9f9db39041 QA/mininode: Send all headers upfront in send_blocks_and_test to avoid sending an unconnected one (Luke Dashjr)
Pull request description:
While this doesn't currently trigger any problems, the network protocol does expect headers to be sent connectable in normal circumstances, and if too many are sent out of order will disconnect the peer.
ACKs for commit 9f9db3:
Tree-SHA512: 25b88718e4ba3d31aed2de7ece23fab9a0737fd6536c5e618ea8eb5a3a217dab0dffaebc4892df7993bcea7efb7c4fb5085fabebe99535b8f7fdde3c19df54ff
c634b1e20 [POLICY] Make sending to future native witness outputs standard (Pieter Wuille)
Pull request description:
As discussed in the April 18 2019 IRC meeting.
This makes sending to future Segwit versions via native outputs (bech32) standard for relay, mempool acceptance, and mining. The reasons are:
* This may interfere with smooth adoption of future segwit versions, if they're defined (by the sender wallet/node).
* It violates BIP173 ("Version 0 witness addresses are always 42 or 62 characters, but implementations MUST allow the use of any version."), though admittedly this code was written before BIP173.
* It doesn't protect much, as P2SH-embedded segwit cannot be filtered in this way.
* As a general policy, the sender shouldn't care what the receiver likes his outputs to be.
Note that _spending_ such outputs (including P2SH-embedded ones) remains nonstandard, as that is actually required for softfork safety.
ACKs for commit c634b1:
MarcoFalke:
utACK c634b1e207
harding:
Tested ACK c634b1e207
meshcollider:
utACK c634b1e207
Tree-SHA512: e37168a1be9f445a04d4280593f0a92bdae33eee00ecd803d5eb16acb5c9cfc0f1f0a1dfbd5a0cc73da2c9928ec11cbdac7911513a78f85b789ae0d00e1b5962
a014373d81 QA: Avoid re-reading config.ini unnecessarily (Luke Dashjr)
Pull request description:
BitcoinTestFramework.main already loads and stores config.ini on the object itself; just access that instead of re-reading the file to check for features
ACKs for commit a01437:
practicalswift:
utACK a014373d81
hebasto:
utACK a014373d81
Tree-SHA512: 36e3dda36cf4fae243feb1655da2891d1b78c86319be9bd9809c20054fa0cb75749370b05aa9d589a4dcab6322d8cdf4e874c5175144ed23ba63b2ed338538ca
BitcoinTestFramework.main already loads and stores config.ini on the object itself; just access that instead of re-reading the file to check for features
c87fc71f7e Bugfix: test/functional/rpc_psbt: Correct test description comment (Luke Dashjr)
097c4aa379 Bugfix: test/functional/rpc_psbt: Remove check for specific error message that depends on uncertain assumptions (Luke Dashjr)
Pull request description:
When converttopsbt is called with a signed transaction, it either fails with "TX decode failed" if one or more inputs were segwit, or "Inputs must not have scriptSigs and scriptWitnesses" otherwise.
Since no effort is made by the test to ensure the inputs are segwit or not, avoid checking the exact message used.
The error code is still checked to ensure it is of the correct kind of failure.
ACKs for commit c87fc7:
instagibbs:
utACK c87fc71f7e
achow101:
utACK c87fc71f7e
Tree-SHA512: 61312b5d49aa50652902f30ba9693dfba9e5b7e6478f23becda20202d8b328ddb3e040f2199b617a68df133a5f1f8b5d68bc19d4621303f17c1963dca01bd9ef
faca95effd qa: Make swap_magic_bytes in p2p_invalid_messages atomic (MarcoFalke)
Pull request description:
Otherwise, this will lead to errors logged in the network thread:
https://travis-ci.org/MarcoFalke/bitcoin/jobs/513076282#L2765
ACKs for commit faca95:
Tree-SHA512: 8bc8280f9c0e8d40bc68c0ff1cab1c3386cbfef0728dbab5f29c2606dd65a9ac3c695b0c286be707a9f2bd62a6f87ac2032d7749fc2cf8b9fa1eba3c4cf70933
fa1c8e297 Resolve the qt/guiutil <-> qt/optionsmodal CD (251)
Pull request description:
This pull request attempts to resolve the `qt/guiutil` <-> `qt/optionsmodel` circular dependency.
