This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
Rather than making the caller to pass in the median time source on
ProcessBlock and IsCurrent, modify the Config struct to include the
median time source and associate it with the chain instance when it is
created.
This is being done because both the ProcessBlock and IsCurrent functions
require access to the blockchain state already, it is a little bit safer
to ensure the time source matches the chain instance state, it
simplifies the caller logic, and it also allows its use within the logic
of the blockchain package itself which will be required by upcoming
rule change warning logic that is part of BIP9.
This removes the root field and all references to it from the BlockChain
since it is no longer required.
It was previously required because the chain state was not initialized
when the instance was created. However, that is no longer the case, so
there is no reason to keep it around any longer.
The current code is needlessly checking the number of bytes needed to
serialize the unspentness bitmap in the utxo against a maximum value
that could never be returned because the function takes a uint32 output
index which is treated as a bit offset, and converts it bytes, which
will necessarily be less than a max uint32.
This check also causes a compile error on arm where native integers are
32 bits.
This simply removes the unneeded check.
This introduces a new indexing infrastructure for supporting optional
indexes using the new database and blockchain infrastructure along with
two concrete indexer implementations which provide both a
transaction-by-hash and a transaction-by-address index.
The new infrastructure is mostly separated into a package named indexers
which is housed under the blockchain package. In order to support this,
a new interface named IndexManager has been introduced in the blockchain
package which provides methods to be notified when the chain has been
initialized and when blocks are connected and disconnected from the main
chain. A concrete implementation of an index manager is provided by the
new indexers package.
The new indexers package also provides a new interface named Indexer
which allows the index manager to manage concrete index implementations
which conform to the interface.
The following is high level overview of the main index infrastructure
changes:
- Define a new IndexManager interface in the blockchain package and
modify the package to make use of the interface when specified
- Create a new indexers package
- Provides an Index interface which allows concrete indexes to plugin
to an index manager
- Provides a concrete IndexManager implementation
- Handles the lifecycle of all indexes it manages
- Tracks the index tips
- Handles catching up disabled indexes that have been reenabled
- Handles reorgs while the index was disabled
- Invokes the appropriate methods for all managed indexes to allow
them to index and deindex the blocks and transactions
- Implement a transaction-by-hash index
- Makes use of internal block IDs to save a significant amount of
space and indexing costs over the old transaction index format
- Implement a transaction-by-address index
- Makes use of a leveling scheme in order to provide a good tradeoff
between space required and indexing costs
- Supports enabling and disabling indexes at will
- Support the ability to drop indexes if they are no longer desired
The following is an overview of the btcd changes:
- Add a new index logging subsystem
- Add new options --txindex and --addrindex in order to enable the
optional indexes
- NOTE: The transaction index will automatically be enabled when the
address index is enabled because it depends on it
- Add new options --droptxindex and --dropaddrindex to allow the indexes
to be removed
- NOTE: The address index will also be removed when the transaction
index is dropped because it depends on it
- Update getrawtransactions RPC to make use of the transaction index
- Reimplement the searchrawtransaction RPC that makes use of the address
index
- Update sample-btcd.conf to include sample usage for the new optional
index flags
This commit is the first stage of several that are planned to convert
the blockchain package into a concurrent safe package that will
ultimately allow support for multi-peer download and concurrent chain
processing. The goal is to update btcd proper after each step so it can
take advantage of the enhancements as they are developed.
In addition to the aforementioned benefit, this staged approach has been
chosen since it is absolutely critical to maintain consensus.
Separating the changes into several stages makes it easier for reviewers
to logically follow what is happening and therefore helps prevent
consensus bugs. Naturally there are significant automated tests to help
prevent consensus issues as well.
The main focus of this stage is to convert the blockchain package to use
the new database interface and implement the chain-related functionality
which it no longer handles. It also aims to improve efficiency in
various areas by making use of the new database and chain capabilities.
