869193f5a6 docs: fixed bitcoin-cli -help output for help2man (Hennadii Stepanov)
Pull request description:
Currently `bitcon-cli -help` output forces help2man to produce `.TP` and `.IP` commands instead of a single `.IP` command for `-stdinrpcpass` option.
Removing an extra space fixes this issue.
This pull request is rebased from #13879
Tree-SHA512: 1c5b25ed2ef7b7de42bc6210165bdbabe63f045699487f2db4790e0d3176f6493dfd3e8e19f4ddc38b551539465d7b41aea570f20dccbc0609f00fdfee1b5180
4b7091a842 Replace median fee rate with feerate percentiles (Marcin Jachymiak)
Pull request description:
Currently, the `medianfeerate` statistic is calculated from the feerate of the middle transaction of a list of transactions sorted by feerate.
This PR instead uses the value of the 50th percentile weight unit in the block, and also calculates the feerate at the 10th, 25th, 75th, and 90th percentiles. This more accurately corresponds with what is generally meant by median feerate.
Tree-SHA512: 59255e243df90d7afbe69839408c58c9723884b8ab82c66dc24a769e89c6d539db1905374a3f025ff28272fb25a0b90e92d8101103e39a6d9c0d60423a596714
e306be7429 Use 72 byte dummy signatures when watching only inputs may be used (Andrew Chow)
48b1473c89 Use 71 byte signature for DUMMY_SIGNATURE_CREATOR (Andrew Chow)
18dfea0dd0 Always create 70 byte signatures with low R values (Andrew Chow)
Pull request description:
When creating signatures for transactions, always make one which has a 32 byte or smaller R and 32 byte or smaller S value. This results in signatures that are always less than 71 bytes (32 byte R + 32 byte S + 6 bytes DER + 1 byte sighash) with low R values. In most cases, the signature will be 71 bytes.
Because R is not mutable in the same way that S is, a low R value can only be found by trying different nonces. RFC 6979 for deterministic nonce generation has the option to specify additional entropy, so we simply use that and add a uin32_t counter which we increment in order to try different nonces. Nonces are sill deterministically generated as the nonce used will the be the first one where the counter results in a nonce that results in a low R value. Because different nonces need to be tried, time to produce a signature does increase. On average, it takes twice as long to make a signature as two signatures need to be created, on average, to find one with a low R.
Having a fixed size signature makes size calculations easier and also saves half a byte of transaction size, on average.
DUMMY_SIGNATURE_CREATOR has been modified to produce 71 byte dummy signatures instead of 72 byte signatures.
Tree-SHA512: 3cd791505126ce92da7c631856a97ba0b59e87d9c132feff6e0eef1dc47768e81fbb38bfbe970371bedf9714b7f61a13a5fe9f30f962c81734092a4d19a4ef33
18f690ec2f wallet: shuffle coins before grouping, where warranted (Karl-Johan Alm)
Pull request description:
Coins are randomly shuffled in coin selection to avoid unintentional privacy leaks regarding the user's coin set. For the case where a user has a lot of coins with the same destination, these will be grouped into groups of 10 *before* the shuffling.
It is unclear whether this has any implications at all, but this PR plugs the potential issue, if there ever is one, by shuffling the coins before they are grouped.
Issue brought up in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204554549
Tree-SHA512: fb50ed4b5fc03ab4853d45b76e1c64476ad5bcd797497179bc37b9262885c974ed6811159fd8e581f1461b6cc6d0a66146f4b70a2777c0f5e818d1322e0edb89
The `help2man` parses a string containing two spaces between words with an issue:
it gives out `.TP` and `.IP` commands instead of a single `.IP` command.
Removing an extra space fixes this issue.
Currently the `-help` output for the `-stdin` option looks without any issue due to eliminating
of two spaces between words by a `FormatParagraph` call for this particular case.
For consistency and preventing from future regressions extra spaces have been removed from the both lines.
The redundant `strprintf` call has been removed aswell.
Make sure that translations are synchronized with transifex before the
branch-off point to minimize the difference and prevent duplicate work.
Tree-SHA512: 41e71eaf14094606fd90011d035c551a635d5a715f865a49841dbe2b54a76b7fbf59a7918f86e5fd80a717e2934a9613fe463391fd01848d0a01e5c4e7e7fef0
This commit removes the `CBloomFilter::CBloomFilter(const unsigned int, const double, const unsigned int)` constructor, which became obsolete with 086ee67.
Removes medianfeerate result from getblockstats.
Adds feerate_percentiles which give the feerate of the 10th, 25th, 50th,
75th, and 90th percentile weight unit in the block.
bb5b1c0b2d [Docs] upgrade rescan time warning from minutes to >1 hour (Mason Simon)
Pull request description:
When I rescanned just now it took well over an hour. The time warning "may take minutes" didn't prepare me for that.
