This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
This adds new fields 'pubkeys' and 'embedded' to the RPC's output, and improves the
documentation for previously added 'witness_version' and 'witness_program' fields.
9c8eca7 Split up key and script metadata for better type safety (Russell Yanofsky)
Pull request description:
Suggested by @TheBlueMatt
https://github.com/bitcoin/bitcoin/pull/11403#discussion_r155599383
Combining the maps was probably never a good arrangement but is more
problematic now in presence of WitnessV0ScriptHash and WitnessV0KeyHash types.
Tree-SHA512: 9263e9c01090fb49221e91d88a88241a9691dda3e92d86041c8e284306a64d3af5e2438249f9dcc3e6e4a5c11c1a89f975a86d55690adf95bf2636f15f99f92a
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
22fddde Avoid calling GetSerializeSize on each tx in a block if !fTxIndex (Matt Corallo)
2862aca Move some additional variables into CChainState private (Matt Corallo)
fd4d80a Create initial CChainState to hold chain state information (Matt Corallo)
e104f0f Move block writing out of AcceptBlock (Matt Corallo)
50701ba Move txindex/undo data disk location stuff out of ConnectBlock (Matt Corallo)
93a34cf Make DisconnectBlock unaware of where undo data resides on disk (Matt Corallo)
Pull request description:
CChainState should eventually, essentially, be our exposed "libconsensus", but we're probably a few releases away, so the real goal is to clarify our internal interfaces. The main split was a big step, but validation.cpp is still a somewhat ranomly-mixed bag of functions that are pure functions which validate inputs (which should probably either merge with their callers or move into another file in consensus/), read/write data from disk, manipulate our current chain state (which moves into CChainState), and do mempool transaction validation.
Obviously this is only a small step, but some effort is made to clean up what functions the functions in CChainState call, and obviously as things are added its easy to keep clear "CChainState::* cannot call anything except via callbacks through CValidationInterface, pure functions, or disk read/write things". Right now there are some glaring violations in mempool callbacks, and general flushing logic needs cleaning up (FlushStateToDisk maybe shouldnt be called, and there should be an API towards setDirtyBlockIndex, but I'll leave that for after @sipa's current changesets land).
Tree-SHA512: 69b8ec191b36b19c9492b4dee74c8057621fb6ec98ad219e8da0b2ed5c3ad711b10b5af9ff1117e8807ccf88918eeeab573be8448baecc9a59f099c53095985b
5c8ff26 [tests] Add NetworkThread assertions (John Newbery)
34e08b3 [tests] Fix network threading in functional tests (John Newbery)
74e64f2 [tests] Use network_thread_start() in tests. (John Newbery)
5fc6e71 [tests] Add network_thread_ utility functions. (John Newbery)
Pull request description:
Add assert that only one NetworkThread exists at any time in functional tests, and fix cases where that wasn't true.
fixes#11776
Tree-SHA512: fe5d1c59005f94bf66e11bb23ccf274b1cd9913741b56ea11dbcd21db4cc0b53b4413c0c4c16dbcd6ac611adad5e5cc2baaa39720598ce7b6393889945d06298
07c4838 Always return true if AppInitMain got to the end (Matt Corallo)
Pull request description:
This should fix a rare zapwallettxes failure on travis, but also
avoids having init operations (re-adding wallet transactions to
mempool) running after RPC is free'd.
I believe this was the failure at https://travis-ci.org/bitcoin/bitcoin/jobs/311747844 (from #11605).
Tree-SHA512: f0fea8c1b9265e2eeda57043d541380a3e58e4d9388fa24628a52fd56324257fcd7df0ca02e8f77f66fadd68d951893bab0f610ed9fd0a89b2ccd6bad1efa351
01013f5 Simplify tx validation tests (Pieter Wuille)
2dd6f80 Add a test that all flags are softforks (Pieter Wuille)
2851b77 Make all script verification flags softforks (Pieter Wuille)
Pull request description:
This change makes `SCRIPT_VERIFY_UPGRADABLE_NOPS` not apply to `OP_CHECKLOCKTIMEVERIFY` and `OP_CHECKSEQUENCEVERIFY`. This is a no-op as `UPGRADABLE_NOPS` is only set for mempool transactions, and those always have `SCRIPT_VERIFY_CHECKLOCKTIMEVERIFY` and `SCRIPT_VERIFY_CHECKSEQUENCEVERIFY` set as well. The advantage is that setting more flags now always results in a reduction in acceptable scripts (=softfork).
This results in a nice and testable property for validation, for which a new test is added.
This also means that the introduction of a new definition for a NOP or witness version will likely need the following procedure (example OP_NOP8 here)
* Remove OP_NOP8 from being affected by `SCRIPT_VERIFY_DISCOURAGE_UPGRADABLE_NOPS`.
* Add a `SCRIPT_VERIFY_DISCOURAGE_NOP8`, which only applies to `OP_NOP8`.
* Add a `SCRIPT_VERIFY_NOP8` which implements the new consensus logic.
* Before activation, add `SCRIPT_VERIFY_DISCOURAGE_NOP8` to the mempool flags.
* After activation, add `SCRIPT_VERIFY_NOP8` to both the mempool and consensus flags.
