fa05d52af4 test: Bump timeout to run tests in travis thread sanitizer (MarcoFalke)
Pull request description:
No need to exclude tests because their timeout was set too strict
Tree-SHA512: ea7032e674a66456bab40122adf4beebd703fd626a7567ca76d2a4e78041af115564d863dc7f742d39bd4adb249c29751439a1238d5e5c34e474c7221d4fd6e1
f3f6dde56e Test coinbase category in wallet rpcs (andrewtoth)
e982f0b682 Add all category options to wallet rpc help (andrewtoth)
Pull request description:
The current helptext for `listtransactions`, `listsinceblock` and `gettransaction` only list two of the five possible options for `category`. This incorrectly implies that these are the only two options, and can cause problems if the other three options aren't accounted for. Also, some of the documentation is incorrect when specifying which options are returned for which categories.
This PR updates the helptext for these RPCs and adds a functional regression test for the cases when the other three categories are returned.
Tree-SHA512: 67dd7ff6269a3b0f17f5d1a61b0ae1fb1f3778f05e1c440bfbb9b3a005c9c6d740abcace20f3d597cf2bd6779c494448690f13fab0bd2340f206213bc7890b51
eaf4070e3a Add suppression for InterruptRPC (fRPCRunning) data race (practicalswift)
5e5138a721 travis: Use trap and set -e errtrace (Chun Kuan Lee)
069752b726 build: Enable functional tests in the ThreadSanitizer (TSan) build job (practicalswift)
Pull request description:
Enable functional tests in the ThreadSanitizer (TSan) build job.
This is a follow-up to @MarcoFalke's #14764 which added TSan but for unit tests only.
Tree-SHA512: dcc24d311fa124772c3036b16c2bf94732ece36c3e22b4bb8fe941772e52157ab2b1a90b1880b81079c2eef2d344ca7e1da58324b75dbf82d16204d591ad49fb
faee59103d test: Fix race in mempool_accept (MarcoFalke)
Pull request description:
If we happen to pick the same random coin to spend, there would be mempool conflicts in some runs of the test. Fix that by popping from a static list of coins to spend from.
Tree-SHA512: f6fd37e43d919371aa8bc3a2c93b569f9169961fe702f3641bb63180c3a88f12ca1857e9ed4d3723d5f04ca8ab5ef009a90e679580f36246a10b987620a55bee
fa4b8c90d3 test: add_nodes can only be called once after set_test_params (MarcoFalke)
faa831102a Revert "tests: Support calling add_nodes more than once" (MarcoFalke)
Pull request description:
Writing tests should be straightforward and with little side-effects as possible.
I don't see how this is needed and can not be achieved with `self.num_nodes` (and `self.extra_args` et al.)
Tree-SHA512: 83a67f2cba9d97e21d80847ff405a4633fcb0d5674486efa57ee1813e46efe8709ae0fb462b8339a01ebeca5c4f2d29ecb1807d648b8fd9ee8ce336b08d580a8
4de11a3682 Remove Python 2 import workarounds (practicalswift)
Pull request description:
Remove Python 2 import workarounds.
As noted by @jnewbery in https://github.com/bitcoin/bitcoin/pull/14903#discussion_r241396925:
> This exception handling is a vestige from when github-merge.py supported Python 2 and Python 3. We only support Python 3 now so we should be able to remove it entirely and just import from urllib.request.
Tree-SHA512: e0d21e6299dd62fb669ad95cbd3d19f7c803195fd336621aac72fd10ddc7431d90443831072a2e1eb2fc880d1d88eb7c3e2ead3da59f545f6db07d349af98fb3
98a1846b00 tests: Support calling add_nodes more than once (Steven Roose)
Pull request description:
Ran into this while writing [a multi-chain test for Elements](https://github.com/ElementsProject/elements/pull/458) where I call this method more than once.
