3fe836b78d [moveonly] Extract RescanWallet to handle a simple rescan (Ben Woosley)
Pull request description:
Where the outcome does not depend on the result, apart from a simple
success check.
Tree-SHA512: e0d29c6fc0c7f99a730289e5a80deb586b2848aead56b5198a71ef01f65374812468dfd57be0b8b076eb9be4090d5101d28d979a1d5c3d2f1caeca77b303e90e
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
27ee53c1ae wallet: Add error handling. Check return value of ParseUInt32(...) in ParseHDKeypath(...). (practicalswift)
7223263899 wallet: Add tests for ParseHDKeypath(...) (practicalswift)
Pull request description:
Add error handling. Check return value of `ParseUInt32(...)` in `ParseHDKeypath(...)`.
`ParseUInt32(...)` returns `false` if the entire string could not be parsed or when an overflow or underflow occurred. In such case the uninitialized variable `number` would be used in the calculation of `path` (prior to this commit).
An example key path triggering this is `m/0/4294967296`:
```
ParseHDKeypath("m/0/4294967296", keypath);
```
`4294967296` is `1` + `0xFFFFFFFF` (`uint32_t` max: `4294967295`).
Introduced in a4b06fb42e which was merged into `master` 14 hours ago as part of #13557 ("BIP 174 PSBT Serializations and RPCs").
Tree-SHA512: e5ff423f67c18d82c1231bde6343587a453e793c32004d93dc9b61be6d9372b57a6b2c9978d9eb1000d6cc82fd180f2486013f928dca737fb92daad22c16e467
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
Added functional tests for PSBT that test the RPCs. Also added all
of the BIP 174 test vectors (except for the updater tests) in the
functional tests.
Added a Unit test for the BIP 174 updater test vector.
walletprocesspsbt takes a PSBT format transaction, updates the
PSBT with any inputs related to this wallet, signs, and finalizes
the transaction. There is also an option to not sign and just
update.
walletcreatefundedpsbt creates a PSBT from user provided data
in the same form as createrawtransaction. It also funds the transaction
and takes an options argument in the same form as fundrawtransaction.
The resulting PSBT is blank with no input or output data filled
in.
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
702ae1e21a [RPC] [wallet] allow getbalance to use min_conf and watch_only without accounts. (John Newbery)
cf15761f6d [wallet] GetBalance can take a min_depth argument. (John Newbery)
0f3d6e9ab7 [wallet] factor out GetAvailableWatchOnlyBalance() (John Newbery)
7110c830f8 [wallet] deduplicate GetAvailableCredit logic (John Newbery)
ef7bc8893c [wallet] Factor out GetWatchOnlyBalance() (John Newbery)
4279da4785 [wallet] GetBalance can take an isminefilter filter. (John Newbery)
Pull request description:
#12953 inadvertently removed the functionality to call `getbalance "*" <int> <bool>` to get the wallet's balance with either minconfs or include_watchonly.
This restores that functionality (when `-deprecatedrpc=accounts`), and also makes it possible to call ``getbalance minconf=<int> include_watchonly=<bool>` when accounts are not being used.
Tree-SHA512: 67e84de9291ed6d34b23c626f4dc5988ba0ae6c99708d02b87dd3aaad3f4b6baa6202a66cc2dadd30dd993a39de8036ee920fcaa8cbb1c5dfe606e6fac183344
3c292cc19 ScanforWalletTransactions should mark input txns as dirty (Gregory Sanders)
Pull request description:
I'm hitting a corner case in my mainnet wallet where I load a restore a wallet, call `rescanblockchain` from RPC, and it's "double counting" an output I've sent to myself since currently it never marks input transactions as dirty. This is fixed by a restart of the wallet.
Note that this only happens with keys with birthdate *after* the blocks containing the spent funds which gets scanned on startup, so it's hard to test without a set seed function.
Tree-SHA512: ee1fa152bb054b57ab4c734e355df10d241181e0372c81d583be61678fffbabe5ae60b09b05dc1bbbcfb4838df9d8538791d4c1d80a09b84d78ad2f50dcb0a61
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input hashTx
rather than the current now tx.
d0b9405f96 Refactors `keystore.h` type aliases. (251)
Pull request description:
This pull request frees `keystore.h` from type alias declarations that have been declared at file scope level.
`keystore.h` has various type aliases that have been declared ~3 - 6 years ago at file scope level, which can either be encapsulated or removed.
Where type alias declarations are encapsulated at the appropriate scope and access level, C++11's `using` notation is used in favor of the `typedef` notation.
Tree-SHA512: 1395cdc63e0c7ff5a1b1721675ad4416f71f507e999bd4ba019f03457cbfc08877848f10a8db7f5ccd2cd5ca3f5a291c986616f7703172fb6d79fba7447ffba8
075429a482 Use common SetDataDir method to create temp directory in tests. (winder)
Pull request description:
Took a stab at #12574
Created a `getPath` method which can be used with the `TestingSetup` fixture to create a temp directory. Updated tests using temp directories to use this method.
I tried setting up a `BOOST_GLOBAL_FIXTURE` to create a truly global path for all tests but was getting linker errors when including `boost/test/unit_test.hpp` in `test_bitcoin.cpp`. Even if I had gotten the linking to work, it looks like `make check` invokes the test binary a bunch of times, so it may not have worked anyway.
Tree-SHA512: b51d0f5fada5d652ccc9362596cf98a742aa47f5daf94f189b5f034d8c035c85d095377befdcff7fb4247154d5160e8c500d70f554a2158e2c185a9d24f694f1
This squashed commit either encapsulates type alias declarations at the appropriate scope; or removes type aliases that are not used.
The encapsulated type aliases are declared using C++11's `using` notation in favor of the `typedef` notation.
I thought we had removed this a long time ago, TBH, its really
confusing feedback to users that we display whether a tx was
broadcast to immediate neighbor nodes, given that has little
indication of whether the tx propagated very far.
