After discussion in #7164 I think this is better.
Max tip age was introduced in #5987 to make it possible to run
testnet-in-a-box. But associating this behavior with the testnet chain
is wrong conceptually, as it is not needed in normal usage.
Should aim to make testnet test the software as-is.
Replace it with a (debug) option `-maxtipage`, which can be
specified only in the specific case.
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
a46f87f Initialize logging before we do parameter interaction (Jonas Schnelli)
df66147 Move -blocksonly parameter interaction to the new ParameterInteraction() function (Jonas Schnelli)
68354e7 [QT] Call inits parameter interaction before we create the options model (Jonas Schnelli)
411b05a Refactor parameter interaction, call it before AppInit2() (Jonas Schnelli)
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
This continues/fixes #6719.
`event_base_loopbreak` was not doing what I expected it to, at least in
libevent 2.0.21.
What I expected was that it sets a timeout, given that no other pending
events it would exit in N seconds. However, what it does was delay the
event loop exit with 10 seconds, even if nothing is pending.
Solve it in a different way: give the event loop thread time to exit
out of itself, and if it doesn't, send loopbreak.
This speeds up the RPC tests a lot, each exit incurred a 10 second
overhead, with this change there should be no shutdown overhead in the
common case and up to two seconds if the event loop is blocking.
As a bonus this breaks dependency on boost::thread_group, as the HTTP
server minds its own offspring.
58ef0ff doc: update docs for Tor listening (Wladimir J. van der Laan)
68ccdc4 doc: Mention Tor listening in release notes (Wladimir J. van der Laan)
09c1ae1 torcontrol improvements and fixes (Wladimir J. van der Laan)
2f796e5 Better error message if Tor version too old (Peter Todd)
8f4e67f net: Automatically create hidden service, listen on Tor (Wladimir J. van der Laan)
- Force AUTHCOOKIE size to be 32 bytes: This provides protection against
an attack where a process pretends to be Tor and uses the cookie
authentication method to nab arbitrary files such as the
wallet
- torcontrol logging
- fix cookie auth
- add HASHEDPASSWORD auth, fix fd leak when fwrite() fails
- better error reporting when cookie file is not ok
- better init/shutdown flow
- stop advertizing service when disconnected from tor control port
- COOKIE->SAFECOOKIE auth
69d373f Don't wipe the sigcache in TestBlockValidity (Pieter Wuille)
0b9e9dc Evict sigcache entries that are seen in a block (Pieter Wuille)
830e3f3 Make sigcache faster and more efficient (Pieter Wuille)
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
6342a48 Init: Use DEFAULT_TRANSACTION_MINFEE in help message (MarcoFalke)
a9c73a1 [wallet] Add comments for doxygen (MarcoFalke)
6b0e622 [wallet] Refactor to use new MIN_CHANGE (MarcoFalke)
a6efc01 Bugfix: Omit wallet-related options from -help when wallet is disabled (Luke Dashjr)
5f9260f Bugfix: If genproclimit is omitted to RPC setgenerate, don't change it; also show correct default in getmininginfo (Luke Dashjr)
420a82f Bugfix: Describe dblogsize option correctly (it refers to the wallet database, not memory pool) (Luke Dashjr)
caa3d42 Bugfix: RPC: blockchain: Display correct defaults in help for verifychain method (Luke Dashjr)
Moves the call Initialize() from init.cpp to CreateWithArguments() and handles the
return value. Moves the call Shutdown() from init.cpp to destructor.
Changes Initialize() and Shutdown() to protected members.
* -maxuploadtarget can be set in MiB
* if <limit> - ( time-left-in-24h-cycle / 600 * MAX_BLOCK_SIZE ) has reach, stop serve blocks older than one week and filtered blocks
* no action if limit has reached, no guarantee that the target will not be surpassed
* add outbound limit informations to rpc getnettotals
After each transaction which is added to mempool, we first call
Expire() to remove old transactions, then throwing away the
lowest-feerate transactions.
After throwing away transactions by feerate, we set the minimum
relay fee to the maximum fee transaction-and-dependant-set we
removed, plus the default minimum relay fee.
After the next block is received, the minimum relay fee is allowed
to decrease exponentially. Its halflife defaults to 12 hours, but
is decreased to 6 hours if the mempool is smaller than half its
maximum size, and 3 hours if the mempool is smaller than a quarter
its maximum size.
