Commit graph

749 commits

Author SHA1 Message Date
fanquake c469ecf22e
net: Remove unused interrupt from SendMessages 2018-07-08 21:27:12 +08:00
practicalswift c3f34d06be Make it clear which functions that are intended to be translation unit local
Do not share functions that are meant to be translation unit local with
other translation units. Use internal linkage for those consistently.
2018-05-03 21:47:40 +02:00
Wladimir J. van der Laan ff2ad2d569 Add missing newlines to LogPrint debug logging
The linter only checked `LogPrintf`, not `LogPrint`.
Fix the remaining cases.
2018-05-02 15:14:04 +02:00
Thomas Snider 2c084a6609 net: Minor accumulated cleanups 2018-04-16 13:24:14 -07:00
okayplanet d1b828bb46
correcting the array name from pnSeeds6 to pnSeed6 2018-04-14 16:19:40 -07:00
Wladimir J. van der Laan 23e7fe8be8
Merge #12569: net: Increase signal-to-noise ratio in debug.log by adjusting log level when logging failed non-manual connect():s
cba2800 Increase signal-to-noise ratio in debug.log by adjusting log level when logging failed non-manual connect():s (practicalswift)

Pull request description:

  Increase signal-to-noise ratio in `debug.log` by adjusting log level when logging failed non-manual `connect()`:s.

  Before this patch:

  ```
  $ src/bitcoind -printtoconsole
  …
  2018-02-28 18:42:51 UpdateTip: new best=0000000000005448b10a219683d34b770a28044e1cc421032dea1a79ff548948 height=1286903 version=0x20000000 log2_work=69.791313 tx=17408546 date='2018-02-28 18:42:46' progress=1.000000 cache=0.0MiB(173txo)
  2018-02-28 18:37:52 connect() 10.11.21.34:18333 failed after select(): Connection refused (111)
  2018-02-28 18:43:22 connect() to 10.11.43.14:18333 failed after select(): Network is unreachable (101)
  2018-02-28 18:44:49 UpdateTip: new best=000000000000029a521ff2803e1441b09413b876accff5084a4cccf7747d798b height=1286904 version=0x20000000 log2_work=69.791345 tx=17408559 date='2018-02-28 18:44:51' progress=1.000000 cache=0.1MiB(502txo)
  2018-02-28 18:46:54 connect() to [2001:0:9d38:78ff:1234🔢1234:1234]:18333 failed: Network is unreachable (101)
  2018-02-28 18:48:56 connect() to [2001:0:9d38:6aff:1234🔢1234:1234]:18333 failed: Network is unreachable (101)
  2018-02-28 18:49:11 UpdateTip: new best=000000000000000206b79eb235e5dd907b6369de0e5d764330bf40ec0d460311 height=1286905 version=0x20000000 log2_work=69.791377 tx=17408577 date='2018-02-28 18:49:12' progress=1.000000 cache=1.0MiB(5245txo)
  ```

  After this patch:

  ```
  $ src/bitcoind -printtoconsole
  …
  2018-02-28 18:42:51 UpdateTip: new best=0000000000005448b10a219683d34b770a28044e1cc421032dea1a79ff548948 height=1286903 version=0x20000000 log2_work=69.791313 tx=17408546 date='2018-02-28 18:42:46' progress=1.000000 cache=0.0MiB(173txo)
  2018-02-28 18:44:49 UpdateTip: new best=000000000000029a521ff2803e1441b09413b876accff5084a4cccf7747d798b height=1286904 version=0x20000000 log2_work=69.791345 tx=17408559 date='2018-02-28 18:44:51' progress=1.000000 cache=0.1MiB(502txo)
  2018-02-28 18:49:11 UpdateTip: new best=000000000000000206b79eb235e5dd907b6369de0e5d764330bf40ec0d460311 height=1286905 version=0x20000000 log2_work=69.791377 tx=17408577 date='2018-02-28 18:49:12' progress=1.000000 cache=1.0MiB(5245txo)
  ```

