d5 replace modulus with FastMod (Martin Ankerl)
Pull request description:
Not sure if this is optimization is necessary, but anyway I have some spare time so here it is. This replaces the slow modulo operation with a much faster 64bit multiplication & shift. This works when the hash is uniformly distributed between 0 and 2^32-1. This speeds up the benchmark by a factor of about 1.3:
```
RollingBloom, 5, 1500000, 3.73733, 4.97569e-07, 4.99002e-07, 4.98372e-07 # before
RollingBloom, 5, 1500000, 2.86842, 3.81630e-07, 3.83730e-07, 3.82473e-07 # FastMod
```
Be aware that this changes the internal data of the filter, so this should probably
not be used for CBloomFilter because of interoperability problems.
Tree-SHA512: 04104f3fb09f56c9d14458a6aad919aeb0a5af944e8ee6a31f00e93c753e22004648c1cd65bf36752b6addec528d19fb665c27b955ce1666a85a928e17afa47a
b0d2ca9fb6 wallet: Exit SyncMetaData if there are no transactions to sync (Wladimir J. van der Laan)
Pull request description:
Instead of crash with an assertion error, simply exit the function `SyncMetaData` if there is no metadata to sync.
Fixes#13110.
Tree-SHA512: 44c4789497b5b63963bef66d8b695987dde80764199f6ea0f2c974be19d29c2663f32446a663a2ee9029e143e5d1d9e8a591e52e6e7e795b982782626bec25bb
c722f00a7 [qt] Added satoshi unit "Satoshi (sat)" will be displayed in dropdowns and status bars. "sat" will be used when appended to numbers. (GreatSock)
4ddbcbf8c [qt] BitcoinUnits::format with zero decimals Formatting with zero decimals will now result in 123 instead of 123.0 (GreatSock)
Pull request description:
This adds satoshi as an additional amount unit for the GUI.
Tree-SHA512: c166c96c9a434b6ac700e1628e54f2dbb132c5232d949c0b464f61276a91d56f9bab4a62d50780535f1d34eaac6484f693a1e0611cd7c9d1ed5ebee066c0dd08
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
cd53981 [docs] Add release notes for `loadwallet` RPC. (John Newbery)
a46aeb6 [wallet] [tests] Test loadwallet (John Newbery)
5d15260 [wallet] [rpc] Add loadwallet RPC (John Newbery)
876eb64 [wallet] Pass error message back from CWallet::Verify() (John Newbery)
e0e90db [wallet] Add CWallet::Verify function (John Newbery)
470316c [wallet] setup wallet background flushing in WalletInit directly (John Newbery)
59b87a2 [wallet] Fix potential memory leak in CreateWalletFromFile (John Newbery)
Pull request description:
Adds a `loadwallet` RPCs. This allows wallets to be loaded dynamically during runtime without having to stop-start the node with new `-wallet` params.
Includes functional tests and release notes.
Limitations:
- currently this functionality is only available through the RPC interface.
- wallets loaded in this way will not be displayed in the GUI.
Tree-SHA512: f80dfe32b77f5c97ea3732ac538de7d6ed7e7cd0413c2ec91096bb652ad9bccf05d847ddbe81e7cd3cd44eb8030a51a5f00083871228b1b9b0b8398994f6f9f1
dd435ad Add unit tests for signals generated by ProcessNewBlock() (Jesse Cohen)
a3ae8e6 Fix concurrency-related bugs in ActivateBestChain (Jesse Cohen)
ecc3c4a Do not unlock cs_main in ABC unless we've actually made progress. (Matt Corallo)
Pull request description:
Originally this PR was just to add tests around concurrency in block validation - those tests seem to have uncovered another bug in ActivateBestChain - this now fixes that bug and adds tests.
ActivateBestChain (invoked after a new block is validated) proceeds in steps - acquiring and releasing cs_main while incrementally disconnecting and connecting blocks to sync to the most work chain known (FindMostWorkChain()). Every time cs_main is released the result of FindMostWorkChain() can change - but currently that value is cached across acquisitions of cs_main and only refreshed when an invalid chain is explored. It needs to be refreshed every time cs_main is reacquired. The test added in 6094ce7304 will occasionally fail without the commit fixing this issue 26bfdbaddb
Original description below
--
After a bug discovered where UpdatedBlockTip() notifications could be triggered out of order (#12978), these unit tests check certain invariants about these signals.
The scheduler test asserts that a SingleThreadedSchedulerClient processes callbacks fully and sequentially.
