A green testnet splashscreen with a normal, orange dock icon looks strange and can confuse users.
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
So we stop getting pull requests (like #2604) fixing problems with disabled Script opcodes.
A hard fork would be required to re-enable these, and if we ever did that we'd require extensive review and testing.
When debugging another issue, I found a hang-during-startup race condition due to
LoadWallet calling SetMinVersion (via LoadCryptedKey).
Writing to the file that you're in the process of reading is a bad idea.
Bitcoin-Qt could core dump if application initialization failed in certain ways.
I double-fixed this:
1) qt/bitcoin.cpp now shuts down core threads cleanly if AppInit2 returns false
2) init.cpp now exits before StartNode() if strErrors is set (no reason to StartNode if we're just going to exit immediately anyway).
Tested by triggering all of the various ways AppInit2 can fail, either by passing bogus command-line arguments or just recompiling tweaked code to simulate failure.
This is a partial fix for #2480
Instead of killing a connection when the receive buffer overflows,
just temporarily halt receiving before that happens. Also, no
matter what, always allow at least one full message in the receive
buffer (otherwise blocks larger than the configured buffer size
would pause indefinitely).
It is possible to have a wallet.dat file without any bestblock
record at all (if created offline, for example), which - when
loaded into a client with a up-to-date chain - does no rescan and
shows no transactions.
Also make sure to write the current best block after a rescan, so
it isn't necessary twice.
* Bugfix: output the correct best block hash (during IBD, it can
differ from the actual current best block)
* Add height to output
* Add hash_serialized, which is a hash of the entire UTXO state.
Can be useful to compare two nodes.
* Add total_amount, the sum of all UTXOs' values.
Previously, JSON-RPC clients accessed URI "/", and the JSON-RPC server
did not care about the URI at all, and would accept any URI as valid.
Change the JSON-RPC server to require URI "/" for all current accesses.
This changes enables the addition of future interfaces at different
URIs, such as pull request #1982 which demonstrates HTTP REST wallet
download.
Or, a future, breaking change in JSON-RPC interface could be introduced
by serving JSON-RPC calls from new URI "/v2/".
This value gets stale really quickly, do not hardcode it into a message.
Completely remove it for now.
Later on, a mechanism will be added to determine fees based on the mempool.
Closes#2576
On black toolbars, the new icon doesn't look very well.
Now the toolbar icon has again a transparent "B" for better style on toolbars.
Does not affect the mac client.
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
why:
- the current splash-screen has no referring to official images on - https://en.bitcoin.it/wiki/Promotional_graphics
- the current splash screen only exists in a low res jpg
- current splash screen looks dark and "hackish"
- new splash screen should generate positive, "trust-emotions".
- new splash screen gives the user infos about the running client.
- new splash screen can handle long messages (in a lot of - languages the text is cropped in current release)
- new size (x2) 400x312
- contains textual information about the client
- textinfos are dynamicly written to the pixmap
when -testnet is switch on, the splashscreen will show the bitcoin logo in testnet-color (as well as a text [testnet])
example: https://dl.dropbox.com/u/7383846/new_bitcoin_splash.png
- this solution works stable on mac and ensures that the window get's reopened when the user clicks the dock icon .
- tested on 10.8 with Qt4.8.4 and Qt5.0.1
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
Having the export button at the top was confusing people into thinking
the entire wallet was exported.
This commit moves the export button to the address book, receiving
addresses and transaction tabs separately.
Every block index entry currently requires a separately-allocated
CBigNum. By replacing them with uint256, it's just 32 bytes extra
in CBlockIndex itself.
This should save us a few megabytes in RAM, and less allocation
overhead.
- updates ClientModel::getBlockSource() to return all available states and
sorts enum BlockSource in order of usage cases (none default, then reindex,
import and network)
- updates BitcoinGUI::setNumBlocks() to better use getBlockSource() and
also adds a message, when we have NO block source available
- continue the mac behavior of clearing button icons (because it's unusual on mac apps)
- fix: new button variable names, new buttons (verifyMessage, signMessage)
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
- redefined the green color
- created new toolbar icons
- updated the assets-attribution.txt
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
This introduces the concept of the 'sync node', which is the one we
asked for missing blocks. In case the sync node goes away, a new one
will be selected.
For now, the heuristic is very simple, but it can easily be extended
later to add better policies.
- added languages in bitcoin.qrc: bs, ca, cy, eo, gu_IN, hi_IN, ja, la,
lv_LV and th_TH (some translations files were already in src/qt/locale
but not added in the .qrc file
- new windows .ico contains multiple resolutions up to 256px
- new testnet (green) icon
- new png icon for llinux, etc.
- new doxygen icon
- changed the assets-attribution.txt
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
- this allows us to use the progressbar and the label independently (if
needed) and still prevents setStatusTip() to use them, if one of the 2
is active
It seems there were two mechanisms for assessing whether a CNode
was still in use: a refcount and a release timestamp. The latter
seems to have been there for a long time, as a safety mechanism.
However, this timer also keeps CNode objects alive for far longer
than necessary after disconnects, potentially opening up a DoS
window.
This commit removes the timestamp-based mechanism, and replaces
it with an assert(nRefCount >= 0), to verify that the refcounting
is indeed correctly working.
As these were not updated when 'backporting' the 225430 checkpoint
into head.
Additionally, also report verification progress in debug.log, and
tweak the sigcheck-verification-speed-factor a bit.
