Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
9960137 Add developer notes about blocking GUI code (Russell Yanofsky)
9a61eed Use WalletBalances struct in Qt (Russell Yanofsky)
56f33ca Remove direct bitcoin calls from qt/sendcoinsdialog.cpp (Russell Yanofsky)
e872c93 Remove direct bitcoin access from qt/guiutil.cpp (Russell Yanofsky)
5884558 Remove direct bitcoin calls from qt transaction table files (Russell Yanofsky)
3cab2ce Remove direct bitcoin calls from qt/paymentserver.cpp (Russell Yanofsky)
3ec2ebc Remove direct bitcoin calls from qt/addresstablemodel.cpp (Russell Yanofsky)
827de03 Remove direct bitcoin calls from qt/coincontroldialog.cpp (Russell Yanofsky)
a0704a8 Remove most direct bitcoin calls from qt/walletmodel.cpp (Russell Yanofsky)
90d4640 Remove direct bitcoin calls from qt/optionsdialog.cpp (Russell Yanofsky)
582daf6 Remove direct bitcoin calls from qt/rpcconsole.cpp (Russell Yanofsky)
3034a46 Remove direct bitcoin calls from qt/bantablemodel.cpp (Russell Yanofsky)
e0b66a3 Remove direct bitcoin calls from qt/peertablemodel.cpp (Russell Yanofsky)
d7c2c95 Remove direct bitcoin calls from qt/intro.cpp (Russell Yanofsky)
fe6f27e Remove direct bitcoin calls from qt/clientmodel.cpp (Russell Yanofsky)
5fba3af Remove direct bitcoin calls from qt/splashscreen.cpp (Russell Yanofsky)
c2f672f Remove direct bitcoin calls from qt/utilitydialog.cpp (Russell Yanofsky)
3d619e9 Remove direct bitcoin calls from qt/bitcoingui.cpp (Russell Yanofsky)
c0f2756 Remove direct bitcoin calls from qt/optionsmodel.cpp (Russell Yanofsky)
71e0d90 Remove direct bitcoin calls from qt/bitcoin.cpp (Russell Yanofsky)
ea73b84 Add src/interface/README.md (Russell Yanofsky)
Pull request description:
This is a refactoring PR that does not change behavior in any way. This change:
1. Creates abstract [`Node`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/node.h) and [`Wallet`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/wallet.h) interfaces in [`src/interface/`](https://github.com/ryanofsky/bitcoin/tree/pr/ipc-local/src/interface)
1. Updates Qt code to call the new interfaces. This largely consists of diffs of the form:
```diff
- InitLogging();
- InitParameterInteraction();
+ node.initLogging();
+ node.initParameterInteraction();
```
This change allows followup PR #10102 (makes `bitcoin-qt` control `bitcoind` over an IPC socket) to work without any significant updates to Qt code. Additionally:
* It provides a single place to describe the interface between GUI and daemon code.
* It can make better GUI testing possible, because Node and Wallet objects have virtual methods that can be overloaded for mocking.
* It can be used to help make the GUI more responsive (see https://github.com/bitcoin/bitcoin/issues/10504)
Other notes:
* I used python scripts [hide-globals.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/hide-globals.py) and [replace-syms.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/replace-syms.py) to identify all the places where Qt code was accessing libbitcoin global variables and calling functions accessing those global variables.
* These changes were originally part of #10102. Thanks to @JeremyRubin for the suggestion of splitting them out.
Commits:
- [`ea73b84d2d` Add src/interface/README.md](ea73b84d2d)
- [`71e0d90876` Remove direct bitcoin calls from qt/bitcoin.cpp](71e0d90876)
- [`c0f2756be5` Remove direct bitcoin calls from qt/optionsmodel.cpp](c0f2756be5)
- [`3d619e9d36` Remove direct bitcoin calls from qt/bitcoingui.cpp](3d619e9d36)
- [`c2f672fb19` Remove direct bitcoin calls from qt/utilitydialog.cpp](c2f672fb19)
- [`5fba3af21e` Remove direct bitcoin calls from qt/splashscreen.cpp](5fba3af21e)
- [`fe6f27e6ea` Remove direct bitcoin calls from qt/clientmodel.cpp](fe6f27e6ea)
- [`d7c2c95948` Remove direct bitcoin calls from qt/intro.cpp](d7c2c95948)
- [`e0b66a3b7c` Remove direct bitcoin calls from qt/peertablemodel.cpp](e0b66a3b7c)
- [`3034a462a5` Remove direct bitcoin calls from qt/bantablemodel.cpp](3034a462a5)
- [`582daf6d22` Remove direct bitcoin calls from qt/rpcconsole.cpp](582daf6d22)
- [`90d4640b7e` Remove direct bitcoin calls from qt/optionsdialog.cpp](90d4640b7e)
- [`a0704a8996` Remove most direct bitcoin calls from qt/walletmodel.cpp](a0704a8996)
- [`827de038ab` Remove direct bitcoin calls from qt/coincontroldialog.cpp](827de038ab)
- [`3ec2ebcd9b` Remove direct bitcoin calls from qt/addresstablemodel.cpp](3ec2ebcd9b)
- [`3cab2ce5f9` Remove direct bitcoin calls from qt/paymentserver.cpp](3cab2ce5f9)
- [`58845587e1` Remove direct bitcoin calls from qt transaction table files](58845587e1)
- [`e872c93ee8` Remove direct bitcoin access from qt/guiutil.cpp](e872c93ee8)
- [`56f33ca349` Remove direct bitcoin calls from qt/sendcoinsdialog.cpp](56f33ca349)
- [`9a61eed1fc` Use WalletBalances struct in Qt](9a61eed1fc)
- [`9960137697` Add developer notes about blocking GUI code](9960137697)
Tree-SHA512: 7b9eff2f37d4ea21972d7cc6a3dbe144248595d6c330524396d867f3cd2841d666cdc040fd3605af559dab51b075812402f61d628d16cf13719335c1d8bf8ed3
a5bca13 Bugfix: Include <memory> for std::unique_ptr (Luke Dashjr)
Pull request description:
Not sure why all these includes were missing, but it's breaking builds for some users:
https://bugs.gentoo.org/show_bug.cgi?id=652142
(Added to all files with a reference to `std::unique_ptr`)
Tree-SHA512: 8a2c67513ca07b9bb52c34e8a20b15e56f8af2530310d9ee9b0a69694dd05e02e7a3683f14101a2685d457672b56addec591a0bb83900a0eb8e2a43d43200509
c7ec524 [wallet] Add dummy wallet init class (John Newbery)
49baa4a [wallet] Use global g_wallet_init_interface to init/destroy the wallet. (John Newbery)
caaf972 [wallet] Create wallet init interface. (John Newbery)
5fb5421 [wallet] Move wallet init functions into WalletInit class. (John Newbery)
Pull request description:
This continues the work of #7965. This PR, along with several others, would remove the remaining dependencies from libbitcoin_server.a on libbitcoin_wallet.a.
