1cff3d6cb0 Change in transaction pull scheduling to prevent InvBlock-related attacks (Gleb Naumenko)
Pull request description:
This code makes executing two particular (and potentially other) attacks harder.
### InvBlock
This behavior was described well [here](https://www.cs.umd.edu/projects/coinscope/coinscope.pdf) (page 11).
Per current implementation, if node A receives _INV_ (tx) from node B, node A sends _GETDATA_ to B and waits for _TX_ message back.
Node A is likely to receive more _INVs_ (regarding the same tx) from other peers. But node A would not send another _GETDATA_ unless it does not hear _TX_ back from node B for next 2 minutes (to save bandwidth)
Thus, if B is a malicious node, it can prevent node A from getting the transaction (even if all A’s peers have it) for 2 minutes.
This behavior seems to be an inherent limitation of the current P2P relay protocol, and I don’t see how it can be fundamentally changed (I can see workarounds which involve rewriting a lot of P2P code though).
### What does this PR fix?
The attacks I’m looking at involve preventing A from learning the transaction for 2*N minutes. To do that, an attacker has to spin up N nodes and send N _INVs_ simultaneously to node A (then InvBlocks will be queued with an interval of 2 minutes according to current implementation)
More precisely, 2 scenarios I’m looking at are:
1. An attacker censors a particular transaction. By performing InvBlock from different nodes, an attacker can execute a network-wide censorship of a particular transaction (or all transactions). The earlier an attacker founds the transaction he wants to censor, the easier it is to perform an attack. As it was pointed out by @gwillen, this is even more dangerous in the case of lightning, where transactions are known in advance.
2. Topology inference described in papers [1](https://www.cs.umd.edu/projects/coinscope/coinscope.pdf), [2](https://arxiv.org/pdf/1812.00942.pdf) involve network-wide InvBlock. This fix would not mitigate this type of inference, but I believe it will make it more expensive to perform (an attacker would have to create more transactions and perform more rounds to learn the topology, the second paper itself notes that InvBlock isolation is important for the attack).
### How does it work
This PR introduces bias toward outbound connections (they have higher priority when a node chooses from whom it should request a transaction) and randomizes the order.
As per @gmaxwell suggestion, GETDATA requests queue is created after processing all incoming messages from all nodes.
After this fix, if the incoming messages were [I1, I2, I3, O1, O2, O3, O4], the queue for _GETDATA_ may look like [O2, O1, O3, O4, I1, I3, I2, ….].
If {I1, I2, I3} were significantly earlier (but the difference is less than TX_TIMEOUT=60 s) than others, the queue for _GETDATA_ may look like [I2, O2, O1, O3, O4, I1, I3, ….].
### Other comments:
1. This mitigation works better if the connectivity is higher (especially outbound, because it would be less likely that 2 _GETDATAs_ for inbound malicious nodes queued together)
Tree-SHA512: 2ad1e80c3c7e16ff0f2d1160aa7d9a5eaae88baa88467f156b987fe2a387f767a41e11507d7f99ea02ab75e89ab93b6a278d138cb1054f1aaa2df336e9b2ca6a
b985e9c850 Add release notes for importmulti descriptor support (MeshCollider)
fbb5e935ea Add test for importing via descriptor (MeshCollider)
9f48053d8f [wallet] Allow descriptor imports with importmulti (MeshCollider)
d2b381cc91 [wallet] Refactor ProcessImport() to call ProcessImportLegacy() (John Newbery)
4cac0ddd25 [wallet] Add ProcessImportLegacy() (John Newbery)
a1b25e12a5 [wallet] Refactor ProcessImport() (John Newbery)
Pull request description:
~~Based on #14454#14565, last two commits only are for review.~~
Best reviewed with `?w=1`
Allows a descriptor to be imported into the wallet using `importmulti` RPC. Start and end of range can be specified for ranged descriptors. The descriptor is implicitly converted to old structures on import.
Also adds a simple test of a P2SH-P2WPKH address being imported as a descriptor. More tests to come, as well as release notes.
Tree-SHA512: 160eb6fd574c4ae5b70e0109f7e5ccc95d9309138603408a1114ceb3c558065409c0d7afb66926bc8e1743c365a3b300c5f944ff18b2451acc0514fbeca1f2b3
595283851 [rpc] util: add deriveaddresses method (Sjors Provoost)
Pull request description:
Usage:
```sh
bitcoin-cli deriveaddresses "wpkh([d34db33f/84h/0h/0h]xpub6DJ2dNUysrn5Vt36jH2KLBT2i1auw1tTSSomg8PhqNiUtx8QX2SvC9nrHu81fT41fvDUnhMjEzQgXnQjKEu3oaqMSzhSrHMxyyoEAmUHQbY/0/0)"
[
"bc1qg6ucjz7kgdedam7v5yarecy54uqw82yym06z3q"
] // part of the BIP32 test vector
```
Avoids the need for external (BIP32) libraries to derive an address. Can be used in conjunction with `scantxoutset` as a poor mans wallet. Might be useful to test more complicated future descriptors.