- use labelExplanation for sending and receiving tab and move the string
from the ui-file to the source
- ensure that the table holding the label and address is resized so that
the address column fits the address and the label column is stretched to
fit the window size
- rename some stuff for much easier readbility in the code (I find it hard
to get the meaning of stuff like labels or buttons)
Two reasons for this change:
1. Need to always use boost::thread's sleep, even on Windows, so the
sleeps can be interrupted (prior code used Windows' built-in Sleep).
2. I always forgot what units the old Sleep took.
Create a boost::thread_group object at the qt/bitcoind main-loop level
that will hold pointers to all the main-loop threads.
This will replace the vnThreadsRunning[] array.
For testing, ported the BitcoinMiner threads to use its
own boost::thread_group.
- adds 6 methods in BitcoinGUI to access some actions needed by the new
WalletView class
- updates WalletView class to use these instead of trying to duplicate
these
- cleanup walletview.{cpp/h} and remove all unneeded stuff
- this fixes problems with tabs toolbar (#2451) and export broken (#2436)
- more details in #2447
- added new created and documented svg version of shaded icon
- changed "B" background to white (no longer transparent)
- removed PSD (Adobe Photoshop) document
- license is now MIT
Signed-off-by: Jonas Schnelli <jonas.schnelli@include7.ch>
- as QClipboard::Selection isn't available on Windows ensure that the
correct mode is called, but sill allow selection for e.g. X11
- start conversion from QCoreApplication::instance() to qApp in
guiutil.cpp (I intend to harmonize this all over the source with my Qt5
compatibility pull)
This will result in re-requesting invs if we are under heavy inv
load, however as long as we get no more than 16,000 invs in two
minutes, this should have no effect on runtime behavior.
- the send coins context menu entry was not working anymore, because
a non current version of #2220 was merged onto current master
- also removes some unneeded spaces and adds a comment to
WalletModel::getNumTransactions()
Tabs don't fits in line in Spanish/German/Russian when they has two words.
Wallet has limited functionality. It can send & receive coins. So we can
safely rename "Send coins" to "Send" and "Receive coins" to "Receive".
Address book is just stored addresses.
There exists a per-message-processed send buffer overflow protection,
where processing is halted when the send buffer is larger than the
allowed maximum.
This protection does not apply to individual items, however, and
getdata has the potential for causing large amounts of data to be
sent. In case several hundreds of blocks are requested in one getdata,
the send buffer can easily grow 50 megabytes above the send buffer
limit.
This commit breaks up the processing of getdata requests, remembering
them inside a CNode when too many are requested at once.
- this should prevent GUI issues on Mac that were observed before (disappearing
GUI - see #1522)
- the patch ensures, that createTrayIconMenu() is always called on Mac to
process and use our MacDockIconHandler
* Change CNode::vRecvMsg to be a deque instead of a vector (less copying)
* Make sure to acquire cs_vRecvMsg in CNode::CloseSocketDisconnect (as it
may be called without that lock).
1) "optimistic write": Push each message to kernel socket buffer immediately.
2) If there is write data at select time, that implies send() blocked
during optimistic write. Drain write queue, before receiving
any more messages.
This avoids needlessly queueing received data, if the remote peer
is not themselves receiving data.
Result: write buffer (and thus memory usage) is kept small, DoS
potential is slightly lower, and TCP flow control signalling is
properly utilized.
The kernel will queue data into the socket buffer, then signal the
remote peer to stop sending data, until we resume reading again.
Replaces CNode::vRecv buffer with a vector of CNetMessage's. This simplifies
ProcessMessages() and eliminates several redundant data copies.
Overview:
* socket thread now parses incoming message datastream into
header/data components, as encapsulated by CNetMessage
* socket thread adds each CNetMessage to a vector inside CNode
* message thread (ProcessMessages) iterates through CNode's CNetMessage vector
Message parsing is made more strict:
* Socket is disconnected, if message larger than MAX_SIZE
or if CMessageHeader deserialization fails (latter is impossible?).
Previously, code would simply eat garbage data all day long.
* Socket is disconnected, if we fail to find pchMessageStart.
We do not search through garbage, to find pchMessageStart. Each
message must begin precisely after the last message ends.
ProcessMessages() always processes a complete message, and is more efficient:
* buffer is always precisely sized, using CDataStream::resize(),
rather than progressively sized in 64k chunks. More efficient
for large messages like "block".
* whole-buffer memory copy eliminated (vRecv -> vMsg)
* other buffer-shifting memory copies eliminated (vRecv.insert, vRecv.erase)
-dbcache was originally used to set the maximum buffer size in the
BDB environment, and was later changed to set the chainstate cache
and leveldb caches. No need to use it for BDB now that only the
wallet remains there.
This should reduce memory allocation (but not necessarily memory
usage) a bit.
Step for buttons 'up' and 'down' - 0.001. With BTC and mBTC all ok, but
0.001 uBTC is lower than minimal value (satoshi)
User should press 10 times on 'up' button to get 0.01 uBTC
- allows to directly select an address from the addressbook, chose "send
coins" from the context menu, which sends you to sendcoins tab and fills
in the selected address
- try to enforce the same style to all Qt related files
- remove unneeded includes from the files
- add missing Q_OBJECT, QT_BEGIN_NAMESPACE / QT_END_NAMESPACE
- prepares for a pull-req to include Qt5 compatibility
- remove an unneeded MODAL flag, as MSG_ERROR sets MODAL
- re-order an if-clause in main to have bool checks before a function call
- fix some log messages that used wrong function names
- make a log message use a correct ellipsis
- remove some unneded spaces, brackets and line-breaks
- fix style for adding files in the Qt project
This fixes test_bitcoin failures on openbsd reported by dhill on IRC.