The minimum -maxmempool size is 40*-limitdescendantsize, as it is
easy for an attacker to play games with the cheapest
-limitdescendantsize transactions. -maxmempool defaults to 300MB.
This disables high-priority transaction relay when the min relay
fee adjustment is >0 (ie when the mempool is full). When the relay
fee adjustment drops below the default minimum relay fee / 2 it is
set to 0 (re-enabling priority-based free relay).
(note the 9x multiplier on (void*)'s for CTxMemPool::DynamicMemoryUsage
was accidentally introduced in 5add7a7 but should have waited for this
commit which adds the extra index)
ddf98d1 Make RPC tests cope with server-side timeout between requests (Wladimir J. van der Laan)
2190ea6 rpc: Split option -rpctimeout into -rpcservertimeout and -rpcclienttimeout (Wladimir J. van der Laan)
8b2d6ed http: Disable libevent debug logging, if not explicitly enabled (Wladimir J. van der Laan)
5ce43da init: Ignore SIGPIPE (Wladimir J. van der Laan)
The two timeouts for the server and client, are essentially different:
- In the case of the server it should be a lower value to avoid clients
clogging up connection slots
- In the case of the client it should be a high value to accomedate slow
responses from the server, for example for slow queries or when the
lock is contended
Split the options into `-rpcservertimeout` and `-rpcclienttimeout` with
respective defaults of 30 and 900.
Associate with each CTxMemPoolEntry all the size/fees of descendant
mempool transactions. Sort mempool by max(feerate of entry, feerate
of descendants). Update statistics on-the-fly as transactions enter
or leave the mempool.
Also add ancestor and descendant limiting, so that transactions can
be rejected if the number or size of unconfirmed ancestors exceeds
a target, or if adding a transaction would cause some other mempool
entry to have too many (or too large) a set of unconfirmed in-
mempool descendants.
Ignore SIGPIPE on all non-win32 OSes, otherwise an unexpectedly disconnecting
RPC client will terminate the application. This problem was introduced
with the libhttp-based RPC server.
Fixes#6660.
Continues Johnathan Corgan's work.
Publishing multipart messages
Bugfix: Add missing zmq header includes
Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
Lets nodes advertise that they offer bloom filter support explicitly.
The protocol version bump allows SPV nodes to assume that NODE_BLOOM is
set if NODE_NETWORK is set for pre-70011 nodes.
Also adds an option to turn bloom filter support off for nodes which
advertise a version number >= 70011. Nodes attempting to use bloom
filters on such protocol versions are banned, and a later upgade
should drop nodes of an older version which attempt to use bloom
filters.
Much code stolen from Peter Todd.
Implements BIP 111
d528025 Revert "rpc-tests: re-enable rpc-tests for Windows" (Wladimir J. van der Laan)
1e700c9 doc: update deps in build-unix.md after libevent (Wladimir J. van der Laan)
26c9b83 Move windows socket init to utility function (Wladimir J. van der Laan)
4be0b08 libevent: Windows reuseaddr workaround in depends (Cory Fields)
3a174cd Fix race condition between starting HTTP server thread and setting EventBase() (Wladimir J. van der Laan)
6d2bc22 Document options for new HTTP/RPC server in --help (Wladimir J. van der Laan)
be33f3f Implement RPCTimerHandler for Qt RPC console (Wladimir J. van der Laan)
57d85d9 doc: mention SSL support dropped for RPC in release notes (Wladimir J. van der Laan)
40b556d evhttpd implementation (Wladimir J. van der Laan)
ee2a42b tests: GET requests cannot have request body, use POST in rest.py (Wladimir J. van der Laan)
6e996d3 tests: fix qt payment test (Cory Fields)
3140ef9 build: build-system changes for libevent (Wladimir J. van der Laan)
a9af234 libevent: add depends (Cory Fields)
6a21dd5 Remove rpc_boostasiotocnetaddr test (Wladimir J. van der Laan)
8f9301c qa: Remove -rpckeepalive tests from httpbasics (Wladimir J. van der Laan)
51fcfc0 doc: remove documentation for rpcssl (Wladimir J. van der Laan)
Split StartHTTPServer into InitHTTPServer and StartHTTPServer to give
clients a window to register their handlers without race conditions.
