8284756705 A few minor formatting fixes and clarifications to descriptors.md (John Newbery)
Pull request description:
Fixes some markdown formatting issues, and also adds a few clarifications.
Tree-SHA512: b12fc94035c075a990756e22fb60b95e6c851c80c8a60fc8fc46b07c6749df4d257401889be4d930996432ac08850770077e667fe48473140f38b94c8e9eacdc
86cddf0856 doc: add detached release notes for #14060 (mruddy)
Pull request description:
Adding detached release notes for #14060 in order to assist with https://github.com/bitcoin/bitcoin/pull/14688.
Tree-SHA512: 170cd0b6ac27237f58875f301132e0695dee36eec5d90a0c1234c0fa9db125151e6cebd94e63e634ddc4ddcfb77d7a4a07434ffd3725cb0dfa13fc4ccfbde2a0
ba8f0c6c8d Release notes: integrate detached release notes (David A. Harding)
6062f0e613 Release notes: update notes through to 11e1ac3ae0 (David A. Harding)
Pull request description:
This documents changes listed by `git log v0.17.0...11e1ac3 --merges` and integrates the existing detached release notes into the main file.
My goal is to update the release notes each month in order to reduce the amount of writing and review that needs to be done all at once near the start of the RC cycle.
Note: I've chosen to use fully-qualified URLs for linking to documentation, rather than shorter relative URLs that would otherwise be preferred, as the release notes are commonly copied into emails, reddit threads, and blog posts where relative URLs would be incomplete or would point to the wrong page.
Tree-SHA512: a943327d48e166f4a188ab0f468972609276e9c8f0ed85513823511ed989606445bf6b0ae9dd693b5d1e13d2f98c13573acd13865c57fe9c8ee9dbd04ceeff7f
a6b5ec18f rpc: creates possibility to preserve labels on importprivkey (marcoagner)
Pull request description:
Closes#13087.
As discussed in the issue, this is a feature request instead of a bug report since the behaviour was as intended (i.e. label with default: `''`). With this, the old behaviour is kept while the possibility to achieve the preservation of labels, as expected in the open issue, is added.
Tree-SHA512: b33be50e1e7f62f7ddfae953177ba0926e2d848961f9fac7501c2b513322c0cb95787745d07d137488267bad1104ecfdbe800c6747f94162eb07c976835c1386
a4edb168b6 ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
33ae985912 doc: Update OpenBSD build guide for 6.4 (fanquake)
6d247b1148 gitignore contents of db4 folder (Marty Jones)
Pull request description:
Includes a commit from #14314.
The `disable-dependency-tracking ` workaround is still required to run `./configure` (cc #14404).
`gmake check -j4` pass.
`src/bitcoind` runs and "starts" syncing.
Tree-SHA512: 72d78eb0d94fc4f2bbcf901d867f10f0e85d8a4f43969c598953278343ed826a26d1ebe6772dcc0fbd1fc608e88b7c86e31656232c1efb0656c537176fb9de4c
14a06525b2 tests: add test for 'getaddressinfo' RPC result 'ischange' field (whythat)
93d1aa9abc rpcwallet: add 'ischange' field to 'getaddressinfo' response (whythat)
Pull request description:
Implementation of proposal in #14396.
This introduces `CWallet::IsChange(CScript&)` method and replaces original `CWallet::IsChange(CTxOut&)` method with overloaded version that delegates to the new method with *txout*'s `scriptPubKey`. In this way `TODO` note from the original method can still be addressed in a single place.
Tree-SHA512: ef5dbc82d76b4b9b2fa6a70abc3385a677c55021f79e187ee2f392ee32bc6b406191f4129acae5c17b0206e72b6712e7e0cad574a4bbd966871c2e656c45e041
9605bbd315 Make clear function argument case in dev notes (Carl Dong)
Pull request description:
Rationale:
For new developers, they might be confused if they see that function arguments are sometimes `camelCase`'d in the codebase. This makes it clear that they _should_ be `snake_case`'d (maybe because no one's gotten to fixing them yet).
Tree-SHA512: 9db16d1fedf9761121844a0865ae3fefea94b5dbdfb36cb18f99cbc73e117f7d798a019f28a1c8bca19772502de2f9ed063f03bd911ffc4d248ec7386cd87d97
0a04667613 FreeBSD: Document Python 3 requirement for 'gmake check' (Murray Nesbitt)
Pull request description:
`doc/build-freebsd.md` doesn't mention that Python 3 is required to run the test suite. Currently, `gmake check` fails without it.
Tree-SHA512: 19117671bf528d335146d821e5cd4108f2f6ae014fb9a6d0030a322b23d1bc5f677e46896b575a7ca78b137315b60e63ad8b03ad695fe0aae3e9f50b060a3561
c11875c590 Add segwit address tests for importmulti (MeshCollider)
201451b1ca Make getaddressinfo return solvability (MeshCollider)
1753d217ea Add release notes for importmulti segwit change (MeshCollider)
353c064596 Fix typo in test_framework/blocktools (MeshCollider)
f6ed748cf0 Add SegWit support to importmulti with some ProcessImport cleanup (MeshCollider)
Pull request description:
Add support for segwit to importmulti, supports P2WSH, P2WPKH, P2SH-P2WPKH, P2SH-P2WSH. Adds a new `witnessscript` parameter which must be used for the witness scripts in the relevant situations.
Also includes some tests for the various import types.
~Also makes the change in #14019 redundant, but cherry-picks the test from that PR to test the behavior (@achow101).~
Fixes#12253, also addresses the second point in #12703, and fixes#14407
Tree-SHA512: 775a755c524d1c387a99acddd772f677d2073876b72403dcfb92c59f9b405ae13ceedcf4dbd2ee1d7a8db91c494f67ca137161032ee3a2071282eeb411be090a
5918204304 Removed explicit mention of storage requirement (squashed) (Martin Erlandsson)
Pull request description:
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Tree-SHA512: 3d1e0b1e70c2e2a5003f437c7deba8bc72f487852948c298db154aaf29184fa407e122ab7fdff9bfb4e52cc6062bc2d2122bbbdf805283aed21aa685cf29681c
Similarly discussed and fixed in the following bitcoin.org issue: https://github.com/bitcoin-dot-org/bitcoin.org/pull/2716
Removed mention of storage requirement
Agreeing with @laanwj that this mention of the storage requirement could be removed, I did so and changed the wording accordingly.
Would be nice to be able to add a link to a canonical source that is always updated, for those who want a number.
Update doc/README.md
Co-Authored-By: merland <martin@megabit.se>
Update README.md
added a missing 'a'
eeeaa29214 descriptors.md: Refer to descriptors as describing instead of matching (Russell Yanofsky)
eb49412562 doc/descriptors.md tweaks (Russell Yanofsky)
Pull request description:
Add some implementation details, and tweak phrasing in examples section to be more explicit about how expressions are used for matching.
Tree-SHA512: a9dc7bc0fc370548189a789f31c04bd11103cdd2a99bcb909fa1b1dfa4e78509813dad5d5c9e3db98d66929f45cb5704f5c46ab4cbd800fef22cd8465f80ef33
1fb3c167c3 Add `doc/bitcoin-conf.md` (Hennadii Stepanov)
Pull request description:
From the IRC:
> 2018-10-16T05:35:03 \<wumpus\> if something can be solved by better documentation, please work on documentation!
> 2018-10-16T05:35:12 \<wumpus\> don't change the code instead
Refs:
- #14370
- #14427
- #14494
Based on the BITCOIN.CONF(5) manual page written by Micah Anderson \<micah@debian.org\> for the Debian system.
Tree-SHA512: 16393c9073c027fa1c46f8b59651e60b9a3159b3aeb9b3102040c292d2787f32b1ead5977957ac3ac0759a4bf626650a2325b68ad84320964ac089ffc2d3b4f4
b6b9915318 Textual improvements (Martin Erlandsson)
Pull request description:
Just added a few commas in the right places, to increase readability.
(Also, getting my feet wet in regards to the contribution process...)
Tree-SHA512: 9281af792436efe916e898b34fe20e909291d0c0917e8ccdc4a2af78cf9b6ba7736c554e53b6dbe1d9392b7583b33c3d77b769ab6424c3d7a65513535811878c
d56a068935 docs: Add release notes for listwalletdir RPC (João Barbosa)
0cb3cad166 qa: Add tests for listwalletdir RPC (João Barbosa)
cc3377360c rpc: Add listwalletdir RPC (João Barbosa)
d1b03b8e5f interfaces: Add getWalletDir and listWalletDir to Node (João Barbosa)
fc4db35bfd wallet: Add ListWalletDir utility (João Barbosa)
Pull request description:
`ListWalletDir` returns all available wallets in the current wallet directory.
Based on MeshCollider work in pull #11485.
Tree-SHA512: 5843e3dbd1e0449f55bb8ea7c241a536078ff6ffcaad88ce5fcf8963971d48c78600fbc4f44919523b8a92329d5d8a5f567a3e0ccb0270fdd27366e19603a716
3b706212ad doc: RPC documentation (Karel Bílek)
Pull request description:
The auto-generated RPC docs seem to work so far ( https://bitcoincore.org/en/doc/ + 0.17.0 https://github.com/bitcoin-core/bitcoincore.org/pull/618 ). There are some problems (the design of the list on the right is not ideal, and apparently the huge list of pages slows down jekyll), but that can be fixed later; people are already linking to the docs now and looking for them there
So I am adding the RPC docs to the release process.
The script is here and it is written in golang, since I am most confident in the language; if necessary, I can try to rewrite to python, which is more common in bitcoin tooling
https://github.com/bitcoin-core/bitcoincore.org/tree/master/contrib/doc-gen
Tree-SHA512: ba1b7696bb7ceb6cee4ff222b006b8c18768dd9283a4130751714a782d75ea2ca33f8d9fc4a5263d85a2f001c254daa0cee3b09cc7cba7366c66c5a115d8352a
- Creates m_assumed_blockchain_size and m_assumed_chain_state_size on CChainParams.
- Implements access to CChainParams' m_assumed_blockchain_size and m_assumed_chain_state_size on node interface.
- Implements m_assumed_blockchain_size and m_assumed_chain_state_size on qt/intro via node interface.
- Updates release process document with the new CChainParam's values.
- changes importprivkey behavior to overwrite existent label if one
is passed and keep existing ones if no label is passed
- tests behavior of importprivkey on existing address labels and
different same key destination
fad95e8da6 doc: Split build linux dependencies (MarcoFalke)
0000009015 doc: Split depends installation instructions per arch (MarcoFalke)
Pull request description:
The current depends installation instructions fail on bionic with
```
E: Unable to locate package g++-4.8-aarch64-linux-gnu
E: Unable to locate package gcc-4.8-aarch64-linux-gnu
E: Unable to locate package g++-4.8-arm-linux-gnueabihf
E: Unable to locate package gcc-4.8-arm-linux-gnueabihf
```
Also, they fail due to missing dependencies `make automake cmake pkg-config python3`
Fix this by removing the explicit version and splitting them into common instructions and instructions per linux architecture.