To create the interface, I've just translated all the old init.cpp wallet function calls into an interface class. I've not done any thinking about whether it makes sense to change that interface by combining/splitting those calls. This is a purely internal interface, so there's no problem in changing it later.
Tree-SHA512: 32ea57615229c33fd1a7f2f29ebc11bf30337685f7211baffa899823ef74b65dcbf068289c557a161c5afffb51fdc38a2ee8180720371f64d433b12b0615cf3f
a192636 -blocksdir: keep blockindex leveldb database in datadir (Jonas Schnelli)
f38e4fd QA: Add -blocksdir test (Jonas Schnelli)
386a6b6 Allow to optional specify the directory for the blocks storage (Jonas Schnelli)
Pull request description:
Since the actual block files taking up more and more space, it may be desirable to have them stored in a different location then the data directory (use case: SSD for chainstate, etc., HD for blocks).
This PR adds a `-blocksdir` option that allows one to keep the blockfiles and the blockindex external from the data directory (instead of creating symlinks).
I fist had an option to keep the blockindex within the datadir, but seems to make no sense since accessing the index will (always) lead to access (r/w) the block files.
Tree-SHA512: f8b9e1a681679eac25076dc30e45e6e12d4b2d9ac4be907cbea928a75af081dbcb0f1dd3e97169ab975f73d0bd15824c00c2a34638f3b284b39017171fce2409
This commit creates a global g_wallet_init_interface, which is created
in bitcoind and bitcoin-qt. g_wallet_init_interface is used to init
and destroy the wallet.
This removes the dependency from init.cpp on the wallet library.
1f45e21 scripted-diff: Convert 11 enums into scoped enums (C++11) (practicalswift)
Pull request description:
Rationale (from Bjarne Stroustrup's ["C++11 FAQ"](http://www.stroustrup.com/C++11FAQ.html#enum)):
>
> The enum classes ("new enums", "strong enums") address three problems with traditional C++ enumerations:
>
> * conventional enums implicitly convert to int, causing errors when someone does not want an enumeration to act as an integer.
> * conventional enums export their enumerators to the surrounding scope, causing name clashes.
> * the underlying type of an enum cannot be specified, causing confusion, compatibility problems, and makes forward declaration impossible.
>
> The new enums are "enum class" because they combine aspects of traditional enumerations (names values) with aspects of classes (scoped members and absence of conversions).
Tree-SHA512: 9656e1cf4c3cabd4378c7a38d0c2eaf79e4a54d204a3c5762330840e55ee7e141e188a3efb2b4daf0ef3110bbaff80d8b9253abf2a9b015cdc4d60b49ac2b914
fc7c32fc6 do not truncate .dat extension for wallets in gui (Gregory Sanders)
Pull request description:
Truncating the extension results in wallet name ambiguity and the inability to use the wallet in GUI debug rpc console.
Resolves#12794
Tree-SHA512: 89507918f597e9274148b45233b893c9f653da4f9e929415822165d47c67b55ad0b2d5ff53b508e942831d5213d5c15bce3fbdfbcb592a5c7f3dd5c1ca02cfb8
342fb80 qt: Avoid resetting on resetguisettigs=0 (MarcoFalke)
Pull request description:
Shouldn't be affecting anyone, but might still be worth to fix at some point.