The block validation test generates a random chain and calls ProcessNewBlock from multiple threads at random and in parallel. ValidationInterface callbacks verify that the ordering of BlockConnected BlockDisconnected and UpdatedBlockTip events occur as expected.
Tree-SHA512: 4102423a03d2ea28580c7a70add8a6bdb22ef9e33b107c3aadef80d5af02644cdfaae516c44933924717599c81701e0b96fbf9cf38696e9e41372401a5ee1f3c
The new `loadwallet` RPC method allows an existing wallet to be loaded
dynamically at runtime.
`unloadwallet` and `createwallet` are not implemented. Notably,
`loadwallet` can only be used to load existing wallets, not to create a
new wallet.
Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
After a recent bug discovered in callback ordering in MainSignals,
this test checks invariants in ordering of
BlockConnected / BlockDisconnected / UpdatedChainTip signals
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
60f61f9 Tighten up bech32::Decode(); add tests. (murrayn)
Pull request description:
Just a few minor optimizations to bech32::Decode():
1) optimize the order and logic of the conditionals
2) get rid of subsequent '(c < 33 || c > 126)' check which is redundant (already performed above)
3) add a couple more bech32 tests (mixed-case)
Tree-SHA512: e41af834c8f6b7d34c22c28b724df42c60f72e00df616e70a12efbc4271d15d80627fe1bc36845caf29f615c238499a566298a863cbe119fef457287231053c8
In `ProcessGetBlockData`, send the block data directly from disk if
type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the
on-disk format matches the network format.
This is expected to increase performance because a deserialization and
subsequent serialization roundtrip is avoided.
chain.h does not actually depend on the methods defined in pow.h, just its
include of consensus/params.h, which is standalone and can be included instead.
Confirmed by inspection and successful build.
f08a385590 [qt]: changes sendcoinsdialog's box layout for improved readability. (marcoagner)
Pull request description:
I'm addressing two (probably duplicate) issues: https://github.com/bitcoin/bitcoin/issues/11606 and https://github.com/bitcoin/bitcoin/issues/10613.
Some points worth noting:
- I've tried to balance the proposed changes on both issues without going too far and remaining a bit conservative. It will be easier to improve based on suggestions where necessary.
- I preferred to maintain a layout that doesn't ask for an address truncation because, in my view, this wallet should be conservative on this.
- I didn't follow the idea of aligning the amounts to the right for finding it more natural (and minimalist) to read the information without having to map alignments. Additionally, that approach seems to need more `<hr />`'s (or similar) in order to help the user to map information, which ended up cluttering the box too much (specially with multiple recipients). Thus, I preferred to just give some more space between recipients. Let me know if there are better ideas on this.
Visually, I went from this (current):
To this:
As a side note, while doing this, I thought about a better way to show fees and found there's already a PR on this (https://github.com/bitcoin/bitcoin/pull/12189) and thought it is
Tree-SHA512: e94b740fab6c1babd853a97be65c3b6f86ec174c975a926fde66b147f7a47e0cf0fa10f7255ba92aaba68c76a80dde8c688008179a34705a9799bf24d3c5cd46
159c32d1f1 Add assertion to guide static analyzers. Clang Static Analyzer needs this guidance. (practicalswift)
fd447a6efe Fix dead stores. Values were stored but never read. Limit scope. (practicalswift)
Pull request description:
Fix Clang Static Analyzer warnings reported by @kallewoof in #12961:
* Fix dead stores. Values were stored but never read.
* Add assertion to guide static analyzers. See #12961 for details.
Tree-SHA512: 83dbec821f45217637316bee978e7543f2d2caeb7f7b0b3aec107fede0fff8baa756da8f6b761ae0d38537740839ac9752f6689109c38a4b05c0c041aaa3a1fb
2352aa9 test: Ensure that recursive -includeconf produces appropriate warnings (Karl-Johan Alm)
c5bcc7d util: warn about recursive -includeconf arguments in configuration files (Karl-Johan Alm)
Pull request description:
This is a follow-up PR to #10267, and addresses https://github.com/bitcoin/bitcoin/pull/10267#issuecomment-387546144.
~~I am adding extra work for @jnewbery in #12755 here -- maybe I should just rebase on top of that, but not sure what the appropriate approach is here.~~
Tree-SHA512: 87f0c32436b70424e33616ffb88d7cb699f90d6a583a10237e224b28fc936d6a9df95536c8c52ee8546b3942da92b2a357e61bf87e00d1462bc10d46d3bee352
9e49db2 Make --enable-debug to pick better options (Evan Klitzke)
Pull request description:
Cherry-picked (and rebased) 94189645e67f364c4445d62e2b00c282d885cbbf from the "up for grabs" PR: "[build] Make --enable-debug pick better options" (#12695).
