03b8596dd6 Add checksum in gitian build scripts for ossl (TheCharlatan)
Pull request description:
This adds a checksum in the gitian build script to make sure that ossl tool and theuni's patch matches what is expected. Also changes the url to use https.
Tree-SHA512: bd25acda1c7d9ca94e710bdfa915d20810101e10b0c68913a00fcb0eada25cdc2d59f7efebc822e07dea7eaab058024e6c53031883ded0ecf9f08212e50a25b3
645e905c32 doc: Add release notes for unloadwallet change to synchronous call (João Barbosa)
c37851de57 rpc: Make unloadwallet wait for complete wallet unload (João Barbosa)
Pull request description:
Currently the `unloadwallet` RPC is asynchronous, it only signals the intent to unload the wallet and then returns the response to the client. The actual unload can happen later and the client has no way to be notified of that.
This PR makes the `unloadwallet` RPC synchronous, meaning that it blocks until the wallet is fully unloaded.
Replaces #14919, fixes#14917.
Tree-SHA512: ad88b980e2f3652809a58f904afbfe020299f3aa6a517f495ba943b8d54d4520f6e70074d6749be8f5967065c0f476e0faedcde64c8b4899e5f99c70f0fd6534
a0ac15459a doc: Add getrpcinfo release notes (João Barbosa)
251a91c1bf qa: Add tests for getrpcinfo (João Barbosa)
d0730f5ce4 rpc: Add getrpcinfo command (João Barbosa)
068a8fc05f rpc: Track active commands (João Barbosa)
bf4383277d rpc: Remove unused PreCommand signal (João Barbosa)
Pull request description:
The new `getrpcinfo` command exposes details of the RPC interface. The details can be configuration properties or runtime values/stats.
This can be particular useful to coordinate concurrent functional tests (see #14958 from where this was extracted).
Tree-SHA512: 7292cb6087f4c429973d991aa2b53ffa1327d5a213df7d6ba5fc69b01b2e1a411f6d1609fed9234896293317dab05f65064da48b8f2b4a998eba532591d31882
9d0e52834 implements different disk sizes for different networks on intro (marcoagner)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/13213.
Mostly, I layed out the concept to open the PR for refinement and getting feedback if the approach is okay. Changes are expected.
Two points:
- The values for both new consts `TESTNET_BLOCK_CHAIN_SIZE` and `TESTNET_CHAIN_STATE_SIZE` is certainly not optimal; I just checked the size of my testnet3 related dirs and set them to little bit higher values. Which values should be used?
- Should we do something like this to regtest? Or these "niceties" do not matter when on regtest?
Thanks!
Tree-SHA512: 8ae87a29fa8356b899e7a823c76cde793d9126b4ee59554d7a2a8edb088fe42a19976b34c06c2fd4a98a727e1e4971dd983f42b6093ea6caa255b45004e22bb4
This adds a checksum in the gitian build script to make sure that
ossl tool and theuni's patch matches what is expected. Also changes
the url to use https and adds the same instructions to the release docs.
a62e667296 docs: Add more Doxygen information to Developer Notes (Jon Layton)
Pull request description:
Update information about Doxygen in `doc/developer-notes.md`.
Alternatively, this could have its own file (like `doc/web-documentation.md`), since there are installation steps included.
For example, I had to run:
```
brew install doxygen graphviz
```
on MacOS, otherwise failures occurred.
This information could also be linked to the `doc/release-process.md`.
Tree-SHA512: 5d77ee83e1b96fde036482b502f676a90a56f3f667753545a7cfba5c2e3b825644bb4cf0f8a84b7f9ba92fa5f2e1cd6ef1e27a94277f43d012355df741f7dd2f
3019ba28d1 Making supported operating systems more clear (Ben Carman)
Pull request description:
With the doc saying that we only support Windows 7+ stating that XP isn't supported is redundant and can be removed. Bitcoin stop supporting Windows XP in 0.13 so users should have had plenty of time to learn that XP is no longer supported.
Tree-SHA512: bbaaea205ea7ec9960198e70ded83e8f384c9b8c476ed873488635b8dfe28a482f8caa50df2fd818f226cdc936a21de087e95f0f1fd7f5ae17e7889ea0bea221
be5ca825a3 doc: update NetBSD build instructions for 8.0 (fanquake)
Pull request description:
Updates the NetBSD build documentation for 8.0.
Use Python37 and add pkg-config.
Switches to using our `contrib/install_db4.sh` script for installing bdb.
