libXext was only needed (as a library) by QT when it was using
XLib/libX11 (as a library), now that we're building QT without
XLib/libX11, we can safely remove libXext.
We're no longer building QT with libX11/XLib, however, libX11/XLib
headers are still required for parts of QT. In this commit we add a
minimal configure.ac for libX11/XLib that is headers-only.
This change allows us to remove all of libX11/XLib's dependencies.
Previously, in 683b7d7a3f and
0e752637a2, we accidentally broke QT's
ability to pick up Xlib thru the config.gui.tests.xlib configuration
test, which also means that config.gui.libraries.xcb_xlib wasn't run.
This resulted in a QT build that was implicitly -no-xcb-lib and
-no-feature-xlib.
This is actually a desired behaviour, as it means less required shared
objects for our final bitcoin-qt binary. Specifically, it eliminated the
libX11-xcb.so.1 and libX11.so.6 requirements.
In this commit, we explicitly build without Xlib. We should continue to
track upstream ticket https://bugreports.qt.io/browse/QTBUG-61452 which
talks about adding a -no-xlib (non-hidden) flag instead of the
-no-feature-xlib (hidden) flag.
e10e1e8db0 Restrict lifetime of ReserveDestination to CWallet::CreateTransaction (Gregory Sanders)
d9ff862f2d CreateTransaction calls KeepDestination on ReserveDestination before success (Gregory Sanders)
Pull request description:
The typical usage pattern of `ReserveDestination` is to explicitly `KeepDestination`, or `ReturnDestination` when it's detected it will not be used.
Implementers such as myself may fail to complete this pattern, and could result in key re-use: https://github.com/bitcoin/bitcoin/pull/15557#discussion_r271956393
Since ReserveDestination is currently only used directly in the `CreateTransaction`/`CommitTransaction` flow(or fee bumping where it's just used in `CreateTransaction`), I instead make the assumption that if a transaction is returned by `CreateTransaction` it's highly likely that it will be accepted by the caller, and the `ReserveDestination` kept. This simplifies the API as well. There are very few cases where this would not be the case which may result in keys being burned.
Those failure cases appear to be:
`CommitTransaction` failing to get the transaction into the mempool
Belt and suspenders check in `WalletModel::prepareTransaction`
Alternative to https://github.com/bitcoin/bitcoin/pull/15796
ACKs for top commit:
achow101:
ACK e10e1e8db0 Reviewed the diff
stevenroose:
utACK e10e1e8db0
meshcollider:
utACK e10e1e8db0
Tree-SHA512: 78d047a00f39ab41cfa297052cc1e9c224d5f47d3d2299face650d71827635de077ac33fb4ab9f7dc6fc5a27f4a68415a1bc9ca33a3cb09a78f4f15b2a48411b
fa89badf88 test: Require standard txs in regtest (MarcoFalke)
fa9b419160 test: Add test that mainnet requires standard txs (MarcoFalke)
fa613ca0a8 chainparams: Remove unused fMineBlocksOnDemand (MarcoFalke)
Pull request description:
I don't see a reason why regtest should allow non-standard txs, as it makes testing mainnet behaviour such as #15846 unnecessarily hard and unintuitive.
Of course, testnet policy remains unchanged to allow propagation of non-standard txs.
ACKs for top commit:
ajtowns:
ACK fa89badf88
Tree-SHA512: c4c675affb054868850bd2683aa07f4c741a448cbacb2ea8334191e105f426b0790fe6a468be61e9c5880d24154f7bf1c7075051697172dce92180c1bc3a1c90
682a1d0f20 refactoring: remove mapBlockIndex global (James O'Beirne)
55d525ab90 refactoring: make pindexBestInvalid internal to validation.cpp (James O'Beirne)
4ed55dfcd7 refactoring: add block_index_candidates arg to LoadBlockIndex (James O'Beirne)
613c46fe9e refactoring: move block metadata structures into BlockManager (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/2019-04-proposal/proposal
---
Under an assumeutxo model, we have multiple CChainState instances in use at once in order to support background validation. Currently, each CChainState instance has its own mapBlockIndex, a collection of linked block headers, in addition to a few other data structures that are related to maintenance of the block tree but not necessarily to any given chainstate.
In order to avoid duplicating this data across chainstates, this change moves chainstate-agnostic block metadata (and related behavior) into a class, `BlockManager`. Chainstates are parameterized with a reference to a blockmanager instance and in practice they share the same instance.
