This commit adds support for .onion addresses (mapped into the IPv6
by using OnionCat's range and encoding), and the ability to connect
to them via a SOCKS5 proxy.
Prior to this change, each TX typically generated 3+ debug messages,
askfor tx 8644cc97480ba1537214 0
sending getdata: tx 8644cc97480ba1537214
askfor tx 8644cc97480ba1537214 1339640761000000
askfor tx 8644cc97480ba1537214 1339640881000000
CTxMemPool::accept() : accepted 8644cc9748 (poolsz 6857)
After this change, there is only one message for each valid TX received
CTxMemPool::accept() : accepted 22a73c5d8c (poolsz 42)
and two messages for each orphan tx received
ERROR: FetchInputs() : 673dc195aa mempool Tx prev not found 1e439346fc
stored orphan tx 673dc195aa (mapsz 19)
The -debugnet option, or its superset -debug, will restore the full debug
output.
- Signals now go directly from the core to WalletModel/ClientModel.
- WalletModel subscribes to signals on CWallet: Prepares for multi-wallet support, by no longer assuming an implicit global wallet.
- Gets rid of noui.cpp, the few lines that were left are merged into init.cpp
- Rename wxXXX message flags to MF_XXX, to make them UI indifferent.
- ThreadSafeMessageBox no longer returns the value `4` which was never used, converted to void.
The best log rotation method formerly available was to configure
logrotate with the copytruncate option. As described in the logrotate
documentation, "there is a very small time slice between copying the
file and truncating it, so some logging data might be lost".
By sending SIGHUP to the server process, one can now reopen the debug
log file without losing any data.
Acquire an exclusive, advisory lock before sending output to debug.log
and release it when we're done. This should avoid output from multiple
threads being interspersed in the log file.
We can't use CRITICAL_SECTION machinery for this because the debug log
is written during startup and shutdown when that machinery is not
available.
(Thanks to Gavin for pointing out the CRITICAL_SECTION problems based
on his earlier work in this area)
In ISO C++, the signedness of 'char' is undefined. On some platforms (e.g.
ARM), 'char' is an unsigned type, but some of the code relies on 'char' being
signed (as it is on x86). This is indicated by compiler warnings like this:
bignum.h: In constructor 'CBigNum::CBigNum(char)':
bignum.h:81:59: warning: comparison is always true due to limited range of data type [-Wtype-limits]
util.cpp: In function 'bool IsHex(const string&)':
util.cpp:427:28: warning: comparison is always false due to limited range of data type [-Wtype-limits]
In particular, IsHex erroneously returned true regardless of the input
characters, as long as the length of the string was a positive multiple of 2.
Note: For testing, it's possible using GCC to force char to be unsigned by
adding the -funsigned-char parameter to xCXXFLAGS.
This commit removes the dependency of serialize.h on PROTOCOL_VERSION,
and makes this parameter required instead of implicit. This is much saner,
as it makes the places where changing a version number can have an
influence obvious.
Where possible, use boost::filesystem::path instead of std::string or
char* for filenames. This avoids a lot of manual string tinkering, in
favor of path::operator/.
GetDataDir is also reworked significantly, it now only keeps two cached
directory names (the network-specific data dir, and the root data dir),
which are decided through a parameter instead of pre-initialized global
variables.
Finally, remove the "upgrade from 0.1.5" case where a debug.log in the
current directory has to be removed.
All client version information is moved to version.cpp, which optionally
(-DHAVE_BUILD_INFO) includes build.h. build.h is automatically generated
on supporting platforms via contrib/genbuild.sh, using git describe.
The git export-subst attribute is used to put the commit id statically
in version.cpp inside generated archives, and this value is used if no
build.h is present.
The gitian descriptors are modified to use git archive instead of a
copy, to create the src/ directory in the output. This way,
src/src/version.cpp will contain the static commit id. To prevent
gitian builds from getting the "-dirty" marker in their git-describe
generated identifiers, no touching of files or running sed on the
makefile is performed anymore. This does not seem to influence
determinism.
This commit simplifies the locking system: CCriticalSection becomes a
simple typedef for boost::interprocess::interprocess_recursive_mutex,
and CCriticalBlock and CTryCriticalBlock are replaced by a templated
CMutexLock, which wraps boost::interprocess::scoped_lock.
By making the lock type a template parameter, some critical sections
can now be changed to non-recursive locks, which support waiting via
condition variables. These are implemented in CWaitableCriticalSection
and WAITABLE_CRITICAL_BLOCK.
CWaitableCriticalSection is a wrapper for a different Boost mutex,
which supports waiting/notification via condition variables. This
should enable us to remove much of the used polling code. Important
is that this mutex is not recursive, so functions that perform the
locking must not call eachother.
Because boost::interprocess::scoped_lock does not support assigning
and copying, I had to revert to the older CRITICAL_BLOCK macros that
use a nested for loop instead of a simple if.
- rename wxMessageBox, remove redundant arguments to noui/qtui calls
- also, add flag to force blocking, modal dialog box for disk space warning etc
- clarify function naming
- no more special MessageBox needed from AppInit2, as window object is created before calling AppInit2
This introduces CNetAddr and CService, respectively wrapping an
(IPv6) IP address and an IP+port combination. This functionality used
to be part of CAddress, which also contains network flags and
connection attempt information. These extra fields are however not
always necessary.
These classes, along with logic for creating connections and doing
name lookups, are moved to netbase.{h,cpp}, which does not depend on
headers.h.
Furthermore, CNetAddr is mostly IPv6-ready, though IPv6
functionality is not yet enabled for the application itself.
Remembering all time samples makes nTimeOffset slow to respond to
system clock corrections. For instance, I start my node with a system
clock that's 30 minutes slow and run it for a few days. During that
time, I accumulate 10,000 offset samples with a median of 1800
seconds. Now I correct my system clock. Without this change, my node
must collect another 10,000 samples before nTimeOffset is correct
again. With this change, I must only accumulate 100 samples to
correct the offset.
Storing unlimited time samples also allows an attacker with many IP
addresses (ex, a large botnet) to perform a memory exhaustion attack
against Bitcoin nodes. The attacker sends a version message from each
IP to his target, consuming more of the target's memory each time.
Time samples are small, so this attack might be impractical under the
old code, but it's impossible with the new code.
The full list of time samples is rarely useful outside of debugging.
The node's time offset, however is useful for discovering local clock
drift, so it's displayed in all logging modes.
Replaced all occurrences of #if* __WXMSW__ with WIN32,
and all occurrences of __WXMAC_OSX__ with MAC_OSX, and made
sure those are defined appropriately in the makefile and bitcoin-qt.pro.
This replaces the openssl-based base64 encoder and decoder with a more
efficient internal one. Tested against the rfc4648 test vectors.
Decoder is based on JoelKatz' version.
Makefiles now build bitcoind only.
qmake/make in top-level directory is used to build Bitcoin QT
Deleted almost all #ifdef GUI from the code (left one possibly controversial one)
Deleted xpm/ files.
Using the comma as thousands separator causes problems for parts of the world
where comma == decimal point. Germans sending 0,001 bitcoins are unpleasantly
surprised when that results in 1 BTC getting sent.
there is no internal modification of any file in this commit
files are moved into directories according to established standards in
sourcecode distribution; these directories contain:
src - Files that are used in constructing the executable binaries,
but are not installed.
doc - Files in HTML and text format that document usage, quirks of
the implementation, and contributor checklists.
locale - Files that contain human language translation of strings
used in the program
contrib - Files contributed from distributions or other third party
implementing scripts and auxiliary programs