The `Intro` class in `qt/intro` has a static member function `getDefaultDataDirectory` which is used by `qt/optionsmodel` and creates the circular dependency
`qt/guiutil -> qt/walletmodel -> qt/optionsmodel -> qt/intro -> qt/guiutil`.
This circular dependency is resolved by moving `Intro::getDefaultDataDirectory` to `GUIUtil::getDefaultDataDirectory` without modifying the implementation.
ACKs for commit fa1c8e:
MarcoFalke:
utACK fa1c8e2978
promag:
utACK fa1c8e2.
hebasto:
utACK fa1c8e2978
practicalswift:
utACK fa1c8e2978
jonasschnelli:
utACK fa1c8e2978
Tree-SHA512: 58cc4aee937c943d8de9dc97ef1789decfddb0287308f44e7e3a3b497c19e51da184988e17207544fff410168ec98dd49a3e62c47e84ad1f0cf6ef7247a80fb5
This pull request attempts to resolve the `qt/guiutil` <-> `qt/optionsmodel`
circular dependency.
The circular dependency is resolved by moving the `Intro::getDefaultDataDirectory`
member function to `GUIUtil::getDefaultDataDirectory`.
b67978529a Add comments to Python ECDSA implementation (John Newbery)
8c7b9324ca Pure python EC (Pieter Wuille)
Pull request description:
This removes the dependency on OpenSSL for the interaction tests, by providing a pure-Python
toy implementation of secp256k1.
ACKs for commit b67978:
jnewbery:
utACK b67978529a
Tree-SHA512: 181445eb08b316c46937b80dc10aa50d103ab1fdddaf834896c0ea22204889f7b13fd33cbcbd00ddba15f7e4686fe0d9f8e8bb4c0ad0e9587490c90be83966dc
418d3230f8 Resolve the checkpoints <-> validation CD. (251)
Pull request description:
This pull request attempts to resolve the `checkpoints -> validation -> checkpoints` circular dependency.
The circular dependency is resolved by moving the `CheckPoints::GetLastCheckpoint(const CCheckpointData& data)` function to `validation.cpp` where it used exclusively by the private function `ContextualCheckBlockHeader(const CBlockHeader& block, CValidationState& state, const CChainParams& params, const CBlockIndex* pindexPrev, int64_t nAdjustedTime)`.
ACKs for commit 418d32:
promag:
utACK 418d323, only `GetLastCheckpoint` usage is in `validation.cpp` and so makes sense to move it there.
practicalswift:
utACK 418d3230f8
MarcoFalke:
utACK 418d3230f8
sipa:
utACK 418d3230f8
Tree-SHA512: 03c3556bc192e65f5e3fa76fd545d4ee7d63d3fb06b132f7a1fa6131aa21ddd2e5b2d19e2222dfe524f422daaca30efde219bed188db8c74ff4b088876b5bc16
c7efb652f3 blockfilter: Update BIP 158 test vectors. (Jim Posen)
19308c9e21 rpc: Add getblockfilter RPC method. (Jim Posen)
ff35105096 init: Add CLI option to enable block filter index. (Jim Posen)
accc8b8b18 index: Access functions for global block filter indexes. (Jim Posen)
2bc90e4e7b test: Unit test for block filter index reorg handling. (Jim Posen)
6bcf0998c0 test: Unit tests for block index filter. (Jim Posen)
b5e8200db7 index: Implement lookup methods on block filter index. (Jim Posen)
75a76e3619 index: Implement block filter index with write operations. (Jim Posen)
2ad2338ef9 serialize: Serialization support for big-endian 32-bit ints. (Jim Posen)
ba6ff9a6f7 blockfilter: Functions to translate filter types to/from names. (Jim Posen)
62b7a4f094 index: Ensure block locator is not stale after chain reorg. (Jim Posen)
4368384f1d index: Allow atomic commits of index state to be extended. (Jim Posen)
Pull request description:
This introduces a new BlockFilterIndex class, which is required for BIP 157 support.