Tree-SHA512: 25d5efa7450a0b1bbd569f431158f5a25bf4fe34f6adc32ebdfd6b6db9447ce083f555f20ff5b9f7c458864986c15d65219a31a1cd2b18bad9965ece2ea5e3be
not that temporary anymore
Tree-SHA512: c44bfca71573b3d70001d339138715fc6fbceae2e370f2e1e8ba5bdfdb19e8ec4b0a59d45ff8565e0f784d4659f51e8089a6d892a73362b428d8a98097fc8532
a2a04a5abb Bugfix: Only run bitcoin-tx tests when bitcoin-tx is enabled (Luke Dashjr)
92af71cea9 configure: Make it possible to build only one of bitcoin-cli or bitcoin-tx (Luke Dashjr)
Pull request description:
Includes #5618 (which the reasons for rejecting no longer hold true)
Tree-SHA512: f30a8e4a2f70166b7cabef77c4674163b3a9da14c6a547d34f00d1056a19bf4d23e22851eea726fad2afc8735d5473ae91122c770b65ac3886663dc20e2c5b70
7ac911afe7 [docs] Add release notes for removing `-usehd` (John Newbery)
25548b2958 [wallet] Remove -usehd (John Newbery)
Pull request description:
`-usehd` is no longer used (except to tell the user that they've set it incorrectly for the wallet that they're loading). Remove it (in the same spirit as #14272)
Tree-SHA512: 5bdcd2bb9bb8504a01343595bcd1bd433d97b730255152c725103c1ac3fa3a9d9e5220a4c29d4c72307cf803e1c09d31080f83603c23dc77263846e17b1826f0
b6718e373e tests: Use MakeUnique to construct objects owned by unique_ptrs (practicalswift)
Pull request description:
A subset of #14211 ("Use MakeUnique to construct objects owned by unique_ptrs") as suggested by @MarcoFalke in https://github.com/bitcoin/bitcoin/pull/14211#issuecomment-423324019.
Use `MakeUnique` to construct objects owned by `unique_ptr`s.
Rationale:
* `MakeUnique` ensures exception safety in complex expressions.
* `MakeUnique` gives a more concise statement of the construction.
Tree-SHA512: 1228ae6ce7beb178d79142c4e936b728178ccaa8aa35c6d8feeb33d1a667abfdd010c59996a9d833594611e913877ce5794e75953d11d9b1fdbac04aa491d9cf
a2eb6f5405 [rpc] Add getnodeaddresses RPC command (chris-belcher)
Pull request description:
Implements issue https://github.com/bitcoin/bitcoin/issues/9463
New getnodeaddresses call gives access via RPC to the peers known by the node. It may be useful for bitcoin wallets to broadcast their transactions over tor for improved privacy without using the centralized DNS seeds. getnodeaddresses is very similar to the getaddr p2p method.
Please advise me on the best approach for writing an automated test. By my reading the getaddr p2p method also isn't really tested.
Tree-SHA512: ad03abf518847476495b76a2f5394b8030aa86654429167fa618e21460abb505c10ef9817ec1b80472320d41d0aff5dc94a8efce023aaaaf5e81386aa92b852b
New getnodeaddresses call gives access via RPC to the peers known by
the node. It may be useful for bitcoin wallets to broadcast their
transactions over tor for improved privacy without using the
centralized DNS seeds. getnodeaddresses is very similar to the getaddr
p2p method.
Tests the new rpc call by feeding IP address to a test node via the p2p
protocol, then obtaining someone of those addresses with
getnodeaddresses and checking that they are a subset.
f1bd03eb01 [depends, zmq, doc] upgrade zeromq to 4.2.5 and avoid deprecated zeromq api functions (mruddy)
Pull request description:
Upgrade the ZeroMQ dependency from version 4.2.3 to the latest stable version 4.2.5.
This PR Follows the lead of https://github.com/bitcoin/bitcoin/pull/11986.
I upgraded both patch files to correspond to the version `4.2.5` libzmq files.
I assume doing so is still necessary and correct.
Without updating the patch line numbers, things appear to work, but you get extra log messages while building `depends` because things don't exactly match, e.g.:
```
/bitcoin/depends> make zeromq
Extracting zeromq...
/bitcoin/depends/sources/zeromq-4.2.5.tar.gz: OK
Preprocessing zeromq...
patching file src/windows.hpp
Hunk #1 succeeded at 58 (offset 3 lines).
patching file src/thread.cpp
Hunk #1 succeeded at 307 with fuzz 2 (offset 87 lines).
Hunk #2 succeeded at 323 with fuzz 2 (offset 90 lines).
```
Updating the patches seemed cleaner, so I did it. Note that libzmq had some whitespace changes, so that's why the updated patches do too.
More info: https://github.com/zeromq/libzmq/releases/tag/v4.2.5
tags: libzmq, zmq, 0mq
Tree-SHA512: 78659dd276b5311e40634b1bbebb802ddd6b69662ba3c84995ef1e3795c49a78b1635112c7fd72a405ea36e2cc3bdeb84e6d00d4e491a349bba1dafff50e2fa5
faea5bfc5a doc: release notes for -enablebip61 default change (MarcoFalke)
fa14b54a87 p2p: Disable BIP 61 by default (MarcoFalke)
Pull request description:
The live p2p network should not be used for debugging or as development aid when implementing the p2p protocol. Instead, applications should be tested locally (e.g. by inspecting the debug log of a validating node on the local network)
Using the p2p network for this purpose seems wasteful and even dangerous, as peers can not be trusted to send the correct reject messages or a reject message at all.
Tree-SHA512: 9c91ad035b5110942172a3b4b8a332a84e0c0aa9ee80f8134aeab63e66ac604841e68b04038681c288b716e5e0cbe38065eb5c7eb63fa72c3bdb3255a4b2d99d
e351a16a2a Remove reference to deprecated RPC call in build instructions (Michael Goldstein)
a6f16f1b1a Docs: Add disable-wallet section to OSX build instructions (Michael Goldstein)
Pull request description:
The `disable-wallet` section was mentioned in the `Berkeley DB` section of the OSX build instructions, but the section did not actually exist. This PR ports the section from the Unix build instructions.
Tree-SHA512: e32f10f3b92307325f2101e89d3e18c89346916e70117c208ad7441170c4aee65b636ea4f7dd1cb0ecf0e800c1aa7c37fa73125e69ecdd539bc862e651b79b16
This commit does the following changes:
- [wallet] Remove 'account' argument from GetLegacyBalance()
- GetLegacyBalance() is never called with an account argument.
Remove the argument and helper functions.
- [wallet] Remove CWallet::ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove AccountMove()
- Function no longer used.
- [wallet] Remove AddAccountingEntry()
- Function no longer used.
- [wallet] Remove GetAccountCreditDebit()
- Function no longer used.
- [wallet] Don't rewrite accounting entries when reordering wallet transactions.
- Accounting entries are deprecated. Don't rewrite them to the wallet
database when re-ordering transactions.
- [wallet] Remove WriteAccountingEntry()
- Function no longer used.
- [wallet] Don't read acentry key-values from wallet on load.
- [wallet] Remove ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove CAccountingEntry class
- No longer used
- [wallet] Remove GetLabelDestination
- Function no longer used.
- [wallet] Delete unused account functions
- ReadAccount
- WriteAccount
- EraseAccount
- DeleteLabel
- [wallet] Remove fromAccount argument from CommitTransaction()
- [wallet] Remove strFromAccount.
- No longer used.
- [wallet] Remove strSentAccount from GetAmounts().
- No longer used.
- [wallet] Update zapwallettxes comment to remove accounts.
- [wallet] Remove CAccount
- No longer used
- [docs] fix typo in release notes for PR 14023
19efc01aec Add PSBT documentation (Pieter Wuille)
Pull request description:
This is just some initial text to get going; other contributions welcome.
I'd like to include other workflows, such as hardware wallets and (manual) coinjoins. However, the former will in practice require PSBT interfaces for existing hardware devices, and the second can really use some extra RPCs first.
Tree-SHA512: 951e475e31bb2ea9ab5d84d139b8bc436153ad035185f00ad1d56afc0c6f7c4de8176a785a6d0c38bb3fd9cbf318e513e1a032e83e1da99ded5d43a36f9cbc60
Now that 0.17 branch has been split off, master is 0.17.99 (pre-0.18).
Also clean out release notes.
Tree-SHA512: bb20025d3ead3346afc7a6a51af715783e705e1de9d1b90ced6423d8969d64e42b72d06a1eb853083b11e9cfe674775266792ae2cd18ed6c858938e125edab03
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
a9e898a4ad docs: Link to python style guidelines from developer notes (Mason Simon)
Pull request description:
Initially I moved the python style guidelines from the functional test README, but some of the python rules are test-specific, and most of the developer notes doc is C++ centric, so just dropping a link seemed better.
Tree-SHA512: 9d4d5cc45526319a118595d90fcfad2c9aced22007aa096d8af04ba1b963312822804f4c15b0b227d66af49565034437691b7760e7ff6d1e3f8b10b898906362
95464c7519 doc: Improve command to generate list of authors for release notes (Mitchell Cash)
1c22cc1af1 doc: Update broken links to now point to gitian-build.py (Mitchell Cash)
Pull request description:
- Update broken links
- Improve command to generate list of authors for a release
---
I also note that it asks to ping **wumpus** on IRC, to assist in generating a list of merged pulls and sort them into categories based on labels. I tried to turn this into a simple one-liner as well (something like ``git log --merges --format="- \`%h\` %s (%an)" v0.16.0..v0.16.1``), but it didn't seem to capture everything I needed.
Would it be worthwhile **wumpus** open-sourcing his code into `contrib/devtools` so there is no single point of failure (even if it can manually be worked around).
Tree-SHA512: 8e7f0880ff07ce8fe67b74de3f2c4b78dafe2c95eefb0617fa319ff196232967cb22ee75a183a39f93bfc6e0bf85547689160139312cee5956af2c069b8a3b6a
f447a0a707 Remove program options from build system (Chun Kuan Lee)
11588c639e Replace boost program_options (Chun Kuan Lee)
Pull request description:
Concept from #12744, but without parsing negated options.
