ParseHashV validates the length and encoding of the string and throws
an informative RPC error on failure, which is as good or better than
these alternative calls.
Note I switched ParseHashV to check string length first, because
IsHex tests that the length is even, and an error like:
"must be of length 64 (not 63, for X)" is much more informative than
"must be hexadecimal string (not X)"
3fe836b78d [moveonly] Extract RescanWallet to handle a simple rescan (Ben Woosley)
Pull request description:
Where the outcome does not depend on the result, apart from a simple
success check.
Tree-SHA512: e0d29c6fc0c7f99a730289e5a80deb586b2848aead56b5198a71ef01f65374812468dfd57be0b8b076eb9be4090d5101d28d979a1d5c3d2f1caeca77b303e90e
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
d8e9a2a Remove "rpc" category from GetWarnings (Wladimir J. van der Laan)
7da3b0a rpc: Move RPC_FORBIDDEN_BY_SAFE_MODE code to reserved section (Wladimir J. van der Laan)
2ae705d Remove Safe mode (Andrew Chow)
Pull request description:
Rebase of #10563. Safe mode was [disabled by default and deprecated in 0.16](https://github.com/bitcoin/bitcoin/blob/master/doc/release-notes/release-notes-0.16.0.md#safe-mode-disabled-by-default), so probably should be removed for 0.17.
> Rationale:
>
> Safe mode is useless. It only disables some RPC commands when large work forks are detected. Nothing else is affected by safe mode. It seems that very few people would be affected by safe mode. The people who use Core as a wallet are primarily using it through the GUI, which safe mode does not effect. In the GUI, transactions will still be made as normal; only a warning is displayed.
>
> I also don't think that we should be disabling RPC commands or any functionality in general. If we do, it should be done consistently, which safe mode is not. If we want to keep the idea of a safe mode around, I think that the current system needs to go first before a new system can be implemented.
Tree-SHA512: 067938f47ca6e879fb6c3c4e21f9946fd7c5da3cde67ef436f1666798c78d049225b9111dc97064f42b3bc549d3915229fa19ad5a634588f381e34fc65d64044
1f45e21 scripted-diff: Convert 11 enums into scoped enums (C++11) (practicalswift)
Pull request description:
Rationale (from Bjarne Stroustrup's ["C++11 FAQ"](http://www.stroustrup.com/C++11FAQ.html#enum)):
>
> The enum classes ("new enums", "strong enums") address three problems with traditional C++ enumerations:
>
> * conventional enums implicitly convert to int, causing errors when someone does not want an enumeration to act as an integer.
> * conventional enums export their enumerators to the surrounding scope, causing name clashes.
> * the underlying type of an enum cannot be specified, causing confusion, compatibility problems, and makes forward declaration impossible.
>
> The new enums are "enum class" because they combine aspects of traditional enumerations (names values) with aspects of classes (scoped members and absence of conversions).
Tree-SHA512: 9656e1cf4c3cabd4378c7a38d0c2eaf79e4a54d204a3c5762330840e55ee7e141e188a3efb2b4daf0ef3110bbaff80d8b9253abf2a9b015cdc4d60b49ac2b914
92fabcd44 Add LookupBlockIndex function (João Barbosa)
43a32b739 Add missing cs_lock in CreateWalletFromFile (João Barbosa)
f814a3e8f Fix cs_main lock in LoadExternalBlockFile (João Barbosa)
c651df8b3 Lock cs_main while loading block index in AppInitMain (João Barbosa)
02de6a6bc Assert cs_main is held when accessing mapBlockIndex (João Barbosa)
Pull request description:
Replace all `mapBlockIndex` lookups with the new `LookupBlockIndex()`. In some cases it avoids a second lookup.
Tree-SHA512: ca31118f028a19721f2191d86f2dd398144d04df345694575a64aeb293be2f85785201480c3c578a0ec99690516205708558c0fd4168b09313378fd4e60a8412
* Z is the zone designator for the zero UTC offset.
* T is the delimiter used to separate date and time.
This makes it clear for the end-user that the date/time logged is
specified in UTC and not in the local time zone.
92f1f8b31 Split off key_io_tests from base58_tests (Pieter Wuille)
119b0f85e Split key_io (address/key encodings) off from base58 (Pieter Wuille)
ebfe217b1 Stop using CBase58Data for ext keys (Pieter Wuille)
32e69fa0d Replace CBitcoinSecret with {Encode,Decode}Secret (Pieter Wuille)
Pull request description:
This PR contains some of the changes left as TODO in #11167 (and built on top of that PR). They are not intended for backporting.
This removes the `CBase58`, `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey` classes, in favor of simple `Encode`/`Decode` functions. Furthermore, all Bitcoin-specific logic (addresses, WIF, BIP32) is moved to `key_io.{h,cpp}`, leaving `base58.{h,cpp}` as a pure utility that implements the base58 encoding/decoding logic.
