8225239 Merge #433: Make the libcrypto detection fail the newer API.
12de863 Make the libcrypto detection fail the newer API.
2928420 Merge #427: Remove Schnorr from travis as well
8eecc4a Remove Schnorr from travis as well
a8abae7 Merge #310: Add exhaustive test for group functions on a low-order subgroup
b4ceedf Add exhaustive test for verification
83836a9 Add exhaustive tests for group arithmetic, signing, and ecmult on a small group
20b8877 Add exhaustive test for group functions on a low-order subgroup
80773a6 Merge #425: Remove Schnorr experiment
e06e878 Remove Schnorr experiment
04c8ef3 Merge #407: Modify parameter order of internal functions to match API parameter order
6e06696 Merge #411: Remove guarantees about memcmp-ability
40c8d7e Merge #421: Update scalar_4x64_impl.h
a922365 Merge #422: Restructure nonce clearing
3769783 Restructure nonce clearing
0f9e69d Restructure nonce clearing
9d67afa Update scalar_4x64_impl.h
7d15cd7 Merge #413: fix auto-enabled static precompuatation
00c5d2e fix auto-enabled static precompuatation
91219a1 Remove guarantees about memcmp-ability
353c1bf Fix secp256k1_ge_set_table_gej_var parameter order
541b783 Fix secp256k1_ge_set_all_gej_var parameter order
7d893f4 Fix secp256k1_fe_inv_all_var parameter order
git-subtree-dir: src/secp256k1
git-subtree-split: 8225239f490f79842a5a3b82ad6cc8aa11d5208e
1a6eacb [QA] add fundrawtransaction test on a locked wallet with empty keypool (Jonas Schnelli)
c24a4f5 [Wallet] Bugfix: FRT: don't terminate when keypool is empty (Jonas Schnelli)
f36349e qt: Remove on_toggleNetworkActiveButton_clicked from RPCConsole (Wladimir J. van der Laan)
297cc20 qt: layoutAboutToChange signal is called layoutAboutToBeChanged (Wladimir J. van der Laan)
This resolves an issue where a wallet transaction which failed to
relay previously because it couldn't make it into the mempool
will not try again until restart, even though mempool conditions
may have changed.
Abandoned and known-conflicted transactions are skipped.
Some concern was expressed that there may be users with many
unknown conflicts would waste a lot of CPU time trying to
add them to their memory pools over and over again. But I am
doubtful these users exist in any number, if they do exist
they have worse problems, and they can mitigate any performance
issue this might have by abandoning the transactions in question.
This is another violation of the one definition rule, as the type
for mapOrphanTransactionsByPrev did not match the one in
net_processing.cpp anymore. As it now depends on a custom Iterator,
it seems too much hassle to correctly expose it to the tests.
Instead, this commit just removes the one test it was referenced in.
Add more comprehensive unit tests for CCoinsViewCache. Right now it is hard to
refactor caching code or fix bugs in the caching logic because you have to try
to mentally enumerate all the different states the cache might be in to make
sure a change doesn't cause unintended consequences. The new tests explicitly
enumerate relevant cache states, documenting and verifying the behavior in each
state, so it will be safer and easier to make changes to the caching code in
the future.
dd0df81 Document ConnectBlock connectTrace postconditions (Matt Corallo)
2d6e561 Switch pblock in ProcessNewBlock to a shared_ptr (Matt Corallo)
2736c44 Make the optional pblock in ActivateBestChain a shared_ptr (Matt Corallo)
ae4db44 Create a shared_ptr for the block we're connecting in ActivateBCS (Matt Corallo)
fd9d890 Keep blocks as shared_ptrs, instead of copying txn in ConnectTip (Matt Corallo)
6fdd43b Add struct to track block-connect-time-generated info for callbacks (Matt Corallo)
81e3228 Make CTransaction actually immutable (Pieter Wuille)
42fd8de Make DecodeHexTx return a CMutableTransaction (Pieter Wuille)
c3f5673 Make CWalletTx store a CTransactionRef instead of inheriting (Pieter Wuille)
a188353 Switch GetTransaction to returning a CTransactionRef (Pieter Wuille)
042f9fa qt: Show progress overlay when clicking spinner icon (Wladimir J. van der Laan)
827d9a3 qt: Replace NetworkToggleStatusBarControl with generic ClickableLabel (Wladimir J. van der Laan)
76faa3c Rename the remaining main.{h,cpp} to validation.{h,cpp} (Matt Corallo)
e736772 Move network-msg-processing code out of main to its own file (Matt Corallo)
87c35f5 Remove orphan state wipe from UnloadBlockIndex. (Matt Corallo)
Sorry for the churn on this, but the current message (introduced in #9073)
isn't acceptable:
$ src/bitcoin-cli getinfo
rpc: couldn't connect to server
(make sure server is running and you are connecting to the correct RPC port: -1 unknown)
Putting the error code after the words "RPC port" made me wonder whether
there was a port configuration issue.
This changes it to:
$ src/bitcoin-cli getinfo
error: couldn't connect to server: unknown (code -1)
(make sure server is running and you are connecting to the correct RPC port)
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
2c8c57e Document cs_main status when calling into PNB or PNBH (Matt Corallo)
58a215c Use ProcessNewBlockHeaders in CMPCTBLOCK processing (Matt Corallo)
a8b936d Use exposed ProcessNewBlockHeaders from ProcessMessages (Matt Corallo)
63fd101 Split ::HEADERS processing into two separate cs_main locks (Matt Corallo)
4a6b1f3 Expose AcceptBlockHeader through main.h (Matt Corallo)
This was misnamed, resulting in a warning message and missing
functionality. I'm not sure what the change in behavior will be here,
this needs testing.
Also remove connection to non-existing slot "test".
This was used for testing if the signal arrived. It is no
longer necessary.
Fixes:
2016-12-01 10:04:06 GUI: QObject::connect: No such signal PeerTableModel::layoutAboutToChange() in qt/rpcconsole.cpp:518
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
2016-12-01 10:04:06 GUI: QObject::connect: No such slot RPCConsole::test() in qt/rpcconsole.cpp:781
2016-12-01 10:04:06 GUI: QObject::connect: (receiver name: 'RPCConsole')
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
Before daemonization, just probe the data directory lock and print an
early error message if possible.