The following is an overview of the chain changes:
- Update to use the new database interface
- Add chain-related functionality that the old database used to handle
- Main chain structure and state
- Transaction spend tracking
- Implement a new pruned unspent transaction output (utxo) set
- Provides efficient direct access to the unspent transaction outputs
- Uses a domain specific compression algorithm that understands the
standard transaction scripts in order to significantly compress them
- Removes reliance on the transaction index and paves the way toward
eventually enabling block pruning
- Modify the New function to accept a Config struct instead of
inidividual parameters
- Replace the old TxStore type with a new UtxoViewpoint type that makes
use of the new pruned utxo set
- Convert code to treat the new UtxoViewpoint as a rolling view that is
used between connects and disconnects to improve efficiency
- Make best chain state always set when the chain instance is created
- Remove now unnecessary logic for dealing with unset best state
- Make all exported functions concurrent safe
- Currently using a single chain state lock as it provides a straight
forward and easy to review path forward however this can be improved
with more fine grained locking
- Optimize various cases where full blocks were being loaded when only
the header is needed to help reduce the I/O load
- Add the ability for callers to get a snapshot of the current best
chain stats in a concurrent safe fashion
- Does not block callers while new blocks are being processed
- Make error messages that reference transaction outputs consistently
use <transaction hash>:<output index>
- Introduce a new AssertError type an convert internal consistency
checks to use it
- Update tests and examples to reflect the changes
- Add a full suite of tests to ensure correct functionality of the new
code
The following is an overview of the btcd changes:
- Update to use the new database and chain interfaces
- Temporarily remove all code related to the transaction index
- Temporarily remove all code related to the address index
- Convert all code that uses transaction stores to use the new utxo
view
- Rework several calls that required the block manager for safe
concurrency to use the chain package directly now that it is
concurrent safe
- Change all calls to obtain the best hash to use the new best state
snapshot capability from the chain package
- Remove workaround for limits on fetching height ranges since the new
database interface no longer imposes them
- Correct the gettxout RPC handler to return the best chain hash as
opposed the hash the txout was found in
- Optimize various RPC handlers:
- Change several of the RPC handlers to use the new chain snapshot
capability to avoid needlessly loading data
- Update several handlers to use new functionality to avoid accessing
the block manager so they are able to return the data without
blocking when the server is busy processing blocks
- Update non-verbose getblock to avoid deserialization and
serialization overhead
- Update getblockheader to request the block height directly from
chain and only load the header
- Update getdifficulty to use the new cached data from chain
- Update getmininginfo to use the new cached data from chain
- Update non-verbose getrawtransaction to avoid deserialization and
serialization overhead
- Update gettxout to use the new utxo store versus loading
full transactions using the transaction index
The following is an overview of the utility changes:
- Update addblock to use the new database and chain interfaces
- Update findcheckpoint to use the new database and chain interfaces
- Remove the dropafter utility which is no longer supported
NOTE: The transaction index and address index will be reimplemented in
another commit.
First, it removes the documentation section from all the README.md files
and instead puts a web-based godoc badge and link at the top with the
other badges. This is being done since the local godoc tool no longer
ships with Go by default, so the instructions no longer work without
first installing godoc. Due to this, pretty much everyone uses the
web-based godoc these days anyways. Anyone who has manually installed
godoc won't need instructions.
Second, it makes sure the ISC license badge is at the top with the other
badges and removes the textual reference in the overview section.
Finally, it's modifies the Installation section to Installation and
Updating and adds a '-u' to the 'go get' command since it works for both
and thus is simpler.
Introduce an ECDSA signature verification into btcd in order to
mitigate a certain DoS attack and as a performance optimization.
The benefits of SigCache are two fold. Firstly, usage of SigCache
mitigates a DoS attack wherein an attacker causes a victim's client to
hang due to worst-case behavior triggered while processing attacker
crafted invalid transactions. A detailed description of the mitigated
DoS attack can be found here: https://bitslog.wordpress.com/2013/01/23/fixed-bitcoin-vulnerability-explanation-why-the-signature-cache-is-a-dos-protection/
Secondly, usage of the SigCache introduces a signature verification
optimization which speeds up the validation of transactions within a
block, if they've already been seen and verified within the mempool.
The server itself manages the sigCache instance. The blockManager and
txMempool respectively now receive pointers to the created sigCache
instance. All read (sig triplet existence) operations on the sigCache
will not block unless a separate goroutine is adding an entry (writing)
to the sigCache. GetBlockTemplate generation now also utilizes the
sigCache in order to avoid unnecessarily double checking signatures
when generating a template after previously accepting a txn to the
mempool. Consequently, the CPU miner now also employs the same
optimization.
The maximum number of entries for the sigCache has been introduced as a
config parameter in order to allow users to configure the amount of
memory consumed by this new additional caching.
This commit converts all block height references to int32 instead of
int64. The current target block production rate is 10 mins per block
which means it will take roughly 40,800 years to reach the maximum
height an int32 affords. Even if the target rate were lowered to one
block per minute, it would still take roughly another 4,080 years to
reach the maximum.
In the mean time, there is no reason to use a larger type which results
in higher memory and disk space usage. However, for now, in order to
avoid having to reserialize a bunch of database information, the heights
are still serialized to the database as 8-byte uint64s.
This is being mainly being done in preparation for further upcoming
infrastructure changes which will use the smaller and more efficient
4-byte serialization in the database as well.
This change moves IsFinalizedTransaction to txscript and also changes
the first argument to take a wire.MsgTx instead of btcutil.Tx. This
is needed for an upcoming diff in which txscript will require
IsFinalizedTransaction and we do not want to import the btcd/blockchain.
This commit refactors the consensus rule checks for block headers and
blocks in the blockchain package into separate functions. These changes
contain no modifications to consensus rules and the code still passes all
block consensus tests. It is only a refactoring.
This is being done to help pave the way toward supporting concurrent
downloads. While the package already supports headers-first mode up
through the latest checkpoint through the use of the BFFastAdd flag and
hard-coded checkpoints, it currently only works when downloading from a
single peer. In order to support concurrent downloads from multiple
peers, the ability for the caller to do things such as independently
checking a block header (both context-free and full-context checks) will
be needed.
