9c4dc597dd Use LOCK macros for non-recursive locks (Russell Yanofsky)
1382913e61 Make LOCK, LOCK2, TRY_LOCK work with CWaitableCriticalSection (Russell Yanofsky)
ba1f095aad MOVEONLY Move AnnotatedMixin declaration (Russell Yanofsky)
41b88e9337 Add unit test for DEBUG_LOCKORDER code (Russell Yanofsky)
Pull request description:
Make LOCK macros work with non-recursive mutexes, and use wherever possible for better deadlock detection.
Also add unit test for DEBUG_LOCKORDER code.
Tree-SHA512: 64ef209307f28ecd0813a283f15c6406138c6ffe7f6cbbd084161044db60e2c099a7d0d2edcd1c5e7770a115e9b931b486e86c9a777bdc96d2e8a9f4dc192942
Lowering the minimum relay fee is only useful when many nodes in the
p2p network also lower the fee, so to make it easier to understand
progress on that front, this includes the value of the minfeefilter in
getpeerinfo, so you at least have visibility to what fees your neighbours
are currently accepting.
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
793290f940 Net: Fixed a race condition when disabling the network. (lmanners)
Pull request description:
This change addresses a race condition where setnetworkactive=false wouldn't always disconnect all peers.
Before this change, the following could happen:
1. Thread A -- Begins connecting to a node.
2. Thread B -- Sets kNetworkActive=false and disconnects connected nodes.
3. Thread A -- Finishes connecting and adds node to list of connected nodes.
The node that was connected from Thread A remains connected and active,
even though kNetworkActive=false.
To fix the race, disconnections when kNetworkActive=false are now handled in the main network loop.
fixes#13038
Tree-SHA512: 6d0b7a78ae956358e796efcc034cb532c2e0d824a52ae822a3899eefc7df76327519d1f2d77362c9fddf34ef860abd095d7490d7cc02d0ba7543bf1e8c8f2535
822a2a33a7 Modified in_addr6 cast in CConman class to work with msvc. (Aaron Clauson)
Pull request description:
Fix to allow net.cpp to compile with MSVC. Without this fix the `(in6_addr)IN6ADDR_ANY_INIT` implicit cast generates a compilation error.
Tree-SHA512: f21c5002401dc93564dcf8d49fbafe7c03ad4182df1616d2ee201e2e172f1d696ca7982fb5b42a3b7d6878c8649823044a858401b4172239fb4b0cc2a38db282
d45b344ffd Bucket for inbound when scheduling invs to hide tx time (Gleb)
Pull request description:
It has been brought up to my attention that current random delays mechanism (originally intended to obfuscate transaction metadata) allows to easily estimate the time a transaction was received by a node.
It may be done by connecting multiple observer nodes to the same node. Each of those nodes will generate its own schedule of delays. Combined metadata regarding those events from different sources allows an observer to estimate transaction time.
After this patch a spy won't gain additional information by just creating multiple connections to a target.
Tree-SHA512: c71dae5ff350b614cb40a8e201fd0562d3e03e3e72a5099718cd451f0d84c66d5e52bbaf0d5b4b75137514c8efdedcc6ef4df90142b360153f04ad0721545ab1
253f592909 Add stdin, stdout, stderr to ignored export list (Chun Kuan Lee)
fc6a9f2ab1 Use IN6ADDR_ANY_INIT instead of in6addr_any (Cory Fields)
908c1d7745 GCC-7 and glibc-2.27 compat code (Chun Kuan Lee)
Pull request description:
The `__divmoddi4` code was modified from https://github.com/gcc-mirror/gcc/blob/master/libgcc/libgcc2.c . I manually find the older glibc version of log2f by objdump, use `.symver` to specify the certain version.
Tree-SHA512: e8d875652003618c73e019ccc420e7a25d46f4eaff1c7a1a6bfc1770b3b46f074b368b2cb14df541b5ab124cca41dede4e28fe863a670589b834ef6b8713f9c4
This change addresses a race condition where setnetworkactive=false wouldn't always disconnect all peers.
Before this change, the following could happen:
1. Thread A -- Begins connecting to a node.
2. Thread B -- Sets kNetworkActive=false and disconnects connected nodes.
3. Thread A -- Finishes connecting and adds node to list of connected nodes.
The node that was connected from Thread A remains connected and active,
even though kNetworkActive=false.
To fix the race, disconnections when kNetworkActive=false are now handled in the main network loop.
fixes#13038
a5bca13 Bugfix: Include <memory> for std::unique_ptr (Luke Dashjr)
Pull request description:
Not sure why all these includes were missing, but it's breaking builds for some users:
https://bugs.gentoo.org/show_bug.cgi?id=652142
(Added to all files with a reference to `std::unique_ptr`)
Tree-SHA512: 8a2c67513ca07b9bb52c34e8a20b15e56f8af2530310d9ee9b0a69694dd05e02e7a3683f14101a2685d457672b56addec591a0bb83900a0eb8e2a43d43200509
4d9b4256d8 Fix typos (Dimitris Apostolou)
Pull request description:
Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.
Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
It is redundant to check for the presence of MSG_NOSIGNAL macro in
configure.ac, define HAVE_MSG_NOSIGNAL and then check whether the later
is defined in the source code. Instead we can check directly whether
MSG_NOSIGNAL is defined. Same for MSG_DONTWAIT.
In addition to that, the checks we had in configure.ac produce a
compiler warning about unused variable and thus could fail if
-Werror is present and erroneously proclaim that the macros are
not available.
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
A risk exists where a malicious DNS seeder eclipses a node by returning an enormous number of IP addresses. In this commit we mitigate this risk by limiting the number of IP addresses addrman learns to 256 per DNS seeder.
e68172ed9 Add test-before-evict discipline to addrman (Ethan Heilman)
Pull request description:
This change implement countermeasures 3 (test-before-evict) suggested in our paper: ["Eclipse Attacks on Bitcoin’s Peer-to-Peer Network"](http://cs-people.bu.edu/heilman/eclipse/).
# Design:
A collision occurs when an address, addr1, is being moved to the tried table from the new table, but maps to a position in the tried table which already contains an address (addr2). The current behavior is that addr1 would evict addr2 from the tried table.
This change ensures that during a collision, addr1 is not inserted into tried but instead inserted into a buffer (setTriedCollisions). The to-be-evicted address, addr2, is then tested by [a feeler connection](https://github.com/bitcoin/bitcoin/pull/8282). If addr2 is found to be online, we remove addr1 from the buffer and addr2 is not evicted, on the other hand if addr2 is found be offline it is replaced by addr1.
An additional small advantage of this change is that, as no more than ten addresses can be in the test buffer at once, and addresses are only cleared one at a time from the test buffer (at 2 minute intervals), thus an attacker is forced to wait at least two minutes to insert a new address into tried after filling up the test buffer. This rate limits an attacker attempting to launch an eclipse attack.
# Risk mitigation:
- To prevent this functionality from being used as a DoS vector, we limit the number of addresses which are to be tested to ten. If we have more than ten addresses to test, we drop new addresses being added to tried if they would evict an address. Since the feeler thread only creates one new connection every 2 minutes the additional network overhead is limited.
- An address in tried gains immunity from tests for 4 hours after it has been tested or successfully connected to.
# Tests:
This change includes additional addrman unittests which test this behavior.
I ran an instance of this change with a much smaller tried table (2 buckets of 64 addresses) so that collisions were much more likely and observed evictions.
```
2016-10-27 07:20:26 Swapping 208.12.64.252:8333 for 68.62.95.247:8333 in tried table
2016-10-27 07:20:26 Moving 208.12.64.252:8333 to tried
```
I documented tests we ran against similar earlier versions of this change in #6355.
# Security Benefit
This is was originally posted in PR #8282 see [this comment for full details](https://github.com/bitcoin/bitcoin/pull/8282#issuecomment-237255215).
To determine the security benefit of these larger numbers of IPs in the tried table I modeled the attack presented in [Eclipse Attacks on Bitcoin’s Peer-to-Peer Network](https://eprint.iacr.org/2015/263).
![attackergraph40000-10-1000short-line](https://cloud.githubusercontent.com/assets/274814/17366828/372af458-595b-11e6-81e5-2c9f97282305.png)
**Default node:** 595 attacker IPs for ~50% attack success.
**Default node + test-before-evict:** 620 attacker IPs for ~50% attack success.
**Feeler node:** 5540 attacker IPs for ~50% attack success.
**Feeler node + test-before-evict:** 8600 attacker IPs for ~50% attack success.
The node running feeler connections has 10 times as many online IP addresses in its tried table making an attack 10 times harder (i.e. requiring the an attacker require 10 times as many IP addresses in different /16s). Adding test-before-evict increases resistance of the node by an additional 3000 attacker IP addresses.
Below I graph the attack over even greater attacker resources (i.e. more attacker controled IP addresses). Note that test-before-evict maintains some security far longer even against an attacker with 50,000 IPs. If this node had a larger tried table test-before-evict could greatly boost a nodes resistance to eclipse attacks.
![attacker graph long view](https://cloud.githubusercontent.com/assets/274814/17367108/96f46d64-595c-11e6-91cd-edba160598e7.png)
Tree-SHA512: fdad4d26aadeaad9bcdc71929b3eb4e1f855b3ee3541fbfbe25dca8d7d0a1667815402db0cb4319db6bd3fcd32d67b5bbc0e12045c4252d62d6239b7d77c4395
Changes addrman to use the test-before-evict discipline in which an
address is to be evicted from the tried table is first tested and if
it is still online it is not evicted.
Adds tests to provide test coverage for this change.
