60b98f8 [Util] Update tinyformat.h (fanquake)
Pull request description:
Updates `tinyformat.h` to commit c42f/tinyformat@689695c upstream. Including:
8a2812d8485d9e05a34748e2e48789
@achow101 mentioned that since upgrading to Ubuntu 17.10 (GCC 7), tinyformat had been throwing lots of -Wimplicit-fallthrough warnings. However fallthrough warnings should have been silenced by #10489. cc @theuni.
The upstream commit to fix fallthrough warnings is in this PR https://github.com/c42f/tinyformat/pull/39.
The last time tinyformat.h was updated in this repo was in #8274.
Tree-SHA512: a51bd30544693550e08148daf5d244e3a3a410caff7897351eb9cd28f661dc85e193e045bb86068ee4006b2f89a7233b7573b8c50d93d2a9a15a11386fdcc605
This tracks the set of all known invalid-themselves blocks (ie
blocks which we attempted to connect but which were found to be
invalid). This is used to cheaply check if new headers build on an
invalid chain.
While we're at it we also resolve an edge-case in invalidateblock
on pruned nodes which results in them needing a reindex if they
fail to reorg.
This is a simple change that makes our accept requirements the
same as our request requirements, (ever so slightly) further
decoupling our consensus logic from our FindNextBlocksToDownload
logic in net_processing.
There is no reason to wish to store blocks on disk always just
because a peer is whitelisted. This appears to be a historical
quirk to avoid breaking things when the accept limits were added.
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Reading the variable mapBlockIndex requires holding the mutex cs_main.
The new "Disconnect outbound peers relaying invalid headers" code
added in commit 37886d5e2f and merged
as part of #11568 two days ago did not lock cs_main prior to accessing
mapBlockIndex.
cc5c39d [Build] Add AM_OBJCXXFLAGS and QT_PIE_FLAGS to OBJCXXFLAGS to future-proof darwin targets (fanquake)
f8c6697 Fix automake warnings when running autogen.sh (Evan Klitzke)
Pull request description:
Adjusted @eklitzke's commit to completely remove GZIP_ENV.
Added a commit to address OBJCXXFLAGS.
Rebased on master.
Relevant info from @theuni & #11013 below.
--------
GZIP_ENV was indeed added for determinism, but gitian exports this as needed, so it's not really necessary. I'd rather just remove it.
The mm.o rule was added to support XCode 4.2's ancient version of automake. That's irrelevant now, so it makes sense to remove that too.
All darwin targets are PIE by default, so we don't technically need the flags, but I'd be more comfortable if we hooked up the OBJCXXFLAGS in case future ones are added.
--------
The second commit addresses the last point, but could probably use a better commit message.
These warnings are removed from autogen output:
```
Makefile.am:12: warning: user variable 'GZIP_ENV' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/distdir.am: ... overrides Automake variable 'GZIP_ENV' defined here
src/Makefile.am: installing 'build-aux/depcomp'
src/Makefile.am:503: warning: user target '.mm.o' defined here ...
/usr/local/Cellar/automake/1.15.1/share/automake-1.15/am/depend2.am: ... overrides Automake target '.mm.o' defined here
```
Tree-SHA512: bd59df5f6d3aafe35d5e36925bfe61cc71e774583a0438d7dd946c9e7ecf6e59d42f90a58b8cfef0faa404c81050338ad4cefe721b4a949af881e73b6ab254d4
37886d5e2 Disconnect outbound peers relaying invalid headers (Suhas Daftuar)
4637f1852 moveonly: factor out headers processing into separate function (Suhas Daftuar)
Pull request description:
Alternate to #11446.
Disconnect outbound (non-manual) peers that serve us block headers that are already known to be invalid, but exempt compact block announcements from such disconnects.
We restrict disconnection to outbound peers that are using up an outbound connection slot, because we rely on those peers to give us connectivity to the honest network (our inbound peers are not chosen by us and hence could all be from an attacker/sybil). Maintaining connectivity to peers that serve us invalid headers is sometimes desirable, eg after a soft-fork, to protect unupgraded software from being partitioned off the honest network, so we prefer to only disconnect when necessary.
Compact block announcements are exempted from this logic to comply with BIP 152, which explicitly permits nodes to relay compact blocks before fully validating them.
Tree-SHA512: 3ea88e4ccc1184f292a85b17f800d401d2c3806fefc7ad5429d05d6872c53acfa5751e3df83ce6b9c0060ab289511ed70ae1323d140ccc5b12e3c8da6de49936
fd3a2f3 [tests] Add fuzz testing for BlockTransactions and BlockTransactionsRequest (practicalswift)
Pull request description:
The `BlockTransactions` deserialization code is reachable with tainted data via `ProcessMessage(…, "BLOCKTXN", vRecv [tainted], …)`.
The same thing applies to `BlockTransactionsRequest` which is reachable via `"GETBLOCKTXN"`.
Tree-SHA512: 64560ea344bc6145b940472f99866b808725745b060dedfb315be400bd94e55399f50b982149645bd7af7ed9935fd28751d7daf0d3f94a8e2ed3bc52e3325ffb
e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
Currently we have no rotation of outbound peers. If an outbound peer
stops serving us blocks, or is on a consensus-incompatible chain with
less work than our tip (but otherwise valid headers), then we will never
disconnect that peer, even though that peer is using one of our 8
outbound connection slots. Because we rely on our outbound peers to
find an honest node in order to reach consensus, allowing an
incompatible peer to occupy one of those slots is undesirable,
particularly if it is possible for all such slots to be occupied by such
peers.
