f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
cf82a9e Do not allow users to get keys from keypool without reserving them (Matt Corallo)
Pull request description:
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This partially reverts #9377. Would be nice to get this for 15 since its kinda crazy we have this option to begin with IMO, will need release notes as an RPC option is now ignored.
Tree-SHA512: 72b5ee9c4a229b84d799dfb00c56fe80d8bba914ce81a433c3f5ab325bf9bf2b839ee658c261734f0ee183ab19435039481014d09c41dbe155e6323e63beb01d
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This could be particularly nasty in some use-cases (especially
pre-HD-split) - eg a user might fundrawtransaction, then call
getnewaddress, hand out the address for someone to pay them, then
sendrawtransaction. This may result in the user thinking they have
received payment, even though it was really just their own change!
This could obviously result in needless key-reuse.
6b9faf7 [QA] add basic multiwallet test (Jonas Schnelli)
979d0b8 [tests] [wallet] Add wallet endpoint support to authproxy (John Newbery)
76603b1 Select wallet based on the given endpoint (Jonas Schnelli)
32c9710 Fix test_bitcoin circular dependency issue (Jonas Schnelli)
31e0720 Add wallet endpoint support to bitcoin-cli (-usewallet) (Jonas Schnelli)
dd2185c Register wallet endpoint (Jonas Schnelli)
Pull request description:
Alternative for #10829 and #10650.
It adds the most simplest form of wallet based endpoint support (`/wallet/<filename>`).
No v1 and no node/wallet endpoint split.
Tree-SHA512: 23de1fd2f9b48d94682928b582fb6909e16ca507c2ee19e1f989d5a4f3aa706194c4b1fe8854d1d79ba531b7092434239776cae1ae715ff536e829424f59f9be
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change).
This fixes an issue where you could reserve a keypool entry, then
top up the keypool, writing out a new key at the given index, then
return they key from the pool. This isnt likely to cause issues,
but given there is no reason to ever re-use keypool indexes
(they're 64 bits...), best to avoid it alltogether.
b0e8e2d Print one log message per keypool top-up, not one per key. (Gregory Maxwell)
41dc163 Increase wallet default keypool size to 1000. (Gregory Maxwell)
30d8f3a Pushdown walletdb though CWallet::AddKeyPubKey to avoid flushes. (Gregory Maxwell)
3a53f19 Pushdown walletdb object through GenerateNewKey/DeriveNewChildKey. (Gregory Maxwell)
Pull request description:
This carries the walletdb object from top-up through GenerateNewKey/DeriveNewChildKey/CWallet::AddKeyPubKey, which allows us to avoid the flush on destruction until the top up finishes instead of flushing the wallet for every key.
This speeds up adding keys by well over 10x on my laptop (actually something like 17x), I wouldn't be surprised if it were an even bigger speedup on spinning rust.
Then it increases the keypool size to 1000. I would have preferred to use 10,000 but in the case where the user creates a new wallet and then turns on encryption it seems kind of dumb to have >400KB of marked-used born unencrypted keys just laying around.
(Thanks to Matt for cluesticking me on how to bypass the crypter spaghetti)
Tree-SHA512: 868303de38fce4c3f67d7fe133f765f15435c94b39d252d7450b5fee5c607a3cc2f5e531861a69d8c8877bf130e0ff4c539f97500a6bc0ff6d67e4a42c9385c7
11590d3 Properly bound check conf_target in wallet RPC calls (Alex Morcos)
fd29d3d Remove checking of mempool min fee from estimateSmartFee. (Alex Morcos)
2fffaa9 Make QT fee displays use GetMinimumFee instead of estimateSmartFee (Alex Morcos)
1983ca6 Use CoinControl to pass custom fee setting from QT. (Alex Morcos)
03ee701 Refactor to use CoinControl in GetMinimumFee and FeeBumper (Alex Morcos)
ecd81df Make CoinControl a required argument to CreateTransaction (Alex Morcos)
Pull request description:
This builds on #10589 (first 5 commits from that PR, last 5 commits are new)
The first couple commits refactor to use the CCoinControl class to pass fee calculation parameters around.
This allows for fixing the buggy interaction in QT between the global payTxFee which can be modified by the RPC call settxfee or temporarily modified by the QT custom fee settings. Before these changes the GUI could sometimes send a transaction with a recently set payTxFee and not respect the settings displayed in the GUI. After these changes, using the GUI does not involve the global transaction confirm target or payTxFee.
The prospective fee displays in the smart fee slider and the coin control dialog are changed to use the fee calculation from GetMinimumFee, this simplifies the code and makes them slightly more correct in edge cases.
Maxing the fee calculation with the mempool min fee is move from estimateSmartFee to GetMinimumFee.
