Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
Previously if an existing watch only key was reimported with a new timestamp,
the new timestamp would not be saved in the key metadata, and would not be used
to update the wallet nTimeFirstKey value (which could cause rescanning to start
at the wrong point and miss transactions).
Issue was pointed out by Jonas Schnelli <dev@jonasschnelli.ch> in
https://github.com/bitcoin/bitcoin/pull/9108#issuecomment-279715550
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
Change ScanForWalletTransactions return value so it is possible to distinguish
scans that skip reading every block (due to the nTimeFirstKey optimization)
from scans that fail while reading the chainActive.Tip() block. Return value is
now non-null in the non-failing case.
This change doesn't affect any user-visible behavior, it is only an internal
API improvement. The only code currently using the ScanForWalletTransactions
return value is in importmulti, and importmulti always calls
ScanForWalletTransactions with a pindex pointing to the first block in
chainActive whose block time is >= (nLowestTimestamp - 7200), while
ScanForWalletTransactions would only return null without reading blocks when
pindex and every block after it had a block time < (nTimeFirstKey - 7200).
These conditions could never happen at the same time because nTimeFirstKey <=
nLowestTimestamp.
I'm planning to make a more substantial API improvement in the future (making
ScanForWalletTransactions private and exposing a higher level rescan method to
RPC code), but Matt Corallo <git@bluematt.me> pointed out this odd behavior
introduced by e2e2f4c "Return errors from importmulti if complete rescans are
not successful" yesterday, so I'm following up now to get rid of badness
introduced by that merge.
Prior to this commit pindexRescan was initialized to a chainActive.Tip().
However, the value of pindexRescan set at time of initialization was never
read before pindexRescan was being set to either chainActive.Genesis()
(case 1), FindForkInGlobalIndex(chainActive, locator) (case 2) or
chainActive.Genesis() (case 3). Thus, the initialization was redundant.
This commit a.) removes the redundant initialization and b.) simplifies
this logic so that pindexRescan is initialized to chainActive.Genesis()
(case 1 and 3), and set to FindForkInGlobalIndex(chainActive, locator)
(case 2) as needed.
83ac719 Change bitcoin address in RPC helpaddress to an invalid address, so people don't accidentally send coins there (like I did). (Marijn Stollenga)
Tree-SHA512: ca1163466a149d567b97efbfcfa8fdfe2d474245b4dd5a1a92555b4e87f8e99df5fee4cd79ef1ce6a98db2337846af78f37c2e6b31d02008b11fa0e151ce6590
This removes the option from the wallet to not pay a fee on "small"
transactions which spend "old" inputs.
This code is no longer worth keeping around, as almost all miners
prefer not to include transactions which pay no fee at all.
Warnings introduced by commit e2e2f4c "Return errors from importmulti if
complete rescans are not successful" and reported by Pavel Janík
<Pavel@Janik.cz> in https://github.com/bitcoin/bitcoin/pull/9773 and
https://github.com/bitcoin/bitcoin/pull/9827
wallet/test/wallet_tests.cpp: In member function ‘void wallet_tests::rescan::test_method()’:
wallet/test/wallet_tests.cpp:377:17: warning: declaration of ‘wallet’ shadows a global declaration [-Wshadow]
CWallet wallet;
Remove "nLowestTimestamp <= chainActive.Tip()->GetBlockTimeMax()" check from
importmulti, which is always true because nLowestTimestamp is set to the
minimum of the most recent block time and all the imported key timestamps,
which is necessarily lower than the maximum block time.
A new AssertLockHeld(cs_wallet) call was added in commit a58370e
"Dedup nTimeFirstKey update logic" (part of PR #9108).
The lock held assertion will fail when loading prexisting wallets files from
before the #9108 merge that have watch-only keys.
Because it is used inconsistently at least version 5.4.0 of g++ to
complains about methods that don't use override. There is two ways to go
about this: remove override from the methods having it, or add it to the
methods missing it. I chose the second.
When importing a watch-only address over importmulti with a specific timestamp,
the wallet's nTimeFirstKey is currently set to 1. After this change, the
provided timestamp will be used and stored as metadata associated with
watch-only key. This can improve wallet performance because it can avoid the
need to scan the entire blockchain for watch only addresses when timestamps are
provided.
Also adds timestamp to validateaddress return value (needed for tests).
Fixes#9034.
Additionally, accept a "now" timestamp, to allow avoiding rescans for keys
which are known never to have been used.
