8b56fc0b91 [qa] Test that v0 segwit outputs can't be spent pre-activation (Suhas Daftuar)
ccb8ca42a4 Always enforce SCRIPT_VERIFY_WITNESS with P2SH (Suhas Daftuar)
5c31b20a35 [qa] Remove some pre-activation segwit tests (Suhas Daftuar)
95749a5836 Separate NULLDUMMY enforcement from SEGWIT enforcement (Suhas Daftuar)
ce650182f4 Use P2SH consensus rules for all blocks (Suhas Daftuar)
Pull request description:
As discussed at the IRC meeting back in October (https://botbot.me/freenode/bitcoin-core-dev/2017-10-12/?msg=92231929&page=2), I had looked into the feasibility of enforcing P2SH and SCRIPT_VERIFY_WITNESS back to the genesis block.
The P2SH change is pretty straightforward -- there was only one historical block on mainnet that violated the rule, so I carved out an exception to it, similar to the way we have exceptions for the BIP30 violators.
The segwit change is not entirely as clear. The code changes themselves are relatively straightforward: we can just always turn on SCRIPT_VERIFY_WITNESS whenever P2SH is active. However conceptually, this amounts to splitting up BIP141 into two parts, the part that implements new script rules, and the part that handles witness commitments in blocks.
Arguably though the script rules are really defined in BIP 143 anyway, and so this really amounts to backdating BIP 143 -- script rules for v0 segwit outputs -- back to genesis. So maybe conceptually this isn't so bad...
I don't feel strongly about this change in either direction; I started working on it because I was searching for a way to simplify the way we understand and implement the consensus rules around segwit, but I'm not yet sure whether I think this achieves anything toward that goal.
ping @TheBlueMatt
Tree-SHA512: 73551d4a983eb9792c7ac67f56005822528ac4d1fd52c27cee6d305ebee953f69687ef4ddee8bdc0fec77f77e6b5a9d669750793efee54c076533a095e233042
Seems providing at least minimal visibility to the failure is a good practice.
The only remaining ignored state is in LoadExternalBlockFile, where logging
would likely be spammy.
To reflect its actual status as a member rather than a global value.
g_failed_blocks was previously global: 2862aca40f
-BEGIN VERIFY SCRIPT-
sed -i 's/g_failed_blocks/m_failed_blocks/g' src/validation.cpp
-END VERIFY SCRIPT-
0ef7b40 [doc] Fix comment in FindForkInGlobalIndex (James O'Beirne)
Pull request description:
The comment erroneously implies that we're searching `chainActive` for the
first block common to `locator`, but we're using the parameter `chain`.
Tree-SHA512: 42ba0fb378597820bdf1eaff1e3e284097baa312e7dd8448421c8c71aa91c353ea6c840860afcb7725f392431f3134d4feb271b96ab7058a62f84f48e468e714
This commit moves P2SH activation back to the genesis block, with
a hardcoded exception for the one historical block in the chain that
violated this rule.
4a6c0e3dcf Modernize best block mutex/cv/hash variable naming (Pieter Wuille)
45dd135039 Fix csBestBlock/cvBlockChange waiting in rpc/mining (Pieter Wuille)
Pull request description:
This is an alternative to #11694.
It reintroduces a uint256 variable with the best block hash, protected by csBestBlock, and only updated while holding it.
Also rename the involved variable to modern guidelines, as there are very few uses.
Tree-SHA512: 826a86c7d3cee7fe49f99f4398ae99e81cb0563197eaeba77306a3ca6072b67cdb932bc35720fc0f99c2a57b218efa029d0b8bdfb240591a629b2e90efa3199d
FlushStateToDisk(...) won't do anything besides check if we need to prune if
FLUSH_STATE_NONE is given. We avoid reading the variable fCheckForPruning
which is guarded by the mutex cs_LastBlockFile.