Thanks @ajweiss for figuring this out.
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
Move mempool rejections to debug category `mempoolrej`, to make it possible
to show them without enabling the entire category `mempool` which is
high volume.
7b79cbd limit total length of user agent comments (Pavol Rusnak)
557f8ea implement uacomment config parameter which can add comments to user agent as per BIP-0014 (Pavol Rusnak)
Previously various user-facing strings have used inconsistent currency units "BTC",
"btc" and "bitcoins". This adds a single constant and uses it for each reference to
the currency unit.
Also adds a description of the unit for --maxtxfee, and adds the missing "amount"
field description to the (deprecated) move RPC command.
Fixes#2007
This checks to see if the system clock appears to be bad and gives a
helpful error message. If the user's clock is set incorrectly, hopefully
they'll abort, fix it, and then save themselves a fruitless resync.
Introduce a PlatformStyle to handle platform-specific customization of
the UI.
This replaces 'scicon', as well as #ifdefs to determine whether to place
icons on buttons.
The selected PlatformStyle defaults to the platform that the application
was compiled on, but can be overridden from the command line with
`-uiplatform=<x>`.
Also fixes the warning from #6328.
Prevents stomping on debug logs in datadirs that are locked by other
instances and lost parameter interaction messages that can get wiped by
ShrinkDebugFile().
The log is now opened explicitly and all emitted messages are buffered
until this open occurs. The version message and log cut have also been
moved to the earliest possible sensible location.
To determine the default for `-par`, the number of script verification
threads, use [boost:🧵:physical_concurrency()](http://www.boost.org/doc/libs/1_58_0/doc/html/thread/thread_management.html#thread.thread_management.thread.physical_concurrency)
which counts only physical cores, not virtual cores.
Virtual cores are roughly a set of cached registers to avoid context
switches while threading, they cannot actually perform work, so spawning
a verification thread for them could even reduce efficiency and will put
undue load on the system.
Should fix issue #6358, as well as some other reported system overload
issues, especially on Intel processors.
The function was only introduced in boost 1.56, so provide a utility
function `GetNumCores` to fall back for older Boost versions.
New, undocumented-on-purpose -mocktime=timestamp command-line
argument to startup with mocktime set. Needed because
time-related blockchain sanity checks are done on startup, before a
test has a chance to make a setmocktime RPC call.
And changed the setmocktime RPC call so calling it will not result in
currently connected peers being disconnected due to inactivity timeouts.
Make it possible to opt-out of the centralized alert system by providing
an option `-noalerts` or `-alerts=0`. The default remains unchanged.
This is a gentler form of #6260, in which I went a bit overboard by
removing the alert system completely.
I intend to add this to the GUI options in another pull after this.
This sets aside a number of connection slots for whitelisted peers,
useful for ensuring your local users and miners can always get in,
even if your limit on inbound connections has already been reached.
Simplify and make the code in AppInit2 more clear.
This provides a straightforward flow, gets rid of .count() (which makes
it possible to override an earlier provided proxy option to nothing), as
well as comments the different cases.
Do not translate -help-debug options, Many technical terms, and
only a very small audience, so is unnecessary stress to translators.
Brings the code up to date with translation string policy in
`doc/translation_strings_policy.md`.
Also remove no-longer-relevant "In this mode -genproclimit controls how
many blocks are generated immediately." (as of #5957) from regtest help.
The partition checking code was using chainActive timestamps
to detect partitioning; with headers-first syncing, it should use
(and with this pull request, does use) pIndexBestHeader timestamps.
Fixes issue #6251
In some corner cases, it may be possible for recent blocks to end up in
the same block file as much older blocks. Previously, the pruning code
would stop looking for files to remove upon first encountering a file
containing a block that cannot be pruned, now it will keep looking for
candidate files until the target is met and all other criteria are
satisfied.
This can result in a noncontiguous set of block files (by number) on
disk, which is fine except for during some reindex corner cases, so
make reindex preparation smarter such that we keep the data we can
actually use and throw away the rest. This allows pruning to work
correctly while downloading any blocks needed during the reindex.
aa41bc8 Update help message to match the #4219 change (lpescher)
f60bb5e Update documentation to match the #4219 change (lpescher)
cb87386 Make command line option to show all debugging consistent with similar options (lpescher)
To protect privacy, do not use UPNP when a proxy is set. The user may
still specify -listen=1 to listen locally (for a hidden service), so
don't rely on this happening through -listen.