See previous review in #12695.
Tree-SHA512: a93cdadcf13e2ef8519acb1ce4f41ce95057a388347bb0a86a5c164dc7d0b0d14d4bb2a466082d5a100b8d50de65c605c40abaed555e8ea77c99e28800a34439
66b0b1b2a6 Add compile time checking for all cs_wallet runtime locking assertions (practicalswift)
Pull request description:
Add compile time checking for `cs_wallet` runtime locking assertions.
This PR is a subset of #12665. The PR was broken up to make reviewing easier.
The intention is that literally all `EXCLUSIVE_LOCKS_REQUIRED`/`LOCKS_EXCLUDED`:s added in this PR should follow either directly or indirectly from `AssertLockHeld(…)`/`AssertLockNotHeld(…)`:s already existing in the repo.
Consider the case where function `A(…)` contains `AssertLockHeld(cs_foo)` (without
first locking `cs_foo` in `A`), and that `B(…)` calls `A(…)` (without first locking `cs_main`):
* It _directly_ follows that: `A(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
* It _indirectly_ follows that: `B(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
Tree-SHA512: d561d89e98a823922107e56dbd493f0f82e22edac91e51e6422f17daf2b446a70c143b7b157ca618fadd33d0ec63eb7a57dde5a83bfdf1fc19d71459b43e21fd
b6f0b4d wallet: Improve logging when BerkeleyDB environment fails to close (Tim Ruffing)
264c643 wallet: Reset BerkeleyDB handle after connection fails (Tim Ruffing)
Pull request description:
According to the BerkeleyDB docs, the DbEnv handle may not be accessed
after close() has been called. This change ensures that we create a new
handle after close() is called. This avoids a segfault when the first
connection attempt fails and then a second connection attempt tries to
call open() on the already closed DbEnv handle.
Without the patch, bitcoindd reliably crashes in the second call to `set_lg_dir()` after `close()` if
there is an issue with the database:
```
2018-05-03T13:27:21Z Bitcoin Core version v0.16.99.0-a024a1841-dirty (debug build)
[...]
2018-05-03T13:27:21Z Using wallet directory /home/tim/.bitcoin
2018-05-03T13:27:21Z init message: Verifying wallet(s)...
2018-05-03T13:27:21Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T13:27:21Z Using wallet wallet.dat
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T13:27:21Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525354041.bak. Retrying.
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
[1] 14533 segmentation fault (core dumped) ./src/bitcoind
```
After the fix:
```
2018-05-03T17:19:32Z Bitcoin Core version v0.16.99.0-cc09e3bd0-dirty (release build)
[...]
2018-05-03T17:19:32Z Using wallet directory /home/tim/.bitcoin
2018-05-03T17:19:32Z init message: Verifying wallet(s)...
2018-05-03T17:19:32Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T17:19:32Z Using wallet wallet.dat
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z scheduler thread start
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T17:19:32Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525367972.bak. Retrying.
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z Cache configuration:
2018-05-03T17:19:32Z * Using 2.0MiB for block index database
2018-05-03T17:19:32Z * Using 8.0MiB for chain state database
2018-05-03T17:19:32Z * Using 440.0MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space)
2018-05-03T17:19:32Z init message: Loading block index..
[...]
```
Tree-SHA512: b809b318e5014ec47d023dc3dc40826b9706bfb211fa08bc2d29f36971b96caa10ad48d9a3f96c03933be46fa4ff7e00e952ac77bfffb6563767fb08aa4f23d6
a8da482 Bump wallet version for pre split keypool (Andrew Chow)
dfcd9f3 Use a keypool of presplit keys after upgrading to hd chain split (Andrew Chow)
5c50e93 Allow -upgradewallet to upgradewallets to HD (Andrew Chow)
2bcf2b5 Test sethdseed (Andrew Chow)
b5ba01a Add 'sethdseed' RPC to initialize or replace HD seed (Chris Moore)
dd3c07a Separate HaveKey function that checks whether a key is in a keystore (Andrew Chow)
Pull request description:
Revival/rebase of #11085
Adds a new command `sethdseed` which allows you to either set or generate a new HD seed to be used. A new keypool can be generated or the original one kept and new keys added to the keypool will come from the new HD seed.
Wallets that are not HD will be upgraded to be version FEATURE_HD_SPLIT when the `sethdseed` RPC command is used.
I have also add some tests for this.