On some systems rand() is a simple LCG over 2^31 and so it produces
an even-odd sequence. ApproximateBestSubset was only using the least
significant bit and so every run of the iterative solver would be the
same for some inputs, resulting in some pretty dumb decisions.
Using something other than the least significant bit would paper over
the issue but who knows what other way a system's rand() might get us
here. Instead we use an internal RNG with a period of something like
2^60 which is well behaved. This also makes it possible to make the
selection deterministic for the tests, if we wanted to implement that.
Switch to using Qt's QLocalServer/QLocalSocket to handle bitcoin
payment links (bitcoin:... URIs)
Reason for switch: the boost::interprocess mechanism seemed flaky,
and doesn't mesh as well with "The Qt Way"
qtipcserver.cpp/h is replaced by paymentserver.cpp/h
Click-to-pay now also works on OSX, with a custom Info.plist
that registers Bitcoin-Qt as a handler for bitcoin: URLs and
an event listener on the main QApplication that handles
QFileOpenEvents (Qt translates 'url clicked' AppleEvents into
QFileOpenEvents automagically).
Extremely large transactions with lots of inputs can cost the network
almost as much to process as they cost the sender in fees.
We would never create transactions larger than 100K big; this change
makes transactions larger than 100K non-standard, so they are not
relayed/mined by default. This is most important for miners that might
create blocks larger than 250K big, who could be vulnerable to a
make-your-blocks-so-expensive-to-verify-they-get-orphaned attack.
Two changes:
Use IsConfirmed() instead of IsFinal(), so 'getbalance "*" 0' uses the same
'is this output spendable' criteria as 'getbalance'. Fixes issue #172.
And a tiny refactor to CWallet::GetBalance() (redundant call to IsFinal -- IsConfirmed
calls IsFinal).
getbalance with no arguments and 'getbalance "*" 0' could return different different results,
- this change allows us to keep the translation without the need to
re-translate any string, when we update the copyright year
- copyright symbol is changed to HTML to ensure we get no encoding
issues and it's removed from the translation string so translators don't
break it by mistake
Version numbers changed from 0.7.99 to 0.8.0
Set CLIENT_VERSION_IS_RELEASE to remove pre-release warning
Updated copyright in COPYING and doc/READMEs to 2013
Updated doc/release-notes.txt
At least one service that accepted zero-confirmation transactions
was vulnerable because an attacker could send a transaction
with a lock time far in the future, and then have plenty of time in
which to get a double-spend mined (perhaps from a miner who wasn't
on the network when the first transaction was broadcast).
That is a variation on the "Finney attack". We still don't
recommend anybody accept 0-confirmation transactions as final
payment for anything. This change keeps non-final transactions
from appearing in the wallet, and, assuming most of the network
accepts this change, will prevent them from being relayed until
they are final.
* Pass txid's to CCoinsView functions by reference instead of by value
* Add a method to swap CCoins, and use it in some places to avoid a
allocating copy + destruct.
* Optimize CCoinsViewCache::FetchCoins to do only a single search
through the backing map.
- don't show QR Code context menu, when USE_QRCODE=1 was not specified
when compiling the client
- re-work on_showQRCode_clicked() for better readability and remove an
unneeded duplicate check
- re-work on_signMessage_clicked() and on_verifyMessage_clicked() to match
foreach in on_showQRCode_clicked(), which seems more robust / cleaner
- re-order context menu stuff to match real context menu layout
- add comments for all private slots in the class
Several changes to make the native windows leveldb code compile
with mingw32 and run on 32-bit Windows:
* Remove -std=c++0x dependency (modified code to use NULL instead of
nullptr)
* Link with -lshlwapi
* Only #define snprintf/etc if compiling with Visual Studio
* Do not link against DbgHelp.lib (wrote a CreateDir instead of using
DbgHelp's MakeSureDirectoryPathExists
* Define WINVER=0x0500 so MinGW32 can use the 64-bit-filesystem Windows
api calls
* Define __USE_MINGW_ANSI_STDIO=1 to use MinGW's printf (which supports
%ll)
I also cleaned up makefile.mingw, assuming that dependencies would be in
the standard /usr/local/{include,lib} by default but allowing overriding
with make DEPSDIR=... etc
This actually simplifies some SPV code, as they can keep track of
a filtered block and its txn before accepting both in one step.
The previous argument was that SPV nodes should handle the txn the
same as any other free txn and then mark them as connected to a
block when they get the filtered block itself. However, it now
appears that SPV nodes will need to put in more effort to verify
loose txn than they would to verify txn in blocks, thus making it
more approriate to send the txn after the filtered block.
By specifying -txindex when initializing the database, a txid-to-diskpos
index is maintained in the blktree database. This database is used to
help answering getrawtransaction() RPC queries, when enabled.
Changing the -txindex value requires a -reindex; the client will abort
at startup if the database and the specified -txindex mismatch.
- this flag allows bitcoin-qt.exe / bitcoind.exe (32-bit application) to
handle addresses larger than 2GB (up to 3GB on x86 Windows and up to
4GB on x64 Windows)
Note that the default value for fRelayTxes is false, meaning we
now no longer relay tx inv messages before receiving the remote
peer's version message.
Fixes issue #2178 : attacker could penny-flood with invalid-signature
transactions to deduce which addresses belonged to your node.
