When the peer code was refactored, the lists of peers were converted to
maps however the code which runs when a peer disconnects still iterates
them like a slice. This is no longer necessary since they are maps
which means the peer can simply be looked up by its ID.
Also, the old code was comparing the map entry and the peer being
removed by their pointers which could lead to potentially not properly
finding the peer. This issue is also resolved by this change since it
looks up the peer by its ID.
This modifies the IP parsing code to work with IPv6 zone ids. This is
needed since the net.ParseIP function does not allow zone ids even
though net.Listen does.
This commit introduces package peer which contains peer related features
refactored from peer.go.
The following is an overview of the features the package provides:
- Provides a basic concurrent safe bitcoin peer for handling bitcoin
communications via the peer-to-peer protocol
- Full duplex reading and writing of bitcoin protocol messages
- Automatic handling of the initial handshake process including protocol
version negotiation
- Automatic periodic keep-alive pinging and pong responses
- Asynchronous message queueing of outbound messages with optional
channel for notification when the message is actually sent
- Inventory message batching and send trickling with known inventory
detection and avoidance
- Ability to wait for shutdown/disconnect
- Flexible peer configuration
- Caller is responsible for creating outgoing connections and listening
for incoming connections so they have flexibility to establish
connections as they see fit (proxies, etc.)
- User agent name and version
- Bitcoin network
- Service support signalling (full nodes, bloom filters, etc.)
- Maximum supported protocol version
- Ability to register callbacks for handling bitcoin protocol messages
- Proper handling of bloom filter related commands when the caller does
not specify the related flag to signal support
- Disconnects the peer when the protocol version is high enough
- Does not invoke the related callbacks for older protocol versions
- Snapshottable peer statistics such as the total number of bytes read
and written, the remote address, user agent, and negotiated protocol
version
- Helper functions for pushing addresses, getblocks, getheaders, and
reject messages
- These could all be sent manually via the standard message output
function, but the helpers provide additional nice functionality such
as duplicate filtering and address randomization
- Full documentation with example usage
- Test coverage
In addition to the addition of the new package, btcd has been refactored
to make use of the new package by extending the basic peer it provides to
work with the blockmanager and server to act as a full node. The
following is a broad overview of the changes to integrate the package:
- The server is responsible for all connection management including
persistent peers and banning
- Callbacks for all messages that are required to implement a full node
are registered
- Logic necessary to serve data and behave as a full node is now in the
callback registered with the peer
Finally, the following peer-related things have been improved as a part
of this refactor:
- Don't log or send reject message due to peer disconnects
- Remove trace logs that aren't particularly helpful
- Finish an old TODO to switch the queue WaitGroup over to a channel
- Improve various comments and fix some code consistency cases
- Improve a few logging bits
- Implement a most-recently-used nonce tracking for detecting self
connections and generate a unique nonce for each peer
Also, update TravisCI goclean script to remove the special casing which
ignored 'Id' from the lint output since that exception is no longer
needed. It was previously required due to the old version of btcjson,
but that is no longer in the repo.
Introduce an ECDSA signature verification into btcd in order to
mitigate a certain DoS attack and as a performance optimization.
The benefits of SigCache are two fold. Firstly, usage of SigCache
mitigates a DoS attack wherein an attacker causes a victim's client to
hang due to worst-case behavior triggered while processing attacker
crafted invalid transactions. A detailed description of the mitigated
DoS attack can be found here: https://bitslog.wordpress.com/2013/01/23/fixed-bitcoin-vulnerability-explanation-why-the-signature-cache-is-a-dos-protection/
Secondly, usage of the SigCache introduces a signature verification
optimization which speeds up the validation of transactions within a
block, if they've already been seen and verified within the mempool.
The server itself manages the sigCache instance. The blockManager and
txMempool respectively now receive pointers to the created sigCache
instance. All read (sig triplet existence) operations on the sigCache
will not block unless a separate goroutine is adding an entry (writing)
to the sigCache. GetBlockTemplate generation now also utilizes the
sigCache in order to avoid unnecessarily double checking signatures
when generating a template after previously accepting a txn to the
mempool. Consequently, the CPU miner now also employs the same
optimization.
The maximum number of entries for the sigCache has been introduced as a
config parameter in order to allow users to configure the amount of
memory consumed by this new additional caching.
SFNodeBloom is a new service flag that a node is required to use to
indicate that it supports bloom filtering. This includes a protocol
version bump to 70011 and a wire version bump to 0.3.0.
btcd:
The SFNodeBloom flag is set by default. A new configuration option
--nopeerbloomfilters has been added to to disable bloom filtering.
Any node advertising a version greater than or equal to 70011 that
attempts to use bloom filtering will be disconnected if bloom
filtering is disabled.
This mimics Bitcoin Core commit afb0ccaf9c9e4e8fac7db3564c4e19c9218c6b03
The comment says "only allow recent nodes (10mins) after we failed 30 times",
but the server actually did the opposite and allowed only recent nodes before
30 failed connection attempts. This corrects the server's behavior.
This commit correctly replaces persistent peers that are being retried in
the list of persistent peers so it will continue to be retried as
intended.
