e9a78e9b3b doc: Change documentation for =0 for non-boolean options (Wladimir J. van der Laan)
Pull request description:
PR #12713 changed the interpretation for negation of non-boolean options (e.g. -noconnect) to no longer set the option to `0`, but to remove it from the options.
I think this is better because it gets rid of the special meaning of `'0'`.
However it needs to be documented. I attempt to do so in this PR.
Addresses #14064.
There might be options I missed, please help check:
- `-connect`
- `-proxy`
- `-onion`
- `-debug`
- `-debuglogfile`
Needs a manpage update.
Tree-SHA512: a69e63e04a6c8bf6f61a58ddc0f5ebd4b9af7a2e0ea5174e668f2e3edd31a541910a125605ca4bfccf3aca6e59267d98a66de9d1e73650f48c8a1828d315d35d
341f7c7b0e macOS fix: Check for correct version of flake8 to avoid spurious warnings. The brew installed flake8 version is Python 2 based and does not work. (practicalswift)
908a559f33 macOS fix: Add excludes for checks added in the newer shellcheck version installed by brew (practicalswift)
ec4d57bbb3 macOS fix: Work around empty (sub)expression error when using BSD grep (practicalswift)
b57d7d92fe macOS fix: Avoid mapfile due to ancient version of bash shipped with macOS (practicalswift)
Pull request description:
The linters are thoroughly tested under Ubuntu which is what we use in Travis. When reading #14041 I understood that some developers were experiencing problems when running the linters on their local machines.
Assuming these local machines were running macOS I installed a fresh macOS VM, followed the instructions in `build-osx.md` and ran the linters.
This PR contains the changes needed to make `lint-all.sh` run as expected.
Ideally the linters would continuously run also under a Travis macOS environment to make sure we catch these kind of issues before merge.
Tree-SHA512: b39c9a970d14d27db1fb592539923c0bc676b5217f415d02fda3f17bf54d46faa172376e8a3ecab07ca68a3acba9aebe00b2b1b2161b2a36b85fbb672e7efb5c
PR #12713 changed the interpretation for negation of non-boolean options
(e.g. -noconnect) to no longer set the option to 0, but to remove it
from the options.
I think this is better because it gets rid of the special meaning of
'0'.
However it needs to be documented. I attempt to do so in this PR.
Addreses #14064.
e4a79b4b3a appveyor: Use clcache to speed up build (Chun Kuan Lee)
Pull request description:
https://ci.appveyor.com/project/ken2812221/bitcoin/build/patch-4.407
The build time reduced from 18 mins to 7 mins.
- clcache is a third-party software, act much like ccache. (Compile-time cache)
- `*.iobj` and `*.ipdb` is a MSVC built-in cache. (Link-time cache)
Tree-SHA512: b2f61730e23b85f36022f9088370dd50e0413b0dbb14e73e4e349165e3b4622508328d3e457b7f416fb2c42325c863243aeb92c7edf3af41482d8f8c9e239045
f34c8c466a Make objects in range declarations immutable by default. Avoid unnecessary copying of objects in range declarations. (practicalswift)
Pull request description:
Make objects in range declarations immutable by default.
Rationale:
* Immutable objects are easier to reason about.
* Prevents accidental or hard-to-notice change of value.
Tree-SHA512: cad69d35f0cf8a938b848e65dd537c621d96fe3369be306b65ef0cd1baf6cc0a9f28bc230e1e383d810c555a6743d08cb6b2b0bd51856d4611f537a12e5abb8b
e8c4a1e369 Add new regtest ports in doc following #10825 ports reattributions (Antoine Riard)
Pull request description:
Following #10825, regtest ports for p2p connections and JSON-RPC connections have been remapped from 18333 and 18332 to 18444 and 18443. This change is not documented in the wiki or nowhere else and it's puzzling to guess why your regtest JSON-rpc connections all failed even if you're following the docs.