This fixes a long standing bug, and should be tagged for 0.15 as it is holding up finalizing the estimatesmartfee RPC API before release.
Tree-SHA512: 4d36a1bd5934aa62f3806d380fcafbef73e9fe5bdf190fc5259a3e3a13349e5ce796e50e7068c46dc630ccf56d061bce5804f0bfe2e082bb01ca725b63efd4c1
4c3b538 [logs] fix zapwallettxes startup logs (John Newbery)
e7a2181 [wallet] fix zapwallettxes interaction with persistent mempool (John Newbery)
ff7365e [tests] fix flake8 warnings in zapwallettxes.py (John Newbery)
Pull request description:
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
This PR also fixes the zapwallettxes.py functional test, which did not properly test this feature. The test line:
```py
assert_raises(JSONRPCException, self.nodes[0].gettransaction, [txid3])
#there must be a expection because the unconfirmed wallettx0 must be gone by now
```
is not actually testing the presence of the transaction since the RPC is being called incorrectly (with an array instead of a string). The `assert_raises()` passes since an assert is raised, but it's not the one the test writer had in mind!
Fixes#9710 .
Tree-SHA512: e3236efc7a2fd2b3bf1d9e2e8a7726d470c57f5d95cf41b7bde264edc8817bd36a6f3feff52f8de8db0ef64b7247c88b24e7ff7cefaa706cba86fe4e2135a508
d40a72ccb Clarify *(--.end()) iterator semantics in CWallet::TopUpKeyPool (Matt Corallo)
28301b978 Meet code style on lines changed in the previous commit (Matt Corallo)
4a3fc3562 Track keypool entries as internal vs external in memory (Matt Corallo)
Pull request description:
This is an alternative version of #10184. As @jonasschnelli points out there, the performance regressions are pretty minimal, but given that this is a pretty simple, mechanical change, its probably worth doing.
Tree-SHA512: e83f9ebf2998f8164d1b2eebe5e6dcdeadea8c30b7612861f830758c08bf4093cd6a67b3bcfa9cfcb139e5e0b106fc8898a975fc69f334981aefc756568ab613
0aadc11fd Avoid dereference-of-casted-pointer (Pieter Wuille)
Pull request description:
And prefer a static_cast to the intended reference type.
Tree-SHA512: e83b20023a4dca6029b46f7040a8a6fd54e1b42112ec0c87c3c3b567ed641de97a9e2335b57a2efb075491f641e5b977bc226a474276bea0c3c3c71d8d6ac54d
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
228987d84 getbalance example covers at least 6 confirms (Gregory Sanders)
Tree-SHA512: 328d60b007ee75d809f4d28a7d9e5537d3c1446bd30c4c2ae57c690b8e83f6287cbcd3d8c955e8ba07ab62e27f9d27497c55219ff14fd5af7759dec465673fa2
This check has been moved to the wallet logic GetMinimumFee. The rpc call to
estimatesmartfee will now no longer return a result maxed with the mempool min
fee, but automated fee calculations from the wallet will produce the same result
as before and coincontrol and sendcoins dialogs in the GUI will correctly
display the right prospective fee.
changes to policy/fees.cpp include a big whitespace indentation change.
Remove helper function (CalculateEstimateType) for determining whether
estimates should be conservative or not, now that this is only called
once from GetMinimumFee and incorporate the logic directly there.
dd97a529a Properly forbid -salvagewallet and -zapwallettxes for multi wallet. (Alex Morcos)
Tree-SHA512: dcde8f854ae957b4d3af4bcf1b811e0b6e9b93602764f86499e46a28d304cd4ee93ba058c03f6ca74ccb60e1310c83e53b698c64d93e5503115377655b80d44d
Due to the iterative process of selecting new coins in each loop a new fee is
calculated that needs to be met each time. In the typical case if the most
recent iteration of the loop produced a much smaller transaction and we have now
gathered inputs with too many fees, we can just reduce the change. However in
the case where there is no change output, it is possible to end up with a
transaction which drastically overpays fees. This commit addresses that case,
by creating a change output if the overpayment is large enough to support it,
this is accomplished by rerunning the transaction creation loop without
selecting new coins.
Thanks to instagibbs for working on this as well
Add support for setting each of these attributes on a per RPC call basis to sendtoaddress, sendmany, fundrawtransaction (already had RBF), and bumpfee (already had RBF and conf target).
9bbf600 Use method name from __func__ macro (darksh1ne)
Tree-SHA512: da6d0714f458b538189bbc2b53252ba353dcc1ef15fa780cb7f690a034b58ab0dbaa3a89f83f044c746241ee265a70fc092449f1cc7be4f190775423fbca5fc5
GetMinimumFee now passes the conservative argument into estimateSmartFee.
