This will result in many more calls to CheckBlockIndex when
connecting a list of headers (eg in ::HEADERS messages processing)
but its only enabled in debug mode, and that should mostly just be
during IBD, so it should be OK.
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
This splits the output comparison for `bitcoin-tx` into two steps:
- First, check for data mismatch, parsing the data as json or hex
depending on the extension of the output file
- Then, check if the literal string matches
For either of these cases give a different error.
This prevents wild goose chases when e.g. a trailing space doesn't match
exactly, and makes sure that both test output and examples are valid
data of the purported format.
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
```
getmemoryinfo
Returns an object containing information about memory usage.
Result:
{
"locked": { (json object) Information about locked memory manager
"used": xxxxx, (numeric) Number of bytes used
"free": xxxxx, (numeric) Number of bytes available in current arenas
"total": xxxxxxx, (numeric) Total number of bytes managed
"locked": xxxxxx, (numeric) Amount of bytes that succeeded locking. If this number is smaller than total, locking pages failed at some point and key data could be swapped to disk.
}
}
Examples:
> bitcoin-cli getmemoryinfo
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getmemoryinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
```
Add a pool for locked memory chunks, replacing LockedPageManager.
This is something I've been wanting to do for a long time. The current
approach of locking objects where they happen to be on the stack or heap
in-place causes a lot of mlock/munlock system call overhead, slowing
down any handling of keys.
Also locked memory is a limited resource on many operating systems (and
using a lot of it bogs down the system), so the previous approach of
locking every page that may contain any key information (but also other
information) is wasteful.
This change is needed to prevent sync_blocks timeouts in the mempool_reorg
test after the sync_blocks update in the upcoming commit
"[qa] Change sync_blocks to pick smarter maxheight".
This change was initially suggested by Suhas Daftuar <sdaftuar@chaincode.com>
in https://github.com/bitcoin/bitcoin/pull/8680#r78209060
0334430 Add some missing includes (Pieter Wuille)
4100499 Return shared_ptr<CTransaction> from mempool removes (Pieter Wuille)
51f2783 Make removed and conflicted arguments optional to remove (Pieter Wuille)
f48211b Bypass removeRecursive in removeForReorg (Pieter Wuille)
nMaxInbound might very well be 0 or -1, if the user prefers to keep
a small number of maxconnections.
Note: nMaxInbound of -1 means that the user set maxconnections
to 8 or less, but we still want to keep an additional slot for
the feeler connection.
Add getNetworkActive()/setNetworkActive() method to client model.
Send network active status through NotifyNetworkActiveChanged.
Indicate in tool tip of gui status bar network indicator whether network activity is disabled.
Indicate in debug window whether network activity is disabled and add button to allow user to toggle network activity state.
Added the function SetNetworkActive() which when called with argument set to false disconnects all nodes and sets the flag fNetworkActive to false. As long as this flag is false no new connections are attempted and no incoming connections are accepted. Network activity is reenabled by calling the function with argument true.
Note that this is not a major issue as, in order for the missing
lock to cause issues, you have to receive a GETBLOCKTXN message
while reindexing, adding a block header via RPC, etc, which results
in either a table rehash or an insert into the bucket which you are
currently looking at.
3154d6e [Qt] use NotifyHeaderTip's height and date for the progress update (Jonas Schnelli)
0a261b6 Use pindexBestHeader instead of setBlockIndexCandidates for NotifyHeaderTip() (Jonas Schnelli)
Makes it an error to use flags that have not been defined
on the libconsensus API.
There has been some confusion as to what pass to libconsensus, and
(combined with mention in the release notes) this should clear it up.
Using undocumented flags is a risk because their meaning,
and what combinations are allowed, changes from release to release.
E.g. it is no longer possible to pass (CLEANSTACK | P2SH) without
running into an assertion after the segwit changes.
There were discrepancies between usage of "block chain" and "blockchain", I've changed them to the latter. The reason for this was that Wikipedia when describing this data structure writes "A blockchain — *originally block chain*", so it seemed the more appropriate term.
178cd88 Qt/splash: Specifically keep track of which wallet(s) we are connected to for later disconnecting (Luke Dashjr)
1880aeb Qt: Get the private key for signing messages via WalletModel (Luke Dashjr)
Replace these with vectors allocated from the secure allocator.
This avoids mlock syscall churn on stack pages, as well as makes
it possible to get rid of these functions.
Please review this commit and the previous one carefully that
no `sizeof(vectortype)` remains in the memcpys and memcmps usage
(ick!), and `.data()` or `&vec[x]` is used as appropriate instead of
&vec.
