341f7c7b0e macOS fix: Check for correct version of flake8 to avoid spurious warnings. The brew installed flake8 version is Python 2 based and does not work. (practicalswift)
908a559f33 macOS fix: Add excludes for checks added in the newer shellcheck version installed by brew (practicalswift)
ec4d57bbb3 macOS fix: Work around empty (sub)expression error when using BSD grep (practicalswift)
b57d7d92fe macOS fix: Avoid mapfile due to ancient version of bash shipped with macOS (practicalswift)
Pull request description:
The linters are thoroughly tested under Ubuntu which is what we use in Travis. When reading #14041 I understood that some developers were experiencing problems when running the linters on their local machines.
Assuming these local machines were running macOS I installed a fresh macOS VM, followed the instructions in `build-osx.md` and ran the linters.
This PR contains the changes needed to make `lint-all.sh` run as expected.
Ideally the linters would continuously run also under a Travis macOS environment to make sure we catch these kind of issues before merge.
Tree-SHA512: b39c9a970d14d27db1fb592539923c0bc676b5217f415d02fda3f17bf54d46faa172376e8a3ecab07ca68a3acba9aebe00b2b1b2161b2a36b85fbb672e7efb5c
5d62dcf9cf lint: Make sure we read the command line inputs using utf-8 decoding in python (Chun Kuan Lee)
Pull request description:
Make sure we read the command line inputs using utf-8 decoding in python
occurred from travis cron job:
contrib/verify-commits/verify-commits.py should run with utf-8, otherwise it would raise UnicodeDecodeError
`UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 744: ordinal not in range(128)`
Tree-SHA512: 90e4ad57fdbbbecb0a21fc2d2b03a04f5ef125e54124719ef36e5a85326930b732b47534757a7c3a8730096f3947b009ec898191928b5c2d38f9f4b3e37db48d
ca1a093127 Add regression test: Don't assert(...) with side effects (practicalswift)
4c3c9c3869 Don't assert(...) with side effects (practicalswift)
Pull request description:
Don't `assert(...)` with side effects.
From the developer notes:
> **Assertions should not have side-effects**
>
> Rationale: Even though the source code is set to refuse to compile with assertions disabled, having side-effects in assertions is unexpected and makes the code harder to understand
These assertions were introduced quite recently (in #14069 which was merged two days ago) and since this is a recurring thing (see #13534 – "Don't assert(foo()) where foo() has side effects" from May) I added a simple regression test for the most obvious common side effect.
Tree-SHA512: be65db9d8d5d0f5752152ba73fe3fbb0531880f156d3cd7dfdf1752709979b63214e46ae64b1adbe1e09fa121278f4087f4ae49bff16cf8f5aec16ea6bde3650
6af6d9b23d test: Add tests for RPC help (João Barbosa)
Pull request description:
At the moment the new test checks for:
- invalid usages
- expected output for unknown command
- current RPC command titles (derived from command categories) — this prevents adding wrong RPC categories and new categories must be added to the test
Tree-SHA512: f987535d001b1cd300656588602b1634099ea68a1dd2282180c30fa56caf7f990be9e2dc86c7431dfcf7fd686d0299a8d4935df178a2c9f0fb6fbebcba748eb5
b193d5a443 Removes the Boost case_conv.hpp dependency. (251)
7a208d9fad Implements custom tolower and toupper functions. (251)
e2ba043b8d Implements ParseNetwork unit test. (251)
Pull request description:
This pull request removes the `boost/algorithm/string/case_conv.hpp` dependency from the project.
`boost/algorithm/string/case_conv.hpp` is included for the `boost::to_lower` and `boost::to_upper` template functions.
We can replace the calls to these functions with straightforward alternative implementations that use the C++ Standard Library, because the functions are called with `std::string` objects that use standard 7-bit ASCII characters as argument.
The refactored implementation should work without the explicit `static_cast<unsigned char>` cast and `unsigned char` lambda return type. Both have been added defensively and to be explicit. Especially in case of the former, behaviour is undefined (potentially result in a crash) if the `std::toupper` argument is not an `unsigned char`.
A potential alternative, maybe even preferred, implementation to address the `boost::to_lower` function call in `ParseNetwork(std::string)` could have been:
```c++
if (net == "ipv4" || net == "IPv4") return NET_IPV4;
if (net == "ipv6" || net == "IPv6") return NET_IPV6;
```
This alternative implementation would however change the external behaviour of `ParseNetwork(std::string)`.
This pull requests includes a unit test to validate the implementation of `ParseNetwork(std::string)` prior and after the removal of the `case_conv.hpp` dependency.
`boost/algorithm/string/case_conv.hpp` has been removed from the `EXPECTED_BOOST_INCLUDES` in `test/lint/lint-includes.sh` because it is no longer required.
Tree-SHA512: d803ae709f2368a3efb223097384a722436955bce0c44a1a5cffd0abb3164be0cce85ba0e9ebd9408166df3f1a95ea0c0d29e3a2534af2fae206c0419d67fde9
1661a472b8 add unicode compatible file_lock for Windows (Chun Kuan Lee)
Pull request description:
boost::interprocess::file_lock cannot open the files that contain characters which cannot be parsed by the user's code page on Windows.
This PR is seperated from #13426 for easier review.
Tree-SHA512: e240479cda65958bf6e1319840b83928b2b50da81d99f4f002fb3b62621370bcd4bcfacd2b8c0678c443a650d6ba53d9d12618b591e5bfd67ac14388a18fd822
fae040010d qa: Add some actual witness in rpc_rawtransaction (MarcoFalke)
Pull request description:
The transaction was serialized with the witness flag but didn't include any witness, so add some dummy witness...
Tree-SHA512: fe71167c16e9b0053110be7c544e1ea08868f04ffee8d4c74887c9bcdcd5b59d5e8dd53c67e104a1bdbbf606202bc3fbef6017f402f2c75bdb2ebd9f7aabb2b1
This commit removes the `boost/algorithm/string/case_conv.hpp` dependency from the project. It replaces the `boost::to_lower` and `boost::to_upper` functions with custom functions that are locale independent and ASCII deterministic.