0e7c52d Shut down if trying to connect a corrupted block (Suhas Daftuar)
Pull request description:
(Updated OP after reworking the approach)
Shut down if a corrupted block is found in ConnectBlock(). This prevents an infinite loop trying to connect such a block, and alerts the node operator that there may be potential hardware failure.
Tree-SHA512: f20d56aa9d36d6eeff4c3d13c0fbd14f06a57701bd13c2416d36f0cc4235f81f752139e336a073617e8e803782c5096c960108af122b19a51227de512e9095ee
d207207 [logging] add lint-logs.sh to check for newline termination. (John Newbery)
5c21e6c [logging] Comment all continuing logs. (John Newbery)
Pull request description:
Check that all calls to LogPrintf() are terminated by a newline,
except those that are explicitly marked as 'continued' logs.
Tree-SHA512: fe5162b2b2df1e8a4c807da87584fa9af97a6b8377e4090fe0caa136d90bf29a487a123cde94569bdce7101fee3478196d99aa13f1212e24bfe5f41c773604fc
Most logs should terminated with a '\n'. Some logs
are built up over multiple calls to logPrintf(), so
do not need a newline terminater. Comment all of
these 'continued' logs as a linter hing.
b55555d rpc: Add testmempoolaccept (MarcoFalke)
Pull request description:
To check if a single raw transaction makes it into the current transaction pool, one had to call `sendrawtransaction`. However, on success, this adds the transaction to the mempool with no easy way to undo.
The call `testmempoolaccept` is introduced to provide a way to solely check the result without changing the mempool state.
Tree-SHA512: 5afd9311190135cee8fc1f229c7d39bf893f1028f29e28d34f70df820198ff97b4bf86b41cbbd6e6c36a5c30073cefa92d541c74a4939c7a2a6fa283dfd41b63
a7c45bc Add native support for serializing char arrays without FLATDATA (Pieter Wuille)
Pull request description:
Support is added to serialize arrays of type `char` or `unsigned char` directly, without any wrappers. All invocations of the `FLATDATA` wrappers that are obsoleted by this are removed.
This includes a patch by @ryanofsky to make `char` casting type safe.
The serialization of `CSubNet` is changed to serialize a `bool` directly rather than though `FLATDATA`. This makes the serialization independent of the size of the bool type (and will use 1 byte everywhere).
This is a small change taken from #10785.
Tree-SHA512: a41f61ca5fdc2fadb2d0e1702351a58a23841d551f505292a9542602cdb19f90d8944b8df14b872810a56bd201648fa4c0e958f3e9427fe829886284e85b9bfd
adc2586 doc: Refer to witness reserved value as spec. in the BIP (MarcoFalke)
Pull request description:
BIP141 refers to the coinbase's input's witness that consists of a single 32-byte array as "witness reserved value".
This updates the code to follow the BIP
Tree-SHA512: 49c9463519bd11b9ff322eeecd638f7627aa8efdfb869f8549f9a160ff34281e1b5a0b9d83545a692de6f5ff795055292c423403b0f3ce7597e3f32273cf1deb
a192636 -blocksdir: keep blockindex leveldb database in datadir (Jonas Schnelli)
f38e4fd QA: Add -blocksdir test (Jonas Schnelli)
386a6b6 Allow to optional specify the directory for the blocks storage (Jonas Schnelli)
Pull request description:
Since the actual block files taking up more and more space, it may be desirable to have them stored in a different location then the data directory (use case: SSD for chainstate, etc., HD for blocks).
This PR adds a `-blocksdir` option that allows one to keep the blockfiles and the blockindex external from the data directory (instead of creating symlinks).
I fist had an option to keep the blockindex within the datadir, but seems to make no sense since accessing the index will (always) lead to access (r/w) the block files.