Tree-SHA512: af7fe67f1e8b3a0ff041258e3056d2e3e518258b015ee765f291e91fca86a7f7cd43c83844fd83f00a52dac2cf382db5d568aab91db636a031040551bd34172d
779c5f984 Qt: hide RPCConsole wallet selector when no wallets are present (Jonas Schnelli)
dc6f150f3 Qt: show wallet name in request dlg in case of multiwallet (Jonas Schnelli)
4826ca4b8 Qt: show wallet name in send confirmation dlg in case of multiwallet (Jonas Schnelli)
cfa4133ce GUI: RPCConsole: Log wallet changes (Luke Dashjr)
b6d04fc7c Qt: Get wallet name from WalletModel rather than passing it around (Luke Dashjr)
12d8d2681 Qt: When multiple wallets are used, include in notifications the name (Jonas Schnelli)
d1ec34a76 Qt: QComboBox::setVisible doesn't work in toolbars, so defer adding it at all until needed (Luke Dashjr)
d49cc70e6 Qt: Add wallet selector to debug console (Jonas Schnelli)
d558f44c5 Bugfix: RPC: Add missing UnregisterHTTPHandler for /wallet/ (Luke Dashjr)
85d531971 Qt: Ensure UI updates only come from the currently selected walletView (Luke Dashjr)
e449f9a9e Qt: Add a combobox to toolbar to select from multiple wallets (Luke Dashjr)
3dba3c3ac Qt: Load all wallets into WalletModels (Luke Dashjr)
Pull request description:
This is an overhaul of #11383 (plus some additions).
It avoids unnecessary coupling of httpserver/jsonrpc and the wallet as well as it avoids pointer pure passing (and pointer deletion) of `CWallet` (plus other minor design changes).
Additionally it adds the wallet name to the sendconfirmation and request dialog (in case multiwallet is active)
Tree-SHA512: 3d06e18badbc5d1821e488bf1dae463bb0be544cf11b2b618e025812bfdd13c5f39604bb93b4c705313930e7dc4e66f4848b9469ba14871bade58e7a027246a1
d2527bd Rename wallet_accounts.py test (Russell Yanofsky)
045eeb8 Rename account to label where appropriate (Russell Yanofsky)
Pull request description:
Rename account to label where appropriate
This change only updates strings and adds RPC aliases, but should simplify the implementation of address labels in https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the way and letting that change focus on semantics.
The difference between accounts and labels is that labels apply only to addresses, while accounts apply to both addresses and transactions (transactions have "from" and "to" accounts). The code associating accounts with transactions is clumsy and unreliable so we would like get rid of it.
---
There is a rebased version of #7729 atop this PR at https://github.com/ryanofsky/bitcoin/commits/pr/label, see https://github.com/bitcoin/bitcoin/pull/7729#issuecomment-338417139.
Tree-SHA512: b3f934e612922d6290f50137f8ba71ddfaea4485713c7d97e89400a8b73b09b254f9186dffa462c77f5847721f5af9852b5572ade5443d8ee95dd150b3edb7ff
b7fbcc5 Qt: Warn users about invalid-BIP21 URI bitcoin:// (Alexey Ivanov)
Pull request description:
This change affects only Qt5 users, since Qt4 QUrl don't forces lower case for urls. Also bitcoin-qt builds against Qt4 on linux.
PR for #11645
Tree-SHA512: 6b8cb18b29dbd2754e190a662ed67274a7f0decc6adb00b7e1af107d5f8ea2845b668cf28d6ccf2f1d15e8ef212f5a76910810634a4c15e7fabd1dd2072e7232
4d9b4256d8 Fix typos (Dimitris Apostolou)
Pull request description:
Unfortunately I messed up my repo while trying to squash #12593 so I created a PR with just the correct fixes.
Tree-SHA512: 295d77b51bd2a9381f1802c263de7ffb2edd670d9647391e32f9a414705b3c8b483bb0e469a9b85ab6a70919ea13397fa8dfda2aea7a398b64b187f178fe6a06
d843db7 Qt: remove "new" button during receive-mode in addressbook (Jonas Schnelli)
Pull request description:
There are currently two ways how to generate new receiving addresses in the GUI (which leads to code duplication or required refactoring, see #12520).
Since the address-book is probably something that should be removed in the long run, suppressing the new-button in receive-mode could be a first step in deprecating the address book.
With this PR, users can still edit existing receiving address book entries and they can still create new sending address book entries.
Tree-SHA512: abe8d1b44bc3e1b53826ccf9d2b3f764264337758d95ca1fe1ef1bac72d47608cf454055fce3720e06634f0a5841a752ce643b4505b47d6e322b6fc71296e961
This change only updates strings and adds RPC aliases, but should simplify the
implementation of address labels in
https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the
way and letting it focus on semantics.
The difference between accounts and labels is that labels apply only to
addresses, while accounts apply to both addresses and transactions
(transactions have "from" and "to" accounts). The code associating accounts
with transactions is clumsy and unreliable so we would like get rid of it.
1ee72a819f qt: Avoid querying unnecessary model data when filtering transactions (João Barbosa)
Pull request description:
This change moves down model data querying to where it's needed. The worst case remains the same (all data is queried and the row passes) but for the average case it improves the filter performance.
Tree-SHA512: 3bcaced029cb39dfbc5377246ce76634f9050ee3a3053db4d358fcbf4d8107c649e75841f21d69f1aebcaf1bbffe3eac784e6b03b366fdbbfec1e0da8f78d8ef
b4bc32a451 [wallet] Get rid of CWalletTx default constructor (Russell Yanofsky)
a128bdc9e1 [wallet] Construct CWalletTx objects in CommitTransaction (Russell Yanofsky)
Pull request description:
Two commits:
- `Construct CWalletTx objects in CommitTransaction` moves a bunch of CWalletTx initialization into CWallet::CommitTransaction to dedup some code and avoid future inconsistencies in how wallet transactions are created.