Most of this change is conceptually move-only, though the diff is somewhat muddled. The first commit can be reviewed slightly more easily with `--color-moved=dimmed_zebra`. Admittedly, that commit is pretty unwieldy; I tried to split it up after the fact with `git add --patch`, but that was difficult because of git's inability to split hunks past a certain point. Some of the moves also ended up being obscured when done over separate commits.
ACKs for top commit:
MarcoFalke:
ACK 682a1d0f20
ryanofsky:
utACK 682a1d0f20, only changes since last review were rebase and fixing conflict on a moved line
ariard:
utACK 682a1d0. Most of the changes are move-only, with main problem being to avoid creating circular dependencies between `BlockManager` and `CChainState`. Tested, comments are mostly nits, feel free to ignore them
Tree-SHA512: 738d8d06539ba53acf4bd2d48ae000473e645bbc4e63d798d55d247a4d5a4f781b73538ed590f6407be9ab402ea9d395570ea20bff0a4b9ce747bcc1600c5108
fa0d0ff6e1 Remove unused bits from the service flags enum (MarcoFalke)
Pull request description:
Remove all bits that have no BIP specification nor can be observed on the active network
ACKs for top commit:
practicalswift:
utACK fa0d0ff6e1
LarryRuane:
utACK fa0d0ff6e1
promag:
ACK fa0d0ff6e1.
laanwj:
ACK fa0d0ff6e1
Tree-SHA512: 6342017bfd4c2a39c998fbb02497931b11892e1cb60fc13b948b91812f281b605a25a3fdc0d5358dff18da4e82eb4eb4de95c43c7e76ecb331c1c3985443dd21
c7f6ce74d3 docs: Improve netbase comments (Carl Dong)
Pull request description:
Second in a series of PRs documenting the net stack. Contributed with sincere thanks to sipa, laanwj, and gmaxwell for providing much of the history, context, and rationale.
ACKs for top commit:
laanwj:
ACK c7f6ce74d3
Tree-SHA512: ad83054d3b8d0c8c3fb55be011bcf294176e7509513bf61326866afd53e8159644e0d59bb3a2f404717f525cbf736096d4c1990e61cfd89845d51fa6b5394b7c
8f250ab788 TEST: Replace hard-coded hex tx with classes (Steven Roose)
Pull request description:
Came across these breaking Elements.
ACKs for top commit:
MarcoFalke:
ACK 8f250ab788
instagibbs:
utACK 8f250ab788
Tree-SHA512: e8615dad4cda0beea4b0c7d4951a467fb9882a0a64d49c9b5ecf167369ea62a3fe5348e2401153162b0ccadecdb128492c94be36ebb881c3c42659626d86eda8
e263a343d4 test: rpc_users: Make variable names more clear. (Carl Dong)
830dc2dd0f test: rpc_users: Also test rpcauth.py with specified password. (Carl Dong)
c73d871799 test: rpc_users: Add function for testing auth params. (Carl Dong)
604e2a997f test: rpc_users: Add function for auth'd requests. (Carl Dong)
Pull request description:
Fixes#14758
First two commits are tidy-ups which I feel are worthwhile as they are very straightforward, cut down the file by 50%, and made the final diff more minimal. Happy to squash after review.
ACKs for top commit:
laanwj:
ACK e263a343d4
Tree-SHA512: aa75c48570a87060238932d4c68e17234e158077f6195fb4917367e1ecc565e3cd8dd0ae51f9159ddd3d03742739680391bc1246454302db22d4a608c0633e80
751549b52a contrib: guix: Additional clarifications re: substitutes (Carl Dong)
cd3e947f50 contrib: guix: Various improvements. (Carl Dong)
8dff3e48a9 contrib: guix: Clarify SOURCE_DATE_EPOCH. (Carl Dong)
3e80ec3ea9 contrib: Add deterministic Guix builds. (Carl Dong)
Pull request description:
~~**This post is kept updated as this project progresses. Use this [latest update link](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-497303718) to see what's new.**~~
Please read the `README.md`.
-----
### Guix Introduction
This PR enables building bitcoin in Guix containers. [Guix](https://www.gnu.org/software/guix/manual/en/html_node/Features.html) is a transactional package manager much like Nix, but unlike Nix, it has more of a focus on [bootstrappability](https://www.gnu.org/software/guix/manual/en/html_node/Bootstrapping.html) and [reproducibility](https://www.gnu.org/software/guix/blog/tags/reproducible-builds/) which are attractive for security-sensitive projects like bitcoin.