After daemonization get the data directory lock again and hold on to it until exit
This creates a slight window for a race condition to happen, however this condition is harmless: it
will at most make us exit without printing a message to console.
$ src/bitcoind -testnet -daemon
Bitcoin server starting
$ src/bitcoind -testnet -daemon
Error: Cannot obtain a lock on data directory /home/orion/.bitcoin/testnet3. Bitcoin Core is probably already running.
When generating a new service key, explicitly request a RSA1024 one.
The bitcoin P2P protocol has no support for the longer hidden service names
that will come with ed25519 keys, until it does, we depend on the old
hidden service type so make this explicit.
See #9214.
Output instances of "BloomFilter" changed to "Bloom filter", in accordance with Wikipedia standard notation:
https://en.wikipedia.org/wiki/Bloom_filter
also to sync with the majority of cases in the self-same file
c7be56d net: push only raw data into CConnman (Cory Fields)
2ec935d net: add CVectorWriter and CNetMsgMaker (Cory Fields)
b7695c2 net: No need to check individually for disconnection anymore (Cory Fields)
fedea8a net: don't send any messages before handshake or after requested disconnect (Cory Fields)
d74e352 net: Set feelers to disconnect at the end of the version message (Cory Fields)
This fixes one of the last major layer violations in the networking stack.
The network side is no longer in charge of message serialization, so it is now
decoupled from Bitcoin structures. Only the header is serialized and attached
to the payload.
CVectorWriter is useful for overwriting or appending an existing byte vector.
CNetMsgMaker is a shortcut for creating messages on-the-fly which are suitable
for pushing to CConnman.
Bring up the modal progress overlay when the user clicks the spinner
icon in the task bar.
I think this is the intuitive thing to do when that icon is clicked.
ed998ea qt: Avoid OpenSSL certstore-related memory leak (Wladimir J. van der Laan)
5204598 qt: Avoid shutdownwindow-related memory leak (Wladimir J. van der Laan)
e4f126a qt: Avoid splash-screen related memory leak (Wladimir J. van der Laan)
693384e qt: Prevent thread/memory leak on exiting RPCConsole (Wladimir J. van der Laan)
47db075 qt: Plug many memory leaks (Wladimir J. van der Laan)
Also, send reject messages earlier in SendMessages(), so that disconnections are
processed earlier.
These changes combined should ensure that no message is ever sent after
fDisconnect is set.
This way we're not relying on messages going out after fDisconnect has been
set.
This should not cause any real behavioral changes, though feelers should
arguably disconnect earlier in the process. That can be addressed in a later
functional change.
d2b88f9 Move orphan-conflict removal from main logic into a callback (Matt Corallo)
97e2802 Erase orphans per-transaction instead of per-block (Matt Corallo)
ec4525c Move orphan processing to ActivateBestChain (Matt Corallo)
Make splash screen queue its own deletion when it receives the finished
command, instead of relying on WA_DeleteOnClose which doesn't work under
these circumstances.
Make ownership of the QThread object clear, so that the RPCConsole
can wait for the executor thread to quit before shutdown is called. This
increases overall thread safety, and prevents some objects from leaking
on exit.
None of these are very serious, and are leaks in objects that are
created at most one time.
In most cases this means properly using the QObject parent hierarchy,
except for BanTablePriv/PeerTablePriv which are not QObject,
so use a std::unique_ptr instead.
f004e67 Minor change to comment above new NODE_WITNESS service flag to keep it consitent with existing comment structure. Helps with readability. (Greg Walker)
Make sure that the count is a zero modulo the new mask before
scaling, otherwise the next time until a measure triggers
will take only 1/2 as long as accounted for. This caused
the 'min time' to be potentially off by as much as 100%.
When a BIP152 HB-mode peer is in the least preferred position and
disconnects, they will not be by ForNode on the next loop. They
will continue to sit in that position and prevent deactivating
HB mode for peers that are still connected.
There is no reason for them to stay in the list if already gone,
so drop the first element unconditionally if there are too many.
Fixes issue #9163.
037159c Remove block-request logic from INV message processing (Matt Corallo)
3451203 [qa] Respond to getheaders and do not assume a getdata on inv (Matt Corallo)
d768f15 [qa] Make comptool push blocks instead of relying on inv-fetch (mrbandrews)
- Do sorting for date, amount and confirmations column as longlong, not
unsigned longlong.
- Use `UserRole` to store our own data. This makes it treated as
ancillary data prevents it from being displayed.
- Get rid of `getMappedColumn` `strPad` - these are no longer necessary.
- Get rid of hidden `_INT64` columns.
- Start enumeration from 0 (otherwise values are undefined).
In 0.13 orphan transactions began being treated as implicit
INVs for their parents. But the resulting getdata were
not getting the witness flag.
This fixes issue #9182 reported by chjj and roasbeef on IRC.
Make a copy of the boost time-point to wait for, otherwise the head of
the queue may be deleted by another thread while this one is waiting,
while the boost function still has a reference to it.
Although this problem is in non-test code, this is not an actual problem
outside of the tests because we use the thread scheduler with only one
service thread, so there will never be threads fighting at the head of
the queue.
The old boost fallback escapes this problem because it passes a scalar
value to wait_until instead of a const object reference.
Found by running the tests in LLVM-4.0-master asan.
This further decouples "main" and "net" processing logic by moving
orphan processing out of the chain-connecting cs_main lock and
into its own cs_main lock, beside all of the other chain callbacks.
Once further decoupling of net and main processing logic occurs,
orphan handing should move to its own lock, out of cs_main.
