e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
Currently we have no rotation of outbound peers. If an outbound peer
stops serving us blocks, or is on a consensus-incompatible chain with
less work than our tip (but otherwise valid headers), then we will never
disconnect that peer, even though that peer is using one of our 8
outbound connection slots. Because we rely on our outbound peers to
find an honest node in order to reach consensus, allowing an
incompatible peer to occupy one of those slots is undesirable,
particularly if it is possible for all such slots to be occupied by such
peers.
Protect against this by always checking to see if a peer's best known
block has less work than our tip, and if so, set a 20 minute timeout --
if the peer is still not known to have caught up to a chain with as much
work as ours after 20 minutes, then send a single getheaders message,
wait 2 more minutes, and if a better header hasn't been received by then,
disconnect that peer.
Note:
- we do not require that our peer sync to the same tip as ours, just an
equal or greater work tip. (Doing otherwise would risk partitioning the
network in the event of a chain split, and is also unnecessary.)
- we pick 4 of our outbound peers and do not subject them to this logic,
to be more conservative. We don't wish to permit temporary network
issues (or an attacker) to excessively disrupt network topology.
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
A peer could try to waste our resources by sending us unrequested blocks with
low work, eg to fill up our disk. Since
e2652002b6 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip. This commit fixes that behavior.
7a5f930 Avoid slow transaction search with txindex enabled (João Barbosa)
Pull request description:
This is an alternative to #11507 where a slow search is not attempted (in any case) if `txindex` is enabled.
Tree-SHA512: e680621781a9241c0513ddd79d23b0b42f3ccec8a63ed1c926b35c43321c81c39a1028770397dd5070501dcf644d897026a2bd68a161a4b435f19227c1bbca48
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429Fixes#11429
0aacfa4 Remove accidental stray semicolon (practicalswift)
68feb49 Use nullptr instead of NULL (practicalswift)
c6b07fd Fix a vs. an typo (practicalswift)
Pull request description:
Minor cleanups:
* Typo: Fix a vs. an typo
* Typo: Remove accidental stray semicolon (only remaining instance in repo)
* Correctness/consistency: Use `nullptr` instead of `NULL` (only remaining instance in repo)
Tree-SHA512: 47142e557da9d3fa0b532c46edeb7f356a1f6dc5973e60b0e496badff3581ff696eade542d49da777ac7f2e895129cc8487ccdb1984ff828434fa86f9a56dad0
f4c4e38 [trivial] Make namespace explicit for is_regular_file (John Newbery)
Pull request description:
is_regular_file resolves using argument dependent lookup. Make the
namespace explicit so it's obvious where the function is defined.
For those not familiar with argument dependent lookups:
- http://en.cppreference.com/w/cpp/language/adl
- https://en.wikipedia.org/wiki/Argument-dependent_name_lookup
Thanks to C++ guru @ryanofsky for pointing this out to me.
Tree-SHA512: 919f1818081a8f90c5751181f87e13b06d90f8aec0ab873100434e55c85cca6e0e288ecc7f135e19e9b5dba7952e96b6393864b7840e20b69dd40e92a157928b
7104de8 [wallet] Fix leak in CDB constructor (João Barbosa)
Pull request description:
First commit fixes a minor leak.
Second commit improves the constructor in the failure cases.
Tree-SHA512: 5165413d60ed9fc28203c9fe128adbba03a9ea9e9aa3734d9ea2522dafd815ba0fb8b90fd0809dbc06eb3ad360e7764de01dadf653ade3350fe86f6b8f04bc90
207408b Fix crash via division by zero assertion (Jonas Schnelli)
Pull request description:
Replaces the newly added `assert` for a devision by zero protection by a control structure. Floating point division by zero is defined by the floating point standard and results in +inf or -inf.
Introduced in #11133
Reported by @mzhou, fixes#11501
Tree-SHA512: ac9b4efa3ba52a2aa246fb11170128c4aaf829fd491b649524c85069c6ed33ae612e761809aea9d9a44bdea29a417b3f3a558226495094b5070a42a56b2ac77e
258d33b41 [mempool] Mark unaccepted txs present in mempool as 'already there'. (Karl-Johan Alm)
Pull request description:
I was investigating the reasons for failed imports in mempool and noticed that `LoadMempool()` and `pwallet->postInitProcess()` (for all wallets) are executed concurrently. The wallet will end up importing transactions that `LoadMempool()` later tries to import; the latter will fail due to the tx already being in the mempool.
This PR changes the log message, adding an additional "already there" entry. For transactions not accepted into mempool, a check if they are in the mempool is done first, and if found, they are counted as 'already there', otherwise counted as 'failed'.
Also slight rewording for consistency (successes, failed, expired, ... -> succeeded, failed, expired).
Tree-SHA512: 1a6134a25260917f2768365e0dfd8b278fe3f8287cab38bb028b7de3d517718a2d37696186dc7a23ceab338cc755fbbe7d45358ee94e573610fddd2a0620d6e5
43f76f6ac Add missing comma from rescanblockchain (MeshCollider)
Pull request description:
#7061 forgot a comma in the HelpExampleRpc() for the rescanblockchain RPC, giving an incorrect example command output:
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "rescanblockchain", "params": [100000 120000] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
Was just missed during nit-fixing. This is a trivial fix to add that comma in.
Tree-SHA512: b808f32674af585a1ddb78b25621dff0387dbad79c97d65ff61d8a9a12a94e4b8ecf03eda3f281fe439bddb6c0703c39104dbb279f1718949abd930faaa9042f
fe862c5ad Avoid division by zero in the case of a corrupt estimates file (practicalswift)
Pull request description:
Avoid division by zero in the case of a corrupt estimates file.
Tree-SHA512: 285cb0d566f239d260880026a930a7412d86e31ea3819d5371a36364a241dc76164e68c1da6da8369345fa6037ca0abc5ab82d245058c085d5f1fd50111fba48
Now using a std::unique_ptr, the Db instance is correctly released
when CDB initialization fails.
The internal CDB state and mapFileUseCount are only mutated when
the CDB initialization succeeds.
Note that UpdatedBlockTip is also used in net_processing to
announce new blocks to peers. As this may need additional review,
this change is included in its own commit.
This runs Block{Connected,Disconnected}, SetBestChain, Inventory,
and TransactionAddedToMempool on the background scheduler thread.
Of those, only BlockConnected is used outside of Wallet/ZMQ, and
is used only for orphan transaction removal in net_processing,
something which does not need to be synchronous with anything
else.
This partially reverts #9583, re-enabling some of the gains from
#7946. This does not, however, re-enable the gains achieved by
repeatedly releasing cs_main between each transaction processed.
This avoid calling out to mempool state during coin selection,
balance calculation, etc. In the next commit we ensure all wallet
callbacks from CValidationInterface happen in the same queue,
serialized with each other. This helps to avoid re-introducing one
of the issues described in #9584 [1] by further disconnecting
wallet from current chain/mempool state.
Thanks to @morcos for the suggestion to do this.
Note that there are several race conditions introduced here:
* If a user calls sendrawtransaction from RPC, adding a
transaction which is "trusted" (ie from them) and pays them
change, it may not be immediately used by coin selection until
the notification callbacks finish running. No such race is
introduced in normal transaction-sending RPCs as this case is
explicitly handled.
* Until Block{Connected,Disconnected} and
TransactionAddedToMempool calls also run in the CSceduler
background thread, there is a race where
TransactionAddedToMempool might be called after a
Block{Connected,Disconnected} call happens.
* Wallet will write a new best chain from the SetBestChain
callback prior to having processed the transaction from that
block.
[1] "you could go to select coins, need to use 0-conf change, but
such 0-conf change may have been included in a block who's
callbacks have not yet been processed - resulting in thinking they
are not in mempool and, thus, not selectable."
This prevents the wallet-RPCs-return-stale-info issue from being
re-introduced when new-block callbacks no longer happen in the
block-connection cs_main lock
This is both good practice (we want to move all such callbacks
into a background thread eventually) and prevents a lock inversion
when we go to use this in wallet (mempool.cs->cs_wallet and
cs_wallet->mempool.cs would otherwise both be used).
This is currently unused, but will by used by wallet to cache when
transactions are in the mempool, obviating the need for calls to
mempool from CWalletTx::InMempool()
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
8c2f4b888 Expose more parallelism with relaxed atomics (suggested in #9938). Fix a test to check the exclusive or of two properties rather than just or. (Jeremy Rubin)
Pull request description:
This PR is in response to #10026 and some feedback on #9938.
~Locally, all the checkqueue tests ran 3.2X faster on my machine. The worst offender, `test_CheckQueue_Correct_Random` ran 3.4X faster.~
1. ~Removes `GetRand()` and replaces it with a single deterministic FastRandomContext instance.~ #10321 replicated this
1. Exposes more parallelism with relaxed atomics, increasing chance of catching a bug. This does not change performance on my machine.
1. Makes one test case more restrictive (xor instead of or, see #9938).
Tree-SHA512: a59dfbee0273c713525a130dfedc1c7ff26f50c2aaca1e94ef5d759b1d6ea6338ffbd97f863b9f6209750d8a788a15fa8ae1bf26774ed2473c520811337e6b00
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
bfebc0b Remove dead store in ecdsa_signature_parse_der_lax. (Eelis)
Pull request description:
This was one of the issues found by Clang's static analyzer (#9573).
Tree-SHA512: 3674c56ccdc750bfe42e41d56b1f2058b6921c5354f7e757f6af10a759c5be75e23d6c7932a4524b9a24da308f426803b11deffbfcf09a5898a4204ee61d16d2
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
619bb05 Squashed 'src/univalue/' changes from 16a1f7f6e..fe805ea74 (MarcoFalke)
Pull request description:
The subtree-merge commit also fixes the whitespace for failing tests, such that bisect doesn't break.
Finally, the bump also includes the changes that accidentally modified our subtree, such that the subtree check should work fine now:
```sh
./contrib/devtools/git-subtree-check.sh src/univalue
Tree-SHA512: 3009d1e52b6f41ef89ecc8a000649f08e44395538703f294995a6e913e3fbfb7813d6bd31fdb4acb6127fd4af99c095bf980a12f1f026bb27cacc66e1487cd1e
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
c6a995e Improve readability of DecodeBase58Check(...) (practicalswift)
Pull request description:
Use the more readable form ...
```c++
&vchRet[vchRet.size() - 4]
```
... instead of ...
```c++
&v.end()[-n]
```
Has the added benefit of eliminating a spurious static analyzer warning about improper use of negative values.
Tree-SHA512: 5895310c189e9322082c28f34342ff9a6c238e2cae3f204521111c8a7981bc555af60b42de082c91608c1125dfc244a65c4faf929249a067a51435e2be74cb39
ce2418f [gui] reset addrProxy/addrSeparateProxyTor if colon char missing (Cristian Mircea Messel)
Pull request description:
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
Fixes#11209
Tree-SHA512: 2d9e6987cf05af3f41033290b61d00920f7fe4a65bea7efd96ed417a8ca7866d248f091e09947cc8aad3a6a4aa8b7777211cfff7f379a62188be50df2c46d4b2
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
0da49b5 Skip precompute sighash for transactions without witness (Johnson Lau)
Pull request description:
This saves unnecessary hash caching for non-segwit transactions, but I am not sure if the difference is noticeable.
Tree-SHA512: 5cd733a729a52a45781510b3572b26e76837a94155caa14311c6d23a27a12e9613ff278dfc2592e21f640202782f22c5ad00fca85c4de5efacaa617c48ccb08d
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
f35d033 build: Make "make clean" remove all files created when running "make check" (practicalswift)
Pull request description:
Make `make clean` remove all files created when running `make check`. More specifically: remove also `obj/build.h` and `bench/data/block413567.raw.h` as part of `make clean`.
Before this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
Tree-SHA512: 953e8423485ffd415f0ade6abe0b4c407454f67c332140ef019d89db425bb4a831327b3f634b8d69b17325dcfc6e3ac72dc2ba1ce5462158eecc3c05645e93ba
96c2ce9 Fix validationinterface build on super old boost/clang (Matt Corallo)
Pull request description:
This should fix all the non-dependancy issues for termux builds.
See Github issue #11388.
Tree-SHA512: ff0918fa76a6d4639a6c5b5e045ef053ce1d93eb0b1fe94c5fdfcc4d5e54e1118eeb09676ffd8f6d1acd630a63656944c6274ee3dbd7c09b7129c30647dbf4f9
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
More specifically: remove also obj/build.h and bench/data/block413567.raw.h.
Before this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
cffe85f Skip sys::system(...) call in case of empty command (practicalswift)
6fb8f5f Check that -blocknotify command is non-empty before executing (practicalswift)
Pull request description:
Check that `-blocknotify` command is non-empty before executing.
To make the `BlockNotifyCallback(...)` (`-blocknotify`) behaviour consistent with that of:
* `AlertNotify(...)` (`-alertnotify`)
* `AddToWallet(...)` (`-walletnotify`)
Tree-SHA512: 18272166793a5a8b9cc2a727bfbcea53d38c329a55bc975c02db601329d608a61c20e026ce4b616193ecd3810dca4d3e2cb3bf773898a51872008a8dba96763e
6643b80 Add state message print to AcceptBlock failure message. (Matt Corallo)
Pull request description:
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
This was motivated by #11371 which appears to be exactly such a case, and is not debuggable from the information provided. Not sure how much this would have helped in that case, but it is kinda weird that we can reject a block without ever printing why.
Tree-SHA512: 7a1c2c76080b810212da885c38e091609e409c62918cc326bb36a1096e09b2ae7e26fd4bdaefd79863d2894e2823e463005700a524940f177a59ef09f589b2f1
fd86f998f Squashed 'src/secp256k1/' changes from 84973d393..0b7024185 (MarcoFalke)
Pull request description:
The subtree should now match upstream again. Check with:
```sh
./contrib/devtools/git-subtree-check.sh src/secp256k1
```
The changes are only documentation/refactoring related.
Tree-SHA512: 43e8a95bcbfefef9e19ec38a92d2d57fdd4a16ddf726e036d36a0d806eb6f35b45b40ee69f980430e107895ec8725b5de4e36456b026214675e0b19630bb6fe9
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
fafff1220 qa: Restore bitcoin-util-test py2 compatibility (MarcoFalke)
Pull request description:
Currently `./configure && make check` will look for python3, then python2. As long as we support python2 (and use it as fallback), `make check` should run fine with both python2 and python3.
Fixes#11352 by @Zenitur
Tree-SHA512: a335ebdd224328d6f924fe52a9b97de196926476c9ee04ce3280743ea93bcae355eb2d5d4bed4050c01b2e904105595eac7db2eaa9307207581caa0a98ebcc0b
This fixes "Wallet file not specified" errors when making batch wallet RPC
calls with more than one wallet loaded. This issue was reported by
NicolasDorier <nicolas.dorier@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so
this change has no other effects.