```
2018-08-08T03:10:17Z [wallet] Still rescanning. At block 174747. Progress=0.008341
2018-08-08T03:11:17Z [wallet] Still rescanning. At block 204233. Progress=0.024533
2018-08-08T03:12:17Z [wallet] Still rescanning. At block 221170. Progress=0.038340
...
2018-08-08T04:16:17Z [wallet] Still rescanning. At block 524815. Progress=0.957105
2018-08-08T04:17:17Z [wallet] Still rescanning. At block 528572. Progress=0.971323
2018-08-08T04:18:17Z [wallet] Still rescanning. At block 532458. Progress=0.986824
```
This is on a 4-core 4ghz system with a 7200rpm drive.
Tree-SHA512: 722ccf566bfd6a3381fa173e08849cb676fe4c1f1cb2c4b86b07df2a5dc1ca0d54797cbe8fd606cdc2c60fef2be7c98e052460decdac2132ba759cff822132e8
227d27e70c Use pushKV in some new PSBT RPCs. (Daniel Kraft)
Pull request description:
Most of the code uses `UniValue::pushKV` where appropriate, but some new RPC code related to PSBTs did not. This fixes those places - after this change, there are no remaining source files I could find that contain `push_back(Pair(`.
Tree-SHA512: d6567cf144d05d7e42276bd66ff4cd44413328f985772d11bb9d7339d32ab7c3438d4bb0040a37e75f8d193c610b08fa971073935885e0a178546aa045daf9fa
e254ff5d53 Introduce a maximum size for locators. (Gregory Maxwell)
Pull request description:
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
Locators are cheap to process so allowing a few more is harmless,
so this sets the maximum to 64-- which is enough for blockchains
with 2^64 blocks before the get overhead starts increasing.
Tree-SHA512: da28df9c46c988980da861046c62e6e7f93d0eaab3083d32e408d1062f45c00316d5e1754127e808c1feb424fa8e00e5a91aea2cc3b80326b71c148696f7cdb3
With watching only inputs, we do not know how large the signatures
for those inputs will be as their signers may not have implemented
71 byte signatures. Thus we estimate their fees using the 72 byte
dummy signature to ensure that we pay enough fees.
This only effects fundrawtransaction when includeWatching is true.
When extra entropy is not specified by the caller, CKey::Sign will
now always create a signature that has a low R value and is at most
70 bytes. The resulting signature on the stack will be 71 bytes when
the sighash byte is included.
Using low R signatures means that the resulting DER encoded signature
will never need to have additional padding to account for high R
values.
The largest sensible size for a locator is log in the number of blocks.
But, as noted by Coinr8d on BCT a maximum size message could encode a
hundred thousand locators. If height were used to limit the messages
that could open new attacks where peers on long low diff forks would
get disconnected and end up stuck.
Ideally, nodes first first learn to limit the size of locators they
send before limiting what would be processed, but common implementations
back off with an exponent of 2 and have an implicit limit of 2^32
blocks, so they already cannot produce locators over some size.
This sets the limit to an absurdly high amount of 101 in order to
maximize compatibility with existing software.
faab63111d shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
23fbbb100f wallet: sum ancestors rather than taking max in output groups (Karl-Johan Alm)
Pull request description:
This is pointed out in https://github.com/bitcoin/bitcoin/pull/12257#discussion_r204549758.
Basically, the ancestors gives an indication as to how many ancestors the resulting transaction will have, which is more precise when summing up the values, rather than taking the maximum, since all the coins in the group will become ancestors if selected.
Tree-SHA512: 0588c4b6059669650614817e041526a2ab89dda8c07fca8e077c7669dca1fed51cd164f7df56340840ab60285d48f3b140dcee64f64bf696b2dd4ab16d556a13
13bb5cae31 Docs: fix GetWarnings docs to reflect behavior (Ben Woosley)
Pull request description:
In "gui", it returns all warnings, joined by a separator
In "statusbar", it returns the last warning set which seems notionally to be the most important, though that is debatable
Tree-SHA512: 5fc0dc68d143a040b7b893b7176188e2b064c2cf1d559420906e4de636e16e9ab7451a1b87603020a7a8f66d6b94f4ee6c7da2697efad879f9e6de9c0e0c9ac1
faa24441ec policy: Remove promiscuousmempoolflags (MarcoFalke)
Pull request description:
It seems odd to clutter validation code with features that can only ever be used for testing (testnet or regtest). Removing that test-only code makes the mempool logic less painful to understand and easier to reason about when changed or refactored in the future.
Tree-SHA512: 3b897aa9604ac8d82ebe9573c6efd468c93ddaa08d378ebc902e247b7aa6c68fcde71e5b449c08f17a067146cdc66dc50a67ce06d07607c27e5189a49c3fba3f
93de2891fa wallet: assert to ensure accuracy of CMerkleTx::GetBlocksToMaturity (Ben Woosley)
Pull request description:
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Tree-SHA512: 8e71c26f09fe457cfb00c362ca27066f7f018ea2af1f395090fdc7fd9f5964b76f4317c23f7a4923776f00087558511da5c1c368095be39fb1bacc614a93c32f
a1a998cf24 wallet: Fix backupwallet for multiwallets (Daniel Kraft)
Pull request description:
`backupwallet` was broken for multiwallets in their own directories (i.e. something like `DATADIR/wallets/mywallet/wallet.dat`). In this case, the backup would use `DATADIR/wallets/wallet.dat` as source file and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source file was not present) or would silently back up the wrong wallet; especially the latter behaviour can be quite bad for users.