16e288acdd test padding non micro timestamps (John Newbery)
995dd89d88 [Tests] Make combine_logs.py handle multi-line logs (John Newbery)
Pull request description:
combine_logs.py currently inserts additional newlines into multi-line
log messages, and doesn't color them properly. Fix both of those.
Tree-SHA512: dbe2f3ecc7cfbc95ee4350e648d127538c79cb6555257d4aeec12fe3d159366742b68e90e620c8ed7219a44b973395c7e5929ba374fae115fbee25560db645f6
boost::interprocess::file_lock cannot open the files that contain characters which cannot be parsed by the user's code page on Windows.
This commit add a new class to handle those specific file for Windows.
bb08423d5c [doc] Add release notes for 'account' API removal (John Newbery)
1f4b865e57 [wallet] Re-sort wallet RPC commands (John Newbery)
f0dc850bf6 [wallet] Remove wallet account RPCs (John Newbery)
c410f41575 [tests] Remove wallet accounts test (John Newbery)
Pull request description:
This is the first part of #13825. It simply removes the RPC methods and tests.
#13825 touches lots of files and will require frequent rebasing.
Breaking it down for easier reviewing and fewer rebases.
Tree-SHA512: d29af8e7a035e4484e6b9bb56cb86592be0ec112d8ba4ce19c15d15366ff3086e89e99fca26b90c9d66f6d3e06894486d0f29948df0bb7dcb1e2c49c6887a85a
414326952c use export LC_ALL=C.UTF-8 (Julian Fleischer)
728c82d029 make script exit if a command fails (Julian Fleischer)
506890b24d move remaining travis build steps into individual files (Julian Fleischer)
272306ea57 number .travis/ script according to build lifecycle and add README to explain (Julian Fleischer)
519e2739cf move lint stage up to resemble travis build ui (Julian Fleischer)
86d34f0e65 abort script in END_FOLD on non-zero exit code (Julian Fleischer)
4f2f88c7b0 move script sections info individual files and comply with shellcheck (Julian Fleischer)
Pull request description:
This PR is extracted from https://github.com/bitcoin/bitcoin/pull/13816 to make that one easier to review. It follows on https://github.com/bitcoin/bitcoin/pull/13849 and https://github.com/bitcoin/bitcoin/pull/13851
In here the shell script parts from `travis.yml` are extracted into `.travis/before_install.sh`, `.travis/install.sh`, `.travis/before_script.sh`, `.travis/script.sh`, and `.travis/lint.sh`.
This has the benefit that `test/lint/lint-shell.sh` will also shellcheck these parts. Also it makes the individual script parts more readable.
Tree-SHA512: c497e1687ceb1c1d795de177d3fc35af908bc8e3f781a871afabdecf031e581d4db229290627249e35ef7c09952bc34884e4734ea91d40f57b4a9efb85bba2e3
5778bf95d9 Report minfeefilter value in getpeerinfo rpc (Anthony Towns)
Pull request description:
Lowering the minimum relay fee is only useful when many nodes in the p2p network also lower the fee, so to make it easier to understand progress on that front, this includes the value of the minfeefilter in getpeerinfo, so you at least have visibility to what fees your neighbours are currently accepting.
Tree-SHA512: 059f01bf2a32c98fce1648a13b7898701203b354d0209ee34e6683994b720eb594cf24968e66b699caae5e17e53d351e73281f042dd094decde14d3a318e9fb3
Lowering the minimum relay fee is only useful when many nodes in the
p2p network also lower the fee, so to make it easier to understand
progress on that front, this includes the value of the minfeefilter in
getpeerinfo, so you at least have visibility to what fees your neighbours
are currently accepting.
870bd4c73d Update functional RBF test to check replaceable flag (dexX7)
820d31f95f Add "bip125-replaceable" flag to mempool RPCs (dexX7)
Pull request description:
This pull request adds a flag "bip125-replaceable" to the mempool RPCs getrawmempool, getmempoolentry, getmempoolancestors and getmempooldescendants, which indicates whether an unconfirmed transaction might be replaced.
Initially the flag was added to the raw transaction RPCs, but thanks to @conscott, it was moved to the mempool RPCs, which actually have access to the mempool.
~~This pull request adds a flag "bip125-replaceable" to the RPCs "getrawtransaction" and "decoderawtransaction", which indicates, whether a transaction signals BIP 125 replaceability.~~
There was some discussion in #7817, whether showing replaceability in the UI could lead to the false assumption that transactions that don't signal BIP 125 are truely non-replaceable, but given that this PR tackles the raw transaction interface, which is a rather low level tool, I believe having this extra piece of information isn't bad.
Tree-SHA512: 1f5511957af2c20a9a6c79d80a335c3be37a2402dbf829c40cceaa01a24868eab81a9c1cdb0b3d77198fa3bb82799e3540a5c0ce7f35bbac80d73f7133ff7cbc
317f2cb3f4 test: Check RPC settxfee errors (João Barbosa)
48618daf26 Add checks for settxfee reasonableness (Anthony Towns)
Pull request description:
When using the `settxfee` RPC, the value is silently ignored if it is less than either than minrelaytxfee or the wallet's mintxfee. This adds an error response if that's going to happen, but still allows "settxfee 0" to deliberately default to the minimum value.
Tree-SHA512: ce685584cf8d6b9ca2cc97196d494220e3892b6a804a458086e04b3a23df281da432ad0a3053106a064c90c541ddb6f6b96a27cf8376d45af1e44449baf88456
faaac5caaa RPCTypeCheck bip32derivs arg in walletcreatefunded (Gregory Sanders)
1f0c4282e9 QA: add basic walletcreatefunded optional arg test (Gregory Sanders)
1f18d7b591 walletcreatefundedpsbt: remove duplicate replaceable arg (Gregory Sanders)
2252ec5008 Allow ConstructTransaction to not throw error with 0-input txn (Gregory Sanders)
Pull request description:
1) Previously an empty input argument transaction that is marked for replaceability fails to pass the `SignalsOptInRBF` check right before funding it. Explicitly check for that condition before throwing an error.