  Please note that "manual `connect()`:s" (invoked via `-connect`, `-proxy` or `addnode`) are still reported at the default log level as these messages are likely to be relevant to end-users:

  ```
  $ src/bitcoind -printtoconsole -connect=127.0.0.1:1234
  …
  2018-02-28 18:31:13 connect() to 127.0.0.1:1234 failed after select(): Connection refused (111)

  $ src/bitcoind -printtoconsole -proxy=127.0.0.1:1234
  …
  2018-02-28 18:32:32 connect() to 127.0.0.1:1234 failed after select(): Connection refused (111)

  $ src/bitcoind -printtoconsole &
  $ src/bitcoin-cli addnode 127.0.0.1:1234 onetry
  …
  2018-02-28 18:33:40 connect() to 127.0.0.1:1234 failed after select(): Connection refused (111)
  ```

Tree-SHA512: 92e3c1e4b54ce8ccdd7ec31de147c8505710cd799ceb2bbc8576a086709967802403c9184df364b3cfa59bd98859f6ac8feb27fb09b9324194c6c47a042fc6d3
2018-04-13 19:25:18 +02:00
practicalswift 280023f31d Remove duplicate includes 2018-04-09 09:18:49 +02:00
Wladimir J. van der Laan bd59c4395c
Merge #12859: Bugfix: Include <memory> for std::unique_ptr
a5bca13 Bugfix: Include <memory> for std::unique_ptr (Luke Dashjr)

Pull request description:

  Not sure why all these includes were missing, but it's breaking builds for some users:

  https://bugs.gentoo.org/show_bug.cgi?id=652142

  (Added to all files with a reference to `std::unique_ptr`)

Tree-SHA512: 8a2c67513ca07b9bb52c34e8a20b15e56f8af2530310d9ee9b0a69694dd05e02e7a3683f14101a2685d457672b56addec591a0bb83900a0eb8e2a43d43200509
2018-04-05 09:31:53 +02:00
Luke Dashjr a5bca13095 Bugfix: Include <memory> for std::unique_ptr 2018-04-02 18:31:52 +00:00
MarcoFalke 4ad3b3c72c
Merge #12716: Fix typos and cleanup in various files
4d9b4256d8 Fix typos (Dimitris Apostolou)

Pull request description:

  Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.

Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
2018-03-21 11:17:43 -04:00
Dimitris Apostolou 4d9b4256d8 Fix typos 2018-03-21 08:34:44 +02:00
Vasil Dimov 8ae413235d
Remove redundant checks for MSG_* from configure.ac
It is redundant to check for the presence of MSG_NOSIGNAL macro in
configure.ac, define HAVE_MSG_NOSIGNAL and then check whether the later
is defined in the source code. Instead we can check directly whether
MSG_NOSIGNAL is defined. Same for MSG_DONTWAIT.

In addition to that, the checks we had in configure.ac produce a
compiler warning about unused variable and thus could fail if
-Werror is present and erroneously proclaim that the macros are
not available.
2018-03-15 20:02:00 +01:00
practicalswift cba2800e8c Increase signal-to-noise ratio in debug.log by adjusting log level when logging failed non-manual connect():s
Before this patch:

```
$ src/bitcoind -printtoconsole
…
2018-02-28 18:42:51 UpdateTip: new best=0000000000005448b10a219683d34b770a28044e1cc421032dea1a79ff548948 height=1286903 version=0x20000000 log2_work=69.791313 tx=17408546 date='2018-02-28 18:42:46' progress=1.000000 cache=0.0MiB(173txo)
2018-02-28T18:37:52Z connect() 10.11.21.34:18333 failed after select(): Connection refused (111)
2018-02-28 18:43:22 connect() to 10.11.43.14:18333 failed after select(): Network is unreachable (101)
2018-02-28 18:44:49 UpdateTip: new best=000000000000029a521ff2803e1441b09413b876accff5084a4cccf7747d798b height=1286904 version=0x20000000 log2_work=69.791345 tx=17408559 date='2018-02-28 18:44:51' progress=1.000000 cache=0.1MiB(502txo)
2018-02-28 18:46:54 connect() to [2001:0:9d38:78ff:1234🔢1234:1234]:18333 failed: Network is unreachable (101)
2018-02-28 18:48:56 connect() to [2001:0:9d38:6aff:1234🔢1234:1234]:18333 failed: Network is unreachable (101)
2018-02-28 18:49:11 UpdateTip: new best=000000000000000206b79eb235e5dd907b6369de0e5d764330bf40ec0d460311 height=1286905 version=0x20000000 log2_work=69.791377 tx=17408577 date='2018-02-28 18:49:12' progress=1.000000 cache=1.0MiB(5245txo)
```

