Putting the test code in the same package makes it easier for forks
since they don't have to change the import paths as much and it also
gets rid of the need for internal_test.go to bridge.
While here, remove the reorganization test since it is much better
handled by the full block tests and is no longer needed and do some
light cleanup on a few other tests.
The full block tests had to remain in the separate test package since it
is a circular dependency otherwise. This did require duplicating some
of the chain setup code, but given the other benefits this is
acceptable.
This introduces the concept of a synthetic block chain that can be used
in the tests to avoid needing setup a full blown chain instance with a
database and generate valid blocks and converts the sequence lock tests
in TestCalcSequenceLock to use it.
Not only does this speed up the test execution time, but it allows the
dependency on rpctest to be removed which will allow the sequence locks
tests to be consolidated into the main package without creating a
circular dependency.
This modifies the function to set the tip in the new chainview code to
bulk copy existing nodes when it needs to expand the cap rather than
simply creating a new empty slice and allowing the walk code below it to
repopulate it. This is a nice optimization since, in practice, most of
the time expanding the cap is only required when the active chain is
being extended after having run for a while which means the end result
is that it will be able to bulk copy all the nodes and just add the most
recent one versus having to walk them all and add them back.
Also, while here expand the tests for setting the tip to ensure the
nodes contained in the resulting view are correct after forcing the
resizes and correct a bug they exposed where changing between a
longer-shorter-longer chain where the longer chain is the same chain
could result in not populating the view correctly.
Finally, update the fake nodes generated by the tests to use a
nonce generated by a deterministic prng in order to ensure the hashes of
all fake nodes are unique, but reproducible.
This regenerates the precomputed secp256k1 byte points used to optimize
scalar multiplication. This should have been done as part of the
normalization correction.
This implements a new type in the blockchain package that takes
advantage of the fact that all block nodes are now in memory to provide
a flat view of a specific chain of blocks (a specific branch of the
overall block tree) from a given tip all the way back to the genesis
block along with several convenience functions such as efficiently
comparing two views, quickly finding the fork point (if any) between two
views, and O(1) lookup of the node at a specific height.
The view is not currently used, but the intent is that the code will be
refactored to make use of these views to simplify and optimize several
areas such as best chain selection and reorg logic and finding successor
nodes. They will also greatly simplify the process of disconnecting the
download logic from the connection logic.
A comprehensive suite of tests is provided to ensure the chain views
behave correctly.
This cleans up the test in TestCalcSequenceLock in the following ways:
- Use calculated values instead of magic value so it is easier to update
the tests as needed
- Make tests match the comments
- Change comments to be more consistent and fix some grammar errors
- Set mempool flag for unconfirmed tx tests since they are intended to
mimic transactions in the mempool
This commit contains the entire btcrpcclient repository along with
several changes needed to move all of the files into the rpcclient
directory in order to prepare it for merging. This does NOT update btcd
or any of the other packages to use the new location as that will be
done separately.
- All import paths in the old btcrpcclient files have been changed to
the new location
- All references to btcrpcclient as the package name have been changed to
rpcclient
This modifies the code that determines the most recently known
checkpoint to take advantage of recent changes which make the entire
block index available in memory by only storing a reference to the
specific node in the index that represents the latest known checkpoint.
Previously, the entire block was stored and new checkpoints required
loading it from the database.
This completely removes the threshold state database caching code since
it can very quickly be calculated at startup now that the entire block
index is loaded first.
This reworks the block index code such that it loads all of the headers
in the main chain at startup and constructs the full block index
accordingly.
Since the full index from the current best tip all the way back to the
genesis block is now guaranteed to be in memory, this also removes all
code related to dynamically loading the nodes and updates some of the
logic to take advantage of the fact traversing the block index can
longer potentially fail. There are also more optimizations and
simplifications that can be made in the future as a result of this.
Due to removing all of the extra overhead of tracking the dynamic state,
and ensuring the block node structs are aligned to eliminate extra
padding, the end result of a fully populated block index now takes quite
a bit less memory than the previous dynamically loaded version.
The main downside is that it now takes a while to start whereas it was
nearly instant before, however, it is much better to provide more
efficient runtime operation since that is its ultimate purpose and the
benefits far outweigh this downside.
Some benefits are:
- Since every block node is in memory, the recent code which
reconstructs headers from block nodes means that all headers can
always be served from memory which is important since the majority of
the network has moved to header-based semantics
- Several of the error paths can be removed since they are no longer
necessary
- It is no longer expensive to calculate CSV sequence locks or median
times of blocks way in the past
- It will be possible to create much more efficient iteration and
simplified views of the overall index
- The entire threshold state database cache can be removed since it is
cheap to construct it from the full block index as needed
An overview of the logic changes are as follows:
- Move AncestorNode from blockIndex to blockNode and greatly simplify
since it no longer has to deal with the possibility of dynamically
loading nodes and related failures
- Rename RelativeNode to RelativeAncestor, move to blockNode, and
redefine in terms of AncestorNode
- Move CalcPastMedianTime from blockIndex to blockNode and remove no
longer necessary test for nil
- Change calcSequenceLock to use Ancestor instead of RelativeAncestor
since it reads more clearly
Instead of having both server and blockManager be aware of the
txProcessed and blockProcessed channels, now the server passed them as
method arguments to blockProcessor.