Tree-SHA512: 7f418744bb8934e313d77a5f162633746ef5d043de802b9c9cd9f7c1842e7e566eb5f171cd9e2cc13317281b2449c6fbd553fa4f09b837e6af2f5d2b2aabdca2
- Remove dependency on sed (sed was overkill when you can just add plain
text to the git log --format command)
- Sort resulting list of authors alphabetically (case-insensitive)
- Provide an example of how to only generate authors between versions
801cb307b5 doc: Add release notes for -printtoconsole and -debuglogfile changes (Samuel B. Atwood)
Pull request description:
This adds release notes relevant to the changes in #13004 and documented in command line help in #13614.
Tree-SHA512: ff320415afa9be1ace37ebf0a69ee5a7e6d4167465bc41111be062a556da9b8accfc39553fac610e68521c7ab2095126ace4f012a32f5e9f37cbec39cfa74b04
161e8d40a4 RPC: Add new getzmqnotifications method. (Daniel Kraft)
caac39b0ac Make ZMQ notification interface instance global. (Daniel Kraft)
Pull request description:
This adds a new RPC method `getzmqnotifications`, which returns information about all active ZMQ notification endpoints. This is useful for software that layers on top of bitcoind, so it can verify that ZeroMQ is enabled and also figure out where it should listen.
See #13526.
Tree-SHA512: edce722925741c84ddbf7b3a879fc9db1907e5269d0d97138fe724035d93ee541c2118c24fa92f4197403f380d0e25c2fda5ca6c62d526792ea749cf527a99a0
This adds a new RPC method "getzmqnotifications", which returns
information about all active ZMQ notification endpoints. This is useful
for software that layers on top of bitcoind, so it can verify that
ZeroMQ is enabled and also figure out where it should listen.
See https://github.com/bitcoin/bitcoin/issues/13526.
af6ac3b677 doc: Remove mention of Qt4 from build docs (Wladimir J. van der Laan)
462c71f71b test: Update travis to not test Qt4 anymore (Wladimir J. van der Laan)
907f73bbc5 gui: Remove QT_VERSION fallbacks for Qt < 5 (Wladimir J. van der Laan)
bad068ad9f build: Build system changes to support only Qt5 (Wladimir J. van der Laan)
Pull request description:
Implements #8263.
Qt4.x has been EOL since 2015, and at least Gentoo has, or is going to drop support for it. I wouldn't be surprised if other Linux distributions follow.
This removes Qt4 detection from the build system, as well as removes all Qt4 fallbacks from the code. Turns out there's more than I expected: this is going to make maintenance of the GUI code, as well as adding new features significantly easier.
(I know there's still some references left to qt4 in RPM and Debian build script, but I don't have the knowledge how to fix them)
Tree-SHA512: d495924fd4dda6f6566ba44ee96be7cbe62e69ba1ca993b80a8449f78da852b7f1bd3e8200d57cfa1d72233c340eeff4596fb0032ecbddc715d99aea63817d3f
c9924a2756 Fix incorrect shell quoting in FreeBSD build instructions. (murrayn)
Pull request description:
The current instructions suggest:
BDB_PREFIX='$PWD/db4'
which results in BDB_PREFIX being set, literally, to '$PWD/db4'.
Tree-SHA512: 4a920d7a506ff94fb12793f0b8161fdfe0798382cfa88290a0eadd6926843b577328f7159a55039e2655def7ddf2e7a1eaa3dd30490292d4a920c98759becf56
e56771365b Do not use uppercase characters in source code filenames (practicalswift)
419a1983ca docs: Add a note about the source code filename naming convention (practicalswift)
Pull request description:
Add a note about the source code filename naming convention.
Tree-SHA512: 8d329bd9e19bcd26e74b0862fb0bc2369b46095dbd3e69d34859908632763abd7c3d00ccc44ee059772ad4bae4460c2bcc1c0e22fd9d8876d57e5fcd346cea4b
16e3cd380a Clarify include recommendation (practicalswift)
6d10f43738 Enforce the use of bracket syntax includes ("#include <foo.h>") (practicalswift)
906bee8e5f Use bracket syntax includes ("#include <foo.h>") (practicalswift)
Pull request description:
When analysing includes in the project it is often assumed that the preferred bracket include syntax (`#include <foo.h>`) mentioned in `developer-docs.md` is used consistently. @sipa:s excellent circular dependencies script [`circular-dependencies.py`](50c69b7801/contrib/devtools/circular-dependencies.py) (#13228) is an example of a script making this reasonable assumption.
This PR enables automatic Travis checking of the include syntax making sure that the bracket syntax includes (`#include <foo.h>`) is used consistently.
Tree-SHA512: a414921aabe8e487ebed42f3f1cbd02fecd1add385065c1f2244cd602c31889e61fea5a801507ec501ef9bd309b05d3c999f915cec1c2b44f085bb0d2835c182
67e0e04140 [wallet] [docs] Update release notes for removing `getlabeladdress` (John Newbery)
81608178cf [wallet] [rpc] Remove getlabeladdress RPC (John Newbery)
Pull request description:
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
Tree-SHA512: 7f45d0456248ebcc4e54dd34e2578a09a8ea8e4fceda75238ccea9d731dc99a3f3c0519b18a9739de17d2e6e59c9c2259ba67c9ae2e3cb2a40ddb14b9193fe29
cbede7dbfd [qt] OptionsDialog: add prune setting (Sjors Provoost)
Pull request description:
The default suggested value is 2 GB. Minimum is 1 GB (550 MB rounded up).
When the user toggles this setting, a strong warning appears that undoing requires re-downloading the chain:
<img width="478" alt="schermafbeelding 2018-05-15 om 12 35 24" src="https://user-images.githubusercontent.com/10217/40051858-7939cc20-583c-11e8-9120-327a75376732.png">
Tooltip points out that actual disk usage can be higher. It's a bit vague on the "advanced features", because I'm assuming anyone who needs to use `-rescan` and `-txindex` will read the documentation, and a more detailed text would needlessly confuse everyone else.
<img width="450" alt="schermafbeelding 2018-05-15 om 12 33 51" src="https://user-images.githubusercontent.com/10217/40051791-49d6156a-583c-11e8-97b9-7de6dfd8c481.png">
The UI uses gigabytes for readability and easy of use. There is also no manual pruning UI (`prune=1`). The user will have to use `bitcoin.conf` for those things.
Fixes#6461. When combined with #13029 the user, after pruning their node, can safely reset settings and/or use bitcoind without having to edit `bitcoin.conf`. However I don't think that's an essential prerequisite.
Tree-SHA512: e17aff276d7235fbd40796adb6431d430620788a753ee13bc064abd35d2edc4280a3d3cddc18e42b4e00edff13ed18fd4f2a966c6f0b43b689afd13673e0c4bf
2b30ccc30a [docs] update transifex doc link (Cristian Mircea Messel)
Pull request description:
The old link is no longer working.
#13364
Tree-SHA512: 5729b9eabbdf8e05cb60be1bedc7e21a2052bb2921dca8322d8348c3ea0f7ee33f2e2e32a19f21bbe2b93b48ed221cfcb020592d0e6b118b77ca34e14bb30b89
docs: Linked to the 'Building on FreeBSD' section of the Unix guide where it lists BSD specific guides.
Created a FreeBSD build guide (doc/build-freebsd.md).
Added in warning about the version of 'gdb' installed by default.
Removed the FreeBSD build instructions now that they have their own guide (doc/build-freebsd.md).
Updated the sentence to refer to the BSD guides in the 'doc' directory for more specific BSD build instructions.
Minor grammatical fix.
fa3c910bfe test: Move linters to test/lint, add readme (MarcoFalke)
Pull request description:
This moves the checks and linters from `devtools` to a subfolder in `test`. (Motivated by my opinion that the dev tools are mostly for generating code and updating the repo whereas the linters are read-only checks.)
Also, adds a readme to clarify that checks and linters are only meant to prevent bugs and user facing issues, not merely stylistic preference or inconsistencies. (This is motivated by the diversity in developers and work flows as well as existing code styles. It would be too disruptive to change all existing code to a single style or too burdensome to force all developers to adhere to a single style. Also note that our style guide is changing, so locking in at the wrong style "too early" would only waste resources.)
Tree-SHA512: 9b10e89f2aeaf0c8a9ae248aa891d74e0abf0569f8e5dfd266446efa8bfaf19f0ea0980abf0b0b22f0d8416ee90d7435d21a9f9285b66df43f370b7979173406
87fe292d89 doc: Mention disabling BIP61 in bips.md (Wladimir J. van der Laan)
fe16dd8226 net: Add option `-enablebip61` to configure sending of BIP61 notifications (Wladimir J. van der Laan)
Pull request description:
This commit adds a boolean option `-peersendreject`, defaulting to `1`, that can be used to disable the sending of [BIP61](https://github.com/bitcoin/bips/blob/master/bip-0061.mediawiki) `reject` messages. This functionality has been requested for various reasons:
- security (DoS): reject messages can reveal internal state that can be used to target certain resources such as the mempool more easily.
- bandwidth: a typical node sends lots of reject messages; this counts against upstream bandwidth. Also the reject messages tend to be larger than the message that was rejected.
On the other hand, reject messages can be useful while developing client software (I found them indispensable while creating bitcoin-submittx), as well as for our own test cases, so whatever the default becomes on the long run, IMO the functionality should be retained as option. But that's a discussion for later, for now it's simply a node operator decision.
Also adds a RPC test that checks the functionality.
Tree-SHA512: 9488cc53e13cd8e5c6f8eb472a44309572673405c1d1438c3488f627fae622c95e2198bde5ed7d29e56b948e2918bf1920239e9f865889f4c37c097c37a4d7a9
9d4f9421a4 doc: Bump to Ubuntu Bionic 18.04 in build-windows.md (Chun Kuan Lee)
Pull request description:
Windows starts to provide Ubuntu 18.04 WSL, it can be downloaded from Microsoft Store.
Tree-SHA512: a96ed03f36894ad867fd88631c1497eac7fc1cdaee8f59f36f34781df0b0f0b352a1bd8f09eba61002534fb7e0fe460006f223e37d61ad888197a36d17b43178
25b7ab9 doc: Add release notes for -includeconf (Karl-Johan Alm)
0f0badd test: Test includeconf parameter. (Karl-Johan Alm)
629ff8c -includeconf=<path> support in config handler, for including external configuration files (Karl-Johan Alm)
Pull request description:
Fixes: #10071.