Tree-SHA512: c0ac1a89349a752d9d4d87e2d134fd402e9beaac84e471ec9a0b507ebc5e762e973c8d2821db3824dea82841e38c39b0bb0a0d97f7e58318f2b15e93e81bf654
eacff95de Add release notes (Pieter Wuille)
bdacbda25 Overhaul importmulti logic (Pieter Wuille)
Pull request description:
This is an alternative to #14558 (it will warn when fields are being ignored). In addition:
* It makes sure no changes to the wallet are made when an error in the input exists.
* It validates all arguments, and will fail if anything fails to parse.
* Adds a whole bunch of sanity checks
Tree-SHA512: fdee0b6aca8c643663f0bc295a7c1d69c1960951493b06abf32c58977f3e565f75918dbd0402dde36e508dc746c9310a968a0ebbacccc385a57ac2a68b49c1d0
d2ce315fbf [docs] add release note for change to GBT (John Newbery)
0025c9eae4 [mining] segwit option must be set in GBT (John Newbery)
Pull request description:
Calling getblocktemplate without the segwit rule specified is most
likely a client error, since it results in lower fees for the miner.
Prevent this client error by failing getblocktemplate if called without
the segwit rule specified.
Of the previous 1000 blocks (measured at block [551591 (hash 0x...173c811)](https://blockstream.info/block/000000000000000000173c811e79858808abc3216af607035973f002bef60a7a)), 991 included segwit transactions.
Tree-SHA512: 7933b073d72683c9ab9318db46a085ec19a56a14937945c73f783ac7656887619a86b74db0bdfcb8121df44f63a1d6a6fb19e98505b2a26a6a8a6e768e442fee
a46c8476e9 depends: disable unused qt features (fanquake)
73b46eeb7e depends: qt 5.9.7 (fanquake)
095e765975 depends: expat 2.2.6 (fanquake)
Pull request description:
This PR upgrades `expat` and `qt` in depends. The intention is to upgrade Qt in master to the latest point release of the current Qt LTS. This change can then be back-ported to the 0.17 branch (wether it makes it into 0.17.1 or not).
Then, sometime before the 0.18.0 release, we could move to using Qt 5.12+ in depends (which is also LTS). That discussion, as well as minimum supported Qt versions is in #13478.
### Qt 5.9.7
[Release announcement](https://blog.qt.io/blog/2018/10/23/qt-5-9-7-released/)
[Changelog](https://bugreports.qt.io/browse/QTBUG-70888?filter=20149)
### Expat 2.2.6
* Avoid doing arithmetic with NULL pointers in XML_GetBuffer
* Fix 2.2.5 regression with suspend-resume while parsing a document like <root/>
Full changelog [here](https://github.com/libexpat/libexpat/blob/R_2_2_6/expat/Changes)
a46c8476e9 disables a bunch of qt features we aren't currently using. This speeds up the qt depends build slightly (also decreases the size of the built `qt-5.9.7` tar by about 2%). The disabling is somewhat unintuitive, hence `[wip]` until after a travis run and gitian build.
Tree-SHA512: f3d51d0c7dabe5b7043ef23f264abf2aba3e94e55ffc9d5c323b153b6852d9161368e1591db3ba28f3498f0613bac77d40b855bd0465296f52be03f9230656de
9b51b158fc Add nice table to files.md (Emil Engler)
Pull request description:
I have added a nice table to the files.md in the documentation.
This looks way more better and lightweight than before.
[Screenshot](https://imgur.com/a/wJuQgZN)
Tree-SHA512: 0c59171531b99f3bc898108c7c570e9e8309e7011d6f3b3211b0200eb2354fd4c4211bba5950d450522523f346631e23b87201813337ed5849336d359c0e166d
a67d71311d [doc] developer-notes.md: point out that UniValue deviates from upstream (Sjors Provoost)
Pull request description:
While debugging an issue I was somewhat surprised to [learn](https://github.com/bitcoin/bitcoin/pull/14164#issuecomment-419752678) that we've moved `src/univalue` from https://github.com/jgarzik/univalue to https://github.com/bitcoin-core/univalue, that these repos are both maintained and they're different.
The first mention of using the bitcoin-core repo is from late 2015 in #7157. I didn't check when the last common ancestor commit is.
I couldn't find documentation as to why (these things just happen in open source of course), but at minimum we should make this more clear.
