Clamps the timeout of walletpassphrase to 2^(30) seconds, which is
~34 years. Any number greater than that will be forced to be
2^(30). This avoids the sign flipping problem with large values which
can result in a negative time used.
Also perform bounds checks to ensure that the timeout is positive
to avoid immediate relocking of the wallet.
Make createmultisig only accept public keys with the old functionality
marked as deprecated.
Splits _createmultisig_redeemscript into two functions, one for
getting public keys from UniValue and one for getting addresses
from UniValue and then their respective public keys. The one for
retrieving address's public keys is located in rpcwallet.cpp
Changes addwitnessaddress's output to be a JSON object with
two fields, address and redeemscript.
Adds a test to deprecated_rpc.py for testing the deprecation.
Update the tests to use addwitnessaddress or give only public keys
to createmultisig. Anything that used addwitnessaddress was also
updated to reflect the new API.
18be3ab139 Adding test case for SINGLE|ANYONECANPAY hash type in tx_valid.json (Chris Stewart)
Pull request description:
We are missing a test vector for SINGLE|ANYONECANPAY inside of tx_valid.json. This addresses the issue #12060
Tree-SHA512: e3526113477dbf575c4a844cf489dcfa2c037c6d928af6f97413edc1a8d29cdf2143da96471cdfd3de08bf5ed178117ed67926fd70fd42ca391ac0bb0d08f3fd
New global variables were introduced in #11403 and not setting them causes:
test_bitcoin: wallet/wallet.cpp:4199: CTxDestination GetDestinationForKey(const CPubKey&, OutputType): Assertion `false' failed.
unknown location(0): fatal error in "ListCoins": signal: SIGABRT (application abort requested)
It's possible to reproduce the failure reliably by running:
src/test/test_bitcoin --log_level=test_suite --run_test=wallet_tests/ListCoins
Failures happen nondeterministically because boost test framework doesn't run
tests in a specified order, and tests that run previously can set the global
variables and mask the bug.
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
This introduces two command line flags (-addresstype and -changetype) which control
the type of addresses/outputs created by the GUI and RPCs. Certain RPCs allow
overriding these (`getnewaddress` and `getrawchangeaddress`). Supported types
are "legacy" (P2PKH and P2SH-multisig), "p2sh-segwit" (P2SH-P2WPKH and P2SH-P2WSH-multisig),
and "bech32" (P2WPKH and P2WSH-multisig).
A few utility functions are added to the wallet to construct different address type
and to add the necessary entries to the wallet file to be compatible with earlier
versions (see `CWallet::LearnRelatedScripts`, `GetDestinationForKey`,
`GetAllDestinationsForKey`, `CWallet::AddAndGetDestinationForScript`).
73041c3c99 RPC Docs: addmultisigaddress is intended for non-watchonly addresses (Gregory Sanders)
Pull request description:
Spent a couple hours debugging why my p2sh watchonly funds were not appearing in various accounting calls when address was imported via `addmultisigaddress`.
Tree-SHA512: 0673e276e5ca8cdc4c9357bd835a29bd5a994520a78179600944932c700917142930288bf179f5e89b0874beaf1a88bd70129f3a297a46df42a10bab847017bb
c99a3c32c8 [tests] util_tests.cpp: actually check ignored args (Anthony Towns)
Pull request description:
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
Tree-SHA512: 7b81fde49742e524f1bb67e2ec084f5909ae36125f237f0210df4587c62e5a5a8f277f13543f0a85ad145c4bb80d62339a7d50d7ed41659df318c8198ea7f428
aad3090 [rpc] Adding ::minRelayTxFee amount to getmempoolinfo and updating mempoolminfee help description (Jeff Rade)
Pull request description:
These are RPC document changes from #11475 which is now merged. Took into consideration comments from #11475 and #6941 for this PR.
Biggest change here is when calling `getmempoolinfo`, will now show the `minrelaytxfee` in the JSON reponse (see below):
```
$ bitcoin-cli getmempoolinfo
{
"size": 50,
"bytes": 13102,
"usage": 70480,
"maxmempool": 300000000,
"mempoolminfee": 0.00001000,
"minrelaytxfee": 0.00001000
}
```
Fixes#8953
Tree-SHA512: 5ca583961365ee1cfe6e0d19afb0b41d542e179efee3b3c5f3fcf7d3ebca9cc3eedfd1434a0da40c5eed84fba98b35646fda201e6e61c689b58bee9cbea44b9e
ebcee1de2 bips: add bip176 (Bits Denomination) (William Casarin)
275b2eeed [qt] change µBTC to bits (William Casarin)
Pull request description:
Now that we have bip176, change "µBTC" to the more colloquial "bits"
Tree-SHA512: eba5e5f89c392728a4f0a3bd81a9779a117b8d72a490390fd031d4e7cc56c2bfee0016aba7ef9535903e8cf2262ce46497283424e378906d0e3bf5b0d2d981c7
6dda059bd [qt] Simplifies boolean expression model && model->haveWatchOnly() (251)
Pull request description:
This PR optimizes the boolean expression `model && model->haveWatchOnly()` to `model->haveWatchOnly()`.
The boolean expression can be optimized because the method `TransactionView::exportClicked` already guards against a potential dereferenced null pointer by returning early if `model` is null.
63a4dc1087/src/qt/transactionview.cpp (L351-L353)
Tree-SHA512: 8bdd0d05bf879745fa39d3ca7524471720ae08ceee9427d5a08776e7b56d18542ae87a6991cd6779e232305f504fdfc77223702b72ecbe231f5f5e98453456dd
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
This adds new fields 'pubkeys' and 'embedded' to the RPC's output, and improves the
documentation for previously added 'witness_version' and 'witness_program' fields.
595a7ba Increment MIT Licence copyright header year on files modified in 2017 (Akira Takizawa)
Pull request description:
Edited via:
$ contrib/devtools/copyright_header.py update .
ps) It is the same commit as #9450
Tree-SHA512: 274bfcd6cf2914315ed52f6db773a68800ce9d6bd225a3142654483f0bbc3fd865009e62f9d954f65765d038c626e55d2a64e37e16843809adc2f67abe659b6d
The boolean expression model && model->haveWatchOnly() can be simplified to model->haveWatchOnly(), because if (!model || !model->getOptionsModel()) { return; } guards against a potential dereferenced null pointer.
Implements a virtual destructor on the BaseRequestHandler class to protect against undefined behavior in
the event that a derived BaseRequestHandler class has a destructor and an object of such derived class
is destroyed through a pointer to its base class.