### Guix Build Walkthrough
Please read the `README.md`.
[Old instructions no. 4](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-497303718)
[Old instructions no. 3](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-493827011)
[Old instructions no. 2](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-471658439)
<details>
<summary>Old instructions no. 1</summary>
In this PR, we define a Guix [manifest](https://www.gnu.org/software/guix/manual/en/html_node/Invoking-guix-package.html#profile_002dmanifest) in `contrib/guix/manifest.scm`, which declares what packages we want in our environment.
We can then invoke
```
guix environment --manifest=contrib/guix/manifest.scm --container --pure --no-grafts --no-substitutes
```
To have Guix:
1. Build an environment containing the packages we defined in our `contrib/guix/manifest.scm` manifest from the Guix bootstrap binaries (see [bootstrappability](https://www.gnu.org/software/guix/manual/en/html_node/Bootstrapping.html) for more details).
2. Start a container with that environment that has no network access, and no access to the host's filesystem except to the `pwd` that it was started in.
3. Drop you into a shell in that container.
> Note: if you don't want to wait hours for Guix to build the entire world from scratch, you can eliminate the `--no-substitutes` option to have Guix download from available binary sources. Note that this convenience doesn't necessarily compromise your security, as you can check that a package was built correctly after the fact using `guix build --check <packagename>`
Therefore, we can perform a build of bitcoin much like in Gitian by invoking the following:
```
make -C depends -j"$(nproc)" download && \
cat contrib/guix/build.sh | guix environment --manifest=contrib/guix/manifest.scm --container --pure --no-grafts --no-substitutes
```
We don't include `make -C depends -j"$(nproc)" download` inside `contrib/guix/build.sh` because `contrib/guix/build.sh` is run inside the container, which has no network access (which is a good thing).
</details>
### Rationale
I believe that this represents a substantial improvement for the "supply chain security" of bitcoin because:
1. We no longer have to rely on Ubuntu for our build environment for our releases ([oh the horror](72bd4ab867/contrib/gitian-descriptors/gitian-linux.yml (L10))), because Guix builds everything about the container, we can perform this on almost any Linux distro/system.
2. It is now much easier to determine what trusted binaries are in our supply chain, and even make a nice visualization! (see [bootstrappability](https://www.gnu.org/software/guix/manual/en/html_node/Bootstrapping.html)).
3. There is active effort among Guix folks to minimize the number of trusted binaries even further. OriansJ's [stage0](https://github.com/oriansj/stage0), and janneke's [Mes](https://www.gnu.org/software/mes/) all aim to achieve [reduced binary boostrap](http://joyofsource.com/reduced-binary-seed-bootstrap.html) for Guix. In fact, I believe if OriansJ gets his way, we will end up some day with only a single trusted binary: hex0 (a ~500 byte self-hosting hex assembler).
### Steps to Completion
- [x] Successfully build bitcoin inside the Guix environment
- [x] Make `check-symbols` pass
- [x] Do the above but without nasty hacks
- [x] Solve some of the more innocuous hacks
- [ ] Make it cross-compile (HELP WANTED HERE)
- [x] Linux
- [x] x86_64-linux-gnu
- [x] i686-linux-gnu
- [x] aarch64-linux-gnu
- [x] arm-linux-gnueabihf
- [x] riscv64-linux-gnu
- [ ] OS X
- [ ] x86_64-apple-darwin14
- [ ] Windows
- [ ] x86_64-w64-mingw32
- [ ] Maybe make importer for depends syntax
- [ ] Document build process for future releases
- [ ] Extra: Pin the revision of Guix that we build with with Guix [inferiors](https://www.gnu.org/software/guix/manual/en/html_node/Inferiors.html)
### Help Wanted
[Old content no. 3](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-483318210)
[Old content no. 2](https://github.com/bitcoin/bitcoin/pull/15277#issuecomment-471658439)
<details>
<summary>Old content no. 1</summary>
As of now, the command described above to perform a build of bitcoin a lot like Gitian works, but fails at the `check-symbols` stage. This is because a few dynamic libraries are linked in that shouldn't be.