~To keep it as simple as possible it only supports descriptors that result in a single address, so no `combo()` and ranges.~
As discussed recently on IRC it might make sense to put this in a separate utility along with other descriptor and psbt utility functions which don't need a chain or wallet context. However I prefer to leave that to another PR.
Tree-SHA512: b8e53db11a8fd87638cc98766270cc3be9adc4b3e5085798a6a4e2e6ad252bf6d2189346bbb2da72d04d13f7f1e80b5cb88e8039653bea1f150602a876ef7f34
6440e61375 qa: Drop RPC connection if --usecli (João Barbosa)
Pull request description:
Drop the RPC connection used in `TestNode.wait_for_rpc_connection` if `--usecli` is set. If the connection is kept and not used the `Connection: close` header is never sent and so the connection only closes due to timeout (30 sec).
It might be sensible to revert e98a9eede2 in a follow up, however it changes the shutdown behavior.
Tree-SHA512: 2a8ee68b82ab612a556390aae521379e592c39ea0a7855a119282e6fe4cbf02ecafe7a5e2ee37d480f2c0600fa64791117a80fecc7bbe6bbb354107972b3b320
87aa0b48af netaddress: Make IPv4 loopback comment more descriptive (Carl Dong)
6180b5f32b netaddress: Fix indentation in IsLocal (Carl Dong)
Pull request description:
This also makes the comment match the IPv6 comment just below this hunk.
Tree-SHA512: 9b91195e71e18156c9e013f63a6d430c67951aabb4a0c2f48f3bf852570c13887572b9e2fa52f4e1beba8685a9cae8949d4d03cd618a78f88566cf9e85dc64a8
fa2a69fcb9 doc: Add cs_main lock annotations for mapBlockIndex (practicalswift)
Pull request description:
Marked as "doc" because it didn't change the bitcoind on my system with default configure settings for both gcc and clang.
Tree-SHA512: ba203f16c1cdc834a61c65bb5fb20bbaf7d8bff0c3a1b8ef46bc1d3669092191221e26abd7e580efab2f9bd5a992dc363251f1b68c6cd68f8204d62675868cf1
e8db6b8044 Qt: Fix update headers-count (Jonas Schnelli)
7bb45e4b7a Qt: update header count regardless of update delay (Jonas Schnelli)
Pull request description:
Update the block and header tip is constraint to have a minimal distance of 250ms between updates... which can lead to miss the last header update.
The modal overlay then assumes we are still in header sync and the view get stuck in "syncing headers,..." (while it's actually syncing blocks).
This removes the 250ms minimal delta for header updates as well as it fixes the correct display of how header updates should update the labels.
Tree-SHA512: 57608dac822b135cd604fc6ba1c80f25c0202a6e20bb140362026615d4bf243ef4fcc254a11bad36419c554a222a2f4947438d4ce44aa14041d1874751643d68
fa1db331de travis: Only exit early if compilation took longer than 30 min (MarcoFalke)
Pull request description:
As opposed to 25 minutes, which hits quite often when a header changes or the pull request cache is outdated.
Tree-SHA512: 3d585e6441a4e5620eb30cf31dc7219fabe3fe2adb53c485339ed9d627a40307af1b0aa2bf73353322932952d92444e29cdef21914da166f20eab7a288a75df5
13782b8ba8 docs: add perf section to developer docs (James O'Beirne)
58180b5fd4 tests: add utility to easily profile node performance with perf (James O'Beirne)
Pull request description:
Adds a context manager to easily (and selectively) profile node performance during functional test execution using `perf`.
While writing some tests, I encountered some odd bitcoind slowness. I wrote up a utility (`TestNode.profile_with_perf`) that generates performance diagnostics for a node by running `perf` during the execution of a particular region of test code.
`perf` usage is detailed in the excellent (and sadly unmerged) https://github.com/bitcoin/bitcoin/pull/12649; all due props to @eklitzke.
### Example
```python
with node.profile_with_perf("large-msgs"):
for i in range(200):
node.p2p.send_message(some_large_msg)
node.p2p.sync_with_ping()
```
This generates a perf data file in the test node's datadir (`/tmp/testtxmpod0y/node0/node-0-TestName-large-msgs.perf.data`).