97d2b09c12 Add helper to wait for validation interface queue to catch up (Matt Corallo)
36137497f1 Block ActivateBestChain to empty validationinterface queue (Matt Corallo)
5a933cefcc Add an interface to get the queue depth out of CValidationInterface (Matt Corallo)
a99b76f269 Require no cs_main lock for ProcessNewBlock/ActivateBestChain (Matt Corallo)
a734896038 Avoid cs_main in net_processing ActivateBestChain calls (Matt Corallo)
66aa1d58a1 Refactor ProcessGetData in anticipation of avoiding cs_main for ABC (Matt Corallo)
818075adac Create new mutex for orphans, no cs_main in PLV::BlockConnected (Matt Corallo)
Pull request description:
This should fix#11822.
It ended up bigger than I hoped for, but its not too gnarly. Note that "
Require no cs_main lock for ProcessNewBlock/ActivateBestChain" is mostly pure code-movement.
Tree-SHA512: 1127688545926f6099449dca6a4e6609eefc3abbd72f1c66e03d32bd8c7b31e82097d8307822cfd1dec0321703579cfdd82069cab6e17b1024e75eac694122cb
* Now that we have bip176, change "µBTC" to the more colloquial "bits"
* We retain the `µBTC (bits)` description in dropdowns and status bars.
The more concise "bits" is used when appended to numbers.
Signed-off-by: William Casarin <jb55@jb55.com>
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
760af84 Removed CCheckQueueSpeed benchmark (Martin Ankerl)
00721e6 Improved microbenchmarking with multiple features. (Martin Ankerl)
Pull request description:
The benchmark's KeepRunning() used to make a function call for each call, inflating measurement times for short running code. This change inlines the critical code that is executed each run and moves the slow timer updates into a new function.
This change increases the average runtime for Trig from 0.000000082339208 sec to 0.000000080948591.
Tree-SHA512: 36b3bc55fc9b1d4cbf526b7103af6af18e9783e6b8f3ad3adbd09fac0bf9401cfefad58fd1e6fa2615d3c4e677998f912f3323d61d7b00b1c660d581c257d577
3e1ee31 [Tests] Adding unit tests for GetDifficulty in blockchain.cpp. (sean)
Pull request description:
blockchain.cpp has low unit test coverage. This commit is intended
to start improving its code coverage to reasonable levels. One or more
follow up commits will complete the task that this commit is starting
(though the usefulness of this commit is not dependent upon later
commits).
Note that these tests were not written based upon a specification of how
GetDifficulty *should* work, but rather how it actually *does* work. As
a result, if there are any bugs in the current GetDifficulty
implementation, these unit tests serve to lock them in rather than
expose them.
-- Why has blockchain.cpp been modified if this is a unit testing change?
Since the existing GetDifficulty function relies on a global variable,
chainActive, it was not suitable for unit testing purposes. Both the
existing GetDifficulty function and the unit tests now call through to
a new, more modular version of GetDifficulty that can work on any chain,
not just chainActive.
-- Why does blockchain_tests.cpp directly include blockchain.cpp instead
of blockchain.h?
While the new GetDifficulty function's signature is arguably better than
the old one's, it still isn't great, and doesn't seem to warrant inclusion
as part of the blockchain.h API, especially since only test code is
directly using it. If a better way of exposing the new GetDifficulty
function to unit tests exists, please mention it and the commit will be
updated accordingly.
-- Why is the test fixture named blockchain_difficulty_tests rather than
blockchain_tests?
The Bitcoin Core policy for naming unit test files is to match the the
file under test ("blockchain" becomes "blockchain_tests"). While this
commit complies with that, blockchain.cpp is a massive file, such that
having all of the unit tests in one file will tend towards disorder.
Since there will be a lot more tests added to this file, the intention
is to divide up different types of tests into different test fixtures
within the same file.
Tree-SHA512: a7dda9c2a9414d4819b4d2911f5637891dc19cecbecfc1463846161d2a78793151927a5ab911c69a5d3013f7668e75a1d78a65667cb9d83910cda439cbe84d62
* inline performance critical code
* Average runtime is specified and used to calculate iterations.
* Console: show median of multiple runs
* plot: show box plot
* filter benchmarks
* specify scaling factor
* ignore src/test and src/bench in command line check script
* number of iterations instead of time
* Replaced runtime in BENCHMARK makro number of iterations.
* Added -? to bench_bitcoin
* Benchmark plotly.js URL, width, height can be customized
* Fixed incorrect precision warning
GUI wallet uses RBF by default, regardless of -walletrbf.
RPC and debug console in the GUI remain unchanged; they don't
use RBF by default, unless launched with -walletrbf=1.
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
aac6b3f067 Update files.md for new wallets/ subdirectory (MeshCollider)
b67342906c Cleanups for walletdir PR (MeshCollider)
Pull request description:
This addresses the remaining nits from https://github.com/bitcoin/bitcoin/pull/11466
- Updates `doc/files.md` with respect to the new default wallet directory
- Fixes @promag and @laanwj's error message nit, and Jonas' release notes nit
- ~Addresses @laanwj's net-specific wallet subdirectory concern in the case that a walletdir is specified~
- Changes the #includes from "" to <> style after #11651
Tree-SHA512: b86bf5fdc4de54c1b0f65b60a83af3cf82b35d216ce9c0de724803bfba6934796238b6c412659dcc29ae2e3e856d4eb97ae777c80f36f4089d8acecfddefe9aa
git keeps changing the number of digits in abbreviated hashes, resulting in the GitHub archive hash changing because we include it here.
To workaround this and avoid hashes that become increasingly ambiguous later on, just include the full commit hash when building from git.
This has no effect on tagged releases.
f455a24 [net] add seed.testnet.bitcoin.sprovoost.nl to testnet DNS seeds (Sjors Provoost)
Pull request description:
I tested it myself by:
* `dig seed.testnet.bitcoin.sprovoost.nl` (should have propagated by now, but if you only see two records with `A 66.111... ` try again later)
* deleting the other seeds and all data in `.../testnet3`, recompiling and then starting the node. Log shows `21 addresses found from DNS seeds`.
ACK https://github.com/bitcoin/bitcoin/blob/master/doc/dnsseed-policy.md
I'm willing to keep it up and running at least throughout 2018, unless something bad happens.
About my setup:
* Amazon EC2 instance in Europe, running Ubuntu 16.04; I use this instance for some other chores, but only port 53 is world reachable (for mainnet I'd probably run a dedicated instance, and perhaps a location I have physical control over)
* running [sipa/bitcoin-seeder](https://github.com/sipa/bitcoin-seeder) with default settings (and the non-root port redirect)
* feedback about my domain / DNS setup is welcome, I can provide more details via private email
I can use guidance on _Any hosting services contracted by the operator are equally expected to uphold these expectations_. Although I assume the requirements for testnet are less strict than for mainnet, in case I want to pursue the latter in the future: what unpleasant things can Amazon, my domain registrar and other intermediaries do? How would I mitigate that?
