The implementation has been adapted from the dcrec module in dcrd. The
bug was initially fixed in decred/dcrd@3d9cda1 while transitioning to a
constant time algorithm. A large set of test vectors were subsequently
added in decred/dcrd@8c6b52d.
The function signature has been preserved for backwards compatibility.
This means that returning whether the value has overflowed, and the
corresponding test vectors have not been backported.
This fixes#1170 and closes a previous attempt to fix the bug in #1178.
This commit fixes an issue introduced in the recent #1429, where
the output of SqrtVal is not normalized before using IsOdd() to compare
with the expected parity of the y-coordinate. The IsOdd() is only
guaranteed to work if the value has been denormalized, so a denormalized
sqrt >= p would report the opposite parity. We fix this by normalizing
both after compute sqrt(x^3) and when negating the root as directed by
the ybit.
The previous naming suggested that the value ((P+1)/4+1)/4 was being
returned, when in fact the returned value is simply (P+1)/4. The old
method is superseded by Q().
This commit optimizes the decompressPoint subroutine, used in extracting
compressed pubkeys and performing pubkey recovery. We do so by replacing
the use of big.Int.Exp with with square-and-multiply exponentiation of
btcec's more optimized fieldVals, reducing the overall latency and
memory requirements of decompressPoint.
Instead of operating on bits of Q = (P+1)/4, the exponentiation applies
the square-and-multiply operations on full bytes of Q. Compared to the
original speedup. Compared the bit-wise version, the improvement is
roughly 10%.
A new pair fieldVal methods called Sqrt and SqrtVal are added, which
applies the square-and-multiply exponentiation using precomputed
byte-slice of the value Q.
Comparison against big.Int sqrt and SAM sqrt over bytes of Q:
benchmark old ns/op new ns/op delta
BenchmarkParseCompressedPubKey-8 35545 23119 -34.96%
benchmark old allocs new allocs delta
BenchmarkParseCompressedPubKey-8 35 6 -82.86%
benchmark old bytes new bytes delta
BenchmarkParseCompressedPubKey-8 2777 256 -90.78%
As of https://github.com/btcsuite/btcd/pull/1193, decompressPoint now
validates that the point is on the curve. The x and y cooordinates are
also implicitly <= P, since the modular reduction is applied to both
before the method returns. The checks are moved so that they are still
applied when parsing an uncompressed pubkey, as the checks are not
redundant in that path.
This regenerates the precomputed secp256k1 byte points used to optimize
scalar multiplication. This should have been done as part of the
normalization correction.
This commit adds a new function to btcec: IsCompressedPubKey. This
function returns true iff the passed serialized public key is encoded
in compressed format.
This slightly optimizes the NAF function by avoiding returning the
unused bit when there is not a carry.
It also adds a bunch of additional unit tests which I made while
debugging.
This modifies the normalize function of the internal field value to
both optimize it and address an issue where the reduction could
lead to an incorrect result with a small range of values. It also adds
tests to ensure the behavior is correct.
The following benchmark shows the relative speedups as a result of the
optimization on my system. In particular, the changes result in
approximately a 14% speedup in Normalize, which ultimately translates to
a 2% speedup in signature verifies.
benchmark old ns/op new ns/op delta
--------------------------------------------------------------------
BenchmarkAddJacobian 1364 1289 -5.50%
BenchmarkAddJacobianNotZOne 3150 3091 -1.87%
BenchmarkScalarBaseMult 134117 132816 -0.97%
BenchmarkScalarBaseMultLarge 135067 132966 -1.56%
BenchmarkScalarMult 411218 402217 -2.19%
BenchmarkSigVerify 671585 657833 -2.05%
BenchmarkFieldNormalize 36.0 31.0 -13.89%
The github markdown interpreter has been changed such that it no longer
allows spaces in between the brackets and parenthesis of links and now
requires a newline in between anchors and other formatting. This
updates all of the markdown files accordingly.
While here, it also corrects a couple of inconsistencies in some of the
README.md files.
This simplifies the code based on the recommendations of the gosimple
lint tool.
Also, it increases the deadline for the linters to run to 10 minutes and
reduces the number of threads that is uses. This is being done because
the Travis environment has become increasingly slower and it also seems
to be hampered by too many threads running concurrently.
Putting the test code in the same package makes it easier for forks
since they don't have to change the import paths as much and it also
gets rid of the need for internal_test.go to bridge.
Also, remove the exception from the lint checks about returning the
unexported type since it is no longer required.
This adds new tests to the TestNormalize, TestMul, TestAdd2 functions
which trigger an issue with modular reduction that was fixed in the
prevous commit to prevent regressions.
As noted in issue #706, the existing code had an issue where the
normalized result was > P when both the first and second words of the
field representation being normalized were BOTH greater than or equal to
the first and second words of P. Although this condition is rare in
practice, it needs to be handled properly.
This resolves the issue by comparing the low words in the final
reduction step against the normalized low order prime bits to ensure the
final subtraction occurs correctly any time they're > P. This approach
retains the constant time property as well.
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
Profiles discovered that lookups into the signature cache included an
expensive comparison to the stored `sigInfo` struct. This lookup had the
potential to be more expensive than directly verifying the signature
itself!
In addition, evictions were rather expensive because they involved
reading from /dev/urandom, or equivalent, for each eviction once the
signature cache was full as well as potentially iterating over every
item in the cache in the worst-case.
To remedy this poor performance several changes have been made:
* Change the lookup key to the fixed sized 32-byte signature hash
* Perform a full equality check only if there is a cache hit which
results in a significant speed up for both insertions and existence
checks
* Override entries in the case of a colliding hash on insert Add an
* .IsEqual() method to the Signature and PublicKey types in the
btcec package to facilitate easy equivalence testing
* Allocate the signature cache map with the max number of entries in
order to avoid unnecessary map re-sizes/allocations
* Optimize evictions from the signature cache Delete the first entry
* seen which is safe from manipulation due to
the pre image resistance of the hash function
* Double the default maximum number of entries within the signature
cache due to the reduction in the size of a cache entry
* With this eviction scheme, removals are effectively O(1)
Fixes#575.
First, it removes the documentation section from all the README.md files
and instead puts a web-based godoc badge and link at the top with the
other badges. This is being done since the local godoc tool no longer
ships with Go by default, so the instructions no longer work without
first installing godoc. Due to this, pretty much everyone uses the
web-based godoc these days anyways. Anyone who has manually installed
godoc won't need instructions.
Second, it makes sure the ISC license badge is at the top with the other
badges and removes the textual reference in the overview section.
Finally, it's modifies the Installation section to Installation and
Updating and adds a '-u' to the 'go get' command since it works for both
and thus is simpler.
