42c499614a Docs: Improve readability of "Squashing commits" (wodry)
Pull request description:
It was not easy to read the comment lines for me because I was not sure whether the sentence ended with the line or not ("pull set commits"?).
Therefore, dots had been invented and I have added them to signal the end of a sentence. Also begin New sentence with a capital letter.
I guess, not all 'pick' words should be replaced by 'squash'? At least I found [this DO](https://www.digitalocean.com/community/tutorials/how-to-rebase-and-update-a-pull-request) rebase/squash documentation helpful, where is written that the first line should not be changed.
Tree-SHA512: 1cb6d866a7295d44e2c8a7911f8a2650eb2f0ba0cffe2b97e90f7e1ed36ac942480b45ef46e01dd3871beb20d04840fb5093fdb414b60f6cc4f88f95fe70f47b
It was not easy to read the comment lines for me because I was not sure whether the sentence ended with the line or not ("pull set commits"?).
Therefore, dots had been invented and I have added them to signal the end of a sentence. Also begin New sentence with a capital letter.
I guess, not all 'pick' words should be replaced by 'squash'? At least I found [https://www.digitalocean.com/community/tutorials/how-to-rebase-and-update-a-pull-request](this) rebase/squash documentation helpful, where is written that the first line should not be changed.
c8176b3cc7 Add linter: Make sure we explicitly open all text files using UTF-8 or ASCII encoding in Python (practicalswift)
634bd97001 Explicitly specify encoding when opening text files in Python code (practicalswift)
Pull request description:
Add linter: Make sure we explicitly open all text files using UTF-8 encoding in Python.
As requested by @laanwj in #13440.
Tree-SHA512: 1651c00fe220ceb273324abd6703aee504029b96c7ef0e3029145901762c733c9b9d24927da281394fd4681a5bff774336c04eed01fafea997bb32192c334c06
9b72c988a0 scripted-diff: Avoid temporary copies when looping over std::map (Ben Woosley)
Pull request description:
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
Tree-SHA512: b656d66b69ffa1eb954124aa8ae2bc5436ca50262abefa93bdda55cfcdaffc5ff90cd40539051a2bd06355ba69ddf245265cc8764eebff66d761b3aec06155a9
25bc9615b7 Document validationinterace callback blocking deadlock potential. (Matt Corallo)
Pull request description:
From the branches-I've-had-lying-around-and-forgot-to-PR department...
This is a comment-only PR, but the comments point out an API quirk that isn't exactly trivial. None of our use-cases right now hit this, but if we were to call SyncWithValidationInterfaceQueue (eg to limit queue depth) in ATMP, I'm pretty sure we'd hit a deadlock there.
Tree-SHA512: 889dd8fc9eb15d1f2aa5ca467e783bc8f07bc543b166b032741795b0db7a0df11a2846d3cb7c69bafa8d1acf970021001b742f52be06725a932813230c5b4a7b
ad691f666b Add linter: Enforce the source code file naming convention described in the developer notes (practicalswift)
Pull request description:
Add linter: Enforce the source code file naming convention described in the developer notes.
Tree-SHA512: 6458acf5383de7e81554bdd954c3a74c2bbf26286687ea69d934f11174d2f6bd573e8d2c16a7e77bbd12065e65be7700ecd7791d215f286e18f346bf964cd17d
c9924a2756 Fix incorrect shell quoting in FreeBSD build instructions. (murrayn)
Pull request description:
The current instructions suggest:
BDB_PREFIX='$PWD/db4'
which results in BDB_PREFIX being set, literally, to '$PWD/db4'.
Tree-SHA512: 4a920d7a506ff94fb12793f0b8161fdfe0798382cfa88290a0eadd6926843b577328f7159a55039e2655def7ddf2e7a1eaa3dd30490292d4a920c98759becf56
fa3d39ec53 doc: Remove note to install all boost dev packages (MarcoFalke)
Pull request description:
Those notes are for systems that are EOL. Also, those instructions would pull in a ton of additional dependencies such as `python2`.