Also note that The Netherlands passed some pretty onerous legislation creating uncertainty over what the secret service can compel people like myself to do. However these laws won't take effect before mid 2018, there's probably more interesting targets than myself to go after, and it's easier for them to just monitor all unencrypted P2P traffic everywhere, or monitor some intermediary I depend on.
Any good tools for monitoring uptime?
Tree-SHA512: 386fe688e5006ab8352d93ab3954fc07dc566876ae002891baa51acfaa5bb113f51b1f5ca08c7394a530b10a2f5008c56d57153af3ed07544a305586dda06b97
2862b56 [tests] remove redundant univalue_tests.cpp (John Newbery)
Pull request description:
univalue unit tests were added in #4730 , and exist at `/src/test/univalue_tests.cpp` (outside the univalue tree). That test was brought into the univalue repository in https://github.com/bitcoin-core/univalue/pull/4 , which was pulled into the github repository in https://github.com/bitcoin/bitcoin/pull/11420.
That means that the univalue test exists in two places:
1. `/src/test/univalue_tests.cpp`
2. `/src/univalue/test/object.cpp`
(2) is a strict superset of (1). It adds some macros to work around boost not being a univalue dependency, and adds a few extra lines of test.
Therefore remove `/src/test/univalue_tests.cpp`
Tree-SHA512: 3747b10bbf62e9f12363905488b29945ad559ddca68c5c03d8a362de612a51f408f41a04d3712c6889bfc1632fb1a5fa0d7df0fbf02c322b3981a6d698f501b0
88411e9 Squashed 'src/univalue/' changes from fe805ea74f..07947ff2da (MarcoFalke)
Pull request description:
Pulls in the test changes to the univalue subtree.
Beside looking at the code, reviewers should refer to https://github.com/bitcoin/bitcoin/blob/master/contrib/devtools/README.md#git-subtree-checksh on how to verify the subtree pull.
Tree-SHA512: 09493625a573dca1140570326ee90c1bb84e4893e1dab2cdd51bc23ae1fba1e33c43ed771ca9e112ac71b0242e8a8d058071334562c738d502587eadd5a0f114
0.15.0 introduced a new feeest file format, and support for parsing
old versions was never fully added. We now simply fail to read the
old format, so remove the dead partial-implementation.
3a3a9f9 Ignore old format estimation file (Murch)
Pull request description:
The fee estimation data format changed from 0.14.x to 0.15.0, so we should no longer read the old data. H/T @jnewbery, @morcos
Pending testing.
Tree-SHA512: c8e3824dbdd8f6730133d5ad20b00995e9a63ab54431158a91e2f4d2aba5763b8aa698bce1fffca2713ba3a162e23d8fcd6e3efb9847b015c2e1e8725398150b
ecf9b25 remove unused fNoncriticalErrors variable from CWalletDB::FindWalletTx (Pierre Rochard)
Pull request description:
The `CWalletDB::FindWalletTx` method was patterned after `CWalletDB::LoadWallet`, where `fNoncriticalErrors` is used when a tx check fails in `ReadKeyValue`.
Since `FindWalletTx` is only used by methods which are zapping txs, it makes sense that `ReadKeyValue` is not called and the tx is not checked, so I think that deleting the unused `fNoncriticalErrors` boolean variable and its conditional statement is appropriate.
Tree-SHA512: 0976eae97522719fdaeca1fb3f4a080561e46c06d0b8dc75e14262c6bc242998db3f7057183a230a1d7e4ac5fc348e9059f545b7d718ebbcdf6dcdfc63bcc286
12781db [Tests] check specific validation error in miner tests (Sjors Provoost)
Pull request description:
## Problem
`BOOST_CHECK_THROW` merely checks that some `std::runtime_error` is
thrown, but not which one.
Here's an example of how this can cause a test to pass when a developer
introduces a consensus bug. The test for the sigops limit assumes
that `CreateNewBlock` fails with `bad-blk-sigops`. However it can
also fail with bad-txns-vout-negative, if a naive developer lowers
`BLOCKSUBSIDY` to `1*COIN`.
## Solution
`BOOST_CHECK_EXCEPTION` allows an additional predicate function. This
commit uses this for all exceptions that are checked for in
`miner_tets.cpp`:
* `bad-blk-sigops`
* `bad-cb-multiple`
* `bad-txns-inputs-missingorspent`
* `block-validation-failed`
If the function throws a different error, the test will fail. Although the message produced by Boost is a bit [confusing](http://boost.2283326.n4.nabble.com/Test-BOOST-CHECK-EXCEPTION-error-message-still-vague-tt4683257.html#a4683554), it does show which error was actually thrown. Here's what the above `1*COIN` bug would result in:
<img width="1134" alt="schermafbeelding 2017-09-02 om 23 42 29" src="https://user-images.githubusercontent.com/10217/29998976-815cabce-9038-11e7-9c46-f5f6cfb0ca7d.png">
## Other considerations
A more elegant solution in my opinion would be to subclass `std::runtime_error` for each `INVALID_TRANSACTION` type, but this would involve touching consensus code.
I put the predicates in `test_bitcoin.h` because I assume they can be reused in other test files. However [serialize_tests.cpp](https://github.com/bitcoin/bitcoin/blob/v0.15.0rc3/src/test/serialize_tests.cpp#L245) also uses `BOOST_CHECK_EXCEPTION` and it defines the predicate in the test file itself.
Instead of four `IsRejectInvalidReasonX(std::runtime_error const& e)` functions, I'd prefer something reusable like `bool IsRejectInvalidReason(String reason)(std::runtime_error const& e)`, which would be used like `BOOST_CHECK_EXCEPTION(functionThatThrows(), std::runtime_error, IsRejectInvalidReason("bad-blk-sigops")`. I couldn't figure out how to do that in C++.
Tree-SHA512: e364f19b4ac19f910f6e8d6533357f57ccddcbd9d53dcfaf923d424d2b9711446d6f36da193208b35788ca21863eadaa7becd9ad890334d334bccf8c2e63dee1
6f39ac0 Add test for decoderawtransaction bool (MeshCollider)
bbdbe80 Add iswitness parameter to decode- and fundrawtransaction RPCs (MeshCollider)
Pull request description:
Suggested in https://github.com/bitcoin/bitcoin/pull/10481#issuecomment-325244946, this adds the option to explicitly choose whether a serialized transaction should be decoded as a witness or non-witness transaction rather than relying on the heuristic checks in #10481. The parameter defaults to relying on #10481 if not included, but it overrides that if included.
Tree-SHA512: d4846a5bb7d64dc19c516445488b00af329fc1f4181d9dfdf9f2382a086568edc98250a4ac7594e24a1bc231dfdee53c699b12c8380c355b920a67cc6770b7a9
c79d73d Clarify getbalance meaning a tiny bit in response to questions. (Matt Corallo)
Pull request description:
Someone was asking why getbalance "*" was more "correct" than getbalance, which should rarely be true...spendzeroconfchange was the issue.