Tree-SHA512: f8b9e1a681679eac25076dc30e45e6e12d4b2d9ac4be907cbea928a75af081dbcb0f1dd3e97169ab975f73d0bd15824c00c2a34638f3b284b39017171fce2409
1f45e21 scripted-diff: Convert 11 enums into scoped enums (C++11) (practicalswift)
Pull request description:
Rationale (from Bjarne Stroustrup's ["C++11 FAQ"](http://www.stroustrup.com/C++11FAQ.html#enum)):
>
> The enum classes ("new enums", "strong enums") address three problems with traditional C++ enumerations:
>
> * conventional enums implicitly convert to int, causing errors when someone does not want an enumeration to act as an integer.
> * conventional enums export their enumerators to the surrounding scope, causing name clashes.
> * the underlying type of an enum cannot be specified, causing confusion, compatibility problems, and makes forward declaration impossible.
>
> The new enums are "enum class" because they combine aspects of traditional enumerations (names values) with aspects of classes (scoped members and absence of conversions).
Tree-SHA512: 9656e1cf4c3cabd4378c7a38d0c2eaf79e4a54d204a3c5762330840e55ee7e141e188a3efb2b4daf0ef3110bbaff80d8b9253abf2a9b015cdc4d60b49ac2b914
Support is added to serialize arrays of type char or unsigned char directly,
without any wrappers. All invocations of the FLATDATA wrappers that are
obsoleted by this are removed.
This includes a patch by Russell Yanofsky to make char casting type safe.
The serialization of CSubNet is changed to serialize a bool directly rather
than though FLATDATA. This makes the serialization independent of the size
of the bool type (and will use 1 byte everywhere).
f98b54352 Only call NotifyBlockTip when the active chain changes (James O'Beirne)
152b7fb25 [tests] Add a (failing) test for waitforblockheight (James O'Beirne)
Pull request description:
This is a subset of the more controversial https://github.com/bitcoin/bitcoin/pull/12407, but this also adds a test demonstrating the bug.
In InvalidateBlock, we're calling NotifyBlockTip with the now-invalid block's prev regardless of what chain the ancestor block is on. This could create numerous issues, but it at least screws up `waitforblockheight` (or anything else relying on `rpc/blockchain.cpp:latestblock`) when InvalidateBlock is called on a block not in chainActive, which can happen via RPC.
Only call NotifyBlockTip when the block being marked invalid is on the active chain.
Tree-SHA512: 9a54fe5e8c7eb489daf5df4483c0986129e871e2ca931a456ba869ecb5d5a8d4f7bd27ccc9e711e9292c9ed79ddef896c85d0e81fc76883503e327995b0e914f
92fabcd44 Add LookupBlockIndex function (João Barbosa)
43a32b739 Add missing cs_lock in CreateWalletFromFile (João Barbosa)
f814a3e8f Fix cs_main lock in LoadExternalBlockFile (João Barbosa)
c651df8b3 Lock cs_main while loading block index in AppInitMain (João Barbosa)
02de6a6bc Assert cs_main is held when accessing mapBlockIndex (João Barbosa)
Pull request description:
Replace all `mapBlockIndex` lookups with the new `LookupBlockIndex()`. In some cases it avoids a second lookup.
Tree-SHA512: ca31118f028a19721f2191d86f2dd398144d04df345694575a64aeb293be2f85785201480c3c578a0ec99690516205708558c0fd4168b09313378fd4e60a8412
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
5b8b38775 Fix overly eager BIP30 bypass (Alex Morcos)
Pull request description:
In #6931 we introduced a possible consensus breaking change by misunderstanding how completely BIP 34 obviated the need for BIP 30. Unfixed, this could break consensus after block height about 1.9M. Explained in code comment.