Can be reviewed with `git diff HEAD~ --word-diff`
Tree-SHA512: 7e379b3f0b7fe88452baed8860438a7867a025e650a265ed0cd5d47076983f4176545b7d96a4b7f25ae9fcb325f0116d909f3ffb6ff2d7573fddd777fe5b4c79
86edf4a2a5 expose CBlockIndex::nTx in getblock(header) (Gregory Sanders)
Pull request description:
Recent publication of a weakness in Bitcoin's merkle tree construction demonstrates many SPV applications vulnerable to an expensive to pull off yet still plausible attack: https://bitslog.wordpress.com/2018/06/09/leaf-node-weakness-in-bitcoin-merkle-tree-design/
Including the coinbase in the txoutproof seems the most effective fix, however results in a significant efficiency downgrade. Transactors will not even know a priori what the size of their proof will be within a couple orders of magnitude, unless they use the mid-state of SHA2 as detailed in the blog post.
Some applications, like Elements blockchain platform that take SPV-style proofs have optional access to a bitcoind to verify these proofs of inclusion and check depth in the chain. Returning `CBlockIndex::nTx` would allow an extremely easy and compact way of checking the depth of the tree, with no additional overhead to the codebase, and works with pruned nodes.
`getblockheader` is arguably not the place for it, but as mentioned before, is a natural workflow for us checking depth of a block in a possibly pruned node.
We should also ensure that `verifytxoutproof` ends up validating this depth fact as well, but left this for another PR.
Tree-SHA512: af4cf48e704c6088f8da06a477fda1aaa6f8770cee9b876c4465d1075966d6a95831a88817673fe5a0d6bbcdc1ffcbc1892e2be0d838c60fc6958d33eacdcc14
c2dfbb4a97 Add unavailable options to hidden options category (Andrew Chow)
Pull request description:
From IRC:
```
<ossifrage> FYI, bitcoin-qt from the head I built today won't start if you have "daemon=0" in the config file, so you can't use the same config for either bitcoind or bitcoin-qt
<ossifrage> Seems like bitcoin-qt should ignore this option?
<provoostenator> ossifrage: probably caused by 13112. Another problem is disablewallet=1 will prevent a launch if you compile bitcoind without wallet. It probably needs to be relaxed slightly.
```
Adds all of the options that are unavailable due to compiling options to the hidden category so that shared config files do not break with the alternative binaries.
Tree-SHA512: 1ef43f5f7ad46ecc2865d22ee683ef22831e8f131ec99b732bb36d90381f7964bf64829595e993c2d435823fe4425a20323c8e65307cf2463a9e40b8049ab559
faf52f953b tests: Drop variadic macro (MarcoFalke)
Pull request description:
The C++11 constructor of `std::vector` that takes an initializer list, is not `explicit`. Thus, the macro is not required and can be dropped.
Hopefully fixes#13456
Tree-SHA512: 4095ed205f88138a7cd5b14790cc426899966f622a924a9b3f7de646a0d801a48ffb8921da760f1f93d5481298477c8a64dbec291381bb9aa77b075bdd2659f2
3d69853090 travis: Change Mac goal to all deploy so that travis can build all executables for Mac. (Chun Kuan Lee)
Pull request description:
Currently, travis only build bitcoin-qt for Mac with make deploy, so I think that we can add a make step to build cli, daemon, test and bench executables.