This takes care of a few minor nits on the recently merged subscribe
code. In particular:
- Avoid extra unnecessary allocation on notifications slice
- Avoid defer overhead on notification mutex in sendNotifications
- Make test function comment start with the name of the function per
Effective Go guidelines
- Use constant for number of subscribers in test
- Don't exceed column 80 in test print
This refactors the RPC server to accept and take ownership of already
configured listeners and refactors the logic to setup those listeners to
the server. This mirrors the logic used by the connection manager and
is desirable since it is another step closer to being able to split the
RPC server code out into a separate package and will make it much easier
to internally test since it allows creating mock listeners.
This modifies all of the RPC code to use the chain parameters that are
associated with the RPC server instead of the global activeNetParams and
thus moves one step closer to being able to split the RPC server out
into a separate package.
This decouples the RPC server from the internal btcd server to move
closer to being able to split it out into a separate package.
In order to accomplish this, it introduces an rpcserverConfig type and
several new interfaces, named rpcserverPeer, rpcserverConnManager, and
rpcserverBlockManager, which are necessary to break the direct
dependencies on the main server and block manager instances.
It also adds concrete implementations of the new interfaces and uses
them to configure the RPC server.
Ultimately, the RPC server should ideally be decoupled even more such
that all of the types in the configuration struct use interfaces instead
of the concrete types. Doing this would make the RPC server much easier
to internally test since it would allow creating lightweight stubs for
the various pieces.
Instead of having the block manager notify the RPC server about
accepted, connected, and disconnected blocks, the RPC server will
directly listen for notifications from the blockchain.
The objective is to remove the reference from blockManager to
server. Since the blockManager is responsible for keeping the mempool
in sync, it should have a direct reference to it.
The BlockChain struct emits notifications for various events, but
it is only possible to register one listener. This changes the
interface and implementations to allow multiple listeners.
This removes the standardness check to reject transactions with a lock
time greater than a maxint32 because the old bitcoind nodes which it was
designed to protect against are no longer valid for other reasons and
thus there are no longer any of them on the network to worry about.
This makes the code for getheaders more consistent with the rest of the
code in terms of making use of existing error functions and using the
same RPC error codes as other handlers.
While here, it also performs the fetching of headers directly instead of
using a function from server which makes it more tightly coupled.
This replaces the ErrDoubleSpend and ErrMissingTx error codes with a
single error code named ErrMissingTxOut and updates the relevant errors
and expected test results accordingly.
Once upon a time, the code relied on a transaction index, so it was able
to definitively differentiate between a transaction output that
legitimately did not exist and one that had already been spent.
However, since the code now uses a pruned utxoset, it is no longer
possible to reliably differentiate since once all outputs of a
transaction are spent, it is removed from the utxoset completely.
Consequently, a missing transaction could be either because the
transaction never existed or because it is fully spent.
If no existing btcctl.conf file exists, btcctl creates a default one
using the RPC username and password from the btcd.conf. If the
--wallet flag is passed, however, it should read from btcwallet.conf
instead.
https://github.com/btcsuite/btcd/issues/875.
This commit updates the block template generation logic to only include
witness transactions once the soft-fork has activated and to also
include the OP_RETURN witness commitment (with additional block weight
accounting).
This commit updates the new segwit validation logic within block
validation to be guarded by an initial check to the version bits state
before conditionally enforcing the logic based off of the state.
This commit adds set of BIP0009 (Version Bits) deployment parameters
for all networks detailing the activation parameters for the segwit
soft-fork.
Additionally, the BIP0009 integration test has been updated to test for
the proper transitioning of version bits state for the segwit soft
fork. Finally, the `getblockchaininfo` test has also been updated to
properly display the state of segwit.
This commit modifies the existing block selection logic to limit
preferentially by weight instead of serialized block size, and also to
adhere to the new sig-op cost limits which are weighted according to
the witness discount.
This commit implements the new block validation rules as defined by
BIP0141. The new rules include the constraints that if a block has
transactions with witness data, then there MUST be a commitment within
the conies transaction to the root of a new merkle tree which commits
to the wtxid of all transactions. Additionally, rather than limiting
the size of a block by size in bytes, blocks are now limited by their
total weight unit. Similarly, a newly define “sig op cost” is now used
to limit the signature validation cost of transactions found within
blocks.
This commit implements the new “weight” metric introduced as part of
the segwit soft-fork. Post-fork activation, rather than limiting the
size of blocks and transactions based purely on serialized size, a new
metric “weight” will instead be used as a way to more accurately
reflect the costs of a tx/block on the system. With blocks constrained
by weight, the maximum block-size increases to ~4MB.
This commit adds verification of the post-segwit standardness
requirement that all pubkeys involved in checks operations MUST be
serialized as compressed public keys. A new ScriptFlag has been added
to guard this behavior when executing scripts.
