984d72ec65 Return the script type from Solver (Ben Woosley)
Pull request description:
Because false is synonymous with TX_NONSTANDARD, this conveys the same
information and makes the handling explicitly based on script type,
simplifying each call site.
Prior to this change it was common for the return value to be ignored, or for the
return value and TX_NONSTANDARD to be redundantly handled.
Tree-SHA512: 31864f856b8cb75f4b782d12678070e8b1cfe9665c6f57cfb25e7ac8bcea8a22f9a78d7c8cf0101c841f2a612400666fb91798bffe88de856e98b873703b0965
23f4343781 Add CMerkleTx::IsImmatureCoinBase method (Ben Woosley)
Pull request description:
All but one call to `GetBlocksToMaturity` is testing it relative to 0
for the purposes of determining whether the coinbase tx is immature.
In such case, the value greater than 0 implies that the tx is coinbase,
so there is no need to separately test that status.
This names the concept for easy singular use.
Tree-SHA512: 4470d07404a0707144f9827b9a94c5c4905f23ee6f9248edc5df599a59d28e21ea0201d8abe5d5d73b39cb05b60c861ea8e04767eef04433e2ee95dcfed653ee
std::is_trivially_constructible<T> is equivalent to std::is_trivially_default_constructible<T>
std::has_trivial_default_constructor<T> is the GCC < 5 name for std::is_trivially_default_constructible<T>
std::is_trivial was also used when compiling with clang, due to clang's use of __GNUC__. Test __clang__
to target the intended implementations.
317f2cb3f4 test: Check RPC settxfee errors (João Barbosa)
48618daf26 Add checks for settxfee reasonableness (Anthony Towns)
Pull request description:
When using the `settxfee` RPC, the value is silently ignored if it is less than either than minrelaytxfee or the wallet's mintxfee. This adds an error response if that's going to happen, but still allows "settxfee 0" to deliberately default to the minimum value.
Tree-SHA512: ce685584cf8d6b9ca2cc97196d494220e3892b6a804a458086e04b3a23df281da432ad0a3053106a064c90c541ddb6f6b96a27cf8376d45af1e44449baf88456
321159e53e don't report minversion wallet entry as unknown (Gregory Sanders)
Pull request description:
It is known in WalletBatch::LoadWallet
Tree-SHA512: 82f7e12f48ae7d17317074ce5b5e27c70ba8334b04adbf7cc863f8169cc1aa460b9454571e2698aa00059c8c8f669fe19c0d40c4910dcded260ddca6ce78be9d
faaac5caaa RPCTypeCheck bip32derivs arg in walletcreatefunded (Gregory Sanders)
1f0c4282e9 QA: add basic walletcreatefunded optional arg test (Gregory Sanders)
1f18d7b591 walletcreatefundedpsbt: remove duplicate replaceable arg (Gregory Sanders)
2252ec5008 Allow ConstructTransaction to not throw error with 0-input txn (Gregory Sanders)
Pull request description:
1) Previously an empty input argument transaction that is marked for replaceability fails to pass the `SignalsOptInRBF` check right before funding it. Explicitly check for that condition before throwing an error.
2) The rpc call had two separate `replaceable` arguments, each of which being used in mutually exclusive places. I preserved the `options` version to retain compatability with `fundtransaction`.
Tree-SHA512: 26eb0c9e2d38ea51d11f741d61100223253271a084adadeb7e78c6d4e9004636f089e4273c5bf64a41bd7e9ff795317acf30531cb36aeb0d8db9304b3c8270c3
d795c610d3 [qt] TransactionView: highlight replacement tx after fee bump (Sjors Provoost)
Pull request description:
Consistent with #12421 which highlights the transaction after send.
<img width="747" alt="1" src="https://user-images.githubusercontent.com/10217/38036280-a7358ea4-32a6-11e8-8f92-417e9e1e3e8b.png">
<img width="685" alt="2" src="https://user-images.githubusercontent.com/10217/38036289-aac87040-32a6-11e8-9f94-81745ff6c592.png">
~I'm not too proud of the `QTimer::singleShot(10` bit; any suggestions on how to properly wait for the transactions table to become aware of the new transaction?~
Although I could have called `focusTransaction()` directly from `TransactionView::bumpFee()` I'm using the same signal as the send screen. This should make it easier to move fee bump / transaction replacement functionality around later.
