class template base_uint had its own private lookup table.
This is saving 256 bytes per instantiation.
The result is not spectacular as bitcoin-qt has only shrinked of
about 1Kb but it is still valid improvement.
Also, I have replaced a for loop with a memset() call.
Made CBigNum::SetHex() use the new HexDigit() function.
Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net>
This ensures the allocator is ready no matter when it's needed (as
some STL implementations allocate in constructors -- i.e., MSVC's STL
in debug builds).
Using boost::call_once to guarantee thread-safe static initialization.
Adding some comments describing why the change was made.
Addressing deinitialization of the LockedPageManager object
by initializing it in a local static initializer and adding
an assert in the base's destructor.
As we'd previously learned, OSX's fsync is a data eating lie.
Since 0.8.4 we're still getting some reports of disk corruption on
OSX but now all of it looks like the block files have gotten out of
sync with the database. It turns out that we were still using fsync()
on the block files, so this isn't surprising.
The new class is accessed via the Params() method and holds
most things that vary between main, test and regtest networks.
The regtest mode has two purposes, one is to run the
bitcoind/bitcoinj comparison tool which compares two separate
implementations of the Bitcoin protocol looking for divergence.
The other is that when run, you get a local node which can mine
a single block instantly, which is highly convenient for testing
apps during development as there's no need to wait 10 minutes for
a block on the testnet.
- removes our NewThread() function an replaces remaining calls with
boost::thread with our TraceThread template
- remove ExitThread() function
- fix THREAD_PRIORITY_ABOVE_NORMAL for non Windows OSes
- explicitly set the default of all GetBoolArg() calls
- rework getarg_test.cpp and util_tests.cpp to cover this change
- some indentation fixes
- move macdockiconhandler.h include in bitcoin.cpp to the "our headers"
section
Create a boost::thread_group object at the qt/bitcoind main-loop level
that will hold pointers to all the main-loop threads.
This will replace the vnThreadsRunning[] array.
For testing, ported the BitcoinMiner threads to use its
own boost::thread_group.
This fixes test_bitcoin failures on openbsd reported by dhill on IRC.
On some systems rand() is a simple LCG over 2^31 and so it produces
an even-odd sequence. ApproximateBestSubset was only using the least
significant bit and so every run of the iterative solver would be the
same for some inputs, resulting in some pretty dumb decisions.
Using something other than the least significant bit would paper over
the issue but who knows what other way a system's rand() might get us
here. Instead we use an internal RNG with a period of something like
2^60 which is well behaved. This also makes it possible to make the
selection deterministic for the tests, if we wanted to implement that.
Initialize the OutputDebugStringF mutex and file pointer using
boost::call_once, to be thread-safe.
Make the return value of OutputDebugStringF really be the number of
characters written (*printf() semantics).
Declare the fReopenDebugLog flag volatile, since it is changed from
a signal handler.
And don't declare OutputDebugStringF() as inline.
When the coin database is out of date with the block database, the
best block in it is automatically switched to. This reconnection
process can take time, so allow it to be interrupted.
This also stops block connection as soon as shutdown is requested,
leading to a faster shutdown.
- fix ThreadSafeMessageBox always displays error icon
- allow to specify MSG_ERROR / MSG_WARNING or MSG_INFORMATION without a
custom caption / title
- allow to specify CClientUIInterface::ICON_ERROR / ICON_WARNING and
ICON_INFORMATION (which is default) as message box icon
- remove CClientUIInterface::OK from ThreadSafeMessageBox-calls, as
the OK button will be set as default, if none is specified
- prepend "Bitcoin - " to used captions
- rename BitcoinGUI::error() -> BitcoinGUI::message() and add function
documentation
- change all style parameters and enum flags to unsigned
- update code to use that new API
- update Client- and WalletModel to use new BitcoinGUI::message() and
rename the classes error() method into message()
- include the possibility to supply the wanted icon for messages from
Client- and WalletModel via "style" parameter
As memset() can be optimized out by a compiler it should not be used in
privacy/security relevant code parts. OpenSSL provides the safe
OPENSSL_cleanse() function in crypto.h, which perfectly does the job of
clean and overwrite data.
