86cddf0856 doc: add detached release notes for #14060 (mruddy)
Pull request description:
Adding detached release notes for #14060 in order to assist with https://github.com/bitcoin/bitcoin/pull/14688.
Tree-SHA512: 170cd0b6ac27237f58875f301132e0695dee36eec5d90a0c1234c0fa9db125151e6cebd94e63e634ddc4ddcfb77d7a4a07434ffd3725cb0dfa13fc4ccfbde2a0
ba8f0c6c8d Release notes: integrate detached release notes (David A. Harding)
6062f0e613 Release notes: update notes through to 11e1ac3ae0 (David A. Harding)
Pull request description:
This documents changes listed by `git log v0.17.0...11e1ac3 --merges` and integrates the existing detached release notes into the main file.
My goal is to update the release notes each month in order to reduce the amount of writing and review that needs to be done all at once near the start of the RC cycle.
Note: I've chosen to use fully-qualified URLs for linking to documentation, rather than shorter relative URLs that would otherwise be preferred, as the release notes are commonly copied into emails, reddit threads, and blog posts where relative URLs would be incomplete or would point to the wrong page.
Tree-SHA512: a943327d48e166f4a188ab0f468972609276e9c8f0ed85513823511ed989606445bf6b0ae9dd693b5d1e13d2f98c13573acd13865c57fe9c8ee9dbd04ceeff7f
a6b5ec18f rpc: creates possibility to preserve labels on importprivkey (marcoagner)
Pull request description:
Closes#13087.
As discussed in the issue, this is a feature request instead of a bug report since the behaviour was as intended (i.e. label with default: `''`). With this, the old behaviour is kept while the possibility to achieve the preservation of labels, as expected in the open issue, is added.
Tree-SHA512: b33be50e1e7f62f7ddfae953177ba0926e2d848961f9fac7501c2b513322c0cb95787745d07d137488267bad1104ecfdbe800c6747f94162eb07c976835c1386
a4edb168b6 ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
33ae985912 doc: Update OpenBSD build guide for 6.4 (fanquake)
6d247b1148 gitignore contents of db4 folder (Marty Jones)
Pull request description:
Includes a commit from #14314.
The `disable-dependency-tracking ` workaround is still required to run `./configure` (cc #14404).
`gmake check -j4` pass.
`src/bitcoind` runs and "starts" syncing.
Tree-SHA512: 72d78eb0d94fc4f2bbcf901d867f10f0e85d8a4f43969c598953278343ed826a26d1ebe6772dcc0fbd1fc608e88b7c86e31656232c1efb0656c537176fb9de4c
14a06525b2 tests: add test for 'getaddressinfo' RPC result 'ischange' field (whythat)
93d1aa9abc rpcwallet: add 'ischange' field to 'getaddressinfo' response (whythat)
Pull request description:
Implementation of proposal in #14396.
This introduces `CWallet::IsChange(CScript&)` method and replaces original `CWallet::IsChange(CTxOut&)` method with overloaded version that delegates to the new method with *txout*'s `scriptPubKey`. In this way `TODO` note from the original method can still be addressed in a single place.
Tree-SHA512: ef5dbc82d76b4b9b2fa6a70abc3385a677c55021f79e187ee2f392ee32bc6b406191f4129acae5c17b0206e72b6712e7e0cad574a4bbd966871c2e656c45e041
9605bbd315 Make clear function argument case in dev notes (Carl Dong)
Pull request description:
Rationale:
For new developers, they might be confused if they see that function arguments are sometimes `camelCase`'d in the codebase. This makes it clear that they _should_ be `snake_case`'d (maybe because no one's gotten to fixing them yet).
Tree-SHA512: 9db16d1fedf9761121844a0865ae3fefea94b5dbdfb36cb18f99cbc73e117f7d798a019f28a1c8bca19772502de2f9ed063f03bd911ffc4d248ec7386cd87d97
0a04667613 FreeBSD: Document Python 3 requirement for 'gmake check' (Murray Nesbitt)
Pull request description:
`doc/build-freebsd.md` doesn't mention that Python 3 is required to run the test suite. Currently, `gmake check` fails without it.
Tree-SHA512: 19117671bf528d335146d821e5cd4108f2f6ae014fb9a6d0030a322b23d1bc5f677e46896b575a7ca78b137315b60e63ad8b03ad695fe0aae3e9f50b060a3561
c11875c590 Add segwit address tests for importmulti (MeshCollider)
201451b1ca Make getaddressinfo return solvability (MeshCollider)
1753d217ea Add release notes for importmulti segwit change (MeshCollider)
353c064596 Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf0 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
5918204304 Removed explicit mention of storage requirement (squashed) (Martin Erlandsson)
Pull request description:
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Tree-SHA512: 3d1e0b1e70c2e2a5003f437c7deba8bc72f487852948c298db154aaf29184fa407e122ab7fdff9bfb4e52cc6062bc2d2122bbbdf805283aed21aa685cf29681c
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Removed mention of storage requirement
Agreeing with @laanwj that this mention of the storage requirement could be removed, I did so and changed the wording accordingly.
Would be nice to be able to add a link to a canonical source that is always updated, for those who want a number.
