Makes it an error to use flags that have not been defined
on the libconsensus API.
There has been some confusion as to what pass to libconsensus, and
(combined with mention in the release notes) this should clear it up.
Using undocumented flags is a risk because their meaning,
and what combinations are allowed, changes from release to release.
E.g. it is no longer possible to pass (CLEANSTACK | P2SH) without
running into an assertion after the segwit changes.
a9aec5c Use BlockChecked signal to send reject messages from mapBlockSource (Matt Corallo)
7565e03 Remove SyncWithWallets wrapper function (Matt Corallo)
12ee1fe Always call UpdatedBlockTip, even if blocks were only disconnected (Matt Corallo)
f5efa28 Remove CConnman parameter from ProcessNewBlock/ActivateBestChain (Matt Corallo)
fef1010 Use CValidationInterface from chain logic to notify peer logic (Matt Corallo)
aefcb7b Move net-processing logic definitions together in main.h (Matt Corallo)
0278fb5 Remove duplicate nBlocksEstimate cmp (we already checked IsIBD()) (Matt Corallo)
87e7d72 Make validationinterface.UpdatedBlockTip more verbose (Matt Corallo)
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
27acfc1 [qa] Update p2p-compactblocks.py for compactblocks v2 (Suhas Daftuar)
422fac6 [qa] Add support for compactblocks v2 to mininode (Suhas Daftuar)
f5b9b8f [qa] Fix bug in mininode witness deserialization (Suhas Daftuar)
6aa28ab Use cmpctblock type 2 for segwit-enabled transfer (Pieter Wuille)
be7555f Fix overly-prescriptive p2p-segwit test for new fetch logic (Matt Corallo)
06128da Make GetFetchFlags always request witness objects from witness peers (Matt Corallo)
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
35fe039 Rename to PrecomputedTransactionData (Pieter Wuille)
ab48c5e Unit test for sighash caching (Nicolas DORIER)
d2c5d04 Precompute sighashes (Pieter Wuille)
Tests if addresses are online or offline by briefly connecting to them. These short lived connections are referred to as feeler connections. Feeler connections are designed to increase the number of fresh online addresses in tried by selecting and connecting to addresses in new. One feeler connection is attempted on average once every two minutes.
This change was suggested as Countermeasure 4 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
Updating documentation for adding new unit test files
Removing unneeded sentence from README
Removing uint160_tests.cpp as it DNE
Formatting command line instructions to use ``
fixing 80 char formatting issue in README
fixing more nits
mininode now supports witness transactions/blocks, blocktools
has a helper for adding witness commitments to blocks, and script
has a function to calculate hashes for signature under sigversion
1, used by segwit.
Py3 conversion by Marco Falke
Test to make sure upgraded nodes don't ask for non-wit blocks by
Gregory Sanders.
script_tests: always test bitcoinconsensus_verify_script_with_amount if VERIFY_WITNESS isn't set
Rename internal method + make it static
trim bitcoinconsensus_ prefix
Add SERIALIZE_TRANSACTION_WITNESS flag
48efec8 Fix some minor compact block issues that came up in review (Matt Corallo)
ccd06b9 Elaborate bucket size math (Pieter Wuille)
0d4cb48 Use vTxHashes to optimize InitData significantly (Matt Corallo)
8119026 Provide a flat list of txid/terators to txn in CTxMemPool (Matt Corallo)
678ee97 Add BIP 152 to implemented BIPs list (Matt Corallo)
56ba516 Add reconstruction debug logging (Matt Corallo)
2f34a2e Get our "best three" peers to announce blocks using cmpctblocks (Matt Corallo)
927f8ee Add ability to fetch CNode by NodeId (Matt Corallo)
d25cd3e Add receiver-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
9c837d5 Add sender-side protocol implementation for CMPCTBLOCK stuff (Matt Corallo)
00c4078 Add protocol messages for short-ids blocks (Matt Corallo)
e3b2222 Add some blockencodings tests (Matt Corallo)
f4f8f14 Add TestMemPoolEntryHelper::FromTx version for CTransaction (Matt Corallo)
85ad31e Add partial-block block encodings API (Matt Corallo)
5249dac Add COMPACTSIZE wrapper similar to VARINT for serialization (Matt Corallo)
cbda71c Move context-required checks from CheckBlockHeader to Contextual... (Matt Corallo)
7c29ec9 If AcceptBlockHeader returns true, pindex will be set. (Matt Corallo)
96806c3 Stop trimming when mapTx is empty (Pieter Wuille)
54326a6 Increase maximum orphan size to 100,000 bytes. (Gregory Maxwell)
8c99d1b Treat orphans as implicit inv for parents, discard when parents rejected. (Gregory Maxwell)
11cc143 Adds an expiration time for orphan tx. (Gregory Maxwell)
db0ffe8 This eliminates the primary leak that causes the orphan map to always grow to its maximum size. (Gregory Maxwell)
1b0bcc5 Track orphan by prev COutPoint rather than prev hash (Pieter Wuille)
CreateNewBlock returns a pointer for which the caller takes ownership.
