The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
Allows network wallets and other clients to see transactions that respend
a prevout already spent in an unconfirmed transaction in this node's mempool.
Knowledge of an attempted double-spend is of interest to recipients of the
first spend. In some cases, it will allow these recipients to withhold
goods or services upon being alerted of a double-spend that deprives them
of payment.
As before, respends are not added to the mempool.
Anti-Denial-of-Service-Attack provisions:
- Use a bloom filter to relay only one respend per mempool prevout
- Rate-limit respend relays to a default of 100 thousand bytes/minute
- Define tx2.IsEquivalentTo(tx1): equality when scriptSigs are not considered
- Do not relay these equivalent transactions
Remove an unused variable declaration in txmempool.cpp.
Relax the AreInputsStandard() tests for P2SH transactions --
allow any Script in a P2SH transaction to be relayed/mined,
as long as it has 15 or fewer signature operations.
Rationale: https://gist.github.com/gavinandresen/88be40c141bc67acb247
I don't have an easy way to test this, but the code changes are
straightforward and I've updated the AreInputsStandard unit tests.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
f0a83fc Use Params().NetworkID() instead of TestNet() from the payment protocol (jtimon)
2871889 net.h was using std namespace through chainparams.h included in protocol.h (jtimon)
c8c52de Replace virtual methods with static attributes, chainparams.h depends on protocol.h instead of the other way around (jtimon)
a3d946e Get rid of TestNet() (jtimon)
6fc0fa6 Add RPCisTestNet chain parameter (jtimon)
cfeb823 Add RequireStandard chain parameter (jtimon)
21913a9 Add AllowMinDifficultyBlocks chain parameter (jtimon)
d754f34 Move majority constants to chainparams (jtimon)
8d26721 Get rid of RegTest() (jtimon)
cb9bd83 Add DefaultCheckMemPool chain parameter (jtimon)
2595b9a Add DefaultMinerThreads chain parameter (jtimon)
bfa9a1a Add MineBlocksOnDemand chain parameter (jtimon)
1712adb Add MiningRequiresPeers chain parameter (jtimon)
New RPC methods: return an estimate of the fee (or priority) a
transaction needs to be likely to confirm in a given number of
blocks.
Mike Hearn created the first version of this method for estimating fees.
It works as follows:
For transactions that took 1 to N (I picked N=25) blocks to confirm,
keep N buckets with at most 100 entries in each recording the
fees-per-kilobyte paid by those transactions.
(separate buckets are kept for transactions that confirmed because
they are high-priority)
The buckets are filled as blocks are found, and are saved/restored
in a new fee_estiamtes.dat file in the data directory.
A few variations on Mike's initial scheme:
To estimate the fee needed for a transaction to confirm in X buckets,
all of the samples in all of the buckets are used and a median of
all of the data is used to make the estimate. For example, imagine
25 buckets each containing the full 100 entries. Those 2,500 samples
are sorted, and the estimate of the fee needed to confirm in the very
next block is the 50'th-highest-fee-entry in that sorted list; the
estimate of the fee needed to confirm in the next two blocks is the
150'th-highest-fee-entry, etc.
That algorithm has the nice property that estimates of how much fee
you need to pay to get confirmed in block N will always be greater
than or equal to the estimate for block N+1. It would clearly be wrong
to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay
12 uBTC and it will take LONGER".
A single block will not contribute more than 10 entries to any one
bucket, so a single miner and a large block cannot overwhelm
the estimates.
f40dbee remove CPubKey::VerifyCompact( ) which is never used (Kamil Domanski)
28b6c1d remove GetMedianTime( ) which is never used (Kamil Domanski)
5bd4adc remove LookupHostNumeric( ) which is never used (Kamil Domanski)
595f691 remove LogException( ) which is never used (Kamil Domanski)
f4057cb remove CTransaction::IsNewerThan which is never used (Kamil Domanski)
0e31e56 remove CWallet::AddReserveKey which is never used (Kamil Domanski)
397668e Deduplicate uint* comparison operator logic (Pieter Wuille)
df9eb5e Move {Get,Set}Compact from bignum to uint256 (Pieter Wuille)
a703150 Add multiplication and division to uint160/uint256 (Pieter Wuille)
4d480c8 Exception instead of assigning 0 in case of wrong vector length (Pieter Wuille)
eb2cbd7 Deduplicate shared code between uint160 and uint256 (Pieter Wuille)
787ee0c Check redeemScript size does not exceed 520 byte limit (Peter Todd)
4d79098 Increase IsStandard() scriptSig length (Peter Todd)
f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails (Peter Todd)
6380180 Add rejection of non-null CHECKMULTISIG dummy values (Peter Todd)
29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag (Peter Todd)
68f7d1d Create (MANDATORY|STANDARD)_SCRIPT_VERIFY_FLAGS constants (Peter Todd)
Generally useless information. Only updates on connect time, not after
that. Peers can easily lie and the median filter is not effective in
preventing that.