Done:
- adds `-includeconf=<path>`, where `<path>` is relative to `datadir` or to the path of the file being read, if in a file
- protects against circular includes
- updates help docs
~~~Thoughts:~~~
- ~~~I am not sure how to test this in a neat manner. Feedback on this would be nice. Will dig/think though.~~~
Tree-SHA512: cb31f1b2f69fbc0890d264948eb2e501ac05cf12f5e06a5942f9c1539eb15ea8dc3cae817f4073aecb2fcc21d0386747f14f89d990772003a76e2a6d25642553
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
39d2911 [Docs] Add version footnote to tor.md (Damian Williamson)
Pull request description:
[Docs] Add version footnote to tor.md
Added note to section 2, part -edits to `/etc/tor/torrc`- indicating this is only required for Tor version 0.2.7.0 and older, since section 3 states it is valid for Tor version 0.2.7.1 and newer. Added ref link from section 2 version footnote to section 3. Re-styled headings to work on GitHub -alternate heading style markup creation issue with numbered headings and thus headings and automatic heading links are broken-
Ref: [Issue# 12376](https://github.com/bitcoin/bitcoin/issues/12376)
Signed-off-by: Damian Williamson \<willtech@live.com.au\>
Tree-SHA512: 439f4ccc3e196011af448b220adf26b0e653ac589bf4cfbbc276c1500c9d08f209c9d6101e4d232857779d9f25164cfb222ed30e3d63de116f9121e6ebde31c3
Added note to section 2, part -edits to `/etc/tor/torrc`- indicating this is only required for Tor version 0.2.7.0 and older, since section 3 states it is valid for Tor version 0.2.7.1 and newer. Added ref link from section 2 version footnote to section 3. Re-styled headings to work on GitHub -alternate heading style markup creation issue with numbered headings and thus headings and automatic heading links are broken- Ref: [Issue# 12376](https://github.com/bitcoin/bitcoin/issues/12376)
Signed-off-by: Damian Williamson <willtech@live.com.au>
7d0f80b Use anonymous namespace instead of static functions (Pieter Wuille)
b61fb71 Mention removal of bare multisig IsMine in release notes (Pieter Wuille)
9c2a8b8 Do not treat bare multisig as IsMine (Pieter Wuille)
08f3228 Optimization: only test for witness scripts at top level (Pieter Wuille)
3619735 Track difference between scriptPubKey and P2SH execution in IsMine (Pieter Wuille)
ac6ec62 Switch to a private version of SigVersion inside IsMine (Pieter Wuille)
19fc973 Do not expose SigVersion argument to IsMine (Pieter Wuille)
fb1dfbb Remove unused IsMine overload (Pieter Wuille)
952d821 Make CScript -> CScriptID conversion explicit (Pieter Wuille)
Pull request description:
Currently our wallet code will treat bare multisig outputs (meaning scriptPubKeys with multiple public keys + `OP_CHECKMULTISIG` operator in it) as ours without the user asking for it, as long as all private keys in it are in our wallet.
This is a pointless feature. As it only works when all private keys are in one place, it's useless compared to single key outputs (P2PK, P2PKH, P2WPKH, P2SH-P2WPKH), and worse in terms of space, cost, UTXO size, and ability to test (due to lack of address format for them).
Furthermore, they are problematic in that producing a list of all `scriptPubKeys` we accept is not tractable (it involves all combinations of all public keys that are ours). In further wallet changes I'd like to move to a model where all scriptPubKeys that are treated as ours are explicit, rather than defined by whatever keys we have. The current behavior of the wallet is very hard to model in such a design, so I'd like to get rid of it.
I think there are two options:
* Remove it entirely (do not ever accept bare multisig outputs as ours, unless watched)
* Only accept bare multisig outputs in situations where the P2SH version of that output would also be acceptable
This PR implements the first option. The second option was explored in #12874.
Tree-SHA512: 917ed45b3cac864cee53e27f9a3e900390c576277fbd6751b1250becea04d692b3b426fa09065a3399931013bd579c4f3dbeeb29d51d19ed0c64da75d430ad9a
7de1de7 Add new fee structure with all sub-fields denominated in BTC (mryandao)
Pull request description:
the denomination for `fee` is current in btc while the other such as `decendentFee` and `ancestorFee` are in satoshis.
Tree-SHA512: e428f6dca1d339f89ab73e38ce5903f5465c46b159069d9bcc3f8b1140fe6657fa49a11abe0088e9f7ba9999f64af72a349a4735bf5eaa61b8e4a185b23543f3
fad2958 [doc] build-windows: Switch to Artful, since Zesty is EOL (MarcoFalke)
Pull request description:
According to https://wiki.ubuntu.com/Releases#End_of_Life, Zesty is EOL, so bump to Artful for now.
Note that Artful is going to be EOL soon as well, so I am not sure how to proceed after that.
Tree-SHA512: 8efc1ade429cf053f4c69e764175aad8790ded71f04bb9963202be171f1cfa1a3de55a207c0b19271d2f536feafa754ed71a6fafc597e3023bdf0e02fa5cd5e5
cead28b [docs] Add release notes for deprecated 'account' API (John Newbery)
72c9575 [wallet] [tests] Add tests for accounts/labels APIs (John Newbery)
109e05d [wallet] [rpc] Deprecate wallet 'account' API (John Newbery)
3576ab1 [wallet] [rpc] Deprecate account RPC methods (John Newbery)
3db1ba0 [tests] Set -deprecatedrpc=accounts in tests (John Newbery)
4e671f0 [tests] Rename rpc_listtransactions.py to wallet_listtransactions.py (John Newbery)
a28b907 [wallet] [rpc] Remove duplicate entries in rpcwallet.cpp's CRPCCommand table (John Newbery)
Pull request description:
Deprecate all accounts functionality and make it only accessible by using `-deprecatedrpc=accounts`.
Accounts specific RPCs, account arguments, and account related results all require the `-deprecatedrpc=accunts` startup option now in order to see account things.
Several wallet functional tests use the accounts system. Those tests are unchanged, except to start the nodes with `-deprecatedrpc=accounts`. We can slowly migrate those tests to use the 'label' API instead of the 'account' API before accounts are fully removed.
Tree-SHA512: 89f4ae2fe6de4a1422f1817b0997ae22d63ab5a1a558362ce923a3871f3e42963405d6573c69c27f1764679cdee5b51bf52202cc407f1361bfd8066d652f3f37
9e50c337c Note new weight field in release-notes. (Matt Corallo)
d0d9112b7 Test new weight field in p2p_segwit (Matt Corallo)
2874709a9 Expose a transaction's weight via RPC (Matt Corallo)
Pull request description:
This seems like an obvious oversight.
Tree-SHA512: defd047de34fb06a31f589e1a4eef68fcae85095cc67b7c8fb434237bb40300d7f3f97e852d3e7226330e26b96943846b7baf6da0cfc79db8d56e9c1f7848ad9
c25321f Add config changes to release notes (Anthony Towns)
5e3cbe0 [tests] Unit tests for -testnet/-regtest in [test]/[regtest] sections (Anthony Towns)
005ad26 ArgsManager: special handling for -regtest and -testnet (Anthony Towns)
608415d [tests] Unit tests for network-specific config entries (Anthony Towns)
68797e2 ArgsManager: Warn when ignoring network-specific config setting (Anthony Towns)
d1fc4d9 ArgsManager: limit some options to only apply on mainnet when in default section (Anthony Towns)
8a9817d [tests] Use regtest section in functional tests configs (Anthony Towns)
30f9407 [tests] Unit tests for config file sections (Anthony Towns)
95eb66d ArgsManager: support config file sections (Anthony Towns)
4d34fcc ArgsManager: drop m_negated_args (Anthony Towns)
3673ca3 ArgsManager: keep command line and config file arguments separate (Anthony Towns)
Pull request description:
The weekly meeting on [2017-12-07](http://www.erisian.com.au/meetbot/bitcoin-core-dev/2017/bitcoin-core-dev.2017-12-07-19.00.log.html) discussed allowing options to bitcoin to have some sensitivity to what network is in use. @theuni suggested having sections in the config file:
<cfields> an alternative to that would be sections in a config file. and on the
cmdline they'd look like namespaces. so, [testnet] port=5. or -testnet::port=5.
This approach is (more or less) supported by `boost::program_options::detail::config_file_iterator` -- when it sees a `[testnet]` section with `port=5`, it will treat that the same as "testnet.port=5". So `[testnet] port=5` (or `testnet.port=5` without the section header) in bitcoin.conf and `-testnet.port=5` on the command line.
The other aspect to this question is possibly limiting some options so that there is no possibility of accidental cross-contamination across networks. For example, if you're using a particular wallet.dat on mainnet, you may not want to accidentally use the same wallet on testnet and risk reusing keys.
I've set this up so that the `-addnode` and `-wallet` options are `NETWORK_ONLY`, so that if you have a bitcoin.conf:
wallet=/secret/wallet.dat
upnp=1
and you run `bitcoind -testnet` or `bitcoind -regtest`, then the `wallet=` setting will be ignored, and should behave as if your bitcoin.conf had specified:
upnp=1
[main]
wallet=/secret/wallet.dat
For any `NETWORK_ONLY` options, if you're using `-testnet` or `-regtest`, you'll have to add the prefix to any command line options. This was necessary for `multiwallet.py` for instance.
I've left the "default" options as taking precedence over network specific ones, which might be backwards. So if you have:
maxmempool=200
[regtest]
maxmempool=100
your maxmempool will still be 200 on regtest. The advantage of doing it this way is that if you have `[regtest] maxmempool=100` in bitcoin.conf, and then say `bitcoind -regtest -maxmempool=200`, the same result is probably in line with what you expect...
The other thing to note is that I'm using the chain names from `chainparamsbase.cpp` / `ChainNameFromCommandLine`, so the sections are `[main]`, `[test]` and `[regtest]`; not `[mainnet]` or `[testnet]` as might be expected.
Thoughts? Ping @MeshCollider @laanwj @jonasschnelli @morcos
Tree-SHA512: f00b5eb75f006189987e5c15e154a42b66ee251777768c1e185d764279070fcb7c41947d8794092b912a03d985843c82e5189871416995436a6260520fb7a4db
Suggested formatting for namespaces in the developer guide is currently
inconsistent. This commit updates the developer guide and clang-format
configuration to consistently put "namespace" and opening/closing braces
on the same line. Example:
```c++
namespace boost {
namespace signals2 {
class connection;
} // namespace signals2
} // namespace boost
```
Currently the "Source code organization" section has an example like the one
above, but the "Coding style" section example and description put a newline
between the opening "namespace foo" and brace (but oddly no newline between
closing namespace and brace).
Avoiding newlines before namespace opening braces makes nested declarations
less verbose and also avoids asymmetry with closing braces. It's also a
common style used in other codebases:
* https://google.github.io/styleguide/cppguide.html#Namespaces
* https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Coding_Style#Classes
* https://llvm.org/docs/CodingStandards.html#namespace-indentation
fad0fc3c9a Refine travis check for duplicate includes (MarcoFalke)
Pull request description:
Since there is no harm in having "duplicate" includes and it makes it obvious what are the dependencies of each file, without having to do static analysis or jumping between files, I'd suggest to revert the travis check for duplicate includes.