Note that this will introduce a race if there are any cases where
we assume the orphan map to be consistent with the current chain
tip, however I am confident there is no such case (ATMP will fail
without DoS score in all such cases).
ae22357 Replace CValidationState param in ProcessNewBlock with BlockChecked (Matt Corallo)
7c98ce5 Remove pfrom parameter from ProcessNewBlock (Matt Corallo)
e2e069d Revert "RPC: Give more details when "generate" fails" (Matt Corallo)
dac53b5 Modify getblocktxn handler not to drop requests for old blocks (Russell Yanofsky)
55bfddc [qa] Fix stale data bug in test_compactblocks_not_at_tip (Russell Yanofsky)
47e9659 [qa] Fix bug in compactblocks v2 merge (Russell Yanofsky)
e2b3fb3 Optimize vInOutPoints insertion a bit (Matt Corallo)
eecffe5 Remove redundant duplicate-input check from CheckTransaction (Matt Corallo)
b2e178a Add deserialize + CheckBlock benchmarks, and a full block hex (Matt Corallo)
d59a518 Use fixed preallocation instead of costly GetSerializeSize (Pieter Wuille)
25a211a Add optimized CSizeComputer serializers (Pieter Wuille)
a2929a2 Make CSerAction's ForRead() constexpr (Pieter Wuille)
a603925 Avoid -Wshadow errors (Pieter Wuille)
5284721 Get rid of nType and nVersion (Pieter Wuille)
657e05a Make GetSerializeSize a wrapper on top of CSizeComputer (Pieter Wuille)
fad9b66 Make nType and nVersion private and sometimes const (Pieter Wuille)
c2c5d42 Make streams' read and write return void (Pieter Wuille)
50e8a9c Remove unused ReadVersion and WriteVersion (Pieter Wuille)
It is unexpected behavior for `ToString` to raise an exception. It
is expected to do a best-effort attempt at formatting but never fail.
Catch the exception and simply print unknown inv types as hexadecimal.
Fixes#9110.
4441018 Every main()/exit() should return/use one of EXIT_ codes instead of magic numbers (UdjinM6)
bd0de13 Fix exit codes: - `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error) - error reading config file should exit with `1` (UdjinM6)
d4833ff Bump the protocol version to distinguish new banning behavior. (Suhas Daftuar)
88c3549 Fix compact block handling to not ban if block is invalid (Suhas Daftuar)
c93beac [qa] Test that invalid compactblocks don't result in ban (Suhas Daftuar)
Dbwrapper used GetSerializeSize() to compute the size of the buffer
to preallocate. For some cases (specifically: CCoins) this requires
a costly compression call. Avoid this by just using fixed size
preallocations instead.
To get the advantages of faster GetSerializeSize() implementations
back that were removed in "Make GetSerializeSize a wrapper on top of
CSizeComputer", reintroduce them in the few places in the form of a
specialized Serialize() implementation. This actually gets us in a
better state than before, as these even get used when they're invoked
indirectly in the serialization of another object.
The CSerAction's ForRead() method does not depend on any runtime
data, so guarantee that requests to it can be optimized out by
making it constexpr.
Suggested by Cory Fields.
Remove the nType and nVersion as parameters to all serialization methods
and functions. There is only one place where it's read and has an impact
(in CAddress), and even there it does not impact any of the recursively
invoked serializers.
Instead, the few places that need nType or nVersion are changed to read
it directly from the stream object, through GetType() and GetVersion()
methods which are added to all stream classes.
Given that in default GetSerializeSize implementations created by
ADD_SERIALIZE_METHODS we're already using CSizeComputer(), get rid
of the specialized GetSerializeSize methods everywhere, and just use
CSizeComputer. This removes a lot of code which isn't actually used
anywhere.
For CCompactSize and CVarInt this actually removes a more efficient
size computing algorithm, which is brought back in a later commit.
The current getblocktxn implementation drops and ignores requests for old
blocks, which causes occasional sync_block timeouts during the
p2p-compactblocks.py test as reported in
https://github.com/bitcoin/bitcoin/issues/8842.
The p2p-compactblocks.py test setup creates many new blocks in a short
period of time, which can lead to getblocktxn requests for blocks below the
hardcoded depth limit of 10 blocks. This commit changes the getblocktxn
handler not to ignore these requests, so the peer nodes in the test setup
will reliably be able to sync.
The protocol change is documented in BIP-152 update "Allow block responses
to getblocktxn requests" at https://github.com/bitcoin/bips/pull/469.
The protocol change is not expected to affect nodes running outside the test
environment, because there shouldn't normally be lots of new blocks being
rapidly added that need to be synced.
The stream implementations had two cascading layers (the upper one
with operator<< and operator>>, and a lower one with read and write).
The lower layer's functions are never cascaded (nor should they, as
they should only be used from the higher layer), so make them return
void instead.
9027680 net: handle version push in InitializeNode (Cory Fields)
7588b85 net: construct CNodeStates in place (Cory Fields)
440f1d3 net: remove now-unused ssSend and Fuzz (Cory Fields)
5c2169c drop the optimistic write counter hack (Cory Fields)
ea33268 net: switch all callers to connman for pushing messages (Cory Fields)
3e32cd0 connman is in charge of pushing messages (Cory Fields)
b98c14c serialization: teach serializers variadics (Cory Fields)
Three categories of modifications:
1)
1 instance of 'The Bitcoin Core developers \n',
1 instance of 'the Bitcoin Core developers\n',
3 instances of 'Bitcoin Core Developers\n', and
12 instances of 'The Bitcoin developers\n'
are made uniform with the 443 instances of 'The Bitcoin Core developers\n'
2)
3 instances of 'BitPay, Inc\.\n' are made uniform with the other 6
instances of 'BitPay Inc\.\n'
3)
4 instances where there was no '(c)' between the 'Copyright' and the year
where it deviates from the style of the local directory.
- `--help`, `--version` etc should exit with `0` i.e. no error ("not enough args" case should still trigger an error)
- error reading config file should exit with `1`
Slightly refactor AppInitRPC/AppInitRawTx to return standard exit codes (EXIT_FAILURE/EXIT_SUCCESS) or CONTINUE_EXECUTION (-1)
The changes here are dense and subtle, but hopefully all is more explicit
than before.
- CConnman is now in charge of sending data rather than the nodes themselves.