In the past it was used for progress display in the GUI but
`CheckPoints::guessVerificationProgress` provides a better way that is now used.
It was too easy to mislead it. Peers do lie about it in practice, see issue #4065.
From the RPC, `getpeerinfo` gives the peer raw values, which are more
useful.
- introduce DEFAULT_SCRIPTCHECK_THREADS in main.h
- only show values from -"MAX_HW_THREADS" up to 16 for -par, as it
makes no sense to try to leave more "cores free" than the system
supports anyway
- use the new constant in optionsdialog and remove defaults from
.ui file
This resolves a case in which a mismatch could be used to bloat up the
mempool by sending transactions that pay enough fee to relay, but not
to be mined, with the default policies.
5770254 Copyright header updates s/2013/2014 on files whose last git commit was done in 2014. contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does. (gubatron)
Extend CMerkleTx::GetDepthInMainChain with the concept of
a "conflicted" transaction-- a transaction generated by the wallet
that is not in the main chain or in the mempool, and, therefore,
will likely never be confirmed.
GetDepthInMainChain() now returns -1 for conflicted transactions
(0 for unconfirmed-but-in-the-mempool, and >1 for confirmed).
This makes getbalance, getbalance '*', and listunspent all agree when there are
mutated transactions in the wallet.
Before:
listunspent: one 49BTC output
getbalance: 96 BTC (change counted twice)
getbalance '*': 46 BTC (spends counted twice)
After: all agree, 49 BTC available to spend.
contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does.
Keep track of which block is being requested (and to be requested) from
each peer, and limit the number of blocks in-flight per peer. In addition,
detect stalled downloads, and disconnect if they persist for too long.
This means blocks are never requested twice, and should eliminate duplicate
downloads during synchronization.
In case the total number of orphan blocks in memory exceeds a limit
(currently set to 750), a random orphan block (which is not
depended on by another orphan block) is dropped. This means it will
need to be downloaded again, but it won't consume memory until then.
c117d9e Support for error messages and a few more rejection reasons (Luke Dashjr)
14e7ffc Use standard BIP 22 rejection reasons where applicable (Luke Dashjr)
This changes the block processing logic from "try to atomically switch
to a new block" to a continuous "(dis)connect a block, aiming for the
assumed best chain".
This means the smallest atomic operations on the chainstate become
individual block connections or disconnections, instead of entire
reorganizations. It may mean that we try to reorganize to one block,
fail, and rereorganize again to the old block. This is slower, but
doesn't require unbounded RAM.
It also means that a ConnectBlock which fails may be no longer called
from the ProcessBlock which knows which node sent it. To deal with that,
a mapBlockSource is kept, and invalid blocks cause asynchronous "reject"
messages and banning (if necessary).
After discussing with BlueMatt, this appears to be harmless in its
current state since it's always set before it's used. Initialize it
anyway for readability and future safety.
Use misc methods of avoiding unnecesary header includes.
Replace int typedefs with int##_t from stdint.h.
Replace PRI64[xdu] with PRI[xdu]64 from inttypes.h.
Normalize QT_VERSION ifs where possible.
Resolve some indirect dependencies as direct ones.
Remove extern declarations from .cpp files.
As block index entries have a flag for marking invalid blocks, the
'best invalid work' information can be derived from there. In addition,
remove the global from main.h
This removes a few unused CBlockLocator methods, and moves the
construction and fork-finding logic to CChain (which can do these
more efficiently, as it has a height-indexable chain available).
It also makes CBlockLocator independent from the validation code.
There have been several incidents where mainnet experimentation with
raw transactions resulted in insane fees. This is hard to prevent
in the raw transaction api because the inputs may not be known.
Since sending doesn't work if the inputs aren't known, we can catch
it there.
This rejects fees > than 10000 * nMinRelayTxFee or 1 BTC with the
defaults and can be overridden with a bool at the rpc.
Orphan transactions were stored as a CDataStream pointer;
this changes the mapOrphanTransactions data structures to
store orphans as a CTransaction.
This also fixes CVE-2013-4627 by always re-serializing
transactions before relaying them.
The new class is accessed via the Params() method and holds
most things that vary between main, test and regtest networks.
The regtest mode has two purposes, one is to run the
bitcoind/bitcoinj comparison tool which compares two separate
implementations of the Bitcoin protocol looking for divergence.
The other is that when run, you get a local node which can mine
a single block instantly, which is highly convenient for testing
apps during development as there's no need to wait 10 minutes for
a block on the testnet.
This (nearly) doesn't change fee rules at all:
* To make it into the fee transaction area, the dPriority comparison
changed from < to <=
* We now just ignore transactions > MAX_BLOCK_SIZE/4 instead of
doing some calculations to require increasingly large fees as
size increases.
