Previously Bitcoin would send 1/4 of transactions out to all peers
instantly. This causes high overhead because it makes >80% of
INVs size 1. Doing so harms privacy, because it limits the
amount of source obscurity a transaction can receive.
These randomized broadcasts also disobeyed transaction dependencies
and required use of the orphan pool. Because the orphan pool is
so small this leads to poor propagation for dependent transactions.
When the bypass wasn't in effect, transactions were sent in the
order they were received. This avoided creating orphans but
undermines privacy fairly significantly.
This commit:
Eliminates the bypass. The bypass is replaced by halving the
average delay for outbound peers.
Sorts candidate transactions for INV by their topological
depth then by their feerate (then hash); removing the
information leakage and providing priority service to
higher fee transactions.
Limits the amount of transactions sent in a single INV to
7tx/sec (and twice that for outbound); this limits the
harm of low fee transaction floods, gives faster relay
service to higher fee transactions. The 7 sounds lower
than it really is because received advertisements need
not be sent, and because the aggregate rate is multipled
by the number of peers.
Break the circular dependency between main and txdb by:
- Moving `CBlockFileInfo` from `main.h` to `chain.h`. I think this makes
sense, as the other block-file stuff is there too.
- Moving `CDiskTxPos` from `main.h` to `txdb.h`. This type seems
specific to txdb.
- Pass a functor `insertBlockIndex` to `LoadBlockIndexGuts`. This leaves
it up to the caller how to insert block indices.
Previously we used the CInv that would be sent to the peer announcing the
transaction as the key, but using the txid instead allows us to decouple the
p2p layer from the application logic (which relies on this map to avoid
duplicate tx requests).
Currently, we're keeping a timeout for each requested block, starting
from when it is requested, with a correction factor for the number of
blocks in the queue.
That's unnecessarily complicated and inaccurate.
As peers process block requests in order, we can make the timeout for each
block start counting only when all previous ones have been received, and
have a correction based on the number of peers, rather than the total number
of blocks.
Two-line patch to make it possible to shut down bitcoind cleanly during
the initial ActivateBestChain.
Fixes#6459 (among other complaints).
To reproduce:
- shutdown bitcoind
- copy chainstate
- start bitcoind
- let the chain sync a bit
- shutdown bitcoind
- copy back old chainstate
- start bitcoind
- bitcoind will catch up with all blocks during Init()
(the `boost::this_thread::interruption_point` / `ShutdownRequested()`
dance is ugly, this should be refactored all over bitcoind at some point
when moving from boost::threads to c++11 threads, but it works...)
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
This implements caching of ancestor state to each mempool entry, similar to
descendant tracking, but also including caching sigops-with-ancestors (as that
metric will be helpful to future code that implements better transaction
selection in CreatenewBlock).
The work limit served to prevent the descendant walking algorithm from doing
too much work by marking the parent transaction as dirty. However to implement
ancestor tracking, it's not possible to similarly mark those descendant
transactions as dirty without having to calculate them to begin with.
This commit removes the work limit altogether. With appropriate
chain limits (-limitdescendantcount) the concern about doing too much
work inside this function should be mitigated.
Continues "Make logging for validation optional" from #6519.
The idea there was to remove all ERROR logging of rejected transaction,
and move it to one message in the class 'mempoolrej' which logs the
state message (and debug info). The superfluous ERRORs in the log
"terrify" users, see for example issue #5794.
Unfortunately a lot of new logging was introduced in #6871 (RBF) and
#7287 (misc refactoring). This pull updates that new code.
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
fad6244 ATMP: make nAbsurdFee const (MarcoFalke)
fa762d0 [wallet.h] Remove main.h include (MarcoFalke)
fa79db2 Move maxTxFee out of mempool (MarcoFalke)
ProcessNewBlock would return failure early if CheckBlock failed, before
calling AcceptBlock. AcceptBlock also calls CheckBlock, and upon failure
would update mapBlockIndex to indicate that a block was failed. By returning
early in ProcessNewBlock, we were not marking blocks that fail a check in
CheckBlock as permanently failed, and thus would continue to re-request and
reprocess them.