Fixes#11257
Sending a getheaders message with an empty locator and a stop hash
is a request for a single header by hash. The node will respond with
headers for blocks not in the main chain as well as those in the main
chain. To avoid fingerprinting, the node should, however, ignore
requests for headers on side branches that are too old.
46ce223d1 Add tests for CMerkleBlock usage with txids specified (James O'Beirne)
5ab586f90 Consolidate CMerkleBlock constructor into a single method (James O'Beirne)
Pull request description:
What started as a simple task to add test coverage ended up giving way to a light refactoring. This consolidates the mostly-identical `CMerkleBlock` constructors into one (using C++11 constructor delegation) and adds coverage for the by-txids construction case.
### Before
### After
Tree-SHA512: eed84ed3e8bfc43473077b575c8252759a857e37275e4b36ca7cc2c17a65895e5f494bfd9d4aeab09fc6e98fc6a9c641ac7ecc0ddbeefe01a9e4308e7909e529
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
5ddf560 script: Change SignatureHash input index check to an assert. (Jim Posen)
Pull request description:
In the SignatureHash function, the input index must refer to a valid index. This is not enforced equally in the segwit/non-segwit branches and should be an assertion rather than returning a error hash.
Tree-SHA512: a775fc9e9bd9835c0ab36368aa45ab3d53e38f31fd4d2b8684a77ee6028c854c363df038681a59358b30138957573ad63b71d4a722c16e0830fb4fa72669ef39
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
92848e5 Remove unused fTry from push_lock (João Barbosa)
Pull request description:
After #9674 (618ee92) the `fTry` argument in `push_lock` is no longer needed.
Tree-SHA512: a461f2ca9e590a9dfcc7814d9852d85f03712cb4735176b8b2db0e8dc731597c2a515650998ca7d53cf5a0c48b408a974a0704897036c6ed74788fc24c5e73ae
d601f16 Fix invalid memory access in CScript::operator+= (Anthony Towns)
Pull request description:
This is a fix for #11114 -- invoking "s += s" gets turned into "s.insert(s.end(), s.begin(), s.end())" which can result in an invalid memory access is s.capacity() < 2*s.size() (because s gets resized and possibly moved, so s.begin() and s.end() become invalid references when reading the values to be appended).
The fix is straightforward: reserve enough space in advance, so that insert() doesn't need to resize and thus its arguments remain valid.
A simple test case is added as well; though you probably need to run it via valgrind to actually catch the problem when it's not fixed...
Tree-SHA512: 4720d0c17463fdc43b344c45fe603423d20b30d48da1b9d85eeedc505d7f34db1ed5495ef1556459ae962a94717e3c6e8fc441763771901efea210d01322b7ef
bb8376b Verify DBWrapper iterators are taking snapshots (Matt Corallo)
Pull request description:
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
Tree-SHA512: 54f24dabc294962e9c20882f61809604421a661208d1568bb107102248603e8e7c12e929ccb0812a73d4e4f23fea61f1b48e7cc24da5a7260f1d14d89ba88cd6
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
cee28fbc3 Add error string for CLEANSTACK script violation, preventing an "unknown error" if the CLEANSTACK error condition is set. (Mark Friedenbach)
Pull request description:
This prevents an unhelpful "unknown error" from being printed in test logs if the CLEANSTACK error condition is set.
Tree-SHA512: cd6764e930184aef3d662e40c67f2ea8aea8552a26d33a567d0315a19d707a82aa2afad9f48ecbb731aa5b77fbbfbd7a6a3a989fdb1424a1181350052ff2a9b5
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
6f33d8c Correct typo in comments (Johnson Lau)
Pull request description:
I think this is a search and replace mistake
Tree-SHA512: a83e081b817f1607496bfdcee47593d45d75cbe72effe944cdb5494b49a341eeeebdeb954f6db59dfa1ddfa350a117a4b26c754725a3459be78f2a1a093c6fde
8213838 [Qt] tolerate BIP173/bech32 addresses during input validation (Jonas Schnelli)
06eaca6 [RPC] Wallet: test importing of native witness scripts (NicolasDorier)
fd0041a Use BIP173 addresses in segwit.py test (Pieter Wuille)
e278f12 Support BIP173 in addwitnessaddress (Pieter Wuille)
c091b99 Implement BIP173 addresses and tests (Pieter Wuille)
bd355b8 Add regtest testing to base58_tests (Pieter Wuille)
6565c55 Convert base58_tests from type/payload to scriptPubKey comparison (Pieter Wuille)
8fd2267 Import Bech32 C++ reference code & tests (Pieter Wuille)
1e46ebd Implement {Encode,Decode}Destination without CBitcoinAddress (Pieter Wuille)
Pull request description:
Builds on top of #11117.
This adds support for:
* Creating BIP173 addresses for testing (through `addwitnessaddress`, though by default it still produces P2SH versions)
* Sending to BIP173 addresses (including non-v0 ones)
* Analysing BIP173 addresses (through `validateaddress`)
It includes a reformatted version of the [C++ Bech32 reference code](https://github.com/sipa/bech32/tree/master/ref/c%2B%2B) and an independent implementation of the address encoding/decoding logic (integrated with CTxDestination). All BIP173 test vectors are included.
Not included (and intended for other PRs):
* Full wallet support for SegWit (which would include automatically adding witness scripts to the wallet during automatic keypool topup, SegWit change outputs, ...) [see #11403]
* Splitting base58.cpp and tests/base58_tests.cpp up into base58-specific code, and "address encoding"-code [see #11372]
* Error locating in UI for BIP173 addresses.
Tree-SHA512: 238031185fd07f3ac873c586043970cc2db91bf7735c3c168cb33a3db39a7bda81d4891b649685bb17ef90dc63af0328e7705d8cd3e8dafd6c4d3c08fb230341
This eases the during-type validation to allow Bech32 chars.
Once the focus has been lost, the address will be properly verified through IsValidDestinationString
b887676 net: remove now-unused functions (Cory Fields)
45fd754 net: remove now-superfluous numeric resolve (Cory Fields)
2416dd7 net: separate resolving and conecting (Cory Fields)
Pull request description:
This is a greatly simplified version of #10285, which only aims to address async resolving.
It essentially breaks up two wrapper functions for things only used in one place (ConnectSocketDirectly/ConnectThroughProxy) in favor of calling them directly. This allows us to fully handle resolves before attempting a connection, as is necessary for async connections.
As a bonus, I believe the logic is now much easier to follow than before.
Tree-SHA512: f03f618107379edf3efe2a9f3e3677e8f075017ab140a0b4fdc3b8263e6beff148d55256263ab10bc2125ef089ca68e0d8e865beeae176f1eca544e769c976d3
395cef7 Change getmininginfo errors field to warnings (Andrew Chow)
8502b20 Unify help text for GetWarnings output in get*info RPCs (Andrew Chow)
f77f0e4 Add warnings field to getblockchaininfo (Andrew Chow)
Pull request description:
The `getblockchaininfo` output does not contain the `errors` field which the `getinfo`, `getmininginfo`, and `getnetworkinfo` RPCs have. It should have it as the errors pertain to the blockchain. This PR adds that field.
This PR also unifies the help text for the `errors` field and its output position so that all of the `get*info` commands are consistent.
`getnetworkinfo`'s `errors` field is named `warnings`. I did not change this even though it is inconsistent since this naming has been in use for a long time.
Tree-SHA512: 385ab6acfee67fc8816f4d51ab2bd7a623264c7973906dfbab0a171f199e9db16fde19093a5bc3dfbdd4ff5f19d2186b646eb6b3bae0a4d7c9add43650a4a9d9
5e69a43 Add test for bitcoin-cli -getinfo (John Newbery)
3826253 rpc: Handle `getinfo` locally in bitcoin-cli w/ `-getinfo` (Wladimir J. van der Laan)
Pull request description:
Since @laanwj doesn't want to maintain these changes anymore, I will.
This PR is a revival of #8843. I have addressed @jnewbery's comments.
Regarding atomicity, I don't think that is a concern here. This is explicitly a new API and those who use it will know that this is different and that it is not atomic.
Tree-SHA512: 9664ed13a5557bda8c43f34d6527669a641f260b7830e592409b28c845258fc7e0fdd85dd42bfa88c103fea3ecdfede5f81e3d91870e2accba81c6d6de6b21ff
22f816ef4 net: Improve and document SOCKS code (Wladimir J. van der Laan)
Pull request description:
Make the SOCKS code more consistent, and document the constants used.
Tree-SHA512: 1bb04fcd6aacb6bfd2c54989d8298c892036466a895efb88be36fbace041af67c964ae0f5fb76c96f813f20a040109de4e0aac49a20844640e4d7633fcb22f25
In the SignatureHash function, the input index must refer to a valid
index. This is not enforced equally in the segwit/non-segwit branches
and should be an assertion rather than returning a error hash.
This adds the infrastructure `BaseRequestHandler` class that takes care
of converting bitcoin-cli arguments into a JSON-RPC request object, and
converting the reply into a JSON object that can be shown as result.
This is subsequently used to handle the `-getinfo` option, which sends
a JSON-RPC batch request to the RPC server with
`["getnetworkinfo", "getblockchaininfo", "getwalletinfo"]`,
and after reply combines the result into what looks like a `getinfo`
result.
There have been some requests for a client-side `getinfo` and this
is my PoC of how to do it. If this is considered a good idea
some of the logic could be moved up to rpcclient.cpp and
used in the GUI console as well.
Extra-Author: Andrew Chow <achow101@gmail.com>
Changes the errors field to warnings. To maintain compatibility,
the errors field is deprecated and enabled by starting bitcoind with
-deprecatedrpc=getmininginfo
048e0c3e2 [rpc] [tests] Add deprecated RPC test (Cristian Mircea Messel)
d4cdbd6fb [rpc] Deprecate estimatefee RPC (John Newbery)
Pull request description:
Deprecates estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<methodname>` argument. RPC method is removed entirely in version
(x+1).
This gives users fair warning that an RPC is to be removed, and time to change client software if necessary. Deprecation warnings in RPC return values or release notes are easily ignored.
This is a more generic version of the approach I tried to use in #10841, which too late to make it into v0.15.
Tree-SHA512: 9695a600e84b812974387333e4a6805d18972da30befb754e9e4da77cd9815d00c5cc2ee0b0350bdbbdb5fdc6ba47789f8b2c6f5b15c8cd5a1deefcc4832da30
603efe9fc Fix parameter name typo in ErasePurpose walletdb method. (Pierre Rochard)
Pull request description:
The header file has the correct method signature and the one usage in CWallet::DelAddressBook is correctly passing in EncodeDestination(address)
Tree-SHA512: ee0808a74111fd23a1c47ba5ab51de151fdd33a01d92895671e562ac184cbcb33180a3ff26c22e5717595592097b9fa33deca9878d89ce8d34687f09cfadfcf0
7b137aced [Qt] Add delay before filtering transactions Fixes 3141 (Lucas Betschart)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/issues/3141.
This adds a QTimer pause of 200ms before start to filter so it should be possible to filter big data sets easier.
Tree-SHA512: ee599367794eac2c5b8bc7ecac47f44295e40c0ff543ff2f2c4860590f917b59b1cfb273fa564e6eb4c44016c0ef412d49f1a8f1b36b07e034022f51bb76653c
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
Deprecate estimatefee in v0.16, for final removal in v0.17.
This commit introduces a phased removal of RPC methods. RPC method is
disabled by default in version x, but can be enabled by using the
`-deprecatedrpc=<method>` argument. RPC method is removed entirely in
version (x+1).
d01a968 wallet: update stored witness in AddToWallet (Suhas Daftuar)
Pull request description:
Replace witness-stripped wallet transactions with full transactions;
this can happen when upgrading from a pre-segwit wallet to a segwit-
aware wallet.
Tree-SHA512: a348b16b38ae738fa75cf7d3ff50ebd0d0071d5d6061c9a10dc3325fc34f6bc96a67aea21fde460ca20f6178768ee0af04d6d8785b35647f436a9083c4270b07
df10edf More user-friendly error message when partially signing (MeshCollider)
Pull request description:
When partially signing a transaction using `signrawtransaction`, if the wallet doesn't have access to a key, it will output a scary error message `"error": "Operation not valid with the current stack size"`, yet it will partially sign the transaction anyway. This puts a lot of users off, because they don't realise the signing actually succeeded for some inputs. This catches that specific error when signing, and outputs a friendlier message which says `Unable to sign input, invalid stack size (possibly missing key)`.
This is the best way I could think of to fix the issue, but please let me know if you come up with a better way to do it :)
Fixes https://github.com/bitcoin/bitcoin/issues/9988
Tree-SHA512: 65e1d4a49caa4202e1357b0b3f42329d76456c7b4286d63232226e03267809027b0c44e0faaa1da8b86c9ad677e3a3d655698a24fc870d6a661203c9f56ef95b
Prevent arbitrary files from being overwritten. There have been reports
that users have overwritten wallet files this way. It may also avoid
other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
28d4542 Disallow uncompressed pubkeys in bitcoin-tx [multisig] output adds (Matt Corallo)
Pull request description:
Does what it says on the tin.
Tree-SHA512: 324b8da8a9f9a35d3ade74f6c587f981894a085dfea9d64f78de745d5e6ec05c3a7bced487e9aad9c8a48151cd14969a0806f30f80b621edfce0da082fe6f4be
13baf72 Replace save|restoreWindowGeometry with Qt functions (MeshCollider)
Pull request description:
Alternative to https://github.com/bitcoin/bitcoin/pull/11208, closes https://github.com/bitcoin/bitcoin/issues/11207
According to the [Qt documentation](https://doc.qt.io/qt-4.8/qwidget.html#restoreGeometry), restoreGeometry does all the checks we need, so it would be better to rely on them instead of doing it ourselves.
~Haven't tested this properly yet, hence the WIP.~
Gives expected behavior exactly as the other system apps do based on my tests. Only potential issue is the case when the GUI is almost entirely offscreen with only a single strip of pixels, its not really possible to see the GUI, but if you know it's there you can bring it back onscreen with just the mouse. And that's exactly how notepad behaves on Windows so I don't think its a real issue.
This also gives much better behavior when closing a maximized window, currently (0.15.0 release) a maximized window will save the window size on close, and then reopen as a not-maximized but still that size, which is really annoying. This reopens as maximized.