Running `perf report` generates nice output about where the node spent most of its time while running that part of the test:
```bash
$ perf report -i /tmp/testtxmpod0y/node0/node-0-TestName-large-msgs.perf.data --stdio \
| c++filt \
| less
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 135 of event 'cycles:pp'
# Event count (approx.): 1458205679493582
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ................... ........................................................................................................................................................................................................................................................................
#
70.14% 0.00% bitcoin-net bitcoind [.] CNode::ReceiveMsgBytes(char const*, unsigned int, bool&)
|
---CNode::ReceiveMsgBytes(char const*, unsigned int, bool&)
70.14% 0.00% bitcoin-net bitcoind [.] CNetMessage::readData(char const*, unsigned int)
|
---CNetMessage::readData(char const*, unsigned int)
CNode::ReceiveMsgBytes(char const*, unsigned int, bool&)
35.52% 0.00% bitcoin-net bitcoind [.] std::vector<char, zero_after_free_allocator<char> >::_M_fill_insert(__gnu_cxx::__normal_iterator<char*, std::vector<char, zero_after_free_allocator<char> > >, unsigned long, char const&)
|
---std::vector<char, zero_after_free_allocator<char> >::_M_fill_insert(__gnu_cxx::__normal_iterator<char*, std::vector<char, zero_after_free_allocator<char> > >, unsigned long, char const&)
CNetMessage::readData(char const*, unsigned int)
CNode::ReceiveMsgBytes(char const*, unsigned int, bool&)
...
```
Tree-SHA512: 9ac4ceaa88818d5eca00994e8e3c8ad42ae019550d6583972a0a4f7b0c4f61032e3d0c476b4ae58756bc5eb8f8015a19a7fc26c095bd588f31d49a37ed0c6b3e
47012391ec [Docs] Small updates to getrawtransaction description (Amiti Uttarwar)
Pull request description:
As per review comments on https://github.com/bitcoin/bitcoin/pull/15159
Tree-SHA512: 0bbbe956b47d177f7e67c5ab2048287783327d9e07a679d64d79aee3ea8633e769f75b59d3dbce517924ba5d64d6c44f26bf49e16d40612463e460ad1a238129
ef0b01217a tests: Make updatecoins_simulation_test deterministic (practicalswift)
Pull request description:
Make test `updatecoins_simulation_test` deterministic.
Can be verified using `contrib/test_deterministic_coverage.sh` introduced in #15296.
Related:
* #15296: "tests: Add script checking for deterministic line coverage in unit tests"
* #15324: "test: Make bloom tests deterministic"
* #14343: "coverage reports non-deterministic"
Tree-SHA512: 3466e28a42dd3735effb8542044d88e8350a470729d4a4f02abce9d6367de6568d698131469ba154d3dc76d448bacb360b7aefd066bb5b91408c0be375dd3ecb
364cff1cab Fix issue #9683 "gui, wallet: random abort (segmentation fault) running master/HEAD". (Chris Moore)
Pull request description:
Patch taken from @ryanofsky's comment https://github.com/bitcoin/bitcoin/issues/9683#issuecomment-448035913.
[MarcoFalke wrote](https://github.com/bitcoin/bitcoin/issues/9683#issuecomment-454066004):
> Mind to submit this patch as a pull request?
So that's what I'm doing.
I was regularly seeing crashes on startup before applying this patch and haven't seen a single crash on startup since applying it almost a month ago.
Tree-SHA512: 3bbb2291cdf03ab7e7b5b796df68d76272491e35d473a89f4550065554c092f867659a7b8d7a1a91461ae4dc9a3b13b72541eafdbd732536463e9f3cf82300c8
Many developers have their own tools and tricks to be more productive
during their cycles, so let's document the best ones so that everyone
can benefit from them.
0164b0f5cf build: Remove WINVER pre define in Makefile.leveldb.inlcude (Chun Kuan Lee)
d0522ec94e Drop defunct Windows compat fixes (Ben Woosley)
d8a2992067 windows: Call SetProcessDEPPolicy directly (Chun Kuan Lee)
1bd9ffdd44 windows: Set _WIN32_WINNT to 0x0601 (Windows 7) (Chun Kuan Lee)
Pull request description:
The current minimum support Windows version is Vista. So set it to 0x0600
5a88def8ad/mingw-w64-headers/include/sdkddkver.h (L19)
Tree-SHA512: 38e2afc79426ae547131c8ad3db2e0a7f54a95512f341cfa0c06e4b2fe79521ae67d2795ef96b0192e683e4f1ba6183c010d7b4b8d6b3e68b9bf48c374c59e7d
851380ce17 remove deprecated mentions of signrawtransaction from fundraw help (Gregory Sanders)
Pull request description:
RPC call has been removed as of 0.17.99.