Tree-SHA512: f2d698fcb560552aa5d81a4c3fbf40b7269b228b34d85a118291649ef83f8c0a30cd82a28d418237b55893bcecd538046b704e64a4d8a41f2c0aef8033dc83e5
aaaa8eb1ed test: consensus: Check that final transactions are valid (MarcoFalke)
fae3617d79 test: Correctly deserialize without witness (MarcoFalke)
Pull request description:
There is no check that checks that final transactions are valid, i.e. the consensus rules could be changed (accidentally) with none of the tests failing.
Tree-SHA512: 48f4c24bfcc525ddbc1bfe8c37131953b464823428c1f7a278ba6d98b98827b6b84a8eb2b33396bfb5b8cc4012b7cc1cd771637f405ea20beddae001c22aa290
31926ee8cf [test] functional framework: add CScript hex() for Python 3.4 (Sjors Provoost)
74ce326831 [test] Travis: enforce Python 3.4 support in functional tests (Sjors Provoost)
Pull request description:
The minimum supported version of Python is 3.4 according to [dependencies.md](https://github.com/bitcoin/bitcoin/blob/master/doc/dependencies.md). This PR makes the Travis linter use this version in order to catch accidental use of modern syntax.
Tree-SHA512: 71b2c102be72b135a8ba049378d66875760f20a04a657102a399240c5c2b2ddbdfa7d5ab4c0c0242ecc3259e0ee8eb2273f331bc5eb824f4ae4c3cc58aea37ac
Make lint/check-doc.py Python 3.4 compatible.
Also add .python-version for pyenv which will cause tests with too
modern syntax to fail on developer machine rather than on Travis.
ee3b21dccb [tests] Add docstring for wallet_importmulti.py (John Newbery)
fbdba40594 [tests] add test_address method to wallet_import.py (John Newbery)
fd3a02c381 [tests] add test_importmulti method to wallet_import.py (John Newbery)
08a4a0f70f [tests] add get_multisig function to wallet_importmulti.py (John Newbery)
7c99614b40 [tests] add get_key function to wallet_importmulti.py (John Newbery)
e5a8ea8f14 [tests] tidy up imports in wallet_importmulti.py (John Newbery)
cb41ade6b1 [tests] fix flake8 warnings in wallet_importmulti.py (John Newbery)
Pull request description:
https://github.com/bitcoin/bitcoin/pull/14565 needs test coverage. This PR refactors wallet_importmulti.py to the following pattern:
1. Add `get_key()` and `get_multisig()` methods, which generate keys on node0 and return the priv/pubkeys and all scriptPubKey and address variants.
2. Add `test_importmulti()` method, which takes an importmulti request, sends it to node1 and tests against success and error codes/messages.
3. Add `test_address()` method, which takes an address, sends it as a getaddressinfo request to node1 and tests the values returned.
This does not add any specific testing for #14565, but makes it very straightforward to add that testing: `test_importmulti()` can be easily updated to test for returned warnings, and `test_address()` can be called multiple times against the different address variants for a singlesig/multisig.
Tree-SHA512: e0ae9d3436f0b4eec4f6b9bdc0f02aef49c5a16bbac319fd47b2cfcaf01d01780d7b296280e8760686a57fac63275eec09e2959d8aaeceae1b406d8eff768435
0dcac51049 wallet_keypool_topup.py: Test for all keypool address types (Gregory Sanders)
Pull request description:
To protect against regressions if key scanning is changed.
Tree-SHA512: d1c4bb033bafd97203a3f68fb262a501442be947907d67902f0391fbdec39c095196403c7675e602806cc68d7e2d1f552ab339a58346162379978d06dad1c4bb
d6b3790d1a tests: check readability of cookie file (Chun Kuan Lee)
Pull request description:
This PR would wait until the `.cookie` file is readable
Possible fix no. 5 `PermissionError` in #14446
Tree-SHA512: e7055c7ca26a6eadbbe19e4eef08ffee61cd17de79b30af2f0d090f0ad81ca24815e3c7e034e5e30d47c580bb0b221b3955e9ff2fcec2274fbf7b9232ab0cdc7
5c40e7b91a test: allows test_runner command line to receive parameters for each test (marcoagner)
Pull request description:
Fixes#14791.