Gitian build here: https://bitcoin.jonasschnelli.ch/build/305
Tree-SHA512: a8bde14793b4316192df1fa2eaaeb32b44d5ebc5219c35252379840056cd737a9fd162625fd715987f275fec8375334ec1ec328dbc671563f084c611a938985c
723aa1b qt: Backup former GUI settings on `-resetguisettings` (Wladimir J. van der Laan)
Pull request description:
Writes the GUI settings to `guisettings.bak` in the data directory before wiping them. This can be used to retroactively troubleshoot issues (e.g. #11262) where `-resetguisettings` solves the problem.
(as discussed in yesterday's IRC meeting)
Tree-SHA512: c64f5052d992eb02057ba285435f143c42d0cc456144a4c565e1c87be833737f9df750d0aee10810f85047c820d9b4f9f22fd94a6f09f4b28a9cf41b63a56586
Writes the GUI settings to `guisettings.bak` in the data directory
before wiping them. This can be used to retroactively troubleshoot
issues (e.g. #11262) where `-resetguisettings` solves the problem.
3a131b724 Rename out to m_tx_out in CScriptCheck (Johnson Lau)
e91211878 [Refactor] Combine scriptPubKey and amount as CTxOut in CScriptCheck (Johnson Lau)
Pull request description:
This simplifies CScriptCheck by combining scriptPubKey and amount
Tree-SHA512: 6422363cf5394c6cfefb30c1709db6def63230b809cc7697887e4a2e8c684149208edf91dd139e031b9fe732776b2db59305f77c3cba6f333b11cceb39ef0cc2
22fd04beb Remove nBlockMaxSize from miner opt struct as it is no longer used. (Gregory Maxwell)
Pull request description:
Tree-SHA512: f7a0fa380b4173120f33f96de90581cb57b8bd7af50996f0c726845acff7b92bb1212b924495ef89645624239d2b60d19c1cee2a13139b00e917154a33f7da4c
A C-style cast is equivalent to try casting in the following order:
1. const_cast(...)
2. static_cast(...)
3. const_cast(static_cast(...))
4. reinterpret_cast(...)
5. const_cast(reinterpret_cast(...))
By using static_cast<T>(...) explicitly we avoid the possibility
of an unintentional and dangerous reinterpret_cast. Furthermore
static_cast<T>(...) allows for easier grepping of casts.
In the case of CKey's destructor, it seems to have been an oversight in
f4d1fc259 not to delete it. At this point, it results in the move
constructors/assignment operators for CKey being deleted, which may have
a performance impact.
2a07f878a Refactor: Modernize disallowed copy constructors/assignment (Dan Raviv)
Pull request description:
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
Tree-SHA512: 878f446be5a136bb2a90643aaeaca62948b575e6ef71ccc5b4b8f373e66f36ced00665128f36504e0ccfee639863d969329c4276154ef9f2a9de9137f0801e01
7a1e873 [script] Unit tests for IsMine (Jim Posen)
d7afe2d [script] Unit tests for script/standard functions (Jim Posen)
Pull request description:
Simply adding unit test coverage.
Tree-SHA512: aaf16b1b07b6d43c884a67f4fd5f83c31bf2c560f78798036d7aa37a3efe71a7ca3c82c4b3ba1f3119bcbe3b78013e64bb0020fe57ebc69aea1cb54943881959
05cae8aef range-based loops and const qualifications in net.cpp (Marko Bencun)
Pull request description:
Plus a use of std::copy() instead of manual copying.
(The loop on line 117 is already done in #10493).
Tree-SHA512: d9839e330c71bb9781a4efa81ee353c9e3fd8a93c2120a309f7a0e516b119dd7abe0f0988546797801258b867a29581978515c05dda9e5b23097e15f705139b4
by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
fdc3293 Document assumptions that are being made to avoid NULL pointer dereferences (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made avoid `NULL` pointer dereferences.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential `NULL` pointer dereferences are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: b424328195e2680e1e4ec546298f718c49e5ad182147dc004de580693db1b50eec4065e1c4f232bdb302baa12954265a50ba21cb5ba4ff30248535b2de778672
e53fa4a Remove custom fee radio group (Andrew Chow)
Pull request description:
Removes the extraneous custom fee radio group and its single radio button. The radio button is replaced with a label that has the radio button's text.
Continuation of #11332
Tree-SHA512: b47b675f900ee4e2f4823203a42bb697f707ba67a8504d730c53d4dae511d0ed03226af34efd7ea45570c6111f8b3b6c39ac28f1b5c090de225903442ad4159a
fadf31e wallet: Display non-HD error on first run (MarcoFalke)
Pull request description:
On current master a fresh wallet created with `-usehd=0` is silently created as HD wallet.
An error should be displayed on the first run.
Also, this restores a test that was removed in c22a53cFixes: #11313
Tree-SHA512: 226a4129984324f88a431c7e2726383f6841711f0227d8e9f5b4f89d4bb9f2b8e922e6cf0a6f91d6efa747d139543a236b9f29326fc5d1e5d6f1dea2465d9b85
This was added in order to help OpenNetworkConnection avoid creating a
connection that it would end up aborting. It was necessary because resolving
was done as part of the connection process.
Now that resolving is separated from connecting, this case is detected before
the connection is attempted.
ConnectSocketByName handled resolves as necessary, obscuring the connection
process. With them separated, each can be handled asynchronously.
Also, since proxies must be considered now anyway, go ahead and eliminate the
ConnectSocket wrapper and use ConnectSocketDirectly... directly.
a0b4c2461 Trivial: Fix validation comments (Dan Raviv)
Pull request description:
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Tree-SHA512: ff86ff02c993e8317b9a0decfe5f5b6aae77b7d50e2b253ed73eb553348142bfc30cfeda15fae91907bab8f920e0ea7c52714f4cc7f33a9d6a777f708e2c99ba
std::unordered_map::erase( const_iterator pos ) returns an iterator to the element following the removed one. Use that to optimize (probably minor-performance-wise, and definitely code-structure-wise) the implementation of CCoinsViewCache::BatchWrite().
Use C++11's better capability of expressing an interface of a non-copyable class by publicly deleting its copy ctor and assignment operator instead of just declaring them private.
1444c2e Switch memory_cleanse implementation to BoringSSL's to ensure memory clearing even with link-time optimization. (Adam Langley)
Pull request description:
The implementation we currently use from OpenSSL prevents the compiler from optimizing away clensing operations on blocks of memory that are about to be released, but this protection is not extended to link-time optimization. This commit copies the solution cooked up by Google compiler engineers which uses inline assembly directives to instruct the compiler not to optimize out the call under any circumstances. As the code is in-lined, this has the added advantage of removing one more OpenSSL dependency.
Regarding license compatibility, Google's contributions to BoringSSL library, including this code, is made available under the ISC license, which is MIT compatible.
BoringSSL git commit: ad1907fe73334d6c696c8539646c21b11178f20f
Tree-SHA512: 8134998663c1501e3ce48fbbd6ab41de981f0855e3f4d25d2e86ff8056c917d82c751c88e9c39660319ebfbc8283dce594c3e4fc7f87080a212a2cdba57ea511
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Make the non-const overload of CBlockIndex::GetAncestor() reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
cdaf3a1 Fix Qt 0.14.2->0.15.0 segfault if "total at least" is selected (Matt Corallo)
Pull request description:
`QButtonGroup->button()` may return a nullptr.
Accessing the object directly with `setChecked` seems fragile.
This is a simple fix to ensure to never call a button out of bounds (nullptr).
There are probably other places where a sanity check for `QSettings` are required.
Found by @achow101.
Code by @TheBlueMatt.
Tree-SHA512: a1b5d6636382a4e20c4e66ef82de19e6daa8b1b5f21b0f2bc5f51cfb6b37797045c7e29ebead8088ee2b990ed12c549c217cae6aad7566319599d086d526f6dc
5acd82de9 rpc: make estimatesmartfee argument naming consistent with documentation (Wladimir J. van der Laan)
24697c40e rpc: update cli for estimatefee argument rename (Wladimir J. van der Laan)
Pull request description:
The first argument of `estimaterawfee` was renamed from `nblocks` to `conf_target` in 06bcdb8da6. Update the client-side table as well.
This makes #10753 pass again.
Tree-SHA512: 107c0072a45e0f4e083dc803d534973e6bd4c005e62337a867815d7c98ab1c21d97b7a495c32763883975cbbb001b80003001a6709b7d9bdd81ce4d441b667be
Combine fLimitFree and fOverrideMempoolLimit into a single boolean:
bypass_limits. This is used to indicate that mempool limiting based on feerate
should be bypassed. It is used when readding transactions from a reorg and then
the mempool is trimmed to size after all transactions are added and they can be
evaluated in the context of their descendants. No changes to behavior.
b86a42077 when clearing addrman clear mapInfo and mapAddr (Gregory Sanders)
Pull request description:
Power failure on my machine resulted in a corrupted addrman that would hit bad assertions when trying to serialize the "cleared" addrman to disk: 6866b4912b/src/addrman.h (L320)
Tree-SHA512: 07ca8b6cbd88407e5f3f0dccb346ae31bd1392f4210b2d5c5647c853986bfec95cf70240b92bafdc61b90e452a5d8315962738d10c10c2b53fdabff10503d05a
This resolves an issue where estimatesmartfee would return 999
sat/byte instead of 1000, due to floating point loss of precision
Thanks to sipa for suggesting is_integral.
We were saving a div by caching the inverse as a float, but this
ended up requiring a int -> float -> int conversion, which takes
almost as much time as the difference between float mul and div.
There are lots of other more pressing issues with the bench
framework which probably require simply removing the adaptive
iteration count stuff anyway.
No sensible user will ever keep the default settings here, so not
having sensible defaults only serves to screw users who are
paying less attention, which makes for terrible defaults.
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
f151f5f50 [macOS] remove Growl support, remove unused code (Jonas Schnelli)
Pull request description:
There is no longer a reason to support Growl.
A) It went to pay-ware since a couple of years
B) Since OSX 10.8, the operating system has its own modal notification options (Notification Center).
This PR removes support for Growl.
OSX notification centre is still supported after this PR.
Tree-SHA512: eee18098d7354c4e98f927bca9963d4843ff6bceee74795f73a66c27eed33efaac00ec2cabde8807efcbc936b16ab712249006fa13f5a3f55e4d44d163f5f9a0
713a92073 Remove usehd option and warn when it is used (Andrew Chow)
d4c18f733 Bump wallet version number to 159900 (Andrew Chow)
Pull request description:
Bump the wallet version number to 159900 so that new wallets made without a default key will no longer work on previous versions at all. Also remove the `usehd` option to avoid weird interaction with wallet version numbers and HD-ness of wallets.
Tree-SHA512: dd7965505bfad6a926c79afd423236f509229a398a8398076f8d57d90a5974243f9459a61225c4daee560c796f427445c9e55a3ad528a3a97a9123ca6a1269ab
5d2a3995e [trivial] fixup comment for VerifyWallets() (John Newbery)
43b0e81d0 [wallet] Add StartWallets() function to wallet/init.cpp (John Newbery)
290f3c56d [wallet] Add RegisterWalletRPC() function to wallet/init.cpp (John Newbery)
062d63102 [wallet] Add CloseWallets() function to wallet/init.cpp (John Newbery)
77fe07c15 [wallet] Add StopWallets() function to wallet/init.cpp (John Newbery)
2da5eafa4 [wallet] Add FlushWallets() function to wallet/init.cpp (John Newbery)
1b9cee66e [wallet] Rename WalletVerify() to VerifyWallets() (John Newbery)
9c76ba18c [wallet] Rename InitLoadWallet() to OpenWallets() (John Newbery)
Pull request description:
Apologies for the mostly code move only PR. This is a pre-req for both #10740 and #10762
All wallet component initialization/destruction functions are now in their own `wallet/init.cpp` translation unit and are no longer static functions on the CWallet class. The bitcoin_server also no longer has any knowledge that there are multiple wallets in vpwallet.
There should be no changes in behavior from this PR.
Tree-SHA512: 7c260eb094f2fa1a88d803769ba60935810968a7309f731135e4b17623b97f18c03bbcd293c942093d1efce62c6c978f9ff484d54dc9a60bc2fcb5af2d160fcd
Rationale:
- this init function can now open multiple wallets (hence
Wallet->Wallets)
- This is named as the antonym to CloseWallets(), which carries out the
opposite action.
592404f03 Changing &vec[0] to vec.data(), what 9804 missed (MeshCollider)
Pull request description:
This just continues the work of https://github.com/bitcoin/bitcoin/pull/9804
Modifies a lot of `&vector[]`'s to `vector.data()`'s across all the files including tests, just the stuff that 9804 missed
Tree-SHA512: dd1a9dffb999dea4fba78dcc91fe02f90250db86f5c74948e1ff3e8b4036b2154b600555eaa04dece5368920aae3513bc36425dc96e4319ca1041b0928a6b656
2525b972a net: stop both net/net_processing before destroying them (Cory Fields)
80e2e9d0c net: drop unused connman param (Cory Fields)
8ad663c1f net: use an interface class rather than signals for message processing (Cory Fields)
28f11e940 net: pass CConnman via pointer rather than reference (Cory Fields)
Pull request description:
See individual commits.
Benefits:
- Allows us to begin moving stuff out of CNode and into CNodeState (after #10652 and follow-ups)
- Drops boost dependency and overhead
- Drops global signal registration
- Friendlier backtraces
Tree-SHA512: af2038c959dbec25f0c90c74c88dc6a630e6b9e984adf52aceadd6954aa463b6aadfccf979c2459a9f3354326b5077ee02048128eda2a649236fadb595b66ee3
fe09b0197 add missing lock to crypter GetKeys() (Marko Bencun)
5cb3da04b keystore GetKeys(): return result instead of writing to reference (Marko Bencun)
Pull request description:
Issue: #10905
First commit makes GetKeys() return the result instead of writing to a reference to remove some useless lines.
Tree-SHA512: bb51255b5a6cf5488c3d5dee89f539d41f0717f018441d120047f877e0a705a133fb3b7a97d1cf8f73b5d2ed93dd2dbdfcd6f394e40105af2a12e01d397cb402
061297f0a Ensure that data types are consistent (jjz)
Pull request description:
1. nStatus of CBlockIndex is consistent with the definition of Enum(BlockStatus)
2. The BlockHeader is consistent with the type of variable defined in CBlockHeader
Tree-SHA512: 3d4a55c62d3e17b9c83807eae153db4fcfcd8477c9413a45dedfa157563e77b775a66974648d28c9d44ac45a5705eef83b31a8a3b44316dc9814b85526a9d034
c8d38abd6 Refactor tipUpdate as per style guide (MeshCollider)
3b69a08c5 Fix division by zero in time remaining (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10291, https://github.com/bitcoin/bitcoin/issues/11265
progressDelta may be 0 (or even negative according to 11265), this checks for that and prints unknown if it is, because we cannot calculate an estimate for the time remaining (would be infinite or negative).