Protect against this by always checking to see if a peer's best known
block has less work than our tip, and if so, set a 20 minute timeout --
if the peer is still not known to have caught up to a chain with as much
work as ours after 20 minutes, then send a single getheaders message,
wait 2 more minutes, and if a better header hasn't been received by then,
disconnect that peer.
Note:
- we do not require that our peer sync to the same tip as ours, just an
equal or greater work tip. (Doing otherwise would risk partitioning the
network in the event of a chain split, and is also unnecessary.)
- we pick 4 of our outbound peers and do not subject them to this logic,
to be more conservative. We don't wish to permit temporary network
issues (or an attacker) to excessively disrupt network topology.
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
A peer could try to waste our resources by sending us unrequested blocks with
low work, eg to fill up our disk. Since
e2652002b6 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip. This commit fixes that behavior.
7a5f930 Avoid slow transaction search with txindex enabled (João Barbosa)
Pull request description:
This is an alternative to #11507 where a slow search is not attempted (in any case) if `txindex` is enabled.
Tree-SHA512: e680621781a9241c0513ddd79d23b0b42f3ccec8a63ed1c926b35c43321c81c39a1028770397dd5070501dcf644d897026a2bd68a161a4b435f19227c1bbca48
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429Fixes#11429
0aacfa4 Remove accidental stray semicolon (practicalswift)
68feb49 Use nullptr instead of NULL (practicalswift)
c6b07fd Fix a vs. an typo (practicalswift)
Pull request description:
Minor cleanups:
* Typo: Fix a vs. an typo
* Typo: Remove accidental stray semicolon (only remaining instance in repo)
* Correctness/consistency: Use `nullptr` instead of `NULL` (only remaining instance in repo)
Tree-SHA512: 47142e557da9d3fa0b532c46edeb7f356a1f6dc5973e60b0e496badff3581ff696eade542d49da777ac7f2e895129cc8487ccdb1984ff828434fa86f9a56dad0
f4c4e38 [trivial] Make namespace explicit for is_regular_file (John Newbery)
Pull request description:
is_regular_file resolves using argument dependent lookup. Make the
namespace explicit so it's obvious where the function is defined.
For those not familiar with argument dependent lookups:
- http://en.cppreference.com/w/cpp/language/adl
- https://en.wikipedia.org/wiki/Argument-dependent_name_lookup
Thanks to C++ guru @ryanofsky for pointing this out to me.
Tree-SHA512: 919f1818081a8f90c5751181f87e13b06d90f8aec0ab873100434e55c85cca6e0e288ecc7f135e19e9b5dba7952e96b6393864b7840e20b69dd40e92a157928b
7104de8 [wallet] Fix leak in CDB constructor (João Barbosa)
Pull request description:
First commit fixes a minor leak.
Second commit improves the constructor in the failure cases.
Tree-SHA512: 5165413d60ed9fc28203c9fe128adbba03a9ea9e9aa3734d9ea2522dafd815ba0fb8b90fd0809dbc06eb3ad360e7764de01dadf653ade3350fe86f6b8f04bc90
207408b Fix crash via division by zero assertion (Jonas Schnelli)
Pull request description:
Replaces the newly added `assert` for a devision by zero protection by a control structure. Floating point division by zero is defined by the floating point standard and results in +inf or -inf.
Introduced in #11133
Reported by @mzhou, fixes#11501
Tree-SHA512: ac9b4efa3ba52a2aa246fb11170128c4aaf829fd491b649524c85069c6ed33ae612e761809aea9d9a44bdea29a417b3f3a558226495094b5070a42a56b2ac77e
258d33b41 [mempool] Mark unaccepted txs present in mempool as 'already there'. (Karl-Johan Alm)
Pull request description:
I was investigating the reasons for failed imports in mempool and noticed that `LoadMempool()` and `pwallet->postInitProcess()` (for all wallets) are executed concurrently. The wallet will end up importing transactions that `LoadMempool()` later tries to import; the latter will fail due to the tx already being in the mempool.
This PR changes the log message, adding an additional "already there" entry. For transactions not accepted into mempool, a check if they are in the mempool is done first, and if found, they are counted as 'already there', otherwise counted as 'failed'.
Also slight rewording for consistency (successes, failed, expired, ... -> succeeded, failed, expired).
Tree-SHA512: 1a6134a25260917f2768365e0dfd8b278fe3f8287cab38bb028b7de3d517718a2d37696186dc7a23ceab338cc755fbbe7d45358ee94e573610fddd2a0620d6e5
43f76f6ac Add missing comma from rescanblockchain (MeshCollider)
Pull request description:
#7061 forgot a comma in the HelpExampleRpc() for the rescanblockchain RPC, giving an incorrect example command output:
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "rescanblockchain", "params": [100000 120000] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
Was just missed during nit-fixing. This is a trivial fix to add that comma in.
Tree-SHA512: b808f32674af585a1ddb78b25621dff0387dbad79c97d65ff61d8a9a12a94e4b8ecf03eda3f281fe439bddb6c0703c39104dbb279f1718949abd930faaa9042f
fe862c5ad Avoid division by zero in the case of a corrupt estimates file (practicalswift)
Pull request description:
Avoid division by zero in the case of a corrupt estimates file.
Tree-SHA512: 285cb0d566f239d260880026a930a7412d86e31ea3819d5371a36364a241dc76164e68c1da6da8369345fa6037ca0abc5ab82d245058c085d5f1fd50111fba48
Now using a std::unique_ptr, the Db instance is correctly released
when CDB initialization fails.
The internal CDB state and mapFileUseCount are only mutated when
the CDB initialization succeeds.
Note that UpdatedBlockTip is also used in net_processing to
announce new blocks to peers. As this may need additional review,
this change is included in its own commit.
This runs Block{Connected,Disconnected}, SetBestChain, Inventory,
and TransactionAddedToMempool on the background scheduler thread.