For details see: http://www.viva64.com/en/b/0178/
- change memset() to OPENSSL_cleanse() where appropriate
- change a hard-coded number from netbase.cpp into a sizeof()
Introduce a AllocateFileRange() function in util, which wipes or
at least allocates a given range of a file. It can be overriden
by more efficient OS-dependent versions if necessary.
Block and undo files are now allocated in chunks of 16 and 1 MiB,
respectively.
Memory locks do not stack, that is, pages which have been locked several times by calls to mlock()
will be unlocked by a single call to munlock(). This can result in keying material ending up in swap when
those functions are used naively. In this commit a class "LockedPageManager" is added
that simulates stacking memory locks by keeping a counter per page.
This does two things:
1) Now does not output to debug.log if -printtodebugger flag is passed
2) Unit tests set -printtodebugger so only test results are output to stdout
Note that -printtodebugger only actually prints to the debugger on Windows.
- ensure warnings always start with "Warning:" and that the first
character after ":" is written uppercase
- ensure the first sentence in warnings ends with an "!"
- remove unneeded spaces from Warning-strings
- add missing Warning-string translation
- remove a "\n" and replace with untranslatable "<br><br>"
NOTE: This is currently disabled, until a developer with FreeBSD/OpenBSD
can confirm that this works (without causing undefined behaviour
preferrably).
Signed-off-by: Giel van Schijndel <me@mortis.eu>
NOTE: These thread names are visible in gdb when using 'info threads'.
Additionally both 'top' and 'ps' show these names *unless* told to
display the command-line instead of task name.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
This commit adds support for .onion addresses (mapped into the IPv6
by using OnionCat's range and encoding), and the ability to connect
to them via a SOCKS5 proxy.
Prior to this change, each TX typically generated 3+ debug messages,
askfor tx 8644cc97480ba1537214 0
sending getdata: tx 8644cc97480ba1537214
askfor tx 8644cc97480ba1537214 1339640761000000
askfor tx 8644cc97480ba1537214 1339640881000000
CTxMemPool::accept() : accepted 8644cc9748 (poolsz 6857)
After this change, there is only one message for each valid TX received
CTxMemPool::accept() : accepted 22a73c5d8c (poolsz 42)
and two messages for each orphan tx received
ERROR: FetchInputs() : 673dc195aa mempool Tx prev not found 1e439346fc
stored orphan tx 673dc195aa (mapsz 19)
The -debugnet option, or its superset -debug, will restore the full debug
output.
- Signals now go directly from the core to WalletModel/ClientModel.
- WalletModel subscribes to signals on CWallet: Prepares for multi-wallet support, by no longer assuming an implicit global wallet.
- Gets rid of noui.cpp, the few lines that were left are merged into init.cpp
- Rename wxXXX message flags to MF_XXX, to make them UI indifferent.
- ThreadSafeMessageBox no longer returns the value `4` which was never used, converted to void.
The best log rotation method formerly available was to configure
logrotate with the copytruncate option. As described in the logrotate
documentation, "there is a very small time slice between copying the
file and truncating it, so some logging data might be lost".
By sending SIGHUP to the server process, one can now reopen the debug
log file without losing any data.
Acquire an exclusive, advisory lock before sending output to debug.log
and release it when we're done. This should avoid output from multiple
threads being interspersed in the log file.
We can't use CRITICAL_SECTION machinery for this because the debug log
is written during startup and shutdown when that machinery is not
available.
(Thanks to Gavin for pointing out the CRITICAL_SECTION problems based
on his earlier work in this area)
In ISO C++, the signedness of 'char' is undefined. On some platforms (e.g.
ARM), 'char' is an unsigned type, but some of the code relies on 'char' being
signed (as it is on x86). This is indicated by compiler warnings like this:
bignum.h: In constructor 'CBigNum::CBigNum(char)':
bignum.h:81:59: warning: comparison is always true due to limited range of data type [-Wtype-limits]
util.cpp: In function 'bool IsHex(const string&)':
util.cpp:427:28: warning: comparison is always false due to limited range of data type [-Wtype-limits]
In particular, IsHex erroneously returned true regardless of the input
characters, as long as the length of the string was a positive multiple of 2.
Note: For testing, it's possible using GCC to force char to be unsigned by
adding the -funsigned-char parameter to xCXXFLAGS.