Here's what `ldd src/bitcoind` looks like when built in a Guix container:
```
linux-vdso.so.1 (0x00007ffcc2d90000)
libdl.so.2 => /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libdl.so.2 (0x00007fb7eda09000)
librt.so.1 => /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/librt.so.1 (0x00007fb7ed9ff000)
libstdc++.so.6 => /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/libstdc++.so.6 (0x00007fb7ed87c000)
libpthread.so.0 => /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libpthread.so.0 (0x00007fb7ed85b000)
libm.so.6 => /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libm.so.6 (0x00007fb7ed6da000)
libgcc_s.so.1 => /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/libgcc_s.so.1 (0x00007fb7ed6bf000)
libc.so.6 => /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libc.so.6 (0x00007fb7ed506000)
/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007fb7ee3a0000)
```
And here's what it looks in one of our releases:
```
linux-vdso.so.1 (0x00007ffff52cd000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f87726b4000)
librt.so.1 => /usr/lib/librt.so.1 (0x00007f87726aa000)
libm.so.6 => /usr/lib/libm.so.6 (0x00007f8772525000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x00007f877250b000)
libc.so.6 => /usr/lib/libc.so.6 (0x00007f8772347000)
/lib64/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007f8773392000)
```
~~I suspect it is because my script does not apply the gitian-input patches [described in the release process](https://github.com/bitcoin/bitcoin/blob/master/doc/release-process.md#fetch-and-create-inputs-first-time-or-when-dependency-versions-change) but there is no description as to how these patches are applied.~~ It might also be something else entirely.
Edit: It is something else. It appears that the gitian inputs are only used by [`gitian-win-signer.yml`](d6e700e40f/contrib/gitian-descriptors/gitian-win-signer.yml (L14))
</details>
### How to Help
1. Install Guix on your distro either [from source](https://www.gnu.org/software/guix/manual/en/html_node/Requirements.html) or perform a [binary installation](https://www.gnu.org/software/guix/manual/en/html_node/Binary-Installation.html#Binary-Installation)
2. Try out my branch and the command described above!
ACKs for top commit:
MarcoFalke:
Thanks for the replies. ACK 751549b52a
laanwj:
ACK 751549b52a
Tree-SHA512: 50e6ab58c6bda9a67125b6271daf7eff0ca57d0efa8941ed3cd951e5bf78b31552fc5e537b1e1bcf2d3cc918c63adf19d685aa117a0f851024dc67e697890a8d
- Clearer and more accurate prose
- Pin `guix pull' to commit rather than branch
- Just use `use-module' instead of `define-module'
- Use `bash-minimal' instead of `bash'
- Remove unneeded `tcsh' from manifest
- Explicitly use `python-3.7'
- Add comments about how {native,cross}-toolchains are produced and
why
93ce4a0b6f Move WatchOnly stuff from SigningProvider to CWallet (Andrew Chow)
8f5b81e6ed Remove CCryptoKeyStore and move all of it's functionality into CWallet (Andrew Chow)
37a79a4fcc Move various SigningProviders to signingprovider.{cpp,h} (Andrew Chow)
16f8096e91 Move KeyOriginInfo to its own header file (Andrew Chow)
d9becff4e1 scripted-diff: rename CBasicKeyStore to FillableSigningProvider (Andrew Chow)
a913e3f2fb Move HaveKey static function from keystore to rpcwallet where it is used (Andrew Chow)
c7797ec655 Remove CKeyStore and squash into CBasicKeyStore (Andrew Chow)
1b699a5083 Add HaveKey and HaveCScript to SigningProvider (Andrew Chow)
Pull request description:
This PR compresses the `CWallet` chain of inheritance from 5 classes to 3 classes. `CBasicKeyStore` is renamed to `FillableSigningProvider` and some parts of it (the watchonly parts) are moved into `CWallet`. `CKeyStore` and `CCrypoKeyStore` are completely removed. `CKeyStore`'s `Have*` functions are moved into `SigningProvider` and the `Add*` moved into `FillableSigningProvider`, thus allowing it to go away entirely. `CCryptoKeyStore`'s functionality is moved into `CWallet`. The new inheritance chain is:
```
SigningProvider -> FillableSigningProvider -> CWallet
```
`SigningProvider` now is the class the provides keys and scripts and indicates whether keys and scripts are present. `FillableSigningProvider` allows keys and scripts to be added to the signing provider via `Add*` functions. `CWallet` handles all of the watchonly stuff (`AddWatchOnly`, `HaveWatchOnly`, `RemoveWatchOnly` which were previously in `CKeyStore`) and key encryption (previously in `CCryptoKeyStore`).