Fixes#2927.
86a5f4b Relocate calls to CheckDiskSpace (Alex Morcos)
67708ac Write block index more frequently than cache flushes (Pieter Wuille)
b3ed423 Cache tweak and logging improvements (Pieter Wuille)
fc684ad Use accurate memory for flushing decisions (Pieter Wuille)
046392d Keep track of memory usage in CCoinsViewCache (Pieter Wuille)
540629c Add memusage.h (Pieter Wuille)
Create a monitoring task that counts how many blocks have been found in the last four hours.
If very few or too many have been found, an alert is triggered.
"Very few" and "too many" are set based on a false positive rate of once every fifty years of constant running with constant hashing power, which works out to getting 5 or fewer or 48 or more blocks in four hours (instead of the average of 24).
Only one alert per day is triggered, so if you get disconnected from the network (or are being Sybil'ed) -alertnotify will be triggered after 3.5 hours but you won't get another -alertnotify for 24 hours.
Tested with a new unit test and by running on the main network with -debug=partitioncheck
Run test/test_bitcoin --log_level=message to see the alert messages:
WARNING: check your network connection, 3 blocks received in the last 4 hours (24 expected)
WARNING: abnormally high number of blocks generated, 60 blocks received in the last 4 hours (24 expected)
The -debug=partitioncheck debug.log messages look like:
ThreadPartitionCheck : Found 22 blocks in the last 4 hours
ThreadPartitionCheck : likelihood: 0.0777702
Instead of only checking height to decide whether to disable script checks,
actually check whether a block is an ancestor of a checkpoint, up to which
headers have been validated. This means that we don't have to prevent
accepting a side branch anymore - it will be safe, just less fast to
do.
We still need to prevent being fed a multitude of low-difficulty headers
filling up our memory. The mechanism for that is unchanged for now: once
a checkpoint is reached with headers, no headers chain branching off before
that point are allowed anymore.
a8cdaf5 checkpoints: move the checkpoints enable boolean into main (Cory Fields)
11982d3 checkpoints: Decouple checkpoints from Params (Cory Fields)
6996823 checkpoints: make checkpoints a member of CChainParams (Cory Fields)
9f13a10 checkpoints: store mapCheckpoints in CCheckpointData rather than a pointer (Cory Fields)
Connecting the chain can take quite a while.
All the while it is still showing `Loading wallet...`.
Add an init message to inform the user what is happening.
libsecp256k1's API changed, so update key.cpp to use it.
Libsecp256k1 now has explicit context objects, which makes it completely thread-safe.
In turn, keep an explicit context object in key.cpp, which is explicitly initialized
destroyed. This is not really pretty now, but it's more efficient than the static
initialized object in key.cpp (which made for example bitcoin-tx slow, as for most of
its calls, libsecp256k1 wasn't actually needed).
This also brings in the new blinding support in libsecp256k1. By passing in a random
seed, temporary variables during the elliptic curve computations are altered, in such
a way that if an attacker does not know the blind, observing the internal operations
leaks less information about the keys used. This was implemented by Greg Maxwell.
This adds a -prune=N option to bitcoind, which if set to N>0 will enable block
file pruning. When pruning is enabled, block and undo files will be deleted to
try to keep total space used by those files to below the prune target (N, in
MB) specified by the user, subject to some constraints:
- The last 288 blocks on the main chain are always kept (MIN_BLOCKS_TO_KEEP),
- N must be at least 550MB (chosen as a value for the target that could
reasonably be met, with some assumptions about block sizes, orphan rates,
etc; see comment in main.h),
- No blocks are pruned until chainActive is at least 100,000 blocks long (on
mainnet; defined separately for mainnet, testnet, and regtest in chainparams
as nPruneAfterHeight).
This unsets NODE_NETWORK if pruning is enabled.
Also included is an RPC test for pruning (pruning.py).
Thanks to @rdponticelli for earlier work on this feature; this is based in
part off that work.
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
This is an advanced feature which will disable any kind of automatic
transaction broadcasting in the wallet. This gives the user full control
of how the transaction is sent.