Tree-SHA512: 7efe2450ca047e40719fcc7cc211ed94699056020ac737cada7b59e8240298675960570c45079add424d0aab520437d5050d956acd695a9c2452dd4317b4d2c4
This commit slightly changes the format of the "Usage" strings in CLI
`-help` messages to meet the expection of the help2man tool, which we
use to generate man pages. On the way, we remove a few calls to
`strprintf()`, which became superficial after commit 32fbfda.
They should also work with any other mutex type which std::unique_lock
supports.
There is no change in behavior for current code that calls these macros with
CCriticalSection mutexes.
Fix that the early bailout optimization tests did not test the actual
selection because their utxo pool was polluted by the make_hard_case test
preceding.
7bf22bf0c2 gui: Reject options dialog when key escape is pressed (João Barbosa)
4a43306a4f gui: Reject edit address dialog when key escape is pressed (João Barbosa)
f7a553177d gui: Add GUIUtil::ItemDelegate with keyEscapePressed signal (João Barbosa)
Pull request description:
Currently `EditAddressDialog` and `OptionsDialog` don't close when the escape key is pressed. The `QDataWidgetMapper` instances prevents closing the dialogs because the escape key is used to reset the widgets values. More details and workarounds in https://stackoverflow.com/a/51487847 and http://qtramblings.blogspot.com/2010/10/qdatawidgetmapper-annoyances.html.
The adopted solution is different from the above references. It turns out that `QDataWidgetMapper::setItemDelegate` sets the event filter for all mapped widgets. So in this PR the mapper's delegate are changed to a custom `GUIUtil::ItemDelegate` that offers the signal `keyEscapePressed`, which is connected to the `QDialog::reject` slot.
Note that the installed event filter lets all events pass, so the current behaviour isn't changed, meaning that widgets values are reset in addition to closing the dialog.
Tree-SHA512: 9c961d488480b4ccc3880a11a8f1824b65f77570ee8918c7302c62775a1a73e52ae988a31a55ffff87b4170ddbecf833c2f09b66095c00eb6854a4d43f030f1f
312ff01ee5 -prune option -help output aligned with code (Hennadii Stepanov)
Pull request description:
The -help output for -prune is aligned with the code.
In the code (.../src/init.cpp#L1063):
```
if (nPruneTarget < MIN_DISK_SPACE_FOR_BLOCK_FILES) {
return InitError(strprintf(_("Prune configured below the minimum of %d MiB. Please use a higher number."), MIN_DISK_SPACE_FOR_BLOCK_FILES / 1024 / 1024));
}
```
So correct value of nPruneTarget is **greater than or equal to** MIN_DISK_SPACE_FOR_BLOCK_FILES.
Tree-SHA512: 8e55aa99c8f5a9d020677b0f1b016215e2dbda5fa4ee7c8504b12a3abef226bc21beca118fa332c0bf206a4aff913a5a717b55bb5b2ecdba38423e9c0161209e
fa365021bb doc: Remove outdated net comment (MarcoFalke)
Pull request description:
`mapAddresses` and the corresponding "critsect" has been removed in 5fee401fe1 more than 6 years ago. Now is probably a good time to remove this confusing comment.
Tree-SHA512: 498a403d5703da395c18a7ebb776aa6e693e59fe43a839fefd261e0a5af58621763813979d4cfbd8d1728ce73b325b82002e393cde79bdbff33e0fbf68ab6747
fe7180c5b2 [trivial,doc] Fix memory consistency model in comment (Jesse Cohen)
Pull request description:
Updating a comment overlooked during review in #13247
Tree-SHA512: 0bd54ba1c265fdd77fd6e12ad0be46dd422348f7d926ce9abaca53fdb3a3c55c0d1cd90b4382321352076f4a81e2249c0014cd789f47a3637cb93bd983cb4657
f6b7fc349c Support h instead of ' in hardened descriptor paths (Pieter Wuille)
fddea672eb Add experimental warning to scantxoutset (Jonas Schnelli)
6495849bfd [QA] Extend tests to more combinations (Pieter Wuille)
1af237faef [QA] Add xpub range tests in scantxoutset tests (Jonas Schnelli)
151600bb49 Swap in descriptors support into scantxoutset (Pieter Wuille)
0652c3284f Descriptor tests (Pieter Wuille)
fe8a7dcd78 Output descriptors module (Pieter Wuille)
e54d76044b Add simple FlatSigningProvider (Pieter Wuille)
29943a904a Add more methods to Span class (Pieter Wuille)
Pull request description:
As promised, here is an implementation of my output descriptor concept (https://gist.github.com/sipa/e3d23d498c430bb601c5bca83523fa82) and integration within the `scantxoutset` RPC that was just added through #12196.