- `Get rid of CWalletTx default constructor` does what is described and eliminates the possibility of empty transaction entries being inadvertently created by mapWallet[hash] accesses.
Both of these changes were originally part of #9381
Tree-SHA512: af3841c4f0539e0662d81b33c5369fc70aa06ddde1c59cb00fb21c9e4c7d9ff47f1edc5040cb463af1333838802c56b3ef875b939e2b804ee45b8e0294a4371c
92fabcd44 Add LookupBlockIndex function (João Barbosa)
43a32b739 Add missing cs_lock in CreateWalletFromFile (João Barbosa)
f814a3e8f Fix cs_main lock in LoadExternalBlockFile (João Barbosa)
c651df8b3 Lock cs_main while loading block index in AppInitMain (João Barbosa)
02de6a6bc Assert cs_main is held when accessing mapBlockIndex (João Barbosa)
Pull request description:
Replace all `mapBlockIndex` lookups with the new `LookupBlockIndex()`. In some cases it avoids a second lookup.
Tree-SHA512: ca31118f028a19721f2191d86f2dd398144d04df345694575a64aeb293be2f85785201480c3c578a0ec99690516205708558c0fd4168b09313378fd4e60a8412
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
Construct CWalletTx objects in CWallet::CommitTransaction, instead of having
callers do it. This ensures CWalletTx objects are constructed in a uniform way
and all fields are set.
This also makes it possible to avoid confusing and wasteful CWalletTx copies in
https://github.com/bitcoin/bitcoin/pull/9381
There is no change in behavior.
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
3b26b6af7 qt: Remove TransactionTableModel::TxIDRole (João Barbosa)
Pull request description:
The role `TxIDRole` is a duplicate of `TxHashRole`. This change favours `TxHashRole`.
Tree-SHA512: ad35933eae1cb6b242b25b8940d662c2c79c766732d76fdd410c80230ec084969294a8e5a126794707992a566076ef4452b592050f7af6c4fa7742891090803d
92f1f8b31 Split off key_io_tests from base58_tests (Pieter Wuille)
119b0f85e Split key_io (address/key encodings) off from base58 (Pieter Wuille)
ebfe217b1 Stop using CBase58Data for ext keys (Pieter Wuille)
32e69fa0d Replace CBitcoinSecret with {Encode,Decode}Secret (Pieter Wuille)
Pull request description:
This PR contains some of the changes left as TODO in #11167 (and built on top of that PR). They are not intended for backporting.
This removes the `CBase58`, `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey` classes, in favor of simple `Encode`/`Decode` functions. Furthermore, all Bitcoin-specific logic (addresses, WIF, BIP32) is moved to `key_io.{h,cpp}`, leaving `base58.{h,cpp}` as a pure utility that implements the base58 encoding/decoding logic.
Tree-SHA512: a5962c0ed27ad53cbe00f22af432cf11aa530e3efc9798e25c004bc9ed1b5673db5df3956e398ee2c085e3a136ac8da69fe7a7d97a05fb2eb3be0b60d0479655
f506c0a7f [qt] send: Clear All also resets coin control options (Sjors Provoost)
Pull request description:
This change makes it so that a custom change address and manual input selection are removed if the user clicks Clear All in the send screen.
Tree-SHA512: 78746043a74c9c26ef476eb0df7ce95411683749d9f6b2747222eaac751e241ea7d4d7ce9e4e69ed0b19fa76754d8584e5bef5bba1ad6598f8e39c784b4264d2
6fbc0986f gui: Show messages as text not html (Wladimir J. van der Laan)
Pull request description:
Currently, error messages (such as InitError) are displayed as-is, which means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line though e.g. specifying a wallet name with HTML in it. This isn't a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received from the network this way). However, it can be confusing.
So explicitly force the format as text.
Tree-SHA512: 96c9196f20552544b862071bca61817ef03653019cc3548023d435f3a9c48b6cd501fab3246783cb0be68c8c7bb1b865913d92070a7c4e84e82c6577709f0934
Currently, error messages (such as InitError) are displayed as-is, which
means Qt does auto detection on the format.
This means that it's possible to inject HTML from the command line
though e.g. specifying a wallet name with HTML in it. This isn't
a direct security risk because fetching content from internet is
disabled (and as far as I know we never report strings received
from the network this way). However, it can be confusing.
So explicitly force the format as text.
0bc095efd [qt] Improved "custom fee" explanation in tooltip (Randolf Richardson)
Pull request description:
Thanks to @dooglus for asking about this tooltip in Issue 12500.
Reference: https://www.github.com/bitcoin/bitcoin/issues/12500
I would also appreciate it if someone can confirm that 1 kilobyte in this field indeed represents 1,000 bytes rather than 1,024 bytes (if it's supposed to be 1,024, then I'll gladly make the necessary changes to reflect this).
Tree-SHA512: da2fe0128411b5ef6f0a26382a80601efcf823c3f3591bdd83a7fe7e25777728e7eb89e2e8b175b991566e63838aca12d204792f981031b86e7b2ba28ca50021
ee041196fc Show a transaction's virtual size in its details dialog. (Chris Moore)
Pull request description:
#12501 looks like it is going to mention transaction's "virtual size" in the custom fee tooltip, so let's display the virtual size when the user double-clicks a transaction.
Tree-SHA512: c60ae23c9f86edfba086b840519941d8e8ee1be9da5987ffe6dee3255943ea5d215708ce57464f109a1d1c612c4c0eeb11f8f3e203d8a8cfc1f8ec753a8aac27
Remove requirement that two wallet files can only be opened at the same time if
they are contained in the same directory.