Call CalculateEstimateType(mode) before calling GetMinimumFee or estimateSmartFee to determine the value of this argument.
CCoinControl can now be used to control this mode.
73c942e Use "replaceable" instead of "rbfoptin" in bitcoin-tx. (Matt Corallo)
fb915d5 Use "replaceable" instead of "optIntoRbf" in fundrawtransaction. (Matt Corallo)
928c681 Use "replaceable" instead of "optintorbf" in createrawtransaction. (Matt Corallo)
Tree-SHA512: 8922451c00abb63aaa08b4a9e314e89c22233b32f207259fbc25367f7d5b67efbaccc7e2a4958c18611ad498da302296242860c7be965a0e996dcde3e89efa07
Use __func__ macro in std::runtime_exception to:
1. fix method name in CWalletTx::GetAvailableWatchOnlyCredit()
2. refactor CWalletTx::GetAvailableCredit()
ecb4fc382 fix typo in help text for removeprunedfunds (Akio Nakamura)
Tree-SHA512: 2603851f1ac90bc0b90ced6355b0056e4cb658303cb2cd03ee0827ed0053157ebb87de48076f4d4f556991bfdbdb65d0a68a8dbd275c501cee4c9b5746a9562b
2a96283 rpc: Update `generate` for developer notes (Wladimir J. van der Laan)
df7e2f0 rpc: Move the `generate` RPC call to rpcwallet (Wladimir J. van der Laan)
Tree-SHA512: ec658d6178f8435dc54b9d9c6dd59f873055a8ae0c3f177c02049d77b93107dd5fc17a1ff56d50f051810d52fdf306846eaba2ef4fc8d2a6cfa831f57a1045c4
This makes it possible to mine to any wallet when multi-wallet mode is added.
Solves the same problem as #10649, but IMO in a cleaner way.
It also gets rid of the circuitous `ScriptForMining` method on
`CValidationInterface`, which really doesn't belong there.
After this change it's still possible to mine without wallet through
`generatetoaddress`.
deaf48b Handle TIMESTAMP_WINDOW within CWallet::RescanFromTime (Russell Yanofsky)
5b2be2b Make CWallet::RescanFromTime comment less ambiguous (Russell Yanofsky)
9bb66ab Add RescanFromTime method and use from rpcdump (Russell Yanofsky)
ccf84bb Move birthday optimization out of ScanForWalletTransactions (Russell Yanofsky)
Tree-SHA512: cd38433b8f5c5e44ecfba830a6a26bd9a9d0f4a22ae42bce17773d1a6fb25e1ee4289484996dad2d7acfa03059917ff062459f25030a761da7083ba5fbc87bc9
6171826 Don't create change at the dust limit, even if it means paying more than expected (Alex Morcos)
Tree-SHA512: d4cf939b97a92d63d4703ad152093c9dc60e74af590697bc21adbcdf17fc9e6ffb37d46d5eefafbd69327d1bcb79911f1b826ce1d960d895d464c4408c4995c3
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
Use case: TryCreateDirectory(GetDataDir() / "blocks" / "index") would
fail if the blocks directory was not explicitly created before.
The line that did so was in a weird location and could be removed as a
result.
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
3fb81a8 Use list initialization (C++11) for maps/vectors instead of boost::assign::map_list_of/list_of (practicalswift)
Tree-SHA512: 63a9ac9ec5799472943dce1cd92a4b14e7f1fe12758a5fc4b1efceaf2c85a4ba71dad5ccc50813527f18b192e7714c076e2478ecd6ca0d452b24e88416f872f7
e94584858 scripted-diff: Use new naming style for insecure_rand* functions (Pieter Wuille)
2fcd9cc86 scripted-diff: Use randbits/bool instead of randrange where possible (Pieter Wuille)
2ada67852 Use randbits instead of ad-hoc emulation in prevector tests (Pieter Wuille)
5f0b04eed Replace rand() & ((1 << N) - 1) with randbits(N) (Pieter Wuille)
3ecabae36 Replace more rand() % NUM by randranges (Pieter Wuille)
efee1db21 scripted-diff: use insecure_rand256/randrange more (Pieter Wuille)
1119927df Add various insecure_rand wrappers for tests (Pieter Wuille)
124d13a58 Merge test_random.h into test_bitcoin.h (Pieter Wuille)
90620d66c scripted-diff: Rename cuckoo tests' local rand context (Pieter Wuille)
37e864eb9 Add FastRandomContext::rand256() and ::randbytes() (Pieter Wuille)
Tree-SHA512: d09705a3ec718ae792f7d66a75401903ba7b9c9d3fc36669d6e3b9242f0194738106be26baefc8a8e3fa6df7c9a35978c71c0c430278a028b331df23a3ea3070
9a5a1d7 RPC/rawtransaction: createrawtransaction: Check opt_into_rbf when provided with either value (Luke Dashjr)
23b0fe3 bitcoin-tx: rbfoptin: Avoid touching nSequence if the value is already opting in (Luke Dashjr)