Tree-SHA512: 346c207836ee7313a57e0cd03367ada7e95c182d0f58b06c4ee5b8f2865ba4ee077b030a5494b58a808c015afe0569fa3252d0a5a687c47b7094dc77599ce50e
9882d1f044 Reset default -g -O2 flags when enable debug (Chun Kuan Lee)
Pull request description:
The default CXXFLAGS is -g -O2, this should not appear when enable debug.
fixes#13432
Tree-SHA512: 79447f3e1fab9e6cd12f5ca49b3d42187e856e0c159ed01140ea93d6ef1fbb1af3d65b338308566330491052c0177d12abe26796513502ddde31692665a0dbb4
51cd508e2f When build fails due to lib missing, indicate which one (Ben Woosley)
Pull request description:
A failure of "lib missing" has limited utility.
Tree-SHA512: de77c077ea223bb862a6261fd99e9ddc533e28ed42837ac4262a1c0f24d73add4d2baae6be5cb5ef2012be32bcc3ae587dbc1eab0c42b633bea8eec64b18a249
f6f8026e40 validation: check the specified number of blocks (off-by-one) (Karl-Johan Alm)
Pull request description:
```
echeveria | 2018-06-11 02:03:03.384975 Verifying last 3 blocks at level 3
echeveria | 2018-06-11 02:03:23.676793 No coin database inconsistencies in last 4 blocks (6564 transactions)
echeveria | off by one?
sipa | echeveria: possibly!
kallewoof | Looks like it checks one more block than suggested. `if (pindex->nHeight < chainActive.Height()-nCheckDepth) break;` should probably be `<=`.
sipa | kallewoof: agree
```
Post-commit:
```
2018-06-11T05:24:02Z Verifying last 6 blocks at level 3
2018-06-11T05:24:02Z [0%]...[16%]...[33%]...[50%]...[66%]...[83%]...[99%]...[DONE].
2018-06-11T05:25:07Z No coin database inconsistencies in last 6 blocks (7258 transactions)
```
Pre-commit:
```
2018-06-11T05:27:11Z Verifying last 6 blocks at level 3
2018-06-11T05:27:11Z [0%]...[16%]...[33%]...[50%]...[66%]...[83%]...[99%]...[DONE].
2018-06-11T05:27:12Z No coin database inconsistencies in last 7 blocks (9832 transactions)
```
Tree-SHA512: 6e68dc4ba74232518c2ba8ea624d65893534f3619d43ccdf0b9c65992f25b68cb52cf54fa35e6e3d092d1eee5c9a8887057828895f1acdafc0ebb48f683fffdc
51ed05a2b9 travis: Increase travis_wait time while verifying commits (Chun Kuan Lee)
Pull request description:
From https://travis-ci.org/ken2812221/bitcoin-verify-commits/builds
I have run vecify-commits.py nightly on travis, as you can see that 30 minutes is not enough, it took 30-50 minutes to run the script with no extra options. So change it to 50 minutes would be better. Forgot to change this at #13066
Tree-SHA512: fced346edcb7dc626fa6e714d7db9a34d3e9f283ada64e19c30565ed214f72e26a57a905b4eb71ab24a16c97a1bd35e57e9a83dbb7dc1fff2db26505b810e61e
Options that are not available (but known in the source code) will
cause an error if they are specified.
Make these options "available" by adding them to the hidden options
category to prevent conf files from failing when shared between binaries
that have different options available.
57ba401abc Enable double-SHA256-for-64-byte code on 32-bit x86 (Pieter Wuille)
Pull request description:
The SSE4 and AVX2 double-SHA256-for-64-byte input code from #13191 compiles fine on 32-bit x86 systems, but the autodetection logic in sha256.cpp doesn't enable it. Fix this.
Note that these instruction sets are only available on CPUs that support 64-bit mode as well, so it is only beneficial in the (perhaps unlikely) scenario where a 64-bit CPU is running a 32-bit Bitcoin Core binary.