It changes the RPC to use descriptors for everything; I hope the interface is simple enough to encompass all use cases. It includes support for P2PK, P2PKH, P2WPKH, P2SH, P2WSH, multisig, xpubs, xprvs, and chains of keys - combined in every possible way.
Tree-SHA512: 63b54a96e7a72f5b04a8d645b8517d43ecd6a65a41f9f4e593931ce725a8845ab0baa1e9db6a7243190d8ac841f6e7e2f520d98c539312d78f7fd687d2c7b88f
a13647b8bd [qa] Add test for too-large wallet output groups (Suhas Daftuar)
57ec1c97b2 [wallet] correctly limit output group size (Suhas Daftuar)
Pull request description:
Also add a test to ensure that output groups are being limited, even if a wallet has many outputs corresponding to the same scriptPubKey (the test fails without the first commit).
Tree-SHA512: 2aaa82005b0910488f5cbf40690d4c5e2f46949e299ef70b4cb6e440713811443d411dcbc6d71b1701fd82423073125e21747787d70830cd021c841afb732d51
cbeaa91dbb Update ValidationInterface() documentation to explicitly specify threading and memory model (Jesse Cohen)
b296b425a7 Update documentation for SingleThreadedSchedulerClient() to specify the memory model (Jesse Cohen)
9994d01d8b Add Unit Test for SingleThreadedSchedulerClient (Jesse Cohen)
Pull request description:
As discussed in #13023 I've split this test out into a separate pr
This test (and documentation update) makes explicit the guarantee (previously undefined, but implied by the 'SingleThreaded' in `SingleThreadedSchedulerClient()`) - that callbacks pushed to the `SingleThreadedSchedulerClient()` obey the single threaded model for memory and execution - specifically, the callbacks are executed fully and in order, and even in cases where a subsequent callback is executed by a different thread, sequential consistency of memory for all threads executing these callbacks is maintained.
Maintaining memory consistency should make the api more developer friendly - especially for users of the validationinterface. To the extent that there are performance implications from this decision, these are not currently present in practice because all use of this scheduler happens on a single thread currently, furthermore the lock should guarantee consistency across callback executions even when callbacks are executed by multiple threads (as the test does).
Tree-SHA512: 5d95a7682c402e5ad76b05bc9dfbca99ca64105f62ab9e78f6fc0f6ea8c5277aa399fbb94298e35cc677b0c2181ff17259584bb7ae230e38aa68b85ecbc22856
494634a052 bench: Make CoinSelection output groups pass eligibility filter (Andrew Chow)
Pull request description:
Set the depth of the output groups used in the CoinSelection benchmark to be 6 in order to pass the eligibility filter for the benchmark.
Fixes#13813
Tree-SHA512: 55fc6aeda0127f5e155efb982aec211b70dfd3257808dce627886af6866ffa25de4df3c9b10f8c45b6c298a42542c54654f36e59efb208e9055885361f0e501c
247d5740d2 Ignore unknown config file options for now (Pieter Wuille)
04ce0d88ca Report when unknown config file options are ignored (Pieter Wuille)
Pull request description:
As reported by @satwo on IRC a few days ago, the current mechanism of treating unknown config file options as errors is problematic for options like `-rpcclienttimeout` which aren't defined for `bitcoind`.
A full solution would be to either make all binaries be aware of each other's options, or to permit config file options that only apply to specific binaries (`bitcoind`, `bitcoin-qt`, `bitcoin-cli`). Both of these seem too invasive to introduce for 0.17.
As a compromise, this PR makes it ignores those options, but still warn about it in the log file.
Tree-SHA512: dfddc771b91df3031a9c98d9f3292f8f4fcd1b97ebb7317b2f457e12d9f205dc63f42721302e7258dbb53f273d7cc041a65a0a9120972769555784e1f1cc9aef
fa8f2d826c doc: Fix chainTxData comment (MarcoFalke)
fa6094f152 chainparams: Update with data from assumed valid chain (MarcoFalke)
Pull request description:
Can be reviewed by using the `getblock` and `getchaintxstats` rpcs of a synced node. Reviewers get extra points when their full node has checkpoints and assumevalid disabled.
Tree-SHA512: cedd61fde129ae4c16fc12275b61e4c5659b6d72dd801c608efc294188561bc986d94652fe9bea71ada48654258e2a074d2d2da78036c69608ccff3a6cc1ccf5
fa5ed4f8d2 refactor: Avoid locking tx pool cs thrice (MarcoFalke)
Pull request description:
`addUnchecked` is (outside the tests) only called by ATMP, which already takes the tx pool read lock. So locking it twice more in both `addUnchecked` methods seems redundant.
Similarly `CalculateMemPoolAncestors` is (beside once in the wallet) only called in contexts, where the tx pool lock is already taken. So remove the lock there as well.