Tree-SHA512: 242055b7c3d32c7b2cf871f5ceda2581221902fd53fa29e0b092713fc16d3191adbe8cbb28417d522dda9febec8cc05e07afe3489cd7caaecd33460c1dde6fbc
6d5fcad576 [gui] Make proxy icon from statusbar clickable (Cristian Mircea Messel)
Pull request description:
Clicking on the proxy icon will open settings showing the network tab
https://github.com/bitcoin/bitcoin/pull/11491#issuecomment-336685303
Tree-SHA512: c3549749296918818694a371326d1a3b1075478918aaee940b5c7119a7e2cb991dcfda78f20d44d6d001157b9b82951f0d5157b17f4f0d1a0a242795efade036
fa091b0016 qa: Add tests for submitheader (MarcoFalke)
36b1b63f20 rpc: Expose ProcessNewBlockHeaders (MarcoFalke)
Pull request description:
This exposes `ProcessNewBlockHeaders` as an rpc called `submitheader`. This can be used to check for invalid block headers and submission of valid block headers via the rpc.
Tree-SHA512: a61e850470f15465f88e450609116df0a98d5d9afadf36b2033d820933d8b6a4012f9f2b3246319c08a0e511bef517f5d808cd0f44ffca91d10895a938004f0b
b2f23c4153 [RPC] Remove getinfo deprecation warning (John Newbery)
Pull request description:
`getinfo` was removed in V0.16. A removal warning message was left in place to tell users that the method had been removed. We can remove that entirely in V0.18.
Tree-SHA512: bf93fbcf57a9be480438dcbdcab2dfd69ce277218b10628776975b093b3ffd2caa1751e0fb4cb0245443c81465693e2b8750e96d3e38632a78bae5ffa04f9212
1f6ff04e59 Use wildcard path in test_bitcoin.vcxproj (Chun Kuan Lee)
90cc69c0c7 ci: Add appveyor.yml to build on MSVC (Chun Kuan Lee)
4d0c7924d2 Make macro compatible with MSVC (Chun Kuan Lee)
Pull request description:
Introduce Appveyor CI for MSVC. This would require the owner adding appveyor to this repo. Also fix some MSVC incompatible code.
This `appveyor.yml` file is modified from @sipsorcery and @NicolasDorier 's code in #12613.
Appveyor CI result: https://ci.appveyor.com/project/ken2812221/bitcoin/build/1.0.151
Tree-SHA512: b5b0f1686a33e54325ea6de81606806a7d9a0f8d4acbb97c9ce598386e8fcb2220def264777609ed2b850ac8c490fd181303ea522c5a70487272d46995f4c52d
5df6f089b5 More tests of signer checks (Andrew Chow)
7c8bffdc24 Test that a non-witness script as witness utxo is not signed (Andrew Chow)
8254e9950f Additional sanity checks in SignPSBTInput (Pieter Wuille)
c05712cb59 Only wipe wrong UTXO type data if overwritten by wallet (Pieter Wuille)
Pull request description:
The current PSBT signing code can end up producing a non-segwit signature, while only the UTXO being spent is provided in the PSBT (as opposed to the entire transaction being spent). This may be used to trick a user to incorrectly decide a transaction has the semantics he intends to sign.
Fix this by refusing to sign if there is any mismatch between the provided data and what is being signed.
Tree-SHA512: b55790d79d8166e05513fc4c603a982a33710e79dc3c045060cddac6b48a1be3a28ebf8db63f988b6567b15dd27fd09bbaf48846e323c8635376ac20178956f4
bd19cc78cf Serialize non-witness utxo as a non-witness tx but always deserialize as witness (Andrew Chow)
43811e6338 Fix PSBT deserialization of 0-input transactions (Andrew Chow)
Pull request description:
0-input transactions can be ambiguously deserialized as being witness transactions. Since the unsigned transaction is never serialized as a witness transaction as it has no witnesses, we should always deserialize it as a non-witness transaction and set the serialization flags as such.
When a transaction is serliazed for the non-witness-utxo, it is always a valid network transaction and thus it should be always be deserialized as a witness transaction and the deserialzation flags are set as such.