This is necessary because many decisions need to be made with all nodes in
mind, and a model that requires the nodes calling up to their manager quickly
turns to spaghetti.
- The per-node-serializer (ssSend) has been replaced with a (quasi-)const
send-version. Since the send version for serialization can only change once
per connection, we now explicitly tag messages with INIT_PROTO_VERSION if
they are sent before the handshake. With this done, there's no need to lock
for access to nSendVersion.
Also, a new stream is used for each message, so there's no need to lock
during the serialization process.
- This takes care of accounting for optimistic sends, so the
nOptimisticBytesWritten hack can be removed.
- -dropmessagestest and -fuzzmessagestest have not been preserved, as I suspect
they haven't been used in years.
This allows future software that would relay compact blocks before
full validation to announce only to peers that will not ban if the
block turns out to be invalid.
f5b960b Move nTimeBestReceived updating into net processing code (Matt Corallo)
d8670fb Move all calls to CheckBlockIndex out of net-processing logic (Matt Corallo)
d6ea737 Remove network state wipe from UnloadBlockIndex. (Matt Corallo)
fc0c24f Move MarkBlockAsReceived out of ProcessNewMessage (Matt Corallo)
65f35eb Move FlushStateToDisk call out of ProcessMessages::TX into ATMP (Matt Corallo)
59ac5c5 net: Use deterministic randomness for CNode's nonce, and make it const (Cory Fields)
aff6584 net: constify a few CNode vars to indicate that they're threadsafe (Cory Fields)
Check for unreasonable alloc size in LockedPool rather than lancing through new
Arenas until we improbably find one worthy of the quixotic request or the system
can support no more Arenas.
- Use the python standard logging library
- Run all tests and report all failing test-cases (rather than stop after one test case fails)
- If output is different from expected output, log a contextual diff.
Refer to the right file in the top-level README.md.
Having only one file with test documentation saves some confusion about
where things are documented.
444c673 bench: Add benchmark for lockedpool allocation/deallocation (Wladimir J. van der Laan)
6567999 rpc: Add `getmemoryinfo` call (Wladimir J. van der Laan)
4536148 support: Add LockedPool (Wladimir J. van der Laan)
f4d1fc2 wallet: Get rid of LockObject and UnlockObject calls in key.h (Wladimir J. van der Laan)
999e4c9 wallet: Change CCrypter to use vectors with secure allocator (Wladimir J. van der Laan)
GetTotalBlocksEstimate is no longer used and it was the only thing
the checkpoint tests were testing.
Since checkpoints are on their way out it makes more sense to remove
the test file than to cook up a new pointless test.
This introduces a 'minimum chain work' chainparam which is intended
to be the known amount of work in the chain for the network at the
time of software release. If you don't have this much work, you're
not yet caught up.
This is used instead of the count of blocks test from checkpoints.
This criteria is trivial to keep updated as there is no element of
subjectivity, trust, or position dependence to it. It is also a more
reliable metric of sync status than a block count.
Fixes newly initialized bloom filters being
constructed with isEmpty(false), which still
works but loses the possible speedup when
checking for key membership in an empty filter.
This will result in many more calls to CheckBlockIndex when
connecting a list of headers (eg in ::HEADERS messages processing)
but its only enabled in debug mode, and that should mostly just be
during IBD, so it should be OK.
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
This splits the output comparison for `bitcoin-tx` into two steps:
- First, check for data mismatch, parsing the data as json or hex
depending on the extension of the output file
- Then, check if the literal string matches
For either of these cases give a different error.
This prevents wild goose chases when e.g. a trailing space doesn't match
exactly, and makes sure that both test output and examples are valid
data of the purported format.
Recent discussion (in IRC meetings, and e.g. #8989) has shown a
preference for the default confirm target for smartfees to be 6 instead
of 2, to avoid overpaying fees for questionable gain.
6 is also a compromise between the GUI's pre-#8989 value of 25 and the
bitcoind `-txconfirmtarget` default of 2. These were unified in #8989,
but this has made the (overly expensive) default of 2 as GUI default.
```
getmemoryinfo
Returns an object containing information about memory usage.
Result:
{
"locked": { (json object) Information about locked memory manager
"used": xxxxx, (numeric) Number of bytes used
"free": xxxxx, (numeric) Number of bytes available in current arenas
"total": xxxxxxx, (numeric) Total number of bytes managed
"locked": xxxxxx, (numeric) Amount of bytes that succeeded locking. If this number is smaller than total, locking pages failed at some point and key data could be swapped to disk.
}
}
Examples:
> bitcoin-cli getmemoryinfo
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getmemoryinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
```
Add a pool for locked memory chunks, replacing LockedPageManager.
This is something I've been wanting to do for a long time. The current
approach of locking objects where they happen to be on the stack or heap
in-place causes a lot of mlock/munlock system call overhead, slowing
down any handling of keys.
Also locked memory is a limited resource on many operating systems (and
using a lot of it bogs down the system), so the previous approach of
locking every page that may contain any key information (but also other
information) is wasteful.
This change is needed to prevent sync_blocks timeouts in the mempool_reorg
test after the sync_blocks update in the upcoming commit
"[qa] Change sync_blocks to pick smarter maxheight".
This change was initially suggested by Suhas Daftuar <sdaftuar@chaincode.com>
in https://github.com/bitcoin/bitcoin/pull/8680#r78209060
0334430 Add some missing includes (Pieter Wuille)
4100499 Return shared_ptr<CTransaction> from mempool removes (Pieter Wuille)
51f2783 Make removed and conflicted arguments optional to remove (Pieter Wuille)
f48211b Bypass removeRecursive in removeForReorg (Pieter Wuille)
nMaxInbound might very well be 0 or -1, if the user prefers to keep
a small number of maxconnections.
Note: nMaxInbound of -1 means that the user set maxconnections
to 8 or less, but we still want to keep an additional slot for
the feeler connection.
Add getNetworkActive()/setNetworkActive() method to client model.
Send network active status through NotifyNetworkActiveChanged.
Indicate in tool tip of gui status bar network indicator whether network activity is disabled.
