This is necessary because core_write has to write amounts in
TxToUniv, and mistakingly uses FormatMoney for that
(which is only for debugging).
We don't move AmountFromValue at the same time, as
this is more challenging due to the RPCError depencency
there.
01699fb Fix resendwallettransactions assert failure if -walletbroadcast=0 (Matt Corallo)
Pull request description:
This fixes#10981 in my preferred way.
Tree-SHA512: 2e43d3ac78d13c5d59db23a82c76c722cc3344767a8237617080e489296d27a98bb1b3bd469b2c9b289b57a9da3709c90448d7a23bcc2e1dfb791c4fd16be015
e7539f8 Fix some broken init-time prints/constants (Matt Corallo)
13ab353 Check for empty coinsview instead of just-reset coinsview in init (Matt Corallo)
fce3f4f Fix resume-of-reindex-after-restart (Matt Corallo)
efac91e Always wait for threadGroup to exit in bitcoind shutdown (Matt Corallo)
Pull request description:
This is a follow-on to #10758 to help move 10758 along. The first fixes a regression in master that was partially fixed in 10758, the second I'm not sure if its a regression or not, but its clearly a bug that should be fixed.
Tree-SHA512: aca7b97a97dca66e1a218a33cc6f4aa002292ff1bb0af64e35b81fbaa91b9504f2605375808b43e93a63fc73634ad079b30ef6c9f4ba338d3b5f72d816dfeaff
1de73f4 Disconnect network service bits 6 and 8 until Aug 1, 2018 (Matt Corallo)
Pull request description:
Immediately disconnect peers that use service bits 6 and 8 until August 1st, 2018
These bits have been used as a flag to indicate that a node is running incompatible
consensus rules instead of changing the network magic, so we're stuck disconnecting
based on the service bits, at least for a while.
Staying connected to nodes on other networks only prevents both sides from reaching consensus quickly, wastes network resources on both sides, etc.
Didn't add constants to protocol.h as the code there notes that "service bits should be allocated via the BIP process".
Tree-SHA512: 2d887774fcf20357019ffc2a8398464c76c1cff2c4e448c92bd5f391d630312301977fea841e0534df6641c7c5547605a5aad82859c59c4bd68be865e6d5a4c6
1967d2a qt: Increase BLOCK_CHAIN_SIZE constants (Wladimir J. van der Laan)
Pull request description:
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added a bit extra to accomodate the near future (15GB for the chain and 1GB for the chainstate).
Tree-SHA512: 76ec7770bd3a30380b0224a0f307cdad14c8227ef726dd55738cebe9d894430865aff11e05a793fd3e60d8fe019dbb392f574c1fb63ec746618b4460ed64bd0c
11dd29b [net] Fix use of uninitialized value in getnetworkinfo(const JSONRPCRequest& request) (practicalswift)
Pull request description:
When running `test_bitcoin` under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable `nLocalServices` is triggered by `g_connman->GetLocalServices()` in `getnetworkinfo(const JSONRPCRequest& request)` (`net.cpp:462`):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized `nLocalServices` is that `CConnman::Start(...)` is not called
by the tests, and hence the initialization normally performed by `CConnman::Start(...)` is
not done.
This commit adds a method `Init(const Options& connOptions)` which is called by both the
constructor and `CConnman::Start(...)`. This method initializes `nLocalServices` and the other
relevant values from the supplied `Options` object.
Tree-SHA512: d8742363acffd03b2ee081cc56840275569e17edc6fa4bb1dee4a5971ffe4b8ab1d2fe7b68f98a086bf133b7ec46f4e471243ca08b45bf82356e8c831a5a5f21
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added
a bit extra to accomodate the near future (15GB for the chain and 1GB
for the chainstate).
49d903e Eliminate fee overpaying edge case when subtracting fee from recipients (Alex Morcos)
Pull request description:
I'm not sure if this is the cause of the issue in #10034 , but this was a known edge case. I just didn't realize how simple the fix is.
Could use a couple more eyes to make sure nothing silly can go wrong here, but if we all agree it's this simple, we can add this as another 0.15 bug fix.