Note that the behavior when "now" is specified is slightly different than the
previous behavior when no timestamp was specified at all. Previously, when no
timestamp was specified, it would avoid rescanning during the importmulti call,
but set the key's nCreateTime value to 1, which would not prevent future block
reads in later ScanForWalletTransactions calls. With this change, passing a
"now" timestamp will set the key's nCreateTime to the current block time
instead of 1.
Fixes#9491
Minimum boost version was bumped to 1.47.0 in #8920, which
means the configure step won't even pass with older boost.
This version has boost filesystem v3, which means the
(crappy) fallbacks for older versions can go.
Preserve comment, order form, and account strings from the original wallet
transaction. Also set fTimeReceivedIsTxTime and fFromMe fields for consistency
with CWallet::CreateTransaction. The latter two fields don't influence current
wallet behavior, but do record that the transaction originated in the wallet
instead of coming from the network or sendrawtransaction.
More accurate than simply adding one byte per input, and properly handles the
case where the original transaction happened to have very small signatures
4b189c1 Change bumpfee result value from 'oldfee' to 'origfee'. (Alex Morcos)
0c0c63f Introduce WALLET_INCREMENTAL_RELAY_FEE (Alex Morcos)
e8021ec Use CWallet::GetMinimumFee in bumpfee (Alex Morcos)
ae9719a Refactor GetMinimumFee to give option of providing targetFee (Alex Morcos)
fe8e8ef [rpc] Add incremental relay fee to getnetworkinfo (Alex Morcos)
6b331e6 Fix to have miner test aware of new separate block min tx fee (Alex Morcos)
de6400d Fix missing use of dustRelayFee (Alex Morcos)
5b15870 Use incrementalRelayFee for BIP 125 replacement (Alex Morcos)
The result value indicates the actual fee on the transaction that was replaced. But there is an error message which uses the description 'oldfee' to refer to the original fee rate applied to the new transaction's estimated max size. It was confusing that two different uses of 'oldfee' had two different numeric values.
Have wallet's default bump value be higher than the default incrementalRelayFee to future proof against changes to incremental relay fee. Only applies when not setting the fee rate directly.
Use the wallet's fee calculation logic to properly clamp fee against minimums and maximums when calculating the fee for a bumpfee transaction. Unless totalFee is explictly given, in which case, manually check against min, but do nothing to adjust given fee.
In all cases do a final check against maxTxFee (after adding any incremental amount).
7ba0a00 Testing: listsinceblock should not use orphan block height. (Karl-Johan Alm)
ee5c1ce Bug-fix: listsinceblock: use closest common ancestor when a block hash was provided for a chain that was not the main chain. (Karl-Johan Alm)
c9f3062 Add fundrawtransactions new reserveChangeKey option to the release notes (Jonas Schnelli)
9eb325d [QA] Add test for fundrawtransactions new reserveChangeKey option (Jonas Schnelli)
9aa4e6a [Wallet] Add an option to keep the change address key, true by default (Jonas Schnelli)
This command allows a user to increase the fee on a wallet transaction T, creating a "bumper" transaction B.
T must signal that it is BIP-125 replaceable.
T's change output is decremented to pay the additional fee. (B will not add inputs to T.)
T cannot have any descendant transactions.
Once B bumps T, neither T nor B's outputs can be spent until either T or (more likely) B is mined.
Includes code by @jonasschnelli and @ryanofsky
In spite of the name FindLatestBefore used std::lower_bound to try
to find the earliest block with a nTime greater or equal to the
the requested value. But lower_bound uses bisection and requires
the input to be ordered with respect to the comparison operation.
Block times are not well ordered.
I don't know what lower_bound is permitted to do when the data
is not sufficiently ordered, but it's probably not good.
(I could construct an implementation which would infinite loop...)
To resolve the issue this commit introduces a maximum-so-far to the
block indexes and searches that.
For clarity the function is renamed to reflect what it actually does.
An issue that remains is that there is no grace period in importmulti:
If a address is created at time T and a send is immediately broadcast
and included by a miner with a slow clock there may not yet have been
any block with at least time T.
The normal rescan has a grace period of 7200 seconds, but importmulti
does not.
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
5113474 wallet: Use CDataStream.data() (Wladimir J. van der Laan)
e2300ff bench: Use CDataStream.data() (Wladimir J. van der Laan)
adff950 dbwrapper: Use new .data() method of CDataStream (Wladimir J. van der Laan)
a2141e4 streams: Remove special cases for ancient MSVC (Wladimir J. van der Laan)
af4c44c streams: Add data() method to CDataStream (Wladimir J. van der Laan)
On repeated calls to SelectCoins we try to meet the fee necessary for the last transaction, the new fee required might be smaller, so increase our change by the difference if we can.