2) The rpc call had two separate `replaceable` arguments, each of which being used in mutually exclusive places. I preserved the `options` version to retain compatability with `fundtransaction`.
Tree-SHA512: 26eb0c9e2d38ea51d11f741d61100223253271a084adadeb7e78c6d4e9004636f089e4273c5bf64a41bd7e9ff795317acf30531cb36aeb0d8db9304b3c8270c3
fa091b0016 qa: Add tests for submitheader (MarcoFalke)
36b1b63f20 rpc: Expose ProcessNewBlockHeaders (MarcoFalke)
Pull request description:
This exposes `ProcessNewBlockHeaders` as an rpc called `submitheader`. This can be used to check for invalid block headers and submission of valid block headers via the rpc.
Tree-SHA512: a61e850470f15465f88e450609116df0a98d5d9afadf36b2033d820933d8b6a4012f9f2b3246319c08a0e511bef517f5d808cd0f44ffca91d10895a938004f0b
5df6f089b5 More tests of signer checks (Andrew Chow)
7c8bffdc24 Test that a non-witness script as witness utxo is not signed (Andrew Chow)
8254e9950f Additional sanity checks in SignPSBTInput (Pieter Wuille)
c05712cb59 Only wipe wrong UTXO type data if overwritten by wallet (Pieter Wuille)
Pull request description:
The current PSBT signing code can end up producing a non-segwit signature, while only the UTXO being spent is provided in the PSBT (as opposed to the entire transaction being spent). This may be used to trick a user to incorrectly decide a transaction has the semantics he intends to sign.
Fix this by refusing to sign if there is any mismatch between the provided data and what is being signed.
Tree-SHA512: b55790d79d8166e05513fc4c603a982a33710e79dc3c045060cddac6b48a1be3a28ebf8db63f988b6567b15dd27fd09bbaf48846e323c8635376ac20178956f4
bd19cc78cf Serialize non-witness utxo as a non-witness tx but always deserialize as witness (Andrew Chow)
43811e6338 Fix PSBT deserialization of 0-input transactions (Andrew Chow)
Pull request description:
0-input transactions can be ambiguously deserialized as being witness transactions. Since the unsigned transaction is never serialized as a witness transaction as it has no witnesses, we should always deserialize it as a non-witness transaction and set the serialization flags as such.
When a transaction is serliazed for the non-witness-utxo, it is always a valid network transaction and thus it should be always be deserialized as a witness transaction and the deserialzation flags are set as such.
Fixes#13958
Tree-SHA512: 1937b3cb2618534478d4f533541fb9efce3cb5badb5d1964bfe19400f4aacc6c8ecedaf1f20d26b20baf94f81fd07dfb15b3b08089ecbd63aeecbc18c7c48086
0-input transactions can be ambiguously deserialized as being witness
transactions. Since the unsigned transaction is never serialized as
a witness transaction as it has no witnesses, we should always
deserialize it as a non-witness transaction and set the serialization
flags as such.
Also always serialize the unsigned transaction as a non-witness transaction.
68400d8b96 tests: Use explicit imports (practicalswift)
Pull request description:
Enable automatic detection of undefined names in Python tests scripts. Remove wildcard imports.
Wildcard imports make it unclear which names are present in the namespace, confusing both readers and many automated tools.
An additional benefit of not using wildcard imports in tests scripts is that readers of a test script then can infer the rough testing scope just by looking at the imports.
Before this commit:
```
$ contrib/devtools/lint-python.sh | head -10
./test/functional/feature_rbf.py:8:1: F403 'from test_framework.util import *' used; unable to detect undefined names
./test/functional/feature_rbf.py:9:1: F403 'from test_framework.script import *' used; unable to detect undefined names
./test/functional/feature_rbf.py:10:1: F403 'from test_framework.mininode import *' used; unable to detect undefined names
./test/functional/feature_rbf.py:15:12: F405 bytes_to_hex_str may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:17:58: F405 CScript may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:25:13: F405 COIN may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:26:31: F405 satoshi_round may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:26:60: F405 COIN may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:30:41: F405 satoshi_round may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
./test/functional/feature_rbf.py:30:68: F405 COIN may be undefined, or defined from star imports: test_framework.mininode, test_framework.script, test_framework.util
$
```
After this commit:
```
$ contrib/devtools/lint-python.sh | head -10
$
```
Tree-SHA512: 3f826d39cffb6438388e5efcb20a9622ff8238247e882d68f7b38609877421b2a8e10e9229575f8eb6a8fa42dec4256986692e92922c86171f750a0e887438d9
To avoid:
$ make check
{…omissis…}
Running test/util/bitcoin-util-test.py...
/usr/local/bin/python3.7 ../test/util/bitcoin-util-test.py
../test/util/bitcoin-util-test.py:31: DeprecationWarning: This method will be removed in future versions. Use 'parser.read_file()' instead.
config.readfp(open(os.path.join(os.path.dirname(__file__), "../config.ini"), encoding="utf8"))
$ python3 --version
Python 3.7.0
cf9ed307e6 qa: blocktools enforce named args for amount (MarcoFalke)
Pull request description:
Since #13669 changed some signatures, I think it might be worthwhile to enforce named args for primitive types such as amounts.
Tree-SHA512: 2733e7b6a20590b54bd54e81a09e3f5e2fadf4390bed594916b70729bcf485b048266012c1203369e0968032a2c6a2719107ac17ee925d8939af3df916eab1a6
4b7091a842 Replace median fee rate with feerate percentiles (Marcin Jachymiak)
Pull request description:
Currently, the `medianfeerate` statistic is calculated from the feerate of the middle transaction of a list of transactions sorted by feerate.
This PR instead uses the value of the 50th percentile weight unit in the block, and also calculates the feerate at the 10th, 25th, 75th, and 90th percentiles. This more accurately corresponds with what is generally meant by median feerate.
Tree-SHA512: 59255e243df90d7afbe69839408c58c9723884b8ab82c66dc24a769e89c6d539db1905374a3f025ff28272fb25a0b90e92d8101103e39a6d9c0d60423a596714
4441ad677a Make format string linter understand basic template parameter syntax (practicalswift)
Pull request description:
Make format string linter understand basic template parameter syntax.