There are several more changes that will be necessary to support
concurrent downloads as well, such as making the package concurrent safe,
modifying it to make use of the new database API, etc. Those changes are
planned for future commits.
This commit renames the Script type to Engine to better reflect its
purpose. It also renames the NewScript function to NewEngine to match.
This is being done because name Script for the engine is confusing since
it implies it is an actual script rather than the execution environment
for the script. It also paves the way for eventually supplying a
ParsedScript type which will be less likely to be confused with the
execution environment.
While moving the code, some additional variable names and comments have
been updated to better match the style used throughout the rest of the
code base. In addition, an attempt has been made to use consistent naming
of the engine as 'vm' instead of using different variables names as it was
previously.
Finally, the relevant engine code has been moved into a new file named
engine.go and related tests moved to engine_test.go.
This commit removes the unnecessary sigScript parameter from the
txscript.NewScript function. This has bothered me for a while because it
can and really should be obtained from the provided transaction and input
index. The way it was, the passed script could technically be different
than what is in the transaction. Obviously that would be an improper use
of the API, but it's safer and more convenient to simply pull it from the
provided transaction and index.
Also, since the function signature is changing anyways, make the input
index parameter come after the transaction which it references.
This commit removes the error returns from the BlockHeader.BlockSha,
MsgBlock.BlockSha, and MsgTx.TxSha functions since they can never fail and
end up causing a lot of unneeded error checking throughout the code base.
It also updates all call sites for the change.
This commit adds a new function which is similar to the DoubleSha256
function except it returns a ShaHash copy instead of a byte slice. It
also adds a new benchmark for it.
This can be a slight optimization in certain cases where the caller
ultimately wants a ShaHash since it can avoid a heap allocation and
additional copy to convert the result to a ShaHash (the function simply
performs a type cast against the returned array which is not possible
against a []byte).
existing: DoubleSha256 500000 3081 ns/op 32 B/op 1 allocs/op
new: DoubleSha256SH 500000 2939 ns/op 0 B/op 0 allocs/op
The hashing functions for blocks and transactions have also been updated
to make use of the new function since they directly return the ShaHash.
The transaction change in particular is quite useful since transactions
are frequently hashed and this change allows all of those hashes to avoid
an additional heap allocation.
This commit contains three classes of optimizations:
- Reducing the number of unnecessary hash copies
- Improve the performance of the DoubleSha256 function
- A couple of minor optimizations of the ShaHash functions
The first class is a result of the Bytes function on a ShaHash making a
copy of the bytes before returning them. It really should have been named
CloneBytes, but that would break the API now.
To address this, a comment has been added to the function which explicitly
calls out the copy behavior. In addition, all call sites of .Bytes on a
ShaHash in the code base have been updated to simply slice the array when
a copy is not needed. This saves a significant amount of data copying.
The second optimization modifies the DoubleSha256 function to directly use
fastsha256.Sum256 instead of the hasher interface. This reduces the
number of allocations needed. A benchmark for the function has been added
as well.
old: BenchmarkDoubleSha256 500000 3691 ns/op 192 B/op 3 allocs/op
new: BenchmarkDoubleSha256 500000 3081 ns/op 32 B/op 1 allocs/op
The final optimizations are for the ShaHash IsEqual and SetBytes functions
which have been modified to make use of the fact the type is an array and
remove an unneeded subslice.
In order to avoid prior situations of stalled syncs due to
outdated peer height data, we now update block heights up peers in
real-time as we learn of their announced
blocks.
Updates happen when:
* A peer sends us an orphan block. We update based on
the height embedded in the scriptSig for the coinbase tx
* When a peer sends us an inv for a block we already know
of
* When peers announce new blocks. Subsequent
announcements that lost the announcement race are
recognized and peer heights are updated accordingly
Additionally, the `getpeerinfo` command has been modified
to include both the starting height, and current height of
connected peers.
Docs have been updated with `getpeerinfo` extension.
This commit adds a new function to the blockchain package named
IsCoinBaseTx which performs the same function as IsCoinBase except it
takes raw wire transactions as opposed to the higher level util
transactions.
While here, it also adds a file for benchmarks along with a couple of
benchmarks for the IsCoinBase and IsCoinBaseTx functions.
Finally, the function was very slightly optimized:
BenchmarkIsCoinBaseOld 100000000 10.7 ns/op 0 B/op 0 allocs/op
BenchmarkIsCoinBaseNew 200000000 6.05 ns/op 0 B/op 0 allocs/op
This commit moves the definition of the flags which are needed to check
transaction scripts higher up the call stack to pave the way for adding
support for v3 blocks. While here, also spruce up a couple of sections.
There are no functional changes in this commit.
This commit contains the entire btcchain repository along with several
changes needed to move all of the files into the blockchain directory in
order to prepare it for merging. This does NOT update btcd or any of the
other packages to use the new location as that will be done separately.
- All import paths in the old btcchain test files have been changed to
the new location
- All references to btcchain as the package name have been changed to
blockchain