For example they can broadcast new transactions through some other
mechanism themselves, after getting the transaction hex through `gettransaction`.
This just adds the option `-walletbroadcast=<0,1>`. Right now these
transactions will get the status
Status: conflicted, has not been successfully broadcast yet
They shouldn't be shown as conflicted at all (`walletconflicts` is empty). This status
will go away when the transaction is received through the network.
This adds a -checkblockindex (defaulting to true for regtest), which occasionally
does a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive, and
mapBlocksUnlinked.
. Closes the bug from commit e179eb3d9b
("bitcoin-qt -help" did not show any message)
. Move all the options in init.cpp (there were already some
options related to bitcoin-qt)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format works even if the translation of the strings
modifies the lenght of the message.
Sqashed 6 commits in a single one.
Help messages correctly formatted for SVGA text mode (132 chars)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format should work even if the translation of the strings
modifies the lenght of the message.
Fix - syntax error
Correct formatting for 79 chars
Correctly based on C++ functions
Removed spare spaces from option strings
Fix - syntax error
Rebased by @laanwj:
- update for RPC methods added since 84d13ee: setmocktime,
invalidateblock, reconsiderblock. Only the first, setmocktime, required a change,
the other two are thread safe.
This avoids a regression for issues like #334 where high speed
repeated connections eventually run the HTTP client out of
sockets because all of theirs end up in time_wait.
Maybe the trade-off here is suboptimal, but if both choices will
fail then we prefer fewer changes until the root cause is solved.
It turns out that some miners have been staying with old versions of
Bitcoin Core because their software behaves poorly with persistent
connections and the Bitcoin Core thread and connection limits.
What happens is that underlying HTTP libraries leave connections open
invisibly to their users and then the user runs into the default four
thread limit. This looks like Bitcoin Core is unresponsive to RPC.
There are many things that should be improved in Bitcoin Core's behavior
here, e.g. supporting more concurrent connections, not tying up threads
for idle connections, disconnecting kept-alive connections when limits
are reached, etc. All are fairly big, risky changes.
Disabling keep-alive is a simple workaround. It's often not easy to turn
off the keep-alive support in the client where it may be buried in some
platform library.
If you are one of the few who really needs persistent connections you
probably know that you want them and can find a switch; while if you
don't and the misbehavior is hitting you it is hard to discover the
source of your problems is keepalive related. Given that it is best
to default to off until they're handled better.
Previously the minRelayTxFee was only enforced on user specified values.
It was possible for smartfee to produce a fee below minRelayTxFee which
would just result in the transaction getting stuck because it can't be
relayed.
This also introduces a maxtxfee option which sets an absolute maximum
for any fee created by the wallet, with an intention of increasing
user confidence that the automatic fees won't burn them. This was
frequently a concern even before smartfees.
If the configured fee policy won't even allow the wallet to meet the relay
fee the transaction creation may be aborted.
There are 3 pieces of data that are maintained on disk. The actual block
and undo data, the block index (which can refer to positions on disk),
and the chainstate (which refers to the best block hash).
Earlier, there was no guarantee that blocks were written to disk before
block index entries referring to them were written. This commit introduces
dirty flags for block index data, and delays writing entries until the actual
block data is flushed.
With this stricter ordering in writes, it is now safe to not always flush
after every block, so there is no need for the IsInitialBlockDownload()
check there - instead we just write whenever enough time has passed or
the cache size grows too large. Also updating the wallet's best known block
is delayed until this is done, otherwise the wallet may end up referring to an
unknown block.
In addition, only do a write inside the block processing loop if necessary
(because of cache size exceeded). Otherwise, move the writing to a point
after processing is done, after relaying.
Previously -proxy was not setting the proxy for IsLimited networks, so
if you set your configuration to be onlynet=tor you wouldn't get an
IPv4 proxy set.
The payment protocol gets its proxy configuration from the IPv4 proxy,
and so it would experience a connection leak.
This addresses issue #5355 and also clears up a cosmetic bug where
getinfo proxy output shows nothing when onlynet=tor is set.
- use __func__ instead of hard-coded function name for logging
- update -discover help message to reflect newly added parameter
interaction
- use DEFAULT_LISTEN in a parameter interaction check instead a hard coded
value
This is a simplified re-do of closed pull #3088.