There's also the following line in `config.ac` that I'm not sure what to do with:
```
AC_INIT([univalue], [1.0.3],
[http://github.com/jgarzik/univalue/])
```
Tree-SHA512: e58105677b5ebe0005772282da4a805fee7dfccacfb1b2686a874517bf46072d1481181f8a8865d25526f6ed9e5fcd55d8d49906bf27cd0f5aefe4f258aa4d63
688f665a5e Scripts and tools & Docs: Used #!/usr/bin/env bash instead of obsolete #!/bin/bash, added linting for .sh files shebang and updated the Developer Notes. (vim88)
Pull request description:
As it was discussed in [#13510](https://github.com/bitcoin/bitcoin/pull/13510), it is better to use `#!/usr/bin/env bash` instead of `#!/bin/bash`.
Tree-SHA512: 25f71eb9a6a0cdc91568b5c6863205c5fe095f77a69e633503a2ac7805bd9013af8538e538c0c666ce96a28e3f43ce7a8df5f08d4ff007723bb588d85674f2da
6c6ee8af8 Less confusing documentation for `torpassword` (Chakib Benziane)
Pull request description:
Rebased & squashed #14609.
> The current documentation leads the reader to think hash-password is an other option.
This change is less confusing and make it clear how to use this option.
Tree-SHA512: b94223715f1d28a8218e501117faa103d7cc791333e6d9a40e9253756070316d41de73e3b4593cd1fa9e1823fa8e8de4938cf0de89117a6e4649401d877e3477
109699dd33 Add release notes (Pieter Wuille)
b65326b562 Add matching descriptors to scantxoutset output + tests (Pieter Wuille)
16203d5df7 Add descriptors to listunspent and getaddressinfo + tests (Pieter Wuille)
9b2a25b13f Add tests for InferDescriptor and Descriptor::IsSolvable (Pieter Wuille)
225bf3e3b0 Add Descriptor::IsSolvable() to distinguish addr/raw from others (Pieter Wuille)
4d78bd93b5 Add support for inferring descriptors from scripts (Pieter Wuille)
Pull request description:
This PR adds functionality to convert a script to a descriptor, given a `SigningProvider` with the relevant information about public keys and redeemscripts/witnessscripts.
The feature is exposed in `listunspent`, `getaddressinfo`, and `scantxoutset` whenever these calls are applied to solvable outputs/addresses.
This is not very useful on its own, though when we add RPCs to import descriptors, or sign PSBTs using descriptors, these strings become a compact and standalone way of conveying everything necessary to sign an output (excluding private keys).
Unit tests and rudimentary RPC tests are included (more relevant tests can be added once RPCs support descriptors).
Fixes#14503.
Tree-SHA512: cb36b84a3e0200375b7e06a98c7e750cfaf95cf5de132cad59f7ec3cbd201f739427de0dc108f515be7aca203652089fbf5f24ed283d4553bddf23a3224ab31f
The current documentation leads the reader to think `hash-password` is an other option.
This change is less confusing and make it clear how to use this option.
75a4bf699f Update release-process.md to include RC version bumping (Andrew Chow)
04b0bc7425 build: include rc number in version number (Andrew Chow)
895e6bbb22 build: if VERSION_BUILD is non-zero, include it in the package version (Andrew Chow)
Pull request description:
As noted on IRC, the filenames of the gitian build results do not contain the 4th digit of the version number if it has one, e.g. 0.17.0.1 produces files with the number 0.17.0. Furthermore, when RC's are built, the resulting filenames are of the release version and do not include `rc` in them. This occurs because `configure.ac` is written to create version numbers of the form `major.minor.rev` instead of `major.minor.rev.build` and without any rc version as it does not handle rc numbers.
This PR changes `configure.ac` to include the build number if it is greater than 0. It will also include the rc number if it is greater than 0. So the filenames of the gitian builds will now contain the full version number.
This behavior can be tested by setting `_CLIENT_VERSION_BUILD` and `_CLIENT_VERSION_RC` to non-zero values and then doing `make dist`. A tar file should be created with the correct versioning.
Tree-SHA512: b77990485f2c7770be897dc136737cd805306afff9882ebef7170741f363203587356ccf8bec83163268ace1bd77433fbd2ba8c213f993677bfb867d99a0bbe7
8284756705 A few minor formatting fixes and clarifications to descriptors.md (John Newbery)
Pull request description:
Fixes some markdown formatting issues, and also adds a few clarifications.
Tree-SHA512: b12fc94035c075a990756e22fb60b95e6c851c80c8a60fc8fc46b07c6749df4d257401889be4d930996432ac08850770077e667fe48473140f38b94c8e9eacdc
86cddf0856 doc: add detached release notes for #14060 (mruddy)
Pull request description:
Adding detached release notes for #14060 in order to assist with https://github.com/bitcoin/bitcoin/pull/14688.