Tree-SHA512: a5962c0ed27ad53cbe00f22af432cf11aa530e3efc9798e25c004bc9ed1b5673db5df3956e398ee2c085e3a136ac8da69fe7a7d97a05fb2eb3be0b60d0479655
Allow importmulti RPC to apply address labels when importing standard
scriptPubKeys. This makes the importmulti RPC less finnicky about import
formats and also simpler internally.
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
5a5e4e9 [wallet] Remove CTransaction&() helper conversion operator from wallet implementation. (Karl-Johan Alm)
Pull request description:
The `CTransaction&()` operator in `CMerkleTx` makes conversion into `CTransaction`s transparent, but was marked as to-be-removed in favor of explicitly getting the `tx` ivar, presumably as the operator can lead to ambiguous behavior and makes the code harder to follow.
This PR removes the operator and adapts callers. This includes some cases of `static_cast<CTransaction>(wtx)` → `*wtx.tx`, which is definitely an improvement.
Tree-SHA512: 95856fec7194d6a79615ea1c322abfcd6bcedf6ffd0cfa89bbdd332ce13035fa52dd4b828d20df673072dde1be64b79c513529a6f422dd5f0961ce722a32d56a
c098c58 Wrap dumpwallet warning and note scripts aren't dumped (MeshCollider)
a38bfbc Add wallet backup text to import*, add* and dumpwallet RPCs (MeshCollider)
Pull request description:
Closes https://github.com/bitcoin/bitcoin/issues/11243
Adds "Requires a new wallet backup" text to `addwitnessaddress`, `importprivkey`, `importmulti`, `importaddress`, `importpubkey`, and `addmultisigaddress`. Also adds a warning to `dumpwallet` that backing up the seed alone is not sufficient to back up non-HD addresses
Tree-SHA512: 76d7cdca54d5b458acf479154620322391b889922525fddd6153f4164cfee393ad743757400cb8f6b1b30f24947df68ea9043b4e509f7df77a8fa05dda370933
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
This patch removes the need for the intermediary Base58 type
CBitcoinAddress, by providing {Encode,Decode,IsValid}Destination
function that directly operate on the conversion between strings
and CTxDestination.
This contains most of the changes of 10563 "remove safe mode", but doesn't
remove the safe mode yet, but put an `ObserveSafeMode()` check in
individual calls with okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables,
which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
deaf48b Handle TIMESTAMP_WINDOW within CWallet::RescanFromTime (Russell Yanofsky)
5b2be2b Make CWallet::RescanFromTime comment less ambiguous (Russell Yanofsky)
9bb66ab Add RescanFromTime method and use from rpcdump (Russell Yanofsky)
ccf84bb Move birthday optimization out of ScanForWalletTransactions (Russell Yanofsky)
Tree-SHA512: cd38433b8f5c5e44ecfba830a6a26bd9a9d0f4a22ae42bce17773d1a6fb25e1ee4289484996dad2d7acfa03059917ff062459f25030a761da7083ba5fbc87bc9
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
Start importwallet rescans at the first block with timestamp greater or equal
to the wallet birthday instead of the last block with timestamp less or equal.
This fixes an edge case bug where importwallet could fail to start the rescan
early enough if there are blocks with decreasing timestamps or multiple blocks
with the same timestamp.
An off-by-one-block bug in importmulti rescan logic could cause it to return
success in an edge case even when a rescan was not successful. The case where
this would happen is if there were multiple blocks in a row with the same
GetBlockTimeMax() value, and the last block was scanned successfully, but one
or more of the earlier blocks was not readable.
Occasionally I waste a lot of time not remembering that the second parameter to importprivkey must be blank if you intend to stop rescan with "false" as the third parameter.
7759aa2 Save watch only key timestamps when reimporting keys (Russell Yanofsky)
Tree-SHA512: 433b5a78e5626fb2f3166e6c84c22eabd5239d451dc82694da95af237e034612a24f1a8bc959b7d2f2e576ce0b679be1fa4af929ebfae758c7e832056ab67061
The removeprunedfunds() RPC was returning misleading or incorrect error
codes (for example RPC_INTERNAL_ERROR when the transaction was
not found in the wallet). This commit fixes those error codes:
- RPC_INTERNAL_ERROR should not be returned for application-level
errors, only for genuine internal errors such as corrupted data.
This error code has been replaced with RPC_WALLET_ERROR.
This commit also updates the test cases to explicitly test the error code.
Previously if an existing watch only key was reimported with a new timestamp,
the new timestamp would not be saved in the key metadata, and would not be used
to update the wallet nTimeFirstKey value (which could cause rescanning to start
at the wrong point and miss transactions).
Issue was pointed out by Jonas Schnelli <dev@jonasschnelli.ch> in
https://github.com/bitcoin/bitcoin/pull/9108#issuecomment-279715550
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