Tree-SHA512: e2a1b9b4059060d9ed0900c1554e124ed69ae3e4648474880795128e77c7324d68aba52e4acda2f47390a9c3d36629b777e3b8c0eb10f0e08a2b120c4119dff3
8ecaee13f7 Increase signal to noise in appveyor build output by reducing the MSVC warning count from 12 to 4 (12 is assuming the changes in #14086 are also implemented). (practicalswift)
Pull request description:
Remove unreferenced local variables:
Increase signal to noise in appveyor build output by reducing the MSVC warning count from 12 to 4. 12 is the number of MSVC warnings under our current appveyor setup assuming the changes in #14086 are also implemented.
This makes it easier to spot errors or more important warnings in the verbose appveyor output. MSVC warnings are good, so having access to them in a noise free way (read: without trivial warnings) via appveyor without having to use Windows is really valuable.
See https://github.com/bitcoin/bitcoin/pull/14086#issuecomment-416610313 plus discussion for context.
Before:
```
c:\projects\bitcoin\src\script\script.cpp(272): warning C4018: '>': signed/unsigned mismatch [C:\projects\bitcoin\build_msvc\libbitcoinconsensus\libbitcoinconsensus.vcxproj]
c:\projects\bitcoin\src\rest.cpp(467): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\libbitcoin_server\libbitcoin_server.vcxproj]
c:\projects\bitcoin\src\test\allocator_tests.cpp(147): warning C4312: 'reinterpret_cast': conversion from 'int' to 'void *' of greater size [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\coins_tests.cpp(511): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\coins_tests.cpp(524): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\coins_tests.cpp(722): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\coins_tests.cpp(783): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\crypto_tests.cpp(535): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?) [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\dbwrapper_tests.cpp(265): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\net_tests.cpp(118): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\net_tests.cpp(151): warning C4101: 'e': unreferenced local variable [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\scheduler_tests.cpp(57): warning C4305: 'argument': truncation from 'int' to 'bool' [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
```
After:
```
c:\projects\bitcoin\src\script\script.cpp(272): warning C4018: '>': signed/unsigned mismatch [C:\projects\bitcoin\build_msvc\libbitcoinconsensus\libbitcoinconsensus.vcxproj]
c:\projects\bitcoin\src\test\allocator_tests.cpp(147): warning C4312: 'reinterpret_cast': conversion from 'int' to 'void *' of greater size [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\crypto_tests.cpp(535): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?) [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
c:\projects\bitcoin\src\test\scheduler_tests.cpp(57): warning C4305: 'argument': truncation from 'int' to 'bool' [C:\projects\bitcoin\build_msvc\test_bitcoin\test_bitcoin.vcxproj]
```
Tree-SHA512: 5051134126c570b8421d57c710f1f1b977600398d2b5e69f8a8bd766b3696f992bf4e3459643b99a6b7e08dee1adc92985ee4d0d52b20755954415cb6f23f2fb
5d62dcf9cf lint: Make sure we read the command line inputs using utf-8 decoding in python (Chun Kuan Lee)
Pull request description:
Make sure we read the command line inputs using utf-8 decoding in python
occurred from travis cron job:
contrib/verify-commits/verify-commits.py should run with utf-8, otherwise it would raise UnicodeDecodeError
`UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 744: ordinal not in range(128)`
Tree-SHA512: 90e4ad57fdbbbecb0a21fc2d2b03a04f5ef125e54124719ef36e5a85326930b732b47534757a7c3a8730096f3947b009ec898191928b5c2d38f9f4b3e37db48d
68bfc0bce3 doc: correct GetDifficulty doc after #13288 (fanquake)
Pull request description:
`chain` is no longer passed to GetDifficulty, and we just return `1.0` if no `blockindex`.
Tree-SHA512: 701375d732f343200c4abfaf9039d5c12b10abff97b022e84564f81b26b5ba552f1eb0c0d0fd5370b29b53319eafcf39773a36e1c2dd04ee77e61c18c7b183fa
83d53058ae Switch nPrevNodeCount to vNodesSize. (Patrick Strateman)
Pull request description:
These both have the same value, but the variable naming is confusing.