Update doc/README.md
Co-Authored-By: merland <martin@megabit.se>
Update README.md
added a missing 'a'
eeeaa29214 descriptors.md: Refer to descriptors as describing instead of matching (Russell Yanofsky)
eb49412562 doc/descriptors.md tweaks (Russell Yanofsky)
Pull request description:
Add some implementation details, and tweak phrasing in examples section to be more explicit about how expressions are used for matching.
Tree-SHA512: a9dc7bc0fc370548189a789f31c04bd11103cdd2a99bcb909fa1b1dfa4e78509813dad5d5c9e3db98d66929f45cb5704f5c46ab4cbd800fef22cd8465f80ef33
1fb3c167c3 Add `doc/bitcoin-conf.md` (Hennadii Stepanov)
Pull request description:
From the IRC:
> 2018-10-16T05:35:03 \<wumpus\> if something can be solved by better documentation, please work on documentation!
> 2018-10-16T05:35:12 \<wumpus\> don't change the code instead
Refs:
- #14370
- #14427
- #14494
Based on the BITCOIN.CONF(5) manual page written by Micah Anderson \<micah@debian.org\> for the Debian system.
Tree-SHA512: 16393c9073c027fa1c46f8b59651e60b9a3159b3aeb9b3102040c292d2787f32b1ead5977957ac3ac0759a4bf626650a2325b68ad84320964ac089ffc2d3b4f4
b6b9915318 Textual improvements (Martin Erlandsson)
Pull request description:
Just added a few commas in the right places, to increase readability.
(Also, getting my feet wet in regards to the contribution process...)
Tree-SHA512: 9281af792436efe916e898b34fe20e909291d0c0917e8ccdc4a2af78cf9b6ba7736c554e53b6dbe1d9392b7583b33c3d77b769ab6424c3d7a65513535811878c
d56a068935 docs: Add release notes for listwalletdir RPC (João Barbosa)
0cb3cad166 qa: Add tests for listwalletdir RPC (João Barbosa)
cc3377360c rpc: Add listwalletdir RPC (João Barbosa)
d1b03b8e5f interfaces: Add getWalletDir and listWalletDir to Node (João Barbosa)
fc4db35bfd wallet: Add ListWalletDir utility (João Barbosa)
Pull request description:
`ListWalletDir` returns all available wallets in the current wallet directory.
Based on MeshCollider work in pull #11485.
Tree-SHA512: 5843e3dbd1e0449f55bb8ea7c241a536078ff6ffcaad88ce5fcf8963971d48c78600fbc4f44919523b8a92329d5d8a5f567a3e0ccb0270fdd27366e19603a716
3b706212ad doc: RPC documentation (Karel Bílek)
Pull request description:
The auto-generated RPC docs seem to work so far ( https://bitcoincore.org/en/doc/ + 0.17.0 https://github.com/bitcoin-core/bitcoincore.org/pull/618 ). There are some problems (the design of the list on the right is not ideal, and apparently the huge list of pages slows down jekyll), but that can be fixed later; people are already linking to the docs now and looking for them there
So I am adding the RPC docs to the release process.
The script is here and it is written in golang, since I am most confident in the language; if necessary, I can try to rewrite to python, which is more common in bitcoin tooling
https://github.com/bitcoin-core/bitcoincore.org/tree/master/contrib/doc-gen
Tree-SHA512: ba1b7696bb7ceb6cee4ff222b006b8c18768dd9283a4130751714a782d75ea2ca33f8d9fc4a5263d85a2f001c254daa0cee3b09cc7cba7366c66c5a115d8352a
- changes importprivkey behavior to overwrite existent label if one
is passed and keep existing ones if no label is passed
- tests behavior of importprivkey on existing address labels and
different same key destination
fad95e8da6 doc: Split build linux dependencies (MarcoFalke)
0000009015 doc: Split depends installation instructions per arch (MarcoFalke)
Pull request description:
The current depends installation instructions fail on bionic with
```
E: Unable to locate package g++-4.8-aarch64-linux-gnu
E: Unable to locate package gcc-4.8-aarch64-linux-gnu
E: Unable to locate package g++-4.8-arm-linux-gnueabihf
E: Unable to locate package gcc-4.8-arm-linux-gnueabihf
```
Also, they fail due to missing dependencies `make automake cmake pkg-config python3`
Fix this by removing the explicit version and splitting them into common instructions and instructions per linux architecture.
Tree-SHA512: 25d5efa7450a0b1bbd569f431158f5a25bf4fe34f6adc32ebdfd6b6db9447ce083f555f20ff5b9f7c458864986c15d65219a31a1cd2b18bad9965ece2ea5e3be
not that temporary anymore
Tree-SHA512: c44bfca71573b3d70001d339138715fc6fbceae2e370f2e1e8ba5bdfdb19e8ec4b0a59d45ff8565e0f784d4659f51e8089a6d892a73362b428d8a98097fc8532
a2a04a5abb Bugfix: Only run bitcoin-tx tests when bitcoin-tx is enabled (Luke Dashjr)
92af71cea9 configure: Make it possible to build only one of bitcoin-cli or bitcoin-tx (Luke Dashjr)
Pull request description:
Includes #5618 (which the reasons for rejecting no longer hold true)
Tree-SHA512: f30a8e4a2f70166b7cabef77c4674163b3a9da14c6a547d34f00d1056a19bf4d23e22851eea726fad2afc8735d5473ae91122c770b65ac3886663dc20e2c5b70
