147 lines
4.8 KiB
Markdown
147 lines
4.8 KiB
Markdown
# Configuring TOR
|
|
|
|
lbcd provides full support for anonymous networking via the
|
|
[Tor Project](https://www.torproject.org/), including [client-only](#Client)
|
|
and [hidden service](#HiddenService) configurations along with
|
|
[stream isolation](#TorStreamIsolation). In addition, lbcd supports a hybrid,
|
|
[bridge mode](#Bridge) which is not anonymous, but allows it to operate as a
|
|
bridge between regular nodes and hidden service nodes without routing the
|
|
regular connections through Tor.
|
|
|
|
While it is easier to only run as a client, it is more beneficial to the Bitcoin
|
|
network to run as both a client and a server so others may connect to you to as
|
|
you are connecting to them. We recommend you take the time to setup a Tor
|
|
hidden service for this reason.
|
|
|
|
## Client-only
|
|
|
|
Configuring lbcd as a Tor client is straightforward. The first step is
|
|
obviously to install Tor and ensure it is working. Once that is done, all that
|
|
typically needs to be done is to specify the `--proxy` flag via the lbcd command
|
|
line or in the lbcd configuration file. Typically the Tor proxy address will be
|
|
127.0.0.1:9050 (if using standalone Tor) or 127.0.0.1:9150 (if using the Tor
|
|
Browser Bundle). If you have Tor configured to require a username and password,
|
|
you may specify them with the `--proxyuser` and `--proxypass` flags.
|
|
|
|
By default, lbcd assumes the proxy specified with `--proxy` is a Tor proxy and
|
|
hence will send all traffic, including DNS resolution requests, via the
|
|
specified proxy.
|
|
|
|
NOTE: Specifying the `--proxy` flag disables listening by default since you will
|
|
not be reachable for inbound connections unless you also configure a Tor
|
|
[hidden service](#HiddenService).
|
|
|
|
### Command line example
|
|
|
|
```bash
|
|
./lbcd --proxy=127.0.0.1:9050
|
|
```
|
|
|
|
### Config file example
|
|
|
|
```text
|
|
[Application Options]
|
|
|
|
proxy=127.0.0.1:9050
|
|
```
|
|
|
|
## Client-server via Tor hidden service
|
|
|
|
The first step is to configure Tor to provide a hidden service. Documentation
|
|
for this can be found on the Tor project website
|
|
[here](https://www.torproject.org/docs/tor-hidden-service.html.en). However,
|
|
there is no need to install a web server locally as the linked instructions
|
|
discuss since lbcd will act as the server.
|
|
|
|
In short, the instructions linked above entail modifying your `torrc` file to
|
|
add something similar to the following, restarting Tor, and opening the
|
|
`hostname` file in the `HiddenServiceDir` to obtain your hidden service .onion
|
|
address.
|
|
|
|
```text
|
|
HiddenServiceDir /var/tor/lbcd
|
|
HiddenServicePort 8333 127.0.0.1:8333
|
|
```
|
|
|
|
Once Tor is configured to provide the hidden service and you have obtained your
|
|
generated .onion address, configuring lbcd as a Tor hidden service requires
|
|
three flags:
|
|
|
|
* `--proxy` to identify the Tor (SOCKS 5) proxy to use for outgoing traffic.
|
|
This is typically 127.0.0.1:9050.
|
|
* `--listen` to enable listening for inbound connections since `--proxy`
|
|
disables listening by default
|
|
* `--externalip` to set the .onion address that is advertised to other peers
|
|
|
|
### Command line example
|
|
|
|
```bash
|
|
./lbcd --proxy=127.0.0.1:9050 --listen=127.0.0.1 --externalip=fooanon.onion
|
|
```
|
|
|
|
### Config file example
|
|
|
|
```text
|
|
[Application Options]
|
|
|
|
proxy=127.0.0.1:9050
|
|
listen=127.0.0.1
|
|
externalip=fooanon.onion
|
|
```
|
|
|
|
## Bridge mode (not anonymous)
|
|
|
|
lbcd provides support for operating as a bridge between regular nodes and hidden
|
|
service nodes. In particular this means only traffic which is directed to or
|
|
from a .onion address is sent through Tor while other traffic is sent normally.
|
|
_As a result, this mode is **NOT** anonymous._
|
|
|
|
This mode works by specifying an onion-specific proxy, which is pointed at Tor,
|
|
by using the `--onion` flag via the lbcd command line or in the lbcd
|
|
configuration file. If you have Tor configured to require a username and
|
|
password, you may specify them with the `--onionuser` and `--onionpass` flags.
|
|
|
|
NOTE: This mode will also work in conjunction with a hidden service which means
|
|
you could accept inbound connections both via the normal network and to your
|
|
hidden service through the Tor network. To enable your hidden service in bridge
|
|
mode, you only need to specify your hidden service's .onion address via the
|
|
`--externalip` flag since traffic to and from .onion addresses are already
|
|
routed via Tor due to the `--onion` flag.
|
|
|
|
### Command line example
|
|
|
|
```bash
|
|
./lbcd --onion=127.0.0.1:9050 --externalip=fooanon.onion
|
|
```
|
|
|
|
### Config file example
|
|
|
|
```text
|
|
[Application Options]
|
|
|
|
onion=127.0.0.1:9050
|
|
externalip=fooanon.onion
|
|
```
|
|
|
|
## Tor stream isolation
|
|
|
|
Tor stream isolation forces Tor to build a new circuit for each connection
|
|
making it harder to correlate connections.
|
|
|
|
lbcd provides support for Tor stream isolation by using the `--torisolation`
|
|
flag. This option requires --proxy or --onionproxy to be set.
|
|
|
|
### Command line example
|
|
|
|
```bash
|
|
./lbcd --proxy=127.0.0.1:9050 --torisolation
|
|
```
|
|
|
|
### Config file example
|
|
|
|
```text
|
|
[Application Options]
|
|
|
|
proxy=127.0.0.1:9050
|
|
torisolation=1
|
|
```
|