Tree-SHA512: d3b4538986ecf646aac9dba13a8d89318baf9e308e258547ca3b99e7c0509747f323edac6b1fea4e87e7d3c01b71193794b41679ae4f86f6e11ed6be3fd62c72
a3f5657 Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512 (practicalswift)
Pull request description:
* Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512.
* ~~Avoid creating a one-past-the-end pointer in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
* ~~Avoid performing a noop memset call (zero length argument) in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
Tree-SHA512: 48ff9ab79d41aab97b5b8f6496cc08a39955a07eb424f74ada6440d3b168b6204d3527fa677e175c47e40142f9d62c7456ae162e5a2f5b557e90fb353beef1d0
3121d76 doc: Update release notes for share/rpcauth/rpcauth.py rename (Henrik Jonsson)
3fdb297 Rename rpcuser.py to rpcauth.py (Henrik Jonsson)
Pull request description:
This script creates `rpcauth` entries for bitcoin.conf, not the deprecated `rpcuser` entry, so this changes the name of the script to match.
As discussed in #11830.
Tree-SHA512: cd71c2a4043ef1381d3810b057cc83be3fac612df576b91b683ef91fdb7998c534b3b97a3313845eb867dc4bf7cc42a1250474d2261ab3f9ed2f884ca8ebd9f4
be9f38c Do not make it trivial for inbound peers to generate log entries (Matt Corallo)
Pull request description:
Based on #11580 because I'm lazy.
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).
Tree-SHA512: 8e59c8d08d00b1527951b30f4842d010a4c2fc440503ade112baa2c1b9afd0e0d1c5c2df83dde25183a242af45089cf9b9f873b71796771232ffb6c5fc6cc0cc
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
assumevalid.py, example_test.py and p2p-acceptblocks.py add
p2p_connections after the NetworkThread has been started. This isn't
permitted. Fix test to restart the network thread when adding new
connections.
p2p-leaktest.py had a potential race condition if the NetworkThread
hadn't terminated by the time we tried to restart it.
Add network thread_start(), network_thread_running() and
network_thread_join() utility functions in mininode.py and use
network_thread_running() in network thread assertions.
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
fa4c16d qa: Add getrawtransaction in_active_chain=False test (MarcoFalke)
Pull request description:
#10275 accidentally forgot to add a test for `in_active_chain==False`.
This adds a test and also removes the special casing of `blockhash.IsNull()`, which makes no sense imo.
Tree-SHA512: 6c51295820b3dcd53b0b48020ab2b8c8f5864cd5061ddab2b35d35d643eb3e60ef95ff20c06c985a2e47f7080e82f27f3e00ee61c85dce627776d5ea6febee8f
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
529b866 Test datadir in conf file exists (MeshCollider)
Pull request description:
Provoked by Nick ODell's discovery here: https://bitcoin.stackexchange.com/questions/64189/when-running-bitcoind-i-keep-getting-boostfilesystemspace-operation-not-p/64210#64210
If a custom data directory is specified using `-datadir` argument, its existence is checked before the conf file is loaded. But if the conf file then specifies a different non-existent `datadir`, that isn't tested, and results in esoteric errors like:
EXCEPTION: N5boost10filesystem16filesystem_errorE
boost::filesystem::space: Operation not permitted
This just adds a check for the datadir existence at the end of `ReadConfigFile()`
Tree-SHA512: e488618c40aa356263f94040ae00aa4be98038abef66e8674b01032d22a5553a7fafcb8fe2d1f095865b39fb138c07b7a94415a00ef837573f92f95af065f712
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
6d2f277 rpcuser.py: Use 'python' not 'python2' (Henrik Jonsson)
Pull request description:
Note that `rpcuser.py` seems to handle either version when called explicitly like `python2 rpcuser.py` / `python3 rpcuser.py`. This change allows the user's `python` to be used to interpret the script.
There's not always a `python2` installed, e.g. if only Python 3.0+ is installed as `python` / `python3`, like on Arch Linux (https://github.com/hkjn/src/blob/master/bitcoin/Dockerfile#L14) but `python` is almost always present.
# Tested
Script is already compatible with both major versions:
```
$ python2 share/rpcuser/rpcuser.py foobar
String to be appended to bitcoin.conf:
rpcauth=foobar:2951d04c215769c8887c1fa4a8f712c$63c9a08e3b69f811e3837c0d5b6a355b7f798afc7094d80008f5c56a056c387f
Your password:
TV4I54T6W38v1sj3iF4Xsw7A-wYav-Cn8uTr8qv4xZ8=
$ python3 share/rpcuser/rpcuser.py foobar
String to be appended to bitcoin.conf:
rpcauth=foobar:129afbbd214c1f85fb6b9941402506f$4c5af73a2f3fd0a1d8232c28bc5c36f9b0cffd62b7b139beb328d089b16028dc
Your password:
qqbeWrGHqbYL1tUDh1wHKkejzxiGvOa3SPkDbbCwBfs=
$ python2 --version
Python 2.7.12
$ python3 --version
Python 3.5.2
```
Tree-SHA512: b5d6de15507cfd8dbb520325cf0b67fa471fa4fe3661de4ea6841fadb6ec9ba65d0c4f545f58578168c9ce9f6e483d613cce31ab3dd28117510bf9cada3b7b91