Generally, I think that enforcing minor style preferences should not be done via travis. The cost of maintaining and the burden on other developers is too high. C.f discussion in https://github.com/bitcoin/bitcoin/pull/10973#discussion_r180142594
Tree-SHA512: 97ab0e769d457ccfb873fff6c99613f8b944cd7ef95bfdccb0e1bbe8f5df1f16548c658fa03af42516f806546e75646d338a061e7b057619490235d311ca21f1
d1b622b tests: Add check for test suite name uniqueness in lint-tests.sh (practicalswift)
dc8067b tests: Add note about uniqueness requirement for test suite names (practicalswift)
3ebfb2d tests: Avoid test suite name collision in wallet crypto_tests (MarcoFalke)
Pull request description:
* Add documentation: Add note about test suite name uniqueness requirement in developer notes
* Add regression test: Update `lint-tests.sh` to make it check also for test suite name uniqueness
Context: #12894 (`tests: Avoid test suite name collision in wallet crypto_tests`)
Tree-SHA512: 3c8502db069ef3d753f534976a86a997b12bac539e808a7285193bf81c9dd8c1b06821c3dd1bdf870ab87722b02c8aa9574c62ace70c2a1b8091785cb8c9aace
fafcad3 doc: Add testmempoolaccept to release-notes (MarcoFalke)
Pull request description:
Some fixups for #11742:
* Add release notes for the new rpc
* Fix a typo in the original pull
* Make the mempool reference passed to `CheckInputsFromMempoolAndCache` const, since that function is called before we return from ATMP and we must not modify the mempool.
Tree-SHA512: 72c459ba69f7698a69c91d2592f10f7fb1864846c7d8c525050d48286f92ba5ec5fe554c54235b52fbd9a8f00226c526ad84584641ec39084e1a1310a261510d
0314ad4 doc: add qrencode to brew install instructions (buddilla)
Pull request description:
Build was missing qr code(qrencode libs) support and brew team no longer supports anything less than macOS 10.11
Tree-SHA512: 1bc22f02e64f0db0730180ca97fba17c7ad05c9d81c60d1b0d029196d5141e691e524d2df2be1fb89852076f3a252da69bb117042cbd08985b89954432692529
Based on suggestion by Pieter Wuille <pieter.wuille@gmail.com> at
https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output
type that couldn't be parsed, or to an automatic change output mode. This
change drops the NONE enum and uses a simple bool indicate parse failure, and a
new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty
string ("") address types instead of treating them like they were unset. This
simplifies the parsing code a little bit and could prevent RPC usage mistakes.
It's noted in the release notes.
9960137 Add developer notes about blocking GUI code (Russell Yanofsky)
9a61eed Use WalletBalances struct in Qt (Russell Yanofsky)
56f33ca Remove direct bitcoin calls from qt/sendcoinsdialog.cpp (Russell Yanofsky)
e872c93 Remove direct bitcoin access from qt/guiutil.cpp (Russell Yanofsky)
5884558 Remove direct bitcoin calls from qt transaction table files (Russell Yanofsky)
3cab2ce Remove direct bitcoin calls from qt/paymentserver.cpp (Russell Yanofsky)
3ec2ebc Remove direct bitcoin calls from qt/addresstablemodel.cpp (Russell Yanofsky)
827de03 Remove direct bitcoin calls from qt/coincontroldialog.cpp (Russell Yanofsky)
a0704a8 Remove most direct bitcoin calls from qt/walletmodel.cpp (Russell Yanofsky)
90d4640 Remove direct bitcoin calls from qt/optionsdialog.cpp (Russell Yanofsky)
582daf6 Remove direct bitcoin calls from qt/rpcconsole.cpp (Russell Yanofsky)
3034a46 Remove direct bitcoin calls from qt/bantablemodel.cpp (Russell Yanofsky)
e0b66a3 Remove direct bitcoin calls from qt/peertablemodel.cpp (Russell Yanofsky)
d7c2c95 Remove direct bitcoin calls from qt/intro.cpp (Russell Yanofsky)
fe6f27e Remove direct bitcoin calls from qt/clientmodel.cpp (Russell Yanofsky)
5fba3af Remove direct bitcoin calls from qt/splashscreen.cpp (Russell Yanofsky)
c2f672f Remove direct bitcoin calls from qt/utilitydialog.cpp (Russell Yanofsky)
3d619e9 Remove direct bitcoin calls from qt/bitcoingui.cpp (Russell Yanofsky)
c0f2756 Remove direct bitcoin calls from qt/optionsmodel.cpp (Russell Yanofsky)
71e0d90 Remove direct bitcoin calls from qt/bitcoin.cpp (Russell Yanofsky)
ea73b84 Add src/interface/README.md (Russell Yanofsky)
Pull request description:
This is a refactoring PR that does not change behavior in any way. This change:
1. Creates abstract [`Node`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/node.h) and [`Wallet`](https://github.com/ryanofsky/bitcoin/blob/pr/ipc-local/src/interface/wallet.h) interfaces in [`src/interface/`](https://github.com/ryanofsky/bitcoin/tree/pr/ipc-local/src/interface)
1. Updates Qt code to call the new interfaces. This largely consists of diffs of the form:
```diff
- InitLogging();
- InitParameterInteraction();
+ node.initLogging();
+ node.initParameterInteraction();
```
This change allows followup PR #10102 (makes `bitcoin-qt` control `bitcoind` over an IPC socket) to work without any significant updates to Qt code. Additionally:
* It provides a single place to describe the interface between GUI and daemon code.
* It can make better GUI testing possible, because Node and Wallet objects have virtual methods that can be overloaded for mocking.
* It can be used to help make the GUI more responsive (see https://github.com/bitcoin/bitcoin/issues/10504)
Other notes:
* I used python scripts [hide-globals.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/hide-globals.py) and [replace-syms.py](https://github.com/ryanofsky/home/blob/master/src/2017/hide-globals/replace-syms.py) to identify all the places where Qt code was accessing libbitcoin global variables and calling functions accessing those global variables.
* These changes were originally part of #10102. Thanks to @JeremyRubin for the suggestion of splitting them out.
Commits:
- [`ea73b84d2d` Add src/interface/README.md](ea73b84d2d)
- [`71e0d90876` Remove direct bitcoin calls from qt/bitcoin.cpp](71e0d90876)
- [`c0f2756be5` Remove direct bitcoin calls from qt/optionsmodel.cpp](c0f2756be5)
- [`3d619e9d36` Remove direct bitcoin calls from qt/bitcoingui.cpp](3d619e9d36)
- [`c2f672fb19` Remove direct bitcoin calls from qt/utilitydialog.cpp](c2f672fb19)
- [`5fba3af21e` Remove direct bitcoin calls from qt/splashscreen.cpp](5fba3af21e)
- [`fe6f27e6ea` Remove direct bitcoin calls from qt/clientmodel.cpp](fe6f27e6ea)
- [`d7c2c95948` Remove direct bitcoin calls from qt/intro.cpp](d7c2c95948)
- [`e0b66a3b7c` Remove direct bitcoin calls from qt/peertablemodel.cpp](e0b66a3b7c)
- [`3034a462a5` Remove direct bitcoin calls from qt/bantablemodel.cpp](3034a462a5)
- [`582daf6d22` Remove direct bitcoin calls from qt/rpcconsole.cpp](582daf6d22)
- [`90d4640b7e` Remove direct bitcoin calls from qt/optionsdialog.cpp](90d4640b7e)
- [`a0704a8996` Remove most direct bitcoin calls from qt/walletmodel.cpp](a0704a8996)
- [`827de038ab` Remove direct bitcoin calls from qt/coincontroldialog.cpp](827de038ab)
- [`3ec2ebcd9b` Remove direct bitcoin calls from qt/addresstablemodel.cpp](3ec2ebcd9b)
- [`3cab2ce5f9` Remove direct bitcoin calls from qt/paymentserver.cpp](3cab2ce5f9)
- [`58845587e1` Remove direct bitcoin calls from qt transaction table files](58845587e1)
- [`e872c93ee8` Remove direct bitcoin access from qt/guiutil.cpp](e872c93ee8)
- [`56f33ca349` Remove direct bitcoin calls from qt/sendcoinsdialog.cpp](56f33ca349)
- [`9a61eed1fc` Use WalletBalances struct in Qt](9a61eed1fc)
- [`9960137697` Add developer notes about blocking GUI code](9960137697)
Tree-SHA512: 7b9eff2f37d4ea21972d7cc6a3dbe144248595d6c330524396d867f3cd2841d666cdc040fd3605af559dab51b075812402f61d628d16cf13719335c1d8bf8ed3
db983beba6 tests: Add lint-tests.sh which checks the test suite naming convention (practicalswift)
5fd864fe8a tests: Rename test suits not following the test suite naming convention (practicalswift)
7b4a296a71 tests: Add note about test suite naming convention (practicalswift)
Pull request description:
Changes:
* Add note about test suite naming convention
* Fix exceptions
* Add regression test
Rationale:
* Consistent naming of test suites makes programmatic test running of specific tests/subsets of tests easier
* Explicit is better than implicit
Before this commit:
```
$ contrib/devtools/lint-tests.sh
The test suite in file src/test/foo_tests.cpp should be named
"foo_tests". Please make sure the following test suites follow
that convention:
src/test/blockchain_tests.cpp:BOOST_FIXTURE_TEST_SUITE(blockchain_difficulty_tests, BasicTestingSetup)
src/test/prevector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(PrevectorTests, TestingSetup)
src/wallet/test/coinselector_tests.cpp:BOOST_FIXTURE_TEST_SUITE(coin_selection_tests, WalletTestingSetup)
src/wallet/test/crypto_tests.cpp:BOOST_FIXTURE_TEST_SUITE(wallet_crypto, BasicTestingSetup)
$
```
After this commit:
```
$ contrib/devtools/lint-tests.sh
$
```
Tree-SHA512: 7258ab9a6b9b8fc1939efadc619e2f2f02cfce8034c7f2e5dc5ecc769aa12e17f6fb8e363817feaf15c026c5b958b2574525b8d2d3f6be69658679bf8ceea9e9
6feb46c Add --with-sanitizers option to configure (Evan Klitzke)
Pull request description:
This adds configure options for `-fsanitize=address`, `-fsanitize=thread`, and `-fsanitize=undefined` which are all disabled by default. These flags are useful for developers who wish to do additional safety checking. Note that some of these are mutually incompatible, and these may have a large performance overhead.
There's some kind of strange logic required to properly check for the availability of these flags in a way that works on both GCC and Clang, hopefully the comments make it clear what's going on.