This patch eliminates the privacy and reliability problematic use
of centralized web services for discovering the node's addresses
for advertisement.
The Bitcoin protocol already allows your peers to tell you what
IP they think you have, but this data isn't trustworthy since
they could lie. So the challenge is using it without creating a
DOS vector.
To accomplish this we adopt an approach similar to the one used
by P2Pool: If we're announcing and don't have a better address
discovered (e.g. via UPNP) or configured we just announce to
each peer the address that peer told us. Since peers could
already replace, forge, or drop our address messages this cannot
create a new vulnerability... but if even one of our peers is
giving us a good address we'll eventually make a useful
advertisement.
We also may randomly use the peer-provided address for the
daily rebroadcast even if we otherwise have a seemingly routable
address, just in case we've been misconfigured (e.g. by UPNP).
To avoid privacy problems, we only do these things if discovery
is enabled.
This is less surprising.
Avoids the overload-the-CPU default of using N threads for script
verification as well as N threads for generation where N is number of cores.
Start the RPC server before doing all the (expensive) startup
initialisations like loading the block index. Until the node is ready,
return all calls immediately with a new error signalling "in warmup"
with an appropriate status message (similar to the init message).
This is useful for RPC clients to know that the server is there (e. g.,
they don't have to start it) but not yet available. It is used in
Namecoin and Huntercoin already for some time, and there exists a UI
hooked onto the RPC interface that actively uses this to its advantage.
a873823 CAutoFile: Explicit Get() and remove unused methods (Wladimir J. van der Laan)
fef24ca Add IsNull() to class CAutoFile and remove operator ! (Ruben Dario Ponticeli)
c0195b1 Bugfix: Remove default from -zapwallettxes description (inaccurate) (Luke Dashjr)
0a08aa8 Parameterise command line option defaults, so translations are independent of them (Luke Dashjr)
Previous refactorings broke the ability to rebuild the chainstate by deleting the chainstate
directory, resulting in an incorrect "Incorrect or no genesis block found" error message. Fix
that.
Also, improve the performance of ActivateBestBlockStep by using the skiplist to only discover
a few potential blocks to connect at a time, instead of all blocks forever - as we likely bail
out after connecting a single one anyway.
7c70438 Get rid of the dummy CCoinsViewCache constructor arg (Pieter Wuille)
ed27e53 Add coins_tests with a large randomized CCoinViewCache test. (Pieter Wuille)
058b08c Do not keep fully spent but unwritten CCoins entries cached. (Pieter Wuille)
c9d1a81 Get rid of CCoinsView's SetCoins and SetBestBlock. (Pieter Wuille)
f28aec0 Use ModifyCoins instead of mutable GetCoins. (Pieter Wuille)
- explicit init of pcoinsdbview and pwalletMain (even if not needed, as
globals are init to NULL, it seems cleaner)
- remove check if (pwalletMain) in Shutdown() as delete is valid even if
pwalletMain is NULL
Always make a pid file, not only when `-daemon` specified.
This is useful for troubleshooting, for attaching debuggers and loggers
and such.
- Write the pid file only after the datadir lock was acquired
- Don't create or remove a pid file on WIN32, and also don't show the option
There is no reason to store thousands of orphan transactions;
normally an orphan's parents will either be broadcast or
mined reasonably quickly.
This pull drops the maximum number of orphans from 10,000 down
to 100, and adds a command-line option (-maxorphantx) that is
just like -maxorphanblocks to override the default.
Flushing after every line when printing to console is desirable when
running with systemd but setvbuf() has slightly different semantics
on Windows that causes warnings. Just do an explicit fflush() after
each line print to console instead.
Bypassing the main coins cache allows more thorough checking with the same
memory budget.
This has no effect on performance because everything ends up in the child
cache created by VerifyDB itself.
It has bugged me ever since #4675, which effectively reduced the
number of checked blocks to reduce peak memory usage.
- Pass the coinsview to use as argument to VerifyDB
- This also avoids that the first `pcoinsTip->Flush()` after VerifyDB
writes a large slew of unchanged coin records back to the database.
