3802224 Remove all other print() methods (Wladimir J. van der Laan)
9b6d4c5 Move strprintf define to tinyformat.h (Wladimir J. van der Laan)
8121258 Remove print() from core functions (Wladimir J. van der Laan)
This was committed previously as 4975ae172 and reverted, because the flags were
applied even if the checks didn't pass. This is the same commit, fixed up to
actually disable the functionality when necessary.
Enabled automatically if boost >= 1.49.
See: https://svn.boost.org/trac/boost/ticket/2309
Also, check for a default visibility attribute, so that we can mark future
api functions correctly.
Thus the read(...) and write(...) methods of all stream classes now have identical parameter lists.
This will bring these classes one step closer to a common interface.
No need to waste startup time building something that can be done
at compile time.
This also resolves a clang++ warning originally reported in #4714,
univalue/univalue_write.cpp:33:12: warning: array subscript is of type 'char
escapes['"'] = "\\"";
^~~~
etc.
aa82795 Add detailed network info to getnetworkinfo RPC (Wladimir J. van der Laan)
075cf49 Add GetNetworkName function (Wladimir J. van der Laan)
c91a947 Add IsReachable(net) function (Wladimir J. van der Laan)
60dc8e4 Allow -onlynet=onion to be used (Wladimir J. van der Laan)
This commit adds per-network information to the
getnetworkinfo RPC call:
- Is the network limited?
- Is the network reachable
- Which proxy is used for this network, if any
Inspired by #2575.
This number was still tracked even though it's shown nowhere in the UI
anymore. It was originally removed because it didn't match the actual number of
records in the view (which contains outputs, not transactions) thus was
confusing people.
This corrects a bug where an exception thrown reading from the database causes the cursor to
be left open, which causes an assertion error to occur when the database is deleted (around
line 938 of init.cpp).
Enabled automatically if boost >= 1.49.
See: https://svn.boost.org/trac/boost/ticket/2309
Also, check for a default visibility attribute, so that we can mark future
api functions correctly.
When the libpath doesn't line up with the value from config.sub, we don't find
the correct path to boost's libs. This adds a hack to try another path before
giving up.
Should close#3219.
While we're at it, reduce the use of LIBS as well. This makes dependencies
explicit.
Fixes building with (the not-yet-merged) libsecp256k1 as well.
Github-Pull: #4689
Rebased-By: Wladimir J. van der laan <laanwj@gmail.com>
Rebased-From: 909b347 c0e5dda
Due to growing coinsviewcaches, the memory usage with checklevel=3
(and standard settings for dbcache) could be up to 500MiB on a
64-bit system. This is about twice the peak during reindexing,
unnecessarily extending bitcoind's memory envelope.
This commit reduces the maximum total size of the caches used during
verification to just nCoinCacheSize, which should be the limit.
CCryptoKeyStore::Unlock has a loop to attempt decrypting each key which
only executes once, likely due to a simple mistake when the code was
originally written.
This patch fixes the behavior by making it check all keys. It also adds
a fatal assertion in the case some decrypt but some do not, since that
indicates that the wallet is in some kind of really bad state.
This may make unlocking noticeably slower on wallets with many keys.
Remove the 'state' and 'exceptmask' from serialize.h's stream implementations,
as well as related methods.
As exceptmask always included 'failbit', and setstate was always called with
bits = failbit, all it did was immediately raise an exception. Get rid of
those variables, and replace the setstate with direct exception throwing
(which also removes some dead code).
As a result, good() is never reached after a failure (there are only 2
calls, one of which is in tests), and can just be replaced by !eof().
fail(), clear(n) and exceptions() are just never called. Delete them.
- this prevents the ability to fiddle around with the system tray when
already shutting down (e.g. on slow shutdowns because of a proxy delay)
- extends solution for #4360
- ensure normal and watch-only stuff looks consistent
- simplify UI by removing unneeded UI layout elements
- change some comments to watch-only from watchonly
6b271a3 build: fix race in 'make deploy' for windows (Cory Fields)
d343460 build: Fix 'make deploy' when binaries haven't been built yet (Cory Fields)
206a7f9 build: hook up qt translations for static osx packaging (Cory Fields)
d597219 build: add --with-qt-translationdir to configure for use with static qt (Cory Fields)
71941ce build: teach macdeploy the -translations-dir argument, for use with static qt (Cory Fields)
f8120f7 build: Find the proper xcb/pcre dependencies (Cory Fields)
eccd585 build: silence mingw fpic warning spew (Cory Fields)
a98356f build: don't let libtool insert rpath into binaries (Cory Fields)
It currently returns uint64_t, which on older boost (at least 1.46) causes
test failures on 32-bit systems.
This problem was introduced in bc42503.
Fixes#4634.
The size limit makes a lot of sense for the server, as it never has to
accept very large data.
The client, however, can request arbitrary amounts of data with
`listtransactions` on a large wallet.
Fixes#4604.
Split up HTTPReply into HTTPReply and HTTPReplyHeader, so that
the message data can be streamed directly.
Also removes a c_str(), which would have prevented binary
output with NUL characters in it.
The only other method of logging remote addresses is via
-logips=1 -debug=net
which increases the logged activity by 100x or more.