Fixes#13958
Tree-SHA512: 1937b3cb2618534478d4f533541fb9efce3cb5badb5d1964bfe19400f4aacc6c8ecedaf1f20d26b20baf94f81fd07dfb15b3b08089ecbd63aeecbc18c7c48086
Strip out the witnesses when serializing the non-witness utxo. However
witness serializations are allowed, so make sure we always deserialize
as witness.
0-input transactions can be ambiguously deserialized as being witness
transactions. Since the unsigned transaction is never serialized as
a witness transaction as it has no witnesses, we should always
deserialize it as a non-witness transaction and set the serialization
flags as such.
Also always serialize the unsigned transaction as a non-witness transaction.
fa5ce27385 ui: Compile boost:signals2 only once (MarcoFalke)
Pull request description:
ui is one of the modules that poison other modules with `boost/signals2` headers. This moves the include to the cpp file and uses a forward declaration in the header.
Locally this speeds up the incremental build (building everything that uses the ui module) with gcc by ~5% for me. Gcc uses ~5% less memory.
Would be nice if someone could verify the numbers roughly.
I presume the improvements will be more pronounced if the other models would stop exposing the boost header as well.
Tree-SHA512: 078360eba330ddbca4268bd8552927eae242a239e18dfded25ec20be72650a68cd83af7ac160690249b943d33ae35d15df1313f1f60a0c28b9526853aa7d1e40
6ad0328f1c Don't assert(foo()) where foo has side effects (practicalswift)
Pull request description:
Don't `assert(foo())` where `foo` has side effects.
From `assert(3)`:
> If the macro `NDEBUG` is defined at the moment `<assert.h>` was last included, the macro `assert()` generates no code, and hence does nothing at all.
Bitcoin currently cannot be compiled without assertions, but we shouldn't rely on that.
Tree-SHA512: 28cff0c6d1c2fb612ca58c9c94142ed01c5cfd0a2fecb8e59cdb6c270374b215d952ed3491d921d84dc1b439fa49da4f0e75e080f6adcbc6b0e08be14e54c170
869193f5a6 docs: fixed bitcoin-cli -help output for help2man (Hennadii Stepanov)
Pull request description:
Currently `bitcon-cli -help` output forces help2man to produce `.TP` and `.IP` commands instead of a single `.IP` command for `-stdinrpcpass` option.
Removing an extra space fixes this issue.
This pull request is rebased from #13879
Tree-SHA512: 1c5b25ed2ef7b7de42bc6210165bdbabe63f045699487f2db4790e0d3176f6493dfd3e8e19f4ddc38b551539465d7b41aea570f20dccbc0609f00fdfee1b5180
4b7091a842 Replace median fee rate with feerate percentiles (Marcin Jachymiak)
Pull request description:
Currently, the `medianfeerate` statistic is calculated from the feerate of the middle transaction of a list of transactions sorted by feerate.
This PR instead uses the value of the 50th percentile weight unit in the block, and also calculates the feerate at the 10th, 25th, 75th, and 90th percentiles. This more accurately corresponds with what is generally meant by median feerate.
Tree-SHA512: 59255e243df90d7afbe69839408c58c9723884b8ab82c66dc24a769e89c6d539db1905374a3f025ff28272fb25a0b90e92d8101103e39a6d9c0d60423a596714
e306be7429 Use 72 byte dummy signatures when watching only inputs may be used (Andrew Chow)
48b1473c89 Use 71 byte signature for DUMMY_SIGNATURE_CREATOR (Andrew Chow)
18dfea0dd0 Always create 70 byte signatures with low R values (Andrew Chow)
Pull request description:
When creating signatures for transactions, always make one which has a 32 byte or smaller R and 32 byte or smaller S value. This results in signatures that are always less than 71 bytes (32 byte R + 32 byte S + 6 bytes DER + 1 byte sighash) with low R values. In most cases, the signature will be 71 bytes.
Because R is not mutable in the same way that S is, a low R value can only be found by trying different nonces. RFC 6979 for deterministic nonce generation has the option to specify additional entropy, so we simply use that and add a uin32_t counter which we increment in order to try different nonces. Nonces are sill deterministically generated as the nonce used will the be the first one where the counter results in a nonce that results in a low R value. Because different nonces need to be tried, time to produce a signature does increase. On average, it takes twice as long to make a signature as two signatures need to be created, on average, to find one with a low R.