Tree-SHA512: fcf603b570da0fc529fe6db8add218663eae52845510732bee0d4611263d2429d3d3c9c8ae68493d67287d13504500ed51905ccbe711eb15a0af3b019edad543
All but one call to GetBlocksToMaturity is testing it relative to 0
for the purposes of determining whether the coinbase tx is immature.
In such case, the value greater than 0 implies that the tx is coinbase,
so there is no need to separately test that status.
This names the concept for easy singular use.
620361fce8 Fix accidental use of the addition assignment operator ("+="). Remove newlines from error message. (practicalswift)
Pull request description:
Fix accidental use of the addition assignment operator (`+=`).
_Note to reviewers:_ Perhaps the `\n`:s should be removed too?
Tree-SHA512: 4e8c2dfd6025d78ef9d60522297994829dacc447e6b6782e15c0bdd5dd2daa17ca9a8948bfa9a15be57d9286092356381d7e6747980303852d273eb0df0dd76b
46340b3337 [bench] Add benchmark for unserialize prevector (Akio Nakamura)
Pull request description:
This PR adds benchmarks for the unserialization of the prevector.
Note: Separated from #12324.
Tree-SHA512: c055a283328cc2634c01eb60f26604a8665939bbf77d367b6ba6b4e01e77d4511fab69cc3ddb1e62969adb3c48752ed870f45ceba153eee192302601341e18a7
3fe836b78d [moveonly] Extract RescanWallet to handle a simple rescan (Ben Woosley)
Pull request description:
Where the outcome does not depend on the result, apart from a simple
success check.
Tree-SHA512: e0d29c6fc0c7f99a730289e5a80deb586b2848aead56b5198a71ef01f65374812468dfd57be0b8b076eb9be4090d5101d28d979a1d5c3d2f1caeca77b303e90e
fad231ad41 Fix merging of global unknown data in PSBTs (Andrew Chow)
41df035ee1 Check that PSBT keys are the correct length (Andrew Chow)
Pull request description:
This PR fixes a few bugs that were found and adds tests checking for these errors.
Specifically:
- Single byte keys are checked to actually be one byte.
- Unknown global data must be merged when combining two PSBTs.
Tree-SHA512: c0e7b4bc607d510cc005aaa7c0813ee58c5467ab7ce4adce485522dfeee92b1af3d29fe89df778b0ea812bb3827e085b30e04d4f4ebcefd8364d809573991332
12dd101345 scripted-diff: Remove trailing whitespaces (João Barbosa)
Pull request description:
The script test/lint/lint-whitespace.sh should prevent new cases.
This happens in some pulls where the code editor and the author 'git add's them, so this would fix it all.
Tree-SHA512: bcdd3472fcd01a2754e52212c7db1de2fdc422728b06785481954a27162fb72001cb73708329cc56e95bcc5e45c1348ebc4eacc2ccfa6aa12413c7ec450b6a33
Clicking on the proxy icon will open settings showing the network tab
Create enum Tab in OptionsModel
Use new connect syntax
Use lambda for private slots
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
84547fa6d4 Avoid creating a temporary vector for size-prefixed elements (Pieter Wuille)
Pull request description:
This is a simple improvement to the PSBT serialization code, avoiding the need for temporary vectors everywhere.
Tree-SHA512: 9f7243b7169ec8ba00ffad31af03c016ab84e4f76ebac810167f91f5e8008f3827ad59fbcee0cb2bd2334fc26466eb222404af24e7fb6ec040fd78229ebe0fd1
fa451511a1 doc: Adjust bitcoincore.org links (MarcoFalke)
Pull request description:
Minor adjustments to our https://bitcoincore.org/ links:
Mainly adding links of the Bitcoin Core Github mirror and Bitcoin Core website to the doxygen introduction. (See e.g. current master: https://dev.visucore.com/bitcoin/doxygen/index.html). Also removing the link to bitcoin.org, to not imply there is only one resource that educates about bitcoin.
Tree-SHA512: d4d50f6de4d4b412203934e947889ebc0f564747e26f9190a2cff64234bf9fc3d56b8f056651550ce568170fba448559fa005959ef4e504d990e2fbc96a2ed77
Because false is synonymous with TX_NONSTANDARD, this conveys the same
information and makes the handling explicitly based on script type,
simplifying each call site.
Prior to this change it was common for the return value to be ignored,
or for the return value and TX_NONSTANDARD to be redundantly handled.
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
0454b56d8a trivial: remove unneeded include (Nikolay Mitev)
Pull request description:
Remove dead include
Tree-SHA512: 66380fe25259d37a19f955142ad53da24d4927064a84249989f54bebc21d9d688236fb60979acc79f219b05692c4c73b3ebab0872b8d03ab2447b0b44a06c8ed
793290f940 Net: Fixed a race condition when disabling the network. (lmanners)
Pull request description:
This change addresses a race condition where setnetworkactive=false wouldn't always disconnect all peers.