Also, limit the maximum retry interval for persistent peers to 5 minutes.
Fixes#463.
* The cases for the 'addnode' command were previously
stacked on top the new cases for the 'node' command.
The intended behavior was to create a fall through and
handle both commands. However, trying to use this
syntax with a type switch caused the first case to be
ignored.
* addnode' specific functions and structs in the server
have been removed. Instead, the 'add' and 'del' subcommands
are now proxied to the matching 'node' cmd functions.
* Gives node operators full control of peer connectivity
* RPC adds ability to disconnect all matching non-persistent peers,
remove persistent peers, and connect to peers making them either
temporary or persistent.
This change was suggested as Countermeasure 2 in
Eclipse Attacks on Bitcoin's Peer-to-Peer Network, Ethan
Heilman, Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive
Report 2015/263. March 2015.
This mimics Bitcoin Core commit c6a63ceeb4956933588995bcf01dc3095aaeb1fc
This commit contains three classes of optimizations:
- Reducing the number of unnecessary hash copies
- Improve the performance of the DoubleSha256 function
- A couple of minor optimizations of the ShaHash functions
The first class is a result of the Bytes function on a ShaHash making a
copy of the bytes before returning them. It really should have been named
CloneBytes, but that would break the API now.
To address this, a comment has been added to the function which explicitly
calls out the copy behavior. In addition, all call sites of .Bytes on a
ShaHash in the code base have been updated to simply slice the array when
a copy is not needed. This saves a significant amount of data copying.
The second optimization modifies the DoubleSha256 function to directly use
fastsha256.Sum256 instead of the hasher interface. This reduces the
number of allocations needed. A benchmark for the function has been added
as well.
old: BenchmarkDoubleSha256 500000 3691 ns/op 192 B/op 3 allocs/op
new: BenchmarkDoubleSha256 500000 3081 ns/op 32 B/op 1 allocs/op
The final optimizations are for the ShaHash IsEqual and SetBytes functions
which have been modified to make use of the fact the type is an array and
remove an unneeded subslice.
In order to avoid prior situations of stalled syncs due to
outdated peer height data, we now update block heights up peers in
real-time as we learn of their announced
blocks.
Updates happen when:
* A peer sends us an orphan block. We update based on
the height embedded in the scriptSig for the coinbase tx
* When a peer sends us an inv for a block we already know
of
* When peers announce new blocks. Subsequent
announcements that lost the announcement race are
recognized and peer heights are updated accordingly
Additionally, the `getpeerinfo` command has been modified
to include both the starting height, and current height of
connected peers.
Docs have been updated with `getpeerinfo` extension.
This commit converts the RPC server over to use the new features available
in the latest version of btcjson and improve a few things along the way.
This following summarizes the changes:
- All btcjson imports have been updated to the latest package version
- The help has been significantly improved
- Invoking help with no command specified now provides an alphabetized
list of all supported commands along with one-line usage
- The help for each command is automatically generated and provides much
more explicit information such as the type of each parameter, whether
or not it's optional or required, etc
- The websocket-specific commands are now provided when accessing the
help when connected via websockets
- Help has been added for all websocket-specific commands and is only
accessible when connected via websockets
- The error returns and handling of both the standard and websocket
handlers has been made consistent
- All RPC errors have been converted to the new RPCError type
- Various variables have been renamed for consistency
- Several RPC errors have been improved
- The commands that are marked as unimplemented have been moved into the
separate map where they belong
- Several comments have been improved
- An unnecessary check has been removed from the createrawtransaction
handler
- The command parsing has been restructured a bit to pave the way for
JSON-RPC 2.0 batching support
* Address index is built up concurrently with the `--addrindex` flag.
* Entire index can be deleted with `--dropaddrindex`.
* New RPC call: `searchrawtransaction`
* Returns all transacitons related to a particular address
* Includes mempool transactions
* Requires `--addrindex` to be activated and fully caught up.
* New `blockLogger` struct has been added to factor our common logging
code
* Wiki and docs updated with new features.
* When an inv is to be sent to the server for relaying, the sender
already has access to the underlying data. So
instead of requiring the relay to look up the data by
hash, the data is now coupled in the request message.
This commit uses the new MedianTimeSource API in btcchain to create a
median time source which is stored in the server and is fed time samples
from all remote nodes that are connected. It also modifies all call sites
which now require the the time source to pass it in.
This ensures we backoff when reconnecting to peers for which we don't
understand the replies, just like we do for peers we fail to connect to.
Closes#103
This commit implements full support for filtering based on the filterload,
filteradd, filterclear, and merkleblock messages introduced by BIP0037.
This allows btcd to work seamlessly with SPV wallets such as BitcoinJ.
Original code by @dajohi. Cleanup, bug fixes, and polish by @davecgh.
These changes are a joint effort between myself and @dajohi.