Having a fixed size signature makes size calculations easier and also saves half a byte of transaction size, on average.
DUMMY_SIGNATURE_CREATOR has been modified to produce 71 byte dummy signatures instead of 72 byte signatures.
Tree-SHA512: 3cd791505126ce92da7c631856a97ba0b59e87d9c132feff6e0eef1dc47768e81fbb38bfbe970371bedf9714b7f61a13a5fe9f30f962c81734092a4d19a4ef33
18f690ec2f wallet: shuffle coins before grouping, where warranted (Karl-Johan Alm)
Pull request description:
Coins are randomly shuffled in coin selection to avoid unintentional privacy leaks regarding the user's coin set. For the case where a user has a lot of coins with the same destination, these will be grouped into groups of 10 *before* the shuffling.
It is unclear whether this has any implications at all, but this PR plugs the potential issue, if there ever is one, by shuffling the coins before they are grouped.
Issue brought up in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204554549
Tree-SHA512: fb50ed4b5fc03ab4853d45b76e1c64476ad5bcd797497179bc37b9262885c974ed6811159fd8e581f1461b6cc6d0a66146f4b70a2777c0f5e818d1322e0edb89
The `help2man` parses a string containing two spaces between words with an issue:
it gives out `.TP` and `.IP` commands instead of a single `.IP` command.
Removing an extra space fixes this issue.
Currently the `-help` output for the `-stdin` option looks without any issue due to eliminating
of two spaces between words by a `FormatParagraph` call for this particular case.
For consistency and preventing from future regressions extra spaces have been removed from the both lines.
The redundant `strprintf` call has been removed aswell.
Make sure that translations are synchronized with transifex before the
branch-off point to minimize the difference and prevent duplicate work.
Tree-SHA512: 41e71eaf14094606fd90011d035c551a635d5a715f865a49841dbe2b54a76b7fbf59a7918f86e5fd80a717e2934a9613fe463391fd01848d0a01e5c4e7e7fef0
This commit removes the `CBloomFilter::CBloomFilter(const unsigned int, const double, const unsigned int)` constructor, which became obsolete with 086ee67.
Removes medianfeerate result from getblockstats.
Adds feerate_percentiles which give the feerate of the 10th, 25th, 50th,
75th, and 90th percentile weight unit in the block.
bb5b1c0b2d [Docs] upgrade rescan time warning from minutes to >1 hour (Mason Simon)
Pull request description:
When I rescanned just now it took well over an hour. The time warning "may take minutes" didn't prepare me for that.
```
2018-08-08T03:10:17Z [wallet] Still rescanning. At block 174747. Progress=0.008341
2018-08-08T03:11:17Z [wallet] Still rescanning. At block 204233. Progress=0.024533
2018-08-08T03:12:17Z [wallet] Still rescanning. At block 221170. Progress=0.038340
...
2018-08-08T04:16:17Z [wallet] Still rescanning. At block 524815. Progress=0.957105
2018-08-08T04:17:17Z [wallet] Still rescanning. At block 528572. Progress=0.971323
2018-08-08T04:18:17Z [wallet] Still rescanning. At block 532458. Progress=0.986824
```
This is on a 4-core 4ghz system with a 7200rpm drive.
Tree-SHA512: 722ccf566bfd6a3381fa173e08849cb676fe4c1f1cb2c4b86b07df2a5dc1ca0d54797cbe8fd606cdc2c60fef2be7c98e052460decdac2132ba759cff822132e8
227d27e70c Use pushKV in some new PSBT RPCs. (Daniel Kraft)
Pull request description:
Most of the code uses `UniValue::pushKV` where appropriate, but some new RPC code related to PSBTs did not. This fixes those places - after this change, there are no remaining source files I could find that contain `push_back(Pair(`.
Tree-SHA512: d6567cf144d05d7e42276bd66ff4cd44413328f985772d11bb9d7339d32ab7c3438d4bb0040a37e75f8d193c610b08fa971073935885e0a178546aa045daf9fa
e254ff5d53 Introduce a maximum size for locators. (Gregory Maxwell)
Pull request description:
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
Locators are cheap to process so allowing a few more is harmless,
so this sets the maximum to 64-- which is enough for blockchains
with 2^64 blocks before the get overhead starts increasing.