Tree-SHA512: db1dd1e83363a3c231267b626d3a388893ee70ba1972056fe2c339c5c9e4fbfd30f7fe837c30cc7be884d454797fd4c619b9d631a8d5eeb55cdb07402a83acb3
When running test_bitcoin under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable nLocalServices is triggered by g_connman->GetLocalServices()
in getnetworkinfo(const JSONRPCRequest& request) (net.cpp:462):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized nLocalServices is that CConnman::Start(...) is not called
by the tests, and hence the initialization normally performed by CConnman::Start(...) is
not done.
This commit adds a method Init(const Options& connOptions) which is called by both the
constructor and CConnman::Start(...). This method initializes nLocalServices and the other
relevant values from the supplied Options object.
This fixes a few cases where we should be treating a restart-after-
coinsviewdb-reset identically to a just-reset-coinsviewdb.
Thanks to @morcos for identifying the bug.
This more clearly uses fReindex vs fReset to make sure we're not
clearing our coinsdb needlessly when restarting after a reindex.
It also makes it so that restarting after shutting down mid-reindex
isn't treates specially at all during txdb loading code, as it
shouldn't be.
This resolves a possible-assert-on-shutdown race introduced in
1f668b6468 when early shutdown
occurs.
Previously this was not done to avoid any cases where the
threadGroup might not exit due to a blocking thread, but at this
point the threadGroup isn't used all that much, plus Qt already
does this, and its good to keep their init/shutdown consistent.
For those curious, the threadGroup is only used in a few places:
* Its used to run the CCheckQueues in script validation, but these
use the boost mutex/condition variable primitives, so they
respect the interrupt pretty trivially.
* Its used for the import thread, which should exit rather quickly
as mostly it just calls LoadExternalBlockFile, which has an
interruption_point right before each block loaded.
* Its used in the scheduler thread, which is only used for:
* validationinterface has an effectively-dummy reference to it.
* wallet compaction, which should not last long
* addr/banlist dumping from CConnman, which should also be fast
e222dc2 Replace ismine with producesignature check in witnessifier (Andrew Chow)
Pull request description:
Instead of using ismine to check whether an address can be spent by us, make the witness version of the script or address first and then use ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
This is to fix cases where we don't have all of the private keys (for something like a multisig address) but have the redeemscript so we can witnessify it.
Tree-SHA512: 371777aee839cceb41f099109a13689120d35cf3880cde39216596cc2aac5cc1096af7d9cf07ad9306c3b05c073897f4518a7e97f0b88642f1e3b80b799f481e
efeb273 Force on-the-fly compaction during pertxout upgrade (Pieter Wuille)
Pull request description:
It seems that LevelDB tends to leave the old "per txid" UTXO entries in the database lying around for a significant amount of time during and after the per-txout upgrade. This introduces a `CompactRange` function in the database wrapper, and invokes it after every batch of updates in `CCoinsViewDB::Upgrade()`. This lowers temporary disk usage during and after the upgrade.
Tree-SHA512: fbf964c0a33f4e73709c999c8a2bfdef974779c15820907398a2f8828f5fa3e4e153ddd9031d6fc5083be81e22b999b9bd826fd063ad8b88f55c5e8342503290
c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
Instead of using ismine to check whether an address can be spent by us,
make the witness version of the script or address first and then use
ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
Also fixes test cases to reflect this change.
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
RewindBlockIndex works over both chainActive - disconnecting blocks
from the tip that need witness verification - and mapBlockIndex -
requiring redownload of blocks missing witness data.
It should never have been the case that the second half is skipped
if we're about to run -reindex-chainstate.
This gives LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
This also calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
df389bc Change wallet method disabled error text (Russell Yanofsky)
e526b3d Fix misleading "Method not found" multiwallet errors (Russell Yanofsky)
Pull request description:
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
Tree-SHA512: 6a8d885283f69bcfc28f2e08ac03eff02f9f8160a312ce2a90d868aa52533434fc0b4c4ab86547c2f09392338956df915637eaf7136a4fc105e6c8179f2d0ac8
72f0060 Replace traditional for with ranged for in primitives (Dag Robole)
Pull request description:
Replace traditional for with ranged for in block and transaction primitives to improve readability
Tree-SHA512: c0fff603d2939149ca48b6aa72b59738a3658d49bd58b2d4ffbc85bdb774d8d5bb808fe526fe22bb9eb214de632834d373e2aab44f6019a83c0b09440cea6528
f228b8e remove some unused functions (Marko Bencun)
Pull request description:
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955e
- SetPort()'s last use removed in
7e195e8
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef and never used
Tree-SHA512: ea8e5498bec981e42e1342c171c37723c2f5e575c7d6c1a524d9c6cd9b332bdd0d84fddf9e14ca011bb49fb82bd037386382c9afc546b3c2231ae548358bd4f4
065039d [tests] Fix incorrect memory_cleanse(…) call in crypto_tests.cpp (practicalswift)
Pull request description:
`chKey` and `chIV` are pointers, not arrays :-)
Probably the result of copy-pasting of old code where the code was operating on arrays instead of pointers.