Seems to address the asked behaviour in a simple way, but could address more if a more complex behaviour is found to be needed (e.g. call `rpc_bind --ipv4` without the ".py" and have it added).
Tree-SHA512: d7e21dd0ada36dd97dac71196bb97702a92986b181beb3753e37e3294b899fb65129aff5f9a45fe92b06fbf7c74e605ccb87a422f874f7a85d30401f4c2228c8
28479f926f qa: Test bitcond shutdown (João Barbosa)
8d3f46ec39 http: Remove timeout to exit event loop (João Barbosa)
e98a9eede2 http: Remove unnecessary event_base_loopexit call (João Barbosa)
6b13580f4e http: Unlisten sockets after all workers quit (João Barbosa)
18e9685816 http: Send "Connection: close" header if shutdown is requested (João Barbosa)
02e1e4eff6 rpc: Add wait argument to stop (João Barbosa)
Pull request description:
Fixes#11777. Reverts #11006. Replaces #13501.
With this change the HTTP server will exit gracefully, meaning that all requests will finish processing and sending the response, even if this means to wait more than 2 seconds (current time allowed to exit the event loop).
Another small change is that connections are accepted even when the server is stopping, but HTTP requests are rejected. This can be improved later, especially if chunked replies are implemented.
Briefly, before this PR, this is the order or events when a request arrives (RPC `stop`):
1. `bufferevent_disable(..., EV_READ)`
2. `StartShutdown()`
3. `evhttp_del_accept_socket(...)`
4. `ThreadHTTP` terminates (event loop exits) because there are no active or pending events thanks to 1. and 3.
5. client doesn't get the response thanks to 4.
This can be verified by applying
```diff
// Event loop will exit after current HTTP requests have been handled, so
// this reply will get back to the client.
StartShutdown();
+ MilliSleep(2000);
return "Bitcoin server stopping";
}
```
and checking the log output:
```
Received a POST request for / from 127.0.0.1:62443
ThreadRPCServer method=stop user=__cookie__
Interrupting HTTP server
** Exited http event loop
Interrupting HTTP RPC server
Interrupting RPC
tor: Thread interrupt
Shutdown: In progress...
torcontrol thread exit
Stopping HTTP RPC server
addcon thread exit
opencon thread exit
Unregistering HTTP handler for / (exactmatch 1)
Unregistering HTTP handler for /wallet/ (exactmatch 0)
Stopping RPC
RPC stopped.
Stopping HTTP server
Waiting for HTTP worker threads to exit
msghand thread exit
net thread exit
... sleep 2 seconds ...
Waiting for HTTP event thread to exit
Stopped HTTP server
```
For this reason point 3. is moved right after all HTTP workers quit. In that moment HTTP replies are queued in the event loop which keeps spinning util all connections are closed. In order to trigger the server side close with keep alive connections (implicit in HTTP/1.1) the header `Connection: close` is sent if shutdown was requested. This can be tested by
```
bitcoind -regtest
nc localhost 18443
POST / HTTP/1.1
Authorization: Basic ...
Content-Type: application/json
Content-Length: 44
{"jsonrpc": "2.0","method":"stop","id":123}
```
Summing up, this PR:
- removes explicit event loop exit — event loop exits once there are no active or pending events
- changes the moment the listening sockets are removed — explained above
- sends header `Connection: close` on active requests when shutdown was requested which is relevant when it's a persistent connection (default in HTTP 1.1) — libevent is aware of this header and closes the connection gracefully
- removes event loop explicit break after 2 seconds timeout
Tree-SHA512: 4dac1e86abe388697c1e2dedbf31fb36a394cfafe5e64eadbf6ed01d829542785a8c3b91d1ab680d3f03f912d14fc87176428041141441d25dcb6c98a1e069d8
688f665a5e Scripts and tools & Docs: Used #!/usr/bin/env bash instead of obsolete #!/bin/bash, added linting for .sh files shebang and updated the Developer Notes. (vim88)
Pull request description:
As it was discussed in [#13510](https://github.com/bitcoin/bitcoin/pull/13510), it is better to use `#!/usr/bin/env bash` instead of `#!/bin/bash`.