This change mostly consists of updates to function signatures (updating
functions to take fs::path arguments, instead of combinations of strings,
fs::path, and CDBEnv / CWalletDBWrapper arguments).
New global variables were introduced in #11882 and not setting them causes:
wallet/test/wallet_tests.cpp(638): error in "ListCoins": check wallet->CreateTransaction({recipient}, wtx, reservekey, fee, changePos, error, dummy) failed
wallet/test/wallet_tests.cpp(679): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(686): error in "ListCoins": check available.size() == 2 failed [1 != 2]
wallet/test/wallet_tests.cpp(705): error in "ListCoins": check list.begin()->second.size() == 2 failed [1 != 2]
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
3f592b8 [QA] add wallet-rbf test (Jonas Schnelli)
8222e05 Disable wallet fallbackfee by default on mainnet (Jonas Schnelli)
Pull request description:
Removes the default fallback fee on mainnet (but keeps it on testnet/regtest).
Transactions using the fallbackfee in case the fallback fee has not been set are getting rejected.
Tree-SHA512: e54d2594b7f954e640cc513a18b0bfbe189f15e15bdeed4fe02b7677f939bca1731fef781b073127ffd4ce08a595fb118259b8826cdaa077ff7d5ae9495810db
e7d9fc5 [qt] navigate to transaction history page after send (Sjors Provoost)
Pull request description:
Before this change QT just remained on the Send tab, which I found confusing. Now it switches to the Transactions tab. This makes it more clear to the user that the send actually succeeded, and here they can monitor progress.
Ideally I would like to highlight the transaction, e.g. by refactoring `TransactionView::focusTransaction(const QModelIndex &idx)` to accept a transaction hash, but I'm not sure how to do that.
Tree-SHA512: 8aa93e03874de8434e18951f8aec47377814c0bcaf7eda4766fc41d5a4e32806346e12e4139e4d45468dfdf0b786f5a7faa393a31b8cd6c65ccac21fb3782c33
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
a6e6e39a8b Bugfix: respect user defined configuration file (-conf) when open conf. file from QT settings (Jonas Schnelli)
Pull request description:
Fixes#12488.
In master, opening the configuration file from the GUI settings will always open the file "bitcoin.conf" regardless of the `-conf=` settings.
This PR makes the GUI settings open configuration file function respect the `-conf` option.
Tree-SHA512: fb54cc699b4d2a3947f749fdf5f1a51251ffd67d0f6c6a937a5b80f0ba5a5c1085d0eef190453bbc04696d4d76c2c266de0fe9712e65e4bb36116158b54263d4
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
fa27623 qt: Initialize members in WalletModel (MarcoFalke)
Pull request description:
This prevents segfaults (or errors when running qt in valgrind)
```
Conditional jump or move depends on uninitialised value(s)
WalletModel::checkBalanceChanged() (walletmodel.cpp:156)
Tree-SHA512: 38c8c03c7fa947edb3f1c13eab2ac7a62ef8f8141603c2329a7dc5821a887a349af8014dc739b762e046f410f44a9c6653b6930f08b53496cf66381cadc06246
d6f3a73 Remove redundant locks (practicalswift)
Pull request description:
Remove redundant locks:
* ~~`FindNode(...)` is locking `cs_vNodes` internally~~
* `SetAddressBook(...)` is locking `cs_wallet` internally
* `DelAddressBook(...)` is locking `cs_wallet` internally
**Note to reviewers:** From what I can tell these locks are redundantly held from a data integrity perspective (guarding specific variables), and they do not appear to be needed from a data consistency perspective (ensuring a consistent state at the right points). Review thoroughly and please let me know if I'm mistaken :-)
Tree-SHA512: 7e3ca2d52fecb16385dc65051b5b20d81b502c0025d70b0c489eb3881866bdd57947a9c96931f7b213f5a8a76b6d2c7b084dff0ef2028a1e9ca9ccfd83e5b91e
004f999 boost: drop boost threads for [alert|block|wallet]notify (Cory Fields)
0827267 boost: drop boost threads from torcontrol (Cory Fields)
ba91724 boost: remove useless threadGroup parameter from Discover (Cory Fields)
f26866b boost: drop boost threads for upnp (Cory Fields)
Pull request description:
This doesn't completely get rid of boost::thread, but this batch should be easy to review, and leaves us with only threadGroup (scheduler + scriptcheck) remaining.
Note to reviewers: The upnp diff changes a bunch of whitespace, it's much more clear with 'git diff -w'
Tree-SHA512: 5a356798d0785f93ed143d1f0afafe890bc82f0d470bc969473da2d2aa78bcb9b096f7ba11b92564d546fb447d4bd0d347e7842994ea0170aafd53fda7e0a66e
c8edc2c [docs] initial QT documentation, move Qt Creator instructions (Sjors Provoost)
Pull request description:
I'll update this as I figure out how everything is tied together, but I think it's a useful enough start.
Tree-SHA512: d96e5c9ba8ccc3a1b92a0894a8a8449317100eebb14e5d390b51793534458f50eac296cf2945fccf81b85aff23fa32d91d6015a0a76ada4f7091a400d7508ae5
1e5d14b qt: Clarify some comments (Wladimir J. van der Laan)
f5a4c3d qt: Make sure splash screen is freed on AppInitMain fail (Wladimir J. van der Laan)
Pull request description:
The `splashFinished` event was never sent if AppInitMain fails, causing the splash screen to stick around, causing problems later.