If I'm reading the code correctly the absence/presence of these `memory_cleanse(…)` calls won't alter the outcome of the test in question (`TestPassphraseSingle`) even if fixed. Therefore removing.
Tree-SHA512: a053b2817bedf6ef889744e546ce9a0f165dee94aef6850d9d6a6bb05b0018789597371ecf154a4aec8588c0ef5626ef08c23c35e35927f6b0497b5f086146fe
a2420ae Avoid unnecessary work in SetNetworkActive (João Barbosa)
Pull request description:
This PR adds an early return to avoid unnecessary notifications when the status doesn't change.
Tree-SHA512: 85d05ca6fa36cb581f94bc154d08bd72cd53f6a857173c6fb2f184058f9c0208c4cf5e5d196825a78339902d8f256688eb6793f99abc7be9c7cfac85136180d9
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
095b917 Avoid using sizes on non-fixed-width types to derive protocol constants. (Gregory Maxwell)
Pull request description:
Thanks to awemany for pointing this out.
This replaces #10172 which appears to be abandoned, but uses the constants as requested on that PR.
Tree-SHA512: 032c0d75b3aaf807a7d0c7fb8ff5515acc45ad58bd00fe81413f900fe02bad900534a970403b9bb568e132c9eddea6043e958daf625e8acc84375bd41ee2e2ef
9f8a46f Properly document target_confirmations in listsinceblock (Ryan Havar)
Pull request description:
There seems to be some misunderstandings about this, but it's a heavily used function so I'd like to make sure the docs are clear about how it works.
For a later issue:
* Change the default of target_confirmations to 6 (1 is a pretty silly default)
* Change the name of target_confirmations (it's really a horrible name)
Tree-SHA512: a2fba2fab30019cea9db56cd7e31de95ba31090617ab336bdf130f9591bfcf3fc5fbd9e7e1e40b6c7bd2f74b9b4658afb1fdc7fc44e1f79520d1319758982a1c
a56f8b0 Add missing lock in CScheduler::AreThreadsServicingQueue() (Matt Corallo)
Pull request description:
Not an actual bug as this is only used in asserts right now, but
nice to not have a missing lock.
Tree-SHA512: 7e542b150a0be716783e196493d239f2ad15e5376abf54b67d735dc3ef1b10849c090337b849f530c9f7497ddcfb8389b47d64a5dcf6382b7d38838f88cc1100
0be03c7 Qt: Use _putenv_s instead of setenv on Windows builds (Brian McMichael)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10836
Error message I would get on `make`:
```
...
CXXLD bench/bench_bitcoin.exe
OBJCXXLD qt/bitcoin-qt.exe
qt/test/test_main.cpp: In function ‘int main(int, char**)’:
qt/test/test_main.cpp:64:43: error: ‘setenv’ was not declared in this scope
setenv("QT_QPA_PLATFORM", "minimal", 0);
^
make[2]: *** [qt/test/qt_test_test_bitcoin_qt-test_main.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make: *** [all-recursive] Error 1
```
`setenv` function is not available from the Microsoft runtime library. Need to use `_putenv_s` instead.
This solution tells the compiler to use `_putenv_s` on `WIN32` compilation (Note: this also works on 64-bit Windows instances.) and `setenv` everywhere else.
I've tested builds on Windows 10 x64 and Ubuntu 16.04 with this code.
Tree-SHA512: d53c996c890e3c6f22b4f2dcca718bef9168f19a6d4a29b8ff13391bfc0c8ea9c1cd16782b47c25b156dcbdff18bb19e23bfd5f6fefb1f373c9d5454a13fc969
99c7fc3 Prevent user from specifying conflicting parameters to fundrawtx (Matt Corallo)
Pull request description:
estimate_mode/conf_target both are overridden by feeRate, so should
not be specified together with feeRate.