Fixes issue described in https://github.com/bitcoin/bitcoin/pull/13705#issuecomment-412046126.
Thanks to @ken2812221 for reporting!
Tree-SHA512: 8fb995bc6b29d8b9926ef5969e02cf71c494e829434fcdeb4ed5fabad5ab96e86e5b8eea705e8a416927757b4fa4e58abc0fd4f483daa58c94e2c6fdcb8ee822
e306be7429 Use 72 byte dummy signatures when watching only inputs may be used (Andrew Chow)
48b1473c89 Use 71 byte signature for DUMMY_SIGNATURE_CREATOR (Andrew Chow)
18dfea0dd0 Always create 70 byte signatures with low R values (Andrew Chow)
Pull request description:
When creating signatures for transactions, always make one which has a 32 byte or smaller R and 32 byte or smaller S value. This results in signatures that are always less than 71 bytes (32 byte R + 32 byte S + 6 bytes DER + 1 byte sighash) with low R values. In most cases, the signature will be 71 bytes.
Because R is not mutable in the same way that S is, a low R value can only be found by trying different nonces. RFC 6979 for deterministic nonce generation has the option to specify additional entropy, so we simply use that and add a uin32_t counter which we increment in order to try different nonces. Nonces are sill deterministically generated as the nonce used will the be the first one where the counter results in a nonce that results in a low R value. Because different nonces need to be tried, time to produce a signature does increase. On average, it takes twice as long to make a signature as two signatures need to be created, on average, to find one with a low R.
Having a fixed size signature makes size calculations easier and also saves half a byte of transaction size, on average.
DUMMY_SIGNATURE_CREATOR has been modified to produce 71 byte dummy signatures instead of 72 byte signatures.
Tree-SHA512: 3cd791505126ce92da7c631856a97ba0b59e87d9c132feff6e0eef1dc47768e81fbb38bfbe970371bedf9714b7f61a13a5fe9f30f962c81734092a4d19a4ef33
Removes medianfeerate result from getblockstats.
Adds feerate_percentiles which give the feerate of the 10th, 25th, 50th,
75th, and 90th percentile weight unit in the block.
fafe73a626 qa: Raise feature_help timeout to 5s (MarcoFalke)
faabd7bc47 qa: Use files for stdout/stderr to support Windows (MarcoFalke)
facb56ffaf qa: Run gen_rpcauth with sys.executable (MarcoFalke)
fada8966c5 qa: Close stdout and stderr file when node stops (MarcoFalke)
Pull request description:
### qa: Close stdout and stderr file when node stops
Since these files are potentially deleted by the test framework for cleanup, they should be closed first. Otherwise this will lead to errors on Windows when the tests finish successfully.
Side note: After the patch, it is no longer possible to reopen the file on Windows (see https://docs.python.org/3/library/tempfile.html#tempfile.NamedTemporaryFile)
### qa: Run gen_rpcauth with sys.executable
Similar to `test_runner.py`, the `sys.executable` needs to be passed down into subprocesses to pass on native Windows. (Should have no effect on Linux)
### qa: Use files for stdout/stderr to support Windows
It seems that using PIPE is not supported on Windows. Also, it is easier to just use the files that capture the stdout and stderr within the test node class.
Tree-SHA512: ec675012b10705978606b7fcbdb287c39a8e6e3732aae2fa4041d963a3c6993c6eac6a9a3cbd5479514e7d8017fe74c12235d1ed6fed2e8af8f3c71981e91864
fa85c985ed qa: Add p2p_invalid_locator test (MarcoFalke)
Pull request description:
Should not be merged *before* #13907
Tree-SHA512: a67ca407854c421ed20a184d0b0dc90085aed3e3431d9652a107fa3022244767e67f67e50449b7e95721f56906836b134615875f28a21e8a012eb22cfe6a66a5
1f87c372b5 Simplify comparison in rpc_blockchain.py. (Daniel Kraft)
Pull request description:
The test for `gettxoutsetinfo` in `rpc_blockchain.py` verifies that the result is the same as before after invalidating and reconsidering a block. The comparison has to exclude the `disk_size` field, though, as it is not deterministic.
Instead of comparing all the other fields for equality, this change explicitly removes the `disk_size` field and then compares the full objects. This makes the intent more explicit (compare everything except for `disk_size`, not compare just a given list of fields) and also the code simpler.
Tree-SHA512: 3c376a8836b62988fb2f0117c9ca65de64a33bf3cd4980a123de30bf5e7b7a48eda477b25e03d672ff076e205c698e83432469156caa0f0f3ebbb0480f0dd77d
When extra entropy is not specified by the caller, CKey::Sign will
now always create a signature that has a low R value and is at most
70 bytes. The resulting signature on the stack will be 71 bytes when
the sighash byte is included.
Using low R signatures means that the resulting DER encoded signature
will never need to have additional padding to account for high R
values.
The test for gettxoutsetinfo in rpc_blockchain.py verifies that the
result is the same as before after invalidating and reconsidering a
block. The comparison has to exclude the 'disk_size' field, though, as
it is not deterministic.
Instead of comparing all the other fields for equality, this change
explicitly removes the 'disk_size' field and then compares the full
objects. This makes the intent more explicit (compare everything except
for disk_size, not compare just a given list of fields) and also the
code simpler.
fa5587fe71 qa: wait_for_verack by default (MarcoFalke)
Pull request description:
This removes the need to do so manually every time a connection is added.
Tree-SHA512: a46c92cb4df41e30778b42b9fd3dcbd8d2d82aa7503d1213cb1c1165034f648d8caee01c292e2d87d05b0f71696996eef5be8a753f35ab49e5f66b0e3bf29f21
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
ParseHashV validates the length and encoding of the string and throws
an informative RPC error on failure, which is as good or better than
these alternative calls.