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
If a new transaction will cause limitfreerelay
to be exceeded it should not be accepted
into the memory pool and the byte counter
should be updated only after the fact.
After discussion in #7164 I think this is better.
Max tip age was introduced in #5987 to make it possible to run
testnet-in-a-box. But associating this behavior with the testnet chain
is wrong conceptually, as it is not needed in normal usage.
Should aim to make testnet test the software as-is.
Replace it with a (debug) option `-maxtipage`, which can be
specified only in the specific case.
We used to have a trickle node, a node which was chosen in each iteration of
the send loop that was privileged and allowed to send out queued up non-time
critical messages. Since the removal of the fixed sleeps in the network code,
this resulted in fast and attackable treatment of such broadcasts.
This pull request changes the 3 remaining trickle use cases by random delays:
* Local address broadcast (while also removing the the wiping of the seen filter)
* Address relay
* Inv relay (for transactions; blocks are always relayed immediately)
The code is based on older commits by Patrick Strateman.
- Avoids string typos (by making the compiler check)
- Makes it easier to grep for handling/generation of a certain message type
- Refer directly to documentation by following the symbol in IDE
- Move list of valid message types to protocol.cpp:
protocol.cpp is a more appropriate place for this, and having
the array there makes it easier to keep things consistent.
Mempool requests use a fair amount of bandwidth when the mempool is large,
disconnecting peers using them follows the same logic as disconnecting
peers fetching historical blocks.
aa4b0c2 When not filtering blocks, getdata sends more in one test (Pieter Wuille)
d41e44c Actually only use filterInventoryKnown with MSG_TX inventory messages. (Gregory Maxwell)
b6a0da4 Only use filterInventoryKnown with MSG_TX inventory messages. (Patick Strateman)
6b84935 Rename setInventoryKnown filterInventoryKnown (Patick Strateman)
e206724 Remove mruset as it is no longer used. (Gregory Maxwell)
ec73ef3 Replace setInventoryKnown with a rolling bloom filter. (Gregory Maxwell)
One test in AcceptToMemoryPool was to compare a transaction's fee
agains the value returned by GetMinRelayFee. This value was zero for
all small transactions. For larger transactions (between
DEFAULT_BLOCK_PRIORITY_SIZE and MAX_STANDARD_TX_SIZE), this function
was preventing low fee transactions from ever being accepted.
With this function removed, we will now allow transactions in that range
with fees (including modifications via PrioritiseTransaction) below
the minRelayTxFee, provided that they have sufficient priority.
Store sum of legacy and P2SH sig op counts. This is calculated in AcceptToMemory pool and storing it saves redoing the expensive calculation in block template creation.
But keep translating them in the GUI.
This - necessarily - requires duplication of a few messages.
Alternative take on #7134, that keeps the translations from being wiped.
Also document GetWarnings() input argument.
Fixes#5895.
ebb25f4 Limit setAskFor and retire requested entries only when a getdata returns. (Gregory Maxwell)
5029698 prevent peer flooding request queue for an inv (kazcw)
Mruset setInventoryKnown was reduced to a remarkably small 1000
entries as a side effect of sendbuffer size reductions in 2012.
This removes setInventoryKnown filtering from merkleBlock responses
because false positives there are especially unattractive and
also because I'm not sure if there aren't race conditions around
the relay pool that would cause some transactions there to
be suppressed. (Also, ProcessGetData was accessing
setInventoryKnown without taking the required lock.)
This replaces using inv messages to announce new blocks, when a peer requests
(via the new "sendheaders" message) that blocks be announced with headers
instead of inv's.
Since headers-first was introduced, peers send getheaders messages in response
to an inv, which requires generating a block locator that is large compared to
the size of the header being requested, and requires an extra round-trip before
a reorg can be relayed. Save time by tracking headers that a peer is likely to
know about, and send a headers chain that would connect to a peer's known
headers, unless the chain would be too big, in which case we revert to sending
an inv instead.
Based off of @sipa's commit to announce all blocks in a reorg via inv,
which has been squashed into this commit.