Change CCrypter to use vectors with secure allocator instead of buffers
on in the object itself which will end up on the stack. This avoids
having to call LockedPageManager to lock stack memory pages to prevent the
memory from being swapped to disk. This is wasteful.
4630479 Make dnsseed's definition of acute need include relevant services. (Gregory Maxwell)
9583477 Be more aggressive in connecting to peers with relevant services. (Gregory Maxwell)
We normally prefer to connect to peers offering the relevant services.
If we're not connected to enough peers with relevant services, we
probably don't know about them and could use dnsseed's help.
a9aec5c Use BlockChecked signal to send reject messages from mapBlockSource (Matt Corallo)
7565e03 Remove SyncWithWallets wrapper function (Matt Corallo)
12ee1fe Always call UpdatedBlockTip, even if blocks were only disconnected (Matt Corallo)
f5efa28 Remove CConnman parameter from ProcessNewBlock/ActivateBestChain (Matt Corallo)
fef1010 Use CValidationInterface from chain logic to notify peer logic (Matt Corallo)
aefcb7b Move net-processing logic definitions together in main.h (Matt Corallo)
0278fb5 Remove duplicate nBlocksEstimate cmp (we already checked IsIBD()) (Matt Corallo)
87e7d72 Make validationinterface.UpdatedBlockTip more verbose (Matt Corallo)
The new benchmarks exercise script validation, CCoinsDBView caching,
mempool eviction, and wallet coin selection code.
All of the benchmarks added here are extremely simple and don't
necessarily mirror common real world conditions or interesting
performance edge cases. Details about how specific benchmarks can be
improved are noted in comments.
Github-Issue: #7883
3ac6de0 Align constant names for maximum compact block / blocktxn depth (Pieter Wuille)
b2e93a3 Add cmpctblock to debug help list (instagibbs)
fe998e9 More agressively filter compact block requests (Matt Corallo)
02a337d Dont remove a "preferred" cmpctblock peer if they provide a block (Matt Corallo)
Only allow skipping relevant services until there are four outbound
connections up.
This avoids quickly filling up with peers lacking the relevant
services when addrman has few or none of them.
67d6ee1 remove redundant tests in p2p-segwit.py (Johnson Lau)
9260085 test segwit uncompressed key fixes (Johnson Lau)
248f3a7 Fix ismine and addwitnessaddress: no uncompressed keys in segwit (Pieter Wuille)
b811124 [qa] Add tests for uncompressed pubkeys in segwit (Suhas Daftuar)
9f0397a Make test framework produce lowS signatures (Johnson Lau)
4c0c25a Require compressed keys in segwit as policy and disable signing with uncompressed keys for segwit scripts (Johnson Lau)
3ade2f6 Add standard limits for P2WSH with tests (Johnson Lau)
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
1df3111 protocol.h: Make enums in GetDataMsg concrete values (Wladimir J. van der Laan)
2c09a52 protocol.h: Move MESSAGE_START_SIZE into CMessageHeader (Wladimir J. van der Laan)
f9bd92d version.h: s/shord/short/ in comment (Wladimir J. van der Laan)
27acfc1 [qa] Update p2p-compactblocks.py for compactblocks v2 (Suhas Daftuar)
422fac6 [qa] Add support for compactblocks v2 to mininode (Suhas Daftuar)
f5b9b8f [qa] Fix bug in mininode witness deserialization (Suhas Daftuar)
6aa28ab Use cmpctblock type 2 for segwit-enabled transfer (Pieter Wuille)
be7555f Fix overly-prescriptive p2p-segwit test for new fetch logic (Matt Corallo)
06128da Make GetFetchFlags always request witness objects from witness peers (Matt Corallo)
This concretizes the numbers and adds a comment to make it clear that
these numbers are fixed by the protocol, and may avoid people forgetting
to claim numbers in the future (e.g. issue #8500).
Also gets rid of a weird unused `MSG_TYPE_MAX` in the middle of the
enumeration (thanks @paveljanik for noticing).
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
This fixes a bug where we might (in exceedingly rare circumstances)
accidentally ban a node for sending us the first (potentially few)
segwit blocks in non-segwit mode.
* Minor formatting such as adjusting links
* Move sections of `doc/multiwallet-qt.md` to the source code and delete
the file, as it is outdated
* Fix typo in the release notes
* Amend release process to mention update of BLOCK_CHAIN_SIZE
f00705a serialize: Deprecate `begin_ptr` / `end_ptr` (Wladimir J. van der Laan)
47314e6 prevector: add C++11-like data() method (Wladimir J. van der Laan)
Implement `begin_ptr` and `end_ptr` in terms of C++11 code,
and add a comment that they are deprecated.
