* The "ERROR" was printed far too often during normal operation for what was not an error.
* Makes the Socks5() connect failure similar to the IP connect failure in debug.log.
Before:
`2016-05-09 00:15:00 ERROR: Proxy error: host unreachable`
After:
`2016-05-09 00:15:00 Socks5() connect to t6xj6wilh4ytvcs7.onion:18333 failed: host unreachable"`
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
Nagle appears to be a significant contributor to latency now that the static
sleeps are gone. Most of our messages are relatively large compared to
IP + TCP so I do not expect this to create enormous overhead.
This may also reduce traffic burstyness somewhat.
Fix two CSubNet constructor problems:
- The use of `/x` where 8 does not divide x was broken, due to a
bit-order issue
- The use of e.g. `1.2.3.4/24` where the netmasked bits in the network
are not 0 was broken. Fix this by explicitly normalizing the netwok
according to the bitmask.
Also add tests for these cases.
Fixes#6179. Thanks to @jonasschnelli for reporting and initial fix.
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
This avoids connecting to them again too soon in ThreadOpenConnections.
Make an exception for connection failures to the proxy as these
shouldn't affect the status of specific nodes.
Avoids that SOCKS5 negotiation will hold up the shutdown process.
- Sockets can stay in non-blocking mode, no need to switch it on/off
anymore
- Adds a timeout (20 seconds) on SOCK5 negotiation. This should be
enough for even Tor to get a connection to a hidden service, and
avoids blocking the opencon thread indefinitely on a hanging proxy.
Fixes#2954.
Split up util.cpp/h into:
- string utilities (hex, base32, base64): no internal dependencies, no dependency on boost (apart from foreach)
- money utilities (parsesmoney, formatmoney)
- time utilities (gettime*, sleep, format date):
- and the rest (logging, argument parsing, config file parsing)
The latter is basically the environment and OS handling,
and is stripped of all utility functions, so we may want to
rename it to something else than util.cpp/h for clarity (Matt suggested
osinterface).
Breaks dependency of sha256.cpp on all the things pulled in by util.
aa82795 Add detailed network info to getnetworkinfo RPC (Wladimir J. van der Laan)
075cf49 Add GetNetworkName function (Wladimir J. van der Laan)
c91a947 Add IsReachable(net) function (Wladimir J. van der Laan)
60dc8e4 Allow -onlynet=onion to be used (Wladimir J. van der Laan)
Simpler alternative to #4348.
The current setup with closesocket() is strange. It poses
as a compatibility wrapper but adds functionality.
Rename it and make it a documented utility function in netbase.
Code movement only, zero effect on the functionality.
In the LookupIntern(), things changed are:
1. Call getaddrinfo_a() instead of getaddrinfo() if available, the former is a sync version of the latter;
2. Try using inet_pton()/inet_addr() to convert the input text to a network addr structure at first, if success the extra name resolving thread inside getaddrinfo_a() could be avoided;
3. An interruption point added in the waiting loop for return from getaddrinfo_a(), which completes the improve for thread responsiveness.
A easy way to see the effect is to kick off a 'bitcoind stop' immediately after 'bitcoind -daemon', before the change it would take several, or even tens of, minutes on a bad network situation to wait for the running bitcoind to exit, now it costs only seconds.
Signed-off-by: Huang Le <4tarhl@gmail.com>
f40dbee remove CPubKey::VerifyCompact( ) which is never used (Kamil Domanski)
28b6c1d remove GetMedianTime( ) which is never used (Kamil Domanski)
5bd4adc remove LookupHostNumeric( ) which is never used (Kamil Domanski)
595f691 remove LogException( ) which is never used (Kamil Domanski)
f4057cb remove CTransaction::IsNewerThan which is never used (Kamil Domanski)
0e31e56 remove CWallet::AddReserveKey which is never used (Kamil Domanski)
Log the name of the error as well as the error code if a network problem
happens. This makes network troubleshooting more convenient.
Use thread-safe strerror_r and the WIN32 equivalent FormatMessage.
The year is 2014. All supported operating systems have IPv6 support,
most certainly at build time (this doesn't mean that IPv6 is configured,
of course).
If noone is exercising the functionality to disable it, that means it
doesn't get tested, and IMO it's better to get rid of it.
(it's also not used consistently in RPC/boost and Net code...)
contrib/devtools/fix-copyright-headers.py script to be able to perform this maintenance task with ease during the rest of the year, every year. Modifications to contrib/devtools/README.md to document what fix-copyright-headers.py does.
After the tinyformat switch sprintf() family functions support passing
actual std::string objects.
Remove unnecessary c_str calls (236 of them) in logging and formatting.
Use misc methods of avoiding unnecesary header includes.
Replace int typedefs with int##_t from stdint.h.
Replace PRI64[xdu] with PRI[xdu]64 from inttypes.h.
Normalize QT_VERSION ifs where possible.
Resolve some indirect dependencies as direct ones.
Remove extern declarations from .cpp files.
As memset() can be optimized out by a compiler it should not be used in
privacy/security relevant code parts. OpenSSL provides the safe
OPENSSL_cleanse() function in crypto.h, which perfectly does the job of
clean and overwrite data.
For details see: http://www.viva64.com/en/b/0178/
- change memset() to OPENSSL_cleanse() where appropriate
- change a hard-coded number from netbase.cpp into a sizeof()
I2P apparently needs 256 bits to store a fully routable address. Garlicat
requires a centralized lookup service to map the 80-bit addresses to fully
routable ones (as far as I understood), so that's not really usable in our
situation.
To support I2P routing and peer exchange for it, another solution is needed.
This will most likely imply a network protocol change, and extension of the
'addr' message.
- fix#1560 by properly locking proxy related data-structures
- update GetProxy() and introduce GetNameProxy() to be able to use a
thread-safe local copy from proxyInfo and nameproxyInfo
- update usage of GetProxy() all over the source to match the new
behaviour, as it now fills a full proxyType object
- rename GetNameProxy() into HaveNameProxy() to be more clear
- I checked every occurance of strprintf() in the code and used %u, where
unsigned vars are used
- the change to GetByte() was made, as ip is an unsigned char
This commit adds support for .onion addresses (mapped into the IPv6
by using OnionCat's range and encoding), and the ability to connect
to them via a SOCKS5 proxy.
Implement the following rules:
* Interpret [X]:Y as host=X port=Y, if Y is an integer
* Interpret X:Y as host=X port=Y, if Y is an integer and X contains no colon
* Interpret X:Y as host=X:Y port=default otherwise
This prevents an undefined operation in main.cpp, when shifting the hash value
left by 32 bits.
Shifting a signed int left into the sign bit is undefined in C++11.
Introduce a boolean variable for each "network" (ipv4, ipv6, tor, i2p),
and track whether we are likely to able to connect to it. Addresses in
"addr" messages outside of our network get limited relaying and are not
stored in addrman.