Tree-SHA512: 39d5963c1ba8c33932549d5fe98bd184932689a40aeba95043eca31dd6824f566197c546b60905555eccaf407408a5f0f200247bb0907450d309b0a70b245102
From https://travis-ci.org/ken2812221/bitcoin-verify-commits/builds
I have run vecify-commits.py nightly on travis, as you can see that 30 minutes is not enough, it took 30-50 minutes to run the script with no extra options. So change it to 50 minutes would be better.
e5b2cd8e75 Use python instead of slow shell script on verify-commits (Chun Kuan Lee)
Pull request description:
The cron job that runs every day would fail because of git checkout a single commit, not a branch.
#12708 introduce a method to check whether merges are clean.
However, there are four merges are not clean.
So, I add a list of merges that are dirty and ignore them.
Also, I modify the current shell script to python, it makes the script speed up a lot.
The python code `tree_sha512sum` was copied from `github-merge.py`
I've re-designed this. Now we verify all the things by default.
- Add `--disable-tree-check` option, not to check SHA-512 tree
- Add `--clean-merge NUMBER` option, only verify commits after <NUMBER> days ago
Travis running time:
|option|time|
|-|-|
|verify-commits.py|[25m47.02s(1547.02s)](https://travis-ci.org/ken2812221/bitcoin/jobs/373321423)|
|verify-commits.py --disable-tree-check|[19m10.08s(1150.08s)](https://travis-ci.org/ken2812221/bitcoin/jobs/373321423)|
|verify-commits.py --clean-merge 30|[9m18.18s(558.18s)](https://travis-ci.org/ken2812221/bitcoin/jobs/373321423)|
|verify-commits.py --disable-tree-check --clean-merge 30|[1m16.51s(76.51s)](https://travis-ci.org/ken2812221/bitcoin/jobs/373321423)|
Since the cron job always fail, I've created a respository to verify this daily.
[](https://travis-ci.org/ken2812221/bitcoin-verify-commits)
Tree-SHA512: 476bcf707d92ed3d431ca5642e013036df1506120d3dd2aa718f74240063ce856abd78f4c948336c2a6230dfe5c60c6f2d52d19bdb52d647a1c5f838eaa02e3b
fa7a6cf1b3 policy: Treat segwit as always active (MarcoFalke)
Pull request description:
Now that segwit is active for a long time, there is no need to reject transactions with the reason that segwit hasn't activated.
Strictly speaking, this is a bug fix, because with the release of 0.16, we create segwit transactions in our wallet by default without checking if they are allowed by local policy.
More broadly, this simplifies the code as if "premature witness" was always set to true with the corresponding command line args.
Tree-SHA512: 484c26aa3a66faba6b41e8554a91a29bfc15fbf6caae3d5363a3966283143189c4bd5333a610b0669c1238f75620691264e73f6b9f1161cdacf7574d946436da
fa8071a098 qa: Log as utf-8 (MarcoFalke)
Pull request description:
Explicitly read and write the log files with utf-8 as encoding
Tree-SHA512: ca28f37f34a09845c736ff6c4c21733c3c39584f52c81e48ff25e5e35979c317d0989862b2b93acc7e359fbcc20b99533365455830b2ddb41eb4d8c17314534e
e56771365b Do not use uppercase characters in source code filenames (practicalswift)
419a1983ca docs: Add a note about the source code filename naming convention (practicalswift)
Pull request description:
Add a note about the source code filename naming convention.
Tree-SHA512: 8d329bd9e19bcd26e74b0862fb0bc2369b46095dbd3e69d34859908632763abd7c3d00ccc44ee059772ad4bae4460c2bcc1c0e22fd9d8876d57e5fcd346cea4b
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
-BEGIN VERIFY SCRIPT-
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : m/for (\1std::pair<const \2\3 : m/' src/*.cpp src/**/*.cpp
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : (.*)map/for (\1std::pair<const \2\3 : \4map/' src/*.cpp src/**/*.cpp
-END VERIFY SCRIPT-
16e3cd380a Clarify include recommendation (practicalswift)
6d10f43738 Enforce the use of bracket syntax includes ("#include <foo.h>") (practicalswift)
906bee8e5f Use bracket syntax includes ("#include <foo.h>") (practicalswift)
Pull request description:
When analysing includes in the project it is often assumed that the preferred bracket include syntax (`#include <foo.h>`) mentioned in `developer-docs.md` is used consistently. @sipa:s excellent circular dependencies script [`circular-dependencies.py`](50c69b7801/contrib/devtools/circular-dependencies.py) (#13228) is an example of a script making this reasonable assumption.