I'm committing this early for code review; I still need to write up
a test plan.
Executive summary of fix: check all transactions received from the network
for penny-flood rate-limiting before adding to the memory pool. But do NOT
ratelimit transactions added to the memory pool:
- because of blockchain reorgs
- stored in the wallet and added at startup
- sent from the GUI or one of the send* RPC commands (CWallet::CommitTransaction)
The limit-free-transactions code really should be a method on CNode, with
counters per-peer. But that is a bigger change for another day.
- it was bad, that quite some messages were just talking about a database,
I think a user should know, if we are talking about wallet db or
block/coin db
- also adds a new init message for "Verifying block database integrity..."
- this pull adds an InitMessage() function to noui.cpp, which outputs init
messages to debug.log (this allows to remove some printf() calls from
init.cpp)
- change InitMessage() in bitcoin.cpp to also write init messages to
debug.log to ensure nothting is missing in the log because of the
removal of printf() calls in init.cpp
Client (SPV) mode never got implemented entirely, and whatever part was already
working, is likely not been tested (or even executed at all) for the past two
years. This removes it entirely.
If we want an SPV implementation, I think we should first get the block chain
data structures to be encapsulated in a class implementing a standard interface,
and then writing an alternate implementation with SPV semantics.
- add qSort() for cachedAddressTable, as qLowerBound() and qUpperBound()
require the list to be in ascending order (see
http://harmattan-dev.nokia.com/docs/library/html/qt4/qtalgorithms.html#qLowerBound)
- add a new check in AddressTableModel::setData() to just return, when no
changes were made to a label or an address (prevents entry duplication
issue)
- remove "rec->label = value.toString();" from
AddressTableModel::setData() as the label gets updated by
AddressTablePriv::updateEntry() anyway (seems @sipa added this line via
1025440184 (L6R225))
- add another new check in AddressTableModel::setData() to just return, if
a duplicate address was found (prevents address overwrite)
- add a new check to EditAddressDialog::setModel() to prevent setting an
invalid model
- re-work the switch-case statement in AddressTableModel::accept() to
always break (as return get's called anyway) and order the list to match
the enum definition
- make accept() in editaddressdialog.h a public slot, which it should be
- misc small coding style changes
Previously when a transaction was set to lock at a specific block the
calculation was reversed, returning a negative number. This broke the UI
and caused it to display %n in place of the actual number.
In addition the previous calculation would display "Open for 0 blocks"
when the block height was such that the next block created would
finalize the transaction. Inserted the word "more" and changed the
calculation so that the last message would be "Open for 1 more block" to
better match user expectations.
Since block validation happens in parallel, multiple threads may be
accessing the signature cache simultaneously. To prevent contention:
* Turn the signature cache lock into a shared mutex
* Make reading from the cache only acquire a shared lock
* Let block validations not store their results in the cache
* During block verification (when parallelism is requested), script
check actions are stored instead of being executed immediately.
* After every processed transactions, its signature actions are
pushed to a CScriptCheckQueue, which maintains a queue and some
synchronization mechanism.
* Two or more threads (if enabled) start processing elements from
this queue,
* When the block connection code is finished processing transactions,
it joins the worker pool until the queue is empty.
As cs_main is held the entire time, and all verification must be
finished before the block continues processing, this does not reach
the best possible performance. It is a less drastic change than
some more advanced mechanisms (like doing verification out-of-band
entirely, and rolling back blocks when a failure is detected).
The -par=N flag controls the number of threads (1-16). 0 means auto,
and is the default.
- ensure we use strCaption for printf and fprintf, as before it could
happen to have an error message in the debug.log, which had no "Error"
(or whatever) in front
- this prevents an interference with the IPC message queue (which is used
for URI processing) when running a testnet and mainnet instance in
parallel
- to check for testnet, I had to raise the ParseParameters() call in
main() to the topmost position
- a click on "Reset Options" sets all options to the default values by
removing all stored settings (QSettings), loading the defaults and
saving them as the new settings
- before the reset is executed the user is presented a confirmation dialog
- special casing was needed for StartAtStartup
- some users reported it as weird, that the estimated block count could be
lower than our own nodes block number (which is indeed true and not good)
- this pull adds a new default behaviour, which displays our own block
number as estimated block number, if own >= est. block count
- the pull raises space for nodes block counts in cPeerBlockCounts to 8 to
be more accurate
- also removes a reduntant setNumBlocks() call in RPCConsole and moves
initialisation of numBlocksAtStartup in ClientModel, where it belongs
-checklevel gets a new meaning:
0: verify blocks can be read from disk (like before)
1: verify (contextless) block validity (like before)
2: verify undo files can be read and have good checksums
3: verify coin database is consistent with the last few blocks
(close to level 6 before)
4: verify all validity rules of the last few blocks
Level 3 is the new default, as it's reasonably fast. As level 3 and
4 are implemented using an in-memory rollback of the database, they
are limited to as many blocks as possible without exceeding the
limits set by -dbcache. The default of -dbcache=25 allows for some
150-200 blocks to be rolled back.
In case an error is found, the application quits with a message
instructing the user to restart with -reindex. Better instructions,
and automatic recovery (when possible) or automatic reindexing are
left as future work.
Initialize the OutputDebugStringF mutex and file pointer using
boost::call_once, to be thread-safe.
Make the return value of OutputDebugStringF really be the number of
characters written (*printf() semantics).
Declare the fReopenDebugLog flag volatile, since it is changed from
a signal handler.