Tree-SHA512: bc5708e5ed6e4670d008219558c5fbb25709bd99a32c98ec39bb74f94a0b7fa058f3d03389ccdd39e6723e6b5b48e34b13ceee7c051c2db631e51d8ec3e1d68c
9b348ff9e Fix memory leaks in qt/guiutil.cpp (Dan Raviv)
Pull request description:
on macOS:
`listSnapshot` was leaking in `findStartupItemInList()`
`bitcoinAppUrl` was leaking in `[Get|Set]StartOnSystemStartup()`
Tree-SHA512: dd49e1166336cf4f20035d21930f2f99f21f1d9f91a1101b1434a23dd0b92d402ac7efb177473c758d8af1dbab8d8750485583231c5b5854203d2493f0b43e73
ee4d1493e Drop upgrade-cancel callback registration for a generic "resumeable" (Matt Corallo)
Pull request description:
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "cancelable" boolean, as StartShutdown
is pretty much always what you'll want to use to cancel. Use the
same boolean to allow cancel during initial block verification.
Tree-SHA512: 515817aaa4b9e3e856200e00be9c2d44ecfa2d4f288fe3e02116105fe85de2650c13076ee7e45396ec1ce6ab45e53b0477cddda7cfdee5b3bd0589cb81a4c346
d2be7b25b Typo in optionsdialog.ui Tooltip displayed ampersand incorrectly, & should be in text. (James Evans)
Pull request description:
Tooltip displayed ampersand incorrectly, & should be in text property rather than tooltip so that access key is correctly displayed for accessibility.
Tree-SHA512: 331848207317d37d4d9db40119d0b7ae9a276d06cd1b057cd0e87d508e1aa769b785246ca30ca9156db632798ec9f68ba8bf78cf42904267b4187bd27cfced35
1. nStatus of CBlockIndex is consistent with the definition of Enum(BlockStatus)
2. The BlockHeader is consistent with the type of variable defined in CBlockHeader
ca67ddf0b Move the AreInputsStandard documentation next to its implementation (esneider)
Pull request description:
The documentation (and rationale) for `AreInputsStandard` somehow got separated from its implementation, and creates a bit of confusion: it's in the middle of the file, next to the implementation of `IsStandard`, which actually checks the "standardness" of outputs, not inputs.
Tree-SHA512: 71281cbcbc5a5701cc11e812a3e90669dda3d92dc2176b512b7832d79b08b34307999c984516bb0c56b01db9b03a12ee4755f662efc1158f4e126de5ca421999
aece8a463 (finally) remove getinfo in favor of more module-specific infos (Matt Corallo)
Pull request description:
I see no reason not to have done this in 0.13, let alone for 0.15.
Tree-SHA512: ed3e36f99e9cb90304089e5957ddfbf74141e3e77d850e498e9e45dd8bc1deb9fe36b3fec4c43243023268670a45808de3c23d660df76fa27db6688814c464a5
There are a few too many edge-cases here to make this a scripted diff.
The following commits will move a few functions into PeerLogicValidation, where
the local connman instance can be used. This change prepares for that usage.
478d4fb79 [docs] explain how to recompile only what bitcoind tests need (Sjors Provoost)
Pull request description:
It was not obvious to me to run `make` inside the test directory, especially because `make src/test` and `make src/test/test_bitcoin` result in `make: Nothing to be done for ...`.
Tree-SHA512: 5fe66c45c50af42d4fed42e3008b1dc4de7ea448f5265a34f4b2f355aa4a48a8187918a49fc9f82e8dd9706bc72c59d0fd67d86057fd816eb317832e46ada7ba
c00199244 Fix potential null dereferences (MeshCollider)
Pull request description:
Picked up by the static analyzer [Facebook Infer](http://fbinfer.com/) which I was playing around with for another research project. Just adding some asserts before dereferencing potentially null pointers.
Tree-SHA512: 9c01dab2d21bce75c7c7ef867236654ab538318a1fb39f96f09cdd2382a05be1a6b2db0a1169a94168864e82ffeae0686a383db6eba799742bdd89c37ac74397
1aa97ee08 Add savemempool RPC (Lawrence Nahum)
467cbbcbf Add return value to DumpMempool (Lawrence Nahum)
Pull request description:
Adds a simple parameterless rpc command to dump the mempool.
Rationale:
Sometimes there can be a crash for whatever reason (bug, power loss, etc) causing the mempool.dat file to not be saved.
This change allows to script/cron the rpc call to have more regular saves to the file as well as cli/ad-hoc.
This should solve issue https://github.com/bitcoin/bitcoin/issues/11086
Tree-SHA512: e856ae9777425a4521279c9b58e69285d8e374790bebefd3284cf91931eac0e456f86224f427a087a01bf70440bf6e439fa02c8a34940eb1046ae473e98b6aaa
The implementation we currently use from OpenSSL prevents the compiler from optimizing away clensing operations on blocks of memory that are about to be released, but this protection is not extended to link-time optimization. This commit copies the solution cooked up by Google compiler engineers which uses inline assembly directives to instruct the compiler not to optimize out the call under any circumstances. As the code is in-lined, this has the added advantage of removing one more OpenSSL dependency.
Regarding license compatibility, Google's contributions to BoringSSL library, including this code, is made available under the ISC license, which is MIT compatible.
BoringSSL git commit: ad1907fe73334d6c696c8539646c21b11178f20f
864cd2787 Move CBitcoinAddress to base58.cpp (Pieter Wuille)
5c8ff0d44 Introduce wrappers around CBitcoinAddress (Pieter Wuille)
Pull request description:
This patch removes the need for the intermediary Base58 type `CBitcoinAddress`, by providing {`Encode`,`Decode`,`IsValid`}`Destination` functions that directly operate on the conversion between `std::string`s and `CTxDestination`.
As a side, it also fixes a number of indentation issues, and removes probably several unnecessary implicit `CTxDestination`<->`CBitcoinAddress` conversions.
This change is far from complete. In follow-ups I'd like to:
* Split off the specific address and key encoding logic from base58.h, and move it to a address.h or so.
* Replace `CTxDestination` with a non-`boost::variant` version (which can be more efficient as `boost::variant` allocates everything on the heap, and remove the need for `boost::get<...>` and `IsValidDestination` calls everywhere).
* Do the same for `CBitcoinSecret`, `CBitcoinExtKey`, and `CBitcoinExtPubKey`.
However, I've tried to keep this patch to be minimally invasive, but still enough to support non-Base58 addresses. Perhaps a smaller patch is possible to hack Bech32 support into `CBitcoinAddress`, but I would consider that a move in the wrong direction.
Tree-SHA512: c2c77ffb57caeadf2429b1c2562ce60e8c7be8aa9f8e51b591f354b6b441162625b2efe14c023a1ae485cf2ed417263afa35c892891dfaa7844e7fbabccab85e
This patch removes the need for the intermediary Base58 type
CBitcoinAddress, by providing {Encode,Decode,IsValid}Destination
function that directly operate on the conversion between strings
and CTxDestination.
617c459c6 qa: rpc test for wtxid in mempool entry (Suhas Daftuar)
7e5d5965d RPC: add wtxid to mempool entry output (Suhas Daftuar)
Pull request description:
We already cache this information in the mempool, so including it in the output of rpc calls is basically free.
Tree-SHA512: 2757e1bfca028103937e4b76ce1a5d805846bad5d3d9dd631dcc5f87721bcc0e9d19e437e02053ef1dd3b38b503f0fca8c0b8492cac37dfbd70256a3665f704c
37495e0d8 Reorder C{,Mutable}Transaction for better packing (Jeremy Rubin)
Pull request description:
These commits revise the layout of a few key classes to eliminate padding, eliminating useless memory overhead.
-This reduces CTransaction from 96 bytes to 88 bytes
Tree-SHA512: 91d1fec363edebbb1f1a5b98142c767511e99d3be857148a76e31cc512c9ab3d153083fa6b46b6407974d3b88de984b436c33e8606fbb2b273d74c825195aa17
dea086f49 Stop test_bitcoin-qt touching ~/.bitcoin (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11192
The directory remains unused, but this stops the tests touching ~/.bitcoin at all (namely creating it if it doesn't exist)
Tree-SHA512: e59ad6b83dbc5ea2fb2761994c09933721d29668b0eef09b9d938a4ee1c67871c5125c57483ee0ea25f2385e308d275d86bcb9087dd4d502923013b4f3dbac82
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
`make` rebuilds the entire project. This is quite slow if e.g. you're making changes to one file and only wish to run the bitcoind tests.
This commit adds an instruction to run `make -C src/test` (as opposed to `make src/test` and `make src/test/test_bitcoin`).
352d582ba Add vConnect to CConnman::Options (Marko Bencun)
Pull request description:
Split the "-connect" argument parsing out of CConnman and put it into
AppInitMain().
Tree-SHA512: f2d3efc4e2c5808ff98696ea20dd96df599bc472ed5afc9c3eea305d94c36a6ab50c632aa05396c7c34d1917d91b1e7ccd725656ff2631e2a36d9eac477455dc
ce3baa193 changed regtest RPCport to 18443 to avoid conflict with testnet 18332 (Ferdinando M. Ametrano)
Pull request description:
using the same JSON-RPC default port for both testnet and regtest prevents running both at the same time on the same machine. Since RPCport=P2Pport-1 for both mainnet and testnet, and regtest P2Pport being 18444, 18443 is proposed for regtest RPCport
Documentation has been updated (or created where missing); manpages doc/man/bitcoin*.1 could include information for regtest too
Tree-SHA512: d42185f7ef54dc918ece19b543c8681d08bb9c5a971394e21f2d9a1091734b091b08df69fab622c207b46f402cf9323ded5b7a33fbd0af722388930169124e7f
a1ea1cfbd qt: Use IsMine to validate custom change address (Chris Moore)
Pull request description:
Fixes#11137Closes#11184 (which was accidentally opened against 0.15 branch)
Tree-SHA512: a20a59b4f36c1471a9c84bcc7c69048576d1f413104c299a7ed9ba221f28eddf93d727fca2926420ea5d0dd9aba582924f26a5acd44d995039b7202c73eb53bc
47ba2c312 Fix currency/fee-rate unit string in the help text (Akio Nakamura)
Pull request description:
1. The RPC help text should use the constant `CURRENCY_UNIT` defined in `policy/feerate.cpp` instead of the literal `'BTC'`.
In the following 2 RPC commands, `'BTC'` is written directly in the help text.
This commit changes them to use that constant.
1) `estimatesmartfee`
2) `estimaterawfee`
2. Some RPC command use `'satoshis'` as the unit.
It should be written as `'satoshis'` instead of `'Satoshis'` in the RPC help text.
So, this commit fixes this typo in `getblocktemplate`.
Tree-SHA512: d0bd1cd90560e59bf456b076b958a2a1c998f85a7e65aeb6b2abcaba18919a3ae62f7c3909210461084c1a3275a35b6ba3ea3ec8f5cce33702ffe383c9e84bce
d1138e362 Remove redundant testutil files (MeshCollider)
Pull request description:
The only function in testutil.cpp, `GetTempPath()` simply called `fs::temp_directory_path()` directly. This just tidies things up by removing that redundant function and the file containing it
I can understand wanting a general util file for tests to use, but if there's nothing in it, we might as well remove it, it can always be added back later when it's put to use.
Tree-SHA512: b923f99acf33328743755368a1aa90f5da4a7d5f61b163a4b0b894275c98db80a91edf8f051fbfb4893d970fda5a9078aae78a2672867ff521c4ca4b653c71c0
5abb93f0e Fix include path for bitcoin-config.h in crypto/common.h (danra)
Pull request description:
All the other files in the repo which include bitcoin-config.h do so with the appropriate subfolder prefixed: config/bitcoin-config.h
The header should be included with the appropriate subfolder here as well.
Tree-SHA512: abda23a9cf251553f90afe0ee1866de46ed579471f4139737239a4f9334ca817d985deac6336740898718775d1264c0b80cb348668b10a9cae970895f2de37b8
5ac072caa Fix boost headers included as user instead of system headers (Dan Raviv)
Pull request description:
In most of the project, boost headers are included as system headers.
Fix the few inconsistent places where they aren't.
Tree-SHA512: 280af33a7bdc9d68a15b729fa88e1e7627e20a054b8d52a12cc5350c1ac9e9c90fb09f0aa97a00960969f75bcf3403dc52b834c94448b814efa63bfaf3b82663
538cc0ca8 build: Mention use of asm in summary (Wladimir J. van der Laan)
ce5381e7f build: Rename --enable-experimental-asm to --enable-asm and enable by default (Wladimir J. van der Laan)
Pull request description:
Now that 0.15 is branched off, enable assembler SHA256 optimizations by default, but still allow disabling them, for example if something goes wrong with auto-detection on a platform.
Also add mention of the use of asm in the configure summary.
Tree-SHA512: cd20c497f65edd6b1e8b2cc3dfe82be11fcf4777543c830ccdec6c10f25eab4576b0f2953f3957736d7e04deaa4efca777aa84b12bb1cecb40c258e86c120ec8
ec6902d0e rpc: Push down safe mode checks (Andrew Chow)
Pull request description:
This contains most of the changes of #10563 "remove safe mode" by @achow101, but doesn't remove the safe mode yet, but put an `ObserveSafeMode()` check in (all 23) individual calls which used to have okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables, which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
Tree-SHA512: eee0f251fe2f38f122e7391e3c4e98d6a1e2757f3b718d6b560ad835ae94f11490865a0aef893e90b5fe298165932c8dd8298224173ac2677a5245cd532bac6e
1. The RPC help text should use the constant CURRENCY_UNIT defined in
policy/feerate.cpp instead of the literal 'BTC'. In the following
2 RPC commands, 'BTC' is written directly in the help text.
1) estimatesmartfee
2) estimaterawfee
And also, for these help strings, the notation
'fee-per-kilobyte (in BTC)' is somewhat ambiguous.
To write more precisely, this commit changes to 'fee rate in BTC/kB'
with using the constant CURRENCY_UNIT.
2. Some RPC command use 'satoshis' as the unit. It should be written
as 'satoshis' instead of 'Satoshis' in the RPC help text.
So, this commit fixes this typo in getblocktemplate.
3. The phrase that '... feerate (BTC per KB) ...' is used to explain
the fee rate in the help text of following 2 RPC commands.
1) getmempoolinfo
2) fundrawtransaction
But they are different from other similar help text of the RPCs.
And also, 'KB' implies Kibibyte (2^10 byte).