Split up util.cpp/h into:
- string utilities (hex, base32, base64): no internal dependencies, no dependency on boost (apart from foreach)
- money utilities (parsesmoney, formatmoney)
- time utilities (gettime*, sleep, format date):
- and the rest (logging, argument parsing, config file parsing)
The latter is basically the environment and OS handling,
and is stripped of all utility functions, so we may want to
rename it to something else than util.cpp/h for clarity (Matt suggested
osinterface).
Breaks dependency of sha256.cpp on all the things pulled in by util.
aa82795 Add detailed network info to getnetworkinfo RPC (Wladimir J. van der Laan)
075cf49 Add GetNetworkName function (Wladimir J. van der Laan)
c91a947 Add IsReachable(net) function (Wladimir J. van der Laan)
60dc8e4 Allow -onlynet=onion to be used (Wladimir J. van der Laan)
This commit adds per-network information to the
getnetworkinfo RPC call:
- Is the network limited?
- Is the network reachable
- Which proxy is used for this network, if any
Inspired by #2575.
* Replace -benchmark (and the related fBenchmark) with a regular debug option, -debug=bench.
* Increase coverage and granularity of individual block processing steps.
* Add cummulative times.
First and foremost, this defaults to OFF.
This option lets a node consider such transactions non-standard,
meaning they will not be relayed or mined by default, but other miners
are free to mine these as usual.
The option is only effective for either wallet-less builds or if
-disablewallet is specified as well.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 34d5fc0 4e1a196 bd4307b d53a33b 7e09b36
Github-Pull: #4286
This adds a -whitelist option to specify subnet ranges from which peers
that connect are whitelisted. In addition, there is a -whitebind option
which works like -bind, except peers connecting to it are also
whitelisted (allowing a separate listen port for trusted connections).
Being whitelisted has two effects (for now):
* They are immune to DoS disconnection/banning.
* Transactions they broadcast (which are valid) are always relayed,
even if they were already in the mempool. This means that a node
can function as a gateway for a local network, and that rebroadcasts
from the local network will work as expected.
Whitelisting replaces the magic exemption localhost had for DoS
disconnection (local addresses are still never banned, though), which
implied hidden service connects (from a localhost Tor node) were
incorrectly immune to DoS disconnection as well. This old
behaviour is removed for that reason, but can be restored using
-whitelist=127.0.0.1 or -whitelist=::1 can be specified. -whitebind
is safer to use in case non-trusted localhost connections are expected
(like hidden services).
- small changes to Shutdown(), buffer __func__, which is now used in
all LogPrintf() calls and format for better readability
- order using namespace alpabetically
The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
-respendnotify=<cmd> Execute command when a network tx respends wallet
tx input (%s=respend TxID, %t=wallet TxID)
Add respendsobserved array to gettransaction, listtransactions, and
listsinceblock RPCs. This omits the malleated clones that are included
in the walletconflicts array.
Add RPC help for respendsobserved and walletconflicts (help was missing
for the latter).
Allows network wallets and other clients to see transactions that respend
a prevout already spent in an unconfirmed transaction in this node's mempool.
Knowledge of an attempted double-spend is of interest to recipients of the
first spend. In some cases, it will allow these recipients to withhold
goods or services upon being alerted of a double-spend that deprives them
of payment.
As before, respends are not added to the mempool.
Anti-Denial-of-Service-Attack provisions:
- Use a bloom filter to relay only one respend per mempool prevout
- Rate-limit respend relays to a default of 100 thousand bytes/minute
- Define tx2.IsEquivalentTo(tx1): equality when scriptSigs are not considered
- Do not relay these equivalent transactions
Remove an unused variable declaration in txmempool.cpp.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
Adds a copyright and attribution message to the `-version` output
(the same as shown in the About dialog in the GUI).
Move the message to a function LicenseInfo in init.cpp.