Once we've picked coins and dummy-signed the transaction to calculate fee, if we don't have sufficient fee, then try to meet the fee by reducing change before resorting to picking new coins.
Performing signing in the inner loop has terrible performance
when many passes through are needed to complete the selection.
Signing before the algorithm is complete also gets in the way
of correctly setting the fee (e.g. preventing over-payment when
the fee required goes down on the final selection.)
Use of the dummy might overpay on the signatures by a couple bytes
in uncommon cases where the signatures' DER encoding is smaller
than the dummy: Who cares?
The meaning is clear from the context, and we're inconsistent here.
Also save typing when using named arguments.
- `bitcoinaddress` -> `address`
- `bitcoinprivkey` -> `privkey`
- `bitcoinpubkey` -> `pubkey`
Fee estimation can just check its own mapMemPoolTxs to determine the same information. Note that now fee estimation for block processing must happen before those transactions are removed, but this shoudl be a speedup.
5394b39 Wallet: Split main logic from InitLoadWallet into CreateWalletFromFile (Luke Dashjr)
fb0c934 Wallet: Let the interval-flushing thread figure out the filename (Luke Dashjr)
cee1612 reduce number of lookups in TransactionWithinChainLimit (Gregory Sanders)
af9bedb Test for fix of txn chaining in wallet (Gregory Sanders)
5882c09 CreateTransaction: Don't return success with too-many-ancestor txn (Gregory Sanders)
0b2294a SelectCoinsMinConf: Prefer coins with fewer ancestors (Gregory Sanders)
This change removes a mapValue.erase("version") statement which deletes a
mapValue entry that never existed. The statement was mistakenly added in commit
865c3a2383 in 2010 and is harmless but confusing.
This resolves an issue where a wallet transaction which failed to
relay previously because it couldn't make it into the mempool
will not try again until restart, even though mempool conditions
may have changed.
Abandoned and known-conflicted transactions are skipped.
Some concern was expressed that there may be users with many
unknown conflicts would waste a lot of CPU time trying to
add them to their memory pools over and over again. But I am
doubtful these users exist in any number, if they do exist
they have worse problems, and they can mitigate any performance
issue this might have by abandoning the transactions in question.
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
Change CCrypter to use vectors with secure allocator instead of buffers
on in the object itself which will end up on the stack. This avoids
having to call LockedPageManager to lock stack memory pages to prevent the
memory from being swapped to disk. This is wasteful.
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
2ca6b9d Remove last reference to CWalletDB from accounting_tests.cpp (Patrick Strateman)
02e2a81 Remove pwalletdb parameter from CWallet::AddAccountingEntry (Patrick Strateman)
d2e678d Add CWallet::ReorderTransactions and use in accounting_tests.cpp (Patrick Strateman)
59adc86 Add CWallet::ListAccountCreditDebit (Patrick Strateman)
86726d8 Rename `-optintofullrbf` option to `-walletrbf` (Wladimir J. van der Laan)
05fa823 wallet: Add BIP125 comment for MAXINT-1/-2 behavior (Wladimir J. van der Laan)
152f45b Add option to opt into full-RBF when sending funds (Peter Todd)
Remove the unused variable "blockTmp" in CMerkleTx::SetMerkleBranch. It
was previously used to read the block from disk if not provided as
argument, but is no longer needed.
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
Forward-ports two commits from 0.13:
- [0.13] Create a new HD seed after encrypting the wallet
- [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation
Github-Pull: #8389
Rebased-From: f142c11ac634df487cc4bc65a5f1c9a3e3563dd9 de45c065f0648c4c41b57cb492420ceeed29dd11
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
Before this, if someone imported a scriptPubKey directly (in hex form) using
importaddress, outputs sending to it would be treated as change, as the
corresponding CTxDestination was not added to the address book.
Fix this by trying to detect scriptPubKeys that are in fact convertible to a
CTxDestination and add them anyway. Add a warning to the RPC help to warn
against importing raw non-standard scripts.
fa83a5d [qa] wallet: Temporarily disable salvagewallet test (MarcoFalke)
fadd048 [doc] Link to clang-format in the developer notes (MarcoFalke)
fa72f7d [doc] Remove outdated line from listunspent RPC help, fix typo (MarcoFalke)
ac40ed7 Increase timeout waiting for pruned blk00000.dat (error10)
Verify that results correct (match known values), consistent (encrypt->decrypt
matches the original), and compatible with the previous openssl implementation.