The index is uses the asynchronous BaseIndex infrastructure driven by the ValidationInterface callbacks. Filters are stored sequentially in flat files and the disk location of each filter is indexed in LevelDB along with the filter hash and header. The index is designed to ensure persistence of filters reorganized out of the main chain to simplify the BIP 157 net implementation.
Stats (block height = 565500):
- Syncing the index from scratch takes 45m
- Total index size is 3.8 GiB
ACKs for commit c7efb6:
MarcoFalke:
utACK c7efb652f3
ryanofsky:
Slightly tested ACK c7efb652f3 (I just rebuilt the index with the updated PR and tested the RPC). Changes since last review: rebase, fixed compile errors in internal commits, new comments, updated error messages, tweaked cache size logic, renamed commit method, renamed constants and globals, fixed whitespace, extra BlockFilterIndex::Init error check.
Tree-SHA512: f8ed7a9b6f76df45933aa5eba92b27b3af83f6df2ccb3728a5c89eec80f654344dc14f055f6f63eb9b3a7649dd8af6553fe14969889e7e2fd2f8461574d18f28
fab6a0a659 test: Add test that addmultisigaddress fails for watchonly addresses (MarcoFalke)
fad81d870a test: Fixup creatmultisig documentation and whitespace (MarcoFalke)
Pull request description:
Just to make sure this is not regressed on accidentally in the future
ACKs for commit fab6a0:
jonatack:
ACK fab6a0a659
Tree-SHA512: bf8dcbc752f8910902a995e55ce486621156aa01f112990344815c4aab980298dfecc108e78245a8986a00c3871338ad16fc818a1bce9dfc6b37b9c88851e39d
aa410c2b17 rpc: Validate maxfeerate with AmountFromValue (João Barbosa)
Pull request description:
With this change `maxfeerate` can also be set as a string, accordingly to the help test:
```
maxfeerate (numeric or string,
```
Beside, there are no tests for the removed errors.
ACKs for commit aa410c:
meshcollider:
utACK aa410c2b17
MarcoFalke:
utACK aa410c2b17 Good catch
Tree-SHA512: f3bfea91dc7daa943729e270585dbf333055aeda805fbd01eaab20a7e0e6147382647c11525334382d198df0d3d45da6102b541efda5a1361f96271c98d5d89d
184f8785f wallet_bumpfee.py: add test for change key preservation (Gregory Sanders)
d08becff8 add functional tests for feerate bumpfee with adding inputs (Gregory Sanders)
0ea47ba7b generalize bumpfee to add inputs when needed (Gregory Sanders)
Pull request description:
When targeting a feerate using `bumpfee`, call a new function that directly uses `CWallet::CreateTransaction` and coin control to get the desired result. This allows us to get a superset of previous behavior, with an arbitrary RBF bump of a transaction provided it passes the preconditional checks and spare confirmed utxos are available.
Note(s):
0) The coin selection will use knapsack solver for the residual selection.
1) This functionality, just like knapsack coin selection in general, will hoover up negative-value inputs when given the chance.
2) Newly added inputs must be confirmed due to current Core policy. See error: `replacement-adds-unconfirmed`
3) Supporting this with `totalFee` is difficult since the "minimum total fee" option in `CreateTransaction` logic was (rightly)taken out in #10390 .
ACKs for commit 184f87:
jnewbery:
utACK 184f8785f7
Tree-SHA512: fb6542bdfb2c6010e328ec475cf9dcbff4eb2b1a1b27f78010214534908987a5635797196fa05edddffcbcf2987335872dc644a99261886d5cbb34a8f262ad3e
fafe5f0d09 test: Remove unused imports (MarcoFalke)
fa16a09215 scripted-diff: use self.sync_* methods (MarcoFalke)
faf77f9b90 test: Pass self to test_simple_bumpfee_succeeds (MarcoFalke)
fa6dc7c5c3 test: Add BitcoinTestFramework::sync_* methods (MarcoFalke)
fafe008cb4 test: Pass at most one node group to sync_all (MarcoFalke)
fa4680ed09 scripted-diff: Rename sync_blocks to send_blocks to avoid name collisions and confusion (MarcoFalke)
Pull request description:
This adds methods to the test framework that can be called by just `self.sync_*()`.