Use std::unique_ptr to make this explicit and simplify handling of these
objects in getblocktemplate.
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
c2dd5a3 FIX: correctly measure size of priority block (Alex Morcos)
a278764 FIX: Account for txs already added to block in addPriorityTxs (Alex Morcos)
4dc94d1 Refactor CreateNewBlock to be a method of the BlockAssembler class (Alex Morcos)
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
288d85d Get rid of CTxMempool::lookup() entirely (Pieter Wuille)
c2a4724 Optimization: use usec in expiration and reuse nNow (Pieter Wuille)
e9b4780 Optimization: don't check the mempool at all if no mempool req ever (Pieter Wuille)
dbfb426 Optimize the relay map to use shared_ptr's (Pieter Wuille)
8d39d7a Switch CTransaction storage in mempool to std::shared_ptr (Pieter Wuille)
1b9e6d3 Add support for unique_ptr and shared_ptr to memusage (Pieter Wuille)
Add error and range-checking parsers for unsigned 32 and 64 bit numbers.
The 32-bit variant is required for parsing sequence numbers from the
command line in `bitcoin-tx` (see #8164 for discussion). I've thrown in
the 64-bit variant as a bonus, as I'm sure it will be needed at some
point.
Also adds tests, and updates `developer-notes.md`.
ae357d5 [Bitcoin-Tx] Add tests for sequence number support (Jonas Schnelli)
e59336f [bitcoin-tx] allow to set nSequence number over the in= command (Jonas Schnelli)
a946bb6 [RPC] createrawtransaction: add option to set the sequence number per input (Jonas Schnelli)
269a440 Add test for dbwrapper iterators with same-prefix keys. (Matt Corallo)
6030625 test: Add more thorough test for dbwrapper iterators (Wladimir J. van der Laan)
84c13e7 chain: Add assertion in case of missing records in index db (Wladimir J. van der Laan)
Fixing formatting
Adding test case into automatically generated test case set
Clean up commits
removing extra whitespace from eol
Removing extra whitespace on macro line
a68ec21 Use SipHash-2-4 for address relay selection (Pieter Wuille)
8cc9cfe Switch CTxMempool::mapTx to use a hash index for txids (Pieter Wuille)
382c871 Use SipHash-2-4 for CCoinsCache index (Pieter Wuille)
0b1295b Add SipHash-2-4 primitives to hash (Pieter Wuille)
1475ecf Fix de-serialization bug where AddrMan is corrupted after exception * CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state * CAddrDB modified to make unit tests possible * Regression test created to ensure bug is fixed * StartNode modifed to clear adrman if CAddrDB::Read returns an error code. (EthanHeilman)
Changing NOP3 op name to OP_CHECKSEQUENCEVERIFY, renaming instances of OP_NOP3 in script_tests.json to CHECKSEQUENCEVERIFY
Cleaning up NOP3 comment
Re-adding test cases that were accidentally deleted, removing dupicated test case, fixing formatting
Removing re-labeling of OP_NOP3 to OP_CSV
Fixing whitespace issues
166e4b0 Notify other serviceQueue thread we are finished to prevent deadlocks. (Pavel Janík)
db18ab2 Reenable multithread scheduler test. (Pavel Janík)
d1d7775 Improve worst-case behavior of CScript::FindAndDelete (Patrick Strateman)
e2a30bc Unit test for CScript::FindAndDelete (Gavin Andresen)
c0f660c Replace c-style cast with c++ style static_cast. (Patrick Strateman)
ec9ad5f Replace memcmp with std::equal in CScript::FindAndDelete (Patrick Strateman)
* CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state
* CAddrDB modified to make unit tests possible
* Regression test created to ensure bug is fixed
* StartNode modifed to clear adrman if CAddrDB::Read returns an error code.