Tree-SHA512: 170cd0b6ac27237f58875f301132e0695dee36eec5d90a0c1234c0fa9db125151e6cebd94e63e634ddc4ddcfb77d7a4a07434ffd3725cb0dfa13fc4ccfbde2a0
ba8f0c6c8d Release notes: integrate detached release notes (David A. Harding)
6062f0e613 Release notes: update notes through to 11e1ac3ae0 (David A. Harding)
Pull request description:
This documents changes listed by `git log v0.17.0...11e1ac3 --merges` and integrates the existing detached release notes into the main file.
My goal is to update the release notes each month in order to reduce the amount of writing and review that needs to be done all at once near the start of the RC cycle.
Note: I've chosen to use fully-qualified URLs for linking to documentation, rather than shorter relative URLs that would otherwise be preferred, as the release notes are commonly copied into emails, reddit threads, and blog posts where relative URLs would be incomplete or would point to the wrong page.
Tree-SHA512: a943327d48e166f4a188ab0f468972609276e9c8f0ed85513823511ed989606445bf6b0ae9dd693b5d1e13d2f98c13573acd13865c57fe9c8ee9dbd04ceeff7f
a6b5ec18f rpc: creates possibility to preserve labels on importprivkey (marcoagner)
Pull request description:
Closes#13087.
As discussed in the issue, this is a feature request instead of a bug report since the behaviour was as intended (i.e. label with default: `''`). With this, the old behaviour is kept while the possibility to achieve the preservation of labels, as expected in the open issue, is added.
Tree-SHA512: b33be50e1e7f62f7ddfae953177ba0926e2d848961f9fac7501c2b513322c0cb95787745d07d137488267bad1104ecfdbe800c6747f94162eb07c976835c1386
a4edb168b6 ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
33ae985912 doc: Update OpenBSD build guide for 6.4 (fanquake)
6d247b1148 gitignore contents of db4 folder (Marty Jones)
Pull request description:
Includes a commit from #14314.
The `disable-dependency-tracking ` workaround is still required to run `./configure` (cc #14404).
`gmake check -j4` pass.
`src/bitcoind` runs and "starts" syncing.
Tree-SHA512: 72d78eb0d94fc4f2bbcf901d867f10f0e85d8a4f43969c598953278343ed826a26d1ebe6772dcc0fbd1fc608e88b7c86e31656232c1efb0656c537176fb9de4c
14a06525b2 tests: add test for 'getaddressinfo' RPC result 'ischange' field (whythat)
93d1aa9abc rpcwallet: add 'ischange' field to 'getaddressinfo' response (whythat)
Pull request description:
Implementation of proposal in #14396.
This introduces `CWallet::IsChange(CScript&)` method and replaces original `CWallet::IsChange(CTxOut&)` method with overloaded version that delegates to the new method with *txout*'s `scriptPubKey`. In this way `TODO` note from the original method can still be addressed in a single place.
Tree-SHA512: ef5dbc82d76b4b9b2fa6a70abc3385a677c55021f79e187ee2f392ee32bc6b406191f4129acae5c17b0206e72b6712e7e0cad574a4bbd966871c2e656c45e041
9605bbd315 Make clear function argument case in dev notes (Carl Dong)
Pull request description:
Rationale:
For new developers, they might be confused if they see that function arguments are sometimes `camelCase`'d in the codebase. This makes it clear that they _should_ be `snake_case`'d (maybe because no one's gotten to fixing them yet).
Tree-SHA512: 9db16d1fedf9761121844a0865ae3fefea94b5dbdfb36cb18f99cbc73e117f7d798a019f28a1c8bca19772502de2f9ed063f03bd911ffc4d248ec7386cd87d97
0a04667613 FreeBSD: Document Python 3 requirement for 'gmake check' (Murray Nesbitt)
Pull request description:
`doc/build-freebsd.md` doesn't mention that Python 3 is required to run the test suite. Currently, `gmake check` fails without it.
Tree-SHA512: 19117671bf528d335146d821e5cd4108f2f6ae014fb9a6d0030a322b23d1bc5f677e46896b575a7ca78b137315b60e63ad8b03ad695fe0aae3e9f50b060a3561
c11875c590 Add segwit address tests for importmulti (MeshCollider)
201451b1ca Make getaddressinfo return solvability (MeshCollider)
1753d217ea Add release notes for importmulti segwit change (MeshCollider)
353c064596 Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf0 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
5918204304 Removed explicit mention of storage requirement (squashed) (Martin Erlandsson)
Pull request description:
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Tree-SHA512: 3d1e0b1e70c2e2a5003f437c7deba8bc72f487852948c298db154aaf29184fa407e122ab7fdff9bfb4e52cc6062bc2d2122bbbdf805283aed21aa685cf29681c
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Removed mention of storage requirement
Agreeing with @laanwj that this mention of the storage requirement could be removed, I did so and changed the wording accordingly.