Removed AreInputsStandard from CTransaction, made it a regular function in main.
Moved CTransaction::GetOutputFor to CCoinsViewCache.
Moved GetLegacySigOpCount and GetP2SHSigOpCount out of CTransaction into regular functions in main.
Moved GetValueIn and HaveInputs from CTransaction into CCoinsViewCache.
Moved AllowFree, ClientCheckInputs, CheckInputs, UpdateCoins, and CheckTransaction out of CTransaction and into main.
Moved IsStandard and IsFinal out of CTransaction and put them in main as IsStandardTx and IsFinalTx. Moved GetValueOut out of CTransaction into main. Moved CTxIn, CTxOut, and CTransaction into core.
Added minimum fee parameter to CTxOut::IsDust() temporarily until CTransaction is moved to core.h so that CTxOut needn't know about CTransaction.
Remove the pnext pointer in CBlockIndex, and replace it with a
vBlockIndexByHeight vector (no effect on memory usage). pnext can
now be replaced by vBlockIndexByHeight[nHeight+1], but
FindBlockByHeight becomes constant-time.
This also means the entire mapBlockIndex structure and the block
index entries in it become purely blocktree-related data, and
independent from the currently active chain, potentially allowing
them to be protected by separate mutexes in the future.
* Bugfix: output the correct best block hash (during IBD, it can
differ from the actual current best block)
* Add height to output
* Add hash_serialized, which is a hash of the entire UTXO state.
Can be useful to compare two nodes.
* Add total_amount, the sum of all UTXOs' values.
Every block index entry currently requires a separately-allocated
CBigNum. By replacing them with uint256, it's just 32 bytes extra
in CBlockIndex itself.
This should save us a few megabytes in RAM, and less allocation
overhead.
- remove an unneeded MODAL flag, as MSG_ERROR sets MODAL
- re-order an if-clause in main to have bool checks before a function call
- fix some log messages that used wrong function names
- make a log message use a correct ellipsis
- remove some unneded spaces, brackets and line-breaks
- fix style for adding files in the Qt project
Extremely large transactions with lots of inputs can cost the network
almost as much to process as they cost the sender in fees.
We would never create transactions larger than 100K big; this change
makes transactions larger than 100K non-standard, so they are not
relayed/mined by default. This is most important for miners that might
create blocks larger than 250K big, who could be vulnerable to a
make-your-blocks-so-expensive-to-verify-they-get-orphaned attack.
* Pass txid's to CCoinsView functions by reference instead of by value
* Add a method to swap CCoins, and use it in some places to avoid a
allocating copy + destruct.
* Optimize CCoinsViewCache::FetchCoins to do only a single search
through the backing map.
By specifying -txindex when initializing the database, a txid-to-diskpos
index is maintained in the blktree database. This database is used to
help answering getrawtransaction() RPC queries, when enabled.
Changing the -txindex value requires a -reindex; the client will abort
at startup if the database and the specified -txindex mismatch.
Fixes issue #2178 : attacker could penny-flood with invalid-signature
transactions to deduce which addresses belonged to your node.
I'm committing this early for code review; I still need to write up
a test plan.
Executive summary of fix: check all transactions received from the network
for penny-flood rate-limiting before adding to the memory pool. But do NOT
ratelimit transactions added to the memory pool:
- because of blockchain reorgs
- stored in the wallet and added at startup
- sent from the GUI or one of the send* RPC commands (CWallet::CommitTransaction)
The limit-free-transactions code really should be a method on CNode, with
counters per-peer. But that is a bigger change for another day.
* During block verification (when parallelism is requested), script
check actions are stored instead of being executed immediately.
* After every processed transactions, its signature actions are
pushed to a CScriptCheckQueue, which maintains a queue and some
synchronization mechanism.
* Two or more threads (if enabled) start processing elements from
this queue,
* When the block connection code is finished processing transactions,
it joins the worker pool until the queue is empty.
As cs_main is held the entire time, and all verification must be
finished before the block continues processing, this does not reach
the best possible performance. It is a less drastic change than
some more advanced mechanisms (like doing verification out-of-band
entirely, and rolling back blocks when a failure is detected).
The -par=N flag controls the number of threads (1-16). 0 means auto,
and is the default.
-checklevel gets a new meaning:
0: verify blocks can be read from disk (like before)
1: verify (contextless) block validity (like before)
2: verify undo files can be read and have good checksums
3: verify coin database is consistent with the last few blocks
(close to level 6 before)
4: verify all validity rules of the last few blocks
Level 3 is the new default, as it's reasonably fast. As level 3 and
4 are implemented using an in-memory rollback of the database, they
are limited to as many blocks as possible without exceeding the
limits set by -dbcache. The default of -dbcache=25 allows for some
150-200 blocks to be rolled back.