Indicate in debug window whether network activity is disabled and add button to allow user to toggle network activity state.
Added the function SetNetworkActive() which when called with argument set to false disconnects all nodes and sets the flag fNetworkActive to false. As long as this flag is false no new connections are attempted and no incoming connections are accepted. Network activity is reenabled by calling the function with argument true.
Note that this is not a major issue as, in order for the missing
lock to cause issues, you have to receive a GETBLOCKTXN message
while reindexing, adding a block header via RPC, etc, which results
in either a table rehash or an insert into the bucket which you are
currently looking at.
3154d6e [Qt] use NotifyHeaderTip's height and date for the progress update (Jonas Schnelli)
0a261b6 Use pindexBestHeader instead of setBlockIndexCandidates for NotifyHeaderTip() (Jonas Schnelli)
Makes it an error to use flags that have not been defined
on the libconsensus API.
There has been some confusion as to what pass to libconsensus, and
(combined with mention in the release notes) this should clear it up.
Using undocumented flags is a risk because their meaning,
and what combinations are allowed, changes from release to release.
E.g. it is no longer possible to pass (CLEANSTACK | P2SH) without
running into an assertion after the segwit changes.
There were discrepancies between usage of "block chain" and "blockchain", I've changed them to the latter. The reason for this was that Wikipedia when describing this data structure writes "A blockchain — *originally block chain*", so it seemed the more appropriate term.
178cd88 Qt/splash: Specifically keep track of which wallet(s) we are connected to for later disconnecting (Luke Dashjr)
1880aeb Qt: Get the private key for signing messages via WalletModel (Luke Dashjr)
Replace these with vectors allocated from the secure allocator.
This avoids mlock syscall churn on stack pages, as well as makes
it possible to get rid of these functions.
Please review this commit and the previous one carefully that
no `sizeof(vectortype)` remains in the memcpys and memcmps usage
(ick!), and `.data()` or `&vec[x]` is used as appropriate instead of
&vec.
Change CCrypter to use vectors with secure allocator instead of buffers
on in the object itself which will end up on the stack. This avoids
having to call LockedPageManager to lock stack memory pages to prevent the
memory from being swapped to disk. This is wasteful.
4630479 Make dnsseed's definition of acute need include relevant services. (Gregory Maxwell)
9583477 Be more aggressive in connecting to peers with relevant services. (Gregory Maxwell)
We normally prefer to connect to peers offering the relevant services.
If we're not connected to enough peers with relevant services, we
probably don't know about them and could use dnsseed's help.
a9aec5c Use BlockChecked signal to send reject messages from mapBlockSource (Matt Corallo)
7565e03 Remove SyncWithWallets wrapper function (Matt Corallo)
12ee1fe Always call UpdatedBlockTip, even if blocks were only disconnected (Matt Corallo)
f5efa28 Remove CConnman parameter from ProcessNewBlock/ActivateBestChain (Matt Corallo)
fef1010 Use CValidationInterface from chain logic to notify peer logic (Matt Corallo)
aefcb7b Move net-processing logic definitions together in main.h (Matt Corallo)
0278fb5 Remove duplicate nBlocksEstimate cmp (we already checked IsIBD()) (Matt Corallo)
87e7d72 Make validationinterface.UpdatedBlockTip more verbose (Matt Corallo)
The new benchmarks exercise script validation, CCoinsDBView caching,
mempool eviction, and wallet coin selection code.
All of the benchmarks added here are extremely simple and don't
necessarily mirror common real world conditions or interesting
performance edge cases. Details about how specific benchmarks can be
improved are noted in comments.
Github-Issue: #7883
3ac6de0 Align constant names for maximum compact block / blocktxn depth (Pieter Wuille)
b2e93a3 Add cmpctblock to debug help list (instagibbs)
fe998e9 More agressively filter compact block requests (Matt Corallo)
02a337d Dont remove a "preferred" cmpctblock peer if they provide a block (Matt Corallo)
Only allow skipping relevant services until there are four outbound
connections up.
This avoids quickly filling up with peers lacking the relevant
services when addrman has few or none of them.
67d6ee1 remove redundant tests in p2p-segwit.py (Johnson Lau)
9260085 test segwit uncompressed key fixes (Johnson Lau)
248f3a7 Fix ismine and addwitnessaddress: no uncompressed keys in segwit (Pieter Wuille)
b811124 [qa] Add tests for uncompressed pubkeys in segwit (Suhas Daftuar)
9f0397a Make test framework produce lowS signatures (Johnson Lau)
4c0c25a Require compressed keys in segwit as policy and disable signing with uncompressed keys for segwit scripts (Johnson Lau)
3ade2f6 Add standard limits for P2WSH with tests (Johnson Lau)
There are only a few uses of `insecure_random` outside the tests.
This PR replaces uses of insecure_random (and its accompanying global
state) in the core code with an FastRandomContext that is automatically
seeded on creation.
This is meant to be used for inner loops. The FastRandomContext
can be in the outer scope, or the class itself, then rand32() is used
inside the loop. Useful e.g. for pushing addresses in CNode or the fee
rounding, or randomization for coin selection.
As a context is created per purpose, thus it gets rid of
cross-thread unprotected shared usage of a single set of globals, this
should also get rid of the potential race conditions.
- I'd say TxMempool::check is not called enough to warrant using a special
fast random context, this is switched to GetRand() (open for
discussion...)
- The use of `insecure_rand` in ConnectThroughProxy has been replaced by
an atomic integer counter. The only goal here is to have a different
credentials pair for each connection to go on a different Tor circuit,
it does not need to be random nor unpredictable.
- To avoid having a FastRandomContext on every CNode, the context is
passed into PushAddress as appropriate.
There remains an insecure_random for test usage in `test_random.h`.