Tree-SHA512: da28df9c46c988980da861046c62e6e7f93d0eaab3083d32e408d1062f45c00316d5e1754127e808c1feb424fa8e00e5a91aea2cc3b80326b71c148696f7cdb3
With watching only inputs, we do not know how large the signatures
for those inputs will be as their signers may not have implemented
71 byte signatures. Thus we estimate their fees using the 72 byte
dummy signature to ensure that we pay enough fees.
This only effects fundrawtransaction when includeWatching is true.
When extra entropy is not specified by the caller, CKey::Sign will
now always create a signature that has a low R value and is at most
70 bytes. The resulting signature on the stack will be 71 bytes when
the sighash byte is included.
Using low R signatures means that the resulting DER encoded signature
will never need to have additional padding to account for high R
values.
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
This sets the limit to an absurdly high amount of 101 in order to
maximize compatibility with existing software.
faab63111d shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
23fbbb100f wallet: sum ancestors rather than taking max in output groups (Karl-Johan Alm)
Pull request description:
This is pointed out in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204549758.
Basically, the ancestors gives an indication as to how many ancestors the resulting transaction will have, which is more precise when summing up the values, rather than taking the maximum, since all the coins in the group will become ancestors if selected.
Tree-SHA512: 0588c4b6059669650614817e041526a2ab89dda8c07fca8e077c7669dca1fed51cd164f7df56340840ab60285d48f3b140dcee64f64bf696b2dd4ab16d556a13
13bb5cae31 Docs: fix GetWarnings docs to reflect behavior (Ben Woosley)
Pull request description:
In "gui", it returns all warnings, joined by a separator
In "statusbar", it returns the last warning set which seems notionally to be the most important, though that is debatable
Tree-SHA512: 5fc0dc68d143a040b7b893b7176188e2b064c2cf1d559420906e4de636e16e9ab7451a1b87603020a7a8f66d6b94f4ee6c7da2697efad879f9e6de9c0e0c9ac1
faa24441ec policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
93de2891fa wallet: assert to ensure accuracy of CMerkleTx::GetBlocksToMaturity (Ben Woosley)
Pull request description:
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Tree-SHA512: 8e71c26f09fe457cfb00c362ca27066f7f018ea2af1f395090fdc7fd9f5964b76f4317c23f7a4923776f00087558511da5c1c368095be39fb1bacc614a93c32f
a1a998cf24 wallet: Fix backupwallet for multiwallets (Daniel Kraft)
Pull request description:
`backupwallet` was broken for multiwallets in their own directories (i.e. something like `DATADIR/wallets/mywallet/wallet.dat`). In this case, the backup would use `DATADIR/wallets/wallet.dat` as source file and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source file was not present) or would silently back up the wrong wallet; especially the latter behaviour can be quite bad for users.
Tree-SHA512: 7efe2450ca047e40719fcc7cc211ed94699056020ac737cada7b59e8240298675960570c45079add424d0aab520437d5050d956acd695a9c2452dd4317b4d2c4
This commit slightly changes the format of the "Usage" strings in CLI
`-help` messages to meet the expection of the help2man tool, which we
use to generate man pages. On the way, we remove a few calls to
`strprintf()`, which became superficial after commit 32fbfda.
They should also work with any other mutex type which std::unique_lock
supports.
There is no change in behavior for current code that calls these macros with
CCriticalSection mutexes.
Fix that the early bailout optimization tests did not test the actual
selection because their utxo pool was polluted by the make_hard_case test
preceding.
7bf22bf0c2 gui: Reject options dialog when key escape is pressed (João Barbosa)
4a43306a4f gui: Reject edit address dialog when key escape is pressed (João Barbosa)
f7a553177d gui: Add GUIUtil::ItemDelegate with keyEscapePressed signal (João Barbosa)
Pull request description:
Currently `EditAddressDialog` and `OptionsDialog` don't close when the escape key is pressed. The `QDataWidgetMapper` instances prevents closing the dialogs because the escape key is used to reset the widgets values. More details and workarounds in https://stackoverflow.com/a/51487847 and http://qtramblings.blogspot.com/2010/10/qdatawidgetmapper-annoyances.html.