Rebased-by: Pieter Wuille
For each 'bit' in the filter we really maintain 2 bits, which store either:
0: not set
1-3: set in generation N
After (nElements / 2) insertions, we switch to a new generation, and wipe
entries which already had the new generation number, effectively switching
from the last 1.5 * nElements set to the last 1.0 * nElements set.
This is 25% more space efficient than the previous implementation, and can
(at peak) store 1.5 times the requested amount of history (though only
1.0 times the requested history is guaranteed).
The existing unit tests should be sufficient.
This switches the Merkle tree logic for blocks to one that runs in constant (small) space.
The old code is moved to tests, and a new test is added that for various combinations of
block sizes, transaction positions to compute a branch for, and mutations:
* Verifies that the old code and new code agree for the Merkle root.
* Verifies that the old code and new code agree for the Merkle branch.
* Verifies that the computed Merkle branch is valid.
* Verifies that mutations don't change the Merkle root.
* Verifies that mutations are correctly detected.
This makes sure that retransmits by a whitelisted peer also actually
result in a retransmit.
Further, this changes the logic to never relay in case we would assign
a DoS score, as we expect to get DoS banned ourselves as a result.
Previously peers which implement a protocol version less than NO_BLOOM_VERSION
would not be disconnected for sending a filter command, regardless of the
peerbloomfilter option.
Many node operators do not wish to provide expensive bloom filtering for SPV
clients, previously they had to cherry pick the commit which enabled the
disconnect logic.
The default should remain false until a sufficient percent of SPV clients
have updated.
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
The setAskFor duplicate elimination was too eager and removed entries
when we still had no getdata response, allowing the peer to keep
INVing and not responding.
mapAlreadyAskedFor does not keep track of which peer has a request queued for a
particular tx. As a result, a peer can blind a node to a tx indefinitely by
sending many invs for the same tx, and then never replying to getdatas for it.
Each inv received will be placed 2 minutes farther back in mapAlreadyAskedFor,
so a short message containing 10 invs would render that tx unavailable for 20
minutes.
This is fixed by disallowing a peer from having more than one entry for a
particular inv in mapAlreadyAskedFor at a time.
80ae230 Improve log messages for blocks only violations. (Patick Strateman)
08843ed Add relaytxes status to getpeerinfo (Peter Todd)
d8aaa51 Bail early in processing transactions in blocks only mode. (Patick Strateman)
3587f6a Fix relay mechanism for whitelisted peers under blocks only mode. (Patick Strateman)
6531f17 Add mediantime field to getblock and getblockheader (Peter Todd)
7259769 Document new mediantime field in getblockchaininfo (Peter Todd)
c277a63 Clarify nLockTime-by-time comment in CheckFinalTx() (Peter Todd)
748321e Add mediantime field to getblockchaininfo RPC call (Peter Todd)
Previously in blocks only mode all inv messages where type!=MSG_BLOCK would be
rejected without regard for whitelisting or whitelistalwaysrelay.
As such whitelisted peers would never send the transaction (which would be
processed).
Compute the value of inputs that already are in the chain at time of mempool entry and only increase priority due to aging for those inputs. This effectively changes the CTxMemPoolEntry's GetPriority calculation from an upper bound to a lower bound.
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
It's possible coins with the same hash exist when you create a duplicate coinbase, so previously we were reading from the database to make sure we had the old coins cached so if we were to spend the new ones, the old ones would also be spent. This pull instead just marks the new coins as not fresh if they are from a coinbase, so if they are spent they will be written all the way down to the database anyway overwriting any duplicates.