Follow-up to developer notes update in 654a211622.
75ead758 turned these into crashes in the event of a handshake failure, most
notably when a peer does not offer the expected services.
There are likely other cases that these assertions will find as well.
Base64 contains '/', and the '/' character in credentials is problematic
for AuthServiceProxy which represents the RPC endpoint as an URI with
user and password embedded.
Closes#8399.
305087b net: Hardcode protocol sizes and use fixed-size types (Wladimir J. van der Laan)
41e58fa net: Consistent checksum handling (Wladimir J. van der Laan)
0c4e6ce Add MIT license to build-aux/m4 scripts (Luke Dashjr)
3f8a5d8 Trivial: build-aux/m4/l_atomic: Fix typo (Luke Dashjr)
3b4b6dc Add MIT license to autogen.sh and share/genbuild.sh (Luke Dashjr)
f4dffdd Add MIT license to Makefiles (Luke Dashjr)
In principle, the checksums of P2P packets are simply 4-byte blobs which
are the first four bytes of SHA256(SHA256(payload)).
Currently they are handled as little-endian 32-bit integers half of the
time, as blobs the other half, sometimes copying the one to the other,
resulting in somewhat confused code.
This PR changes the handling to be consistent both at packet creation
and receiving, making it (I think) easier to understand.
Simplified version of #8278. Assumes that every OS that (a) is supported
by Bitcoin Core (b) supports daemonization has the `daemon()` function
in its C library.
- Removes the fallback path for operating systems that support
daemonization but not `daemon()`. This prevents never-exercised code from
ending up in the repository (see discussion here:
https://github.com/bitcoin/bitcoin/pull/8278#issuecomment-242704745).
- Removes the windows-specific path. Windows doesn't support `daemon()`,
so it don't support daemonization there, automatically.
Original code by Matthew King, adapted by Wladimir van der Laan.
08827df [Qt] modalinfolayer: removed unused comments, renamed signal, code style overhaul (Jonas Schnelli)
d8b062e [Qt] only update "amount of blocks left" when the header chain is in-sync (Jonas Schnelli)
e3245b4 [Qt] add out-of-sync modal info layer (Jonas Schnelli)
e47052f [Qt] ClientModel add method to get the height of the header chain (Jonas Schnelli)
a001f18 [Qt] Always pass the numBlocksChanged signal for headers tip changed (Jonas Schnelli)
bd44a04 [Qt] make Out-Of-Sync warning icon clickable (Jonas Schnelli)
0904c3c [Refactor] refactor function that forms human readable text out of a timeoffset (Jonas Schnelli)
2ca6b9d Remove last reference to CWalletDB from accounting_tests.cpp (Patrick Strateman)
02e2a81 Remove pwalletdb parameter from CWallet::AddAccountingEntry (Patrick Strateman)
d2e678d Add CWallet::ReorderTransactions and use in accounting_tests.cpp (Patrick Strateman)
59adc86 Add CWallet::ListAccountCreditDebit (Patrick Strateman)
After #8594 the addrFrom sent by a node is not used anymore at all,
so don't bother sending it.
Also mitigates the privacy issue in (#8616). It doesn't completely solve
the issue as GetLocalAddress is also called in AdvertiseLocal, but at
least when advertising addresses it stands out less as *our* address.
This was broken by 63cafa6329.
Note that while this fixes the settings, it doesn't fix the actual usage of
-maxuploadtarget completely, as there is currently a bug in the
nOptimisticBytesWritten accounting that causes a delayed response if the target
is reached. That bug will be addressed separately.
In the case of (for example) an already-running bitcoind, the shutdown sequence
begins before CConnman has been created, leading to a null-pointer dereference
when g_connman->Stop() is called.
Instead, Just let the CConnman dtor take care of stopping.
86726d8 Rename `-optintofullrbf` option to `-walletrbf` (Wladimir J. van der Laan)
05fa823 wallet: Add BIP125 comment for MAXINT-1/-2 behavior (Wladimir J. van der Laan)
152f45b Add option to opt into full-RBF when sending funds (Peter Todd)
An example of where this might be useful is allowing a node to connect blocksonly during IBD but then becoming a full-node once caught up with the latest block. This might also even want to be the default behaviour since during IBD most TXs appear to be orphans, and are routinely dropped (for example when a node disconnects). Therefore, this can waste a lot of bandwidth.
Additionally, another pull could be written to stop relaying of TXs to nodes that are clearly far behind the latest block and are running a node that doesn't store many orphan TXs, such as recent versions of Bitcoin Core.
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