The adopted solution is different from the above references. It turns out that `QDataWidgetMapper::setItemDelegate` sets the event filter for all mapped widgets. So in this PR the mapper's delegate are changed to a custom `GUIUtil::ItemDelegate` that offers the signal `keyEscapePressed`, which is connected to the `QDialog::reject` slot.
Note that the installed event filter lets all events pass, so the current behaviour isn't changed, meaning that widgets values are reset in addition to closing the dialog.
Tree-SHA512: 9c961d488480b4ccc3880a11a8f1824b65f77570ee8918c7302c62775a1a73e52ae988a31a55ffff87b4170ddbecf833c2f09b66095c00eb6854a4d43f030f1f
312ff01ee5 -prune option -help output aligned with code (Hennadii Stepanov)
Pull request description:
The -help output for -prune is aligned with the code.
In the code (.../src/init.cpp#L1063):
```
if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) {
return InitError(strprintf(_("Prune configured below the minimum of %d MiB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
}
```
So correct value of nPruneTarget is **greater than or equal to** MIN_DISK_SPACE_FOR_BLOCK_FILES.
Tree-SHA512: 8e55aa99c8f5a9d020677b0f1b016215e2dbda5fa4ee7c8504b12a3abef226bc21beca118fa332c0bf206a4aff913a5a717b55bb5b2ecdba38423e9c0161209e
fa365021bb doc: Remove outdated net comment (MarcoFalke)
Pull request description:
`mapAddresses` and the corresponding "critsect" has been removed in 5fee401fe1 more than 6 years ago. Now is probably a good time to remove this confusing comment.
Tree-SHA512: 498a403d5703da395c18a7ebb776aa6e693e59fe43a839fefd261e0a5af58621763813979d4cfbd8d1728ce73b325b82002e393cde79bdbff33e0fbf68ab6747
fe7180c5b2 [trivial,doc] Fix memory consistency model in comment (Jesse Cohen)
Pull request description:
Updating a comment overlooked during review in #13247
Tree-SHA512: 0bd54ba1c265fdd77fd6e12ad0be46dd422348f7d926ce9abaca53fdb3a3c55c0d1cd90b4382321352076f4a81e2249c0014cd789f47a3637cb93bd983cb4657
f6b7fc349c Support h instead of ' in hardened descriptor paths (Pieter Wuille)
fddea672eb Add experimental warning to scantxoutset (Jonas Schnelli)
6495849bfd [QA] Extend tests to more combinations (Pieter Wuille)
1af237faef [QA] Add xpub range tests in scantxoutset tests (Jonas Schnelli)
151600bb49 Swap in descriptors support into scantxoutset (Pieter Wuille)
0652c3284f Descriptor tests (Pieter Wuille)
fe8a7dcd78 Output descriptors module (Pieter Wuille)
e54d76044b Add simple FlatSigningProvider (Pieter Wuille)
29943a904a Add more methods to Span class (Pieter Wuille)
Pull request description:
As promised, here is an implementation of my output descriptor concept (https://gist.github.com/sipa/e3d23d498c430bb601c5bca83523fa82) and integration within the `scantxoutset` RPC that was just added through #12196.
It changes the RPC to use descriptors for everything; I hope the interface is simple enough to encompass all use cases. It includes support for P2PK, P2PKH, P2WPKH, P2SH, P2WSH, multisig, xpubs, xprvs, and chains of keys - combined in every possible way.
Tree-SHA512: 63b54a96e7a72f5b04a8d645b8517d43ecd6a65a41f9f4e593931ce725a8845ab0baa1e9db6a7243190d8ac841f6e7e2f520d98c539312d78f7fd687d2c7b88f
a13647b8bd [qa] Add test for too-large wallet output groups (Suhas Daftuar)
57ec1c97b2 [wallet] correctly limit output group size (Suhas Daftuar)
Pull request description:
Also add a test to ensure that output groups are being limited, even if a wallet has many outputs corresponding to the same scriptPubKey (the test fails without the first commit).