- add DEFAULT_LISTEN in net.h and use in the code (shared
setting between core and GUI)
Important: This makes it obvious, that we need to re-think the
settings/options handling, as GUI settings are processed before
any parameter-interaction (which is mostly important for network
stuff) in AppInit2()!
f0a83fc Use Params().NetworkID() instead of TestNet() from the payment protocol (jtimon)
2871889 net.h was using std namespace through chainparams.h included in protocol.h (jtimon)
c8c52de Replace virtual methods with static attributes, chainparams.h depends on protocol.h instead of the other way around (jtimon)
a3d946e Get rid of TestNet() (jtimon)
6fc0fa6 Add RPCisTestNet chain parameter (jtimon)
cfeb823 Add RequireStandard chain parameter (jtimon)
21913a9 Add AllowMinDifficultyBlocks chain parameter (jtimon)
d754f34 Move majority constants to chainparams (jtimon)
8d26721 Get rid of RegTest() (jtimon)
cb9bd83 Add DefaultCheckMemPool chain parameter (jtimon)
2595b9a Add DefaultMinerThreads chain parameter (jtimon)
bfa9a1a Add MineBlocksOnDemand chain parameter (jtimon)
1712adb Add MiningRequiresPeers chain parameter (jtimon)
New RPC methods: return an estimate of the fee (or priority) a
transaction needs to be likely to confirm in a given number of
blocks.
Mike Hearn created the first version of this method for estimating fees.
It works as follows:
For transactions that took 1 to N (I picked N=25) blocks to confirm,
keep N buckets with at most 100 entries in each recording the
fees-per-kilobyte paid by those transactions.
(separate buckets are kept for transactions that confirmed because
they are high-priority)
The buckets are filled as blocks are found, and are saved/restored
in a new fee_estiamtes.dat file in the data directory.
A few variations on Mike's initial scheme:
To estimate the fee needed for a transaction to confirm in X buckets,
all of the samples in all of the buckets are used and a median of
all of the data is used to make the estimate. For example, imagine
25 buckets each containing the full 100 entries. Those 2,500 samples
are sorted, and the estimate of the fee needed to confirm in the very
next block is the 50'th-highest-fee-entry in that sorted list; the
estimate of the fee needed to confirm in the next two blocks is the
150'th-highest-fee-entry, etc.
That algorithm has the nice property that estimates of how much fee
you need to pay to get confirmed in block N will always be greater
than or equal to the estimate for block N+1. It would clearly be wrong
to say "pay 11 uBTC and you'll get confirmed in 3 blocks, but pay
12 uBTC and it will take LONGER".
A single block will not contribute more than 10 entries to any one
bucket, so a single miner and a large block cannot overwhelm
the estimates.
Use CFeeRate instead of an int64_t for quantities that are
fee-per-size.
Helps prevent unit-conversion mismatches between the wallet,
relaying, and mining code.
Previously if bitcoind is linked with an OpenSSL which is compiled
without EC support, this is seen as an assertion failure "pKey !=
NULL" at key.cpp:134, which occurs after several seconds. It is an
esoteric piece of knowledge to interpret this as "oops, I linked
with the wrong OpenSSL", and because of the delay it may not even
be noticed.
The new output is
: OpenSSL appears to lack support for elliptic curve cryptography. For
more information, visit
https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries
: Initialization sanity check failed. Bitcoin Core is shutting down.
which occurs immediately after attempted startup.
This also blocks in an InitSanityCheck() function which currently only
checks for EC support but should eventually do more. See #4081.
Add -rpcbind command option to specify binding RPC service on one
or multiple specific interfaces.
Functionality if -rpcbind is not specified remains the same as before:
- If no -rpcallowip specified, bind on localhost
- If no -rpcbind specified, bind on any interface
Implements part of #3111.
Size specifiers are no longer needed now that we use typesafe tinyformat
for string formatting, instead of the system's sprintf.
No functional changes.
This continues the work in #3735.
The year is 2014. All supported operating systems have IPv6 support,
most certainly at build time (this doesn't mean that IPv6 is configured,
of course).
If noone is exercising the functionality to disable it, that means it
doesn't get tested, and IMO it's better to get rid of it.
(it's also not used consistently in RPC/boost and Net code...)
Prints the actual version of BerkeleyDB that is linked against, if
wallet support is enabled.
Useful for troubleshooting.
For example:
2014-05-01 07:44:02 Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2014-05-01 07:54:25 Using BerkeleyDB version Berkeley DB 5.1.29: (October 25, 20 11)
- introduce DEFAULT_SCRIPTCHECK_THREADS in main.h
- only show values from -"MAX_HW_THREADS" up to 16 for -par, as it
makes no sense to try to leave more "cores free" than the system
supports anyway
- use the new constant in optionsdialog and remove defaults from
.ui file
