This avoid calling out to mempool state during coin selection,
balance calculation, etc. In the next commit we ensure all wallet
callbacks from CValidationInterface happen in the same queue,
serialized with each other. This helps to avoid re-introducing one
of the issues described in #9584 [1] by further disconnecting
wallet from current chain/mempool state.
Thanks to @morcos for the suggestion to do this.
Note that there are several race conditions introduced here:
* If a user calls sendrawtransaction from RPC, adding a
transaction which is "trusted" (ie from them) and pays them
change, it may not be immediately used by coin selection until
the notification callbacks finish running. No such race is
introduced in normal transaction-sending RPCs as this case is
explicitly handled.
* Until Block{Connected,Disconnected} and
TransactionAddedToMempool calls also run in the CSceduler
background thread, there is a race where
TransactionAddedToMempool might be called after a
Block{Connected,Disconnected} call happens.
* Wallet will write a new best chain from the SetBestChain
callback prior to having processed the transaction from that
block.
[1] "you could go to select coins, need to use 0-conf change, but
such 0-conf change may have been included in a block who's
callbacks have not yet been processed - resulting in thinking they
are not in mempool and, thus, not selectable."
This prevents the wallet-RPCs-return-stale-info issue from being
re-introduced when new-block callbacks no longer happen in the
block-connection cs_main lock
This is both good practice (we want to move all such callbacks
into a background thread eventually) and prevents a lock inversion
when we go to use this in wallet (mempool.cs->cs_wallet and
cs_wallet->mempool.cs would otherwise both be used).
This is currently unused, but will by used by wallet to cache when
transactions are in the mempool, obviating the need for calls to
mempool from CWalletTx::InMempool()
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
This should fix issues with the multiwallet test and symlinks
when the tmpdir is a relative path.
Rather than fixing os.symlink to work with paths relative to a
directory descriptor, which does not work on Windows, normalize
the path instead.
8c2f4b888 Expose more parallelism with relaxed atomics (suggested in #9938). Fix a test to check the exclusive or of two properties rather than just or. (Jeremy Rubin)
Pull request description:
This PR is in response to #10026 and some feedback on #9938.
~Locally, all the checkqueue tests ran 3.2X faster on my machine. The worst offender, `test_CheckQueue_Correct_Random` ran 3.4X faster.~
1. ~Removes `GetRand()` and replaces it with a single deterministic FastRandomContext instance.~ #10321 replicated this
1. Exposes more parallelism with relaxed atomics, increasing chance of catching a bug. This does not change performance on my machine.
1. Makes one test case more restrictive (xor instead of or, see #9938).
Tree-SHA512: a59dfbee0273c713525a130dfedc1c7ff26f50c2aaca1e94ef5d759b1d6ea6338ffbd97f863b9f6209750d8a788a15fa8ae1bf26774ed2473c520811337e6b00
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
bfebc0b Remove dead store in ecdsa_signature_parse_der_lax. (Eelis)
Pull request description:
This was one of the issues found by Clang's static analyzer (#9573).
Tree-SHA512: 3674c56ccdc750bfe42e41d56b1f2058b6921c5354f7e757f6af10a759c5be75e23d6c7932a4524b9a24da308f426803b11deffbfcf09a5898a4204ee61d16d2
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
We have several pieces of information about subtrees:
1) What their current directory contents is
2) What their directory contents was at the time of the last subtree merge
3) What the directory contents of the upstream project is in the commit referred to by the subtree merge.
Normally, all 3 should be identical. git-subtree-check.sh so far only compared (1) with (3) however.
Fix this by comparing all three, and give some more useful diff output in the case of mismatch.
The added benefit is that (1) and (2) can be compared without needing to see the upstream repository.
619bb05 Squashed 'src/univalue/' changes from 16a1f7f6e..fe805ea74 (MarcoFalke)
Pull request description:
The subtree-merge commit also fixes the whitespace for failing tests, such that bisect doesn't break.