Implements the 2nd [prerequisite](https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Class-Structure-Changes#cwallet-subclass-stack) from the wallet restructure.
ACKs for top commit:
Sjors:
re-ACK 93ce4a0; it keeps `EncryptSecret`, `DecryptSecret` and `DecryptKey` in `wallet/crypter.cpp`, but makes them not static. It improves alphabetical includes, reorders some function definitions, fixes commit message, brings back lost code comment.
instagibbs:
utACK 93ce4a0b6f
Tree-SHA512: 393dfd0623ad2dac38395eb89b862424318d6072f0b7083c92a0d207fd032c48b284f5f2cb13bc492f34557de350c5fee925da02e47daf011c5c6930a721b6d3
bb326add9f Add ChaCha20Poly1305@Bitcoin AEAD benchmark (Jonas Schnelli)
99aea045d6 Add ChaCha20Poly1305@Bitcoin tests (Jonas Schnelli)
af5d1b5f4a Add ChaCha20Poly1305@Bitcoin AEAD implementation (Jonas Schnelli)
Pull request description:
This adds a new AEAD (authenticated encryption with additional data) construct optimised for small messages (like used in Bitcoins p2p network).
Includes: #15519, #15512 (please review those first).
The construct is specified here.
https://gist.github.com/jonasschnelli/c530ea8421b8d0e80c51486325587c52#ChaCha20Poly1305Bitcoin_Cipher_Suite
This aims for being used in v2 peer-to-peer messages.
ACKs for top commit:
laanwj:
code review ACK bb326add9f
Tree-SHA512: 15bcb86c510fce7abb7a73536ff2ae89893b24646bf108c6cf18f064d672dbbbea8b1dd0868849fdac0c6854e498f1345d01dab56d1c92031afd728302234686
1aecdf2063 Move wallet creation out of the createwallet rpc into its own function (Andrew Chow)
Pull request description:
Moves the wallet creation logic from within the `createwallet` rpc and into its own function within wallet.cpp.
ACKs for top commit:
jnewbery:
ACK 1aecdf2063
MarcoFalke:
ACK 1aecdf2063
Sjors:
ACK 1aecdf2 with some suggestions for followup.
Tree-SHA512: 8d26d7ff48db4f8fac12408a5a294f788b7f50a72e7eb4008fb74ff14d7400eb3970f8038a19f989eff55198fc11c0cf86f52231c62b9015eb777132edc8ea88
96b6dd468a Remove redundant pre-TopUpKeypool checks (Gregory Sanders)
Pull request description:
TopUpKeypool already has a quick check for `IsLocked()`
ACKs for top commit:
achow101:
ACK 96b6dd468a Reviewed the diff and checked that the `if (!IsLocked()) TopUpKeypool()` pattern is changed everywhere.
Tree-SHA512: 36f5ae1be611404656ac855763e569fd3b5e932db8170f39ebda74300aa02062774b2c28ce6cf00f2ccc0e3550de58df36efa9097e24f0a51f2809b8a489c95a
0d101a340c test: Add test for maxtxfee option (MarcoFalke)
177550101b wallet: Remove unreachable code in CreateTransaction (MarcoFalke)
5c1b9714cb wallet: Fix -maxtxfee check by moving it to CWallet::CreateTransaction (João Barbosa)
Pull request description:
Follow up to #16257, this PR makes `bumpfee` aware of `-maxtxfee`.
It also prevents dangling locked unspents when calling `fundrawtransaction` - because the previous check was after `LockCoin`.
ACKs for top commit:
MarcoFalke:
re-ACK 0d101a340c, only change is small test fixup
Tree-SHA512: 3464b24ae7cd4e72ed41438c6661828ba1304af020f05da62720b23668ae734e16cf47c6d97e150cc84ef631ee099b16fc786c858f3d089905845437338fd512
84edfc72e5 Update doc and CI config (qmma)
48bcb2ac24 Disable other targets when enable-fuzz is set (qmma)
Pull request description:
This is to fix https://github.com/bitcoin/bitcoin/issues/16094
When the `enable-fuzz` flag is set, disable all other binary targets.