Tree-SHA512: 2d6fe402799110e59ee452dddf37f7ca2d26a7fecec50be25c8a134e4a20beb31f1e8f438dffd443641562418075896d1eeb450623425b272d80e05e3027a587
0bd2ec5 Improve formatting of developer notes (Evan Klitzke)
Pull request description:
The developer notes file has gotten pretty large and unwieldly. This reorganizes some content, most notably by adding a TOC to the page. Compare how the page looks in [my branch](https://github.com/eklitzke/bitcoin/blob/developer-notes/doc/developer-notes.md) vs [master](https://github.com/eklitzke/bitcoin/blob/master/doc/developer-notes.md).
I know there's long-term interest in moving a lot of this content to the bitcoin-core/docs repo on GitHub, but this makes things better now.
The TOC format here is a semi-standard extension to Markdown files that you may have seen on GitHub pages in other projects. The `<!-- markdown-toc -->` comments used by these tools to know where the TOC starts/ends. The following tools all understand this format:
* [Sphinx](http://www.sphinx-doc.org/en/master/)
* [Pandoc](https://pandoc.org/)
* [markdown-toc.el](https://github.com/ardumont/markdown-toc) (what I used)
* various plugins for [vim](https://github.com/mzlogin/vim-markdown-toc) and other editors
I used this TOC extension at a previous job, and my observation is that it's fine if people just edit the TOC manually. It's just text and it's not a huge deal if it gets a little out of sync. It can also be regenerated at any time by anyone with any of these tools.
Tree-SHA512: 298d1605ea5e8bfc0f75e70570c23ebd6891e4ffcdedd24fefadc23edd6e4b96509d8d102209868468a1b3ddbe2c3b8462698cdda8b9421348b5bc6f7b8d0cb8
This change significantly increases IBD performance by increasing the
amount of the UTXO index that can remain in memory. To ensure this
doesn't cause problems in the future, a static_assert on the LevelDB
version has been added, which must be updated by anyone upgrading
LevelDB.
1874058 Make base58 python contrib code work with python3 (Evan Klitzke)
bc6fdf2 Change all python files to use Python3 (John Newbery)
Pull request description:
Following discussion here: https://github.com/bitcoin/bitcoin/pull/11843#issuecomment-351033742
It's easier for maintainers if all python tools/scripts support only a single version of Python. There are only a few scripts that aren't explicitly python3 at this point, so this PR changes those remaining scripts to explicitly require python3.
Tree-SHA512: 5d38eef6e0fc7d8515e23a1f4c75e8b4160fd0fe23cba52a1f41689b114e54a9e503e0724829e8b41982ef98f2d113df80d9e238213b74f09ceaed0344a19e24
f381299 Move CKeyStore::cs_KeyStore to CBasicKeyStore (João Barbosa)
25eb9f5 Inline CKeyStore::AddKey(const CKey &) in CBasicKeyStore (João Barbosa)
Pull request description:
Made these simplifications while reviewing #12714. This aims to make `CKeyStore` a *pure* interface:
- no variable members - the mutex is moved to `CBasicKeyStore` which is where it is used;
- no method implementations - `AddKey(const CKey &)` is moved to `CBasicKeyStore` which is where it is needed.
Tree-SHA512: 84e44f4390c59600e5cefa599b5464e1771c31dd4abc678ef50db8e06ffac778d692860a352918444f8bcd66430634637b6277a818a658721ffc4f381c1c6a90
4757c04 [config] Remove blockmaxsize option (John Newbery)
Pull request description:
The blockmaxsize option was marked as deprecated in V0.15.1, and code
was added to convert provided blockmaxsize into blockmaxweight. However,
this code was incorrectly implemented, and blockmaxsize was silently
ignored.
No users have complained about blockmaxsize being ignored, so just
remove it in V0.17.
Fixes#12640
cc @ajtowns
Tree-SHA512: 968d71d37bf175c5a02539ddec289a12586f886e1dfe64c1d9aa5e39db48d06d21665153824fac3b11503a55f0812d2f1115a2d726aafd37b76ed629ec0aa671
d2527bd Rename wallet_accounts.py test (Russell Yanofsky)
045eeb8 Rename account to label where appropriate (Russell Yanofsky)
Pull request description:
Rename account to label where appropriate
This change only updates strings and adds RPC aliases, but should simplify the implementation of address labels in https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the way and letting that change focus on semantics.
The difference between accounts and labels is that labels apply only to addresses, while accounts apply to both addresses and transactions (transactions have "from" and "to" accounts). The code associating accounts with transactions is clumsy and unreliable so we would like get rid of it.
---
There is a rebased version of #7729 atop this PR at https://github.com/ryanofsky/bitcoin/commits/pr/label, see https://github.com/bitcoin/bitcoin/pull/7729#issuecomment-338417139.
Tree-SHA512: b3f934e612922d6290f50137f8ba71ddfaea4485713c7d97e89400a8b73b09b254f9186dffa462c77f5847721f5af9852b5572ade5443d8ee95dd150b3edb7ff
The blockmaxsize option was marked as deprecated in V0.15.1, and code
was added to convert provided blockmaxsize into blockmaxweight. However,
this code was incorrectly implemented, and blockmaxsize was silently
ignored.
No users have complained about blockmaxsize being ignored, so just
remove it in V0.17.
This change only updates strings and adds RPC aliases, but should simplify the
implementation of address labels in
https://github.com/bitcoin/bitcoin/pull/7729, by getting renaming out of the
way and letting it focus on semantics.
The difference between accounts and labels is that labels apply only to
addresses, while accounts apply to both addresses and transactions
(transactions have "from" and "to" accounts). The code associating accounts
with transactions is clumsy and unreliable so we would like get rid of it.
e29c6c8 Ubuntu xenial first dependencies (Nick Vercammen)
Pull request description:
Add update and upgrade commands to enable the installation of the first dependencies on ubuntu xenial. If those are not executed some packages can not be found.
Tree-SHA512: ad15f8f053703f5b785c307a39b28bd3584fb1f9c32cc166e53955733f03ea3df445959577d65ac8c95c3619a0417894121603f8e656421d30992f4fdd6055f9
fac70134a rpc: Update createrawtransaction examples (MarcoFalke)
fa06dfce0 [rpc] createrawtransaction: Accept sorted outputs (MarcoFalke)
8acd25d85 rpc: Allow typeAny in RPCTypeCheck (MarcoFalke)
Pull request description:
The second parameter of the `createrawtransaction` is a dictionary of the outputs. This comes with at least two drawbacks:
* In case of duplicate keys, either of them might silently disappear, with no user feedback at all. A user needs to make other mistakes, but this could eventually lead to abnormal tx fees.
* A dictionary does not guarantee that keys are sorted. Again, a user needs to keep this in mind, as it could eventually lead to excessive tx fees.
Even though my scenario of loss-of-funds is unlikely to happen, I see it as a inconvenience that should be fixed.
Tree-SHA512: cd562f34f7f9f79c7d3433805971325c388c2035611be283980f4049066a622df4f0afdc11d7ac96662260ec0115147cb65e1ab5268f5a1b063242f3fe425f77
Add update and upgrade commands to enable the installation of the first dependencies on ubuntu xenial. If those are not executed some packages can not be found.
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
cc879675e1 depends: Remove ccache (fanquake)
Pull request description:
After discussion with @theuni, we can possibly just remove ccache from depends entirely.
Related to #12606
Tree-SHA512: ae0a60c8d97467fa41d617daa48ed22159cf32613808634a983304901dd5ed27124e77868d2314004e5144f7b35ba1333f720bb12daec4c5ca03aaf29d593ef2
be8ab7d08 Create new wallet databases as directories rather than files (Russell Yanofsky)
26c06f24e Allow wallet files not in -walletdir directory (Russell Yanofsky)
d8a99f65e Allow wallet files in multiple directories (Russell Yanofsky)
Pull request description:
This change consists of three commits:
* The first commit is a pure refactoring that removes the restriction that two wallets can only be opened at the same time if they are contained in the same directory.
* The second commit removes the restriction that `-wallet` filenames can only refer to files in the `-walletdir` directory.
* The third commit makes second commit a little safer by changing bitcoin to create wallet databases as directories rather than files, so they can be safely backed up.
All three commits should be straightforward:
* The first commit adds around 20 lines of new code and then updates a bunch of function signatures (generally updating them to take plain fs::path parameters, instead of combinations of strings, fs::paths, and objects like CDBEnv and CWalletDBWrapper).
* The second commit removes two `-wallet` filename checks and adds some test cases to the multiwallet unit test.
* The third commit just changes the mapping from specified wallet paths to bdb environment & data paths.
---
**Note:** For anybody looking at this PR for the first time, I think you can skip the comments before _20 Nov_ and start reading at https://github.com/bitcoin/bitcoin/pull/11687#issuecomment-345625565. Comments before _20 Nov_ were about an earlier version of the PR that didn't include the third commit, and then confusion from not seeing the first commit.
Tree-SHA512: 00bbb120fe0df847cf57014f75f1f7f1f58b0b62fa0b3adab4560163ebdfe06ccdfff33b4231693f03c5dc23601cb41954a07bcea9a4919c8d42f7d62bcf6024
08e0855b9 Give hint about gitian not able to download (kallewoof)
Pull request description:
Gitian fails to perform downloads right now on my set up. This can be circumvented by first checking out the tag being built and then doing the depends download step before running `gbuild`.
This should of course be fixed in gitian, but having this note until it's fixed is definitely useful.
Tree-SHA512: ae9d0eb44ecfdae44d35aecc6e5fd6db7d9e95b8e0badc76a1d9aaf8fe70bc00a2914dfcb4f516d030560835af411515ca13736ebf8b49b7040b340457882779
Gitian fails to perform downloads right now on my set up. This can be circumvented by first checking out the tag being built and then doing the depends download step before running `gbuild`.
cfaac2a60 Add build support for 'gprof' profiling. (murrayn)
Pull request description:
Support for profiling build: `./configure --enable-profiling`
Tree-SHA512: ea983cfce385f1893bb4ab7f94ac141b7d620951dc430da3bbc92ae1357fb05521eac689216e66dc87040171a8a57e76dd7ad98036e12a2896cfe5ab544347f0
13a399a46 depends: patch pthread_set_name_np out of zeromq (Cory Fields)
8f7922636 depends: zeromq 4.2.3 (fanquake)
Pull request description:
This is a followup to #9254 and #11981. Zeromq 4.2.3 was released just after #9254 was merged, and contains a years worth of improvements/bug fixes. See the release notes [here](https://github.com/zeromq/libzmq/releases/tag/v4.2.3).
Todo:
- [ ] Add zeromq-4.2.3.tar.gz to /depends-sources on bitcoincore.org
- [ ] Verify gitian builds are still OK
- [ ] Check: https://github.com/zeromq/libzmq/pull/2787
Tree-SHA512: 85e06f47be3e1fdedcee50ce90e3391d69df2ea1c167472ffc3126d8970d418eb75141b970e422eb2fda9a8cad00e6ba5b36afa53565171a9ebaa152a9dc9b60
7eb665fc8 [Trivial] link mentioned scripted-diff-commit (Felix Wolfsteller)
Pull request description:
Make it easier for people who do not operate on a cloned repository to access the example mentioned.