h/t @sdaftuar
Tree-SHA512: 8f798c3f203432fd4ae1c1c08bd6967b4a5ec2064ed5f6a7dcf3bff34ea830952838dd4ff70d70b5080cf4644f601e5526b60456c08f43789e4aae05621d9d6b
9c5a4a6ed Stop special-casing phashBlock handling in validation for TBV (Matt Corallo)
Pull request description:
There is no reason to do this, really, we already have "ignore PoW" flags. Motivated by https://github.com/bitcoin/bitcoin/pull/11739#discussion_r155841721
Tree-SHA512: 37cb1ae5b11c9e8ed7a679bb07ad3b119a2a014744b26d197d67ba21beb19fe6815271df935e40f7c7bd5f2e4d7ae4dad7bd4d00fa230a8d789f37e9de31a769
The call to CheckBlock() in ConnectBlock() is redundant with calls to it
prior to storing a block on disk. If CheckBlock() fails with an error
indicating the block is potentially corrupted, then shut down
immediately, as this is an indication that the node is experiencing
hardware issues. (If we didn't shut down, we could go into an infinite
loop trying to reconnect this same bad block, as we're not setting the
block's status to FAILED in the case where there is potential
corruption.)
If CheckBlock() fails for some other reason, we'll end up flagging this
block as bad (perhaps some prior software version "let a bad block in",
as the comment indicates), and not trying to connect it again, so this
case should be properly handled.
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
Previously, if `invalidateblock` was called on a block in a branch,
NotifyBlockTip would be called on that block's predecessor, creating an
incorrect `rpc/blockchain.cpp:latestblock` value.
Only call NotifyBlockTip if the chain being modified is activeChain.
bb00c95 Consistently use FormatStateMessage in RPC error output (Ben Woosley)
8b8a1c4 Add test for 'mempool min fee not met' rpc error (Ben Woosley)
c04e0f6 Fix 'mempool min fee not met' debug output (Ben Woosley)
Pull request description:
Output the value that is tested, rather than the unmodified fee value.
Prompted by looking into: #11955
Tree-SHA512: fc0bad47d4af375d208f657a6ccbad6ef7f4e2989ae2ce1171226c22fa92847494a2c55cca687bd5a1548663ed3313569bcc31c00d53c0c193a1b865dd8a7657
004f999 boost: drop boost threads for [alert|block|wallet]notify (Cory Fields)
0827267 boost: drop boost threads from torcontrol (Cory Fields)
ba91724 boost: remove useless threadGroup parameter from Discover (Cory Fields)
f26866b boost: drop boost threads for upnp (Cory Fields)
Pull request description:
This doesn't completely get rid of boost::thread, but this batch should be easy to review, and leaves us with only threadGroup (scheduler + scriptcheck) remaining.
Note to reviewers: The upnp diff changes a bunch of whitespace, it's much more clear with 'git diff -w'
Tree-SHA512: 5a356798d0785f93ed143d1f0afafe890bc82f0d470bc969473da2d2aa78bcb9b096f7ba11b92564d546fb447d4bd0d347e7842994ea0170aafd53fda7e0a66e
02fc886 Add braces to meet code style on line-after-the-one-changed. (Matt Corallo)
85aa839 Hold mempool.cs for the duration of ATMP. (Matt Corallo)
Pull request description:
This resolves an issue where getrawmempool() can race mempool
notification signals. Intuitively we use mempool.cs as a "read
lock" on the mempool with cs_main being the write lock, so holding
the read lock intermittently while doing write operations is
somewhat strange.
This also avoids the introduction of cs_main in getrawmempool()
which reviewers objected to in the previous fix in #12273
Tree-SHA512: 29464b9ca3890010ae13b7dc1c53487cc2bc9c3cf3d32a14cb09c8aa33848f57959d8991ea096beebcfb72f062e4e1962f104aefe4252c7db87633bbfe4ab317
dd2de47 Fix fast-shutdown crash if genesis block was not loaded (Matt Corallo)
1c9394a Fix fast-shutdown hang on ThreadImport+GenesisWait (Matt Corallo)
Pull request description:
The second commit is a much simpler alternative fix for the issue fixed in #12349. To test I made ShutdownRequested() always StartShutdown() after a certain number of calls, which turned up one other hang, fixed in the first commit.