ACKs for top commit:
MarcoFalke:
ACK 84edfc72e5 (only checked that travis compiled this)
Tree-SHA512: f4ac80526388a67709986b22de88b00bf93ab44ae31a20bd4d8923a4982ab97e015a9f13010081d6ecf6c23ae8afeac7ca9d849d198ce6ebe239aa3127151efc
8e7f930828 Add GetNewChangeDestination for getting new change Destinations (Andrew Chow)
33d13edd2b Replace CReserveKey with ReserveDestinatoin (Andrew Chow)
172213be5b Add GetNewDestination to CWallet to fetch new destinations (Andrew Chow)
Pull request description:
The wallet should give out destinations instead of keys. It should be the one that handles the conversion from key to destination and the setting of the label, not the caller. In order to do this, two new member functions are introduced `GetNewDestination()` and `GetNewChangeDestination()`. Additionally, `CReserveKey` is changed to be `ReserveDestination` and represents destinations whose keys can be returned to the keypool.
ACKs for top commit:
instagibbs:
re-utACK 8e7f930828
sipa:
ACK 8e7f930828. Concept ACK as this gives a much cleaner abstraction to work with, and light code review ACK.
laanwj:
ACK 8e7f930828
Tree-SHA512: 5be7051409232b71e0ef2c1fd1a3e76964ed2f5b14d47d06edc2ad3b3687abd0be2803a1adc45c0433aa2c3bed172e14f8a7e9f4a23bff70f86260b5a0497500
b6fb617aaa rpc: switch to using RPCHelpMan.Check() (Karl-Johan Alm)
c7a9fc234f Make the RPCHelpMan aware of JSONRPCRequest and add Check() helper (Karl-Johan Alm)
5c5e32bbe3 rpc: migrate JSONRPCRequest functionality into request.cpp (Karl-Johan Alm)
0ab8ba1ac6 rpc: fix RPC help requirements for getblocktemplate (Karl-Johan Alm)
Pull request description:
Every single RPC call has a helper-section at the start, which throws a help string if the user asks for help or if the user provided too few/many arguments.
```C++
const RPCHelpMan help{...};
if (request.fHelp || !help.IsValidNumArgs(request.params.size())) {
throw std::runtime_error(help.ToString());
}
```
or (older version)
```C++
if (request.fHelp || request.params.size() < min || request.params.size() > max)
throw std::runtime_error(
RPCHelpMan{...}.ToString()
);
```
It seems like an obvious improvement, and less copy-pasting, to make `RPCHelpMan` aware of `JSONRPCRequest`, and to let it handle the checks instead. Both of the above become
```C++
RPCHelpMan{...}.Check(request);
```
which means we save roughly 3 lines per RPC command, and the `RPCHelpMan` instance is never referenced afterwards, so the approach is a tiny fraction cleaner.
This is a complete update, sans a few special case locations that had special rules. 623 lines turn into 284 (which includes the addition to `RPCHelpMan`).
ACKs for top commit:
laanwj:
code rview and lightly tested ACK b6fb617aaa
MarcoFalke:
ACK b6fb617aaa, looked at the diff, verified move-only where applicable
Tree-SHA512: eb73f47f812512905b852e313281d1c8df803db40a6188aa39d5a7586631664db6764491152a8a96769946c796dc56d38c6e3a66ddd06ba3fb9d20050e6274e1
Instead of having the same multiple lines of code everywhere
that new destinations are fetched, introduce GetNewDestination as
a member function of CWallet which does the key fetching, label
setting, script generation, and destination generation.
Moves all of the various SigningProviders out of sign.{cpp,h} and
keystore.{cpp,h}. As such, keystore.{cpp,h} is also removed.
Includes and the Makefile are updated to reflect this. Includes were largely
changed using:
git grep -l "keystore.h" | xargs sed -i -e 's;keystore.h;script/signingprovider.h;g'
64fee48944 qt: Assert QMetaObject::invokeMethod result (João Barbosa)
f27bd96b5f gui: Fix missing qRegisterMetaType(WalletModel*) (João Barbosa)
Pull request description:
Invalid/wrong dynamic calls aren't verified by the compiler. This PR asserts those dynamic calls. Once we bump Qt to at least 5.10 these can be refactored to use the `invokeMethod` overload that allows connecting to lambdas or member pointers, which are compile checked.
For reference, one of the overloaded versions is https://doc.qt.io/qt-5/qmetaobject.html#invokeMethod-5.
ACKs for top commit:
laanwj:
ACK 64fee48944
Tree-SHA512: d332e5d7eb2c7be5d3fe90e2e4ff20a67800b9664f6637c122a23647a964f7915703d3f086e2de440f695cfe14de268ff581d0092b7736e911952a4f4d248e25