Of those, only BlockConnected is used outside of Wallet/ZMQ, and
is used only for orphan transaction removal in net_processing,
something which does not need to be synchronous with anything
else.
This partially reverts #9583, re-enabling some of the gains from
#7946. This does not, however, re-enable the gains achieved by
repeatedly releasing cs_main between each transaction processed.
This avoid calling out to mempool state during coin selection,
balance calculation, etc. In the next commit we ensure all wallet
callbacks from CValidationInterface happen in the same queue,
serialized with each other. This helps to avoid re-introducing one
of the issues described in #9584 [1] by further disconnecting
wallet from current chain/mempool state.
Thanks to @morcos for the suggestion to do this.
Note that there are several race conditions introduced here:
* If a user calls sendrawtransaction from RPC, adding a
transaction which is "trusted" (ie from them) and pays them
change, it may not be immediately used by coin selection until
the notification callbacks finish running. No such race is
introduced in normal transaction-sending RPCs as this case is
explicitly handled.
* Until Block{Connected,Disconnected} and
TransactionAddedToMempool calls also run in the CSceduler
background thread, there is a race where
TransactionAddedToMempool might be called after a
Block{Connected,Disconnected} call happens.
* Wallet will write a new best chain from the SetBestChain
callback prior to having processed the transaction from that
block.
[1] "you could go to select coins, need to use 0-conf change, but
such 0-conf change may have been included in a block who's
callbacks have not yet been processed - resulting in thinking they
are not in mempool and, thus, not selectable."
This prevents the wallet-RPCs-return-stale-info issue from being
re-introduced when new-block callbacks no longer happen in the
block-connection cs_main lock
This is both good practice (we want to move all such callbacks
into a background thread eventually) and prevents a lock inversion
when we go to use this in wallet (mempool.cs->cs_wallet and
cs_wallet->mempool.cs would otherwise both be used).
This is currently unused, but will by used by wallet to cache when
transactions are in the mempool, obviating the need for calls to
mempool from CWalletTx::InMempool()
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
8c2f4b888 Expose more parallelism with relaxed atomics (suggested in #9938). Fix a test to check the exclusive or of two properties rather than just or. (Jeremy Rubin)
Pull request description:
This PR is in response to #10026 and some feedback on #9938.
~Locally, all the checkqueue tests ran 3.2X faster on my machine. The worst offender, `test_CheckQueue_Correct_Random` ran 3.4X faster.~
1. ~Removes `GetRand()` and replaces it with a single deterministic FastRandomContext instance.~ #10321 replicated this
1. Exposes more parallelism with relaxed atomics, increasing chance of catching a bug. This does not change performance on my machine.
1. Makes one test case more restrictive (xor instead of or, see #9938).
Tree-SHA512: a59dfbee0273c713525a130dfedc1c7ff26f50c2aaca1e94ef5d759b1d6ea6338ffbd97f863b9f6209750d8a788a15fa8ae1bf26774ed2473c520811337e6b00
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
bfebc0b Remove dead store in ecdsa_signature_parse_der_lax. (Eelis)
Pull request description:
This was one of the issues found by Clang's static analyzer (#9573).
Tree-SHA512: 3674c56ccdc750bfe42e41d56b1f2058b6921c5354f7e757f6af10a759c5be75e23d6c7932a4524b9a24da308f426803b11deffbfcf09a5898a4204ee61d16d2
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
619bb05 Squashed 'src/univalue/' changes from 16a1f7f6e..fe805ea74 (MarcoFalke)
Pull request description:
The subtree-merge commit also fixes the whitespace for failing tests, such that bisect doesn't break.
Finally, the bump also includes the changes that accidentally modified our subtree, such that the subtree check should work fine now:
```sh
./contrib/devtools/git-subtree-check.sh src/univalue
Tree-SHA512: 3009d1e52b6f41ef89ecc8a000649f08e44395538703f294995a6e913e3fbfb7813d6bd31fdb4acb6127fd4af99c095bf980a12f1f026bb27cacc66e1487cd1e
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
c6a995e Improve readability of DecodeBase58Check(...) (practicalswift)
Pull request description:
Use the more readable form ...
```c++
&vchRet[vchRet.size() - 4]
```
... instead of ...
```c++
&v.end()[-n]
```
Has the added benefit of eliminating a spurious static analyzer warning about improper use of negative values.
Tree-SHA512: 5895310c189e9322082c28f34342ff9a6c238e2cae3f204521111c8a7981bc555af60b42de082c91608c1125dfc244a65c4faf929249a067a51435e2be74cb39
ce2418f [gui] reset addrProxy/addrSeparateProxyTor if colon char missing (Cristian Mircea Messel)
Pull request description:
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
Fixes#11209
Tree-SHA512: 2d9e6987cf05af3f41033290b61d00920f7fe4a65bea7efd96ed417a8ca7866d248f091e09947cc8aad3a6a4aa8b7777211cfff7f379a62188be50df2c46d4b2
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
0da49b5 Skip precompute sighash for transactions without witness (Johnson Lau)
Pull request description:
This saves unnecessary hash caching for non-segwit transactions, but I am not sure if the difference is noticeable.
Tree-SHA512: 5cd733a729a52a45781510b3572b26e76837a94155caa14311c6d23a27a12e9613ff278dfc2592e21f640202782f22c5ad00fca85c4de5efacaa617c48ccb08d
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
f35d033 build: Make "make clean" remove all files created when running "make check" (practicalswift)
Pull request description:
Make `make clean` remove all files created when running `make check`. More specifically: remove also `obj/build.h` and `bench/data/block413567.raw.h` as part of `make clean`.