Tree-SHA512: 2aaa82005b0910488f5cbf40690d4c5e2f46949e299ef70b4cb6e440713811443d411dcbc6d71b1701fd82423073125e21747787d70830cd021c841afb732d51
cbeaa91dbb Update ValidationInterface() documentation to explicitly specify threading and memory model (Jesse Cohen)
b296b425a7 Update documentation for SingleThreadedSchedulerClient() to specify the memory model (Jesse Cohen)
9994d01d8b Add Unit Test for SingleThreadedSchedulerClient (Jesse Cohen)
Pull request description:
As discussed in #13023 I've split this test out into a separate pr
This test (and documentation update) makes explicit the guarantee (previously undefined, but implied by the 'SingleThreaded' in `SingleThreadedSchedulerClient()`) - that callbacks pushed to the `SingleThreadedSchedulerClient()` obey the single threaded model for memory and execution - specifically, the callbacks are executed fully and in order, and even in cases where a subsequent callback is executed by a different thread, sequential consistency of memory for all threads executing these callbacks is maintained.
Maintaining memory consistency should make the api more developer friendly - especially for users of the validationinterface. To the extent that there are performance implications from this decision, these are not currently present in practice because all use of this scheduler happens on a single thread currently, furthermore the lock should guarantee consistency across callback executions even when callbacks are executed by multiple threads (as the test does).
Tree-SHA512: 5d95a7682c402e5ad76b05bc9dfbca99ca64105f62ab9e78f6fc0f6ea8c5277aa399fbb94298e35cc677b0c2181ff17259584bb7ae230e38aa68b85ecbc22856
494634a052 bench: Make CoinSelection output groups pass eligibility filter (Andrew Chow)
Pull request description:
Set the depth of the output groups used in the CoinSelection benchmark to be 6 in order to pass the eligibility filter for the benchmark.
Fixes#13813
Tree-SHA512: 55fc6aeda0127f5e155efb982aec211b70dfd3257808dce627886af6866ffa25de4df3c9b10f8c45b6c298a42542c54654f36e59efb208e9055885361f0e501c
247d5740d2 Ignore unknown config file options for now (Pieter Wuille)
04ce0d88ca Report when unknown config file options are ignored (Pieter Wuille)
Pull request description:
As reported by @satwo on IRC a few days ago, the current mechanism of treating unknown config file options as errors is problematic for options like `-rpcclienttimeout` which aren't defined for `bitcoind`.
A full solution would be to either make all binaries be aware of each other's options, or to permit config file options that only apply to specific binaries (`bitcoind`, `bitcoin-qt`, `bitcoin-cli`). Both of these seem too invasive to introduce for 0.17.
As a compromise, this PR makes it ignores those options, but still warn about it in the log file.
Tree-SHA512: dfddc771b91df3031a9c98d9f3292f8f4fcd1b97ebb7317b2f457e12d9f205dc63f42721302e7258dbb53f273d7cc041a65a0a9120972769555784e1f1cc9aef
fa8f2d826c doc: Fix chainTxData comment (MarcoFalke)
fa6094f152 chainparams: Update with data from assumed valid chain (MarcoFalke)
Pull request description:
Can be reviewed by using the `getblock` and `getchaintxstats` rpcs of a synced node. Reviewers get extra points when their full node has checkpoints and assumevalid disabled.
Tree-SHA512: cedd61fde129ae4c16fc12275b61e4c5659b6d72dd801c608efc294188561bc986d94652fe9bea71ada48654258e2a074d2d2da78036c69608ccff3a6cc1ccf5
fa5ed4f8d2 refactor: Avoid locking tx pool cs thrice (MarcoFalke)
Pull request description:
`addUnchecked` is (outside the tests) only called by ATMP, which already takes the tx pool read lock. So locking it twice more in both `addUnchecked` methods seems redundant.
Similarly `CalculateMemPoolAncestors` is (beside once in the wallet) only called in contexts, where the tx pool lock is already taken. So remove the lock there as well.
Tree-SHA512: fcf603b570da0fc529fe6db8add218663eae52845510732bee0d4611263d2429d3d3c9c8ae68493d67287d13504500ed51905ccbe711eb15a0af3b019edad543
All but one call to GetBlocksToMaturity is testing it relative to 0
for the purposes of determining whether the coinbase tx is immature.
In such case, the value greater than 0 implies that the tx is coinbase,
so there is no need to separately test that status.
This names the concept for easy singular use.