Tree-SHA512: 4f645e89efdc69884ff4c8bbcf42e2b35d2733687c0fc6ab3f0797e0141fe23ef9cde8bb6ba422f47a88f554e55a099b1f0b3f47cb9fde12db3d46b9a0041bb0
fb97437efa added note that control port must be enabled and how to do that in torrc config file (Jordan Baczuk)
Pull request description:
Reopened from #13681 because pushes made it unable to reopen.
Tree-SHA512: 34eac14308aef70963b630173cd93916201553d5323ab2de3517d4a78604ae5a7cf8691a314c0af00fe36f0ef19b94a4c371d2e7aa1229d9c603d36c51b115fb
8dfc2f30de Test rpc_help.py failed: Check whether ZMQ is enabled or not. (Kvaciral)
Pull request description:
/test/functional/rpc_help.py checks for the zmq-category even while zmq may be disabled (in /test/config.ini) , I have added a check function to test_framework.py that can be used whether to determine to include zmq in a test or not.
Tree-SHA512: 6819050277e2dc875f8d9bf49a02291555cb7b301379dfb9d898e6d8e14bfb8eeb6bef8af46d07b5db45b2fe281b35ea7f98af9ffba703768658a69addbc81b1
190bf62be1 scripted-diff: Small locking rename (Russell Yanofsky)
Pull request description:
Call sync.h primitives "locks" and "mutexes" instead of "blocks" and "waitable critical sections" to match current coding conventions and c++11 standard names.
This PR does not rename the "CCriticalSection" class (though this could be done as a followup) because it's used everywhere and would swamp the other changes in this PR. Plain mutexes should mostly be preferred instead of recursive mutexes in new code anyway.
Tree-SHA512: 39b5b2be8f7a98227be8ab0648bdbb1b620944659bdc1eb9a15b0fcc0c930457fa0c03170cfedaeee0007ea716c526b31a8d84a86dd2333ce9d8bfabd773fe45
9c4dc597dd Use LOCK macros for non-recursive locks (Russell Yanofsky)
1382913e61 Make LOCK, LOCK2, TRY_LOCK work with CWaitableCriticalSection (Russell Yanofsky)
ba1f095aad MOVEONLY Move AnnotatedMixin declaration (Russell Yanofsky)
41b88e9337 Add unit test for DEBUG_LOCKORDER code (Russell Yanofsky)
Pull request description:
Make LOCK macros work with non-recursive mutexes, and use wherever possible for better deadlock detection.
Also add unit test for DEBUG_LOCKORDER code.
Tree-SHA512: 64ef209307f28ecd0813a283f15c6406138c6ffe7f6cbbd084161044db60e2c099a7d0d2edcd1c5e7770a115e9b931b486e86c9a777bdc96d2e8a9f4dc192942
Call sync.h primitives "locks" and "mutexes" instead of "blocks" and "waitable
critical sections" to match current coding conventions and c++11 standard
names.
This PR does not rename the "CCriticalSection" class (though this could be done
as a followup) because it is used everywhere and would swamp the other changes
in this PR. Plain mutexes should mostly be preferred instead of recursive
mutexes in new code anyway.
-BEGIN VERIFY SCRIPT-
set -x
set -e
ren() { git grep -l $1 | xargs sed -i s/$1/$2/; }
ren CCriticalBlock UniqueLock
ren CWaitableCriticalSection Mutex
ren CConditionVariable std::condition_variable
ren cs_GenesisWait g_genesis_wait_mutex
ren condvar_GenesisWait g_genesis_wait_cv
perl -0777 -pi -e 's/.*typedef.*condition_variable.*\n\n?//g' src/sync.h
-END VERIFY SCRIPT-
ca1a093127 Add regression test: Don't assert(...) with side effects (practicalswift)
4c3c9c3869 Don't assert(...) with side effects (practicalswift)
Pull request description:
Don't `assert(...)` with side effects.