To unify and to clarify, this commit changes these phrase to
'... fee rate in BTC/kB ...'.
(BTC references the constant 'CURRENCY_UNIT')
1bcd44223 Remove the virtual specifier for functions with the override specifier (practicalswift)
Pull request description:
Remove the `virtual` specifier for functions with the `override` specifier.
`override` implies that the function is virtual (in addition - of course - to guaranteeing that the function is overriding a virtual function from a base class).
Tree-SHA512: 2e83e1b3651f55f8f2645282114ab087ad3a0be8826f26ee5c2064d0952f677290b97261398c1d524ec7f87bbbfdbeefc141180f6099c8bbfa4c59a14f7fa755
On startup, the wallets will start pumping wallet transactions into the mempool in a different thread while LoadMempool() is running.
This will sometimes result in transactions "failing" to be accepted into mempool, but only for the reason that they were already
put there by a wallet. The log message for mempool load would note this as a 'failure' to import, which was misleading; it should
instead mark it as the transaction already being in the mempool.
Replace witness-stripped wallet transactions with full transactions;
this can happen when upgrading from a pre-segwit wallet to a segwit-
aware wallet.
All the other files in the repo which include bitcoin-config.h do so with the appropriate subfolder prefixed: config/bitcoin-config.h
The header should be included with the appropriate subfolder here as well.
This canonicalization also allows getting rid of a bit of extra configuration in Makefile.am.
This contains most of the changes of 10563 "remove safe mode", but doesn't
remove the safe mode yet, but put an `ObserveSafeMode()` check in
individual calls with okSafeMode=false.
This cleans up the ugly "okSafeMode" flag from the dispatch tables,
which is not a concern for the RPC server.
Extra-author: Wladimir J. van der Laan <laanwj@gmail.com>
6d2d2eb49 RPC: gettxout: Slightly improve doc and tests (Jorge Timón)
Pull request description:
Slightly related to https://github.com/bitcoin/bitcoin/pull/10822 in the sense that I felt the documentation and testing wasn't as good as it could be while writing it.
Ping @sipa since we discussed this on IRC.
Tree-SHA512: a0b3ffdac65245a0429e772fc2d8bcc1e829b02c70fb2af6ee0b7578cae46683f6c51a824b4d703d4dc3f99b6f03a658d6bbc818bf32981516f24124249a211d
eefc2f3 Move local include to before system includes (danra)
Pull request description:
Prevents accidental missing includes and hidden dependencies in the local file.
Tree-SHA512: 466b9dd53c596980fdbcccf1dfd8f34eb7ec5b32323ccb635e5705efcedc81af8fbe155ac57b9a2fc5c1f516489e940d1762b3508ded1fb54e187219bb9f75e6
a473eff [bench] Replace 0.00(000)1 with MICRO/MILLI #defines in validation.cpp. (Karl-Johan Alm)
5f850b0 [bench] Include ms/blk stats in Connect* benchmarks. (Karl-Johan Alm)
Pull request description:
Display the average per block runtime for the various benchmarked times in the block connect functions to give an overview of long(er) term time distribution statistics.
Tree-SHA512: 3d6f24f6b9e3dbb448a647e2cda8e7b90ad6a16d4821f49f426a8e1ebc3ce5a0cf0a8cde82213e293affba441615702dfe50822c8c818e282af03bfe383d83e0
de9a1db Acquire cs_main lock before cs_wallet during wallet initialization (Russell Yanofsky)
Pull request description:
`CWallet::MarkConflicted` may acquire the `cs_main` lock after `CWalletDB::LoadWallet` acquires the `cs_wallet` lock during wallet initialization. (`CWalletDB::LoadWallet` calls `ReadKeyValue` which calls `CWallet::LoadToWallet` which calls `CWallet::MarkConflicted`). This is the opposite order that `cs_main` and `cs_wallet` locks are acquired in the rest of the code, and so leads to `POTENTIAL DEADLOCK DETECTED` errors if bitcoin is built with `-DDEBUG_LOCKORDER`.
This commit changes `CWallet::LoadWallet` (which calls `CWalletDB::LoadWallet`) to acquire both locks in the standard order.
Error was reported by @luke-jr in https://botbot.me/freenode/bitcoin-core-dev/msg/90244330/
Tree-SHA512: 353fe21bc0a4a2828b41876897001a3c414d4b115ee7430925bd391d8bc396fca81661145d00996c1ba1a01516d9acf8b89fb5c3da27092f5f3aa7e37ef26ffa
6af49dd Output a bit more information for fee calculation report. (Alex Morcos)
a54c7b9 Fix rounding errors in calculation of minimum change size (Alex Morcos)
Pull request description:
Thanks to @juscamarena for reporting this.
Please backport to 0.15.
There was a potential rounding error where the fee for the change added to the fee for the original tx could be less than the fee for the tx including change.
This is fixed in the first commit. The second commit adds one more snippet of information in the fee calculation report. I actually realized that there is more information that would be nice to report, but we can add that post 0.15.
An open question is whether we should be returning failure if the test in line 2885 is hit or just resetting pick_new_inputs and continuing. Originally I made it a failure to avoid any possible infinite loops. But the case hit here is an example of where that logic possibly backfired.
Tree-SHA512: efe049781acc1f6a8ad429a689359ac6f7b7c44cdfc9578a866dff4a2f6596e8de474a89d25c704f31ef4f8c89af770e98b75ef06c25419d5a6dfc87247bf274
b426e24 Remove redundant explicitly defined copy ctors (Dan Raviv)
Pull request description:
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
Tree-SHA512: c9294ebf5d955d230b44c6f0d20822975d44a34471a717d656f8b17181bcd2827f47ba897edf5accd650f5998c58aadc8ab3c91a3f556f1f6de36830ed4069ce
e40fa98 Simplify bswap_16 implementation (danra)
Pull request description:
Simplify bswap_16 implementation on platforms which don't already have it defined.
This has no effect on the generated assembly; it just simplifies the source code.
Tree-SHA512: 1c6ac1d187a2751da75256d12b6b890160d15246dd2c2b6a56748ec43482e3a5a3323be2910f07b42d3dc243a568c7412c26eaa036efec764436e988abd1c3f1
82dd719 rpc: Write authcookie atomically (Wladimir J. van der Laan)
Pull request description:
Use POSIX rename atomicity at the `bitcoind` side to create a working
cookie atomically:
- Write `.cookie.tmp`, close file
- Rename `.cookie.tmp` to `.cookie`
This avoids clients reading invalid/partial cookies as in #11129. As such, this is an alternative to that PR.
Tree-SHA512: 47fcc1ed2ff3d8fed4b7441e4939f29cc99b57b7a035673c3b55a124a2e49c8a904637a6ff700dd13a184be8c0255707d74781f8e626314916418954e2467e03
e254830 Make tabs toolbar no longer have a context menu (Andrew Chow)
Pull request description:
Adds a contextMenuPolicy of Qt::PreventContextMenu to prevent the tabs toolbar from showing a context menu that allows it to be hidden.
Fixes#11168
Tree-SHA512: 8900b3c1a891ead3c9a20dc365b436fa75f97dbe0dfa7e20ee26fd9d09f3fee6eda286b0c075ed89fe1361608ecbdd87c744e37d97a3fba62493a86dedda867b
CFeeRate and CTxMemPoolEntry have explicitly defined copy ctors which has the same functionality as the implicit default copy ctors which would have been generated otherwise.
Besides being redundant, it violates the rule of three (see https://en.wikipedia.org/wiki/Rule_of_three_(C%2B%2B_programming) ).
(Of course, the rule of three doesn't -really- cause a resource management issue here, but the reason for that is exactly that there is no need for an explicit copy ctor in the first place since no resources are being managed).
CFeeRate has an explicitly defined copy ctor which has the same functionality as the implicit default copy ctor which would h
ave been generated otherwise.
946638d0a Improve versionbits_computeblockversion test code consistency (danra)
Pull request description:
In this test, `nTime` is used for all the calls to `Mine()`, each time being set to the correct time beforehand, except for in the last few calls to `Mine()` where `nStartTime` is used directly, even though `nTime` is still set to `nStartTime` beforehand. `nTime` just remains unused for these last few calls to `Mine()`.
Changed the last few calls to `Mine()` to use `nTime` instead, improving consistency. This also fixes an unused value static analyzer warning about `nTime` being set to a value which is never used.
Tree-SHA512: f17cf1d29fd7097d53c0135d6357ee50943bd81b5ce0be785a37b85d34b5127cd6cc17ef844b519e19c33f2d96f7ababee643b9fba7afb031f444b2cfaeedbfd
In this test, `nTime` is used for all the calls to `Mine()`, each time being set to the correct time beforehand, except for in the last few calls to `Mine()` where `nStartTime` is used directly, even though `nTime` is still set to `nStartTime` beforehand. `nTime` just remains unused for these last few calls to `Mine()`.
Changed the last few calls to `Mine()` to use `nTime` instead, improving consistency. This also fixes an unused value static analyzer warning about `nTime` being set to a value which is never used.
bc70ab5 Fix header guards using reserved identifiers (Dan Raviv)
Pull request description:
Identifiers beginning with an underscore followed immediately by an uppercase letter are reserved.
Tree-SHA512: 32b45e0aef6f6325bc3cbdea399532437490b753621149374df27e1c1eed6739ad1a09ae368e888cab8d01fb757f1b190c45a0854d2861de39a9296f17e29d9e
f01103c MOVEONLY: Init functions wallet/wallet.cpp -> wallet/init.cpp (Russell Yanofsky)
e7fe320 MOVEONLY: Fee functions wallet/wallet.cpp -> wallet/fees.cpp (Russell Yanofsky)
d97fe20 Move some static functions out of wallet.h/cpp (Russell Yanofsky)
Pull request description:
This just moves some static wallet fee and init functions out of `wallet/wallet.cpp` and into new `wallet/fees.cpp` and `wallet/init.cpp` source files. There is one commit updating declarations and callers, followed by two MOVEONLY commits actually moving the function bodies.
This change is desirable because wallet.h/cpp are monolithic and hard to navigate, so pulling things out and grouping together pieces of related functionality should improve the organization.
Another motivation is the wallet process separation work in https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially) parameter parsing and fee estimation are still done in the main process rather than the wallet process, and having functions that run in different processes scrambled up throughout wallet.cpp is unnecessarily confusing.
Tree-SHA512: 6e6982ff82b2ab4e681c043907e2b1801ceb9513394730070f16c46ad338278a863f5b3759aa13db76a259b268b1c919c81f4e339f0796a3cfb990161e8c316d
Simplify bswap_16 implementation on platforms which don't already have it defined.
This has no effect on the generated assembly; it just simplifies the source code.
Use POSIX rename atomicity at the `bitcoind` side to create a working
cookie atomically:
- Write `.cookie.tmp`, close file
- Rename `.cookie.tmp` to `.cookie`
This avoids clients reading invalid/partial cookies as in #11129.
1. Calculate nblocks more adaptive.
If not specify nblocks-parameter, illegal parameter error
will happen when target block height is below blocks for 1 month.
To avoid this error, set default nblocks to
min(blocks for 1 month, target block's height - 1)
And allowing 0 so that this RPC works good even if target block is
genesis block or 1st block.
2. Correct error message.
nblocks accepts [0 .. block's height -1] . so fix as following:
"Invalid block count: should be between 0 and the block's height - 1"
3. Add check 0-divide.
If nTimeDiff = 0 then returns {... "txrate":} and
bitcoin-cli cannot handle the response.
To avoid this error, do not return "txrate" if nTimeDiff = 0.
4. Add following 3 elements to the return object.
1) 'window_block_count' : Size of the window in number of blocks.
2) 'window_tx_count' : The number of transactions in the window.
3) 'window_interval' : The elapsed time in the window.
They clarify how 'txrate' is calculated. 2) and 3) are returned
only if 'window_block_count' is a positive value.
5. Improve help text for 'time' as following.
'The timestamp for the final block in the window in UNIX format.
f1708ef89 Add recommendation: By default, declare single-argument constructors `explicit` (practicalswift)
Pull request description:
This is a follow-up to the now merged #10969.
Add recommendation:
> By default, declare single-argument constructors `explicit`.
>
> - *Rationale*: This is a precaution to avoid unintended conversions that might arise when single-argument constructors are used as implicit conversion functions.
>
Tree-SHA512: 1ceb1008a7863ebd0f09ba9c06b4e28b3b03265d7381f9d0c8bd4be1663d5d0392de0ecd811027aa27c0d962723674b245b3c165a437942a776f3525db39d36b
cd0ea4874 Changing -txindex requires -reindex, not -reindex-chainstate (Matt Corallo)
Pull request description:
If there's an 0.15.0rc3, this should go in it.
Tree-SHA512: 857e77f0af9c055a3d1d91f37474ee9e06d6bc8c5ed21b29201b6c386801e7041523949076cdf0daa4d357a5175ce49394d85a1bedfbf13f3e577bdb6da1d6ce
CWallet::MarkConflicted may acquire the cs_main lock after
CWalletDB::LoadWallet acquires the cs_wallet lock during wallet initialization.
(CWalletDB::LoadWallet calls ReadKeyValue which calls CWallet::LoadToWallet
which calls CWallet::MarkConflicted). This is the opposite order that cs_main
and cs_wallet locks are acquired in the rest of the code, and so leads to
POTENTIAL DEADLOCK DETECTED errors if bitcoin is built with -DDEBUG_LOCKORDER.
This commit changes CWallet::LoadWallet (which calls CWalletDB::LoadWallet) to
acquire both locks in the standard order. It also fixes some tests that were
acquiring wallet and main locks out of order and failed with the new locking in
CWallet::LoadWallet.
Error was reported by Luke Dashjr <luke-jr@utopios.org> in
https://botbot.me/freenode/bitcoin-core-dev/msg/90244330/
ecb11f5 Document the non-strict-DER-conformance of one test in tx_valid.json. (Andreas Schildbach)
Tree-SHA512: 4d5ba4645fbfe8fe3f1baaa5f1a1152cdd2cbf3d901f38d8e7fbd56b16caa6a8a17f2a48c74fb725ce454dd1c870b81b2238e89d0639fcd4eee858554726e996
In a signature, it contains an ASN1 integer which isn't strict-DER conformant due to excessive 0xff padding:
0xffda47bfc776bcd269da4832626ac332adfca6dd835e8ecd83cd1ebe7d709b0e
a897d0e tests: Remove OldSetKeyFromPassphrase/OldEncrypt/OldDecrypt (practicalswift)
Pull request description:
Reduces the number of non-free:d allocs with four (Δ in use at exit = -928 bytes).