Before this change, the following could happen:
1. Thread A -- Begins connecting to a node.
2. Thread B -- Sets kNetworkActive=false and disconnects connected nodes.
3. Thread A -- Finishes connecting and adds node to list of connected nodes.
The node that was connected from Thread A remains connected and active,
even though kNetworkActive=false.
To fix the race, disconnections when kNetworkActive=false are now handled in the main network loop.
fixes#13038
Tree-SHA512: 6d0b7a78ae956358e796efcc034cb532c2e0d824a52ae822a3899eefc7df76327519d1f2d77362c9fddf34ef860abd095d7490d7cc02d0ba7543bf1e8c8f2535
5617840392 Drop dead code from Stacks (Ben Woosley)
Pull request description:
Stacks is local to this file, and only used in DataFromTransaction, so
it's easy to confirm this code is unused.
Tree-SHA512: cc680c99f9b31cb56db70f453087d642f83906ce594c07a6bf3e61427cfbee41441495d440b240419ba3386582cf0670c0999b2f51e7fd56b00e0a0f3f618845
9544a3f3fc tiny refactor for ArgsManager (AtsukiTak)
Pull request description:
This PR contains some small refactors for `ArgsManager`.
1. Mark `const` on member function if it possible.
2. Remove unused `error` argument from `ArgsManager::IsArgKnown`.
I'm not sure whether these refactors should be separated into another PR. If so, I will do that.
Tree-SHA512: 7df09e7f7c4cdd2e7cd60e34137faa7ca7463be66490f8552fdea3656da6ccc98886e258bdeef21820d197fc2fde06ab2d3405205f5de53f258df7c191d206b0
01a06d6686 Avoid locking mutexes that are already held by the same thread (practicalswift)
Pull request description:
Avoid locking mutexes that are already held by the same thread. These are reentrant mutexes, but still no need to lock them more than once per thread :-)
Tree-SHA512: e2fb85882e8800892fd8e8170f3c13128d6acfeb14d7b69fb9555f2b7ad0884fb201cf945b8144ffaf6fb1253c28af7c8c6c435319a7ae30ca003f28aa645a98
ac8a1d092e [RPC] Remove field in getblocktemplate help that has never been used (Conor Scott)
Pull request description:
[BIP 22 - getblocktemplate](https://github.com/bitcoin/bips/blob/master/bip-0022.mediawiki#Transactions%20Object%20Format) specifies an optional flag, `required` if the transaction must be in the block.
Luke's implementation #936 did not include this flag, and it was later added to the help description in #3246 (more than a year later) but the field was still never actually implemented. As far as I can tell, bitcoin core would have never actually included this in a `getblocktemplate` call, so it seems logical to remove it from the help description.
If I am missing something or this is considered harmless - I can close the PR.
Tree-SHA512: f25dda51cc4e1512aff69309be04e3053bdccc1cf03c8d58e8866aa1fdf9d86cc57df872e85528351fc8a8d6d64a8f46a36c513680834762d854f368fbeb0f44
6755569840 trivial: Replace CPubKey::operator[] with CPubKey::vch where possible (Nikolay Mitev)
Pull request description:
Use variable name instead of calling operator[] through &(*this)[0]
Tree-SHA512: 7054ffda0fa33fb45d4d9f3b29698643f02fd1421d78d5197a0881f2c368dc410647fd2e1a6feb8048e30f8ab8bc2fa8749bf42b9ccbe42c30de8ff80ac45274
5f019d5354 Removes the boost/algorithm/string/join dependency (251)
Pull request description:
This commit removes the `boost/algorithm/string/join` dependency from the project by replacing `boost::algorithm::join` with the helper function proposed by @MarcoFalke in https://github.com/bitcoin/bitcoin/pull/13726#discussion_r204159967
Tree-SHA512: d4ba3e7621b76bd5210aec9b8d6c320f7ee963d7f902e6d2d3fc0eadbee1cd77799e5c09be9c11452d2825f25740fc436cdec3a6b6c66ced674d771e4ed306ae
This commit contains 2 refactors.
1. mark "const" on ArgsManager::GetHelpMessage and IsArgKnown.
2. remove unused "error" argument from ArgsManager::IsArgKnown.
Firstly, I mark "const" on where it is possible to. It is mentioned
before (e.g. https://github.com/bitcoin/bitcoin/pull/13190#pullrequestreview-118823133).
And about 2nd change, ArgsManager::IsArgKnown was added at commit #4f8704d which was
merged at PR #13112. But from its beggining, "error" argument never be used.
I think it should be refactored.
f447a0a707 Remove program options from build system (Chun Kuan Lee)
11588c639e Replace boost program_options (Chun Kuan Lee)
Pull request description:
Concept from #12744, but without parsing negated options.