From the developer notes:
> **Assertions should not have side-effects**
>
> Rationale: Even though the source code is set to refuse to compile with assertions disabled, having side-effects in assertions is unexpected and makes the code harder to understand
These assertions were introduced quite recently (in #14069 which was merged two days ago) and since this is a recurring thing (see #13534 – "Don't assert(foo()) where foo() has side effects" from May) I added a simple regression test for the most obvious common side effect.
Tree-SHA512: be65db9d8d5d0f5752152ba73fe3fbb0531880f156d3cd7dfdf1752709979b63214e46ae64b1adbe1e09fa121278f4087f4ae49bff16cf8f5aec16ea6bde3650
75ea00f391 Remove unused fsbridge::freopen (practicalswift)
cceedbc4bf Don't close old debug log file handle prematurely when trying to re-open (on SIGHUP) (practicalswift)
Pull request description:
Don't close old debug log file handle prematurely when trying to re-open (on `SIGHUP`).
Context: https://github.com/bitcoin/bitcoin/pull/13148#issuecomment-386288606
Thanks @ajtowns!
Tree-SHA512: c436b4286f00fc428b60269b6d6321f435c72c7ccec3c15b2194aac71196529b30f32c2384b418ffe3ed67ba7ee8ec51f4c9c5748e65945697c0437eafcdacd1
fa782a308d qa: Use named args in some tests (MarcoFalke)
b4d3309673 scripted-diff: Use named arguments in feature_block (MarcoFalke)
749ba35e7c scripted-diff: Pass node into p2p_segwit acceptance tests (MarcoFalke)
Pull request description:
It is confusing to use a list of arguments such as `False, False, 16, ...` where it is unclear what each of them means.
Run some scripted diffs to put meaning to them.
Tree-SHA512: d768df2375ea3c77145ebb1bf4c2d690581a379031449ded7ae160022d975eb13890aa8c6a44a5eebda8791cb2910a599326e431af76ed9e60afe1d182ada65c
c516c3a770 [contrib] Support ARM and RISC-V symbol check (Chun Kuan Lee)
Pull request description:
Solve the TODO in the gitian-descripter
Tree-SHA512: 8115e2958af3dde43d9d9d05f0b1b1b93b1c2aa513e771a3e4e1342a5d78af2b0e40c0bbb7e9a0d15954897317e6f5a0d80996239af3b376d5ddd527f73428ae
This commit does the following changes:
- [wallet] Remove 'account' argument from GetLegacyBalance()
- GetLegacyBalance() is never called with an account argument.
Remove the argument and helper functions.
- [wallet] Remove CWallet::ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove AccountMove()
- Function no longer used.
- [wallet] Remove AddAccountingEntry()
- Function no longer used.
- [wallet] Remove GetAccountCreditDebit()
- Function no longer used.
- [wallet] Don't rewrite accounting entries when reordering wallet transactions.
- Accounting entries are deprecated. Don't rewrite them to the wallet
database when re-ordering transactions.
- [wallet] Remove WriteAccountingEntry()
- Function no longer used.
- [wallet] Don't read acentry key-values from wallet on load.
- [wallet] Remove ListAccountCreditDebit()
- Function no longer used.
- [wallet] Remove CAccountingEntry class
- No longer used
- [wallet] Remove GetLabelDestination
- Function no longer used.
- [wallet] Delete unused account functions
- ReadAccount
- WriteAccount
- EraseAccount
- DeleteLabel
- [wallet] Remove fromAccount argument from CommitTransaction()
- [wallet] Remove strFromAccount.
- No longer used.
- [wallet] Remove strSentAccount from GetAmounts().
- No longer used.
- [wallet] Update zapwallettxes comment to remove accounts.
- [wallet] Remove CAccount
- No longer used
- [docs] fix typo in release notes for PR 14023
0e534d4dca Fix incorrect Doxygen comments (practicalswift)
Pull request description:
Fix broken Doxygen comments.
This commit was taken from #13914 which now only covers `-Wdocumentation`.
Tree-SHA512: dddbca16bb792b8193e5f417151b5eace9acc942a321f1bc095b906e98889e3bd93509fe112ab6a24ee1f6a3a918db905bda7acefd53774fe3e6ebe669fb51ac