Note I switched ParseHashV to check string length first, because
IsHex tests that the length is even, and an error like:
"must be of length 64 (not 63, for X)" is much more informative than
"must be hexadecimal string (not X)"
faa24441ec policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
This linter checks that the number of arguments passed to each variadic format
string function matches the number of format specifiers in the format string.
a1a998cf24 wallet: Fix backupwallet for multiwallets (Daniel Kraft)
Pull request description:
`backupwallet` was broken for multiwallets in their own directories (i.e. something like `DATADIR/wallets/mywallet/wallet.dat`). In this case, the backup would use `DATADIR/wallets/wallet.dat` as source file and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source file was not present) or would silently back up the wrong wallet; especially the latter behaviour can be quite bad for users.
Tree-SHA512: 7efe2450ca047e40719fcc7cc211ed94699056020ac737cada7b59e8240298675960570c45079add424d0aab520437d5050d956acd695a9c2452dd4317b4d2c4
fa67505e1e qa: Quote wallet name for rpc path (MarcoFalke)
Pull request description:
When using external multiwallets they are specified by their full path which might contain non-ascii characters (e.g. umlauts or emojis).
Fix this by url-quoting the path.
Tree-SHA512: 7cc66514579d9f602f88a6817c5ab43a44c6d3711df452dc904173f0bc34e2c0b2c34877497f06b61f6720c532fa183053f54622dc454e316c89cee7eaa72463
fa5b440971 qa: Extract rpc_timewait as test param (MarcoFalke)
Pull request description:
Also increase it for wallet_dump and wallet_groups
Tree-SHA512: 7367bc584228bda3010c453713a1505c54a8ef3d116be47dab9934d30594089dfeb27ffa862f7517fd0ec8b5dc07f4904d67ef2a53dd284cbe2a58982e410e2b
f6b7fc349c Support h instead of ' in hardened descriptor paths (Pieter Wuille)
fddea672eb Add experimental warning to scantxoutset (Jonas Schnelli)
6495849bfd [QA] Extend tests to more combinations (Pieter Wuille)
1af237faef [QA] Add xpub range tests in scantxoutset tests (Jonas Schnelli)
151600bb49 Swap in descriptors support into scantxoutset (Pieter Wuille)
0652c3284f Descriptor tests (Pieter Wuille)
fe8a7dcd78 Output descriptors module (Pieter Wuille)
e54d76044b Add simple FlatSigningProvider (Pieter Wuille)
29943a904a Add more methods to Span class (Pieter Wuille)
Pull request description:
As promised, here is an implementation of my output descriptor concept (https://gist.github.com/sipa/e3d23d498c430bb601c5bca83523fa82) and integration within the `scantxoutset` RPC that was just added through #12196.
It changes the RPC to use descriptors for everything; I hope the interface is simple enough to encompass all use cases. It includes support for P2PK, P2PKH, P2WPKH, P2SH, P2WSH, multisig, xpubs, xprvs, and chains of keys - combined in every possible way.
Tree-SHA512: 63b54a96e7a72f5b04a8d645b8517d43ecd6a65a41f9f4e593931ce725a8845ab0baa1e9db6a7243190d8ac841f6e7e2f520d98c539312d78f7fd687d2c7b88f
a13647b8bd [qa] Add test for too-large wallet output groups (Suhas Daftuar)
57ec1c97b2 [wallet] correctly limit output group size (Suhas Daftuar)
Pull request description:
Also add a test to ensure that output groups are being limited, even if a wallet has many outputs corresponding to the same scriptPubKey (the test fails without the first commit).
Tree-SHA512: 2aaa82005b0910488f5cbf40690d4c5e2f46949e299ef70b4cb6e440713811443d411dcbc6d71b1701fd82423073125e21747787d70830cd021c841afb732d51
fad231ad41 Fix merging of global unknown data in PSBTs (Andrew Chow)
41df035ee1 Check that PSBT keys are the correct length (Andrew Chow)
Pull request description:
This PR fixes a few bugs that were found and adds tests checking for these errors.
Specifically:
- Single byte keys are checked to actually be one byte.
- Unknown global data must be merged when combining two PSBTs.
Tree-SHA512: c0e7b4bc607d510cc005aaa7c0813ee58c5467ab7ce4adce485522dfeee92b1af3d29fe89df778b0ea812bb3827e085b30e04d4f4ebcefd8364d809573991332
12dd101345 scripted-diff: Remove trailing whitespaces (João Barbosa)
Pull request description:
The script test/lint/lint-whitespace.sh should prevent new cases.
This happens in some pulls where the code editor and the author 'git add's them, so this would fix it all.
Tree-SHA512: bcdd3472fcd01a2754e52212c7db1de2fdc422728b06785481954a27162fb72001cb73708329cc56e95bcc5e45c1348ebc4eacc2ccfa6aa12413c7ec450b6a33
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
https://github.com/bitcoin/bitcoin/pull/13715 introduced a new check
for _transport.is_closing() in mininode's P2PConnection's. This function
is only available from Python 3.4.4, though, while Bitcoin is supposed
to support all Python 3.4 versions.
In this change, we make the check conditional on is_closing() being
available. If it is not, then we revert to the behaviour before the
check was introduced; this means that
https://github.com/bitcoin/bitcoin/issues/13579 is not fixed for old
systems, but at least the tests work as they used to do before.
This includes a small refactoring from a one-line lambda to an
inline function, because this makes the code easier to read with more
and more conditions being added.
Fixes https://github.com/bitcoin/bitcoin/issues/13745.
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
5f019d5354 Removes the boost/algorithm/string/join dependency (251)
Pull request description:
This commit removes the `boost/algorithm/string/join` dependency from the project by replacing `boost::algorithm::join` with the helper function proposed by @MarcoFalke in https://github.com/bitcoin/bitcoin/pull/13726#discussion_r204159967
Tree-SHA512: d4ba3e7621b76bd5210aec9b8d6c320f7ee963d7f902e6d2d3fc0eadbee1cd77799e5c09be9c11452d2825f25740fc436cdec3a6b6c66ced674d771e4ed306ae
f447a0a707 Remove program options from build system (Chun Kuan Lee)
11588c639e Replace boost program_options (Chun Kuan Lee)
Pull request description:
Concept from #12744, but without parsing negated options.