Tree-SHA512: 86bde6ac4b8b4e2cb99fff87dafeed02c0d9514acee6d94455637fb2da9ffc274b5ad31b0a6b9f5bd7b700ae35395f28ddb14ffc65ddda3619aa28df28a5607d
9ad6746ccd Use static_cast instead of C-style casts for non-fundamental types (practicalswift)
Pull request description:
A C-style cast is equivalent to try casting in the following order:
1. `const_cast(...)`
2. `static_cast(...)`
3. `const_cast(static_cast(...))`
4. `reinterpret_cast(...)`
5. `const_cast(reinterpret_cast(...))`
By using `static_cast<T>(...)` explicitly we avoid the possibility of an unintentional and dangerous `reinterpret_cast`. Furthermore `static_cast<T>(...)` allows for easier grepping of casts.
For a more thorough discussion, see ["ES.49: If you must use a cast, use a named cast"](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#es49-if-you-must-use-a-cast-use-a-named-cast) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: bd6349b7ea157da93a47b8cf238932af5dff84731374ccfd69b9f732fabdad1f9b1cdfca67497040f14eaa85346391404f4c0495e22c467f26ca883cd2de4d3c
If the ShutdownRequested() check at the top of ActivateBestChain()
returns false during initial genesis block load we will fail an
assertion in UTXO DB flush as the best block hash IsNull(). To work
around this, we move the check until after one round of
ActivateBestChainStep(), ensuring the genesis block gets connected.
This resolves an issue where getrawmempool() can race mempool
notification signals. Intuitively we use mempool.cs as a "read
lock" on the mempool with cs_main being the write lock, so holding
the read lock intermittently while doing write operations is
somewhat strange.
This also avoids the introduction of cs_main in getrawmempool()
which reviewers objected to in the previous fix in #12273
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
22fddde Avoid calling GetSerializeSize on each tx in a block if !fTxIndex (Matt Corallo)
2862aca Move some additional variables into CChainState private (Matt Corallo)
fd4d80a Create initial CChainState to hold chain state information (Matt Corallo)
e104f0f Move block writing out of AcceptBlock (Matt Corallo)
50701ba Move txindex/undo data disk location stuff out of ConnectBlock (Matt Corallo)
93a34cf Make DisconnectBlock unaware of where undo data resides on disk (Matt Corallo)
Pull request description:
CChainState should eventually, essentially, be our exposed "libconsensus", but we're probably a few releases away, so the real goal is to clarify our internal interfaces. The main split was a big step, but validation.cpp is still a somewhat ranomly-mixed bag of functions that are pure functions which validate inputs (which should probably either merge with their callers or move into another file in consensus/), read/write data from disk, manipulate our current chain state (which moves into CChainState), and do mempool transaction validation.
Obviously this is only a small step, but some effort is made to clean up what functions the functions in CChainState call, and obviously as things are added its easy to keep clear "CChainState::* cannot call anything except via callbacks through CValidationInterface, pure functions, or disk read/write things". Right now there are some glaring violations in mempool callbacks, and general flushing logic needs cleaning up (FlushStateToDisk maybe shouldnt be called, and there should be an API towards setDirtyBlockIndex, but I'll leave that for after @sipa's current changesets land).
Tree-SHA512: 69b8ec191b36b19c9492b4dee74c8057621fb6ec98ad219e8da0b2ed5c3ad711b10b5af9ff1117e8807ccf88918eeeab573be8448baecc9a59f099c53095985b
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
9d811dc Document partial validation in ConnectBlock() (Suhas Daftuar)
Pull request description:
`ConnectBlock()` relies on validation that happens in `ContextualCheckBlock()` and
`ContextualCheckBlockHeader()`. This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
Tree-SHA512: 36a252af2221b0e5d5d6f8d5f8b16f8b566ca0db2d56242130a5523302c8757599ac234594a6a946c1689b260d18a32c2c7f8c3831304e78b9832e2ce5ac435a
ConnectBlock() relies on validation that happens in ContextualCheckBlock() and
ContextualCheckBlockHeader(). This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
d61845818 Have SegWit active by default (Pieter Wuille)
4bd89210a Unit tests for always-active versionbits. (Anthony Towns)
d07ee77ab Always-active versionbits support (Pieter Wuille)
18e071841 [consensus] Pin P2SH activation to block 173805 on mainnet (John Newbery)
526023aa7 Improve handling of BIP9Deployment limits (Anthony Towns)
Pull request description:
Most tests shouldn't have to deal with the now-historical SegWit activation transition (and other deployments, but SegWit is certainly the hardest one to accomodate).