In case an error is found, the application quits with a message
instructing the user to restart with -reindex. Better instructions,
and automatic recovery (when possible) or automatic reindexing are
left as future work.
When a transaction A is in the memory pool, while a transaction B
(which shares an input with A) gets accepted into a block, A was
kept forever in the memory pool.
This commit adds a CTxMemPool::removeConflicts method, which
removes transactions that conflict with a given transaction, and
all their children.
This results in less transactions in the memory pool, and faster
construction of new blocks.
These flags select features to be enabled/disabled during script
evaluation/checking, instead of several booleans passed along.
Currently these flags are defined:
* SCRIPT_VERIFY_P2SH: enable BIP16-style subscript evaluation
* SCRIPT_VERIFY_STRICTENC: enforce strict adherence to pubkey/sig encoding standards.
- remove an unwanted ";" at the end of the ~CCoinsView() destructor
- in FindBlockPos() and FindUndoPos() only call fclose(), is file is open
- fix an error string in the CBlockUndo class
Flushes the blktree/ and coins/ databases, and reindexes the
block chain files, as if their contents was loaded via -loadblock.
Based on earlier work by Jeff Garzik.
Split off CBlockTreeDB and CCoinsViewDB into txdb-*.{cpp,h} files,
implemented by either LevelDB or BDB.
Based on code from earlier commits by Mike Hearn in his leveldb
branch.
To prevent excessive copying of CCoins in and out of the CCoinsView
implementations, introduce a GetCoins() function in CCoinsViewCache
with returns a direct reference. The block validation and connection
logic is updated to require caching CCoinsViews, and exploits the
GetCoins() function heavily.
Use CBlock's vMerkleTree to cache transaction hashes, and pass them
along as argument in more function calls. During initial block download,
this results in every transaction's hash to be only computed once.
During the initial block download (or -loadblock), delay connection
of new blocks a bit, and perform them in a single action. This reduces
the load on the database engine, as subsequent blocks often update an
earlier block's transaction already.
This switches bitcoin's transaction/block verification logic to use a
"coin database", which contains all unredeemed transaction output scripts,
amounts and heights.
The name ultraprune comes from the fact that instead of a full transaction
index, we only (need to) keep an index with unspent outputs. For now, the
blocks themselves are kept as usual, although they are only necessary for
serving, rescanning and reorganizing.
The basic datastructures are CCoins (representing the coins of a single
transaction), and CCoinsView (representing a state of the coins database).
There are several implementations for CCoinsView. A dummy, one backed by
the coins database (coins.dat), one backed by the memory pool, and one
that adds a cache on top of it. FetchInputs, ConnectInputs, ConnectBlock,
DisconnectBlock, ... now operate on a generic CCoinsView.
The block switching logic now builds a single cached CCoinsView with
changes to be committed to the database before any changes are made.
This means no uncommitted changes are ever read from the database, and
should ease the transition to another database layer which does not
support transactions (but does support atomic writes), like LevelDB.
For the getrawtransaction() RPC call, access to a txid-to-disk index
would be preferable. As this index is not necessary or even useful
for any other part of the implementation, it is not provided. Instead,
getrawtransaction() uses the coin database to find the block height,
and then scans that block to find the requested transaction. This is
slow, but should suffice for debug purposes.
Introduce a AllocateFileRange() function in util, which wipes or
at least allocates a given range of a file. It can be overriden
by more efficient OS-dependent versions if necessary.
Block and undo files are now allocated in chunks of 16 and 1 MiB,
respectively.
Change the block storage layer again, this time with multiple files
per block, but tracked by txindex.dat database entries. The file
format is exactly the same as the earlier blk00001.dat, but with
smaller files (128 MiB for now).
The database entries track how many bytes each block file already
uses, how many blocks are in it, which range of heights is present
and which range of dates.
The CTxUndo class encapsulates data necessary to undo the effects of
a transaction on the txout set, namely the previous outputs consumed
by it (script + amount), and potentially transaction meta-data when
it is spent entirely.
The CCoins class represents a pruned set of transaction outputs from
a given transaction. It only retains information about its height in
the block chain, whether it was a coinbase transaction, and its
unspent outputs (script + amount).
It has a custom serializer that has very low redundancy.
Special serializer/deserializer for amount values. It is optimized for
values which have few non-zero digits in decimal representation. Most
amounts currently in the txout set take only 1 or 2 bytes to
represent.
Special serializers for script which detect common cases and encode
them much more efficiently. 3 special cases are defined:
* Pay to pubkey hash (encoded as 21 bytes)
* Pay to script hash (encoded as 21 bytes)
* Pay to pubkey starting with 0x02, 0x03 or 0x04 (encoded as 33 bytes)
Other scripts up to 121 bytes require 1 byte + script length. Above
that, scripts up to 16505 bytes require 2 bytes + script length.