This bug has existed for a while but is now trigging potential crashed because the splash screen subscribes to wallet events.
Meant to fix#12372.
Tree-SHA512: 192a7e3a528015e771d7860dd95fd7b772292fd8064abf2a3cf3a8ea0d375cd43a6e8ed37ca1a38962fe1410c934599e557adf6a8ef9d87ec7f61b6e5fd8db7e
2222bf0 qt: Poll ShutdownTimer after init is done (MarcoFalke)
Pull request description:
The shutdown process has started in `requestShutdown`, but initialize will happily continue with `initializeResult` and start threads late in the shutdown progess. Deleting this running thread will crash the application according to the qt docs:
e5033a5c9b/src/corelib/thread/qthread.cpp (L412-L415)
Potential fix for https://github.com/bitcoin/bitcoin/issues/12372#issuecomment-363642332
This reverts #11831 for now and hopefully restores the previous behaviour.
Tree-SHA512: 8e1706afe90ddf2d972aca12c12d4cb2a9a4f38646c59c5466fe5a1a67361896b93c43917d5ac283841ee2bcc62e6bb8dc2bc81dea9129c899b354e9a4ef241b
9ad6746ccd Use static_cast instead of C-style casts for non-fundamental types (practicalswift)
Pull request description:
A C-style cast is equivalent to try casting in the following order:
1. `const_cast(...)`
2. `static_cast(...)`
3. `const_cast(static_cast(...))`
4. `reinterpret_cast(...)`
5. `const_cast(reinterpret_cast(...))`
By using `static_cast<T>(...)` explicitly we avoid the possibility of an unintentional and dangerous `reinterpret_cast`. Furthermore `static_cast<T>(...)` allows for easier grepping of casts.
For a more thorough discussion, see ["ES.49: If you must use a cast, use a named cast"](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#es49-if-you-must-use-a-cast-use-a-named-cast) in the C++ Core Guidelines (Stroustrup & Sutter).
Tree-SHA512: bd6349b7ea157da93a47b8cf238932af5dff84731374ccfd69b9f732fabdad1f9b1cdfca67497040f14eaa85346391404f4c0495e22c467f26ca883cd2de4d3c
The `splashFinished` event was never sent if AppInitMain fails,
causing the splash screen to stick around, causing problems
later.
This bug has existed for a while but is now trigging potential crashed
because the splash screen subscribes to wallet events.
Meant to fix#12372.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
d3e467520f Properly alphabetize output of CLI --help option. (murrayn)
Pull request description:
The --help output of bitcoind, bitcoin-cli, bitcoin-tx, qt/bitcoin-qt, et al. is only about 90% alphabetized by option, which is kind of sloppy and occasionally misleading. This change (mostly) organizes the output alphabetically.
Tree-SHA512: 3029900dbe99f03397c1cbdb5e4ac09a13bc99bafe73c6855097206e4cdd9ad70d0b5cedb5e1e520005c3e9ef1c4cd32bb9d8c98ce6918d8434fec8bf06e56c8
Pull 0.16 translations before forking, to avoid having to do it twice.
Tree-SHA512: 9c093885f03783e0f64718985c5f9d385d2a8592e2acc87d922ca973d07c756a6b7fff585388094f0e1b673c41e792ce918c1f594b45e82a262acd93e1b91a8e
This resolves#12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
ba490d2460 qt: Bump BLOCK_CHAIN_SIZE to 200GB (Wladimir J. van der Laan)
Pull request description:
Part of the release process for 0.16.
Value is open for discussion, my blocks/ directory is 163GB but this leaves some slack.
Tree-SHA512: 4dff81740992bf9de90427934afeb223ea5216f5682c9f07cb5c47aea33980a4c682fe3fd43c3dfa2c4d66ad0e7434dbce6cb252e56d63b36df605e12af9b10a
596c446 [wallet] use P2WPKH change output if any destination is P2WPKH or P2WSH (Sjors Provoost)
Pull request description:
If `-changetype` is not explicitly set, then regardless of `-addresstype`, the wallet will use a ~`bech32` change address~ `P2WPKH` change output if any destination is `P2WPKH` or `P2WSH`.
This seems more intuitive to me and more in line with the spirit of [BIP-69](https://github.com/bitcoin/bips/blob/master/bip-0069.mediawiki).
When combined with #11991 a QT user could opt to use `bech32` exclusively without having to figure out how to launch with `-changetype=bech32`, although so would #11937.
Tree-SHA512: 9238d3ccd1f3be8dfdd43444ccf45d6bdc6584ced3172a3045f3ecfec4a7cc8999db0cdb76ae49236492a84e6dbf3a1fdf18544d3eaf6d518e1f8bd241db33e7
7f81250 Mention that other RPC calls report keys as "imported" while txns are still missing (Jonas Schnelli)
ccd8ef6 Reduce cs_main lock in ReadBlockFromDisk, only read GetBlockPos under the lock (Jonas Schnelli)
bc356b4 Make sure WalletRescanReserver has successfully reserved the rescan (Jonas Schnelli)
dbf8556 Add RAII wallet rescan reserver (Jonas Schnelli)
8d0b610 Avoid pemanent cs_main/cs_wallet lock during wallet rescans (Jonas Schnelli)
Pull request description:
Right now, we are holding `cs_main`/`cs_wallet` during the whole rescan process (which can take a couple of hours).