Tree-SHA512: 7f418744bb8934e313d77a5f162633746ef5d043de802b9c9cd9f7c1842e7e566eb5f171cd9e2cc13317281b2449c6fbd553fa4f09b837e6af2f5d2b2aabdca2
5c613aadd6 lint: Add linter for circular dependencies (Ben Woosley)
Pull request description:
Protects against added circular depencies, makes it explicit in the
code when circular dependencies have been removed.
Modeled after EXPECTED_BOOST_INCLUDES in lint-includes.sh
Example output:
```
$ test/lint/lint-circular-dependencies.sh
A new circular dependency in the form of "qt/paymentserver -> qt/walletmodel -> qt/paymentserver" appears to have been introduced.
$ echo $?
1
$ test/lint/lint-circular-dependencies.sh
Good job! The circular dependency "Fake" is no longer present.
Please remove it from EXPECTED_CIRCULAR_DEPENDENCIES in test/lint/lint-circular-dependencies.sh
to make sure this circular dependency is not accidentally reintroduced.
$ echo $?
1
$ test/lint/lint-circular-dependencies.sh
$ echo $?
0
```
Tree-SHA512: 4519434de29f6d50859daed1480e531c01c1cdbc3f0a5f093251daf62ae2b5b9073fb274b86f541a985e06837aa1165b76558c5f35fb51a759d72e83f1b61e44
fa4bf92be9 Remove dead service bits code (MarcoFalke)
Pull request description:
Seems fine to remove for the upcoming 0.17 release
Fixes#10993
Tree-SHA512: 3a4664b787e3da399bcaaba693619bd384826df14f469dbdfbbfffc540d9da3f2b322cda262b43388376785f77907c2540541c239ab0fca82bd7eb69d02b6b7a
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
Checks that all of the one byte type keys are actually one byte and
throw an error if they are not.
Add tests for each type to check for this behavior.
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
fabe28a0cd qa: Temporarily disable test that reads the default datadir location (MarcoFalke)
41a8c8dfaf travis: Check that ~/.bitcoin is never created (MarcoFalke)
Pull request description:
Tree-SHA512: d114db29a18f684d207caa0d7c947b13c945e2dd8b6d7fdeacdf7aa194f8123579d1139331b9d308df69a1132796e805a9ab63580aebde9b719860c0ff4b5652
Protects against added circular depencies, makes it explicit in the
code when circular dependencies have been removed.
Modeled after EXPECTED_BOOST_INCLUDES in lint-includes.sh
b9f4b211df tests: Use MAX_SCRIPT_ELEMENT_SIZE from script.py (Daniel Kraft)
Pull request description:
`p2p_segwit.py` and `test_framework/script.py` both define a constant for `MAX_SCRIPT_ELEMENT_SIZE` (=520 bytes), which is redundant. This change uses the constant defined in the `script.py` module for `p2p_segwit.py`.
Tree-SHA512: 2bc295ff26d9b052d4e05b85c27e748175884d6689a92c19337fc4db8bf439e3abe3edc91af1aaf46d8dc42ed96a85ad17110546d2274a0d9cda3abd6b878a31
be98b2d9a8 [QA] Add scantxoutset test (Jonas Schnelli)
eec7cf7b33 scantxoutset: mention that scanning by address will miss P2PK txouts (Jonas Schnelli)
94d73d32ab scantxoutset: support legacy P2PK script type (Jonas Schnelli)
892de1dfea scantxoutset: add support for scripts (Jonas Schnelli)
78304941f7 Blockchain/RPC: Add scantxoutset method to scan UTXO set (Jonas Schnelli)
9048575511 Add FindScriptPubKey() to search the UTXO set (Jonas Schnelli)
Pull request description:
Alternative to #9152.
This takes `<n>` pubkeys and optionally `<n>` xpubs (together with a definable lookup windows where the default is 0-1000) and looks up common scripts in the UTXO set of all given or derived keys.
The output will be an array similar to `listunspent`. That array is compatible with `createrawtransaction` as well as with `signrawtransaction`.
This makes it possible to prepare sweeps and have them signed in a secure (cold) space.
Tree-SHA512: a2b22a117cf6e27febeb97e5d6fe30184926d50c0c7cbc77bb4121f490fed65560c52f8eac67a9720d7bf8f420efa42459768685c7e7cc03722859f51a5e1e3b
Added functional tests for PSBT that test the RPCs. Also added all
of the BIP 174 test vectors (except for the updater tests) in the
functional tests.
Added a Unit test for the BIP 174 updater test vector.
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
Commit 3fdb29778a renamed share/rpcuser to share/rpcauth but left references to the old path in code; this commit fixes the old references.
Performed update using https://github.com/facebook/codemod with command: `codemod --extensions cpp,py,md 'share/rpcuser' 'share/rpcauth'`
-BEGIN VERIFY SCRIPT-
git grep --files-with-matches 'share/rpcuser' src/*.cpp | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
git grep --files-with-matches 'share/rpcuser' test/functional/*.py | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
-END VERIFY SCRIPT-
backupwallet was broken for multiwallets in their own directories
(i.e. something like DATADIR/wallets/mywallet/wallet.dat). In this
case, the backup would use DATADIR/wallets/wallet.dat as source file
and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source
file was not present) or would silently back up the wrong wallet;
especially the latter behaviour can be quite bad for users.
38040c34e1 [tests] Remove accounts from wallet_importprunedfunds.py (John Newbery)
Pull request description:
This was split from #13075 to not block review/merge of that PR.
Tree-SHA512: 631d7139ed2bda5222ec395cc75720261e2e1f741dba04723d09fe04ef6cf92222a3679d886026ec33e2db2d1e2fa1a0f36c2451581d0f733a9939a98c7118ab
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
702ae1e21a [RPC] [wallet] allow getbalance to use min_conf and watch_only without accounts. (John Newbery)
cf15761f6d [wallet] GetBalance can take a min_depth argument. (John Newbery)
0f3d6e9ab7 [wallet] factor out GetAvailableWatchOnlyBalance() (John Newbery)
7110c830f8 [wallet] deduplicate GetAvailableCredit logic (John Newbery)
ef7bc8893c [wallet] Factor out GetWatchOnlyBalance() (John Newbery)
4279da4785 [wallet] GetBalance can take an isminefilter filter. (John Newbery)
Pull request description:
#12953 inadvertently removed the functionality to call `getbalance "*" <int> <bool>` to get the wallet's balance with either minconfs or include_watchonly.