This PR makes a versionbits starttime of -1 equal to "always active", and enables it by default for SegWit on regtest. Individual tests can override this by using the existing `-vbparams` option.
A few unit tests and functional tests are adapted to indeed override vbparams, as they specifically test the transition.
This is in preparation for wallet SegWit support, but I thought having earlier eyes on it would be useful.
Tree-SHA512: 3f07a7b41cf46476e6c7a5c43244e68c9f41d223482cedaa4c02a3a7b7cd0e90cbd06b84a1f3704620559636a2268f5767d4c52d09c1b354945737046f618fe5
f3d4adf Make p2p-acceptablock not an extended test (Matt Corallo)
00dcda6 [qa] test that invalid blocks on an invalid chain get a disconnect (Matt Corallo)
015a525 Reject headers building on invalid chains by tracking invalidity (Matt Corallo)
932f118 Accept unrequested blocks with work equal to our tip (Matt Corallo)
3d9c70c Stop always storing blocks from whitelisted peers (Matt Corallo)
3b4ac43 Rewrite p2p-acceptblock in preparation for slight behavior changes (Matt Corallo)
Pull request description:
@sdaftuar pointed out that the version in #11487 was somewhat DoS-able as someone could feed you a valid chain that forked off the the last checkpoint block and force you to do lots of work just walking backwards across blocks for each new block they gave you. We came up with a few proposals but settled on the one implemented here as likely the simplest without obvious DoS issues. It uses our existing on-load mapBlockIndex walk to make sure everything that descends from an invalid block is marked as such, and then simply caches blocks which we attempted to connect but which were found to be invalid. To avoid DoS issues during IBD, this will need to depend on #11458.
Includes tests from #11487.
Tree-SHA512: 46aff8332908e122dae72ceb5fe8cd241902c2281a87f58a5fb486bf69d46458d84a096fdcb5f3e8e07fbcf7466232b10c429f4d67855425f11b38ac0bf612e1
This tracks the set of all known invalid-themselves blocks (ie
blocks which we attempted to connect but which were found to be
invalid). This is used to cheaply check if new headers build on an
invalid chain.
While we're at it we also resolve an edge-case in invalidateblock
on pruned nodes which results in them needing a reindex if they
fail to reorg.
This is a simple change that makes our accept requirements the
same as our request requirements, (ever so slightly) further
decoupling our consensus logic from our FindNextBlocksToDownload
logic in net_processing.
A peer could try to waste our resources by sending us unrequested blocks with
low work, eg to fill up our disk. Since
e2652002b6 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip. This commit fixes that behavior.
258d33b41 [mempool] Mark unaccepted txs present in mempool as 'already there'. (Karl-Johan Alm)
Pull request description:
I was investigating the reasons for failed imports in mempool and noticed that `LoadMempool()` and `pwallet->postInitProcess()` (for all wallets) are executed concurrently. The wallet will end up importing transactions that `LoadMempool()` later tries to import; the latter will fail due to the tx already being in the mempool.
This PR changes the log message, adding an additional "already there" entry. For transactions not accepted into mempool, a check if they are in the mempool is done first, and if found, they are counted as 'already there', otherwise counted as 'failed'.
Also slight rewording for consistency (successes, failed, expired, ... -> succeeded, failed, expired).