Tree-SHA512: 90201cad1acec5161aee469fb4c6d737a0eb90f8380ac93abf0e41e0f02d120afcc3e2e873e5096d3655bb63bbd16fe99e72452f308d72e69139c7f6bb2d745e
57ac471 Call BannedListChanged outside of cs_setBanned lock (Jonas Schnelli)
c853812 Update ban-state in case of dirty-state during periodic sweep (Jonas Schnelli)
Pull request description:
We do currently not update the UI during periodic ban list sweeps (via dump banlist).
Fixes#11612
Tree-SHA512: bffbdcc03c63042177bdd511b0a9187c211c2b5011178481e8ee3e43a71eef1e4cd6b72f73672babab142b644f62f8b56f0aac1d26d3f19372b1f8644fec9395
99ba0c3 Don't use pass by reference to const for cheaply-copied types (bool, char, etc.). (practicalswift)
Pull request description:
Don't use pass by reference to const for cheaply-copied types (`bool`, `char`, etc.).
Tree-SHA512: ccad5e2695dff0b3d6de3e713ff3448f2981168cdac72d73bee10ad346b9919d8d4d588933369e54657a244b8b222fa0bef919bc56d983e1fa64b2004e51b225
03a5dc9 [wallet] Make CWallet::FundTransaction atomic (João Barbosa)
95d4450 [wallet] Tidy up CWallet::FundTransaction (João Barbosa)
Pull request description:
This PR fixes a race for `setLockedCoins` when `lockUnspents` is true. For instance, it should not be possible to use the same unspent in concurrent `fundrawtransaction` calls.
Now the `cs_main` and `cs_wallet` locks are held during `CreateTransaction` and `LockCoin`(s). Also added some style nits around the change.
Tree-SHA512: ccf383c0c5f6db775655a3e9ccd200c3bd831a83afae2b7c389564c74f7227f5bea86a4775727de2c3603b188f383f8a12d3f9d6d94f7887865c31c94ce95ef6
88af502 test: Add createrawtransaction functional tests (João Barbosa)
27c6199 test: Add multidict to support dictionary with duplicate key (laanwj) (João Barbosa)
320669a rpc: Validate replaceable type in createrawtransaction (João Barbosa)
Pull request description:
This was motivated by the `Invalid parameter, duplicated address` test.
Credit to @laanwj for `multidict` implementation.
Tree-SHA512: a87139ae11004b73b467db1e8a072b75e23a0622b173a5668eed383b3575d8abc709817ddd2dfdc53f55afc90750fb61331199ad5de38c1ef6d482f2bc220f74
fbf327b Minimal code changes to allow msvc compilation. (Aaron Clauson)
Pull request description:
These changes are required to allow the Bitcoin source to build with Microsoft's C++ compiler (#11562 is also required).
I looked around for a better place for the typedef of ssize_t which is in random.h. The best candidate looks like src/compat.h but I figured including that header in random.h is a bigger change than the typedef. Note that the same typedef is in at least two other places including the OpenSSL and Berkeley DB headers so some of the Bitcoin code already picks it up.
Tree-SHA512: aa6cc6283015e08ab074641f9abdc116c4dc58574dc90f75e7a5af4cc82946d3052370e5cbe855fb6180c00f8dc66997d3724ff0412e4b7417e51b6602154825
3830b6e net: use CreateSocket for binds (Cory Fields)
df3bcf8 net: pass socket closing responsibility up to caller for outgoing connections (Cory Fields)
9e3b2f5 net: Move IsSelectableSocket check into socket creation (Cory Fields)
1729c29 net: split socket creation out of connection (Cory Fields)
Pull request description:
Requirement for #11227.
We'll need to create sockets and perform the actual connect in separate steps, so break them up.
#11227 adds an RAII wrapper around connection attempts, as a belt-and-suspenders in case a CloseSocket is missed.
Tree-SHA512: de675bb718cc56d68893c303b8057ca062c7431eaa17ae7c4829caed119fa3f15b404d8f52aca22a6bca6e73a26fb79e898b335d090ab015bf6456cf417fc694
We use select in ConnectSocketDirectly, so this check needs to happen before
that.
IsSelectableSocket will not be relevant after upcoming changes to remove select.
9c8eca7 Split up key and script metadata for better type safety (Russell Yanofsky)
Pull request description:
Suggested by @TheBlueMatt
https://github.com/bitcoin/bitcoin/pull/11403#discussion_r155599383
Combining the maps was probably never a good arrangement but is more
problematic now in presence of WitnessV0ScriptHash and WitnessV0KeyHash types.
Tree-SHA512: 9263e9c01090fb49221e91d88a88241a9691dda3e92d86041c8e284306a64d3af5e2438249f9dcc3e6e4a5c11c1a89f975a86d55690adf95bf2636f15f99f92a
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
22fddde Avoid calling GetSerializeSize on each tx in a block if !fTxIndex (Matt Corallo)
2862aca Move some additional variables into CChainState private (Matt Corallo)
fd4d80a Create initial CChainState to hold chain state information (Matt Corallo)
e104f0f Move block writing out of AcceptBlock (Matt Corallo)
50701ba Move txindex/undo data disk location stuff out of ConnectBlock (Matt Corallo)
93a34cf Make DisconnectBlock unaware of where undo data resides on disk (Matt Corallo)
Pull request description:
CChainState should eventually, essentially, be our exposed "libconsensus", but we're probably a few releases away, so the real goal is to clarify our internal interfaces. The main split was a big step, but validation.cpp is still a somewhat ranomly-mixed bag of functions that are pure functions which validate inputs (which should probably either merge with their callers or move into another file in consensus/), read/write data from disk, manipulate our current chain state (which moves into CChainState), and do mempool transaction validation.
Obviously this is only a small step, but some effort is made to clean up what functions the functions in CChainState call, and obviously as things are added its easy to keep clear "CChainState::* cannot call anything except via callbacks through CValidationInterface, pure functions, or disk read/write things". Right now there are some glaring violations in mempool callbacks, and general flushing logic needs cleaning up (FlushStateToDisk maybe shouldnt be called, and there should be an API towards setDirtyBlockIndex, but I'll leave that for after @sipa's current changesets land).
Tree-SHA512: 69b8ec191b36b19c9492b4dee74c8057621fb6ec98ad219e8da0b2ed5c3ad711b10b5af9ff1117e8807ccf88918eeeab573be8448baecc9a59f099c53095985b
07c4838 Always return true if AppInitMain got to the end (Matt Corallo)
Pull request description:
This should fix a rare zapwallettxes failure on travis, but also
avoids having init operations (re-adding wallet transactions to
mempool) running after RPC is free'd.
I believe this was the failure at https://travis-ci.org/bitcoin/bitcoin/jobs/311747844 (from #11605).