Tree-SHA512: 1c06e551c68cad03e6bd541bf0e0076cdf0b48ef9b8b4e4a61435367c3435e2e4ccb934112e8dc29d3d70217d8834924704aaf839e25d1133312df86848ca1a1
4d14d06fc docs: clarified systemd installation instructions in init.md for Ubuntu users. (DaveFromBinary)
Pull request description:
Added a note to init.md to clarify the .service copy path for Ubuntu because it differs from the described copy path.
Also noted which version of Ubuntu switched to systemd for the default system init to clarify when the systemd installation steps should be used instead of the upstart installation steps for Ubuntu users.
Tree-SHA512: 1ac6143a177d0f3782ff641029d71eb1f3b3be0c1482e266154d3ca093251b58a10a5f037d1cc82dbfaeae058df2bb8e904833ccb88b032f1a59a151724f95e2
fa9461473 [doc] dev-notes: Members should be initialized (MarcoFalke)
Pull request description:
Also, remove mention of threads that were removed long ago.
Motivation:
Make it easier to spot bugs such as #11654 and #12426
Tree-SHA512: 8ca1cb54e830e9368803bd98a8b08c39bf2d46f079094ed7e070b32ae15a6e611ce98d7a614f897803309f4728575e6bc9357fab1157c53d2536417eb8271653
This change should make it easier for users to make complete backups of wallets
because they can now just back up the specified `-wallet=<path>` path directly,
instead of having to back up the specified path as well as the transaction log
directory (for incompletely flushed wallets).
Another advantage of this change is that if two wallets are located in the same
directory, they will now use their own BerkeleyDB environments instead using a
shared environment. Using a shared environment makes it difficult to manage and
back up wallets separately because transaction log files will contain a mix of
data from all wallets in the environment.
Added a note to init.md to clarify the .service copy path for newer versions of Ubuntu because it differs from the described copy path.
Also noted what version of Ubuntu switched to systemd for the default system init.
a777244e4 Build: Add a makefile target for Doxygen documentation (Andrea Comand)
Pull request description:
You can now build the doxygen documentation with `make docs` and clean it with `make clean-docs`.
Fixes: #11949
Tree-SHA512: f2361ec7f771227367dd04bba1a444b44e59f13901463a678a5f2f579a10a56d67db2e29552e754e312a1c472a31593b6af189cbaac5cd351a428c57baf5ace7
9b6454c Improve "Turn Windows Features On or Off" step (Ernest Hemingway)
Pull request description:
Originally, this readme suggests searching for 'turn' to open this dialog but this will not necessarily work on all windows 10 PCs. It's better to use the executable name instead, which is consistent across installations.
Tree-SHA512: e5b95dd69a9a186ea5cd9c7aac2283e77f1857ecf628f8ad6ac0411f362c8aeb52e3bcffb46b90e3bab52f45fa244f269b1777f83d3e0519ac8a95935f7fb5b4
c8edc2c [docs] initial QT documentation, move Qt Creator instructions (Sjors Provoost)
Pull request description:
I'll update this as I figure out how everything is tied together, but I think it's a useful enough start.
Tree-SHA512: d96e5c9ba8ccc3a1b92a0894a8a8449317100eebb14e5d390b51793534458f50eac296cf2945fccf81b85aff23fa32d91d6015a0a76ada4f7091a400d7508ae5
fabb72b contrib: Remove xpired 522739F6 key (MarcoFalke)
faeab66 contrib: Replace developer keys with list of pgp fingerprints (MarcoFalke)
Pull request description:
Having to host a copy of the keys in this repo was a common source of discussion and distraction, caused by problems such as:
* Outdated keys. Unclear whether and when to replace by fresh copies.
* Unclear when to add a key of a new developer or Gitian builder.
The problems are solved by
* Having no keys but only the fingerprints
* Adding a rule of thumb, when to add a new key
<strike>Moving the keys to a different repo solves none of these issues, but since the keys are not bound to releases or git branches of Bitcoin Core, they should live somewhere else.
Obviously, all keys are hosted and distributed on key servers, but were added to the repo solely for convenience and redundancy.
Moving the mirror of those keys to a different repo makes it less distracting to update them -- let's say -- prior to every major release.
I updated our `doc/release-process.md` to reflect the new location.
DEPENDS_ON https://github.com/bitcoin-core/gitian.sigs/pull/621
</strike>
Tree-SHA512: c00795a07603190e26dc4526f6ce11e492fb048dc7ef54b38f859b77dcde25f58ec4449f5cf3f85a5e9c2dd2743bde53f7ff03c8eccf0d75d51784a6b164e47d
eeeb416 Remove suggestion to make cloned repository world-writable for Windows build. (murrayn)
Pull request description:
Current documentation for Windows build on Ubuntu suggests cloning the repository into /usr/src, as root, and making the tree world-writable(!). I can see no problem this solves, and it introduces obvious security issues.
Tree-SHA512: 05429a64319c046f5506f7d27c64c94f94cfe6d14ec5f01dccf843fc417e954fe96e1abc43126b9204a1178f101e4a8da9eece32b5de4b348c7c9358615c7e0f
7444149 Document method for reviewers to verify chainTxData (John Newbery)
Pull request description:
This commit adds the final block hash of the window to getchaintxstats
and documents how reviewers can verify changes to chainTxData.
Tree-SHA512: d16abb5f47d058e52660f4d495f1e453205b1b83716d7c810ff62a70338db721386c1808ec1fc8468f514e4d80cc58e3c96eeb3184cbbcb1d07830fa5e53f342
Master was bumped to 0.16.99, so update the man pages too to avoid
confusion.
Tree-SHA512: 63622d6ebea2fb052ffe05fb80fe08bd627c34310a7ca22b2bc1af74003b20ab1a1fde51746ee69d401379d65232981b68541a9fc7f329e04b854507f836b19e
Also clean out release notes.
Tree-SHA512: c4d5b52c089e14438be37381e1b0dab3711cc72aa8d345d1024169fff0055f3d021c8ca9d46fb794110694ebcbf7cbca0a12619f650873c9d381530adea7100e
Also warn if bitcoind is configured to use a relative -datadir path.
Specifying paths relative to the current working directory in a daemon process
can be dangerous, because files can fail to be located even if the
configuration doesn't change, but the daemon is started up differently.
Specifying a relative -datadir now adds a warning to the debug log. It would
not be backwards-compatible to forbid relative -datadir paths entirely, and it
could also be also inconvenient for command line testing.
Specifying a relative -walletdir now results in a startup error. But since the
-walletdir option is new in 0.16.0, there should be no compatibility issues.
Another reason not to use working directory paths for -walletdir specifically
is that the default -walletdir is a "wallets" subdirectory inside the datadir,
so it could be surprising that setting -walletdir manually would choose a
directory rooted in a completely different location.
97c3cad [docs] Clarify -walletdir usage (John Newbery)
Pull request description:
After discussion with @ryanofsky around #11687 , I think this documentation is a bit clearer for how the new `-walletdir` argument works.
Tree-SHA512: f279cab82524dbc0d75e6f9891f0e228ec4c8d0df3e16f351057fa243ddd263ff786f05383fd00a09b89edcc07dab211be5b64387f77271edf8af0177bcf667d
2be2b5d Remove the ending slashes from RPC URI format. (Jacky C)
Pull request description:
This resolves#11861 (A confusion caused by incorrect information in the release notes).
More information can be found at #11861.
Tree-SHA512: 35f85854b01a84acd5358e0c9deff881205111120277fa7cdf270801933c2603c2ae04fa4d55d233675c7298c2d37cc60c919f89e7e6091f5c61884025775ab0
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
5ec3eae remove brew c++ flag (Pablo Fernandez)
Pull request description:
the c++ is not needed since the listed brew formulas no longer have this option. It also raises a warning that may generate confusion.
Tree-SHA512: 37c0ebee2901947a21abfcd646ae0c7e73293568f37db9b130d1c521aa4222b0e82e21614e6ac60bb5347c34ef15bbd24eb8066ebf576ea3da9f365be9a4d062
6915f93 doc: Update OpenBSD build instructions for 6.2 (Wladimir J. van der Laan)
Pull request description:
(this continues #11442)
There is no more need to install a new compiler. This simplifies instructions a lot.
From discussion with @fanquake on IRC I first wanted to add a new section for 6.2, but that made the document a complex mess. I think it's good enough (and more maintainable too) to only support the most recent release.
Includes #11976.
I moved the "resource limits" section to the end as I didn't seem to need it with clang, but this may vary based on source changes and the phase of the moon so it's good to keep it as optional extra information.
Tree-SHA512: 15794afec6d682323d0aa13c7616d009acb7fce8b0ef5d2106261f2ebd86b7b2fe66040c04860d9bf2f0c1934fbdc2b594b8c09a98accfaac04f3daf9a6cadf3
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
2712742 doc: Update FreeBSD build instructions to use bdb4 (Wladimir J. van der Laan)
d95c83d contrib: FreeBSD compatibility in install_db4.sh (Wladimir J. van der Laan)
c0298b0 contrib: Make X=Y arguments work in install_db4 (Wladimir J. van der Laan)
b798f9b contrib: New clang patch for install_db4 (Wladimir J. van der Laan)
Pull request description:
This PR improves the BSD compatibility of the bdb4 installer script.
See #11921, #11868.
I've tested this on OpenBSD 6.2 (clang) and Ubuntu 16.04 (gcc).
This needs testing on OSX at least, ~~and on gcc/Linux to make sure that applying the patch unconditionally doesn't negatively affect gcc~~.
~~NB: this is not yet sufficient to make `install_db4.sh` work on FreeBSD, as we need to use yet another `sha256` tool there. But it's a step in the right direction.~~
### contrib: New clang patch for install_db4
Replace the clang patch with a new and improved version that also fixes the build issues with OpenBSD and FreeBSD's clang, and apply it unconditionally.
Thanks to @fanquake for finding the patch.
### contrib: Make X=Y arguments work in install_db4
Trailing X=Y arguments are supposed to be passed through unchanged to bdb's configure. This was not the case, at least with OpenBSD 6.2's shell.
Fix this by not storing the arguments in a temporary variable but passing "$@" through directly.
### contrib: FreeBSD compatibility in install_db4.sh
Unfortunately, FreeBSD uses yet another syntax for `sha256`.
Support FreeBSD's syntax too. Using `uname` is a bit of a hack but it works and I found no way to distinguish the two.