With this patch applied:
```
$ valgrind --leak-check=full --show-leak-kinds=all src/test/test_bitcoin --log_level=test_suite --run_test=wallet_crypto
…
==20243== HEAP SUMMARY:
==20243== in use at exit: 72,704 bytes in 1 blocks
==20243== total heap usage: 53,138 allocs, 53,137 frees, 49,600,420 bytes allocated
==20243==
==20243== 72,704 bytes in 1 blocks are still reachable in loss record 1 of 1
==20243== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==20243== by 0x6AA5EFF: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==20243== by 0x40106B9: call_init.part.0 (dl-init.c:72)
==20243== by 0x40107CA: call_init (dl-init.c:30)
==20243== by 0x40107CA: _dl_init (dl-init.c:120)
==20243== by 0x4000C69: ??? (in /lib/x86_64-linux-gnu/ld-2.23.so)
==20243== by 0x2: ???
==20243== by 0xFFF0006A2: ???
==20243== by 0xFFF0006B8: ???
==20243== by 0xFFF0006CF: ???
==20243==
==20243== LEAK SUMMARY:
==20243== definitely lost: 0 bytes in 0 blocks
==20243== indirectly lost: 0 bytes in 0 blocks
==20243== possibly lost: 0 bytes in 0 blocks
==20243== still reachable: 72,704 bytes in 1 blocks
==20243== suppressed: 0 bytes in 0 blocks
```
Without this patch applied:
```
$ valgrind --leak-check=full --show-leak-kinds=all src/test/test_bitcoin --log_level=test_suite --run_test=wallet_crypto
…
==19023== HEAP SUMMARY:
==19023== in use at exit: 73,632 bytes in 5 blocks
==19023== total heap usage: 52,718 allocs, 52,713 frees, 49,502,962 bytes allocated
==19023==
==19023== 24 bytes in 1 blocks are still reachable in loss record 1 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E5665: lh_insert (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7BB3: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023== by 0x182596: invoke<void (*)()> (callback.hpp:56)
==19023== by 0x182596: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
==19023==
==19023== 128 bytes in 1 blocks are still reachable in loss record 2 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E5331: lh_new (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7862: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7B7F: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023==
==19023== 176 bytes in 1 blocks are still reachable in loss record 3 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E530F: lh_new (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7862: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E7B7F: ??? (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E87AD: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023==
==19023== 600 bytes in 1 blocks are still reachable in loss record 4 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x642DE77: CRYPTO_malloc (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E8745: ERR_get_state (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64E883D: ERR_put_error (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x64EAAE4: EVP_DecryptFinal_ex (in /lib/x86_64-linux-gnu/libcrypto.so.1.0.0)
==19023== by 0x3AD150: wallet_crypto::OldDecrypt(std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, secure_allocator<unsigned char> >&, unsigned char const*, unsigned char const*) (crypto_tests.cpp:81)
==19023== by 0x3AF892: wallet_crypto::TestCrypter::TestDecrypt(CCrypter const&, std::vector<unsigned char, std::allocator<unsigned char> > const&, std::vector<unsigned char, std::allocator<unsigned char> > const&) (crypto_tests.cpp:137)
==19023== by 0x3AD5E9: wallet_crypto::decrypt::test_method() (crypto_tests.cpp:223)
==19023== by 0x3ADC11: wallet_crypto::decrypt_invoker() (crypto_tests.cpp:216)
==19023== by 0x182596: invoke<void (*)()> (callback.hpp:56)
==19023== by 0x182596: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
==19023== by 0x596CCB0: ??? (in /usr/lib/x86_64-linux-gnu/libboost_unit_test_framework.so.1.58.0)
==19023== by 0x594C995: boost::execution_monitor::catch_signals(boost::unit_test::callback0<int> const&) (in /usr/lib/x86_64-linux-gnu/libboost_unit_test_framework.so.1.58.0)
==19023==
==19023== 72,704 bytes in 1 blocks are still reachable in loss record 5 of 5
==19023== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19023== by 0x6AA5EFF: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==19023== by 0x40106B9: call_init.part.0 (dl-init.c:72)
==19023== by 0x40107CA: call_init (dl-init.c:30)
==19023== by 0x40107CA: _dl_init (dl-init.c:120)
==19023== by 0x4000C69: ??? (in /lib/x86_64-linux-gnu/ld-2.23.so)
==19023== by 0x2: ???
==19023== by 0xFFF0006A2: ???
==19023== by 0xFFF0006B8: ???
==19023== by 0xFFF0006CF: ???
==19023==
==19023== LEAK SUMMARY:
==19023== definitely lost: 0 bytes in 0 blocks
==19023== indirectly lost: 0 bytes in 0 blocks
==19023== possibly lost: 0 bytes in 0 blocks
==19023== still reachable: 73,632 bytes in 5 blocks
==19023== suppressed: 0 bytes in 0 blocks
==19023==
==19023== For counts of detected and suppressed errors, rerun with: -v
==19023== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
```
Tree-SHA512: 38b6552736a5710a42dbad770c490583cfc762acbec716f5db4cf38314f494ea99430713ea407c73b49d867676ced221a282437f3fcfd8346f8f68386f4fc74d
b82c55a Add attribute [[noreturn]] (C++11) to functions that will not return (practicalswift)
Pull request description:
Add attribute `[[noreturn]]` (C++11) to functions that will not return.
Rationale:
* Reduce the number of false positives/false negatives from static analyzers with regards to things such as unused or unreachable code
* Potentially enable additional compiler optimizations
Tree-SHA512: 899683fe8b2fcf19bd334352271d368b46b805be9d426aac1808335fd95732d6d7078d3296951b9879196f3f6e3ec0fdb7695d0afdc3fbe4dd78a2ca70e91ff7
360b464 Comments: More comments on functions/globals in standard.h. (Jim Posen)
Pull request description:
I was confused about what "data carrier" meant, so I wanted to comment the `fAcceptDatacarrier` and `nMaxDatacarrierBytes` fields specifically. Then I figured I'd add docs for the rest of the functions.
Tree-SHA512: e6d0cfe6f4a2ab52ae76f984b1f5d8de371ae938e7832be8b02517d868f1caea62fec8888c917a2bd3d8ef74025de7f00dc96923fa56436dc6b190626652bf29
745d2e3 Clean up getbalance RPC parameter handling (Russell Yanofsky)
fd5d71e Update developer notes after params.size() cleanup (Russell Yanofsky)
e067673 Avoid treating null RPC arguments different from missing arguments (Russell Yanofsky)
e666efc Get rid of redundant RPC params.size() checks (Russell Yanofsky)
Pull request description:
This is a followup to #10783.
- The first commit doesn't change behavior at all, just simplifies code.
- The second commit just changes RPC methods to treat null arguments the same as missing arguments instead of throwing type errors.
- The third commit updates developer notes after the cleanup.
- The forth commit does some additional code cleanup in `getbalance`.
Followup changes that should happen in future PRs:
- [ ] Replace uses of `.isTrue()` with calls to `.get_bool()` so numbers, objects, and strings cause type errors instead of being interpreted as false. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133850525
- [ ] Add braces around if statements. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133851133
- [ ] Maybe improve UniValue type error exceptions and eliminate RPCTypeCheck and RPCTypeCheckArgument functions. https://github.com/bitcoin/bitcoin/pull/11050#discussion_r133829303
Tree-SHA512: e72f696011d20acc0778e996659e41f9426bffce387b29ff63bf59ad1163d5146761e4445b2b9b9e069a80596a57c7f4402b75a15d5d20f69f775ae558cf67e9
4aa2508 Bugfix: Use testnet RequireStandard for -acceptnonstdtxn default (Luke Dashjr)
Pull request description:
Fixes a bug introduced in #8855
`-acceptnonstdtxn` is a valid option only for testnet/regtest (in Core), and the help message reflects that. Currently, however, it is buggy in two ways:
1. It uses mainnet to get the default value, which doesn't make sense since the option is never available for mainnet, and the only time the option is available, is when the default is the opposite.
2. It uses the value of "require standard" directly as the default for "accept non-standard transactions", but these concepts are opposites: a negation must be performed to transform one to the other.
Note the combination of these bugs results in the correct boolean output, but the logic to get there is completely wrong.
Tree-SHA512: 06ce513f59ba31f7ab4b6422a08a17bb37a5652dea4c38a4bbefedd5e2752d17bfccc32a4b0508068fa4783e316bff00a821ef18a24b1a2bb02859995d188fdc
40a0f9f Enable devirtualization opportunities by using the final specifier (C++11) (practicalswift)
9a1675e optim: mark a few classes final (Cory Fields)
Pull request description:
Using gcc's ```-Wsuggest-final-types``` and lto, I identified a few easy devirtualization wins:
> wallet/wallet.h:651:7: warning: Declaring type 'struct CWallet' final would enable devirtualization of 26 calls [-Wsuggest-final-types]
>coins.h:201:7: warning: Declaring type 'struct CCoinsViewCache' final would enable devirtualization of 13 calls [-Wsuggest-final-types]
>txdb.h:67:7: warning: Declaring type 'struct CCoinsViewDB' final would enable devirtualization of 5 calls [-Wsuggest-final-types]
>zmq/zmqnotificationinterface.h:16:7: warning: Declaring type 'struct CZMQNotificationInterface' final would enable devirtualization of 4 calls [-Wsuggest-final-types]
>httpserver.cpp:42:7: warning: Declaring type 'struct HTTPWorkItem' final would enable devirtualization of 2 calls [-Wsuggest-final-types]
Tree-SHA512: 2a825fd27121ccabaacff5cde2fc8a50d1b4cc846374606caa2a71b0cd8fcb0d3c9b5b3fd342d944998610e2168048601278f8a3709cc515191a0bb2d98ba782
6bbdafc Pass serialization flags and whether to include hex to TxToUniv (Andrew Chow)
e029c6e Only return hex field once in getrawtransaction (Andrew Chow)
Pull request description:
The hex is already returned in `TxToUniv()`, no need to give it out a second time in getrawtransaction itself.
Tree-SHA512: 270289f2d6dea37f51f5a42db3dae5debdbe83c6b504fccfd3391588da986ed474592c6655d522dc51022d4b08fa90ed1ebb249afe036309f95adfe3652cb262
Instead of passing a StartShutdown reference all the way up from
txdb, give ShowProgress a "resumeable" boolean, which is used to
inform the user if the action will be resumed, but cancel is always
allowed by just calling StartShutdown().
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
67ceff4 [wallet] Add logging to MarkReserveKeysAsUsed (John Newbery)
1221f60 [wallet] Remove keypool_topup_cleanups (John Newbery)
Pull request description:
A couple of minor cleanups suggested by @ryanofsky here: https://github.com/bitcoin/bitcoin/pull/11022#pullrequestreview-55598940
Does not affect functionality. Not required for v0.15.
Tree-SHA512: d8d0698fd26ea49a4157e68669d5511095760c3a1ecfa3f917e3f273efbafb55c51a202d677614216eae3f796b6e8d17506b2ec2d4799a94f18981b396e65eec
8f2f1e0 wallet: Avoid second mapWallet lookup (João Barbosa)
Pull request description:
All calls to `mapWallet.count()` have the intent to detect if a `txid` exists and most are followed by a second lookup to retrieve the `CWalletTx`.
This PR replaces all `mapWallet.count()` calls with `mapWallet.find()` to avoid the second lookup.
Tree-SHA512: 96b7de7f5520ebf789a1aec1949a4e9c74e13683869cee012f717e5be8e51097d068e2347a36e89097c9a89f1ed1a1529db71760dac9b572e36a3e9ac1155f29
bea8e9e Document the preference of nullptr over NULL or (void*)0 (practicalswift)
Pull request description:
Document the preference of `nullptr` over `NULL` or `(void*)0`.
After this commit:
```
$ git grep "[^A-Za-z_]NULL[^A-Za-z_]" | grep -vE '(leveldb|univalue|secp256k1|torcontrol|NULL certificates|ctaes|release-notes|patches|configure.ac|developer-notes)'
$
```
Some context:
* `NULL → nullptr` was handled in the recently merged PR #10483
* `0 → nullptr` was handled in the recently merged PR #10645
Tree-SHA512: f863096aa4eb21705910f89713ca9cc0d83c6df2147e3d3530c3e1589b96f6c68de8755dcf37d8ce99ebda3cfb69805e00eab13bf65424aaf16170e9dda3958a
07685d1 Add length check for CExtKey deserialization (Jonas Schnelli)
Pull request description:
Fix a potential overwrite or uninitialised data issue.
That code part is currently unused (at least in Bitcoin Core).
We already do the same check `CExtPubKey`.
Reported by @guidovranken
Tree-SHA512: 069ac5335248cf890491bc019537d3b0f7481428a4b240c5cd28ee89b56f4c9f45d947dd626fe89b2fae58472b6dbef57ed909876efe9963e2d72380d17cff12
f9ca0fe Fix combinerawtransaction RPC help result section (Jonas Nick)
Pull request description:
Without this PR it looks like the RPC would return something like a dictionary. But it just returns the transaction in hex.
Tree-SHA512: 565571fbb60cb805f81198cf0eab9ecdc04b62aff58c56145449235cd7c21215f4a1d7a5694d01c1a815fe0e787e5b790d24b71e2f9cc595cda16462ab680b8d
a622a1768 Fix constness of ArgsManager methods (João Barbosa)
Pull request description:
Make `cs_args` mutex mutable so that const methods can acquire it.
There's also tiny performance improvement by avoiding two map lookups when retrieving an argument value.
Tree-SHA512: ece58469745f2743b4b643242b51889a3d9c5b76492ed70bb74d4e5b378fff59da79fc129e499da779bf9f488c9435dda17ad1f3a804c1c30f56af422389e8bd
986255026 Use the noexcept specifier (C++11) instead of deprecated throw() (practicalswift)
Pull request description:
Use the `noexcept` specifier (C++11) instead of deprecated `throw()`.
Tree-SHA512: cf9b6b18f61f2f59bbeceb2e43b5cd07a60f5e569c8def05c410cb72326d597c80cb731059969ef89fa5fddaae1242225886e6109fcb535c4ad62d56ebcdf1ea
6e8c48dc5 Add const to methods that do not modify the object for which it is called (practicalswift)
Pull request description:
Tree-SHA512: a6888111ba16fb796e320e60806e1a77d36f545989b5405dc7319992291800109eab0b8e8c286b784778f41f1ff5289e7cb6b4afd7aec77f385fbcafc02cffc1
08f71c29e [Trivial] Add a comment on the use of prevector in script. (Gregory Maxwell)
Pull request description:
Tree-SHA512: 020981516e67e576685eb9a8532178fb97d1780af409fc86d869cd05c293c0c823c26e838cf544d18610f5a3f479ce3e47d2ccb95fb1c4e55fe9e7ceb354f20b
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
Removes vchDefaultKey which was only used for first run detection.
