The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
This is PR #4271, but with the changes to the descriptors, both the names of the
files and the names of the intermediate build artifact archives, removed.
This also closes#3775 if it goes in, because it covers the changes in
that PR.
New RPC methods: return an estimate of the fee (or priority) a
transaction needs to be likely to confirm in a given number of
blocks.
Mike Hearn created the first version of this method for estimating fees.
It works as follows:
For transactions that took 1 to N (I picked N=25) blocks to confirm,
keep N buckets with at most 100 entries in each recording the
fees-per-kilobyte paid by those transactions.
(separate buckets are kept for transactions that confirmed because
they are high-priority)
The buckets are filled as blocks are found, and are saved/restored
in a new fee_estiamtes.dat file in the data directory.
A few variations on Mike's initial scheme:
To estimate the fee needed for a transaction to confirm in X buckets,
all of the samples in all of the buckets are used and a median of
all of the data is used to make the estimate. For example, imagine
25 buckets each containing the full 100 entries. Those 2,500 samples
are sorted, and the estimate of the fee needed to confirm in the very
next block is the 50'th-highest-fee-entry in that sorted list; the
estimate of the fee needed to confirm in the next two blocks is the
150'th-highest-fee-entry, etc.
That algorithm has the nice property that estimates of how much fee
you need to pay to get confirmed in block N will always be greater
than or equal to the estimate for block N+1. It would clearly be wrong
to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay
12 uBTC and it will take LONGER".
A single block will not contribute more than 10 entries to any one
bucket, so a single miner and a large block cannot overwhelm
the estimates.
Upgrade for https://www.openssl.org/news/secadv_20140605.txt
Just in case - there is no vulnerability that affects ecdsa signing or
verification.
The MITM attack vulnerability (CVE-2014-0224) may have some effect on
our usage of SSL/TLS.
As long as payment requests are signed (which is the common case), usage
of the payment protocol should also not be affected.
The TLS usage in RPC may be at risk for MITM attacks. If you have
`-rpcssl` enabled, be sure to update OpenSSL as soon as possible.
1411a51 doc: Update hash in release process for new windows deps intermediate (Wladimir J. van der Laan)
386e732 gitian: make linux qt intermediate deterministic (Wladimir J. van der Laan)
I added a link to my guide about using docker containers + LXC (I am planning to maintain this at work
for future bitcoin versions), then I mentioned other virtualization options (KVM, LXC).
This commit includes a fix issue for documentation issue #4269 that consists in telling users to
checkout correct bitcoin version before using the gitian descriptors (otherwise all hell can break loose).
Also, I replaced URL for Debian 7.4 ISO with a correct one and added link to official Debian ISO sources.
A qt installation date snuck into the host utils (lrelease etc)
This doesn't affect the end product, so no dependency version bump.
It also doesn't explain why gavin's and mine build is different
There is no need to use any specific version of boost on Linux/Unix.
Even 1.37 should still work.
Also the mention of boost-dev doesn't belong after adding oldstable.
Remove it. libboost-all-dev is already mentioned earlier.
3a54ad9 Full translation update (Wladimir J. van der Laan)
9dd5d79 devtools: add a script to fetch and postprocess translations (Wladimir J. van der Laan)
58c01a3 qt: add transifex configuration file (Wladimir J. van der Laan)
202c95c devtools: have symbol check script check for exported symbols (Wladimir J. van der Laan)
92e3022 gitian: don't export any symbols from executable (Wladimir J. van der Laan)
3ab1664 gitian: build against Qt 4.6 (Wladimir J. van der Laan)
The year is 2014. All supported operating systems have IPv6 support,
most certainly at build time (this doesn't mean that IPv6 is configured,
of course).
If noone is exercising the functionality to disable it, that means it
doesn't get tested, and IMO it's better to get rid of it.
(it's also not used consistently in RPC/boost and Net code...)
Run this script from the root of the repository to update all translations from transifex.
It will do the following automatically:
- create a transifex configuration file
- fetch all translations
- post-process them into valid and committable format
This is a project-wide configuration file and should be the same for
everyone.
Also remove mention of creating it yourself from the translation process.
- People were having problems with the .so when installing in
alternative locations.
Like gitian, build a static library with -fPIC that can
be embedded into the executables.
- Add some missing steps
- Add reminder that BerkeleyDB is only needed when wallet support is
enabled
Should make it possible to run the resulting GUI executable on
Linux distributions that use Qt 4.6, such as Debian Wheezy and Tails.
Builds a mini-SDK for building against Qt 4.6. This includes the headers
as well as host utilities such as `lrelease`, `qrc` and `moc`.
This speeds up the gitian build a bit - libqt4-dev pulled in a lot of packages,
and is no longer needed as this provides a replacement of our own.
Note: This does not replace the Qt build with at static library. After this
commit we still build dynamically against the system Qt library. The only
difference is that compatibility with an older version is maintained. This
loses minor GUI functionality (such as setPlaceholderText) but still
allows integration into the window management of the host OS, unlike
when statically linking.
The patch to make it possible to configure the LXC IPs has been merged
upstream. This means that it is no longer needed to patch gitian.
Remove that workaround.
Drawback: The version string is no longer a valid git identifier.
For this reason the 'g' short hash prefix has been removed.
Exception: When building directly from a tag this behaves exactly like the previous behavior.
This allows formatting release versions with precision i.e. v0.9.2
This also allows arbitrary topicbranch names i.e. v0.9.1-glibc-compat
Per @laanwj request in #3724
Fixing Checkpoints Comment
Fixed Image Paths
Removed requirement.
Update Torrent Links.
Update Links 2
Link would not work.
2 Small Fixes
Changed in to from
@laanwj suggestion on safety
Bumps deps-linux, deps-win dependency versions as well.
qt-win does not need to be bumped, as although it depends on deps-win,
Qt doesn't use miniupnp. I verified this by rebuilding the dependency
and checking the the output is the same. Not having to rebuild Qt is a
good thing as it is huge.
Now that 0.9 is branched off, the new release notes for 0.10 or 0.11 or
1.0 should be added here.
Edits to preliminary 0.9.0 release notes should be made in the 0.9.0 branch.
The FTP server what we get libpng from only keeps the latest version in its main folder. Older versions are in the "history" folder. Apparently version 1.6.9 has been released, so 1.6.8 has moved to the history folder.
fe14e8d build: Change package name to Bitcoin Core (Wladimir J. van der Laan)
6c980c7 build: Package docs/ and don't package source. (Wladimir J. van der Laan)
39db27c build: Add bitcoin-cli.exe to installer (Wladimir J. van der Laan)
2f87b38 Adapt Windows installer for 64 bit (Wladimir J. van der Laan)
f622232 gitian: Windows 64 bit support (Wladimir J. van der Laan)
1cbbeb6 gitian: Add openssl to linux deps (Wladimir J. van der Laan)
64be7f7 gitian: Build boost dependency for linux (Wladimir J. van der Laan)
7eb99a8 gitian: Reduce build time for boost windows dependency (Wladimir J. van der Laan)
714cdec build: Pass BOOST_CPPFLAGS to sleep implementation test (Wladimir J. van der Laan)
0d40f5a build: Allow providing extra libs for Boost Chrono (Wladimir J. van der Laan)
e4b991e build: Auto-detect whether -DBOOST_TEST_DYN_LINK is needed (Wladimir J. van der Laan)