Also check that failed encrypts/decrypts fail the exact same way as openssl.
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
b30fb42 test: Rename wallet.dat to wallet_test.dat (Wladimir J. van der Laan)
a25a4f5 wallet_ismine.h → script/ismine.h (Wladimir J. van der Laan)
f4eae2d test: Create test fixture for wallet (Wladimir J. van der Laan)
de39c95 test: move accounting_tests and rpc_wallet_tests to wallet/test (Wladimir J. van der Laan)
Without the newline I see "bein" where the two lines are concatenated:
Note that all inputs selected must be of standard form and P2SH scripts must *bein* the wallet using importaddress or addmultisigaddress (to calculate fees).
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
BerkeleyDB dump files have key and value lines indented.
The salvage code passes these to ParseHex as-is.
Check this in the tests (should just pass with current code).
Check for EOF before every getline, and warn when reading gets to EOF
before the end of the data.
Stricter error checking could shed more light on issues such as #7463
and #7379.
If number of conflict confirms cannot be determined, this means
that the block is still unknown or not yet part of the main chain,
for example during a reindex. Do nothing in that case,
instead of crash with an assertion.
Fixes#7234.
Add "bip125-replaceable" output field to listtransactions and gettransaction
which indicates if an unconfirmed transaction, or any unconfirmed parent, is
signaling opt-in RBF according to BIP 125.
d11fc16 [Wallet] Call notification signal when a transaction is abandoned (Jonas Schnelli)
df0e222 Add RPC test for abandoned and conflicted transactions. (Alex Morcos)
01e06d1 Add new rpc call: abandontransaction (Alex Morcos)
9e69717 Make wallet descendant searching more efficient (Alex Morcos)
Unconfirmed transactions that are not in your mempool either due to eviction or other means may be unlikely to be mined. abandontransaction gives the wallet a way to no longer consider as spent the coins that are inputs to such a transaction. All dependent transactions in the wallet will also be marked as abandoned.
Due to include ordering, defining in one place was not enough to ensure correct
usage. Use global defines so that we don't have to worry abou this ordering.
Also add a comment in configure about the test.
fa33d97 [walletdb] Add missing LOCK() in Recover() for dummyWallet (MarcoFalke)
fa14d99 [qa] check if wallet or blochchain maintenance changes the balance (MarcoFalke)
fa0765d [qa] Cleanup wallet.py test (MarcoFalke)
This is ugly, but temporary. boost::filesystem will likely be dropped soon
after c++11 is enabled. Otherwise, we could simply roll our own copy_file. I've
fixed this at the buildsystem level for now in order to avoid mixing in
functional changes.
Explanation:
If boost (prior to 1.57) was built without c++11, it emulated scoped enums
using c++98 constructs. Unfortunately, this implementation detail leaked into
the abi. This was fixed in 1.57.
When building against that installed version using c++11, the headers pick up
on the native c++11 scoped enum support and enable it, however it will fail to
link. This can be worked around by disabling c++11 scoped enums if linking will
fail.
Add an autoconf test to determine incompatibility. At build-time, if native
enums are being used (a c++11 build), and force-disabling them causes a
successful link, we can be sure that there's an incompatibility and enable the
work-around.
Don't scan the wallet to see if the current key has been used if we're going to make a new key anyway.
Stop scanning the wallet as soon as we see that the current key has been used.
Don't call isValid() twice on the current key.
CWalletTx::GetAmounts could not find output address for null data transactions, thus issuing an error in debug.log. This change checks to see if the transaction is OP_RETURN before issuing error.
resolves#6142
A further pass over the available inputs has been added to ApproximateBestSubset after a candidate set has been found. It will prune any extraneous inputs in the selected subset, in order to decrease the number of input and the resulting change.
ff723da [Qt] improve minimum absolute fee option - Only display the minimum absolute fee control if CoinControl is enabled (Jonas Schnelli)
31b508a [Qt] make use of the nMinimumTotalFee (absolute) in coincontrols fee calculation (Jonas Schnelli)
80462dd [Qt] use ASYMP_UTF8 (≈) whenever we show a fee that is not absolute (Jonas Schnelli)
ecc7c82 Move fPayAtLeastCustomFee function to CC (Pieter Wuille)
This allows for much finer control of the transaction fees per kilobyte
as it prevent small transactions using a fee that is more appropriate
for one that is of a kilobyte.
This also allows controlling the fee per kilobyte over rpc such that:
bitcoin-cli settxfee `bitcoin-cli estimatefee 2`
would make sense, while currently it grossly fails often by a factor of x3