Before this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
Tree-SHA512: 953e8423485ffd415f0ade6abe0b4c407454f67c332140ef019d89db425bb4a831327b3f634b8d69b17325dcfc6e3ac72dc2ba1ce5462158eecc3c05645e93ba
96c2ce9 Fix validationinterface build on super old boost/clang (Matt Corallo)
Pull request description:
This should fix all the non-dependancy issues for termux builds.
See Github issue #11388.
Tree-SHA512: ff0918fa76a6d4639a6c5b5e045ef053ce1d93eb0b1fe94c5fdfcc4d5e54e1118eeb09676ffd8f6d1acd630a63656944c6274ee3dbd7c09b7129c30647dbf4f9
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
More specifically: remove also obj/build.h and bench/data/block413567.raw.h.
Before this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
cffe85f Skip sys::system(...) call in case of empty command (practicalswift)
6fb8f5f Check that -blocknotify command is non-empty before executing (practicalswift)
Pull request description:
Check that `-blocknotify` command is non-empty before executing.
To make the `BlockNotifyCallback(...)` (`-blocknotify`) behaviour consistent with that of:
* `AlertNotify(...)` (`-alertnotify`)
* `AddToWallet(...)` (`-walletnotify`)
Tree-SHA512: 18272166793a5a8b9cc2a727bfbcea53d38c329a55bc975c02db601329d608a61c20e026ce4b616193ecd3810dca4d3e2cb3bf773898a51872008a8dba96763e
6643b80 Add state message print to AcceptBlock failure message. (Matt Corallo)
Pull request description:
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
This was motivated by #11371 which appears to be exactly such a case, and is not debuggable from the information provided. Not sure how much this would have helped in that case, but it is kinda weird that we can reject a block without ever printing why.
Tree-SHA512: 7a1c2c76080b810212da885c38e091609e409c62918cc326bb36a1096e09b2ae7e26fd4bdaefd79863d2894e2823e463005700a524940f177a59ef09f589b2f1
fd86f998f Squashed 'src/secp256k1/' changes from 84973d393..0b7024185 (MarcoFalke)
Pull request description:
The subtree should now match upstream again. Check with:
```sh
./contrib/devtools/git-subtree-check.sh src/secp256k1
```
The changes are only documentation/refactoring related.
Tree-SHA512: 43e8a95bcbfefef9e19ec38a92d2d57fdd4a16ddf726e036d36a0d806eb6f35b45b40ee69f980430e107895ec8725b5de4e36456b026214675e0b19630bb6fe9
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
fafff1220 qa: Restore bitcoin-util-test py2 compatibility (MarcoFalke)
Pull request description:
Currently `./configure && make check` will look for python3, then python2. As long as we support python2 (and use it as fallback), `make check` should run fine with both python2 and python3.
Fixes#11352 by @Zenitur
Tree-SHA512: a335ebdd224328d6f924fe52a9b97de196926476c9ee04ce3280743ea93bcae355eb2d5d4bed4050c01b2e904105595eac7db2eaa9307207581caa0a98ebcc0b
This fixes "Wallet file not specified" errors when making batch wallet RPC
calls with more than one wallet loaded. This issue was reported by
NicolasDorier <nicolas.dorier@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so
this change has no other effects.
Fixes#11257
Sending a getheaders message with an empty locator and a stop hash
is a request for a single header by hash. The node will respond with
headers for blocks not in the main chain as well as those in the main
chain. To avoid fingerprinting, the node should, however, ignore
requests for headers on side branches that are too old.
46ce223d1 Add tests for CMerkleBlock usage with txids specified (James O'Beirne)
5ab586f90 Consolidate CMerkleBlock constructor into a single method (James O'Beirne)
Pull request description:
What started as a simple task to add test coverage ended up giving way to a light refactoring. This consolidates the mostly-identical `CMerkleBlock` constructors into one (using C++11 constructor delegation) and adds coverage for the by-txids construction case.
### Before
### After
Tree-SHA512: eed84ed3e8bfc43473077b575c8252759a857e37275e4b36ca7cc2c17a65895e5f494bfd9d4aeab09fc6e98fc6a9c641ac7ecc0ddbeefe01a9e4308e7909e529
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
5ddf560 script: Change SignatureHash input index check to an assert. (Jim Posen)
Pull request description:
In the SignatureHash function, the input index must refer to a valid index. This is not enforced equally in the segwit/non-segwit branches and should be an assertion rather than returning a error hash.
Tree-SHA512: a775fc9e9bd9835c0ab36368aa45ab3d53e38f31fd4d2b8684a77ee6028c854c363df038681a59358b30138957573ad63b71d4a722c16e0830fb4fa72669ef39
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
92848e5 Remove unused fTry from push_lock (João Barbosa)
Pull request description:
After #9674 (618ee92) the `fTry` argument in `push_lock` is no longer needed.
Tree-SHA512: a461f2ca9e590a9dfcc7814d9852d85f03712cb4735176b8b2db0e8dc731597c2a515650998ca7d53cf5a0c48b408a974a0704897036c6ed74788fc24c5e73ae
d601f16 Fix invalid memory access in CScript::operator+= (Anthony Towns)
Pull request description:
This is a fix for #11114 -- invoking "s += s" gets turned into "s.insert(s.end(), s.begin(), s.end())" which can result in an invalid memory access is s.capacity() < 2*s.size() (because s gets resized and possibly moved, so s.begin() and s.end() become invalid references when reading the values to be appended).
The fix is straightforward: reserve enough space in advance, so that insert() doesn't need to resize and thus its arguments remain valid.
A simple test case is added as well; though you probably need to run it via valgrind to actually catch the problem when it's not fixed...