b005bf2 Introduce MAX_BIP125_RBF_SEQUENCE constant (Luke Dashjr)
575cde4 [bitcoin-tx] add rbfoptin command (Jonas Schnelli)
5d26244 [Tests] extend the replace-by-fee test to cover RPC rawtx features (Jonas Schnelli)
36bcab2 RPC/Wallet: Add RBF support for fundrawtransaction (Luke Dashjr)
891c5ee Wallet: Refactor FundTransaction to accept parameters via CCoinControl (Luke Dashjr)
578ec80 RPC: rawtransaction: Add RBF support for createrawtransaction (Luke Dashjr)
Tree-SHA512: 446e37c617c188cc3b3fd1e2841c98eda6f4869e71cb3249c4a9e54002607d0f1e6bef92187f7894d4e0746ab449cfee89be9f6a1a8831e25c70cf912eac1570
656dbd871 Perform member initialization in initialization lists where possible (practicalswift)
Tree-SHA512: 048380f4da23ab1eaaf471801a01dbd76f2235afb686c1489b30a6bac109195134afc83414b8378d3482a9042d537ec62d30136dadb9347cf06b07fb5c693208
This change has no effect on wallet behavior.
On wallet startup, the transaction scan avoids reading any blocks with
timestamps older than the wallet birthday (less than nTimeFirstKey -
TIMESTAMP_WINDOW). This block skipping code currently resides in
CWallet::ScanForWalletTransactions but it doesn't really belong there because
it makes the implementation unnecessarily fragile and hard to understand, and
it never has any effect except at startup (because all other callers do their
rescans based on timestamps other than, but always greater or equal to,
nTimeFirstKey).
No change in behavior. Get rid of specifiedConfirmTarget if/else block and
rename specifiedConfirmTarget and ignoreUserSetFee variables to
ignoreGlobalPayTxFee.
211adc0 Use range-based for loops (C++11) when looping over vector elements (practicalswift)
Tree-SHA512: 0e007f20dcef99d3c7a1036265e00f689d69f42e02fd82dd8389f45b52d31947e5f9388de2610d3d9bd9f554915ce0d35ebce561e5ae3a9013956d0ee4937145
```
$ git blame src/policy/fees.cpp | grep becuase
3810e976 (2017-03-07 11:33:44 -0500 789) * checks for 2*target becuase we are taking the max over all time
$ git blame src/policy/fees.h | grep successfullly
2d2e1705 (2017-04-12 12:29:03 -0400 54) * representing that a tx was successfullly confirmed in less than or equal to
$ git blame src/wallet/feebumper.cpp | grep "hasen't"
a3878374 (2017-05-11 09:34:39 +0200 258) // make sure the transaction still has no descendants and hasen't been mined in the meantime
```
a38783747 Make sure we re-check the conditions of a feebump during commit (Jonas Schnelli)
9b9ca538c Only update the transactionrecord if the fee bump has been commited (Jonas Schnelli)
6ed4368f1 Make sure we use nTxConfirmTarget during Qt fee bumps (Jonas Schnelli)
be08fc39d Make sure we always update the table row after a bumpfee call (Jonas Schnelli)
2678d3dc6 Show old-fee, increase a new-fee in Qt fee bumper confirmation dialog (Jonas Schnelli)
2ec911f60 Add cs_wallet lock assertion to SignTransaction() (Jonas Schnelli)
fbf385cc8 [Qt] simple fee bumper with user verification (Jonas Schnelli)
Tree-SHA512: a3ce626201abf64cee496dd1d83870de51ba633de40c48eb0219c3eba5085c038af34c284512130d2544de20c1bff9fea1b78f92e3574c21dd4e96c11b8e7d76
Motivation for moving these is to make supporting IPC simpler (#10102), so
these lookups can be one-shot IPC requests, instead of back-and-forth
interactions over the IPC channel.
Also these functions are potentially useful outside of the bitcoin GUI (e.g.
for RPCs).
Start importwallet rescans at the first block with timestamp greater or equal
to the wallet birthday instead of the last block with timestamp less or equal.
This fixes an edge case bug where importwallet could fail to start the rescan
early enough if there are blocks with decreasing timestamps or multiple blocks
with the same timestamp.
An off-by-one-block bug in importmulti rescan logic could cause it to return
success in an edge case even when a rescan was not successful. The case where
this would happen is if there were multiple blocks in a row with the same
GetBlockTimeMax() value, and the last block was scanned successfully, but one
or more of the earlier blocks was not readable.