And don't declare OutputDebugStringF() as inline.
If the user was really after the fastest possible confirmation times
they would be manually setting a fee. In cases where the wallet builds
a transaction with a priority that is too low to qualify as free until
the next block, go ahead without a fee. Confirmation frequently takes
multiple blocks even when a minimum fee is provided.
This avoids a potential crash when trying to read the scrippubkeys on
transactions where the first input IsMine but some of the rest are not
when running listaddressgroupings.
When the coin database is out of date with the block database, the
best block in it is automatically switched to. This reconnection
process can take time, so allow it to be interrupted.
This also stops block connection as soon as shutdown is requested,
leading to a faster shutdown.
This problem is like earth (mostly harmless). After/during a
-reindex, it means the statistics about the last block file
reported in debug.log are always of blk00000.dat instead of the
last file. Apart from that, it means a few more database entries
need to be read when finding a file to append to the first time.
- even if we are allowed to fail pre-allocating, it's better to check
for sufficient space before calling AllocateFileRange() and if we
are out of disk space return with error()
- the above change allows us to remove the CheckDiskSpace() check
in CBlock::AcceptBlock()
- use it for displaying URI parsing warnings
- use it for displaying error and information in backup wallet function
(the information display is new and the error was a warning before)
- cleanup BitcoinGUI::incomingTransaction()
-- use message() + the information icon from message
-- comment out an unused parameter in the function definition and
declaration
-- move all pre-checks at the beginning of the function
In case a reorganisation fails, the internal state could become
inconsistent (memory only). Previously, a cache per block connect
or disconnect action was used, so blocks could not be applied in
a partial way. Extend this to a cache for the entire reorganisation,
making it atomic entirely. This also simplifies the code a bit.
- this allows to setup the trayicon before we have and want a trayicon menu
- should be of great use, when we remove that splash screen
- fixes a small bug with the toggleHideAction icon, which is not only used with
trayicon but also with the Mac dock
- fix ThreadSafeMessageBox always displays error icon
- allow to specify MSG_ERROR / MSG_WARNING or MSG_INFORMATION without a
custom caption / title
- allow to specify CClientUIInterface::ICON_ERROR / ICON_WARNING and
ICON_INFORMATION (which is default) as message box icon
- remove CClientUIInterface::OK from ThreadSafeMessageBox-calls, as
the OK button will be set as default, if none is specified
- prepend "Bitcoin - " to used captions
- rename BitcoinGUI::error() -> BitcoinGUI::message() and add function
documentation
- change all style parameters and enum flags to unsigned
- update code to use that new API
- update Client- and WalletModel to use new BitcoinGUI::message() and
rename the classes error() method into message()
- include the possibility to supply the wanted icon for messages from
Client- and WalletModel via "style" parameter
When a transaction A is in the memory pool, while a transaction B
(which shares an input with A) gets accepted into a block, A was
kept forever in the memory pool.
This commit adds a CTxMemPool::removeConflicts method, which
removes transactions that conflict with a given transaction, and
all their children.
This results in less transactions in the memory pool, and faster
construction of new blocks.
- can be triggerd by just adding -proxy=crashme with 0.7.1
- crash occured, when AppInit2() was left with return false; after the
first call to bitdb.open() (Step 6 in init)
- this is caused by GetDataDir() or .string() in CDBEnv::EnvShutdown()
called via the bitdb global destructor
- init fDbEnvInit and fMockDb to false in CDBEnv::CDBEnv()
These flags select features to be enabled/disabled during script
evaluation/checking, instead of several booleans passed along.
Currently these flags are defined:
* SCRIPT_VERIFY_P2SH: enable BIP16-style subscript evaluation
* SCRIPT_VERIFY_STRICTENC: enforce strict adherence to pubkey/sig encoding standards.
o Remove unused Leave and GetLock functions
o Make Enter and TryEnter private.
o Simplify Enter and TryEnter.
boost::unique_lock doesn't really know whether the
mutex it wraps is locked or not when the defer_lock
option is used.
The boost::recursive_mutex does not expose this
information, so unique_lock only infers this
knowledge. When taking the lock is defered, it
(randomly) assumes that the lock is not taken.
boost::unique_lock has the following definition:
unique_lock(Mutex& m_,defer_lock_t):
m(&m_),is_locked(false)
{}
bool owns_lock() const
{
return is_locked;
}
Thus it is a mistake to check owns_lock() in Enter
and TryEnter - they will always return false.
- remove an unwanted ";" at the end of the ~CCoinsView() destructor
- in FindBlockPos() and FindUndoPos() only call fclose(), is file is open
- fix an error string in the CBlockUndo class
feature in clang. These macros should primarily be used to
document which locks protect a given piece of data. Secondary it
can be used to document the set of held and excluded locks when
entering a function.
- remove pathEnv from CDBEnv, as this attribute is not needed
- change path parameter in ::Open() to a reference
- make nDbCache variable an unsigned integer
- remove a missplaced ";" behin ::IsMock()
- this allows the client to listen on via -bind specified addresses
(e.g. 127.0.0.1), even when a network (IPv4 in that case) was blocked
via e.g -onlynet="Tor"
- introduce enum BindFlags to avoid passing multiple bools to Bind()
- make -bind help text clear we ALWAYS listen on the specified address
- remove an unused variable
- remove 2 unneeded IsLimited() checks before calling Bind(), which does
these checks anyway
- usage case: specify -bind=127.0.0.1 -onlynet="Tor" to allow incoming
connections to a Tor hidden service, but still don't allow other IPv4
nodes to connect / get connected
As memset() can be optimized out by a compiler it should not be used in
privacy/security relevant code parts. OpenSSL provides the safe
OPENSSL_cleanse() function in crypto.h, which perfectly does the job of
clean and overwrite data.