Tree-SHA512: a6a12a0e4572acd9b532c1719be85ed6f29d1c1a28f9ce691398528b8dde4fb4a3222b8f68632fcb1a8eddfe2d31e96d5efd5bc51c041af8e7cb99b61ca3a167
aebafd0edf Rename Chain getLocator -> getTipLocator (Russell Yanofsky)
2c1fbaa771 Drop redundant get_value_or (Russell Yanofsky)
84adb206fc Fix ScanForWalletTransactions start_block comment (Russell Yanofsky)
2efa66b464 Document rescanblockchain returned stop_height being null (Russell Yanofsky)
db2d093233 Add suggested rescanblockchain comments (Russell Yanofsky)
a8d645c934 Update ScanForWalletTransactions result comment (Russell Yanofsky)
95a812b599 Rename ScanResult stop_block field (Russell Yanofsky)
Pull request description:
This implements suggested changes from #14711 review comments that didn't make make it in before merging.
There are no changes in behavior in this PR, just documentation updates, simplifications, and variable renames.
Tree-SHA512: 39f1a5718195732b70b5e427c3b3e4295ea5af6328a5991763a422051212dfb95383186db0c0504ce2c2782fb61998dfd2fe9851645b7cb4e75d849049483cc8
This commit adds a ProcessImportLegacy() function which
currently does nothing. It also unindents a block of
code for a future move-only change.
Reviewer hint: review with -w to ignore whitespace changes.
This commit is move-only and doesn't make any functional changes. It
simply moves code around within ProcessImport() in preparation for
refactors in the next commits.
77777c5624 log: Construct global logger on first use (MarcoFalke)
Pull request description:
The (de)initialization order is not well defined in C++, so generally it is not safe to use globals as the (de/con)structor of one global could use the (de/con)structor of another global before/after it has been (con/de)structed.
Specifically this fixes:
* `g_logger` might not be initialized on the first use, so do that. (Fixes#15111)
Tree-SHA512: eb9c22f4baf31ebc5b0b9ee6a51d1354bae1f0df186cc0ce818b4483c7b5a7f90268d2b549ee96b4c57f8ef36ab239dc6497f74f3e2ef166038f7437c368297d
107623c26c net: Correct comparison of addr count (Carl Dong)
Pull request description:
`LOCAL_NONE` is supposed to be an enum indicating the `nScore` of a
`LocalServiceInfo` rather than the count of an addr in `mapLocalHost`.
Tree-SHA512: a47a0859dd11c991d75b54e96b08c502e3d235f7a6522a2355053f377d05e7853483996919292f458d917a561b23951e6945d6bf0ff5a2f29513c477c640bdd2
bad1716c6d init: Modify docs and add release note for 12255 (Carl Dong)
b0c7b54d0c init: Use systemd automatic directory creation (Carl Dong)
Pull request description:
- `-datadir` option specified.
- Ask systemd to create and set the right mode for PID directory, configuration directory, and data directory.
- Tell systemd our group so it will set the right owner for aforementioned directories.
More information: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
Tree-SHA512: a6fad1efa2be433c1fdd863df3ff232736ed709a9e281f51a003b40987d8c213dc64a52bc13a19c85bf85680e78f0be112ecaf32ac274b1ff93bac84a1208845
df8a7d3408 qt: Pre-0.18 split-off translations update (Wladimir J. van der Laan)
Pull request description:
- Update transifex slug
- Mention update of MSVC build in `doc/translation_process.md`
- Do a `make translate` to update English translations
- Pull current translations from transifex
Tree-SHA512: 2f3102ff64167d5feaf484b2c45cd6aa1d06ac4f370107f0db5575fde023b3dfaea07e7178978bfff111fa80dbe4e56bd05b5774fc7c111b5273d33b3dcd44ad
fa6b7b9cf6 travis: Revert "Run extended tests once daily" (MarcoFalke)
Pull request description:
Now that the extended tests are only pruning and dbcrash, both which are too long [1] to run on travis, we can revert this commit. All tests other than those two are still run for every travis pull request or cron run.
[1] https://travis-ci.org/bitcoin/bitcoin/jobs/487615211#L2930
Tree-SHA512: dff293823336677380f6e804379125687869a4b547c968f0b6aae80daee1cbca2cfb845b63de7135f31fbe2383d8d7654694b6dc8a6a6b7d02d57ee8ff107527