Tree-SHA512: 7f418744bb8934e313d77a5f162633746ef5d043de802b9c9cd9f7c1842e7e566eb5f171cd9e2cc13317281b2449c6fbd553fa4f09b837e6af2f5d2b2aabdca2
fa4bf92be9 Remove dead service bits code (MarcoFalke)
Pull request description:
Seems fine to remove for the upcoming 0.17 release
Fixes#10993
Tree-SHA512: 3a4664b787e3da399bcaaba693619bd384826df14f469dbdfbbfffc540d9da3f2b322cda262b43388376785f77907c2540541c239ab0fca82bd7eb69d02b6b7a
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
Checks that all of the one byte type keys are actually one byte and
throw an error if they are not.
Add tests for each type to check for this behavior.
27ee53c1ae wallet: Add error handling. Check return value of ParseUInt32(...) in ParseHDKeypath(...). (practicalswift)
7223263899 wallet: Add tests for ParseHDKeypath(...) (practicalswift)
Pull request description:
Add error handling. Check return value of `ParseUInt32(...)` in `ParseHDKeypath(...)`.
`ParseUInt32(...)` returns `false` if the entire string could not be parsed or when an overflow or underflow occurred. In such case the uninitialized variable `number` would be used in the calculation of `path` (prior to this commit).
An example key path triggering this is `m/0/4294967296`:
```
ParseHDKeypath("m/0/4294967296", keypath);
```
`4294967296` is `1` + `0xFFFFFFFF` (`uint32_t` max: `4294967295`).
Introduced in a4b06fb42e which was merged into `master` 14 hours ago as part of #13557 ("BIP 174 PSBT Serializations and RPCs").
Tree-SHA512: e5ff423f67c18d82c1231bde6343587a453e793c32004d93dc9b61be6d9372b57a6b2c9978d9eb1000d6cc82fd180f2486013f928dca737fb92daad22c16e467
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
417b6c1d29 bitcoinconsensus: invalid flags should be set to bitcoinconsensus_error type, add test cases covering bitcoinconsensus error codes (Thomas Kerin)
Pull request description:
A check was added to the bitcoinconsensus verify_script codepath to ensure that callers only used _exposed_ interpreter flags. I think this error should be written to `bitcoinconsensus_err* err` and not returned by verify_script?
I modified the check so it indicates the error using *err like the others, and added tests covering the error codes.
Tree-SHA512: 8ab370e56956a7d4740f83475e6078774affd663ac92383a02b85295da550f1b4f7a7a68f32ed5c5bcb39d98e2f15ec0b76de8399887e7763eb7c1e21d131093
822a2a33a7 Modified in_addr6 cast in CConman class to work with msvc. (Aaron Clauson)
Pull request description:
Fix to allow net.cpp to compile with MSVC. Without this fix the `(in6_addr)IN6ADDR_ANY_INIT` implicit cast generates a compilation error.
Tree-SHA512: f21c5002401dc93564dcf8d49fbafe7c03ad4182df1616d2ee201e2e172f1d696ca7982fb5b42a3b7d6878c8649823044a858401b4172239fb4b0cc2a38db282
And use it to reduce chainparamsbase's direct reliance on util.h to
only args handling.
utilmemory.h can be replaced with <memory> once we move to C++14.
db6eb90094 [doc] Remove outdated comment about mining code ignoring CPFP (James O'Beirne)
Pull request description:
BlockAssembler chooses transactions on the basis of packages (which incorporate
unconfirmed ancestors into feerate), so the specified RBF comment about mining
code ignoring CPFP is out of date.
Tree-SHA512: a4c1e60fee0a8f450526d565951187f869d000febce0eea8a8d2e18bb140c3c1b8602953d9dcab2d1e8d0c4fc8d392c67eb0773d67e52080d48e6b9bf13f9ee2
be98b2d9a8 [QA] Add scantxoutset test (Jonas Schnelli)
eec7cf7b33 scantxoutset: mention that scanning by address will miss P2PK txouts (Jonas Schnelli)
94d73d32ab scantxoutset: support legacy P2PK script type (Jonas Schnelli)
892de1dfea scantxoutset: add support for scripts (Jonas Schnelli)
78304941f7 Blockchain/RPC: Add scantxoutset method to scan UTXO set (Jonas Schnelli)
9048575511 Add FindScriptPubKey() to search the UTXO set (Jonas Schnelli)
Pull request description:
Alternative to #9152.
This takes `<n>` pubkeys and optionally `<n>` xpubs (together with a definable lookup windows where the default is 0-1000) and looks up common scripts in the UTXO set of all given or derived keys.
The output will be an array similar to `listunspent`. That array is compatible with `createrawtransaction` as well as with `signrawtransaction`.
This makes it possible to prepare sweeps and have them signed in a secure (cold) space.
Tree-SHA512: a2b22a117cf6e27febeb97e5d6fe30184926d50c0c7cbc77bb4121f490fed65560c52f8eac67a9720d7bf8f420efa42459768685c7e7cc03722859f51a5e1e3b
fa43a4138b bench_bitcoin: Avoid read/write to default datadir (MarcoFalke)
ea80b81e2e test_bitcoin: Avoid read/write to default datadir (MarcoFalke)
Pull request description:
tests should never read or write and potentially corrupt the default datadir, so try to avoid it.