For details see: http://www.viva64.com/en/b/0178/
- change memset() to OPENSSL_cleanse() where appropriate
- change a hard-coded number from netbase.cpp into a sizeof()
Flushes the blktree/ and coins/ databases, and reindexes the
block chain files, as if their contents was loaded via -loadblock.
Based on earlier work by Jeff Garzik.
- ensure header inclusion guard is named after the header file
- add missing comments at the end of some inclusion guards
- add a small Qt5 compatibility fix in macdockiconhandler.h
rather than reusing ReadHTTPStatus() from the client mode.
The following additional HTTP request validations are added, both in line with
existing HTTP client practice:
1) HTTP method must be GET or POST. Most clients use POST, some
use GET. Either way, this continues to work.
2) HTTP URI must start with "/" character.
Normal URI is "/" (a 1-char string), so this is fine.
ReadHTTPStatus() is currently overloaded: In client mode, it properly parses
and receives an HTTP status line. In server mode, it incorrectly parses the
HTTP request line as an HTTP status line.
This server mode bug has never mattered, because the RPC server never
cared about the URI (path) provided in the HTTP request. That will change in
the future, so go ahead and begin fixing the problem.
This patch is cosmetic, and should result in NO behavior changes.
Further renames:
ReadHTTPHeader -> ReadHTTPHeaders
ReadHTTP -> ReadHTTPMessage
The original test (checking whether the transaction occurs in the
txindex) is not usable anymore, as it will miss anything already
fully spent. However, as merkle transactions (and by extension,
wallet transactions) track which block they were last seen being
included in, we can use that to determine the need for
rebroadcasting.
- add setStatusTip() in addition to setTooltip() where it makes sense
- add only setStatusTip() if GUI element is only used in main- or tray menu
- add an event filter on our BitcoinGUI object to prevent garbelled text
on the status bar, which happens when we use it for e.g. displaying
block-sync state and then a QEvent::StatusTip wants to write own text to it
- remove a double translation of "Bitcoin client"
This is to support the signrawtransaction API call; given the public
keys involved in a multisig transaction, this gives back the redeemScript
needed to sign it.
signrawtransaction was unable to sign pay-to-script-hash inputs
when given the list of private keys to use. With this commit
you can provide the p2sh redemption script in the list of
inputs.
As the coinset data refers to the best block, stored in the block
tree. Flushing the coin set first can cause inconsistencies if
the process gets killed in between.
- "ThreadIRCSeed started" was not displayed, even if the thread ran
(although only for a short time as the "do we want this thread?"-checks
happen IN ThreadIRCSeed2())
- the patch ensures we always get that message
- add a "ThreadIRCSeed trying to connect..." message
- add missing "ThreadDumpAddress started" message
- instead of "return false;" use "return QDialog::eventFilter(object,
event);" to harmonize this event filter with our default behaviour
- remove orphan spaces found while editting the files
Implements #1948
- Add macro `CLIENT_VERSION_IS_RELEASE` to clientversion.h
- When running a prerelease (the above macro is `false`):
- In UI, show an orange warning bar at the top. This will be used for other
warnings (and alerts) as well, instead of the status bar.
- For `bitcoind`, show the warning in the "errors" field in `getinfo`
response.
CreateNewBlock was reading pindexBest at the start before taking the lock
so it was possible to have the the block content not match the prevheader
and this can also trigger a newly added assert in ConnectBlock.
I noticed this during a code review after twobitcoins reported that ab91bf39
(BIP30 for all blocks) could cause a null dereference on a modified node
that mined during the IBD, or on testnet when it reached heights 91842 and
91880 due to CreateNewBlock calling ConnectBlock with pindex->phashBlock NULL.
- remove uiInterface.InitMessage() calls from ThreadImport(), as Qt
doesn't like them getting called out of it's main thread and because the
thread will continue to run after the GUI was loaded
With a change of libs, and specifying NATIVE_WINDOWS as TARGET_OS it should compile libleveldb.a and libmemenv.a just fine, it did for me and Diapolo when testing.
Split off CBlockTreeDB and CCoinsViewDB into txdb-*.{cpp,h} files,
implemented by either LevelDB or BDB.
Based on code from earlier commits by Mike Hearn in his leveldb
branch.
Given that the block tree database (chain.dat) and the active chain
database (coins.dat) are entirely separate now, it becomes legal to
swap one with another instance without affecting the other.
This commit introduces a check in the startup code that detects the
presence of a better chain in chain.dat that has not been activated
yet, and does so efficiently (in batch, while reusing the blk???.dat
files).
To prevent excessive copying of CCoins in and out of the CCoinsView
implementations, introduce a GetCoins() function in CCoinsViewCache
with returns a direct reference. The block validation and connection
logic is updated to require caching CCoinsViews, and exploits the
GetCoins() function heavily.
Use CBlock's vMerkleTree to cache transaction hashes, and pass them
along as argument in more function calls. During initial block download,
this results in every transaction's hash to be only computed once.
During the initial block download (or -loadblock), delay connection
of new blocks a bit, and perform them in a single action. This reduces
the load on the database engine, as subsequent blocks often update an
earlier block's transaction already.