Tree-SHA512: 25f71eb9a6a0cdc91568b5c6863205c5fe095f77a69e633503a2ac7805bd9013af8538e538c0c666ce96a28e3f43ce7a8df5f08d4ff007723bb588d85674f2da
43f9099901 scripted-diff: Run scripted-diff in subshell (Carl Dong)
Pull request description:
scripted-diffs should be run in subshells so that their execution does not
affect the shell variables of commit-script-check. Shell variables are not
unset before evaluating the scripted-diff, so that they might be used in
the subshell. To this end, the variable previously named i is now more
descriptively named commit, this also allows scripted-diffs to use the
commonly used variable i without fear of losing a reference to the
commit.
Tree-SHA512: 0d86c069c2a978ca07d71bcd2b1b273e9bfabfe7e31a50c7b1b860e04f178b81c65814c3a38fb01e50b41a5065b646f0dab5b05d9be71138e72d4baba607e37b
48b37db50 make peertimeout a debug argument, remove error message translation (Zain Iqbal Allarakhia)
8042bbfbf p2p: allow p2ptimeout to be configurable, speed up slow test (Zain Iqbal Allarakhia)
Pull request description:
**Summary:**
1. _Primary_: Adds a `debug_only=true` flag for peertimeout, defaults to 60 sec., the current hard-coded setting.
2. _Secondary_: Drastically speeds up `p2p_timeout.py` test.
3. _Secondary_: Tests that the correct code path is being tested by adding log assertions to the test.
**Rationale:**
- P2P timeout was hard-coded: make it explicitly specified and configurable, instead of a magic number.
- Addresses #13518; `p2p_timeout.py` takes 4 sec. to run instead of 61 sec.
- Makes `p2p_timeout.py` more explicit. Previously, we relied on a comment to inform us of the timeout amount being tested. Now it is specified directly in the test via passing in the new arg; `-peertimeout=3`.
- Opens us up to testing more P2P scenarios; oftentimes slow tests are the reason we don't test.
**Locally verified changes:**
_With Proposed Change (4.7 sec.):_
```
$ time ./test/functional/p2p_timeouts.py
2018-11-19T00:04:19.077000Z TestFramework (INFO): Initializing test directory /tmp/testhja7g2n7
2018-11-19T00:04:23.479000Z TestFramework (INFO): Stopping nodes
2018-11-19T00:04:23.683000Z TestFramework (INFO): Cleaning up /tmp/testhja7g2n7 on exit
2018-11-19T00:04:23.683000Z TestFramework (INFO): Tests successful
real 0m4.743s
```
_Currently on master (62.8 sec.):_
```
$ time ./test/functional/p2p_timeouts.py
2018-11-19T00:06:10.948000Z TestFramework (INFO): Initializing test directory /tmp/test6mo6k21h
2018-11-19T00:07:13.376000Z TestFramework (INFO): Stopping nodes
2018-11-19T00:07:13.631000Z TestFramework (INFO): Cleaning up /tmp/test6mo6k21h on exit
2018-11-19T00:07:13.631000Z TestFramework (INFO): Tests successful
real 1m2.836s
```
_Error message demonstrated for new argument `-peertimeout`:_
```
$ ./bitcoind -peertimeout=-5
...
Error: peertimeout cannot be configured with a negative value.
```
Tree-SHA512: ff7a244ebea54c4059407bf4fb86465714e6a79cef5d2bcaa22cfe831a81761aaf597ba4d5172fc2ec12266f54712216fc41b5d24849e5d9dab39ba6f09e3a2a
2012d4df2 Add CScriptNum decode python implementation in functional suite (Gregory Sanders)
Pull request description:
I needed this for reasons and thought it'd be good to upsteam it.
Tree-SHA512: 6ea89fa2a5f5a7759ba722f2b4ed5cd6423ebfff4e83ac8b8b5c935e6aa479684e626c5f41fa020816d2a9079a99af5564e30808594d5c13e3b51ec9b474926d