This avoids having to import the underlying util method. Also, in the default case, where all nodes are synced this avoid having to pass `self.nodes` explicitly.
So the effective changes are:
```diff
@@
-from test_framework.util import sync_blocks, sync_mempools
@@
- sync_blocks(self.nodes)
+ self.sync_blocks()
@@
- sync_mempools(self.nodes)
+ self.sync_mempools()
ACKs for commit fafe5f:
promag:
utACK fafe5f0.
jonatack:
ACK fafe5f0d09, nice simplification.
Tree-SHA512: 5c81840edf9fb3c5de2d7bf95ca36a5a8d23567cd1479a0f4044547c2080e9a3c5cf375357bc8eebb5b68829be050a171ab2512cfd47b89feed51fe3bad2cd72
4d074e84a2 [build] Move AnalyzePSBT from psbt.cpp to node/psbt.cpp (Russell Yanofsky)
fd509bd1f7 [docs] Document src subdirectories and different libraries (John Newbery)
9eaeb7fb8d [build] Move wallet load functions to wallet/load unit (John Newbery)
91a25d1e71 [build] Add several util units (John Newbery)
99517866b6 [build] Move several units into common libraries (John Newbery)
0509465542 [build] Move rpc rawtransaction util functions to rpc/rawtransaction_util.cpp (John Newbery)
1acc61f874 [build] Move rpc utility methods to rpc/util (John Newbery)
4a75c9d651 [build] Move policy settings to new src/policy/settings unit (John Newbery)
fdf8888b6f [build] Move CheckTransaction from lib_server to lib_consensus (John Newbery)
Pull request description:
This is a move-only commit. No code is changing and the moves can be easily verified with:
```sh
git log -p -n1 --color-moved=dimmed_zebra
```
This commit moves functions and variables that wallet code depends on out of libbitcoin_server.a, so the bitcoin-wallet tool can be built without libbitcoin_server.a in #15639, and attempting to access server state from wallet code will result in link errors instead of silently broken code.
List of moves:
- `CheckTransaction` moves from `consensus/tx_verify.cpp` to `consensus/tx_check.cpp`
- `urlDecode` moves from `httpserver.cpp` to `util/url.cpp`
- `TransactionErrorString` moves from `node/transaction.cpp` to `util/error.cpp`
- `StringForFeeReason` and `FeeModeFromString` move from `policy/fees.cpp` to `util/fees.cpp`
- `incrementalRelayFee` `dustRelayFee` and `nBytesPerSigOp` move from `policy/policy.cpp` to `policy/settings.cpp`
- `SignalsOptInRBF` moves from `policy/rbf.cpp` to `util/rbf.cpp`
- `fIsBareMultisigStd` moves from `validation.cpp` to `policy/settings.cpp`
- `ConstructTransaction` `TxInErrorToJSON` and `SignTransaction` move from `rpc/rawtransaction.cpp` to `rpc/rawtransaction_util.cpp`
- `RPCTypeCheck` `RPCTypeCheckArgument` `RPCTypeCheckObj` `AmountFromValue` `ParseHashV``ParseHashO` `ParseHexV` `ParseHexO` `HelpExampleCli` and `HelpExampleRpc` move from `rpc/server.cpp` to `rpc/util.cpp`
- `AmountHighWarn` and `AmountErrMsg` move from `ui_interface.cpp` to `util/error.cpp`
- `FormatStateMessage` and `strMessageMagic` move from `validation.cpp` to `util/validation.cpp`
- `VerifyWallets` `LoadWallets` `StartWallets` `FlushWallets` `StopWallets` and `UnloadWallets` move from `wallet/init.cpp` to `wallet/node.cpp`
ACKs for commit 4d074e:
jnewbery:
utACK 4d074e84a2 (checked by doing the rebase myself and verifying no difference between my branch and 4d074e84a2)
Tree-SHA512: 5e1604a9fb06475f2b96da0de0baa8330f4dda834dc20a0183ef11e1e4c27631d1d1bbb9abf0054efc03d56945fdf9920f63366b6a4f200f665b742a479ff75c
fae38c3dc6 doc: Fix all typos reported by codespell (MarcoFalke)
fa9058f0ed doc: Add release notes for 15629 (MarcoFalke)
fa4a922d78 qa: Add test for missing testnet section in conf file (MarcoFalke)
dddd6f0f58 init: Throw error when network specific config is ignored (MarcoFalke)
Pull request description:
This should have no effect on mainnet users, but simplifies testing, where config settings are currently ignored with only a warning. Fix this by making it an error.