1df3111 protocol.h: Make enums in GetDataMsg concrete values (Wladimir J. van der Laan)
2c09a52 protocol.h: Move MESSAGE_START_SIZE into CMessageHeader (Wladimir J. van der Laan)
f9bd92d version.h: s/shord/short/ in comment (Wladimir J. van der Laan)
27acfc1 [qa] Update p2p-compactblocks.py for compactblocks v2 (Suhas Daftuar)
422fac6 [qa] Add support for compactblocks v2 to mininode (Suhas Daftuar)
f5b9b8f [qa] Fix bug in mininode witness deserialization (Suhas Daftuar)
6aa28ab Use cmpctblock type 2 for segwit-enabled transfer (Pieter Wuille)
be7555f Fix overly-prescriptive p2p-segwit test for new fetch logic (Matt Corallo)
06128da Make GetFetchFlags always request witness objects from witness peers (Matt Corallo)
This concretizes the numbers and adds a comment to make it clear that
these numbers are fixed by the protocol, and may avoid people forgetting
to claim numbers in the future (e.g. issue #8500).
Also gets rid of a weird unused `MSG_TYPE_MAX` in the middle of the
enumeration (thanks @paveljanik for noticing).
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
This fixes a bug where we might (in exceedingly rare circumstances)
accidentally ban a node for sending us the first (potentially few)
segwit blocks in non-segwit mode.
* Minor formatting such as adjusting links
* Move sections of `doc/multiwallet-qt.md` to the source code and delete
the file, as it is outdated
* Fix typo in the release notes
* Amend release process to mention update of BLOCK_CHAIN_SIZE
f00705a serialize: Deprecate `begin_ptr` / `end_ptr` (Wladimir J. van der Laan)
47314e6 prevector: add C++11-like data() method (Wladimir J. van der Laan)
Implement `begin_ptr` and `end_ptr` in terms of C++11 code,
and add a comment that they are deprecated.
Follow-up to developer notes update in 654a211622.
75ead758 turned these into crashes in the event of a handshake failure, most
notably when a peer does not offer the expected services.
There are likely other cases that these assertions will find as well.
Base64 contains '/', and the '/' character in credentials is problematic
for AuthServiceProxy which represents the RPC endpoint as an URI with
user and password embedded.
Closes#8399.
305087b net: Hardcode protocol sizes and use fixed-size types (Wladimir J. van der Laan)
41e58fa net: Consistent checksum handling (Wladimir J. van der Laan)
0c4e6ce Add MIT license to build-aux/m4 scripts (Luke Dashjr)
3f8a5d8 Trivial: build-aux/m4/l_atomic: Fix typo (Luke Dashjr)
3b4b6dc Add MIT license to autogen.sh and share/genbuild.sh (Luke Dashjr)
f4dffdd Add MIT license to Makefiles (Luke Dashjr)
In principle, the checksums of P2P packets are simply 4-byte blobs which
are the first four bytes of SHA256(SHA256(payload)).
Currently they are handled as little-endian 32-bit integers half of the
time, as blobs the other half, sometimes copying the one to the other,
resulting in somewhat confused code.
This PR changes the handling to be consistent both at packet creation
and receiving, making it (I think) easier to understand.
Simplified version of #8278. Assumes that every OS that (a) is supported
by Bitcoin Core (b) supports daemonization has the `daemon()` function
in its C library.
- Removes the fallback path for operating systems that support
daemonization but not `daemon()`. This prevents never-exercised code from
ending up in the repository (see discussion here:
https://github.com/bitcoin/bitcoin/pull/8278#issuecomment-242704745).
- Removes the windows-specific path. Windows doesn't support `daemon()`,
so it don't support daemonization there, automatically.
Original code by Matthew King, adapted by Wladimir van der Laan.
08827df [Qt] modalinfolayer: removed unused comments, renamed signal, code style overhaul (Jonas Schnelli)
d8b062e [Qt] only update "amount of blocks left" when the header chain is in-sync (Jonas Schnelli)
e3245b4 [Qt] add out-of-sync modal info layer (Jonas Schnelli)
e47052f [Qt] ClientModel add method to get the height of the header chain (Jonas Schnelli)
a001f18 [Qt] Always pass the numBlocksChanged signal for headers tip changed (Jonas Schnelli)
bd44a04 [Qt] make Out-Of-Sync warning icon clickable (Jonas Schnelli)
0904c3c [Refactor] refactor function that forms human readable text out of a timeoffset (Jonas Schnelli)
2ca6b9d Remove last reference to CWalletDB from accounting_tests.cpp (Patrick Strateman)
02e2a81 Remove pwalletdb parameter from CWallet::AddAccountingEntry (Patrick Strateman)
d2e678d Add CWallet::ReorderTransactions and use in accounting_tests.cpp (Patrick Strateman)
59adc86 Add CWallet::ListAccountCreditDebit (Patrick Strateman)
After #8594 the addrFrom sent by a node is not used anymore at all,
so don't bother sending it.
Also mitigates the privacy issue in (#8616). It doesn't completely solve
the issue as GetLocalAddress is also called in AdvertiseLocal, but at
least when advertising addresses it stands out less as *our* address.
This was broken by 63cafa6329.
Note that while this fixes the settings, it doesn't fix the actual usage of
-maxuploadtarget completely, as there is currently a bug in the
nOptimisticBytesWritten accounting that causes a delayed response if the target
is reached. That bug will be addressed separately.
In the case of (for example) an already-running bitcoind, the shutdown sequence
begins before CConnman has been created, leading to a null-pointer dereference
when g_connman->Stop() is called.
Instead, Just let the CConnman dtor take care of stopping.
86726d8 Rename `-optintofullrbf` option to `-walletrbf` (Wladimir J. van der Laan)
05fa823 wallet: Add BIP125 comment for MAXINT-1/-2 behavior (Wladimir J. van der Laan)
152f45b Add option to opt into full-RBF when sending funds (Peter Todd)
An example of where this might be useful is allowing a node to connect blocksonly during IBD but then becoming a full-node once caught up with the latest block. This might also even want to be the default behaviour since during IBD most TXs appear to be orphans, and are routinely dropped (for example when a node disconnects). Therefore, this can waste a lot of bandwidth.
Additionally, another pull could be written to stop relaying of TXs to nodes that are clearly far behind the latest block and are running a node that doesn't store many orphan TXs, such as recent versions of Bitcoin Core.