Tree-SHA512: 1a6134a25260917f2768365e0dfd8b278fe3f8287cab38bb028b7de3d517718a2d37696186dc7a23ceab338cc755fbbe7d45358ee94e573610fddd2a0620d6e5
This runs Block{Connected,Disconnected}, SetBestChain, Inventory,
and TransactionAddedToMempool on the background scheduler thread.
Of those, only BlockConnected is used outside of Wallet/ZMQ, and
is used only for orphan transaction removal in net_processing,
something which does not need to be synchronous with anything
else.
This partially reverts #9583, re-enabling some of the gains from
#7946. This does not, however, re-enable the gains achieved by
repeatedly releasing cs_main between each transaction processed.
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
6643b80 Add state message print to AcceptBlock failure message. (Matt Corallo)
Pull request description:
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
This was motivated by #11371 which appears to be exactly such a case, and is not debuggable from the information provided. Not sure how much this would have helped in that case, but it is kinda weird that we can reject a block without ever printing why.
Tree-SHA512: 7a1c2c76080b810212da885c38e091609e409c62918cc326bb36a1096e09b2ae7e26fd4bdaefd79863d2894e2823e463005700a524940f177a59ef09f589b2f1
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
3a131b724 Rename out to m_tx_out in CScriptCheck (Johnson Lau)
e91211878 [Refactor] Combine scriptPubKey and amount as CTxOut in CScriptCheck (Johnson Lau)
Pull request description:
This simplifies CScriptCheck by combining scriptPubKey and amount
Tree-SHA512: 6422363cf5394c6cfefb30c1709db6def63230b809cc7697887e4a2e8c684149208edf91dd139e031b9fe732776b2db59305f77c3cba6f333b11cceb39ef0cc2
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Combine fLimitFree and fOverrideMempoolLimit into a single boolean:
bypass_limits. This is used to indicate that mempool limiting based on feerate
should be bypassed. It is used when readding transactions from a reorg and then
the mempool is trimmed to size after all transactions are added and they can be
evaluated in the context of their descendants. No changes to behavior.
ee4d1493e Drop upgrade-cancel callback registration for a generic "resumeable" (Matt Corallo)
Pull request description:
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "cancelable" boolean, as StartShutdown
is pretty much always what you'll want to use to cancel. Use the
same boolean to allow cancel during initial block verification.
Tree-SHA512: 515817aaa4b9e3e856200e00be9c2d44ecfa2d4f288fe3e02116105fe85de2650c13076ee7e45396ec1ce6ab45e53b0477cddda7cfdee5b3bd0589cb81a4c346
c00199244 Fix potential null dereferences (MeshCollider)
Pull request description:
Picked up by the static analyzer [Facebook Infer](http://fbinfer.com/) which I was playing around with for another research project. Just adding some asserts before dereferencing potentially null pointers.
Tree-SHA512: 9c01dab2d21bce75c7c7ef867236654ab538318a1fb39f96f09cdd2382a05be1a6b2db0a1169a94168864e82ffeae0686a383db6eba799742bdd89c37ac74397
1aa97ee08 Add savemempool RPC (Lawrence Nahum)
467cbbcbf Add return value to DumpMempool (Lawrence Nahum)
Pull request description:
Adds a simple parameterless rpc command to dump the mempool.
Rationale:
Sometimes there can be a crash for whatever reason (bug, power loss, etc) causing the mempool.dat file to not be saved.
This change allows to script/cron the rpc call to have more regular saves to the file as well as cli/ad-hoc.
This should solve issue https://github.com/bitcoin/bitcoin/issues/11086
Tree-SHA512: e856ae9777425a4521279c9b58e69285d8e374790bebefd3284cf91931eac0e456f86224f427a087a01bf70440bf6e439fa02c8a34940eb1046ae473e98b6aaa
On startup, the wallets will start pumping wallet transactions into the mempool in a different thread while LoadMempool() is running.