Issues:
* bitcoin client 0.17.0 ignores wallet's name (file) #14523
* Can't set custom rpcport on testnet #13777
* ...
ACKs for commit fae38c:
Tree-SHA512: 2e209526898eea6e444c803ec2666989cee4ca137492d32984998733c50a70056cb54657df8dc3027a6a0612738a8afce0bc35824b868c5f22281e00e0188530
833d98ae0 [wallet] Remove unnecessary Chain::Lock parameter from ResendWalletTransactions (John Newbery)
52b760fc6 [wallet] Schedule tx rebroadcasts in wallet (John Newbery)
f463cd107 [wallet] Keep track of the best block time in the wallet (John Newbery)
Pull request description:
Remove the `Broadcast()`/`ResendWalletTransactions()` notification from the Validation interface.
Closes#15619. See that issue for discussion.
ACKs for commit 833d98:
ryanofsky:
utACK 833d98ae07. No changes, just rebase.
Tree-SHA512: 7689f2083608ebad8c95ab6692f7842754e1ebe5508bc926a89cad7105cce41007648f37341ba5feb92b30a7aa87acd3abf264a4f1874e35a7161553f6ff3595
Adds the following util units and adds them to libbitcoin_util:
- `util/url.cpp` takes `urlDecode` from `httpserver.cpp`
- `util/error.cpp` takes `TransactionErrorString` from
`node/transaction.cpp` and `AmountHighWarn` and `AmountErrMsg` from
`ui_interface.cpp`
- `util/fees.cpp` takes `StringForFeeReason` and `FeeModeFromString` from `policy/fees.cpp`
- `util/rbf.cpp` takes `SignalsOptInRBF` from `policy/rbf.cpp`
- 'util/validation.cpp` takes `FormatStateMessage` and `strMessageMagic` from 'validation.cpp`
This moves the following policy settings functions and globals to a new
src/policy/settings unit in lib_server:
- `incrementalRelayFee`
- `dustRelayFee`
- `nBytesPerSigOp`
- `fIsBareMultisigStd`
These settings are only required by the node and should not be accessed
by other libraries.
Removes the now-unused Broadcast/ResendWalletTransactions interface from
validationinterface.
The wallet_resendwallettransactions.py needs a sleep added at the start
to make sure that the rebroadcast scheduler is warmed up before the next
block is mined.
b5d398772 Take non-importing keys into account for spendability warning in descriptor import (Pieter Wuille)
6e597001a Import all origin info in importmulti; even for non-importing pubkeys (Pieter Wuille)
9a93c91c8 Keep full pubkeys in FlatSigningProvider::origins (Pieter Wuille)
Pull request description:
This fixes#15743 and #15742.
Since #15263, pubkeys are no longer imported for non-PKH (or WPKH, or any wrapped form of those) outputs, as that would incorrectly mark outputs to single-key versions of multisig policies as watched.
As a side effect, this change also caused origin info not to be imported anymore for multisig policies.
Fix this by plumbing through the full pubkey information for origins in FlatSigningProvider, and then importing all origin info we have in `importmulti` (knowing more never hurts, and additional origin information has no negative consequences like importing the pubkeys themselves).
ACKs for commit b5d398:
MeshCollider:
utACK b5d3987724
Tree-SHA512: 37caa2be8d01b8baa12f70a58eaa7c583f5f0afbe012e02936dd8790dc5dc852f880b77258b34ddb68cae30c029585f2d1c4f5d00015380557a1e8b471e500f3