Tree-SHA512: f0fea8c1b9265e2eeda57043d541380a3e58e4d9388fa24628a52fd56324257fcd7df0ca02e8f77f66fadd68d951893bab0f610ed9fd0a89b2ccd6bad1efa351
01013f5 Simplify tx validation tests (Pieter Wuille)
2dd6f80 Add a test that all flags are softforks (Pieter Wuille)
2851b77 Make all script verification flags softforks (Pieter Wuille)
Pull request description:
This change makes `SCRIPT_VERIFY_UPGRADABLE_NOPS` not apply to `OP_CHECKLOCKTIMEVERIFY` and `OP_CHECKSEQUENCEVERIFY`. This is a no-op as `UPGRADABLE_NOPS` is only set for mempool transactions, and those always have `SCRIPT_VERIFY_CHECKLOCKTIMEVERIFY` and `SCRIPT_VERIFY_CHECKSEQUENCEVERIFY` set as well. The advantage is that setting more flags now always results in a reduction in acceptable scripts (=softfork).
This results in a nice and testable property for validation, for which a new test is added.
This also means that the introduction of a new definition for a NOP or witness version will likely need the following procedure (example OP_NOP8 here)
* Remove OP_NOP8 from being affected by `SCRIPT_VERIFY_DISCOURAGE_UPGRADABLE_NOPS`.
* Add a `SCRIPT_VERIFY_DISCOURAGE_NOP8`, which only applies to `OP_NOP8`.
* Add a `SCRIPT_VERIFY_NOP8` which implements the new consensus logic.
* Before activation, add `SCRIPT_VERIFY_DISCOURAGE_NOP8` to the mempool flags.
* After activation, add `SCRIPT_VERIFY_NOP8` to both the mempool and consensus flags.
Tree-SHA512: d3b4538986ecf646aac9dba13a8d89318baf9e308e258547ca3b99e7c0509747f323edac6b1fea4e87e7d3c01b71193794b41679ae4f86f6e11ed6be3fd62c72
a3f5657 Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512 (practicalswift)
Pull request description:
* Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512.
* ~~Avoid creating a one-past-the-end pointer in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
* ~~Avoid performing a noop memset call (zero length argument) in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
Tree-SHA512: 48ff9ab79d41aab97b5b8f6496cc08a39955a07eb424f74ada6440d3b168b6204d3527fa677e175c47e40142f9d62c7456ae162e5a2f5b557e90fb353beef1d0
be9f38c Do not make it trivial for inbound peers to generate log entries (Matt Corallo)
Pull request description:
Based on #11580 because I'm lazy.
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).
Tree-SHA512: 8e59c8d08d00b1527951b30f4842d010a4c2fc440503ade112baa2c1b9afd0e0d1c5c2df83dde25183a242af45089cf9b9f873b71796771232ffb6c5fc6cc0cc
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
fa4c16d qa: Add getrawtransaction in_active_chain=False test (MarcoFalke)
Pull request description:
#10275 accidentally forgot to add a test for `in_active_chain==False`.
This adds a test and also removes the special casing of `blockhash.IsNull()`, which makes no sense imo.
Tree-SHA512: 6c51295820b3dcd53b0b48020ab2b8c8f5864cd5061ddab2b35d35d643eb3e60ef95ff20c06c985a2e47f7080e82f27f3e00ee61c85dce627776d5ea6febee8f
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
529b866 Test datadir in conf file exists (MeshCollider)
Pull request description:
Provoked by Nick ODell's discovery here: https://bitcoin.stackexchange.com/questions/64189/when-running-bitcoind-i-keep-getting-boostfilesystemspace-operation-not-p/64210#64210
If a custom data directory is specified using `-datadir` argument, its existence is checked before the conf file is loaded. But if the conf file then specifies a different non-existent `datadir`, that isn't tested, and results in esoteric errors like:
EXCEPTION: N5boost10filesystem16filesystem_errorE
boost::filesystem::space: Operation not permitted
This just adds a check for the datadir existence at the end of `ReadConfigFile()`
Tree-SHA512: e488618c40aa356263f94040ae00aa4be98038abef66e8674b01032d22a5553a7fafcb8fe2d1f095865b39fb138c07b7a94415a00ef837573f92f95af065f712
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
This should fix a very rare travis failure in zapwallettxes, but
is also more correct, as you can currently race
ReacceptWalletTransactions with stop RPC calls to get bitcoind to
(IMO) eroneously return a non-0 exit code.
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
b4058ed Fix code constness in CBlockIndex::GetAncestor() overloads (Dan Raviv)
Pull request description:
Make the non-const overload of `CBlockIndex::GetAncestor()` reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
Tree-SHA512: 545a8639bc52502ea06dbd924e8fabec6274fa69b43e3b8966a7987ce4dae6fb2498f623730fde7ed0e47478941c7f8baa2e76a12018134ff7c14c0dfa25ba3a
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
e4d0af4 Loop through the bip9 soft fork deployments instead of hard coding (Andrew Chow)
Pull request description:
Instead of hard coding which deployment statistics should be listed in the `getblockchaininfo` output, loop through the available deployments (except testdummy) when displaying their deployment info.
Tree-SHA512: 87e503bcf5e0fd379940d5e53320b9cbb4b47d647c66246d46f47c09a941f135e6ce1e8b75dad441ed4c22c3f41992dfde7717414be1d71c771d4ff8fe0e1936
9b80fc1 Prefix leveldb debug logging (Wladimir J. van der Laan)
Pull request description:
Add leveldb: prefix to leveldb debug logging lines.
leveldb debug messages come in various scary flavors such as:
2017-11-30 08:26:31 leveldb: Recovering log #26
2017-11-30 08:26:31 leveldb: Level-0 table #28: started
2017-11-30 08:26:31 leveldb: Level-0 table #28: 597 bytes OK
2017-11-30 08:26:31 leveldb: Delete type=0 #26
2017-11-30 08:26:31 leveldb: Delete type=3 #24
so it's reasonably important to mark them as coming from leveldb internals and not from consensus validation wallet or such.
This is consistent with the `libevent:` prefix for libevent messages.
(this only affects `-debug=leveldb` or `-debug=1` otherwise you won't see them in the first place)
Tree-SHA512: 074eba00d39c6378b9e14d03aa2c551b4e3fc7bffdd5a1a0ba2498b44bcc77071d47735be09493286056053f0cca625c5cbaad7ad1ddb9d902d30e7cd316d9d2
This patch adds an option to configure the name and/or directory of the
debug log.
The user can specify either a relative path, in which case the path
is relative to the data directory. They can also specify an absolute
path to put the log anywhere else in the file system.
d31e5c1 Fix shutdown in case of errors during initialization (Wladimir J. van der Laan)
Pull request description:
PR #10286 introduced a few steps which are not robust to early shutdown in initialization.