Github-Pull: #4608
Amended-By: Wladimir J. van der Laan <laanwj@gmail.com>
e59441f Process fee estimate file into temporary vector first to let sanity checking complete. (Alex Morcos)
961ae93 Fix minor bug which only affected log messages. (Alex Morcos)
17f1567 Fixed a bug with index bounds checking (Alex Morcos)
- remove starting height as table header and replace with ping time
- remove columnResizingFixer
- add local address (if available) in detailed node view (on top of the
right view below the remote address)
- remove some .c_str() by using QString::fromStdString()
- rename Address to Address/Hostname
- rename secs to just s for ping time
- use MODEL_UPDATE_DELAY from guiconstants.h for the peer refresh time
- make PeerTableModel::columnCount() return no hard-coded value
- remove and cleanup dup private: section in RPCConsole header
- add new defaults for column sizes
- remove behaviour which keeps disconnected peers selected and also remove
code which keeps track of last selected peer stats
- add sync height to detail view
- add some additional NULL pointer checks for clientModel in
rpcconsole.cpp
Port over https://github.com/chronokings/huntercoin/pull/19 from
Huntercoin: This implements a new RPC command "getchaintips" that can be
used to find all currently active chain heads. This is similar to the
-printblocktree startup option, but it can be used without restarting
just via the RPC interface on a running daemon.
This makes it possible for a node with `-onlynet=tor` to bootstrap
itself.
It also adds the base infrastructure for adding IPv6 seed nodes.
Also represent IPv4 fixed seed addresses in 16-byte format.
- error: 'vector' in namespace 'std' does not name a type
- add <vector> include in core_io.h
- remove <vector> includes from core_read.cpp and core_write.cpp
d2d9dc0 script tests: add tests for CHECKMULTISIG limits (Otto Allmendinger)
89101c6 script test: test case for 5-byte bools (Otto Allmendinger)
4cac5db script tests: value with trailing 0x00 is true (Otto Allmendinger)
833ff16 script tests: values that overflow to 0 are true (Otto Allmendinger)
0072d98 script tests: BOOLAND, BOOLOR decode to integer (Otto Allmendinger)
ed02282 additional test for OP_SIZE in script_valid.json (Otto Allmendinger)
This is a simple utility that provides command line manipulation of
a hex-encoded TX. The utility takes a hex string on the command line
as input, performs zero or more mutations, and outputs a hex string
to standard output.
This utility is also an intentional exercise of the "bitcoin library"
concept. It is designed to require minimal libraries, and works
entirely without need for any RPC or P2P communication.
See "bitcoin-tx --help" for command and options summary.
* Replace -benchmark (and the related fBenchmark) with a regular debug option, -debug=bench.
* Increase coverage and granularity of individual block processing steps.
* Add cummulative times.
Fixes various issues and cleans up code
- Fixes issue #4500: Amount widget +/- has floating point rounding artifacts
- Amount box can now be emptied again, without clearing to 0
Also aligns the amount to the right, as in other places.
First and foremost, this defaults to OFF.
This option lets a node consider such transactions non-standard,
meaning they will not be relayed or mined by default, but other miners
are free to mine these as usual.
7149499 Add comments re BitcoinUnits::formatWithUnit/formatHtmlWithUnit (Roy Badami)
f7d70c6 Remove unused fAlign argument from BitcoinUnits::format and friends (Roy Badami)
2e4fee2 Show bitcoin quantities with full precision, even in the presence of trailing zeros (Roy Badami)
7007402 Implement SI-style (thin space) thoudands separator (Roy Badami)
This is the first part of a huge effort to rework the handling of dependencies.
To start, this change allows all supported platforms to build against a static
Qt. 5.2.1 and 5.3 have been successfully tested against osx64, win32, win64,
linux32, and linux64.
It also makes a small change to the windows config, to allow linking against
qt builds with or without built-in libjpeg/libpng/libpcre/libz.
The actual build processes to take advantage of these changes (for gitian and
pull-tester) are coming soon. Until then, this should be a no-op.
- the call to CloseSocket() is placed after the WSAGetLastError(), because
a CloseSocket() can trigger an error also, which we don't want for the
logging in this two cases
Simpler alternative to #4348.
The current setup with closesocket() is strange. It poses
as a compatibility wrapper but adds functionality.
Rename it and make it a documented utility function in netbase.
Code movement only, zero effect on the functionality.
33357b2 qt: Start core thread only when needed (Wladimir J. van der Laan)
c715ff5 ui: Replace some LogPrintfs with qDebug() (Wladimir J. van der Laan)
96ff9d6 Can't log to debug log before chain params initialized (Wladimir J. van der Laan)
Block 295,000 seems to meet the criteria of a reasonable timestamp and
no strange transactions. 295,000 is the current block height in the
bootstrap.dat torrent provided by jgarzik.
Start the core thread only when needed for initialization
or shutdown.
Avoids a bit of overhead, and also avoids spamming two
log messages before logging is properly initialized.
Add a function `AreBaseParamsConfigured` and use this to check
before writing to the debug log. This avoids assertions when the
application happens to log too early, which happens in the GUI.
Messages logged before the base parameters are configured can be
shown using `-printtoconsole`.
The option is only effective for either wallet-less builds or if
-disablewallet is specified as well.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 34d5fc0 4e1a196 bd4307b d53a33b 7e09b36
Github-Pull: #4286
4eedf4f make RandAddSeed() use OPENSSL_cleanse() (Philip Kaufmann)
6354935 move rand functions from util to new random.h/.cpp (Philip Kaufmann)
001a53d add GetRandBytes() as wrapper for RAND_bytes() (Philip Kaufmann)