Based on #10706
Tree-SHA512: 8ccd08575fd1f2a0d45112538ffbbc73983ee172963230b0cc7ac41d13c6f3c740917f82b212c41ded3a64d873452e7f2c7af49f3b47cab897f8e85117f21333
This assures that we don't overwrite a random file called
`wallet.backup` that happens to be in the current directory. It also
assures that the temporary file will be cleaned up.
Noticed by Evan Klitzke, came up in discussion here:
https://github.com/bitcoin/bitcoin/pull/10880#discussion_r128460722
9737572 [Qt] Use wallet 0 in rpc console if running with multiple wallets (Jonas Schnelli)
Pull request description:
Current master with multiwallet results in accessing wallet 0 in QT (send / receive / tx history / etc.), **but** the RPC console cannot access that wallet (only non-wallet commands work).
This is a quick solution to re-allow accessing the same wallet (Index 0) via RPC console in multiwallet.
The solutions design is not "state of the art" (should go over WalletModel). Ideally we work on an overall multiwallet support for the GUI (which then would remove this change).
I think we should consider this as a bugfix.
Tree-SHA512: 16cf844662248ffd3d82c7d0cbe5879f231fbc7d4f5a4aab4180a9087018519c98301e4ac311eaec2cc39dddf25d3edf9be99a6622ea682c138a820a9b21fd0c
a5ecaf1 Fix misspellings and remove safety verbiage (Steven D. Lander)
Pull request description:
Standardizing punctuation on CLI output and also including a few fixes for grammer. This PR is for text only changes and includes no code edits.
Tree-SHA512: afde551bf1212838822188b6723f2bf1b7222decfa1cd7aa6b04967489108a29f80833af6059252af028c53437755f258275af0614e0d4d0311e09421cd8e131
05e023f Move CloseSocket out of SetSocketNonBlocking and pass SOCKET by const reference in SetSocket* functions (Dag Robole)
Pull request description:
Rationale:
Readability, SetSocketNonBlocking does what it says on the tin.
Consistency, More consistent with the rest of the API in this unit.
Reusability, SetSocketNonBlocking can also be used by clients that may not want to close the socket on failure.
This also moves the responsibility of closing the socket back to the caller that opened it, which in general should know better how and when to close it.
Tree-SHA512: 85027137f1b626e2b636549ee38cc757a587adcf464c84be6e65ca16e3b75d7ed1a1b21dd70dbe34c7c5d599af39e53b89932dfe3c74f91a22341ff3af5ea80a
876e92b Testing: listsinceblock should display all transactions that were affected since the given block, including transactions that were removed due to a reorg. (Karl-Johan Alm)
f999c46 listsinceblock: optionally find and list any transactions that were undone due to reorg when requesting a non-main chain block in a new 'removed' array. (Karl-Johan Alm)
Pull request description:
The following scenario will not notify the caller of the fact `tx0` has been dropped:
1. User 1 receives BTC in tx0 from utxo1 in block aa1.
2. User 2 receives BTC in tx1 from utxo1 (same) in block bb1
3. User 1 sees 2 confirmations at block aa3.
4. Reorg into bb chain.
5. User 1 asks `listsinceblock aa3` and does not see that tx0 is now invalidated.
See `listsinceblock.py` commit for related test.
The proposed fix is to iterate from the given block down to the fork point, and to check each transaction in the blocks against the wallet, in addition to including all transactions from the fork point to the active chain tip (the current behavior). Any transactions that were present will now also be listed in the `listsinceblock` output in a new `replaced` array. This operation may be a bit heavy but the circumstances (and perceived frequency of occurrence) warrant it, I believe.
Example output:
```Python
{
'transactions': [],
'replaced': [
{
'walletconflicts': [],
'vout': 1,
'account': '',
'timereceived': 1485234857,
'time': 1485234857,
'amount': '1.00000000',
'bip125-replaceable': 'unknown',
'trusted': False,
'category': 'receive',
'txid': 'ce673859a30dee1d2ebdb3c05f2eea7b1da54baf68f93bb8bfe37c5f09ed22ff',
'address': 'miqEt4kWp9zSizwGGuUWLAmxEcTW9bFUnQ',
'label': '',
'confirmations': -7
}
],
'lastblock': '7a388f27d09e3699102a4ebf81597d974fc4c72093eeaa02adffbbf7527f6715'
}
```
I believe this addresses the comment by @luke-jr in https://github.com/bitcoin/bitcoin/pull/9516#issuecomment-274190081 but I could be wrong..