Stumbled upon this with #11781, not sure if there are other scenarios that can trigger it, but it's good to harden against this in any case.
E.g.
```
$ src/bitcoind -debuglogfile=/dfdf
Error: Could not open debug log file /dfdf
Program received signal SIGSEGV, Segmentation fault.
UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
82 g_signals.m_internals->BlockChecked.disconnect(boost::bind(&CValidationInterface::BlockChecked, pwalletIn, _1, _2));
(gdb) bt
#0 UnregisterValidationInterface (pwalletIn=0x0) at /.../bitcoin/src/validationinterface.cpp:82
#1 0x00005555555a11fc in Shutdown () at /.../bitcoin/src/init.cpp:196
#2 0x00005555555961cc in AppInit (argc=<optimized out>, argv=<optimized out>) at /.../bitcoin/src/bitcoind.cpp:183
#3 0x0000555555596249 in main (argc=0, argv=0x555555ecf200) at /.../bitcoin/src/bitcoind.cpp:19
```
Tree-SHA512: 7dd9570a9803514a17781bfadf1edde47e96df4e852cce2f423cab422e005fb94d44e777af1a6ea5167b04a4d889e848ae7a61a7e0e94232247ddea32ee70fc8
c60c49b Improve help text and behavior of RPC-logging (Akio Nakamura)
Pull request description:
1. It is allowed `libevent` logging to be updated during runtime,
but still described that restriction in the help text.
So we delete these text.
2. Add a descrption about the evaluation order of `<include>` and
`<exclude>` to clarify how debug loggig categories to be set.
3. Add a description about the available logging category `"all"`
which is not explained.
4. Add `"optional"` to the help text of `<include>` and `<exclude>`.
5. Add missing new lines before `"Argument:"`.
6. `"0"`,`"1"` are allowed in both array of `<include>` and `<exclude>`.
`"0"` is **ignored** and `"1"` is treated **same as** `"all"`.
It is confusing, so forbid them.
7. It always returns all logging categories with status.
Fix the help text to match this behavior.
Tree-SHA512: c2142da1a9bf714af8ebc38ac0d82394e2073fc0bd56f136372e3db7b2af3b6746f8d6b0241fe66c1698c208c124deb076be83f07dec0d0a180ad150593af415
Add leveldb: prefix to leveldb debug logging lines.
leveldb debug messages come in various scary flavors such as:
2017-11-30 08:26:31 leveldb: Recovering log #26
2017-11-30 08:26:31 leveldb: Level-0 table #28: started
2017-11-30 08:26:31 leveldb: Level-0 table #28: 597 bytes OK
2017-11-30 08:26:31 leveldb: Delete type=0 #26
2017-11-30 08:26:31 leveldb: Delete type=3 #24
so it's reasonably important to mark them as coming from leveldb
internals and not from consensus validation wallet or such.
(this only affects `-debug=leveldb` or `-debug=1` otherwise you won't
see them in the first place)
8b2c733 clarify abortrescan rpc use (Gregory Sanders)
Pull request description:
`-rescan` during startup doesn't apply since RPC has not warmed up by that point
Tree-SHA512: 0b6738ed9429ca41edbfa23bb3e2da23bb16fed9e55c1803ab140b2efc49ef3295bb8b7eeb8c24df94204c5b3fb25d0d57cbc8d1be11856a5763c9fde71bceba
9d811dc Document partial validation in ConnectBlock() (Suhas Daftuar)
Pull request description:
`ConnectBlock()` relies on validation that happens in `ContextualCheckBlock()` and
`ContextualCheckBlockHeader()`. This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
Tree-SHA512: 36a252af2221b0e5d5d6f8d5f8b16f8b566ca0db2d56242130a5523302c8757599ac234594a6a946c1689b260d18a32c2c7f8c3831304e78b9832e2ce5ac435a
e1a8ec5 Fix: Open files read only if requested (Andras Elso)
Tree-SHA512: 047951bf3fa1272764596d2efed0a541105a6d3057789ba4218cd1bbce8a802cab0feac0ed3d28f6eab6b2e54e294d46f729dd0162d6d209e319d716c0567352
PR #10286 introduced a few steps which are not robust to early shutdown
in initialization.
Stumbled upon this with #11781, not sure if there are other scenarios
that can trigger it, but it's harden against this in any case.
abbd230 Move RPC registration out of AppInitParameterInteraction (Russell Yanofsky)
Pull request description:
Move to AppInitServers. This doesn't have any effects on bitcoin behavior. It was just strange to have this unrelated code in the middle of parameter interaction.
Tree-SHA512: 373e18f2ef8d21999ad36295d69326128a3086044acfc8ed537abd5497c8d3620b9832f7f6aa87c0c0939bb5e0d92be8a3c006b5997e9e6fa20334f5610c89bc
blockchain.cpp has low unit test coverage. This commit is intended
to start improving its code coverage to reasonable levels. One or more
follow up commits will complete the task that this commit is starting
(though the usefulness of this commit is not dependent upon later
commits).
Note that these tests were not written based upon a specification of how
GetDifficulty *should* work, but rather how it actually *does* work. As
a result, if there are any bugs in the current GetDifficulty
implementation, these unit tests serve to lock them in rather than
expose them.
-- Why has blockchain.cpp been modified if this is a unit testing change?
Since the existing GetDifficulty function relies on a global variable,
chainActive, it was not suitable for unit testing purposes. Both the
existing GetDifficulty function and the unit tests now call through to
a new, more modular version of GetDifficulty that can work on any chain,
not just chainActive.
-- Why does blockchain_tests.cpp directly include blockchain.cpp instead
of blockchain.h?
While the new GetDifficulty function's signature is arguably better than
the old one's, it still isn't great, and doesn't seem to warrant inclusion
as part of the blockchain.h API, especially since only test code is
directly using it. If a better way of exposing the new GetDifficulty
function to unit tests exists, please mention it and the commit will be
updated accordingly.
-- Why is the test fixture named blockchain_difficulty_tests rather than
blockchain_tests?
The Bitcoin Core policy for naming unit test files is to match the the
file under test ("blockchain" becomes "blockchain_tests"). While this
commit complies with that, blockchain.cpp is a massive file, such that
having all of the unit tests in one file will tend towards disorder.
Since there will be a lot more tests added to this file, the intention
is to divide up different types of tests into different test fixtures
within the same file.
d9340ce Fix sendrawtransaction hang when sending a tx already in mempool (Matt Corallo)
Pull request description:
I assume this is what #11721 actually hit.