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
waitfornewblock waits until a new block is received, or the timeout expires, then
returns the current block height/hash.
waitforblock waits for a specific blockhash, or until the timeout expires, then
returns the current block height/hash. If the target blockhash is the current
tip, it will return immediately.
waitforblockheight waits until the tip has reached a certain height or higher,
then returns the current height and hash.
waitforblockheight is used to avoid polling in the rpc tests.
35fe039 Rename to PrecomputedTransactionData (Pieter Wuille)
ab48c5e Unit test for sighash caching (Nicolas DORIER)
d2c5d04 Precompute sighashes (Pieter Wuille)
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
We should learn about new peers via address messages.
An inbound peer connecting to us tells us nothing about
its ability to accept incoming connections from us, so
we shouldn't assume that we can connect to it based on
this.
The vast majority of nodes on the network do not accept
incoming connections, adding them will only slow down
the process of making a successful connection in the
future.
Nodes which have configured themselves to not announce would prefer we
not violate their privacy by announcing them in GETADDR responses.
Tests if addresses are online or offline by briefly connecting to them. These short lived connections are referred to as feeler connections. Feeler connections are designed to increase the number of fresh online addresses in tried by selecting and connecting to addresses in new. One feeler connection is attempted on average once every two minutes.
This change was suggested as Countermeasure 4 in
Eclipse Attacks on Bitcoin’s Peer-to-Peer Network, Ethan Heilman,
Alison Kendler, Aviv Zohar, Sharon Goldberg. ePrint Archive Report
2015/263. March 2015.
Commands can be executed with bracket syntax, example: `getwalletinfo()`.
Commands can be nested, example: `sendtoaddress(getnewaddress(), 10)`.
Simple queries are possible: `listunspent()[0][txid]`
Object values are accessed with a non-quoted string, example: [txid].
Fully backward compatible.
`generate 101` is identical to `generate(101)`
Result value queries indicated with `[]` require the new brackets syntax.
Comma as argument separator is now also possible: `sendtoaddress,<address>,<amount>`
Space as argument separator works also with the bracket syntax, example: `sendtoaddress(getnewaddress() 10)
No dept limitation, complex commands are possible:
`decoderawtransaction(getrawtransaction(getblock(getbestblockhash())[tx][0]))[vout][0][value]`
Remove the unused variable "blockTmp" in CMerkleTx::SetMerkleBranch. It
was previously used to read the block from disk if not provided as
argument, but is no longer needed.
The `pickDataDirectory()` function was calling `exit(0)` to quit
the application when the user closes the dialog without choosing
a data directory.
This is a bad idea because a background thread is created (to
check free space on the drive of the currently selected datadir).
The thread is not stopped and unwound properly, resulting in a potential
race condition somewhere deep in Qt.
So replace the `exit()` by a boolean return value, and let the
stack unwind normally.
7a49cac Merge #410: Add string.h include to ecmult_impl
0bbd5d4 Add string.h include to ecmult_impl
c5b32e1 Merge #405: Make secp256k1_fe_sqrt constant time
926836a Make secp256k1_fe_sqrt constant time
e2a8e92 Merge #404: Replace 3M + 4S doubling formula with 2M + 5S one
8ec49d8 Add note about 2M + 5S doubling formula
5a91bd7 Merge #400: A couple minor cleanups
ac01378 build: add -DSECP256K1_BUILD to benchmark_internal build flags
a6c6f99 Remove a bunch of unused stdlib #includes
65285a6 Merge #403: configure: add flag to disable OpenSSL tests
a9b2a5d configure: add flag to disable OpenSSL tests
b340123 Merge #402: Add support for testing quadratic residues
e6e9805 Add function for testing quadratic residue field/group elements.
efd953a Add Jacobi symbol test via GMP
fa36a0d Merge #401: ecmult_const: unify endomorphism and non-endomorphism skew cases
c6191fd ecmult_const: unify endomorphism and non-endomorphism skew cases
0b3e618 Merge #378: .gitignore build-aux cleanup
6042217 Merge #384: JNI: align shared files copyright/comments to bitcoinj's
24ad20f Merge #399: build: verify that the native compiler works for static precomp
b3be852 Merge #398: Test whether ECDH and Schnorr are enabled for JNI
aa0b1fd build: verify that the native compiler works for static precomp
eee808d Test whether ECDH and Schnorr are enabled for JNI
7b0fb18 Merge #366: ARM assembly implementation of field_10x26 inner (rebase of #173)
001f176 ARM assembly implementation of field_10x26 inner
0172be9 Merge #397: Small fixes for sha256
3f8b78e Fix undefs in hash_impl.h
2ab4695 Fix state size in sha256 struct
6875b01 Merge #386: Add some missing `VERIFY_CHECK(ctx != NULL)`
2c52b5d Merge #389: Cast pointers through uintptr_t under JNI
43097a4 Merge #390: Update bitcoin-core GitHub links
31c9c12 Merge #391: JNI: Only call ecdsa_verify if its inputs parsed correctly
1cb2302 Merge #392: Add testcase which hits additional branch in secp256k1_scalar_sqr
d2ee340 Merge #388: bench_ecdh: fix call to secp256k1_context_create
093a497 Add testcase which hits additional branch in secp256k1_scalar_sqr
a40c701 JNI: Only call ecdsa_verify if its inputs parsed correctly
faa2a11 Update bitcoin-core GitHub links
47b9e78 Cast pointers through uintptr_t under JNI
f36f9c6 bench_ecdh: fix call to secp256k1_context_create
bcc4881 Add some missing `VERIFY_CHECK(ctx != NULL)` for functions that use `ARG_CHECK`
6ceea2c align shared files copyright/comments to bitcoinj's
70141a8 Update .gitignore
7b549b1 Merge #373: build: fix x86_64 asm detection for some compilers
bc7c93c Merge #374: Add note about y=0 being possible on one of the sextic twists
e457018 Merge #364: JNI rebased
86e2d07 JNI library: cleanup, removed unimplemented code
3093576a JNI library
bd2895f Merge pull request #371
e72e93a Add note about y=0 being possible on one of the sextic twists
3f8fdfb build: fix x86_64 asm detection for some compilers
e5a9047 [Trivial] Remove double semicolons
c18b869 Merge pull request #360
3026daa Merge pull request #302
03d4611 Add sage verification script for the group laws
a965937 Merge pull request #361
83221ec Add experimental features to configure
5d4c5a3 Prevent damage_array in the signature test from going out of bounds.