Tree-SHA512: 12461a58dfeb4834701891762efc747c8187d834f41d98c8451edee1402a3958c4842bbc02c61bacbc7b0d90cc6b020a2ca158b65304d9760c9f0d2052ff36d4
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
3121d76 doc: Update release notes for share/rpcauth/rpcauth.py rename (Henrik Jonsson)
3fdb297 Rename rpcuser.py to rpcauth.py (Henrik Jonsson)
Pull request description:
This script creates `rpcauth` entries for bitcoin.conf, not the deprecated `rpcuser` entry, so this changes the name of the script to match.
As discussed in #11830.
Tree-SHA512: cd71c2a4043ef1381d3810b057cc83be3fac612df576b91b683ef91fdb7998c534b3b97a3313845eb867dc4bf7cc42a1250474d2261ab3f9ed2f884ca8ebd9f4
543ab40 Docs: Bump OSX version to 10.13 in build-osx.md (Varunram Ganesh)
Pull request description:
Core works fine on macOS 10.13
Tree-SHA512: 44807920e3d5518c98d68191ed614019934bb702df9695389f8178a00a7c5afccd90fad68a07568cdc3e3d04068bddf434942fb81dceb6cbde9bb4ff4e49e425
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
- Added steps to specify required source location for Windows WSL
builds.
- Attempted to make the introduction and options for building on Windows
clearer.
6e4cdd6 [docs] Add reference to install_db4.sh in OS X build instructions (James O'Beirne)
af9103e [build] Add a script for installing db4 (James O'Beirne)
Pull request description:
Instead of maintaining rote instructions for building BerkeleyDB in `doc/build-{unix,openbsd}.md`, reference a script that does the same thing and can be called from unanticipated contexts, e.g. Docker builds.
The script was written with portability in mind, though I haven't tested it on openbsd.
I wasn't sure if we wanted to create a separate directory for this sort of thing (e.g. `contrib/install`) so I just stuck it in `contrib/`; happy to move it around if anyone has another preference.
Tree-SHA512: d2fc83c065d083458c448e6041e5e9ef67f8165974925560a83881d22d1e9448ea3dd4f7a38196800a8cd6dcf206208a2d6d12417bfe094902d4754e4ca67f18
Instead of maintaining not-easily-tested instructions for building BerkeleyDB
in doc/build-unix.md, package the installation as a script in contrib/. This
allows shared usage from a number of contexts, e.g. Docker.
Thanks to @jonasschnelli, @laanwj for feedback.
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
5ff01c236 [docs] Add instructions for lcov coverage report generation (James O'Beirne)
Pull request description:
After rediscovering the `lcov` report generation recipe one too many times, it seemed prudent to write some doc.
Tree-SHA512: 20e1b5f51ecd39e14bd67986a2c1578fb7da03a50625366eaca35b201db66aef99cd4a5456df3aaca5d2d66b18ed7d2e8eb8f3bd9c7aaf9af48164d9bac38931
7383d77 Updated instructions for Windows 10 Fall Creators Update. (Aaron Clauson)
e0fc4a7 Updated Windows build doc for WSL/Xenial workarounds. (Aaron Clauson)
Pull request description:
An update to the Windows build document that provides workarounds for the broken 64 bit mingw32 cross compiler on WSL/Xenial.
This update is an alternative to pull request #11437. While that pull request takes a valid approach by stating building on WSL should be avoided I think it is more useful to give Windows developers a workaround option.
The instructions have been tested on:
- Ubuntu 14.04 and 64 bit mingw32 tool chain
- Ubuntu 16.04 and 64 bit mingw32 tool chain
- Ubuntu 17.04 and 64 bit mingw32 tool chain
- Windows Subsystem for Linux (Windows 10 OS Build 15063.608) and 32 bit mingw32 tool chain
- Windows Subsystem for Linux (Windows 10 OS Build 15063.608) and 64 bit mingw32 tool chain
Related items:
- Serious incompatibility problems w/ newer mingw-64 on Ubuntu #8653
- `-fstack-protector-all` triggers crashes in mingw-w64 5.3.1 #8732
- Windows build appears broken on WSL (buntu okay) #10269
- Compilation error for windows target #11437
Tree-SHA512: 7c937e37ed7120ae5dcf61aba50e5228a7ed6f729647c724b8f48e7cbbd81366c1a83a818618766a8fe0418425e05ba2eba2b14f2616621c58606585444f45fc
659b206 Make listsinceblock refuse unknown block hash (Russell Yanofsky)
Pull request description:
Change suggested by @theuni who noticed listsinceblock would ignore invalid block hashes causing it to return a completely unfiltered list of transactions.
Tree-SHA512: 3c8fb160265780d1334e856e853ab48e2e18372b8f1fc71ae480c3f45317048cc1fee0055d5c58031981a91b9c2bdbeb8e49a889d04ecba61729ce8109f2ce3f
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
This reduces the overhead in the git repo due to binary blobs of
the png files.
Also, the documentation can be updated independent of any tags and
release cycles.
204cc98 fix link error (Shooter)
Pull request description:
The `perform-gitian-builds` is not exist,
replace `perform-gitian-builds` with `setup-and-perform-gitian-builds`.
Tree-SHA512: c4f3fb4b6ae502a2e7a6857d3075734d493f549871b80ec00a2733ee689b00f98aa67ce7c3b7facf1ae4949b7845e1e2ef6f727aeca0c88c00b46d77b4d7e570
90ab62c45 [docs] document scripted-diff (John Newbery)
Pull request description:
Document scripted-diffs in developer-notes.md
I sometimes comment on PRs that a scripted-diff would be appropriate, but I don't have any documentation to point to. Fix that.
Tree-SHA512: 7d4a14b9217c812e4c27601e5e6dd8054cf5104cd20ecbe1ec0a84c217cc4b0645b7c0d2e3a89fdd4d059cafbc388acbddba75a430308f8279200b9383e009de
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
fa65dcd doc: Update release notes for 0.16.0 (MarcoFalke)
fa2c3b6 doc: Bump manpages to 0.15.99 (MarcoFalke)
Pull request description:
This updates the release notes for the breaking changes to `-usehd` option and the `getinfo` rpc.
Also, bumps the manpages to current master.
Tree-SHA512: 55b74375fa680d6043882e3cc37bc655840c9e719d67f60d4d615c10399d570cf6ed4dc338635be80d4044d4ed12cebde1370729ccb6794182e6d9c9910dab04
e91b96192 Create dependencies.md, and link dependencies file from README & build docs (flack)
Pull request description:
As @fanquake mentioned in #8639, this should probably be a file in `doc/`, so I went ahead and pulled the issue text via the github API and dumped it into a file. No modifications made, except one spelling fix. This makes the info easier to find, and it will get a proper version history, too.
Tree-SHA512: 6ba4c37c97200972a74724e0e346d6ad5947c01ad18638e15250f2b4cd747dd744aba16e306c98d59f35736542a5eded7a17b6a5ce6aebc63c0a9dc969b365ef
ce3baa193 changed regtest RPCport to 18443 to avoid conflict with testnet 18332 (Ferdinando M. Ametrano)
Pull request description:
using the same JSON-RPC default port for both testnet and regtest prevents running both at the same time on the same machine. Since RPCport=P2Pport-1 for both mainnet and testnet, and regtest P2Pport being 18444, 18443 is proposed for regtest RPCport
Documentation has been updated (or created where missing); manpages doc/man/bitcoin*.1 could include information for regtest too
Tree-SHA512: d42185f7ef54dc918ece19b543c8681d08bb9c5a971394e21f2d9a1091734b091b08df69fab622c207b46f402cf9323ded5b7a33fbd0af722388930169124e7f
python3 is required for running the unit tests on macOS, Ubuntu and Fedora.
Without python3 installed, 'make check' fails because /test/util/bitcoin-util-test.py fails to find python3.
f1708ef89 Add recommendation: By default, declare single-argument constructors `explicit` (practicalswift)
Pull request description:
This is a follow-up to the now merged #10969.
Add recommendation:
> By default, declare single-argument constructors `explicit`.
>
> - *Rationale*: This is a precaution to avoid unintended conversions that might arise when single-argument constructors are used as implicit conversion functions.
>
Tree-SHA512: 1ceb1008a7863ebd0f09ba9c06b4e28b3b03265d7381f9d0c8bd4be1663d5d0392de0ecd811027aa27c0d962723674b245b3c165a437942a776f3525db39d36b
fa14b67 [doc] build-windows: Mention that only trusty works (MarcoFalke)
Pull request description:
This should prevent people from running into the issues to later find that there is no solution yet.
Tree-SHA512: c0512bb15ebd62113a4195a9577fec4ddacf164509673e178c6b5445c16ab7b110a13ba829e6eebb2a66dff61eeac6ec77f7c5f60bd64685a0c0d99f71f4edf7
745d2e3 Clean up getbalance RPC parameter handling (Russell Yanofsky)
fd5d71e Update developer notes after params.size() cleanup (Russell Yanofsky)
e067673 Avoid treating null RPC arguments different from missing arguments (Russell Yanofsky)
e666efc Get rid of redundant RPC params.size() checks (Russell Yanofsky)
Pull request description:
This is a followup to #10783.
- The first commit doesn't change behavior at all, just simplifies code.
- The second commit just changes RPC methods to treat null arguments the same as missing arguments instead of throwing type errors.
- The third commit updates developer notes after the cleanup.
- The forth commit does some additional code cleanup in `getbalance`.
Followup changes that should happen in future PRs:
- [ ] Replace uses of `.isTrue()` with calls to `.get_bool()` so numbers, objects, and strings cause type errors instead of being interpreted as false. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133850525
- [ ] Add braces around if statements. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133851133
- [ ] Maybe improve UniValue type error exceptions and eliminate RPCTypeCheck and RPCTypeCheckArgument functions. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133829303
Tree-SHA512: e72f696011d20acc0778e996659e41f9426bffce387b29ff63bf59ad1163d5146761e4445b2b9b9e069a80596a57c7f4402b75a15d5d20f69f775ae558cf67e9
bea8e9e Document the preference of nullptr over NULL or (void*)0 (practicalswift)
Pull request description:
Document the preference of `nullptr` over `NULL` or `(void*)0`.
After this commit:
```
$ git grep "[^A-Za-z_]NULL[^A-Za-z_]" | grep -vE '(leveldb|univalue|secp256k1|torcontrol|NULL certificates|ctaes|release-notes|patches|configure.ac|developer-notes)'
$
```
Some context:
* `NULL → nullptr` was handled in the recently merged PR #10483
* `0 → nullptr` was handled in the recently merged PR #10645
Tree-SHA512: f863096aa4eb21705910f89713ca9cc0d83c6df2147e3d3530c3e1589b96f6c68de8755dcf37d8ce99ebda3cfb69805e00eab13bf65424aaf16170e9dda3958a