Tree-SHA512: 1da4088bbda64c5527233de9ec4d03f9e0c1eacddb2ed3deab3cb99eac0293ee6fb846830f97b5e10e230307b6d7fd18013043173aa4f27ef171d9da626e2c88
65e91f5ed [tests] Test that mempool rejects coinbase transactions (James O'Beirne)
Pull request description:
Neither the unit nor functional tests appear to cover rejecting a transaction from acceptance to the mempool on the basis of it being a coinbase. Seems like a decent thing to have a test for.
Tree-SHA512: 53af53c975cad5d7a21c443d71a1c0ced5c70a7799b75bb44d9b7dd6ab2afbcdcaab14571540efeb848f3a1daee5e1dd856530d8f2b50582595219a1c17555ff
ConnectBlock() relies on validation that happens in ContextualCheckBlock() and
ContextualCheckBlockHeader(). This has implications for implementing consensus
changes and handling software upgrade to ensure that nodes upgrading their
software end up enforcing all the consensus rules.
A) The changes in behavior are as follows:
1. Introduce logging category "none" as alias of "0" for
both RPC-logging and bitcoind "-debug" parameter.
2. Same as "0" is given to argument of "-debug",
if "none" or "0" is given to <include>, all other given logging
categories are ignored. The same is true for <exclude>.
(Before this PR, "0" was accepted but just be ignored itself.)
B) The changes in the help text are as follows:
1. Add a descrption about the evaluation order of <include> and
<exclude> to clarify how debug loggig categories to be set.
2. Delete text that describe restriction about libevent because
it's already allowed libevent logging to be updated during runtime.
3. Add a description for category "all", "1", "none" and "0".
4. Add "optional" to the help text of <include> and <exclude>.
5. Add missing new lines before "Argument:".
6. This RPC always returns all logging categories with status.
Fix the help text to match this behavior.
c3055bb Add help-console command to Qt debug console (Luke Mlsna)
Pull request description:
This PR would close issue #9195 by adding documentation for the debug console features (mainly nested commands) which were added in [PR #7783](https://github.com/bitcoin/bitcoin/pull/7783).
The following changes were made to QT debug console code:
- Added a line to the initial message text at the top of the debug console:
> For more information on using this console type **help-console**.
- Added a pseudo-command `help-console` which is hooked after parsing the request, but before actually executing the RPC thread. It prints the following text to the console as if it were a valid RPC response.
> This console accepts RPC commands using the standard syntax.
> example: getblockhash 8
> This console can also accept RPC commands using bracketed syntax.
> example: getblockhash(8)
> A space or a comma can be used to separate arguments for either syntax.
> example: sendtoaddress \<address\> \<amount\>
> sendtoaddress,\<address\>,\<amount\>
> Commands may be nested when specified with the bracketed syntax.
> example: getblockinfo(getblockhash(0),true).
> Result values can be queried with a non-quoted string in brackets.
> example: getblock(getblockhash(0) true)[height]
This seemed like a reasonably sane way to introduce a fake RPC help command, but
Tree-SHA512: 35d73dcef9c4936b8be99e80978169f117c22b94f4400c91097bf7e0e1489060202dcd738d9debdf4c8a7bd10709e2c19d4f625f19e47c4a034f1d6019c0e0f2
49bd659 tests: move pwalletMain to wallet test fixture (Wladimir J. van der Laan)
Pull request description:
Scope the variable instead of using an external global; this is how test fixtures are intended to be used.
Followup to #11713.
Tree-SHA512: 7d5bda93cdfe1329c8fe39bd72965906e36dad72fbb5d344ebedf26e66b1857510d01a3c2872d7f718fdeb23365e6ba71991aafe68e82781c6767a086b6d1590
c1e5d40 Make debugging test crash easier (MeshCollider)
8263f6a Create walletdir if datadir doesn't exist and fix tests (MeshCollider)
9587a9c Default walletdir is wallets/ if it exists (MeshCollider)
d987889 Add release notes for -walletdir and wallets/ dir (MeshCollider)
80c5cbc Add test for -walletdir (MeshCollider)
0530ba0 Add -walletdir parameter to specify custom wallet dir (MeshCollider)
Pull request description:
Closes#11348
Adds a `-walletdir` parameter which specifies a directory to use for wallets, allowing them to be stored separately from the 'main' data directory. Creates a new `wallets/` directory in datadir if this is the first time running, and defaults to using it if it exists.
Includes tests and release notes. Things which might need to be considered more:
- there is no 'lock' on the wallets directory, which might be needed?
- because this uses a new wallets/ directory by default, downgrading to an earlier version won't see the wallets in that directory (not a big deal though, users can just copy them up to the main dir)
- jnewbery suggested putting each wallet in its own directory, which is a good idea, but out of scope for this PR IMO. EDIT: this is being done in https://github.com/bitcoin/bitcoin/pull/11687
- doc/files.md needs updating (will do soon)
I also considered including a cleanup by removing caching of data directory paths and instead just initialise them once on startup (c.f. #3073), but decided it wasn't super relevant here will just complicate review.
Tree-SHA512: c8ac04bfe9a810c32055f2c8b8fa0d535e56125ceb8d96f12447dd3538bf3e5ee992b60b1cd2173bf5f3fa023a9feab12c9963593bf27ed419df929bb413398d
f94c2ec Fix for mismatched extern definition in wallet test classes which was breaking msvc linking. (Aaron Clauson)
Pull request description:
The extern declarations are using a raw pointer which doesn't match the source variable's std::unqiue_ptr.
Tree-SHA512: 1500ffa1282ee6565741bf2f8f9def68a355346c8e4a667e1167d3d550eb0b732e8cba52fbef380a92c860e686d36da877d800ee5f2fc1e4dd8fd88fbe170644
Opt-in RBF checkbox uses less technical jargon and emphasises
the fee bump functionality (at the expense of not mentioning
other uses of RBF).
The transaction confirmation screen uses copy consistent with this.
dcfef27 cli: Reject arguments to -getinfo (Wladimir J. van der Laan)
Pull request description:
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trailing arguments are just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
Tree-SHA512: 3603e8fa852b884d1dd3b7462db40b092fe8b3390fd4384b4ee330315d797aff711e9f62990012fd4b5a55c8678734ba8497a5488a09ee6b65cf8a99017d6eb4
- Added `help-console` to the list of autocompletion strings
- Implemented requested changes to help message:
- Added an example that uses access-by-index `getblock(getblockhash(0) true)[tx][0]`
- Replace "bracketed syntax" to "parenthesized syntax" where applicable
- Replace "separate" with "delimit"
- Removed `<br>` and `<b>help/help-console</b>` from translation strings, since these parts don't change between languages
- Changed examples to be based off `getblock 0` so they will work even with pruned/no blockchain and `disablewallet` if copied and pasted
- Clarified syntax for queries of named/unnamed result objects.
ac1cf8d Trivial: Improve #endif comments (danra)
Pull request description:
Improve the #endif comments for the '#if HAVE_DECL_BSWAP_XX == 0' preprocessor conditions, so each shows the full condition which it closes.