After this patch:

```
$ src/bitcoind -printtoconsole
…
2018-02-28 18:42:51 UpdateTip: new best=0000000000005448b10a219683d34b770a28044e1cc421032dea1a79ff548948 height=1286903 version=0x20000000 log2_work=69.791313 tx=17408546 date='2018-02-28 18:42:46' progress=1.000000 cache=0.0MiB(173txo)
2018-02-28 18:44:49 UpdateTip: new best=000000000000029a521ff2803e1441b09413b876accff5084a4cccf7747d798b height=1286904 version=0x20000000 log2_work=69.791345 tx=17408559 date='2018-02-28 18:44:51' progress=1.000000 cache=0.1MiB(502txo)
2018-02-28 18:49:11 UpdateTip: new best=000000000000000206b79eb235e5dd907b6369de0e5d764330bf40ec0d460311 height=1286905 version=0x20000000 log2_work=69.791377 tx=17408577 date='2018-02-28 18:49:12' progress=1.000000 cache=1.0MiB(5245txo)
```

Please note that "manual connect():s" (invoked via `-connect`, `-proxy` or `addnode`) are still reported as usual:

```
$ src/bitcoind -printtoconsole -connect=10.11.12.13
…
2018-02-28 18:33:13 connect() to 10.11.12.13:18333 failed after select(): Connection refused (111)
$ src/bitcoind -printtoconsole -proxy=10.11.12.13
…
2018-02-28 18:32:32 connect() to 10.11.12.13:9050 failed after select(): Connection refused (111)
$ src/bitcoind -printtoconsole &
$ src/bitcoin-cli addnode "10.11.12.13" onetry
…
2018-02-28 18:34:40 connect() to 10.11.12.13:18333 failed after select(): Connection refused (111)
```
2018-03-11 10:49:04 +01:00
practicalswift a7324bd799 Format timestamps using ISO 8601 formatting (e.g. "2018-02-28T12:34:56Z")
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.

This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
2018-03-09 15:02:01 +01:00
e0 46e7f800bd Limit the number of IPs we use from each DNS seeder
A risk exists where a malicious DNS seeder eclipses a node by returning an enormous number of IP addresses. In this commit we mitigate this risk by limiting the number of IP addresses addrman learns to 256 per DNS seeder.
2018-03-06 18:26:29 -05:00
Wladimir J. van der Laan a36834f10b
Merge #9037: net: Add test-before-evict discipline to addrman
e68172ed9 Add test-before-evict discipline to addrman (Ethan Heilman)

Pull request description:

  This change implement countermeasures 3 (test-before-evict) suggested in our paper: ["Eclipse Attacks on Bitcoin’s Peer-to-Peer Network"](http://cs-people.bu.edu/heilman/eclipse/).
  # Design:

  A collision occurs when an address, addr1, is being moved to the tried table from the new table, but maps to a position in the tried table which already contains an address (addr2). The current behavior is that addr1 would evict addr2 from the tried table.

  This change ensures that during a collision, addr1 is not inserted into tried but instead inserted into a buffer (setTriedCollisions). The to-be-evicted address, addr2, is then tested by [a feeler connection](https://github.com/bitcoin/bitcoin/pull/8282). If addr2 is found to be online, we remove addr1 from the buffer and addr2 is not evicted, on the other hand if addr2 is found be offline it is replaced by addr1.