Would be nice to be able to add a link to a canonical source that is always updated, for those who want a number.
Update doc/README.md
Co-Authored-By: merland <martin@megabit.se>
Update README.md
added a missing 'a'
eeeaa29214 descriptors.md: Refer to descriptors as describing instead of matching (Russell Yanofsky)
eb49412562 doc/descriptors.md tweaks (Russell Yanofsky)
Pull request description:
Add some implementation details, and tweak phrasing in examples section to be more explicit about how expressions are used for matching.
Tree-SHA512: a9dc7bc0fc370548189a789f31c04bd11103cdd2a99bcb909fa1b1dfa4e78509813dad5d5c9e3db98d66929f45cb5704f5c46ab4cbd800fef22cd8465f80ef33
1fb3c167c3 Add `doc/bitcoin-conf.md` (Hennadii Stepanov)
Pull request description:
From the IRC:
> 2018-10-16T05:35:03 \<wumpus\> if something can be solved by better documentation, please work on documentation!
> 2018-10-16T05:35:12 \<wumpus\> don't change the code instead
Refs:
- #14370
- #14427
- #14494
Based on the BITCOIN.CONF(5) manual page written by Micah Anderson \<micah@debian.org\> for the Debian system.
Tree-SHA512: 16393c9073c027fa1c46f8b59651e60b9a3159b3aeb9b3102040c292d2787f32b1ead5977957ac3ac0759a4bf626650a2325b68ad84320964ac089ffc2d3b4f4
b6b9915318 Textual improvements (Martin Erlandsson)
Pull request description:
Just added a few commas in the right places, to increase readability.
(Also, getting my feet wet in regards to the contribution process...)
Tree-SHA512: 9281af792436efe916e898b34fe20e909291d0c0917e8ccdc4a2af78cf9b6ba7736c554e53b6dbe1d9392b7583b33c3d77b769ab6424c3d7a65513535811878c
d56a068935 docs: Add release notes for listwalletdir RPC (João Barbosa)
0cb3cad166 qa: Add tests for listwalletdir RPC (João Barbosa)
cc3377360c rpc: Add listwalletdir RPC (João Barbosa)
d1b03b8e5f interfaces: Add getWalletDir and listWalletDir to Node (João Barbosa)
fc4db35bfd wallet: Add ListWalletDir utility (João Barbosa)
Pull request description:
`ListWalletDir` returns all available wallets in the current wallet directory.
Based on MeshCollider work in pull #11485.
Tree-SHA512: 5843e3dbd1e0449f55bb8ea7c241a536078ff6ffcaad88ce5fcf8963971d48c78600fbc4f44919523b8a92329d5d8a5f567a3e0ccb0270fdd27366e19603a716
3b706212ad doc: RPC documentation (Karel Bílek)
Pull request description:
The auto-generated RPC docs seem to work so far ( https://bitcoincore.org/en/doc/ + 0.17.0 https://github.com/bitcoin-core/bitcoincore.org/pull/618 ). There are some problems (the design of the list on the right is not ideal, and apparently the huge list of pages slows down jekyll), but that can be fixed later; people are already linking to the docs now and looking for them there
So I am adding the RPC docs to the release process.
The script is here and it is written in golang, since I am most confident in the language; if necessary, I can try to rewrite to python, which is more common in bitcoin tooling
https://github.com/bitcoin-core/bitcoincore.org/tree/master/contrib/doc-gen
Tree-SHA512: ba1b7696bb7ceb6cee4ff222b006b8c18768dd9283a4130751714a782d75ea2ca33f8d9fc4a5263d85a2f001c254daa0cee3b09cc7cba7366c66c5a115d8352a
- Creates m_assumed_blockchain_size and m_assumed_chain_state_size on CChainParams.
- Implements access to CChainParams' m_assumed_blockchain_size and m_assumed_chain_state_size on node interface.
- Implements m_assumed_blockchain_size and m_assumed_chain_state_size on qt/intro via node interface.
- Updates release process document with the new CChainParam's values.
- changes importprivkey behavior to overwrite existent label if one
is passed and keep existing ones if no label is passed
- tests behavior of importprivkey on existing address labels and
different same key destination