This PR enables automatic Travis checking of the include syntax making sure that the bracket syntax includes (`#include <foo.h>`) is used consistently.
Tree-SHA512: a414921aabe8e487ebed42f3f1cbd02fecd1add385065c1f2244cd602c31889e61fea5a801507ec501ef9bd309b05d3c999f915cec1c2b44f085bb0d2835c182
f77e1d34fd test: Add MempoolAncestryTests (Karl-Johan Alm)
a08d76bcfe mempool: Calculate descendant maximum thoroughly (Karl-Johan Alm)
6d3568371e wallet: Switch to using ancestor/descendant limits (Karl-Johan Alm)
6888195b06 wallet: Strictly greater than for ancestor caps (Karl-Johan Alm)
322b12ac4e Remove deprecated TransactionWithinChainLimit (Karl-Johan Alm)
4784751547 Switch to GetTransactionAncestry() in OutputEligibleForSpending (Karl-Johan Alm)
475a385a80 Add GetTransactionAncestry to CTxMemPool for general purpose chain limit checking (Karl-Johan Alm)
46847d69d2 mempool: Fix max descendants check (Karl-Johan Alm)
b9ef21dd72 mempool: Add explicit max_descendants (Karl-Johan Alm)
Pull request description:
Currently, `TransactionWithinChainLimit` is restricted to single-output use, and needs to be called every time for different limits. If it is replaced with a chain limit value calculator, that can be called once and reused, and is generally more flexible (see e.g. #12257).
Update: this PR now corrects usage of max ancestors / max descendants, including calculating the correct max descendant value, as advertised for the two limits.
~~This change also makes `nMaxAncestors` signed, as the replacement method will return `-1` for "not in the mempool", which is different from "0", which means "no ancestors/descendants in mempool".~~
~~This is a subset of #12257.~~
Tree-SHA512: aa59c849360542362b3126c0e29d44d3d58f11898e277d38c034dc4b86a5b4500f77ac61767599ce878c876b5c446fec9c02699797eb2fa41e530ec863a00cf9
67e0e04140 [wallet] [docs] Update release notes for removing `getlabeladdress` (John Newbery)
81608178cf [wallet] [rpc] Remove getlabeladdress RPC (John Newbery)
Pull request description:
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
Tree-SHA512: 7f45d0456248ebcc4e54dd34e2578a09a8ea8e4fceda75238ccea9d731dc99a3f3c0519b18a9739de17d2e6e59c9c2259ba67c9ae2e3cb2a40ddb14b9193fe29
f68049dd87 crypto: cleanup sha256 build (Cory Fields)
Pull request description:
Requested by @sipa in #13386.
Rather than appending all possible cpu variants to all targets, create a convenience variable that encompasses all.
Tree-SHA512: 8e9ab2185515672b79bb7925afa4f3fbfe921bfcbe61456833d15457de4feba95290de17514344ce42ee81cc38b252476cd0c29432ac48c737c2225ed515a4bd
fa6edfef35 qa: Remove portseed_offset from test runner (MarcoFalke)
Pull request description:
The portseed_offset is no longer needed in the test runner, since we already kill leftover processes (see #12904). This "fixes" #10869 because we deterministically pick ports starting at 11000
Tree-SHA512: 1ee22e19e02acd3afadc7c6a2b391fd3b5cfcec22c0fe194f3207251e7b1264a04e47d90a3ff8be4aca7d0ec33219a2f5855076acb3565291767939bc2f2fa17