Tree-SHA512: 4720d0c17463fdc43b344c45fe603423d20b30d48da1b9d85eeedc505d7f34db1ed5495ef1556459ae962a94717e3c6e8fc441763771901efea210d01322b7ef
bb8376b Verify DBWrapper iterators are taking snapshots (Matt Corallo)
Pull request description:
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
Tree-SHA512: 54f24dabc294962e9c20882f61809604421a661208d1568bb107102248603e8e7c12e929ccb0812a73d4e4f23fea61f1b48e7cc24da5a7260f1d14d89ba88cd6
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
cee28fbc3 Add error string for CLEANSTACK script violation, preventing an "unknown error" if the CLEANSTACK error condition is set. (Mark Friedenbach)
Pull request description:
This prevents an unhelpful "unknown error" from being printed in test logs if the CLEANSTACK error condition is set.
Tree-SHA512: cd6764e930184aef3d662e40c67f2ea8aea8552a26d33a567d0315a19d707a82aa2afad9f48ecbb731aa5b77fbbfbd7a6a3a989fdb1424a1181350052ff2a9b5
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
6f33d8c Correct typo in comments (Johnson Lau)
Pull request description:
I think this is a search and replace mistake
Tree-SHA512: a83e081b817f1607496bfdcee47593d45d75cbe72effe944cdb5494b49a341eeeebdeb954f6db59dfa1ddfa350a117a4b26c754725a3459be78f2a1a093c6fde
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
This eases the during-type validation to allow Bech32 chars.
Once the focus has been lost, the address will be properly verified through IsValidDestinationString
b887676 net: remove now-unused functions (Cory Fields)
45fd754 net: remove now-superfluous numeric resolve (Cory Fields)
2416dd7 net: separate resolving and conecting (Cory Fields)
Pull request description:
This is a greatly simplified version of #10285, which only aims to address async resolving.
It essentially breaks up two wrapper functions for things only used in one place (ConnectSocketDirectly/ConnectThroughProxy) in favor of calling them directly. This allows us to fully handle resolves before attempting a connection, as is necessary for async connections.
As a bonus, I believe the logic is now much easier to follow than before.
Tree-SHA512: f03f618107379edf3efe2a9f3e3677e8f075017ab140a0b4fdc3b8263e6beff148d55256263ab10bc2125ef089ca68e0d8e865beeae176f1eca544e769c976d3
395cef7 Change getmininginfo errors field to warnings (Andrew Chow)
8502b20 Unify help text for GetWarnings output in get*info RPCs (Andrew Chow)
f77f0e4 Add warnings field to getblockchaininfo (Andrew Chow)
Pull request description:
The `getblockchaininfo` output does not contain the `errors` field which the `getinfo`, `getmininginfo`, and `getnetworkinfo` RPCs have. It should have it as the errors pertain to the blockchain. This PR adds that field.
This PR also unifies the help text for the `errors` field and its output position so that all of the `get*info` commands are consistent.
`getnetworkinfo`'s `errors` field is named `warnings`. I did not change this even though it is inconsistent since this naming has been in use for a long time.
Tree-SHA512: 385ab6acfee67fc8816f4d51ab2bd7a623264c7973906dfbab0a171f199e9db16fde19093a5bc3dfbdd4ff5f19d2186b646eb6b3bae0a4d7c9add43650a4a9d9
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
22f816ef4 net: Improve and document SOCKS code (Wladimir J. van der Laan)
Pull request description:
Make the SOCKS code more consistent, and document the constants used.
Tree-SHA512: 1bb04fcd6aacb6bfd2c54989d8298c892036466a895efb88be36fbace041af67c964ae0f5fb76c96f813f20a040109de4e0aac49a20844640e4d7633fcb22f25
In the SignatureHash function, the input index must refer to a valid
index. This is not enforced equally in the segwit/non-segwit branches
and should be an assertion rather than returning a error hash.
This adds the infrastructure `BaseRequestHandler` class that takes care
of converting bitcoin-cli arguments into a JSON-RPC request object, and
converting the reply into a JSON object that can be shown as result.
This is subsequently used to handle the `-getinfo` option, which sends
a JSON-RPC batch request to the RPC server with
`["getnetworkinfo", "getblockchaininfo", "getwalletinfo"]`,
and after reply combines the result into what looks like a `getinfo`
result.
There have been some requests for a client-side `getinfo` and this
is my PoC of how to do it. If this is considered a good idea
some of the logic could be moved up to rpcclient.cpp and
used in the GUI console as well.
Extra-Author: Andrew Chow <achow101@gmail.com>
Changes the errors field to warnings. To maintain compatibility,
the errors field is deprecated and enabled by starting bitcoind with
-deprecatedrpc=getmininginfo
048e0c3e2 [rpc] [tests] Add deprecated RPC test (Cristian Mircea Messel)
d4cdbd6fb [rpc] Deprecate estimatefee RPC (John Newbery)
Pull request description:
Deprecates estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<methodname>` argument. RPC method is removed entirely in version
(x+1).
This gives users fair warning that an RPC is to be removed, and time to change client software if necessary. Deprecation warnings in RPC return values or release notes are easily ignored.
This is a more generic version of the approach I tried to use in #10841, which too late to make it into v0.15.
Tree-SHA512: 9695a600e84b812974387333e4a6805d18972da30befb754e9e4da77cd9815d00c5cc2ee0b0350bdbbdb5fdc6ba47789f8b2c6f5b15c8cd5a1deefcc4832da30
603efe9fc Fix parameter name typo in ErasePurpose walletdb method. (Pierre Rochard)
Pull request description:
The header file has the correct method signature and the one usage in CWallet::DelAddressBook is correctly passing in EncodeDestination(address)
Tree-SHA512: ee0808a74111fd23a1c47ba5ab51de151fdd33a01d92895671e562ac184cbcb33180a3ff26c22e5717595592097b9fa33deca9878d89ce8d34687f09cfadfcf0
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
Deprecate estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<method>` argument. RPC method is removed entirely in
version (x+1).
d01a968 wallet: update stored witness in AddToWallet (Suhas Daftuar)
Pull request description:
Replace witness-stripped wallet transactions with full transactions;
this can happen when upgrading from a pre-segwit wallet to a segwit-
aware wallet.