Improves wallet first run detection by checking to see if any keys
were read from the database.
This will now also check for a valid defaultkey for backwards
compatibility reasons and to check for any corruption.
Keys will stil be generated on the first one, but there won't be
any shown in the address book as was previously done.
Only change in behavior is that unsupported combinations of parameters now
trigger more specific error messages instead of the vague "JSON value is not a
string as expected" error.
03bc719a8 [wallet] Close DB on error. (Karl-Johan Alm)
Pull request description:
This PR intends to plug some leaks. It specifically implements adherence to the requirement in BDB to close a handle which failed to open (https://docs.oracle.com/cd/E17276_01/html/api_reference/C/dbopen.html):
> The `DB->open()` method returns a non-zero error value on failure and 0 on success. If `DB->open()` fails, the `DB->close()` method must be called to discard the DB handle.
Tree-SHA512: cc1f2b925ef3fd6de785f62108fbc79454443397f80707762acbc56757841d2c32b69c0234f87805571aa40c486da31f315ca4c607a2c7d1c97c82a01301e2a6
f4c3d2c Enable disablesafemode by default. (Gregory Maxwell)
Pull request description:
Safemode is almost useless as is-- it only triggers in limited
cases most of which aren't even concerning. There have been
several proposals to remove it. But as a simpler, safer, and
more flexible first case, simply deactivate it by default.
Anyone who wants it can re-enable and know what they've signed up for.
Tree-SHA512: f5409a3e81514c32db8eb27c7563ef85e25e56e5fc2a59eac2c30b10ec54087d982c1d3b702bedf9f3133c1f272f23805582a0f468350ba18d8b5a02bedd6401
This changes RPC methods to treat null arguments the same as missing arguments,
instead of throwing type errors. Specifically:
- `getbalance` method now returns the wallet balance when the `account` param
is null instead of throwing a type error (same as when parameter is missing).
It is still an error to supply `minconf` or `watchonly` options when the
account is null.
- `addnode` and `setban` methods now return help text instead of type errors if
`command` params are null (same as when params are missing).
- `sendrawtransaction`, `setaccount`, `movecmd`, `sendfrom`,
`addmultisigaddress`, `listaccounts`, `lockunspent` methods accept null
default values where missing values were previously allowed, and treat them
the same.
This commit just moves a few function declarations and updates callers.
Function bodies are moved in two followup MOVEONLY commits.
This change is desirable because wallet.h/cpp are monolithic and hard to
navigate, so pulling things out and grouping together pieces of related
functionality should improve the organization.
Another proximate motivation is the wallet process separation work in
https://github.com/bitcoin/bitcoin/pull/10973, where (at least initially)
parameter parsing and fee estimation are still done in the main process rather
than the wallet process, and having functions that run in different processes
scrambled up throughout wallet.cpp is unnecessarily confusing.
90d4d89 scripted-diff: Use the C++11 keyword nullptr to denote the pointer literal instead of the macro NULL (practicalswift)
Pull request description:
Since C++11 the macro `NULL` may be:
* an integer literal with value zero, or
* a prvalue of type `std::nullptr_t`
By using the C++11 keyword `nullptr` we are guaranteed a prvalue of type `std::nullptr_t`.
For a more thorough discussion, see "A name for the null pointer: nullptr" (Sutter &
Stroustrup), http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2431.pdf
With this patch applied there are no `NULL` macro usages left in the repo:
```
$ git grep NULL -- "*.cpp" "*.h" | egrep -v '(/univalue/|/secp256k1/|/leveldb/|_NULL|NULLDUMMY|torcontrol.*NULL|NULL cert)' | wc -l
0
```
The road towards `nullptr` (C++11) is split into two PRs:
* `NULL` → `nullptr` is handled in PR #10483 (scripted, this PR)
* `0` → `nullptr` is handled in PR #10645 (manual)
Tree-SHA512: 3c395d66f2ad724a8e6fed74b93634de8bfc0c0eafac94e64e5194c939499fefd6e68f047de3083ad0b4eff37df9a8a3a76349aa17d55eabbd8e0412f140a297
3f8fa7f Make sure to clean up mapBlockSource if we've already seen the block (Cory Fields)
Pull request description:
Otherwise we may leave them dangling.
Credit TheBlueMatt.
Tree-SHA512: 8be77e08ebfc4f5b206d5ee7cfbe87f92c1eb5bc2b412471993658fe210306789aaf0f3d1454c635508a7d8effede2cf5ac144d622b0157b872733d9661d65c3
85c82b5 Avoid masking of difficulty adjustment errors by checkpoints (Pieter Wuille)
Pull request description:
Currently difficulty adjustment violations are not reported for chains that branch off before the last checkpoint. Change this by moving the checkpoint check after the difficulty check.
Tree-SHA512: 33666f2c3459151b28c42041a463779e6df18f61d3dd5b1879a0af4e5b199ef74d1e33e06af68bebfdfb211569ad5fb56556bfebe9d63b5688d910ea211b839a
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
c5ebddd11 Tests: address placement should be deterministic by default (René Nyffenegger)
Pull request description:
Better version of wrong and closed pull request https://github.com/bitcoin/bitcoin/pull/10764
Tree-SHA512: dfda6ea4a9dd0f4c8b96212ad43a716ff1dddf115cd2712a2a7e42c97fc9494079c746906b39d880a9827c05d2b75c728afd4ca4519ce4d365f0dae0c4aec24c
Currently difficulty adjustment violations are not reported for
chains that branch off before the last checkpoint. Change this
by moving the checkpoint check after the difficulty check.
This commit adds basic keypool mark-used and topup:
- try to topup the keypool on initial load
- if a key in the keypool is used, mark all keys before that as used and
try to top up
4d4fb33fc Rename member field according to the style guide. (Pavel Janík)
Pull request description:
After #10193, approx. five instances of this warning are printed when compiling with `-Wshadow`:
```
In file included from txmempool.cpp:14:
./reverse_iterator.h:20:22: warning: declaration shadows a field of 'reverse_range<T>' [-Wshadow]
reverse_range(T &x) : x(x) {}
^
./reverse_iterator.h:17:8: note: previous declaration is here
T &x;
^
1 warning generated.
```
Tree-SHA512: 6c07c2ed6f4f232a3a8bdcdd6057040967c74552fd29d80f42e8a453b95baf203c410aa31dccc08ff2e765cbba02b1a282f6ea7804955f09b31ab20ef383792e
fd05132e5 Restore default format state of cout after printing with std::fixed/setprecision (practicalswift)
Pull request description:
Restore default format state of `std::cout` after printing with `std::fixed`/`std::setprecision`.
Tree-SHA512: 445b5b42aff58e2350939e8febc9b4a6fff478616abfe831aec42bee906cefac7a153c93d506407fb213d04dae9c7afbb5bfd344be63ca0f40ae39b331a4144f
Safemode is almost useless as is-- it only triggers in limited
cases most of which aren't even concerning. There have been
several proposals to remove it. But as a simpler, safer, and
more flexible first case, simply deactivate it by default.
Anyone who wants it can re-enable and know what they've signed up for.
861f9a2 Skip remainder of init if upgrade is cancelled (Matt Corallo)
Pull request description:
Based on #10919.
Without this, if you cancel upgrade, you get a needless error:
ERROR: VerifyDB(): *** irrecoverable inconsistency in block data at
Tree-SHA512: aa47665682c6605ada376f1c100ce17cf8c4312427929eb2e75306f2199b47cbcdb4e0d98d5efcfefff03947b2c0fcbd3aab487a4ed14d50607df685c91a03d0
055d95f [wallet] return correct error code from resendwallettransaction (John Newbery)
Pull request description:
New code in #10995 uses `RPC_INVALID_REQUEST`. According to the comment in rpc/protocol.h:
```
// RPC_INVALID_REQUEST is internally mapped to HTTP_BAD_REQUEST (400).
// It should not be used for application-layer errors.
```
Change the returned error code to `RPC_WALLET_ERROR`
#11000 will need to be updated to test for the correct error code.
Tree-SHA512: 0201b3a2091adf17ad301825da5bd29f0ea7e284b5394cbef80483fc293a558acc849f74a0780bb8501acab324fc722e41ae049cffec7afb76884e26df4b809e
ce07638 doc: Add comment to use ValueFromAmount/AmountFromValue for JSON, not utilmoneystr (Wladimir J. van der Laan)
ec05c50 rpc: Use ValueFromAmount instead of FormatMoney in TxToUniv (Wladimir J. van der Laan)
46347ad rpc: Move ValueFromAmount to core_write (Wladimir J. van der Laan)
dac3782 doc: Correct AmountFromValue/ValueFromAmount names (Wladimir J. van der Laan)
Pull request description:
With this, the amounts returned in `decoderawtransaction` will be padded to 8 digits like anywhere else in the API.
This is accomplished by using `ValueFromAmount` in `TxToUniv`, instead of `FormatMoney` which it currently (mistakingly) uses. The `FormatMoney` function is only for debugging/logging use!
To avoid dependency issues, `ValueFromAmount` is moved to `core_write.cpp`, where it also fits better. I don't move `AmountFromValue` to `core_read.cpp` at the same time, as this would have more impact due to the RPCError dependency there.
(n.b.: large number of changed files is solely due to the util_tests JSONs needing update)
Tree-SHA512: 10fc2d27d33a77dbcb57aa7eccd4f53110c05d38eb7df6d40f10f14c08fad4274472e93af75aa59fe68ad0720fdf0930f0108124abef518e0dd162b3d2b2b292
ee2d10a Check if sys/random.h is required for getentropy on OSX. (James Hilliard)
Pull request description:
This should check and include sys/random.h if required for osx as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9821#issuecomment-290936636).
Tree-SHA512: e9491f67f2e8b2e6bcdbcbb8063295e844d5627daf5336e3e17b4a8027d888fa65a08e4580a745abdc35ffd8d86b4fc7434daaac172c4a06ab7566a2ed0bfb92
This is necessary because core_write has to write amounts in
TxToUniv, and mistakingly uses FormatMoney for that
(which is only for debugging).
We don't move AmountFromValue at the same time, as
this is more challenging due to the RPCError depencency
there.
01699fb Fix resendwallettransactions assert failure if -walletbroadcast=0 (Matt Corallo)
Pull request description:
This fixes#10981 in my preferred way.
Tree-SHA512: 2e43d3ac78d13c5d59db23a82c76c722cc3344767a8237617080e489296d27a98bb1b3bd469b2c9b289b57a9da3709c90448d7a23bcc2e1dfb791c4fd16be015
e7539f8 Fix some broken init-time prints/constants (Matt Corallo)
13ab353 Check for empty coinsview instead of just-reset coinsview in init (Matt Corallo)
fce3f4f Fix resume-of-reindex-after-restart (Matt Corallo)
efac91e Always wait for threadGroup to exit in bitcoind shutdown (Matt Corallo)
Pull request description:
This is a follow-on to #10758 to help move 10758 along. The first fixes a regression in master that was partially fixed in 10758, the second I'm not sure if its a regression or not, but its clearly a bug that should be fixed.
Tree-SHA512: aca7b97a97dca66e1a218a33cc6f4aa002292ff1bb0af64e35b81fbaa91b9504f2605375808b43e93a63fc73634ad079b30ef6c9f4ba338d3b5f72d816dfeaff
1de73f4 Disconnect network service bits 6 and 8 until Aug 1, 2018 (Matt Corallo)
Pull request description:
Immediately disconnect peers that use service bits 6 and 8 until August 1st, 2018
These bits have been used as a flag to indicate that a node is running incompatible
consensus rules instead of changing the network magic, so we're stuck disconnecting
based on the service bits, at least for a while.
Staying connected to nodes on other networks only prevents both sides from reaching consensus quickly, wastes network resources on both sides, etc.
Didn't add constants to protocol.h as the code there notes that "service bits should be allocated via the BIP process".
Tree-SHA512: 2d887774fcf20357019ffc2a8398464c76c1cff2c4e448c92bd5f391d630312301977fea841e0534df6641c7c5547605a5aad82859c59c4bd68be865e6d5a4c6
1967d2a qt: Increase BLOCK_CHAIN_SIZE constants (Wladimir J. van der Laan)
Pull request description:
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added a bit extra to accomodate the near future (15GB for the chain and 1GB for the chainstate).
Tree-SHA512: 76ec7770bd3a30380b0224a0f307cdad14c8227ef726dd55738cebe9d894430865aff11e05a793fd3e60d8fe019dbb392f574c1fb63ec746618b4460ed64bd0c
11dd29b [net] Fix use of uninitialized value in getnetworkinfo(const JSONRPCRequest& request) (practicalswift)
Pull request description:
When running `test_bitcoin` under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable `nLocalServices` is triggered by `g_connman->GetLocalServices()` in `getnetworkinfo(const JSONRPCRequest& request)` (`net.cpp:462`):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized `nLocalServices` is that `CConnman::Start(...)` is not called
by the tests, and hence the initialization normally performed by `CConnman::Start(...)` is
not done.
This commit adds a method `Init(const Options& connOptions)` which is called by both the
constructor and `CConnman::Start(...)`. This method initializes `nLocalServices` and the other
relevant values from the supplied `Options` object.
Tree-SHA512: d8742363acffd03b2ee081cc56840275569e17edc6fa4bb1dee4a5971ffe4b8ab1d2fe7b68f98a086bf133b7ec46f4e471243ca08b45bf82356e8c831a5a5f21
- Increase `BLOCK_CHAIN_SIZE` from 120GB to 150GB
- Increase `CHAIN_STATE_SIZE` from 2GB to 4GB
I took the local sizes of the blocks and chainstate directory, and added
a bit extra to accomodate the near future (15GB for the chain and 1GB
for the chainstate).
49d903e Eliminate fee overpaying edge case when subtracting fee from recipients (Alex Morcos)
Pull request description:
I'm not sure if this is the cause of the issue in #10034 , but this was a known edge case. I just didn't realize how simple the fix is.
Could use a couple more eyes to make sure nothing silly can go wrong here, but if we all agree it's this simple, we can add this as another 0.15 bug fix.
Tree-SHA512: db1dd1e83363a3c231267b626d3a388893ee70ba1972056fe2c339c5c9e4fbfd30f7fe837c30cc7be884d454797fd4c619b9d631a8d5eeb55cdb07402a83acb3
When running test_bitcoin under Valgrind I found the following issue:
```
$ valgrind src/test/test_bitcoin
...