This switches bitcoin's transaction/block verification logic to use a
"coin database", which contains all unredeemed transaction output scripts,
amounts and heights.
The name ultraprune comes from the fact that instead of a full transaction
index, we only (need to) keep an index with unspent outputs. For now, the
blocks themselves are kept as usual, although they are only necessary for
serving, rescanning and reorganizing.
The basic datastructures are CCoins (representing the coins of a single
transaction), and CCoinsView (representing a state of the coins database).
There are several implementations for CCoinsView. A dummy, one backed by
the coins database (coins.dat), one backed by the memory pool, and one
that adds a cache on top of it. FetchInputs, ConnectInputs, ConnectBlock,
DisconnectBlock, ... now operate on a generic CCoinsView.
The block switching logic now builds a single cached CCoinsView with
changes to be committed to the database before any changes are made.
This means no uncommitted changes are ever read from the database, and
should ease the transition to another database layer which does not
support transactions (but does support atomic writes), like LevelDB.
For the getrawtransaction() RPC call, access to a txid-to-disk index
would be preferable. As this index is not necessary or even useful
for any other part of the implementation, it is not provided. Instead,
getrawtransaction() uses the coin database to find the block height,
and then scans that block to find the requested transaction. This is
slow, but should suffice for debug purposes.
Introduce a AllocateFileRange() function in util, which wipes or
at least allocates a given range of a file. It can be overriden
by more efficient OS-dependent versions if necessary.
Block and undo files are now allocated in chunks of 16 and 1 MiB,
respectively.
Change the block storage layer again, this time with multiple files
per block, but tracked by txindex.dat database entries. The file
format is exactly the same as the earlier blk00001.dat, but with
smaller files (128 MiB for now).
The database entries track how many bytes each block file already
uses, how many blocks are in it, which range of heights is present
and which range of dates.
The CTxUndo class encapsulates data necessary to undo the effects of
a transaction on the txout set, namely the previous outputs consumed
by it (script + amount), and potentially transaction meta-data when
it is spent entirely.
The CCoins class represents a pruned set of transaction outputs from
a given transaction. It only retains information about its height in
the block chain, whether it was a coinbase transaction, and its
unspent outputs (script + amount).
It has a custom serializer that has very low redundancy.
Special serializer/deserializer for amount values. It is optimized for
values which have few non-zero digits in decimal representation. Most
amounts currently in the txout set take only 1 or 2 bytes to
represent.
Special serializers for script which detect common cases and encode
them much more efficiently. 3 special cases are defined:
* Pay to pubkey hash (encoded as 21 bytes)
* Pay to script hash (encoded as 21 bytes)
* Pay to pubkey starting with 0x02, 0x03 or 0x04 (encoded as 33 bytes)
Other scripts up to 121 bytes require 1 byte + script length. Above
that, scripts up to 16505 bytes require 2 bytes + script length.
Variable-length integers: bytes are a MSB base-128 encoding of the number.
The high bit in each byte signifies whether another digit follows. To make
the encoding is one-to-one, one is subtracted from all but the last digit.
Thus, the byte sequence a[] with length len, where all but the last byte
has bit 128 set, encodes the number:
(a[len-1] & 0x7F) + sum(i=1..len-1, 128^i*((a[len-i-1] & 0x7F)+1))
Properties:
* Very small (0-127: 1 byte, 128-16511: 2 bytes, 16512-2113663: 3 bytes)
* Every integer has exactly one encoding
* Encoding does not depend on size of original integer type
This reverts commit 199d88cf90, reversing
changes made to 65bc1573e7.
License is worse instead of better. Will only accept public domain and
MIT-licensed icons from now on.
Corrupt wallets used to cause a DB_RUNRECOVERY uncaught exception and a
crash. This commit does three things:
1) Runs a BDB verify early in the startup process, and if there is a
low-level problem with the database:
+ Moves the bad wallet.dat to wallet.timestamp.bak
+ Runs a 'salvage' operation to get key/value pairs, and
writes them to a new wallet.dat
+ Continues with startup.
2) Much more tolerant of serialization errors. All errors in deserialization
are reported by tolerated EXCEPT for errors related to reading keypairs
or master key records-- those are reported and then shut down, so the user
can get help (or recover from a backup).
3) Adds a new -salvagewallet option, which:
+ Moves the wallet.dat to wallet.timestamp.bak
+ extracts ONLY keypairs and master keys into a new wallet.dat
+ soft-sets -rescan, to recreate transaction history
This was tested by randomly corrupting testnet wallets using a little
python script I wrote (https://gist.github.com/3812689)
Before, opening a -datadir that was created with a new
version of Berkeley DB would result in an un-caught DB_RUNRECOVERY
exception.
After these changes, the error is caught and the user is told
that there is a problem and is told how to try to recover from
it.
Before, opening a -datadir that was created with a new
version of Berkeley DB would result in an un-caught DB_RUNRECOVERY
exception.
After these changes, the error is caught and the user is told
that there is a problem and is told how to try to recover from
it.
- don't rely on the QSettings for cases ProxyUse and ProxySocksVersion and
query the real values via the GetProxy() call
- add a missing "succesful =" for case ProxyUse in ::setData()
I2P apparently needs 256 bits to store a fully routable address. Garlicat
requires a centralized lookup service to map the 80-bit addresses to fully
routable ones (as far as I understood), so that's not really usable in our
situation.
To support I2P routing and peer exchange for it, another solution is needed.
This will most likely imply a network protocol change, and extension of the
'addr' message.