  An additional small advantage of this change is that, as no more than ten addresses can be in the test buffer at once, and addresses are only cleared one at a time from the test buffer (at 2 minute intervals), thus an attacker is forced to wait at least two minutes to insert a new address into tried after filling up the test buffer. This rate limits an attacker attempting to launch an eclipse attack.
  # Risk mitigation:
  - To prevent this functionality from being used as a DoS vector, we limit the number of addresses which are to be tested to ten. If we have more than ten addresses to test, we drop new addresses being added to tried if they would evict an address. Since the feeler thread only creates one new connection every 2 minutes the additional network overhead is limited.
  - An address in tried gains immunity from tests for 4 hours after it has been tested or successfully connected to.
  # Tests:

  This change includes additional addrman unittests which test this behavior.

  I ran an instance of this change with a much smaller tried table (2 buckets of 64 addresses) so that collisions were much more likely and observed evictions.

  ```
  2016-10-27 07:20:26 Swapping 208.12.64.252:8333 for 68.62.95.247:8333 in tried table
  2016-10-27 07:20:26 Moving 208.12.64.252:8333 to tried
  ```

  I documented tests we ran against similar earlier versions of this change in #6355.
  # Security Benefit

  This is was originally posted in PR #8282 see [this comment for full details](https://github.com/bitcoin/bitcoin/pull/8282#issuecomment-237255215).

  To determine the security benefit of these larger numbers of IPs in the tried table I modeled the attack presented in [Eclipse Attacks on Bitcoin’s Peer-to-Peer Network](https://eprint.iacr.org/2015/263).

  ![attackergraph40000-10-1000short-line](https://cloud.githubusercontent.com/assets/274814/17366828/372af458-595b-11e6-81e5-2c9f97282305.png)

  **Default node:** 595 attacker IPs for ~50% attack success.
  **Default node + test-before-evict:** 620 attacker IPs for ~50% attack success.
  **Feeler node:** 5540 attacker IPs for ~50% attack success.
  **Feeler node + test-before-evict:** 8600 attacker IPs for ~50% attack success.

  The node running feeler connections has 10 times as many online IP addresses in its tried table making an attack 10 times harder (i.e. requiring the an attacker require 10 times as many IP addresses in different /16s). Adding test-before-evict increases resistance of the node by an additional 3000 attacker IP addresses.

  Below I graph the attack over even greater attacker resources (i.e. more attacker controled IP addresses). Note that test-before-evict maintains some security far longer even against an attacker with 50,000 IPs. If this node had a larger tried table test-before-evict could greatly boost a nodes resistance to eclipse attacks.

  ![attacker graph long view](https://cloud.githubusercontent.com/assets/274814/17367108/96f46d64-595c-11e6-91cd-edba160598e7.png)

Tree-SHA512: fdad4d26aadeaad9bcdc71929b3eb4e1f855b3ee3541fbfbe25dca8d7d0a1667815402db0cb4319db6bd3fcd32d67b5bbc0e12045c4252d62d6239b7d77c4395
2018-03-06 21:36:56 +01:00
Ethan Heilman e68172ed9f Add test-before-evict discipline to addrman
Changes addrman to use the test-before-evict discipline in which an
address is to be evicted from the tried table is first tested and if
it is still online it is not evicted.

Adds tests to provide test coverage for this change.

This change was suggested as Countermeasure 3 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
2018-03-06 11:21:01 -05:00
Wladimir J. van der Laan 5c2aff8d95
Merge #10387: Eventually connect to NODE_NETWORK_LIMITED peers
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)

Pull request description:

  Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
  Accept and relay NODE_NETWORK_LIMITED peers in addrman.

Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
2018-03-01 15:31:15 +01:00
Jonas Schnelli fa999affad
[QA] Allow addrman loopback tests (add debug option -addrmantest) 2018-02-09 19:56:11 +11:00
Jonas Schnelli 6fe57bdaac
Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD 2018-02-09 19:56:10 +11:00
Cory Fields ba91724948 boost: remove useless threadGroup parameter from Discover 2018-02-08 14:35:28 -05:00
Cory Fields f26866b9ca boost: drop boost threads for upnp 2018-02-08 14:35:28 -05:00
MarcoFalke 0277173b1d
Merge #10498: Use static_cast instead of C-style casts for non-fundamental types
9ad6746ccd Use static_cast instead of C-style casts for non-fundamental types (practicalswift)

Pull request description:

  A C-style cast is equivalent to try casting in the following order:

  1. `const_cast(...)`
  2. `static_cast(...)`
  3. `const_cast(static_cast(...))`
  4. `reinterpret_cast(...)`
  5. `const_cast(reinterpret_cast(...))`

  By using `static_cast<T>(...)` explicitly we avoid the possibility of an unintentional and dangerous `reinterpret_cast`. Furthermore `static_cast<T>(...)` allows for easier grepping of casts.

  For a more thorough discussion, see ["ES.49: If you must use a cast, use a named cast"](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#es49-if-you-must-use-a-cast-use-a-named-cast) in the C++ Core Guidelines (Stroustrup & Sutter).

Tree-SHA512: bd6349b7ea157da93a47b8cf238932af5dff84731374ccfd69b9f732fabdad1f9b1cdfca67497040f14eaa85346391404f4c0495e22c467f26ca883cd2de4d3c
2018-02-07 16:15:28 -05:00
Clem Taylor c887f87d59 Extend #11583 to include the most common message generated by non-contributing peers (port scanners?)
37% of the log default log entries for a node that has been up for ~24hrs was "version handshake timeout..."
2018-02-03 04:08:04 -05:00
Cory Fields 660f5f19ae net: don't retry failed oneshot connections forever 2018-02-01 14:04:49 -05:00
Cory Fields 96dbd381cf net: initialize socket to avoid closing random fd's 2018-02-01 11:31:27 -05:00
Wladimir J. van der Laan 6e89de5ba7
Merge #11512: Use GetDesireableServiceFlags in seeds, dnsseeds, fixing static seed adding
2b839ab Update chainparams comment for more info on service bits per dnsseed (Matt Corallo)
62e7642 Fall back to oneshot for DNS Seeds which don't support filtering. (Matt Corallo)
51ae766 Use GetDesireableServiceFlags in static seeds, document this. (Matt Corallo)
fb6f6b1 bluematt's testnet-seed now supports x9 (and is just a static list) (Matt Corallo)

Pull request description:

  4440710 broke inserting entries into addrman from dnsseeds which
  did not support service bits, as well as static seeds. Static seeds
  were already being filtered by UA for 0.13.1+ (ie NODE_WITNESS), so
  simply changing the default service bits to include NODE_WITNESS
  (and updating docs appropriately) is sufficient. For DNS Seeds, not
  supporting NODE_WITNESS is no longer useful, so instead use
  non-filtering seeds as oneshot hosts irrespective of named proxy.

  I've set my testnet-seed to also support x9, though because it is simply a static host, it may be useful to leave the support off so that it is used as a oneshot to get addresses from a live node instead. I'm fine with either.

Tree-SHA512: 3f17d4d2b0b84d876981c962d2b44cb0c8f95f52c56a48c6b35fd882f6d7a40805f320ec452985a1c0b34aebddb1922709156c3ceccd1b9f8363fd7cb537d21d
2018-01-24 13:07:05 +01:00
Matt Corallo 62e764219b Fall back to oneshot for DNS Seeds which don't support filtering.
This allows us to not have to update the chainparams whenever a
DNS Seed changes its filtering support, as well fixes a bug
introduced in 44407100f where returned nodes will never be
attempted.
2018-01-19 12:41:28 -10:00
Matt Corallo 51ae7660b8 Use GetDesireableServiceFlags in static seeds, document this.
44407100f broke inserting entries into addrman from static seeds
(as well as dnsseeds which did not support service bits). Static
seeds were already being filtered by UA for 0.13.1+ (ie
NODE_WITNESS), so simply changing the default service bits to
include NODE_WITNESS (and updating docs appropriately) is
sufficient.