This was probably only done because of laziness and it is an important show-stopper for #11200 (GUI rescan abort).
Tree-SHA512: 0fc3f82d0ee9b2f013e6bacba8d59f7334306660cd676cd64c47bb305c4cb7c7a36219d6a6f76023b74e5fe87f3ab9fc7fd2439e939f71aef653fddb0a1e23b1
63ac8907c [qt] receive tab: bech32 address opt-in checkbox (Sjors Provoost)
Pull request description:
<img width="647" alt="schermafbeelding 2018-01-12 om 18 34 48" src="https://user-images.githubusercontent.com/10217/34887691-a6a796fe-f7c7-11e7-8b89-87ce07c61ce3.png">
Checkbox does what you would expect. Press tab from the amount field to get there.
It's unchecked by default.
When launched with `-addresstype=bech32` it's checked by default. When launched with `-addresstype=legacy` it unchecked and disabled.
The change in `receivecoinsdialog.ui` is smaller than it looks, due to the way git handles XML diffs. I had to add a horizontal spacer to make it look decent, see https://github.com/bitcoin/bitcoin/issues/11950#issuecomment-352870909. This causes column numbers to change in the rest of the grid.
I recommend testing on at least one other OS than OSX to be on the safe side.
Tree-SHA512: ec4b733b796d9a94278a5d8040a69d9574ef50021e68f94f61f2da75d1bb57f39272cbc9f1f7d34f733a19640daf666a23844fcd132f83bfdaf327d9d1d6f105
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
6dda059bd [qt] Simplifies boolean expression model && model->haveWatchOnly() (251)
Pull request description:
This PR optimizes the boolean expression `model && model->haveWatchOnly()` to `model->haveWatchOnly()`.
The boolean expression can be optimized because the method `TransactionView::exportClicked` already guards against a potential dereferenced null pointer by returning early if `model` is null.
63a4dc1087/src/qt/transactionview.cpp (L351-L353)
Tree-SHA512: 8bdd0d05bf879745fa39d3ca7524471720ae08ceee9427d5a08776e7b56d18542ae87a6991cd6779e232305f504fdfc77223702b72ecbe231f5f5e98453456dd
The boolean expression model && model->haveWatchOnly() can be simplified to model->haveWatchOnly(), because if (!model || !model->getOptionsModel()) { return; } guards against a potential dereferenced null pointer.
* Now that we have bip176, change "µBTC" to the more colloquial "bits"
* We retain the `µBTC (bits)` description in dropdowns and status bars.
The more concise "bits" is used when appended to numbers.
Signed-off-by: William Casarin <jb55@jb55.com>
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
c3055bb Add help-console command to Qt debug console (Luke Mlsna)
Pull request description:
This PR would close issue #9195 by adding documentation for the debug console features (mainly nested commands) which were added in [PR #7783](https://github.com/bitcoin/bitcoin/pull/7783).
The following changes were made to QT debug console code:
- Added a line to the initial message text at the top of the debug console:
> For more information on using this console type **help-console**.
- Added a pseudo-command `help-console` which is hooked after parsing the request, but before actually executing the RPC thread. It prints the following text to the console as if it were a valid RPC response.
> This console accepts RPC commands using the standard syntax.
> example: getblockhash 8
> This console can also accept RPC commands using bracketed syntax.
> example: getblockhash(8)
> A space or a comma can be used to separate arguments for either syntax.
> example: sendtoaddress \<address\> \<amount\>
> sendtoaddress,\<address\>,\<amount\>
> Commands may be nested when specified with the bracketed syntax.
> example: getblockinfo(getblockhash(0),true).
> Result values can be queried with a non-quoted string in brackets.
> example: getblock(getblockhash(0) true)[height]
This seemed like a reasonably sane way to introduce a fake RPC help command, but
Tree-SHA512: 35d73dcef9c4936b8be99e80978169f117c22b94f4400c91097bf7e0e1489060202dcd738d9debdf4c8a7bd10709e2c19d4f625f19e47c4a034f1d6019c0e0f2
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
Opt-in RBF checkbox uses less technical jargon and emphasises
the fee bump functionality (at the expense of not mentioning
other uses of RBF).
The transaction confirmation screen uses copy consistent with this.
- Added `help-console` to the list of autocompletion strings
- Implemented requested changes to help message:
- Added an example that uses access-by-index `getblock(getblockhash(0) true)[tx][0]`
- Replace "bracketed syntax" to "parenthesized syntax" where applicable
- Replace "separate" with "delimit"
- Removed `<br>` and `<b>help/help-console</b>` from translation strings, since these parts don't change between languages
- Changed examples to be based off `getblock 0` so they will work even with pruned/no blockchain and `disablewallet` if copied and pasted
- Clarified syntax for queries of named/unnamed result objects.
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
aed1d90ac [wallet] Change feebumper from class to functions (Russell Yanofsky)
37bdcca3c [refactor] Make feebumper namespace (Russell Yanofsky)
7c4f00919 [trivial] Rename feebumper variables according to project code style (Russell Yanofsky)
Pull request description:
Make feebumper methods static and remove stored state in the class.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper methods static, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
- Rename CFeeBumper class to FeeBumper (every CFeeBumper reference had to be
updated in this PR anyway so this doesn't increase the size of the diff)
This change was originally part of https://github.com/bitcoin/bitcoin/pull/10244
Tree-SHA512: bf75e0c741b4e9c8912e66cc1dedf0ff715f77ea65fc33f7020d97d9099b0f6448f5852236dac63eea649de7d6fc03b0b21492e2c5140fb7560a39cf085506fd
927f4ff5a GUI: Receive: Remove option to reuse a previous address (Luke Dashjr)
Pull request description:
This was justified by the need to "resent" an invoice, but now that we have the request history, that need should be gone.