This change was suggested as Countermeasure 3 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
eb91835 Add setter for g_initial_block_download_completed (Jonas Schnelli)
3f56df5 [QA] add NODE_NETWORK_LIMITED address relay and sync test (Jonas Schnelli)
158e1a6 [QA] fix mininode CAddress ser/deser (Jonas Schnelli)
fa999af [QA] Allow addrman loopback tests (add debug option -addrmantest) (Jonas Schnelli)
6fe57bd Connect to peers signaling NODE_NETWORK_LIMITED when out-of-IBD (Jonas Schnelli)
31c45a9 Accept addresses with NODE_NETWORK_LIMITED flag (Jonas Schnelli)
Pull request description:
Eventually connect to peers signalling NODE_NETWORK_LIMITED if we are out of IBD.
Accept and relay NODE_NETWORK_LIMITED peers in addrman.
Tree-SHA512: 8a238fc97f767f81cae1866d6cc061390f23a72af4a711d2f7158c77f876017986abb371d213d1c84019eef7be4ca951e8e6f83fda36769c4e1a1d763f787037
9ad6746ccd Use static_cast instead of C-style casts for non-fundamental types (practicalswift)
Pull request description:
A C-style cast is equivalent to try casting in the following order:
1. `const_cast(...)`
2. `static_cast(...)`
3. `const_cast(static_cast(...))`
4. `reinterpret_cast(...)`
5. `const_cast(reinterpret_cast(...))`
By using `static_cast<T>(...)` explicitly we avoid the possibility of an unintentional and dangerous `reinterpret_cast`. Furthermore `static_cast<T>(...)` allows for easier grepping of casts.
For a more thorough discussion, see ["ES.49: If you must use a cast, use a named cast"](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#es49-if-you-must-use-a-cast-use-a-named-cast) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: bd6349b7ea157da93a47b8cf238932af5dff84731374ccfd69b9f732fabdad1f9b1cdfca67497040f14eaa85346391404f4c0495e22c467f26ca883cd2de4d3c
2b839ab Update chainparams comment for more info on service bits per dnsseed (Matt Corallo)
62e7642 Fall back to oneshot for DNS Seeds which don't support filtering. (Matt Corallo)
51ae766 Use GetDesireableServiceFlags in static seeds, document this. (Matt Corallo)
fb6f6b1 bluematt's testnet-seed now supports x9 (and is just a static list) (Matt Corallo)
Pull request description:
4440710 broke inserting entries into addrman from dnsseeds which
did not support service bits, as well as static seeds. Static seeds
were already being filtered by UA for 0.13.1+ (ie NODE_WITNESS), so
simply changing the default service bits to include NODE_WITNESS
(and updating docs appropriately) is sufficient. For DNS Seeds, not
supporting NODE_WITNESS is no longer useful, so instead use
non-filtering seeds as oneshot hosts irrespective of named proxy.
I've set my testnet-seed to also support x9, though because it is simply a static host, it may be useful to leave the support off so that it is used as a oneshot to get addresses from a live node instead. I'm fine with either.
Tree-SHA512: 3f17d4d2b0b84d876981c962d2b44cb0c8f95f52c56a48c6b35fd882f6d7a40805f320ec452985a1c0b34aebddb1922709156c3ceccd1b9f8363fd7cb537d21d
This allows us to not have to update the chainparams whenever a
DNS Seed changes its filtering support, as well fixes a bug
introduced in 44407100f where returned nodes will never be
attempted.
44407100f broke inserting entries into addrman from static seeds
(as well as dnsseeds which did not support service bits). Static
seeds were already being filtered by UA for 0.13.1+ (ie
NODE_WITNESS), so simply changing the default service bits to
include NODE_WITNESS (and updating docs appropriately) is
sufficient.
For DNS Seeds, we will later fix by falling back to oneshot if a
seed does not support filtering.
57ac471 Call BannedListChanged outside of cs_setBanned lock (Jonas Schnelli)
c853812 Update ban-state in case of dirty-state during periodic sweep (Jonas Schnelli)
Pull request description:
We do currently not update the UI during periodic ban list sweeps (via dump banlist).
Fixes#11612
Tree-SHA512: bffbdcc03c63042177bdd511b0a9187c211c2b5011178481e8ee3e43a71eef1e4cd6b72f73672babab142b644f62f8b56f0aac1d26d3f19372b1f8644fec9395
3830b6e net: use CreateSocket for binds (Cory Fields)
df3bcf8 net: pass socket closing responsibility up to caller for outgoing connections (Cory Fields)
9e3b2f5 net: Move IsSelectableSocket check into socket creation (Cory Fields)
1729c29 net: split socket creation out of connection (Cory Fields)
Pull request description:
Requirement for #11227.
We'll need to create sockets and perform the actual connect in separate steps, so break them up.
#11227 adds an RAII wrapper around connection attempts, as a belt-and-suspenders in case a CloseSocket is missed.
Tree-SHA512: de675bb718cc56d68893c303b8057ca062c7431eaa17ae7c4829caed119fa3f15b404d8f52aca22a6bca6e73a26fb79e898b335d090ab015bf6456cf417fc694
We use select in ConnectSocketDirectly, so this check needs to happen before
that.
IsSelectableSocket will not be relevant after upcoming changes to remove select.