This restores that functionality (when `-deprecatedrpc=accounts`), and also makes it possible to call ``getbalance minconf=<int> include_watchonly=<bool>` when accounts are not being used.
Tree-SHA512: 67e84de9291ed6d34b23c626f4dc5988ba0ae6c99708d02b87dd3aaad3f4b6baa6202a66cc2dadd30dd993a39de8036ee920fcaa8cbb1c5dfe606e6fac183344
eeeef80fb6 qa: Fix some TODOs in p2p_segwit (MarcoFalke)
Pull request description:
* I believe we don't need to redundantly test versionbits logic in every functional tests that tests a softfork deployment that is being done with versionbits. Thus, remove two `TODO`s that ask for that.
* Replace another `TODO` with `wait_until`.
* Some style fixups after #13467
Tree-SHA512: c7120404d50579d6f3b9092f1e259959190eeafe520231e3479c8c256a50bf7260ccc93f8301ac0e100c54037053f6849433ebb1c55607e01d94b9812e525083
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input hashTx
rather than the current now tx.
p2p_segwit.py and test_framework/script.py both define a constant for
MAX_SCRIPT_ELEMENT_SIZE (=520 bytes), which is redundant. This change
uses the constant defined in the script.py module for p2p_segwit.py.
685d1d8115 [tests] Check signrawtransaction* errors on missing prevtx info (Anthony Towns)
a3b065b51f Error on missing amount in signrawtransaction* (Anthony Towns)
Pull request description:
Signatures using segregated witness commit to the amount being spent, so that value must be passed into signrawtransactionwithkey and signrawtransactionwithwallet. This ensures an error is issued if that doesn't happen, rather than just assuming the value is 0 and producing a signature that is almost certainly invalid.
Based on Ben Woosley's #12458, Fixes: #12429.
Tree-SHA512: 8e2ff89d5bcf79548e569210af0d850028bc98d86c149b92207c9300ab1d63664a7e2b222c1be403a15941aa5cf36ccc3c0d570ee1c1466f3496b4fe06c17e11
d280617bf5 [qa] Add a test for merkle proof malleation (Suhas Daftuar)
ed82f17000 have verifytxoutproof check the number of txns in proof structure (Gregory Sanders)
Pull request description:
Recent publication of a weakness in Bitcoin's merkle tree construction demonstrates many SPV applications vulnerable to an expensive to pull off yet still plausible attack: https://bitslog.wordpress.com/2018/06/09/leaf-node-weakness-in-bitcoin-merkle-tree-design/
This change would at least allow `verifytxoutproof` to properly validate that the proof matches a known block, with known number of transactions any time after the full block is processed. This should neuter the attack entirely.
The negative is that a header-only processed block/future syncing mode would cause this to fail until the node has imported the data required.
related: #13451
`importprunedfunds` needs this check as well. Can expand it to cover this if people like the idea.
Tree-SHA512: 0682ec2b622a38b29f3f635323e0a8b6fc071e8a6fd134c954579926ee7b516e642966bafa667016744ce49c16e19b24dbc8801f982a36ad0a6a4aff6d93f82b
57889e688d bitcoin-tx: Stricter check for valid integers (Daniel Kraft)
Pull request description:
Just calling `atoi` to convert strings to integers does not check for valid integers very thoroughly; in particular, it just ignores everything starting from the first non-numeral character. Even a string like "foo" is fine and silently returns 0.
This meant that `bitcoin-tx` would not fail if such a string was passed in various places where an integer is expected (like the `locktime` or an input/output index); this means that it would, for instance, silently accept a typo and interpret it in an unexpected way.
In this change, we use `ParseInt64` for parsing strings to integers, which actually verifies that the full string is valid as number. New tests in the `bitcoin-util-test` cover the new error paths.
This fixes#13599.
Tree-SHA512: 146a0af275e9f57784e5d0582d3defbac35551b54b6b7232f8a0b20db04aa611125e52aa4512ef2f8ed2cafc2a12fe586f9d10ed66d641cff090288f279b1988
161e8d40a4 RPC: Add new getzmqnotifications method. (Daniel Kraft)
caac39b0ac Make ZMQ notification interface instance global. (Daniel Kraft)
Pull request description:
This adds a new RPC method `getzmqnotifications`, which returns information about all active ZMQ notification endpoints. This is useful for software that layers on top of bitcoind, so it can verify that ZeroMQ is enabled and also figure out where it should listen.
See #13526.
Tree-SHA512: edce722925741c84ddbf7b3a879fc9db1907e5269d0d97138fe724035d93ee541c2118c24fa92f4197403f380d0e25c2fda5ca6c62d526792ea749cf527a99a0
ea65182f03 [wallet] loadwallet shouldn't create new wallets. (John Newbery)
Pull request description:
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
Tree-SHA512: 0a59fa8a33fde51a88544ad288b00e4995284fe16424f643076aaba42b8244fff362145217650ee53d518dfab7efbed4237632c34cdd3dcbbecaa9ecaab5fd7b
Just calling atoi to convert strings to integers does not check for
valid integers very thoroughly; in particular, it just ignores
everything starting from the first non-numeral character. Even a string
like "foo" is fine and silently returns 0.
This meant that bitcoin-tx would not fail if such a string was passed in
various places where an integer is expected (like the locktime or an
input/output index); this means that it would, for instance, silently
accept a typo and interpret it in an unexpected way.
In this change, we use ParseInt64 for parsing strings to integers,
which actually verifies that the full string is valid as number.