1cf3dd8 Add unit test for UpdateCoins (Alex Morcos)
03c8282 Make CCoinsViewTest behave like CCoinsViewDB (Alex Morcos)
14470f9 ModifyNewCoins saves database lookups (Alex Morcos)
bbf49da Fix comment for blocksonly parameter interactions (Patick Strateman)
6a4982f Fix fRelayTxs comment (Patick Strateman)
59441a0 Display DEFAULT_WHITELISTALWAYSRELAY in help text (Patick Strateman)
71a2683 Use DEFAULT_BLOCKSONLY and DEFAULT_WHITELISTALWAYSRELAY constants (Patick Strateman)
762b13b Add help text for blocksonly and whitelistalwaysrelay (Patick Strateman)
3a96497 Add whitelistalwaysrelay option (Patick Strateman)
420fa81 Do not process tx inv's in blocksonly mode (Patick Strateman)
4044f07 Add blocksonly mode (Patick Strateman)
58ef0ff doc: update docs for Tor listening (Wladimir J. van der Laan)
68ccdc4 doc: Mention Tor listening in release notes (Wladimir J. van der Laan)
09c1ae1 torcontrol improvements and fixes (Wladimir J. van der Laan)
2f796e5 Better error message if Tor version too old (Peter Todd)
8f4e67f net: Automatically create hidden service, listen on Tor (Wladimir J. van der Laan)
69d373f Don't wipe the sigcache in TestBlockValidity (Pieter Wuille)
0b9e9dc Evict sigcache entries that are seen in a block (Pieter Wuille)
830e3f3 Make sigcache faster and more efficient (Pieter Wuille)
Previously all conflicting transactions were evaluated as a whole to
determine if the feerate was being increased. This meant that low
feerate children pulled the feerate down, potentially allowing a high
transaction with a high feerate to be replaced by one with a lower
feerate.
Replaces transactions already in the mempool if a new transaction seen
with a higher fee, specifically both a higher fee per KB and a higher
absolute fee. Children are evaluateed for replacement as well, using the
mempool package tracking to calculate replaced fees/size. Transactions
can opt-out of transaction replacement by setting nSequence >= maxint-1
on all inputs. (which all wallets do already)
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
Process `getheaders` messages from whitelisted peers even if we are in
initial block download. Whitelisted peers can always use a node as a
block source.
Also log a debug message when the request is ignored, for
troubleshooting.
Fixes#6971.
d1c3762 Revert "Revert "Enable policy enforcing GetMedianTimePast as the end point of lock-time constraints"" (Gregory Maxwell)
e4e5334 Restore MedianTimePast for locktime. (Gregory Maxwell)
Previously, the undo weren't being flushed during a reindex because
fKnown was set to true in FindBlockPos. That is the correct behaviour
for block files as they aren't being touched, but undo files are
touched.
This changes the behaviour to always flush when switching to a new file
(even for block files, though that isn't really necessary).
Revert "Revert "Add rules--presently disabled--for using GetMedianTimePast as endpoint for lock-time calculations""
This reverts commit 40cd32e835.
After careful analysis it was determined that the change was, in fact, safe and several people were suffering
momentary confusion about locktime semantics.
When processing a new transaction, in addition to spending the Coins of its txin's it creates a new Coins for its outputs. The existing ModifyCoins function will first make sure this Coins does not already exist. It can not exist due to BIP 30, but because of that the lookup can't be cached and always has to go to the database. Since we are creating the coins to match the new tx anyway, there is no point in checking if they exist first anyway. However this should not be used for coinbase tx's in order to preserve the historical behavior of overwriting the two existing duplicate tx pairs.
This reverts commit 9d55050773.
As noted by Luke-Jr, under some conditions this will accept transactions which are invalid by the network
rules. This happens when the current block time is head of the median time past and a transaction's
locktime is in the middle.
This could be addressed by changing the rule to MAX(this_block_time, MTP+offset) but this solution and
the particular offset used deserve some consideration.
* -maxuploadtarget can be set in MiB
* if <limit> - ( time-left-in-24h-cycle / 600 * MAX_BLOCK_SIZE ) has reach, stop serve blocks older than one week and filtered blocks
* no action if limit has reached, no guarantee that the target will not be surpassed
* add outbound limit informations to rpc getnettotals
The lock-time code currently uses CBlock::nTime as the cutoff point for time based locked transactions. This has the unfortunate outcome of creating a perverse incentive for miners to lie about the time of a block in order to collect more fees by including transactions that by wall clock determination have not yet matured. By using CBlockIndex::GetMedianTimePast from the prior block instead, the self-interested miner no longer gains from generating blocks with fraudulent timestamps. Users can compensate for this change by simply adding an hour (3600 seconds) to their time-based lock times.
If enforced, this would be a soft-fork change. This commit only adds the functionality on an unexecuted code path, without changing the behaviour of Bitcoin Core.