For DNS Seeds, we will later fix by falling back to oneshot if a
seed does not support filtering.
2018-01-19 12:40:05 -10:00
Akira Takizawa 595a7bab23 Increment MIT Licence copyright header year on files modified in 2017 2018-01-03 02:26:56 +09:00
Wladimir J. van der Laan 8585bb8f05
Merge #11616: Update ban-state in case of dirty-state during periodic sweep
57ac471 Call BannedListChanged outside of cs_setBanned lock (Jonas Schnelli)
c853812 Update ban-state in case of dirty-state during periodic sweep (Jonas Schnelli)

Pull request description:

  We do currently not update the UI during periodic ban list sweeps (via dump banlist).
  Fixes #11612

Tree-SHA512: bffbdcc03c63042177bdd511b0a9187c211c2b5011178481e8ee3e43a71eef1e4cd6b72f73672babab142b644f62f8b56f0aac1d26d3f19372b1f8644fec9395
2017-12-15 10:43:34 +01:00
Wladimir J. van der Laan ba2f19504c
Merge #11363: net: Split socket create/connect
3830b6e net: use CreateSocket for binds (Cory Fields)
df3bcf8 net: pass socket closing responsibility up to caller for outgoing connections (Cory Fields)
9e3b2f5 net: Move IsSelectableSocket check into socket creation (Cory Fields)
1729c29 net: split socket creation out of connection (Cory Fields)

Pull request description:

  Requirement for #11227.

  We'll need to create sockets and perform the actual connect in separate steps, so break them up.

  #11227 adds an RAII wrapper around connection attempts, as a belt-and-suspenders in case a CloseSocket is missed.

Tree-SHA512: de675bb718cc56d68893c303b8057ca062c7431eaa17ae7c4829caed119fa3f15b404d8f52aca22a6bca6e73a26fb79e898b335d090ab015bf6456cf417fc694
2017-12-13 05:42:32 +01:00
Cory Fields 3830b6e065 net: use CreateSocket for binds 2017-12-12 15:25:25 -05:00
Cory Fields 9e3b2f576b net: Move IsSelectableSocket check into socket creation
We use select in ConnectSocketDirectly, so this check needs to happen before
that.

IsSelectableSocket will not be relevant after upcoming changes to remove select.
2017-12-12 15:25:25 -05:00
Cory Fields 1729c29ded net: split socket creation out of connection
Also, check for the correct error during socket creation
2017-12-12 15:25:25 -05:00
Wladimir J. van der Laan 5d132e8b97
Merge #10574: Remove includes in .cpp files for things the corresponding .h file already included
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)

Pull request description:

  Remove includes in .cpp files for things the corresponding .h file already included.

  Example case:
  * `addrdb.cpp` includes `addrdb.h` and `fs.h`
  * `addrdb.h` includes `fs.h`

  Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.

  In line with the header include guideline (see #10575).

Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
2017-12-12 14:56:25 +01:00
Wladimir J. van der Laan 37ffa16933
Merge #11583: Do not make it trivial for inbound peers to generate log entries
be9f38c Do not make it trivial for inbound peers to generate log entries (Matt Corallo)

Pull request description:

  Based on #11580 because I'm lazy.

  We should generally avoid writing to debug.log unconditionally for
  inbound peers which misbehave (the peer being about to be banned
  being an exception, since they cannot do this twice).

Tree-SHA512: 8e59c8d08d00b1527951b30f4842d010a4c2fc440503ade112baa2c1b9afd0e0d1c5c2df83dde25183a242af45089cf9b9f873b71796771232ffb6c5fc6cc0cc
2017-12-11 17:06:22 +01:00
MarcoFalke fbce66a982
Merge #10493: Use range-based for loops (C++11) when looping over map elements
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)

Pull request description:

  Before this commit:

  ```c++
  for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
      T1 z = (*x).first;
      …
  }
  ```

  After this commit:

  ```c++
  for (auto& x : y) {
      T1 z = x.first;
      …
  }
  ```

Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
2017-11-30 17:10:05 -05:00
practicalswift 63f21d27ee net: Add missing locks in net.{cpp,h}
* writing variable 'nTotalBytesRecv' requires holding mutex 'cs_totalBytesRecv' exclusively
* writing variables 'nTotalBytesSent'/'nMaxOutboundTotalBytesSentInCycle'/'nMaxOutboundCycleStartTime' require holding mutex 'cs_totalBytesSent' exclusively
* writing variable 'nMaxOutboundTimeframe'/'nMaxOutboundLimit' require holding mutex 'cs_totalBytesSent' exclusively
* writing variable 'vAddedNodes' requires holding mutex 'cs_vAddedNodes' exclusively
2017-11-21 18:02:57 +01:00
Jonas Schnelli 57ac471a29
Call BannedListChanged outside of cs_setBanned lock 2017-11-19 12:51:44 -10:00
practicalswift a720b928c8 Remove includes in .cpp files for things the corresponding .h file already included 2017-11-16 22:26:34 +01:00
MeshCollider 1a445343f6 scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
  src/*.cpp \
  src/*.h \
  src/bench/*.cpp \
  src/bench/*.h \
  src/compat/*.cpp \
  src/compat/*.h \
  src/consensus/*.cpp \
  src/consensus/*.h \
  src/crypto/*.cpp \
  src/crypto/*.h \
  src/crypto/ctaes/*.h \
  src/policy/*.cpp \
  src/policy/*.h \
  src/primitives/*.cpp \
  src/primitives/*.h \
  src/qt/*.cpp \
  src/qt/*.h \
  src/qt/test/*.cpp \
  src/qt/test/*.h \
  src/rpc/*.cpp \
  src/rpc/*.h \
  src/script/*.cpp \
  src/script/*.h \
  src/support/*.cpp \
  src/support/*.h \
  src/support/allocators/*.h \
  src/test/*.cpp \
  src/test/*.h \
  src/wallet/*.cpp \
  src/wallet/*.h \
  src/wallet/test/*.cpp \
  src/wallet/test/*.h \
  src/zmq/*.cpp \
  src/zmq/*.h
do
  base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
2017-11-16 08:23:01 +13:00
Matt Corallo be9f38c613 Do not make it trivial for inbound peers to generate log entries
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).

To avoid removing logs for outbound peers, a new log is added to
notify users when a new outbound peer is connected which mimics
the version print.
2017-11-09 18:41:18 -05:00
Jonas Schnelli c8538123a7
Update ban-state in case of dirty-state during periodic sweep 2017-11-09 09:04:40 -10:00
practicalswift 3e09b390b4 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) 2017-11-09 16:53:34 +01:00
practicalswift f72cbf9ba9 Use unique_ptr for pfilter (CBloomFilter) 2017-11-09 16:53:34 +01:00
practicalswift 8ccf1bb0c3 Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) 2017-11-09 16:52:44 +01:00
practicalswift 73db0635a3 Use unique_ptr for upnp_thread (boost::thread) 2017-11-09 16:52:44 +01:00
Wladimir J. van der Laan ef3758d1ef
Merge #10696: Remove redundant nullptr checks before deallocation
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)

Pull request description:

  Rationale:
  * `delete ptr` is a no-op if `ptr` is `nullptr`

Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
2017-11-09 13:38:48 +01:00
Wladimir J. van der Laan 5ef3b6967b
Merge #11524: [net] De-duplicate connection eviction logic
5ce7cb9 [net] De-duplicate connection eviction logic (Thomas Snider)

Pull request description:

  While reviewing the safeguards against deliberate node isolation on the network by malicious actors, I found a good de-duplication candidate.

  I think this form is much more legible (the type of `cutoffs` notwithstanding).  ReverseCompareNodeTimeConnected is not included in the list since the cutoff size is a function of the remaining number of nodes in the candidate eviction set.

Tree-SHA512: ed17999fa9250dcf8448329219324477117e4ecd2d41dedd72ad253e44630eef50b3232c420f1862ebbfb9b8c94efbba1a235b519e39ff5946865c7d69a75280
2017-11-08 08:46:50 +01:00