Tree-SHA512: ee446ff4bf59da2aed38c2e4758581d6103e9d4c35a118497e9ec21d566ba33d913e160c2d7ba2ea6f937f000343ecea3816154bd87ee47f64f5b0cf9e88f6e0
Added functional tests for PSBT that test the RPCs. Also added all
of the BIP 174 test vectors (except for the updater tests) in the
functional tests.
Added a Unit test for the BIP 174 updater test vector.
walletprocesspsbt takes a PSBT format transaction, updates the
PSBT with any inputs related to this wallet, signs, and finalizes
the transaction. There is also an option to not sign and just
update.
walletcreatefundedpsbt creates a PSBT from user provided data
in the same form as createrawtransaction. It also funds the transaction
and takes an options argument in the same form as fundrawtransaction.
The resulting PSBT is blank with no input or output data filled
in.
decodepsbt takes a PSBT and decodes it to JSON
combinepsbt takes multiple PSBTs for the same tx and combines them.
finalizepsbt takes a PSBT and finalizes the inputs. If all inputs
are final, it extracts the network serialized transaction and returns
that instead of a PSBT unless instructed otherwise.
createpsbt is like createrawtransaction but for PSBTs instead of
raw transactions.
convertpsbt takes a network serialized transaction and converts it
into a psbt. The resulting psbt will lose all signature data and
an explicit flag must be set to allow transactions with signature
data to be converted.
BlockAssembler chooses transactions on the basis of packages (which incorporate
unconfirmed ancestors into feerate), so the specified RBF comment about mining
code ignoring CPFP is out of date.
d45b344ffd Bucket for inbound when scheduling invs to hide tx time (Gleb)
Pull request description:
It has been brought up to my attention that current random delays mechanism (originally intended to obfuscate transaction metadata) allows to easily estimate the time a transaction was received by a node.
It may be done by connecting multiple observer nodes to the same node. Each of those nodes will generate its own schedule of delays. Combined metadata regarding those events from different sources allows an observer to estimate transaction time.
After this patch a spy won't gain additional information by just creating multiple connections to a target.
Tree-SHA512: c71dae5ff350b614cb40a8e201fd0562d3e03e3e72a5099718cd451f0d84c66d5e52bbaf0d5b4b75137514c8efdedcc6ef4df90142b360153f04ad0721545ab1
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
Commit 3fdb29778a renamed share/rpcuser to share/rpcauth but left references to the old path in code; this commit fixes the old references.
Performed update using https://github.com/facebook/codemod with command: `codemod --extensions cpp,py,md 'share/rpcuser' 'share/rpcauth'`
-BEGIN VERIFY SCRIPT-
git grep --files-with-matches 'share/rpcuser' src/*.cpp | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
git grep --files-with-matches 'share/rpcuser' test/functional/*.py | xargs sed -i -E 's:share/rpcuser:share/rpcauth:g'
-END VERIFY SCRIPT-
backupwallet was broken for multiwallets in their own directories
(i.e. something like DATADIR/wallets/mywallet/wallet.dat). In this
case, the backup would use DATADIR/wallets/wallet.dat as source file
and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source
file was not present) or would silently back up the wrong wallet;
especially the latter behaviour can be quite bad for users.
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
ac51a26bdc During IBD, when doing pruning, prune 10% extra to avoid pruning again soon after (Luke Dashjr)
Pull request description:
Pruning forces a chainstate flush, which can defeat the dbcache and harm performance significantly.
Alternative to #11359
Tree-SHA512: 631e4e8f94f5699e98a2eff07204aa2b3b2325b2d92e8236b8c8d6a6730737a346e0ad86024e705f5a665b25e873ab0970ce7396740328a437c060f99e9ba4d9
3339ba28e9 Make g_enable_bip61 a member variable of PeerLogicValidation (Jesse Cohen)
6690a28606 Restrict as much as possible in net_processing to translation unit (Jesse Cohen)
1d4df02b7e [move-only] Move things only referenced in net_processing out of header file (Jesse Cohen)
02bbc05310 Rescope g_enable_bip61 to net_processing (Jesse Cohen)
Pull request description:
As part of a larger effort to decouple net_processing and validation a bit, these are a bunch of simple scope cleanups. I've moved things out of the header file that are only referenced in net_processing and added static (or anonymous namespace) modifiers to everything possible in net_processing.
There are a handful of functions which could be static except that they are exposed for the sake of unit testing - these are explicitly commented. There has been some discussion of a compile time annotation, but no conclusion has been reached on that yet.
This is somewhat related to other prs #12934#13413#13407 and will be followed by prs that reduce reliance on cs_main to synchronize data structures which are translation unit local to net_processing
Tree-SHA512: 46c9660ee4e06653feb42ba92189565b0aea17aac2375c20747c0d091054c63829cbf66d2daddf65682b58ce1d6922e23aefea051a7f2c8abbb6db253a609082