Finally, the bump also includes the changes that accidentally modified our subtree, such that the subtree check should work fine now:
```sh
./contrib/devtools/git-subtree-check.sh src/univalue
Tree-SHA512: 3009d1e52b6f41ef89ecc8a000649f08e44395538703f294995a6e913e3fbfb7813d6bd31fdb4acb6127fd4af99c095bf980a12f1f026bb27cacc66e1487cd1e
857b32b [tests] Add -walletnotify functional test (João Barbosa)
df18d29 [tests] Add -blocknotify functional test (João Barbosa)
9c72a46 [tests] Tidy up forknotify.py (John Newbery)
Pull request description:
This patch adds the missing functional tests for `-blocknotify` and `-walletnotify` notifications. The `-alertnotify` test file `forknotify.py` is renamed to `notifications.py` to accommodate the new tests. Credits to @jnewbery for this cleanup and unification.
Tree-SHA512: ee7b28b9f1bd225587efaefa6427c6d080ccb50ead390b23d94717c137a317183b37be00da0b2bffedd4192a363c971dea510d78d29278eb9fa76374f7855c09
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
f617d1b06 [depends] native_ds_store 1.1.2 (fanquake)
46b752ab5 [depends] native_mac_alias 2.0.6 (fanquake)
Pull request description:
mac_alias and ds_store have moved from Bitbucket to GitHub.
See https://github.com/al45tair/mac_alias and https://github.com/al45tair/ds_store.
mac_alias has been updated to be compatible with Python 3? ~~~so we should be able to drop our patch.~~~ I've dropped some of the patch for now.
Quickly tested on macOS, because depends building is broken with latest the Xcode see #11461.
Related #8134.
Tree-SHA512: d0017883f86b29bc4ab03bade5aaad9959e4343cd66596805fae48a1804e4bd150c77652f08e3e6cfafb3193f7c0183686f1f60c83f3a4204d40f76041c13ed2
47ba8cf71 scripted-diff: rename assert_raises_jsonrpc to assert_raises_rpc error (John Newbery)
677d893ff [tests] do not allow assert_raises_message to be called with JSONRPCException (John Newbery)
5864e9c16 [tests] remove direct testing on JSONRPCException from individual test cases (John Newbery)
Pull request description:
I did this a few months ago (here: #9707), but a few new examples have crept back in.
When testing RPC failures, the test case should always assert the error value and message, to ensure that the failure was for the correct reason. Not doing that can hide bugs in the test code and mean that the test is not testing the correct behaviour.
RPC failure testing should use the utility function `assert_raises_jsonrpc()` (renamed in the final commit of this PR to `assert_raises_rpc_error()`.
This PR does the following:
- changes all remaining instances of tests directly testing on `JSONRPCException` to calls to `assert_raises_jsonrpc()`
- prevents `assert_raises_message()` from being called with `JSONRPCException`
- scripted-diff changes `assert_raises_jsonrpc()` to `assert_raises_rpc_error()`
Tree-SHA512: 2cc5e320704ec623a6e5a27d3c2c81cea86b502e29896f03bb5bf92cc36725132c1144410aecdf49e90d4577d512ee467d50d8184e9d5c5d0870bfc931316a5a
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
c6a995e Improve readability of DecodeBase58Check(...) (practicalswift)
Pull request description:
Use the more readable form ...
```c++
&vchRet[vchRet.size() - 4]
```
... instead of ...
```c++
&v.end()[-n]
```
Has the added benefit of eliminating a spurious static analyzer warning about improper use of negative values.
Tree-SHA512: 5895310c189e9322082c28f34342ff9a6c238e2cae3f204521111c8a7981bc555af60b42de082c91608c1125dfc244a65c4faf929249a067a51435e2be74cb39
ce2418f [gui] reset addrProxy/addrSeparateProxyTor if colon char missing (Cristian Mircea Messel)
Pull request description:
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
Fixes#11209
Tree-SHA512: 2d9e6987cf05af3f41033290b61d00920f7fe4a65bea7efd96ed417a8ca7866d248f091e09947cc8aad3a6a4aa8b7777211cfff7f379a62188be50df2c46d4b2
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