Tree-SHA512: a348b16b38ae738fa75cf7d3ff50ebd0d0071d5d6061c9a10dc3325fc34f6bc96a67aea21fde460ca20f6178768ee0af04d6d8785b35647f436a9083c4270b07
df10edf More user-friendly error message when partially signing (MeshCollider)
Pull request description:
When partially signing a transaction using `signrawtransaction`, if the wallet doesn't have access to a key, it will output a scary error message `"error": "Operation not valid with the current stack size"`, yet it will partially sign the transaction anyway. This puts a lot of users off, because they don't realise the signing actually succeeded for some inputs. This catches that specific error when signing, and outputs a friendlier message which says `Unable to sign input, invalid stack size (possibly missing key)`.
This is the best way I could think of to fix the issue, but please let me know if you come up with a better way to do it :)
Fixes https://github.com/bitcoin/bitcoin/issues/9988
Tree-SHA512: 65e1d4a49caa4202e1357b0b3f42329d76456c7b4286d63232226e03267809027b0c44e0faaa1da8b86c9ad677e3a3d655698a24fc870d6a661203c9f56ef95b
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
28d4542 Disallow uncompressed pubkeys in bitcoin-tx [multisig] output adds (Matt Corallo)
Pull request description:
Does what it says on the tin.
Tree-SHA512: 324b8da8a9f9a35d3ade74f6c587f981894a085dfea9d64f78de745d5e6ec05c3a7bced487e9aad9c8a48151cd14969a0806f30f80b621edfce0da082fe6f4be
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
3a131b724 Rename out to m_tx_out in CScriptCheck (Johnson Lau)
e91211878 [Refactor] Combine scriptPubKey and amount as CTxOut in CScriptCheck (Johnson Lau)
Pull request description:
This simplifies CScriptCheck by combining scriptPubKey and amount
Tree-SHA512: 6422363cf5394c6cfefb30c1709db6def63230b809cc7697887e4a2e8c684149208edf91dd139e031b9fe732776b2db59305f77c3cba6f333b11cceb39ef0cc2
22fd04beb Remove nBlockMaxSize from miner opt struct as it is no longer used. (Gregory Maxwell)
Pull request description:
Tree-SHA512: f7a0fa380b4173120f33f96de90581cb57b8bd7af50996f0c726845acff7b92bb1212b924495ef89645624239d2b60d19c1cee2a13139b00e917154a33f7da4c
In the case of CKey's destructor, it seems to have been an oversight in
f4d1fc259 not to delete it. At this point, it results in the move
constructors/assignment operators for CKey being deleted, which may have
a performance impact.
2a07f878a Refactor: Modernize disallowed copy constructors/assignment (Dan Raviv)
Pull request description:
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
Tree-SHA512: 878f446be5a136bb2a90643aaeaca62948b575e6ef71ccc5b4b8f373e66f36ced00665128f36504e0ccfee639863d969329c4276154ef9f2a9de9137f0801e01
7a1e873 [script] Unit tests for IsMine (Jim Posen)
d7afe2d [script] Unit tests for script/standard functions (Jim Posen)
Pull request description:
Simply adding unit test coverage.
Tree-SHA512: aaf16b1b07b6d43c884a67f4fd5f83c31bf2c560f78798036d7aa37a3efe71a7ca3c82c4b3ba1f3119bcbe3b78013e64bb0020fe57ebc69aea1cb54943881959
05cae8aef range-based loops and const qualifications in net.cpp (Marko Bencun)
Pull request description:
Plus a use of std::copy() instead of manual copying.
(The loop on line 117 is already done in #10493).
Tree-SHA512: d9839e330c71bb9781a4efa81ee353c9e3fd8a93c2120a309f7a0e516b119dd7abe0f0988546797801258b867a29581978515c05dda9e5b23097e15f705139b4
by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
e53fa4a Remove custom fee radio group (Andrew Chow)
Pull request description:
Removes the extraneous custom fee radio group and its single radio button. The radio button is replaced with a label that has the radio button's text.
Continuation of #11332
Tree-SHA512: b47b675f900ee4e2f4823203a42bb697f707ba67a8504d730c53d4dae511d0ed03226af34efd7ea45570c6111f8b3b6c39ac28f1b5c090de225903442ad4159a
fadf31e wallet: Display non-HD error on first run (MarcoFalke)
Pull request description:
On current master a fresh wallet created with `-usehd=0` is silently created as HD wallet.
An error should be displayed on the first run.
Also, this restores a test that was removed in c22a53cFixes: #11313
Tree-SHA512: 226a4129984324f88a431c7e2726383f6841711f0227d8e9f5b4f89d4bb9f2b8e922e6cf0a6f91d6efa747d139543a236b9f29326fc5d1e5d6f1dea2465d9b85
This was added in order to help OpenNetworkConnection avoid creating a
connection that it would end up aborting. It was necessary because resolving
was done as part of the connection process.
Now that resolving is separated from connecting, this case is detected before
the connection is attempted.
ConnectSocketByName handled resolves as necessary, obscuring the connection
process. With them separated, each can be handled asynchronously.