419bf7f Merge pull request #356
03d84a4 Benchmark against OpenSSL verification
git-subtree-dir: src/secp256k1
git-subtree-split: 7a49cacd3937311fcb1cb36b6ba3336fca811991
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
c784086 use std::map::emplace() instead of std::map::insert() (whythat)
5e187e7 use c++11 std::unique_ptr instead of boost::shared_ptr (whythat)
947913f use std::map::erase(const_iterator, const_iterator) to get non-constant iterator (whythat)
239cbd2 qa/rpc-tests/segwit: Test GBT sigops before and after activation (Luke Dashjr)
160f895 Bugfix: Use pre-BIP141 sigops until segwit activates (Luke Dashjr)
refs #8225
To ensure the GUI closes when the "Minimize on close" window option is disabled, and the "Minimize to the tray instead of the taskbar" window option is enbaled, remove a check made against the "Minimize to the tray instead of the taskbar" value, made during GUI closure.
To ensure the GUI minimizes to the taskbar when the "Minimize on close" window option is enabled, and the "Minimize to the tray instead of the taskbar" window option is disabled, minimize the GUI and ignore the closure event.
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
Updating documentation for adding new unit test files
Removing unneeded sentence from README
Removing uint160_tests.cpp as it DNE
Formatting command line instructions to use ``
fixing 80 char formatting issue in README
fixing more nits
a5072a7 util: Remove zero-argument versions of LogPrint and error (Wladimir J. van der Laan)
695041e util: Update tinyformat (Wladimir J. van der Laan)
7e87033 httpserver: replace boost threads with std (Cory Fields)
d3773ca httpserver: explicitly detach worker threads (Cory Fields)
755aa05 httpserver: use a future rather than relying on boost's try_join_for (Cory Fields)
along with mutex/condvar/bind/etc.
httpserver handles its own interruption, so there's no reason not to use std
threading.
While we're at it, may as well kill the BOOST_FOREACH's as well.
Forward-ports two commits from 0.13:
- [0.13] Create a new HD seed after encrypting the wallet
- [Wallet] Add CKeyMetadata record for HDMasterKey(s), factor out HD key generation
Github-Pull: #8389
Rebased-From: f142c11ac634df487cc4bc65a5f1c9a3e3563dd9 de45c065f0648c4c41b57cb492420ceeed29dd11
c59c434 qa: Add test for standardness of segwit v0 outputs (Suhas Daftuar)
1ffaff2 Make witness v0 outputs non-standard before segwit activation (Johnson Lau)
7945088 [Wallet] comsetic non-code changes for the HD feature (Jonas Schnelli)
68d7682 [Wallet] ensure CKeyMetadata.hdMasterKeyID will be cleared during SetNull() (Jonas Schnelli)
f708085 [QA] extend wallet-hd test to cover HD metadata (Jonas Schnelli)
986c223 [Wallet] print hd masterkeyid in getwalletinfo (Jonas Schnelli)
b1c7b24 [Wallet] report optional HDKeypath/HDMasterKeyId in validateaddress (Jonas Schnelli)
5b95dd2 [Wallet] extend CKeyMetadata with HD keypath (Jonas Schnelli)
46c9620 Test that unnecessary witnesses can't be used for mempool DoS (Suhas Daftuar)
bb66a11 Fix DoS vulnerability in mempool acceptance (Suhas Daftuar)
When processing a headers message that looks like a block announcement,
send peer a getheaders if the headers message won't connect.
Apply DoS points after too many consecutive unconnecting headers messages.
Moves the IsStandard check to happen after the premature-witness check,
so that adding a witness to a transaction can't prevent mempool acceptance.
Note that this doesn't address the broader category of potential mempool DoS
issues that affect transactions after segwit activation.
Also cap the allocation for the leveldb-specific cache for the UTXO set
to 8MiB.
This avoids that the extra cache memory goes to the much less effective
leveldb cache instead of our application-level cache.
This reverts PR #4906, "Coinselection prunes extraneous inputs from
ApproximateBestSubset".
Apparently the previous behavior of slightly over-estimating the set of
inputs was useful in cleaning up UTXOs.
See also #7664, #7657, as well as 2016-07-01 discussion on #bitcoin-core-dev IRC.
Generate an (invalid) example address for in the bitcoin address
widgets, based on the network prefix, instead of hardcoding a mainnet
address.
- `1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L` for mainnet (same as now)
- `n2wxQmfexkjwEPgdD6iJA7T7RtzkmHxhFc` for testnet
Changes in tinyformat, recently imported from upstream have made the
zero-argument versions of formatting functions unnecessary. Remove them.
This is a slight semantic change: `%` characters in the zero-argument
call are now regarded and need to be escaped. As for as I know, the only
use of this is in `main.cpp`.
Updates `tinyformat.h` to commit
3a33bbf654 upstream.
Makes sure that our local changes are kept:
- #37671b8fd35aad Make tinyformat errors raise an exception instead of assert()ing
- #47359b6d4c5cdc Move strprintf define to tinyformat.h
- #47486e5fd003e0 include stdexcept (for std::exception)
- #80009eaa0afa6e force USE_VARIADIC_TEMPLATES
- Add `std::string format(const std::string &fmt...` added this
at the time, as we want to be able to do `strprintf(_(...), ...)`
Inspired by #8264.
mininode now supports witness transactions/blocks, blocktools
has a helper for adding witness commitments to blocks, and script
has a function to calculate hashes for signature under sigversion
1, used by segwit.
Py3 conversion by Marco Falke
Test to make sure upgraded nodes don't ask for non-wit blocks by
Gregory Sanders.