Tree-SHA512: 607b5dcaeccb9dc0d963d3de138c40490f3e923050b29821e6bd513d26beb587bddc748fbb194503fe618cfe34a6ed65d95e8d9c5764a882b6c5f976520cff35
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955ee81
- SetPort()'s last use removed in
7e195e8459
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef956 and never used
This commit adds a listwallets RPC, which lists the names of the
currently loaded wallets. This command intentionally shows no
information about the wallet other then the name. Information on
individual wallets can be obtained using the getwalletinfo RPC.
6b8d872 Protect SSE4 code behind a compile-time flag (Pieter Wuille)
fa9be90 Add selftest for SHA256 transform (Pieter Wuille)
c1ccb15 Add SSE4 based SHA256 (Pieter Wuille)
2991c91 Add SHA256 dispatcher (Pieter Wuille)
4d50f38 Support multi-block SHA256 transforms (Pieter Wuille)
Pull request description:
This adds an SSE4 assembly version of the SHA256 transform by Intel, and uses it at run time if SSE4 instructions are available, and use a fallback C++ implementation otherwise. Nearly every x86_64 CPU supports SSE4. The feature is only enabled when compiled with `--enable-experimental-asm`.
In order to avoid build dependencies and other complications, the original Intel YASM code was translated to GCC extended asm syntax.
This gives around a 50% speedup on the SHA256 benchmark for me.
It is based on an earlier patch by @laanwj, though only includes a single assembly version (for now), and removes the YASM dependency.
Tree-SHA512: d31c50695ceb45264291537b93c0d7497670be38edf021ca5402eaa7d4e1e0e1ae492326e28d4e93979d066168129e62d1825e0384b1b906d36f85d93dfcb43c
d9d1bd3 nCheckDepth chain height fix (romanornr)
Pull request description:
````
if (nCheckDepth <= 0)
nCheckDepth = 1000000000; // suffices until the year 19000
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
These lines confuse me.
Correct me if I am wrong, but we can't check any more blocks than we have right?
If someone requests <= 0 it get set it into some huge number and then immediately limit it to the chain height in the following statement.
````
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
when using ````--checkblocks=Z```` When Z is ````0```` or any other negative number, it will check all blocks.
I think it should be changed to this maybe.
````
if (nCheckDepth <= 0 || nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
Which gets rid of that huge number which is confusing for any other altcoins that have a different block time.
Tree-SHA512: 8ee0ae5f33b399fa74dc16926709694ccfe1fc8a043cba2f5d00884220ac1b9b13f2df4588041f4133be634e5c7b14f4eebe24294028dafe91581a97dbe627f3
4dc1915 check for null values in rpc args and handle appropriately (Gregory Sanders)
999ef20 importmulti options are optional (Gregory Sanders)
a70d025 fixup some rpc param counting for rpc help (Gregory Sanders)
Pull request description:
Audited where named args will fail to use correct default values or may fail when additional optional arguments are added.
Previously for these parameters, it was fine to omit them as positional arguments, but it would trigger UniValue runtime errors to set them to null, or to omit them while passing named parameters with greater positions (which would internally set earlier missing arguments to null). Now null values are treated the same as missing values so these errors do not occur.
Included a few other small fixes while working on it.
I didn't bother fixing account-based rpc calls.
Tree-SHA512: 8baf781a35bd48de7878d4726850a580dab80323d3416c1c146b4fa9062f8a233c03f37e8ae3f3159e9d04a8f39c326627ca64c14e1cb7ce72538f934ab2ae1e
6b4f231 Move transaction combining from signrawtransaction to new RPC (Andrew Chow)
Pull request description:
Create a combinerawtransaction RPC which accepts a json array of hex raw transactions to combine them into one transaction. Signrawtransaction is changed to no longer combine transactions and only accept one transaction at a time.
The tests have been updated to test this. Tests for the signrawtransaction merge have also been removed.
This is part of #10570
Tree-SHA512: 035aebbd6537c1c017d5c8e06d309228b4c23fe52d5b31ffde19741c81a11a6346ddbbdc582b77b02a47f4c22b1952b69d3c2ee1109c29b3f0f1b612d8de53ed