Also, since proxies must be considered now anyway, go ahead and eliminate the
ConnectSocket wrapper and use ConnectSocketDirectly... directly.
a0b4c2461 Trivial: Fix validation comments (Dan Raviv)
Pull request description:
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Tree-SHA512: ff86ff02c993e8317b9a0decfe5f5b6aae77b7d50e2b253ed73eb553348142bfc30cfeda15fae91907bab8f920e0ea7c52714f4cc7f33a9d6a777f708e2c99ba
std::unordered_map::erase( const_iterator pos ) returns an iterator to the element following the removed one. Use that to optimize (probably minor-performance-wise, and definitely code-structure-wise) the implementation of CCoinsViewCache::BatchWrite().
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
1444c2e Switch memory_cleanse implementation to BoringSSL's to ensure memory clearing even with link-time optimization. (Adam Langley)
Pull request description:
The implementation we currently use from OpenSSL prevents the compiler from optimizing away clensing operations on blocks of memory that are about to be released, but this protection is not extended to link-time optimization. This commit copies the solution cooked up by Google compiler engineers which uses inline assembly directives to instruct the compiler not to optimize out the call under any circumstances. As the code is in-lined, this has the added advantage of removing one more OpenSSL dependency.
Regarding license compatibility, Google's contributions to BoringSSL library, including this code, is made available under the ISC license, which is MIT compatible.
BoringSSL git commit: ad1907fe73334d6c696c8539646c21b11178f20f
Tree-SHA512: 8134998663c1501e3ce48fbbd6ab41de981f0855e3f4d25d2e86ff8056c917d82c751c88e9c39660319ebfbc8283dce594c3e4fc7f87080a212a2cdba57ea511
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Make the non-const overload of CBlockIndex::GetAncestor() reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
cdaf3a1 Fix Qt 0.14.2->0.15.0 segfault if "total at least" is selected (Matt Corallo)
Pull request description:
`QButtonGroup->button()` may return a nullptr.
Accessing the object directly with `setChecked` seems fragile.
This is a simple fix to ensure to never call a button out of bounds (nullptr).
There are probably other places where a sanity check for `QSettings` are required.
Found by @achow101.
Code by @TheBlueMatt.
Tree-SHA512: a1b5d6636382a4e20c4e66ef82de19e6daa8b1b5f21b0f2bc5f51cfb6b37797045c7e29ebead8088ee2b990ed12c549c217cae6aad7566319599d086d526f6dc
5acd82de9 rpc: make estimatesmartfee argument naming consistent with documentation (Wladimir J. van der Laan)
24697c40e rpc: update cli for estimatefee argument rename (Wladimir J. van der Laan)
Pull request description:
The first argument of `estimaterawfee` was renamed from `nblocks` to `conf_target` in 06bcdb8da6. Update the client-side table as well.
This makes #10753 pass again.
Tree-SHA512: 107c0072a45e0f4e083dc803d534973e6bd4c005e62337a867815d7c98ab1c21d97b7a495c32763883975cbbb001b80003001a6709b7d9bdd81ce4d441b667be
Combine fLimitFree and fOverrideMempoolLimit into a single boolean:
bypass_limits. This is used to indicate that mempool limiting based on feerate
should be bypassed. It is used when readding transactions from a reorg and then
the mempool is trimmed to size after all transactions are added and they can be
evaluated in the context of their descendants. No changes to behavior.
b86a42077 when clearing addrman clear mapInfo and mapAddr (Gregory Sanders)
Pull request description:
Power failure on my machine resulted in a corrupted addrman that would hit bad assertions when trying to serialize the "cleared" addrman to disk: 6866b4912b/src/addrman.h (L320)
Tree-SHA512: 07ca8b6cbd88407e5f3f0dccb346ae31bd1392f4210b2d5c5647c853986bfec95cf70240b92bafdc61b90e452a5d8315962738d10c10c2b53fdabff10503d05a
This resolves an issue where estimatesmartfee would return 999
sat/byte instead of 1000, due to floating point loss of precision
Thanks to sipa for suggesting is_integral.
We were saving a div by caching the inverse as a float, but this
ended up requiring a int -> float -> int conversion, which takes
almost as much time as the difference between float mul and div.
There are lots of other more pressing issues with the bench
framework which probably require simply removing the adaptive
iteration count stuff anyway.
No sensible user will ever keep the default settings here, so not
having sensible defaults only serves to screw users who are
paying less attention, which makes for terrible defaults.
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
f151f5f50 [macOS] remove Growl support, remove unused code (Jonas Schnelli)
Pull request description:
There is no longer a reason to support Growl.
A) It went to pay-ware since a couple of years
B) Since OSX 10.8, the operating system has its own modal notification options (Notification Center).
This PR removes support for Growl.
OSX notification centre is still supported after this PR.
Tree-SHA512: eee18098d7354c4e98f927bca9963d4843ff6bceee74795f73a66c27eed33efaac00ec2cabde8807efcbc936b16ab712249006fa13f5a3f55e4d44d163f5f9a0
713a92073 Remove usehd option and warn when it is used (Andrew Chow)
d4c18f733 Bump wallet version number to 159900 (Andrew Chow)
Pull request description:
Bump the wallet version number to 159900 so that new wallets made without a default key will no longer work on previous versions at all. Also remove the `usehd` option to avoid weird interaction with wallet version numbers and HD-ness of wallets.