Additionally `-upgradewallet` can now be used to upgrade a wallet from non-HD to HD. When it is used for such an upgrade, the keypool will be regenerated.
Tree-SHA512: e56c792e150590429ac4a1061e8d6f7b20cca06366e184eb9bbade4cd6ae82699a28fe84f87031eadba97ad2c1606517a105f00fb7b45779c979243020071adb
This commit adds a boolean option `-enablebip61`, defaulting to `1`, that
can be used to disable the sending of BIP61 `reject` messages. This
functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be
used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts
against upstream bandwidth. Also the reject messages tend to be larger
than the message that was rejected.
On the other hand, reject messages can be useful while developing client
software (I found them indispensable while creating bitcoin-submittx),
as well as for our own test cases, so whatever the default becomes on the
long run, IMO the functionality should be retained as option. But that's
a discussion for later.
11fa6bb66e Bugfix: ensure consistency of m_failed_blocks after reconsiderblock (Suhas Daftuar)
Pull request description:
This was introduced in 015a5258ad and could cause a node to crash (due to assertion failure) when using the `reconsiderblock` rpc.
Tree-SHA512: 820dcd761bf983e36f5d0f16777ed75c833daaf62a6b3a4dbd17f6caaf9287223e3a202d06540ac62f8ba72926b73b0873bb76c6273ddcb19d9408f4c1cd325e
Bump the wallet version to indicate support for the pre split keypool.
Also prevents any wallets from upgrading to versions between HD_SPLIT
and PRE_SPLIT_KEYPOOL.
After upgrading to HD chain split, we want to continue to use keys
from the old keypool. To do this, before we generate any new keys after
upgrading, we mark all of the keypool entries as being pre-chain
split and move them to a separate pre chain split keypool. Keys are
fetched from that keypool until it is emptied. Only then are the new
internal and external keypools used.
Changes the maximum upgradewallet version to the latest wallet version
number, 159900. Non-HD wallets will be upgraded to use HD derivation.
Non HD chain split wallets will be upgraded to HD chain split.
If a non-HD wallet is upgraded to HD, the keypool will be entirely
regenerated.
Since upgradewallet is effectively run during a first run, all of the
first run initial setup stuff is combined with the upgrade to HD
If multiple threads are invoking ActivateBestChain, it was possible to have
them working towards different tips, and we could arrive at a less work tip
than we should. Fix this by introducing a ChainState lock which must
be held for the entire duration of ActivateBestChain to enforce
exclusion in ABC.
Technically, some internal datastructures may be in an inconsistent
state if we do this, though there are no known bugs there. Still,
for future safety, its much better to only unlock cs_main if we've
made progress (not just tried a reorg which may make progress).
364bae5 qa: Pad scriptPubKeys to get minimum sized txs (MarcoFalke)
7485488 Policy to reject extremely small transactions (Johnson Lau)
0f8719b Add transaction tests for constant scriptCode (Johnson Lau)
9dabfe4 Add constant scriptCode policy in non-segwit scripts (Johnson Lau)
Pull request description:
This disables `OP_CODESEPARATOR` in non-segwit scripts (even in an unexecuted branch), and makes a positive `FindAndDelete` result invalid. This ensures that the `scriptCode` serialized in `SignatureHash` is always the same as the script passing to the `EvalScript`.
Tree-SHA512: a0552cb920294d130251c48053fa2ff1fbdd26332e62b52147d918837852750f0ce35ce2cd1cbdb86588943312f8154ccb4925e850dbb7c2254bc353070cd5f8
a2f678d Bugfix: the end of a reorged chain is invalid when connect fails (Pieter Wuille)
Pull request description:
Introduced in 4e0eed88ac
When an invalid block is found during a reorg, we know the last of the blocks in the was-to-be-connected chain is invalid, but not necessarily the first. As `vpIndexToConnect` is ordered in decreasing height, the end of the reorg is the front of the vector, and not the back.
This only affected the warning system.
Tree-SHA512: ddf749f8a78083811a5a17152723f545c1463768d09dc9832ec3682e803a3c106fb768de9fa91c03aa95e644d4e41361a7e4ee791940fd7d51cdefea90de31fc
25b7ab9 doc: Add release notes for -includeconf (Karl-Johan Alm)
0f0badd test: Test includeconf parameter. (Karl-Johan Alm)
629ff8c -includeconf=<path> support in config handler, for including external configuration files (Karl-Johan Alm)
Pull request description:
Fixes: #10071.