This patch changes the implementation from one that stores 16 2-bit integers
in one uint32_t's, to one that stores the first bit of 64 2-bit integers in
one uint64_t and the second bit in another. This allows for 450x faster
refreshing and 2.2x faster average speed.
I made a silly mistake in a database wrapper where keys
were sorted by char instead of uint8_t. As x86 char is signed
the sorting for the block index database was messed up, resulting
in a segfault due to missing records.
Add a test to catch:
- Wrong sorting
- Seeking errors
- Iteration result not complete
Pass parent wrapper directly instead of obfuscation key. This
makes it possible for other databases which re-use this code
to use other properties from the database.
Add a namespace dbwrapper_private for private functions to be used
only in dbwrapper.h/cpp and dbwrapper_tests.
Add a method Cursor() to CCoinsView that returns a cursor which can be
used to iterate over the whole UTXO set.
- rpc: Change gettxoutsetinfo to use new Cursor method
- txdb: Remove GetStats method - Now that GetStats is implemented in
terms of Cursor, remove it.
dde46d3 Merge script_valid and script_invalid tests (Pieter Wuille)
009b503 Get rid of expect in script_tests as it's implied by scripterror (Pieter Wuille)
76da761 Make script_error a mandatory 4th field for script_tests (Pieter Wuille)
269281b Fix some misconstructed tests (Pieter Wuille)
d03e466 Fix formatting of NOPs for generated script tests (Pieter Wuille)
c7c6641 Fix JSON pretty printing in script_tests (Pieter Wuille)
The current tests for varint only check that
serialization-deserialization is a roundtrip. That is a useful test, but
it is also good to check for some exact bit patterns, to prevent a code
change that changes the serialization format from going undetected.
As the varint functions are templated, also check with different types.
They claimed to be testing P2SH scripts with non-push scriptSigs, but
1) they were not enabling P2SH
2) they have push-only scriptSigs
Fix this, and add a few more related cases.
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
Ubuntu 16.04 "xenial xerus" does not come with Python 2.x by default.
It is possible to install a python-2.7 package, but this has its own
problem: no `python` or `python2` symlink (see #7717).
This fixes the following scripts to work with python 3:
- `make check` (bctest,py, bitcoin-util-test.py)
- `make translate` (extract_strings_qt.py)
- `make symbols-check` (symbol-check.py)
- `make security-check` (security-check.py)
Explicitly call the python commands using $(PYTHON) instead
of relying on the interpreter line at the top of the scripts.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
fad8cfb [qa] mininode: Add and use CONSTs (MarcoFalke)
fa8cd46 [qa] Move create_tx() to util.py (MarcoFalke)
fad7dc8 [qa] wallet: speed up tests (MarcoFalke)
fa3a81a [tests] Extend util_ParseMoney test case (MarcoFalke)
0ecb340 test: Script_error checking in script_invalid tests (Wladimir J. van der Laan)
2317ad7 test: Re-introduce JSON pretty printing in test builder (Wladimir J. van der Laan)
b0ff857 test: Move non-generated script_invalid test to the correct place (Wladimir J. van der Laan)