New tests in the bitcoin-util-test cover the new error paths.
e3aab295e [tests] p2p_segwit: sync_blocks in subtest wrapper. (John Newbery)
55e805085 [tests] p2p_segwit: remove unnecessary arguments from subtests. (John Newbery)
25711c269 [tests] p2p_segwit: log and assert segwit status in subtest wrapper. (John Newbery)
6839863d5 [tests] p2p_segwit: Make sure each subtest leaves utxos for the next. (John Newbery)
bfe32734d [tests] p2p_segwit: wrap subtests with subtest wrapper. (John Newbery)
2af4e398d [tests] p2p_segwit: re-order function definitions. (John Newbery)
94a0134a4 [tests] p2p_segwit: standardise comments/docstrings. (John Newbery)
f7c7f8ecf [tests] p2p_segwit: Fix flake8 warnings. (John Newbery)
Pull request description:
`p2p_segwit.py` is a very long test, composed of multiple subtests. When it fails it's difficult to debug for a couple of reasons:
- Control flow jumps between different methods in the test class, so it's a little difficult to follow the code.
- state may be carried forward unintentionally from one subtest to the next.
Improve that by wrapping the subtests with a `@subtest` decorator which:
- logs progress
- asserts state after each subtest
As usual, I've also included a few commits which generally tidy up the test and improve style.
Tree-SHA512: 3650602b3ce9823dc968cc5f2e716757feadc3dbedb3605eb79bb3df91a6db8ae53431f253b440da690e3a8e9d76de84fad4368a2663aeb40e6b9427cf948870
This adds a new RPC method "getzmqnotifications", which returns
information about all active ZMQ notification endpoints. This is useful
for software that layers on top of bitcoind, so it can verify that
ZeroMQ is enabled and also figure out where it should listen.
See https://github.com/bitcoin/bitcoin/issues/13526.
75848bcf40 [tests] Fix p2p_sendheaders race (John Newbery)
Pull request description:
p2p_sendheaders has a race in part 1.3.
part 1.2 sends a block to the node over the 'test_node' connection, but
doesn't wait for an inv to be received on the 'inv_node' connection. If
we get to part 1.3 before that inv has been received, then the
subsequent call to check_last_inv_announcement could fail.
Tree-SHA512: ba9baffb3a9c0d379259190c737a7a4ad2e1133005a5b026af4f6b67a2978e24db39289551ad29134151879593ef5472be7e569a3557c0740fb51f5c56263d9a
fa87da2f17 qa: Avoid start/stop of the network thread mid-test (MarcoFalke)
Pull request description:
This simplifies test writing by removing the need to handle the network thread in tests. E.g. start thread, join thread, restart thread mid-test, adding p2p connections at the "right" time, ...
Tree-SHA512: 533642f12fef5496f1933855edcdab1a7ed901d088d34911749cd0f9e044c8a6cb1f89985ac3a7f41a512943663e4e270a61978f6f072143ae050cd102d4eab8
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
fa103a5d5e [qa] wallet_basic: Specify minimum required amount for listunspent (MarcoFalke)
Pull request description:
A value less than that would fail the tests later on anyway:
```
File "./test/functional/wallet_basic.py", line 250, in run_test
self.nodes[1].sendrawtransaction(signed_raw_tx['hex'])
test_framework.authproxy.JSONRPCException: bad-txns-in-belowout, value in (1.00) < value out (49.998) (code 16) (-26)
Tree-SHA512: 7e72ad02b5623bc078610da06c34721836822a920a4e85b12a1e0f339e3205cdc11d39763197770e649fb73376f922ff91a8f244b465195e50a6798658e04f80
df10f07db1 [wallet] Don't use accounts when checking balance in sendmany (John Newbery)
e209184101 [wallet] deprecate sendfrom RPC method. (John Newbery)
Pull request description:
A couple of fixups from the accounts API deprecation PR (#12953):
- properly deprecate `sendfrom`
- don't use accounts when calculating balance in `sendmany` (unless the `-deprecatedrpc=accounts` flag is being used)
Tree-SHA512: 1befde055067438c4c3391bbff1aaed0e6249efd708c567db3f1faad40a0f28e64f95e5bad0679ae826d24a0239e4bc8a1c392dc93e2e7502343a7f6b1d1845c
927e1150bc Test: Harden lint-filenames.sh (wodry)
Pull request description:
- This fixes that only files with lower case file name suffix where found before, which contradicted the Regex to find uppercase characters in file names (including suffixes I guess).
- `--full-name` switch was added to git ls-files, to define that the found file always includes it's full path in the git project.
- since we know now that the file name includes the full path, we can harden the Regex to exclude the secp256k1 and univalue sub folders.
- use backslash line break to make code easier to read and avoid too long line.
Tree-SHA512: 9b55fe4965ae2084112b9f8a81bf9c657756c2cb5004986e7b6102a76adaf62c7d7a53257d9f13c5d8a1c75870b52c744d13830e3edd454a099e810357c914e5
000000035b Obsolete #!/bin/bash shebang (DesWurstes)
Pull request description:
> `#!/bin/bash` assumes it is always installed to `/bin/` which can cause issues
> `#!/usr/bin/env bash` searches the user's `PATH` to find the `bash` binary
Details: https://github.com/dylanaraps/pure-bash-bible#obsolete-syntax
I'm open to comments: Should I also fix `#!/bin/sh`?
Tree-SHA512: b47bb4828116aa119f1899c68fee081270d51a898535490b9c616bf0f3660ad953f29c361eafc759bc64cdd54ee6eeecb2d79e9fdb5291a996a515c719805476
fa1eac9cdb [qa] mininode: Expose connection state through is_connected (MarcoFalke)
Pull request description:
This gets rid of some non-type safe string comparisons and access to members that are implementation details of `class P2PConnection(asyncore.dispatcher)`. Such refactoring is required to replace the deprecated asyncore with something more sane.
Changes:
* Get rid of non-enum member `state` and replace is with bool `connected`
* Get rid of confusing argument `pushbuf` and literally just push to the buffer at the call site
Tree-SHA512: 09074c7e5ed251a2e0509ef205ab82f89887c1e1fa1cc6efc1db60d196eb2403788a4987df8809fd06d80ef652e614c5d3c3fdef70096fc5815102243388288d
p2p_sendheaders has a race in part 1.3.
part 1.2 sends a block to the node over the 'test_node' connection, but
doesn't wait for an inv to be received on the 'inv_node' connection. If
we get to part 1.3 before that inv has been received, then the
subsequent call to check_last_inv_announcement could fail.