Done:
- adds `-includeconf=<path>`, where `<path>` is relative to `datadir` or to the path of the file being read, if in a file
- protects against circular includes
- updates help docs
~~~Thoughts:~~~
- ~~~I am not sure how to test this in a neat manner. Feedback on this would be nice. Will dig/think though.~~~
Tree-SHA512: cb31f1b2f69fbc0890d264948eb2e501ac05cf12f5e06a5942f9c1539eb15ea8dc3cae817f4073aecb2fcc21d0386747f14f89d990772003a76e2a6d25642553
Introduced in 4e0eed88ac
When an invalid block is found during a reorg, we know the last of the blocks in
the was-to-be-connected chain is invalid, but not necessarily the first. As
vpIndexToConnect is ordered in decreasing height, the end of the reorg is the
front of the vector, and not the back.
This only affected the warning system.
16be13345 Fix rescanblockchain rpc to property report progress (Ben Woosley)
Pull request description:
Previously it assumed tip in all cases. This also extracts a RescanVerificationProgress helper object whose role is to manage reporting, in order to simplify ScanForWalletTransactions - more lines in total, but much simpler to follow the core logic.
Tree-SHA512: 5ebed0c56fae4ccfe613ff1d7082cb6da5a86635a8993ed3af70b500a4ea43074121aea9219b2f0321fbfeb7efcb964bdc2199297a64ca0fa85d9d07aa637d40
ddebde7 Add Windows shutdown handler (Chun Kuan Lee)
Pull request description:
Exit properly when clicked the red X of Windows Console
Tree-SHA512: f030edd08868390662b42abfa1dc6bd702166c6c19f5b1f8e7482e202451e79fb6f37ea672c26c2eb0d32c367bfca86160fbee624696c53828f280b7070be6a0
20ce5af Print a log message if we fail to shrink the debug log file (practicalswift)
29c9bdc Handle unsuccessful fseek(...):s (practicalswift)
Pull request description:
Handle unsuccessful `fseek(...)`:s.
**Note to reviewers:** What is the most appropriate course of actions for each of these unsuccessful `fseek(...)`:s?
Tree-SHA512: 5b3d82dbdd15d434d3f08dcb4df62888da4df8541d2586f56a4e529083005f6782c39e10645acd1ec403da83061bbfd8dbf2dddc66e09268d410ad0918c61876
43f3dec00 Remove enum specifier (to avoid re-declare scoped enum as unscoped) (donaloconnor)
Pull request description:
MSVC fails to compile with the changes made in #10742
The problem is enum types were changed to scoped (`enum class`) but in some places `enum` as an unscoped is used.
This is a very simple fix and I've tested it.
Edit: Had to remove enum altogether - `enum class` doesn't compile on clang.
Tree-SHA512: 13e21666243585a133c74c81249a1fa4098d6b7aa3cda06be871fa017c0ad9bb7b0725f801160b9d31678448d668718197941fd84702ebdef15128c27d92cd70
fad63eb [logging] Don't incorrectly log that REJECT messages are unknown. (John Newbery)
Pull request description:
Reject messages are logged to debug.log if NET debug logging is enabled.
Because of the way the `ProcessMessages()` function is structured,
processing for REJECT messages will also drop through to the default
branch and incorrectly log `Unknown command "reject" from peer-?`. Fix
that by exiting from `ProcessMessages()` early.
without this PR:
```
2018-05-03T17:37:00.930600Z received: reject (21 bytes) peer=0
2018-05-03T17:37:00.930620Z Reject message code 16: spammy spam
2018-05-03T17:37:00.930656Z Unknown command "reject" from peer=0
```
with this PR:
```
2018-05-03T17:35:04.751246Z received: reject (21 bytes) peer=0
2018-05-03T17:35:04.751274Z Reject message code 16: spammy spam
```
Tree-SHA512: 5c84c98433ab99e0db2dd481f9c2db6f87ff0d39022ff317a791737e918714bbcb4a23e81118212ed8e594ebcf098ab7f52f7fd5e21ebc3f07b1efb279b9b30b
Replaces the slow modulo operation with a much faster 32bit multiplication & shift. This works
because the hash should be uniformly distributed between 0 and 2^32-1. This speeds up the benchmark
by a factor of about 1.3:
RollingBloom, 5, 1500000, 3.73733, 4.97569e-07, 4.99002e-07, 4.98372e-07 # before
RollingBloom, 5, 1500000, 2.86842, 3.81630e-07, 3.83730e-07, 3.82473e-07 # FastMod
Be aware that this changes the position of the bits that are toggled, so this should probably
not be used for CBloomFilter which is serialized.