This will sometimes result in transactions "failing" to be accepted into mempool, but only for the reason that they were already
put there by a wallet. The log message for mempool load would note this as a 'failure' to import, which was misleading; it should
instead mark it as the transaction already being in the mempool.
a473eff [bench] Replace 0.00(000)1 with MICRO/MILLI #defines in validation.cpp. (Karl-Johan Alm)
5f850b0 [bench] Include ms/blk stats in Connect* benchmarks. (Karl-Johan Alm)
Pull request description:
Display the average per block runtime for the various benchmarked times in the block connect functions to give an overview of long(er) term time distribution statistics.
Tree-SHA512: 3d6f24f6b9e3dbb448a647e2cda8e7b90ad6a16d4821f49f426a8e1ebc3ce5a0cf0a8cde82213e293affba441615702dfe50822c8c818e282af03bfe383d83e0
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "resumeable" boolean, which is used to
inform the user if the action will be resumed, but cancel is always
allowed by just calling StartShutdown().
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
85c82b5 Avoid masking of difficulty adjustment errors by checkpoints (Pieter Wuille)
Pull request description:
Currently difficulty adjustment violations are not reported for chains that branch off before the last checkpoint. Change this by moving the checkpoint check after the difficulty check.
Tree-SHA512: 33666f2c3459151b28c42041a463779e6df18f61d3dd5b1879a0af4e5b199ef74d1e33e06af68bebfdfb211569ad5fb56556bfebe9d63b5688d910ea211b839a
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
Currently difficulty adjustment violations are not reported for
chains that branch off before the last checkpoint. Change this
by moving the checkpoint check after the difficulty check.
c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
RewindBlockIndex works over both chainActive - disconnecting blocks
from the tip that need witness verification - and mapBlockIndex -
requiring redownload of blocks missing witness data.
It should never have been the case that the second half is skipped
if we're about to run -reindex-chainstate.
This gives LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
This also calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
095b917 Avoid using sizes on non-fixed-width types to derive protocol constants. (Gregory Maxwell)
Pull request description:
Thanks to awemany for pointing this out.
This replaces #10172 which appears to be abandoned, but uses the constants as requested on that PR.
Tree-SHA512: 032c0d75b3aaf807a7d0c7fb8ff5515acc45ad58bd00fe81413f900fe02bad900534a970403b9bb568e132c9eddea6043e958daf625e8acc84375bd41ee2e2ef
d9d1bd3 nCheckDepth chain height fix (romanornr)
Pull request description:
````
if (nCheckDepth <= 0)
nCheckDepth = 1000000000; // suffices until the year 19000
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
These lines confuse me.
Correct me if I am wrong, but we can't check any more blocks than we have right?
If someone requests <= 0 it get set it into some huge number and then immediately limit it to the chain height in the following statement.
````
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
when using ````--checkblocks=Z```` When Z is ````0```` or any other negative number, it will check all blocks.
I think it should be changed to this maybe.
````
if (nCheckDepth <= 0 || nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
Which gets rid of that huge number which is confusing for any other altcoins that have a different block time.
Tree-SHA512: 8ee0ae5f33b399fa74dc16926709694ccfe1fc8a043cba2f5d00884220ac1b9b13f2df4588041f4133be634e5c7b14f4eebe24294028dafe91581a97dbe627f3
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
18bacec6c Make check to distinguish between orphan txs and old txs more efficient. (Alex Morcos)
Tree-SHA512: b6b4bad89aa561975dce7b68b2fdad5623af5ebcb9c38fd6a72b5f6d0544ed441df4865591ac018f7ae0df9b5c60820cb4d9e55664f5667c9268458df70fd554
69a4339ef missing white space in function arg (Lawrence Nahum)
Pull request description:
Tree-SHA512: 94d832eca0b5429cf48c7c1d4489942b53182c5b7ad9f24264867e7631301173c23a48f7b2e8fd22ff1b3137bafacb3f9d4320f4df235668c9096aaefff7afe8