This commit removes the dependency of serialize.h on PROTOCOL_VERSION,
and makes this parameter required instead of implicit. This is much saner,
as it makes the places where changing a version number can have an
influence obvious.
Where possible, use boost::filesystem::path instead of std::string or
char* for filenames. This avoids a lot of manual string tinkering, in
favor of path::operator/.
GetDataDir is also reworked significantly, it now only keeps two cached
directory names (the network-specific data dir, and the root data dir),
which are decided through a parameter instead of pre-initialized global
variables.
Finally, remove the "upgrade from 0.1.5" case where a debug.log in the
current directory has to be removed.
All client version information is moved to version.cpp, which optionally
(-DHAVE_BUILD_INFO) includes build.h. build.h is automatically generated
on supporting platforms via contrib/genbuild.sh, using git describe.
The git export-subst attribute is used to put the commit id statically
in version.cpp inside generated archives, and this value is used if no
build.h is present.
The gitian descriptors are modified to use git archive instead of a
copy, to create the src/ directory in the output. This way,
src/src/version.cpp will contain the static commit id. To prevent
gitian builds from getting the "-dirty" marker in their git-describe
generated identifiers, no touching of files or running sed on the
makefile is performed anymore. This does not seem to influence
determinism.
This commit simplifies the locking system: CCriticalSection becomes a
simple typedef for boost::interprocess::interprocess_recursive_mutex,
and CCriticalBlock and CTryCriticalBlock are replaced by a templated
CMutexLock, which wraps boost::interprocess::scoped_lock.
By making the lock type a template parameter, some critical sections
can now be changed to non-recursive locks, which support waiting via
condition variables. These are implemented in CWaitableCriticalSection
and WAITABLE_CRITICAL_BLOCK.
CWaitableCriticalSection is a wrapper for a different Boost mutex,
which supports waiting/notification via condition variables. This
should enable us to remove much of the used polling code. Important
is that this mutex is not recursive, so functions that perform the
locking must not call eachother.
Because boost::interprocess::scoped_lock does not support assigning
and copying, I had to revert to the older CRITICAL_BLOCK macros that
use a nested for loop instead of a simple if.
- rename wxMessageBox, remove redundant arguments to noui/qtui calls
- also, add flag to force blocking, modal dialog box for disk space warning etc
- clarify function naming
- no more special MessageBox needed from AppInit2, as window object is created before calling AppInit2
This introduces CNetAddr and CService, respectively wrapping an
(IPv6) IP address and an IP+port combination. This functionality used
to be part of CAddress, which also contains network flags and
connection attempt information. These extra fields are however not
always necessary.
These classes, along with logic for creating connections and doing
name lookups, are moved to netbase.{h,cpp}, which does not depend on
headers.h.
Furthermore, CNetAddr is mostly IPv6-ready, though IPv6
functionality is not yet enabled for the application itself.
Remembering all time samples makes nTimeOffset slow to respond to
system clock corrections. For instance, I start my node with a system
clock that's 30 minutes slow and run it for a few days. During that
time, I accumulate 10,000 offset samples with a median of 1800
seconds. Now I correct my system clock. Without this change, my node
must collect another 10,000 samples before nTimeOffset is correct
again. With this change, I must only accumulate 100 samples to
correct the offset.
Storing unlimited time samples also allows an attacker with many IP
addresses (ex, a large botnet) to perform a memory exhaustion attack
against Bitcoin nodes. The attacker sends a version message from each
IP to his target, consuming more of the target's memory each time.
Time samples are small, so this attack might be impractical under the
old code, but it's impossible with the new code.
The full list of time samples is rarely useful outside of debugging.
The node's time offset, however is useful for discovering local clock
drift, so it's displayed in all logging modes.
Replaced all occurrences of #if* __WXMSW__ with WIN32,
and all occurrences of __WXMAC_OSX__ with MAC_OSX, and made
sure those are defined appropriately in the makefile and bitcoin-qt.pro.
This replaces the openssl-based base64 encoder and decoder with a more
efficient internal one. Tested against the rfc4648 test vectors.
Decoder is based on JoelKatz' version.
Makefiles now build bitcoind only.
qmake/make in top-level directory is used to build Bitcoin QT
Deleted almost all #ifdef GUI from the code (left one possibly controversial one)
Deleted xpm/ files.