Tree-SHA512: f533311fa48cb2f46f6490b6c965ad5f8861dcfad70c56d70e31fa989b422880c78b2dd6f24f648b19d3a22f767606e0de5cf1cb71445012b42c97ac2149295e
Currently it's possible to accidentally type e.g.
bitcoin-cli -getinfo getbalance
and get an answer which can be confusing; the trialing arguments are
just ignored.
To avoid this, throw an error if the user provides arguments to
`-getinfo`.
28f8b66 Diagnose unsuitable outputs in lockunspent(). (Eelis)
Pull request description:
Fixes#2667.
This is a simplified version of pull request #3574, which was abandoned by its author.
I added some tests as well.
Tree-SHA512: e63e00dec8b1b232079380183805cb0b0b18c78ea6bea769837949aab984689d7f68b2ccfe66b1873517b040b9e616ce0eb058575c3d4382aa8c26eebcf1f14e
069215e Initialize recently introduced non-static class member lastCycles to zero in constructor (practicalswift)
Pull request description:
Initialize recently introduced non-static class member `lastCycles` to zero in constructor.
`lastCycles` was introduced in 3532818746 which was merged into master yesterday.
Friendly ping @laanwj :-)
Tree-SHA512: cb93b6a8f6e2e3b06cd05a635da95c84f3df64c21fc23fe82f98306ea571badc32040315b563e46ddb5203128226bc334269acd497beead5a5777c434060fd85
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
aed1d90ac [wallet] Change feebumper from class to functions (Russell Yanofsky)
37bdcca3c [refactor] Make feebumper namespace (Russell Yanofsky)
7c4f00919 [trivial] Rename feebumper variables according to project code style (Russell Yanofsky)
Pull request description:
Make feebumper methods static and remove stored state in the class.
Having the results of feebumper calls persist in an object makes process
separation between Qt and wallet awkward, because it means the feebumper object
either has to be serialized back and forth between Qt and wallet processes
between fee bump calls, or that the feebumper object needs to stay alive in the
wallet process with an object reference passed back to Qt. It's simpler just to
have fee bumper calls return their results immediately instead of storing them
in an object with an extended lifetime.
In addition to making feebumper methods static, also:
- Move LOCK calls from Qt code to feebumper
- Move TransactionCanBeBumped implementation from Qt code to feebumper
- Rename CFeeBumper class to FeeBumper (every CFeeBumper reference had to be
updated in this PR anyway so this doesn't increase the size of the diff)
This change was originally part of https://github.com/bitcoin/bitcoin/pull/10244
Tree-SHA512: bf75e0c741b4e9c8912e66cc1dedf0ff715f77ea65fc33f7020d97d9099b0f6448f5852236dac63eea649de7d6fc03b0b21492e2c5140fb7560a39cf085506fd
89f0312 Remove redundant pwallet nullptr check (Matt Corallo)
c4784b5 Add a dev notes document describing the new wallet RPC blocking (Matt Corallo)
3ea8b75 Give ZMQ consistent order with UpdatedBlockTip on scheduler thread (Matt Corallo)
cb06edf Fix wallet RPC race by waiting for callbacks in sendrawtransaction (Matt Corallo)
e545ded Also call other wallet notify callbacks in scheduler thread (Matt Corallo)
17220d6 Use callbacks to cache whether wallet transactions are in mempool (Matt Corallo)
5d67a78 Add calls to CWallet::BlockUntilSyncedToCurrentChain() in RPCs (Matt Corallo)
5ee3172 Add CWallet::BlockUntilSyncedToCurrentChain() (Matt Corallo)
0b2f42d Add CallFunctionInQueue to wait on validation interface queue drain (Matt Corallo)
2b4b345 Add ability to assert a lock is not held in DEBUG_LOCKORDER (Matt Corallo)
0343676 Call TransactionRemovedFromMempool in the CScheduler thread (Matt Corallo)
a7d3936 Add a CValidationInterface::TransactionRemovedFromMempool (Matt Corallo)
Pull request description:
Based on #10179, this effectively reverts #9583, regaining most of the original speedups of #7946.
This concludes the work of #9725, #10178, and #10179.
See individual commit messages for more information.
Tree-SHA512: eead4809b0a75d1fb33b0765174ff52c972e45040635e38cf3686cef310859c1e6b3c00e7186cbd17374c6ae547bfbd6c1718fe36f26c76ba8a8b052d6ed7bc9
63c2d83 Explicitly state assumption that state.m_chain_sync.m_work_header != nullptr in ConsiderEviction (practicalswift)
Pull request description:
Explicitly state assumption that `state.m_chain_sync.m_work_header != nullptr` in `ConsiderEviction(…)`.
Static analyzer (and humans!) will see the null-check in ...
```
else if (state.m_chain_sync.m_timeout == 0 || (state.m_chain_sync.m_work_header != nullptr && ...
```
... and infer that `state.m_chain_sync.m_work_header` might be set to `nullptr` when reaching `else if (state.m_chain_sync.m_timeout > 0 && time_in_seconds > state.m_chain_sync.m_timeout)` and thus flag `state.m_chain_sync.m_work_header->GetBlockHash().ToString()` as a potential null pointer dereference.
This commit makes the tacit assumption of `state.m_chain_sync.m_work_header != nullptr` explicit.
Code introduced in 5a6d00c6de ("Permit disconnection of outbound peers on bad/slow chains") which was merged into master four days ago.
Friendly ping @sdaftuar :-)
Tree-SHA512: 32e5631025b7ba7556a02c89d040fbe339c482a03f28d0dbc9871c699e1f8ac867619b89c5fd41fdcfcf0dc4d7c859295b26ccd988572145cc244261aec18ce9
927f4ff5a GUI: Receive: Remove option to reuse a previous address (Luke Dashjr)
Pull request description:
This was justified by the need to "resent" an invoice, but now that we have the request history, that need should be gone.
Tree-SHA512: 4ade4eb84a21bbbd8dcc3a2c9580d416e113284b5bdf350c22051c233101fe0ee31659c54a7a46e7136f9c999acb61efbbb3f97aeb2fa7b2b1e1daec02ca0837
5e0ba8f8c [wallet] getreceivedbyaddress should return error if address is not mine (John Newbery)
ea0cd24f7 [tests] Tidy up receivedby.py (John Newbery)
Pull request description:
Two commits:
- First commit tidies up the `receivedby.py` test (and speeds it up by factor of two)
- Second commit changes getreceivedbyaddress to return error if the address is not found in wallet, and adds test to `receivedby.py`
Tree-SHA512: e41342dcbd037a6b440cbe4ecd3b8ed589e18e477333f0d866f3564e948e0f5231e497d5ffb66da4e6680eb772d9f0cf839125098bb68b92d04a5ee35c6c0a81