Tree-SHA512: 4ade4eb84a21bbbd8dcc3a2c9580d416e113284b5bdf350c22051c233101fe0ee31659c54a7a46e7136f9c999acb61efbbb3f97aeb2fa7b2b1e1daec02ca0837
Change feebumper from a stateful class into a namespace of stateless
functions.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper stateless, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
Future commit will remove the FeeBumper class. This commit simply places
everything into a feebumper namespace, and changes the enum class name
from BumpeFeeResult to feebumper::Result.
Future PRs will completely refactor this translation unit and touch all
this code so we rename the variables to follow project stlye guidelines
in this preparation commit.
Don't use m_ prefixes for member variables since we're going to remove
the class entirely in the next commits.
d052e3847 [qt] Add use available balance in send coins dialog (CryptAxe)
Pull request description:
This is an alternative to #11098 to handle #11033 where a new button `Use available balance` is added to each entry. When activated, the available balance is calculated by using the coin control (if any) and then it's subtracted the remaining recipient amounts. If this amount is positive then the `Subtract fee from amount` is automatically selected.
Comparing to #11098, this has the advantage to avoid the fair amount division over the recipients and allows to fine adjust the amounts in multiple iterations.
Started from @CryptAxe commit 89e9eda to credit some code.
<img width="965" alt="screen shot 2017-09-13 at 01 32 44" src="https://user-images.githubusercontent.com/3534524/30354518-e1bee31c-9824-11e7-9354-300aa63cdfd0.png">
<img width="964" alt="screen shot 2017-09-13 at 01 44 57" src="https://user-images.githubusercontent.com/3534524/30354598-5731ac9c-9825-11e7-9d5f-8781988ed219.png">
Tree-SHA512: 01d20c13fd8b6c2a0ca1d74d3a9027c6922e6dccd3b08e59d5a72636be7072ed5eca7ebc5d431299497dd3374e83753220ad4174d8bc46dadb4b2f54973036a5
a357293 Use MakeUnique<Db>(...) (practicalswift)
3e09b39 Use MakeUnique<T>(...) instead of std::unique_ptr<T>(new T(...)) (practicalswift)
8617989 Add MakeUnique (substitute for C++14 std::make_unique) (practicalswift)
d223bc9 Use unique_ptr for pcoinscatcher/pcoinsdbview/pcoinsTip/pblocktree (practicalswift)
b45c597 Use unique_ptr for pdbCopy (Db) and fix potential memory leak (practicalswift)
29ab96d Use unique_ptr for dbenv (DbEnv) (practicalswift)
f72cbf9 Use unique_ptr for pfilter (CBloomFilter) (practicalswift)
8ccf1bb Use unique_ptr for sem{Addnode,Outbound} (CSemaphore) (practicalswift)
73db063 Use unique_ptr for upnp_thread (boost::thread) (practicalswift)
0024531 Use unique_ptr for dbw (CDBWrapper) (practicalswift)
fa6d122 Use unique_ptr:s for {fee,short,long}Stats (TxConfirmStats) (practicalswift)
5a6f768 Use unique_ptr for httpRPCTimerInterface (HTTPRPCTimerInterface) (practicalswift)
860e912 Use unique_ptr for pwalletMain (CWallet) (practicalswift)
Pull request description:
Use `std::unique_ptr` (C++11) where possible.
Rationale:
1. Avoid resource leaks (specifically: forgetting to `delete` an object created using `new`)
2. Avoid undefined behaviour (specifically: double `delete`:s)
**Note to reviewers:** Please let me know if I've missed any obvious `std::unique_ptr` candidates. Hopefully this PR should cover all the trivial cases.
Tree-SHA512: 9fbeb47b800ab8ff4e0be9f2a22ab63c23d5c613a0c6716d9183db8d22ddbbce592fb8384a8b7874bf7375c8161efb13ca2197ad6f24b75967148037f0f7b20c
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
b109a1c Remove redundant nullptr checks before deallocation (practicalswift)
Pull request description:
Rationale:
* `delete ptr` is a no-op if `ptr` is `nullptr`
Tree-SHA512: c98ce769125c4912186a8403cc08a59cfba85b7141af645c709b4c4eb90dd9cbdd6ed8076d50099d1e4ec2bf75917d1af6844082ec42bbb4d94d229a710e051c
ff35de8 [ui] Add toggle for unblinding password fields (Thomas Snider)
Pull request description:
Proposed change for adding the ability to toggle password visibility in the password dialog. This is similar to functionality in most password managers and is specifically added with the use case of password managers in mind - the password in that case is likely pasted twice into both the new password and confirm password fields.
If this is a welcome change, I am open to suggestions on rearranging the layout.
Tree-SHA512: 1823f356f8f941cc584c44de264433e9a573cb8a358efa300a412c4458b5564d8d193969be40859195cf9c8d6768eee895ee22440d51db4f09175f9b4e28bced
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
This eases the during-type validation to allow Bech32 chars.
Once the focus has been lost, the address will be properly verified through IsValidDestinationString
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