Tree-SHA512: dd7965505bfad6a926c79afd423236f509229a398a8398076f8d57d90a5974243f9459a61225c4daee560c796f427445c9e55a3ad528a3a97a9123ca6a1269ab
5d2a3995e [trivial] fixup comment for VerifyWallets() (John Newbery)
43b0e81d0 [wallet] Add StartWallets() function to wallet/init.cpp (John Newbery)
290f3c56d [wallet] Add RegisterWalletRPC() function to wallet/init.cpp (John Newbery)
062d63102 [wallet] Add CloseWallets() function to wallet/init.cpp (John Newbery)
77fe07c15 [wallet] Add StopWallets() function to wallet/init.cpp (John Newbery)
2da5eafa4 [wallet] Add FlushWallets() function to wallet/init.cpp (John Newbery)
1b9cee66e [wallet] Rename WalletVerify() to VerifyWallets() (John Newbery)
9c76ba18c [wallet] Rename InitLoadWallet() to OpenWallets() (John Newbery)
Pull request description:
Apologies for the mostly code move only PR. This is a pre-req for both #10740 and #10762
All wallet component initialization/destruction functions are now in their own `wallet/init.cpp` translation unit and are no longer static functions on the CWallet class. The bitcoin_server also no longer has any knowledge that there are multiple wallets in vpwallet.
There should be no changes in behavior from this PR.
Tree-SHA512: 7c260eb094f2fa1a88d803769ba60935810968a7309f731135e4b17623b97f18c03bbcd293c942093d1efce62c6c978f9ff484d54dc9a60bc2fcb5af2d160fcd
Rationale:
- this init function can now open multiple wallets (hence
Wallet->Wallets)
- This is named as the antonym to CloseWallets(), which carries out the
opposite action.
592404f03 Changing &vec[0] to vec.data(), what 9804 missed (MeshCollider)
Pull request description:
This just continues the work of https://github.com/bitcoin/bitcoin/pull/9804
Modifies a lot of `&vector[]`'s to `vector.data()`'s across all the files including tests, just the stuff that 9804 missed
Tree-SHA512: dd1a9dffb999dea4fba78dcc91fe02f90250db86f5c74948e1ff3e8b4036b2154b600555eaa04dece5368920aae3513bc36425dc96e4319ca1041b0928a6b656
2525b972a net: stop both net/net_processing before destroying them (Cory Fields)
80e2e9d0c net: drop unused connman param (Cory Fields)
8ad663c1f net: use an interface class rather than signals for message processing (Cory Fields)
28f11e940 net: pass CConnman via pointer rather than reference (Cory Fields)
Pull request description:
See individual commits.
Benefits:
- Allows us to begin moving stuff out of CNode and into CNodeState (after #10652 and follow-ups)
- Drops boost dependency and overhead
- Drops global signal registration
- Friendlier backtraces
Tree-SHA512: af2038c959dbec25f0c90c74c88dc6a630e6b9e984adf52aceadd6954aa463b6aadfccf979c2459a9f3354326b5077ee02048128eda2a649236fadb595b66ee3
fe09b0197 add missing lock to crypter GetKeys() (Marko Bencun)
5cb3da04b keystore GetKeys(): return result instead of writing to reference (Marko Bencun)
Pull request description:
Issue: #10905
First commit makes GetKeys() return the result instead of writing to a reference to remove some useless lines.
Tree-SHA512: bb51255b5a6cf5488c3d5dee89f539d41f0717f018441d120047f877e0a705a133fb3b7a97d1cf8f73b5d2ed93dd2dbdfcd6f394e40105af2a12e01d397cb402
061297f0a Ensure that data types are consistent (jjz)
Pull request description:
1. nStatus of CBlockIndex is consistent with the definition of Enum(BlockStatus)
2. The BlockHeader is consistent with the type of variable defined in CBlockHeader
Tree-SHA512: 3d4a55c62d3e17b9c83807eae153db4fcfcd8477c9413a45dedfa157563e77b775a66974648d28c9d44ac45a5705eef83b31a8a3b44316dc9814b85526a9d034
c8d38abd6 Refactor tipUpdate as per style guide (MeshCollider)
3b69a08c5 Fix division by zero in time remaining (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10291, https://github.com/bitcoin/bitcoin/issues/11265
progressDelta may be 0 (or even negative according to 11265), this checks for that and prints unknown if it is, because we cannot calculate an estimate for the time remaining (would be infinite or negative).
Tree-SHA512: bc5708e5ed6e4670d008219558c5fbb25709bd99a32c98ec39bb74f94a0b7fa058f3d03389ccdd39e6723e6b5b48e34b13ceee7c051c2db631e51d8ec3e1d68c
9b348ff9e Fix memory leaks in qt/guiutil.cpp (Dan Raviv)
Pull request description:
on macOS:
`listSnapshot` was leaking in `findStartupItemInList()`
`bitcoinAppUrl` was leaking in `[Get|Set]StartOnSystemStartup()`
Tree-SHA512: dd49e1166336cf4f20035d21930f2f99f21f1d9f91a1101b1434a23dd0b92d402ac7efb177473c758d8af1dbab8d8750485583231c5b5854203d2493f0b43e73
ee4d1493e Drop upgrade-cancel callback registration for a generic "resumeable" (Matt Corallo)
Pull request description:
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "cancelable" boolean, as StartShutdown
is pretty much always what you'll want to use to cancel. Use the
same boolean to allow cancel during initial block verification.
Tree-SHA512: 515817aaa4b9e3e856200e00be9c2d44ecfa2d4f288fe3e02116105fe85de2650c13076ee7e45396ec1ce6ab45e53b0477cddda7cfdee5b3bd0589cb81a4c346
d2be7b25b Typo in optionsdialog.ui Tooltip displayed ampersand incorrectly, & should be in text. (James Evans)
Pull request description:
Tooltip displayed ampersand incorrectly, & should be in text property rather than tooltip so that access key is correctly displayed for accessibility.
Tree-SHA512: 331848207317d37d4d9db40119d0b7ae9a276d06cd1b057cd0e87d508e1aa769b785246ca30ca9156db632798ec9f68ba8bf78cf42904267b4187bd27cfced35