- fix#1560 by properly locking proxy related data-structures
- update GetProxy() and introduce GetNameProxy() to be able to use a
thread-safe local copy from proxyInfo and nameproxyInfo
- update usage of GetProxy() all over the source to match the new
behaviour, as it now fills a full proxyType object
- rename GetNameProxy() into HaveNameProxy() to be more clear
This allows fun stuff such as `bitcoin --help | less`, and more
easy piping to files.
Looking at other tools such as bash, gcc, they all send their help
text to stdout.
These command are a leftover from send-to-IP transactions, which have been
removed a long time ago.
Also removes CNode::mapRequests and CNode::PushRequests, as these were
only used for the mentioned commands.
As the code was before, toHTML added empty elements to mapValue to check for their existance. Now first it check for their existance and then for their non-emptiness.
Removed a duplicated identical if
There are two equal ifs, one inside another. If the first one is true, then the second one is true.
Due to a bug in the implementation of MakeSameSize(), using OP_AND, OP_OR, or OP_XOR with signed values of unequal size will result in the sign-value becoming part of the smaller integer, with nonsensical results. This patch documents the unexpected behavior and provides the basis of a solution should decision be made to fix the bug in the future.
-detachdb option. Useful for upgrading, for example. Lets you use fast stops usually, but force a detach when needed. Also, allows
you to do a fast stop in a system normally configured for fast stops.
- I checked every occurance of strprintf() in the code and used %u, where
unsigned vars are used
- the change to GetByte() was made, as ip is an unsigned char
Matt pointed out some time ago that there existed a minor DOS
attack where a node in its initial block download could be wedged
by an overwrite attack in a fork created between checkpoints before
a time where BIP30 was enforced. Now that the BIP30 timestamp
is irreversibly past the check can be more aggressive and apply to
all blocks except the two historic violations.
- Paging using PageUp / PageDown now works when entry widget has focus
- Typing or pasting while the messages widget has focus auto-selects entry widget
We're in a wholly different world now, C++-compiler-wise.
Current std::stringstream implementations don't have the stated problem anymore,
and are just as fast as CDataStream.
The #ifdef'd block does not even compile anymore; CDataStream constructor changed,
and missing some std::. Also timing in whole seconds is also way too granular
to say anything sensible in such microbenchmarks. Just remove it,
it can always be found again in git history.
Bugfix: Correct doubled-up &amp; in translations
Bugfix: Remove extra spaces after ampersand in translations (this fixes hotkeys)
Restore copyright translations, now split up
Restore old translations lost due to changes to English structure
Skipped: ca_ES et eu_ES fr_CA (under 10% coverage)
- add version information to bitcoin-qt.rc, which is displayed on Windows, when looking in the executable properties and selecting "Details"
- introduce a new clientversion.h (used in bitcoin-qt.rc to generate
version information), which takes only the version defines from
version.h and is included in it (to allow usage with the windres rc-file
compiler)
- move #define STRINGIFY(s) #s into clientversion.h as that is used in
bitcoin-qt.rc and rename to DO_STRINGIZE(X)
- add #define STRINGIZE(X) DO_STRINGIZE(X), which is needed to convert the
version defines into a version string in the rc-file
- this ensures we only need to update 1 file and have bitcoin-qt.exe
version information
- for RC-file documentation see:
http://msdn.microsoft.com/en-us/library/windows/desktop/aa381058%28v=vs.85%29.aspx
OrderedTxItems returns a multimap of pointers, but needs a place to store the actual CAccountingEntries it points to.
It had been using a stack item, which was clobbered as soon as it returned, resulting in undefined behaviour.
This fixes at least bug #1768.
Try to display a nicer message instead of dumping raw JSON object when possible. If the error
somehow doesn't have the required 'code' and 'message' fields, fall back to printing raw JSON object.
- re-order Qt Actions and connect() calls to match the real GUI layout,
which makes things easier to read and understand
- remove signMessageAction and verifyMessageAction from tabGroup as we
didn't use them anyway (as tooltips are not displayed in the menu remove
these too)
- update 2 comments
- be clear we don't "Show/Hide Bitcoins", but just the client window
- remove the tooltip for toggleHideAction as this is not shown anyway
- update a comment to be more general
If our IRC nick is in use (because some other node thinks it has
the same address we think we have) don't fruitlessly try to reconnect
using that name forever. After three tries, give up and use a random
nick. Either we'll learn a new local address from IRC and switch
to that, or it was right and the other guy is advertising for us.
This avoids a pessimal case where a second testnet node behind
a nat is unable to get any peers because he can't get on IRC.
Previously Bitcoin would refuse to use IRC if it was either not
accepting inbound connections or not making outbound. Instead this
changes it to not use IRC only if it's not doing either or if
IPv4 is off completely. If Bitcoin is not listening this will use
the default random nicks rather than the IP based ones.
Hard-code a special nId=max int alert, to be broadcast if the
alert key is ever compromised. It applies to all versions, never
expires, cancels all previous alerts, and has a fixed message:
URGENT: Alert key compromised, upgrade required
Variations are not allowed (ignored), so an attacker with
the private key cannot broadcast empty-message nId=max alerts.
This fixes two alert system vulnerabilities found by
Sergio Lerner; you could send peers unlimited numbers
of invalid alert message to try to either fill up their
debug.log with messages and/or keep their CPU busy
checking signatures.
Fixed by disconnecting/banning peers if they send 10 or more
bad (invalid/expired/cancelled) alerts.