- Separate IP address range/network code into its own file
- Group all of the RFC range declarations together
- Introduces a new unexported function to simplify the range declarations
- Add comments for all exported functions
- Use consistent variable casing in refactored code
- Add initial doc.go package overview
- Bump serialize interval to 10 minutes
- Correct GroupKey to perform as intended
- Make AddLocalAddress return error instead of just a debug message
- Add tests for AddLocalAddress
- Add tests for GroupKey
- Add tests for GetBestLocalAddress
- Use time.Time to improve readability
- Make address manager code golint clean
- Misc cleanup
- Add test coverage reporting
This commit does just enough to move the address manager into its own
package. Since it was not originally written as a package, it will
require a bit of refactoring and cleanup to turn it into a robust
package with a friendly API.
By putting each DNS seed in its own go routine, btcd can start connecting
to nodes as they are found instead of waiting for all seeds to respond. This
significantly speeds up startup time.
Additionally, logging was added to show how many addresses were fetched from
each seed.
This commits removes a number of golint warnings. There is a class of
warnings which I can't fix due to unsufficient knowledge of the domain
at this point. These are listed here:
addrmanager.go:907:1: comment on exported method AddrManager.Attempt
should be of the form "Attempt ..."
addrmanager.go:1048:1: exported function RFC1918 should have comment or
be unexported
addrmanager.go:1058:1: exported function RFC3849 should have comment or
be unexported
addrmanager.go:1065:1: exported function RFC3927 should have comment or
be unexported
addrmanager.go:1073:1: exported function RFC3964 should have comment or
be unexported
addrmanager.go:1081:1: exported function RFC4193 should have comment or
be unexported
addrmanager.go:1089:1: exported function RFC4380 should have comment or
be unexported
addrmanager.go:1097:1: exported function RFC4843 should have comment or
be unexported
addrmanager.go:1105:1: exported function RFC4862 should have comment or
be unexported
addrmanager.go:1113:1: exported function RFC6052 should have comment or
be unexported
addrmanager.go:1121:1: exported function RFC6145 should have comment or
be unexported
addrmanager.go:1128:1: exported function Tor should have comment or be
unexported
addrmanager.go:1143:1: exported function Local should have comment or be
unexported
addrmanager.go:1228:2: exported const InterfacePrio should have comment
(or a comment on this block) or be unexported
discovery.go:26:2: exported var ErrTorInvalidAddressResponse should have
comment or be unexported
limits/limits_unix.go:19:1: exported function SetLimits should have
comment or be unexported
limits/limits_windows.go:7:1: exported function SetLimits should have
comment or be unexported
util/dropafter/dropafter.go:22:6: exported type ShaHash should have
comment or be unexported
util/dropafter/dropafter.go:38:2: exported const ArgSha should have
comment (or a comment on this block) or be unexported
util/dropafter/dropafter.go:128:5: exported var ErrBadShaPrefix should
have comment or be unexported
util/dropafter/dropafter.go:129:5: exported var ErrBadShaLen should have
comment or be unexported
util/dropafter/dropafter.go:130:5: exported var ErrBadShaChar should
have comment or be unexported
util/showblock/showblock.go:24:6: exported type ShaHash should have
comment or be unexported
util/showblock/showblock.go:46:2: exported const ArgSha should have
comment (or a comment on this block) or be unexported
util/showblock/showblock.go:163:1: exported function DumpBlock should
have comment or be unexported
util/showblock/showblock.go:211:5: exported var ErrBadShaPrefix should
have comment or be unexported
util/showblock/showblock.go:212:5: exported var ErrBadShaLen should have
comment or be unexported
util/showblock/showblock.go:213:5: exported var ErrBadShaChar should
have comment or be unexported
This commit implements a built-in concurrent CPU miner that can be enabled
with the combination of the --generate and --miningaddr options. The
--blockminsize, --blockmaxsize, and --blockprioritysize configuration
options wich already existed prior to this commit control the block
template generation and hence affect blocks mined via the new CPU miner.
The following is a quick overview of the changes and design:
- Starting btcd with --generate and no addresses specified via
--miningaddr will give an error and exit immediately
- Makes use of multiple worker goroutines which independently create block
templates, solve them, and submit the solved blocks
- The default number of worker threads are based on the number of
processor cores in the system and can be dynamically changed at
run-time
- There is a separate speed monitor goroutine used to collate periodic
updates from the workers to calculate overall hashing speed
- The current mining state, number of workers, and hashes per second can
be queried
- Updated sample-btcd.conf file has been updated to include the coin
generation (mining) settings
- Updated doc.go for the new command line options
In addition the old --getworkkey option is now deprecated in favor of the
new --miningaddr option. This was changed for a few reasons:
- There is no reason to have a separate list of keys for getwork and CPU
mining
- getwork is deprecated and will be going away in the future so that means
the --getworkkey flag will also be going away
- Having the work 'key' in the option can be confused with wanting a
private key while --miningaddr make it a little more clear it is an
address that is required
Closes#137.
Reviewed by @jrick.
This commit resolves an issue where it was possible the block manager
could hang on shutdown due to inventory rebroadcasting. In particular, it
adds checks to prevent modification of the of rebroadcast inventory during
shutdown and adds a drain on the channel to ensure any outstanding
messages are discarded.
Found by @dajohi who also provided some of the code.