==10465== Use of uninitialised value of size 8
==10465== at 0x6D09B61: ??? (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B1BB: std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_int<unsigned long>(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D0B36C: std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::do_put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, unsigned long) const (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x6D17699: std::ostream& std::ostream::_M_insert<unsigned long>(unsigned long) (in /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21)
==10465== by 0x4CAAD7: operator<< (ostream:171)
==10465== by 0x4CAAD7: formatValue<ServiceFlags> (tinyformat.h:345)
==10465== by 0x4CAAD7: void tinyformat::detail::FormatArg::formatImpl<ServiceFlags>(std::ostream&, char const*, char const*, int, void const*) (tinyformat.h:523)
==10465== by 0x1924D4: format (tinyformat.h:510)
==10465== by 0x1924D4: tinyformat::detail::formatImpl(std::ostream&, char const*, tinyformat::detail::FormatArg const*, int) (tinyformat.h:803)
==10465== by 0x553A55: vformat (tinyformat.h:947)
==10465== by 0x553A55: format<ServiceFlags> (tinyformat.h:957)
==10465== by 0x553A55: std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > tinyformat::format<ServiceFlags>(char const*, ServiceFlags const&) (tinyformat.h:966)
==10465== by 0x54C952: getnetworkinfo(JSONRPCRequest const&) (net.cpp:462)
==10465== by 0x28EDB5: CallRPC(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) (rpc_tests.cpp:31)
==10465== by 0x293947: rpc_tests::rpc_togglenetwork::test_method() (rpc_tests.cpp:88)
==10465== by 0x2950E5: rpc_tests::rpc_togglenetwork_invoker() (rpc_tests.cpp:84)
==10465== by 0x182496: invoke<void (*)()> (callback.hpp:56)
==10465== by 0x182496: boost::unit_test::ut_detail::callback0_impl_t<boost::unit_test::ut_detail::unused, void (*)()>::invoke() (callback.hpp:89)
...
```
The read of the uninitialized variable nLocalServices is triggered by g_connman->GetLocalServices()
in getnetworkinfo(const JSONRPCRequest& request) (net.cpp:462):
```c++
UniValue getnetworkinfo(const JSONRPCRequest& request)
{
...
if(g_connman)
obj.push_back(Pair("localservices", strprintf("%016x", g_connman->GetLocalServices())));
...
}
```
The reason for the uninitialized nLocalServices is that CConnman::Start(...) is not called
by the tests, and hence the initialization normally performed by CConnman::Start(...) is
not done.
This commit adds a method Init(const Options& connOptions) which is called by both the
constructor and CConnman::Start(...). This method initializes nLocalServices and the other
relevant values from the supplied Options object.
This fixes a few cases where we should be treating a restart-after-
coinsviewdb-reset identically to a just-reset-coinsviewdb.
Thanks to @morcos for identifying the bug.
This more clearly uses fReindex vs fReset to make sure we're not
clearing our coinsdb needlessly when restarting after a reindex.
It also makes it so that restarting after shutting down mid-reindex
isn't treates specially at all during txdb loading code, as it
shouldn't be.
This resolves a possible-assert-on-shutdown race introduced in
1f668b6468 when early shutdown
occurs.
Previously this was not done to avoid any cases where the
threadGroup might not exit due to a blocking thread, but at this
point the threadGroup isn't used all that much, plus Qt already
does this, and its good to keep their init/shutdown consistent.
For those curious, the threadGroup is only used in a few places:
* Its used to run the CCheckQueues in script validation, but these
use the boost mutex/condition variable primitives, so they
respect the interrupt pretty trivially.
* Its used for the import thread, which should exit rather quickly
as mostly it just calls LoadExternalBlockFile, which has an
interruption_point right before each block loaded.
* Its used in the scheduler thread, which is only used for:
* validationinterface has an effectively-dummy reference to it.
* wallet compaction, which should not last long
* addr/banlist dumping from CConnman, which should also be fast
e222dc2 Replace ismine with producesignature check in witnessifier (Andrew Chow)
Pull request description:
Instead of using ismine to check whether an address can be spent by us, make the witness version of the script or address first and then use ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
This is to fix cases where we don't have all of the private keys (for something like a multisig address) but have the redeemscript so we can witnessify it.
Tree-SHA512: 371777aee839cceb41f099109a13689120d35cf3880cde39216596cc2aac5cc1096af7d9cf07ad9306c3b05c073897f4518a7e97f0b88642f1e3b80b799f481e
efeb273 Force on-the-fly compaction during pertxout upgrade (Pieter Wuille)
Pull request description:
It seems that LevelDB tends to leave the old "per txid" UTXO entries in the database lying around for a significant amount of time during and after the per-txout upgrade. This introduces a `CompactRange` function in the database wrapper, and invokes it after every batch of updates in `CCoinsViewDB::Upgrade()`. This lowers temporary disk usage during and after the upgrade.
Tree-SHA512: fbf964c0a33f4e73709c999c8a2bfdef974779c15820907398a2f8828f5fa3e4e153ddd9031d6fc5083be81e22b999b9bd826fd063ad8b88f55c5e8342503290
c0025d0 Fix segfault when shutting down before fully loading (Matt Corallo)
1385697 Order chainstate init more logically. (Matt Corallo)
ff3a219 Call RewindBlockIndex even if we're about to run -reindex-chainstate (Matt Corallo)
b0f3249 More user-friendly error message if UTXO DB runs ahead of block DB (Matt Corallo)
eda888e Fix some LoadChainTip-related init-order bugs. (Matt Corallo)
Pull request description:
This does a number of things to clean up chainstate init order,
fixing some issues as it goes:
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Give LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
* Calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
Tree-SHA512: 3c96ee7ed44f4130bee3479a40c5cd99a619fda5e309c26d60b54feab9f6ec60fabab8cf47a049c9cf15e88999b2edb7f16cbe6819e97273560b201a89d90762
Instead of using ismine to check whether an address can be spent by us,
make the witness version of the script or address first and then use
ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
Also fixes test cases to reflect this change.
* Order chainstate init more logically - first all of the
blocktree-related loading, then coinsdb, then
pcoinsTip/chainActive. Only create objects as needed.
* More clearly document exactly what is and isn't called in
-reindex and -reindex-chainstate both with comments noting
calls as no-ops and by adding if guards.
* Move LoadGenesisBlock further down in init. This is a more logical
location for it, as it is after all of the blockindex-related
loading and checking, but before any of the UTXO-related loading
and checking.
* Move all of the VerifyDB()-related stuff into a -reindex +
-reindex-chainstate if guard. It couldn't do anything useful
as chainActive.Tip() would be null at this point anyway.
RewindBlockIndex works over both chainActive - disconnecting blocks
from the tip that need witness verification - and mapBlockIndex -
requiring redownload of blocks missing witness data.
It should never have been the case that the second half is skipped
if we're about to run -reindex-chainstate.
This gives LoadChainTip a return value - allowing it to indicate that
the UTXO DB ran ahead of the block DB. This just provides a nicer
error message instead of the previous mysterious
assert(!setBlockIndexCandidates.empty()) error.
This also calls ActivateBestChain in case we just loaded the genesis
block in LoadChainTip, avoiding relying on the ActivateBestChain
in ThreadImport before continuing init process.
* Move the writing of fTxIndex to LoadBlockIndex - this fixes a
bug introduced in d6af06d68a where
InitBlockIndex was writing to fTxIndex which had not yet been
checked (because LoadChainTip hadn't yet initialized the
chainActive, which would otherwise have resulted in
InitBlockIndex being a NOP), allowing you to modify -txindex
without reindex, potentially corrupting your chainstate!
* Rename InitBlockIndex to LoadGenesisBlock, which is now a more
natural name for it. Also check mapBlockIndex instead of
chainActive, fixing a bug where we'd write the genesis block out
on every start.
df389bc Change wallet method disabled error text (Russell Yanofsky)
e526b3d Fix misleading "Method not found" multiwallet errors (Russell Yanofsky)
Pull request description:
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
Tree-SHA512: 6a8d885283f69bcfc28f2e08ac03eff02f9f8160a312ce2a90d868aa52533434fc0b4c4ab86547c2f09392338956df915637eaf7136a4fc105e6c8179f2d0ac8
72f0060 Replace traditional for with ranged for in primitives (Dag Robole)
Pull request description:
Replace traditional for with ranged for in block and transaction primitives to improve readability
Tree-SHA512: c0fff603d2939149ca48b6aa72b59738a3658d49bd58b2d4ffbc85bdb774d8d5bb808fe526fe22bb9eb214de632834d373e2aab44f6019a83c0b09440cea6528
f228b8e remove some unused functions (Marko Bencun)
Pull request description:
Identified with `cppcheck --enable=unusedFunction .`.
- GetSendBufferSize()'s last use removed in
991955e
- SetPort()'s last use removed in
7e195e8
- GetfLargeWorkInvalidChainFound() was introduced in
e3ba0ef and never used
Tree-SHA512: ea8e5498bec981e42e1342c171c37723c2f5e575c7d6c1a524d9c6cd9b332bdd0d84fddf9e14ca011bb49fb82bd037386382c9afc546b3c2231ae548358bd4f4
065039d [tests] Fix incorrect memory_cleanse(…) call in crypto_tests.cpp (practicalswift)
Pull request description:
`chKey` and `chIV` are pointers, not arrays :-)
Probably the result of copy-pasting of old code where the code was operating on arrays instead of pointers.
If I'm reading the code correctly the absence/presence of these `memory_cleanse(…)` calls won't alter the outcome of the test in question (`TestPassphraseSingle`) even if fixed. Therefore removing.
Tree-SHA512: a053b2817bedf6ef889744e546ce9a0f165dee94aef6850d9d6a6bb05b0018789597371ecf154a4aec8588c0ef5626ef08c23c35e35927f6b0497b5f086146fe
a2420ae Avoid unnecessary work in SetNetworkActive (João Barbosa)
Pull request description:
This PR adds an early return to avoid unnecessary notifications when the status doesn't change.
Tree-SHA512: 85d05ca6fa36cb581f94bc154d08bd72cd53f6a857173c6fb2f184058f9c0208c4cf5e5d196825a78339902d8f256688eb6793f99abc7be9c7cfac85136180d9
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
095b917 Avoid using sizes on non-fixed-width types to derive protocol constants. (Gregory Maxwell)
Pull request description:
Thanks to awemany for pointing this out.
This replaces #10172 which appears to be abandoned, but uses the constants as requested on that PR.
Tree-SHA512: 032c0d75b3aaf807a7d0c7fb8ff5515acc45ad58bd00fe81413f900fe02bad900534a970403b9bb568e132c9eddea6043e958daf625e8acc84375bd41ee2e2ef
9f8a46f Properly document target_confirmations in listsinceblock (Ryan Havar)
Pull request description:
There seems to be some misunderstandings about this, but it's a heavily used function so I'd like to make sure the docs are clear about how it works.
For a later issue:
* Change the default of target_confirmations to 6 (1 is a pretty silly default)
* Change the name of target_confirmations (it's really a horrible name)
Tree-SHA512: a2fba2fab30019cea9db56cd7e31de95ba31090617ab336bdf130f9591bfcf3fc5fbd9e7e1e40b6c7bd2f74b9b4658afb1fdc7fc44e1f79520d1319758982a1c
a56f8b0 Add missing lock in CScheduler::AreThreadsServicingQueue() (Matt Corallo)
Pull request description:
Not an actual bug as this is only used in asserts right now, but
nice to not have a missing lock.
Tree-SHA512: 7e542b150a0be716783e196493d239f2ad15e5376abf54b67d735dc3ef1b10849c090337b849f530c9f7497ddcfb8389b47d64a5dcf6382b7d38838f88cc1100
0be03c7 Qt: Use _putenv_s instead of setenv on Windows builds (Brian McMichael)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10836
Error message I would get on `make`:
```
...
CXXLD bench/bench_bitcoin.exe
OBJCXXLD qt/bitcoin-qt.exe
qt/test/test_main.cpp: In function ‘int main(int, char**)’:
qt/test/test_main.cpp:64:43: error: ‘setenv’ was not declared in this scope
setenv("QT_QPA_PLATFORM", "minimal", 0);
^
make[2]: *** [qt/test/qt_test_test_bitcoin_qt-test_main.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bmcmichael/Projects/bcoin/src'
make: *** [all-recursive] Error 1
```
`setenv` function is not available from the Microsoft runtime library. Need to use `_putenv_s` instead.
This solution tells the compiler to use `_putenv_s` on `WIN32` compilation (Note: this also works on 64-bit Windows instances.) and `setenv` everywhere else.
I've tested builds on Windows 10 x64 and Ubuntu 16.04 with this code.
Tree-SHA512: d53c996c890e3c6f22b4f2dcca718bef9168f19a6d4a29b8ff13391bfc0c8ea9c1cd16782b47c25b156dcbdff18bb19e23bfd5f6fefb1f373c9d5454a13fc969
99c7fc3 Prevent user from specifying conflicting parameters to fundrawtx (Matt Corallo)
Pull request description:
estimate_mode/conf_target both are overridden by feeRate, so should
not be specified together with feeRate.
Based on #10706
Tree-SHA512: 8ccd08575fd1f2a0d45112538ffbbc73983ee172963230b0cc7ac41d13c6f3c740917f82b212c41ded3a64d873452e7f2c7af49f3b47cab897f8e85117f21333
This assures that we don't overwrite a random file called
`wallet.backup` that happens to be in the current directory. It also
assures that the temporary file will be cleaned up.
Noticed by Evan Klitzke, came up in discussion here:
https://github.com/bitcoin/bitcoin/pull/10880#discussion_r128460722
9737572 [Qt] Use wallet 0 in rpc console if running with multiple wallets (Jonas Schnelli)
Pull request description:
Current master with multiwallet results in accessing wallet 0 in QT (send / receive / tx history / etc.), **but** the RPC console cannot access that wallet (only non-wallet commands work).
This is a quick solution to re-allow accessing the same wallet (Index 0) via RPC console in multiwallet.
The solutions design is not "state of the art" (should go over WalletModel). Ideally we work on an overall multiwallet support for the GUI (which then would remove this change).
I think we should consider this as a bugfix.
Tree-SHA512: 16cf844662248ffd3d82c7d0cbe5879f231fbc7d4f5a4aab4180a9087018519c98301e4ac311eaec2cc39dddf25d3edf9be99a6622ea682c138a820a9b21fd0c
a5ecaf1 Fix misspellings and remove safety verbiage (Steven D. Lander)
Pull request description:
Standardizing punctuation on CLI output and also including a few fixes for grammer. This PR is for text only changes and includes no code edits.
Tree-SHA512: afde551bf1212838822188b6723f2bf1b7222decfa1cd7aa6b04967489108a29f80833af6059252af028c53437755f258275af0614e0d4d0311e09421cd8e131
