- it was bad, that quite some messages were just talking about a database,
I think a user should know, if we are talking about wallet db or
block/coin db
- also adds a new init message for "Verifying block database integrity..."
- this pull adds an InitMessage() function to noui.cpp, which outputs init
messages to debug.log (this allows to remove some printf() calls from
init.cpp)
- change InitMessage() in bitcoin.cpp to also write init messages to
debug.log to ensure nothting is missing in the log because of the
removal of printf() calls in init.cpp
* During block verification (when parallelism is requested), script
check actions are stored instead of being executed immediately.
* After every processed transactions, its signature actions are
pushed to a CScriptCheckQueue, which maintains a queue and some
synchronization mechanism.
* Two or more threads (if enabled) start processing elements from
this queue,
* When the block connection code is finished processing transactions,
it joins the worker pool until the queue is empty.
As cs_main is held the entire time, and all verification must be
finished before the block continues processing, this does not reach
the best possible performance. It is a less drastic change than
some more advanced mechanisms (like doing verification out-of-band
entirely, and rolling back blocks when a failure is detected).
The -par=N flag controls the number of threads (1-16). 0 means auto,
and is the default.
-checklevel gets a new meaning:
0: verify blocks can be read from disk (like before)
1: verify (contextless) block validity (like before)
2: verify undo files can be read and have good checksums
3: verify coin database is consistent with the last few blocks
(close to level 6 before)
4: verify all validity rules of the last few blocks
Level 3 is the new default, as it's reasonably fast. As level 3 and
4 are implemented using an in-memory rollback of the database, they
are limited to as many blocks as possible without exceeding the
limits set by -dbcache. The default of -dbcache=25 allows for some
150-200 blocks to be rolled back.
In case an error is found, the application quits with a message
instructing the user to restart with -reindex. Better instructions,
and automatic recovery (when possible) or automatic reindexing are
left as future work.
When the coin database is out of date with the block database, the
best block in it is automatically switched to. This reconnection
process can take time, so allow it to be interrupted.
This also stops block connection as soon as shutdown is requested,
leading to a faster shutdown.
- fix ThreadSafeMessageBox always displays error icon
- allow to specify MSG_ERROR / MSG_WARNING or MSG_INFORMATION without a
custom caption / title
- allow to specify CClientUIInterface::ICON_ERROR / ICON_WARNING and
ICON_INFORMATION (which is default) as message box icon
- remove CClientUIInterface::OK from ThreadSafeMessageBox-calls, as
the OK button will be set as default, if none is specified
- prepend "Bitcoin - " to used captions
- rename BitcoinGUI::error() -> BitcoinGUI::message() and add function
documentation
- change all style parameters and enum flags to unsigned
- update code to use that new API
- update Client- and WalletModel to use new BitcoinGUI::message() and
rename the classes error() method into message()
- include the possibility to supply the wanted icon for messages from
Client- and WalletModel via "style" parameter
- this allows the client to listen on via -bind specified addresses
(e.g. 127.0.0.1), even when a network (IPv4 in that case) was blocked
via e.g -onlynet="Tor"
- introduce enum BindFlags to avoid passing multiple bools to Bind()
- make -bind help text clear we ALWAYS listen on the specified address
- remove an unused variable
- remove 2 unneeded IsLimited() checks before calling Bind(), which does
these checks anyway
- usage case: specify -bind=127.0.0.1 -onlynet="Tor" to allow incoming
connections to a Tor hidden service, but still don't allow other IPv4
nodes to connect / get connected
Flushes the blktree/ and coins/ databases, and reindexes the
block chain files, as if their contents was loaded via -loadblock.
Based on earlier work by Jeff Garzik.
As the coinset data refers to the best block, stored in the block
tree. Flushing the coin set first can cause inconsistencies if
the process gets killed in between.
Split off CBlockTreeDB and CCoinsViewDB into txdb-*.{cpp,h} files,
implemented by either LevelDB or BDB.
Based on code from earlier commits by Mike Hearn in his leveldb
branch.
Given that the block tree database (chain.dat) and the active chain
database (coins.dat) are entirely separate now, it becomes legal to
swap one with another instance without affecting the other.
This commit introduces a check in the startup code that detects the
presence of a better chain in chain.dat that has not been activated
yet, and does so efficiently (in batch, while reusing the blk???.dat
files).
During the initial block download (or -loadblock), delay connection
of new blocks a bit, and perform them in a single action. This reduces
the load on the database engine, as subsequent blocks often update an
earlier block's transaction already.
This switches bitcoin's transaction/block verification logic to use a
"coin database", which contains all unredeemed transaction output scripts,
amounts and heights.
The name ultraprune comes from the fact that instead of a full transaction
index, we only (need to) keep an index with unspent outputs. For now, the
blocks themselves are kept as usual, although they are only necessary for
serving, rescanning and reorganizing.
The basic datastructures are CCoins (representing the coins of a single
transaction), and CCoinsView (representing a state of the coins database).
There are several implementations for CCoinsView. A dummy, one backed by
the coins database (coins.dat), one backed by the memory pool, and one
that adds a cache on top of it. FetchInputs, ConnectInputs, ConnectBlock,
DisconnectBlock, ... now operate on a generic CCoinsView.
The block switching logic now builds a single cached CCoinsView with
changes to be committed to the database before any changes are made.
This means no uncommitted changes are ever read from the database, and
should ease the transition to another database layer which does not
support transactions (but does support atomic writes), like LevelDB.
For the getrawtransaction() RPC call, access to a txid-to-disk index
would be preferable. As this index is not necessary or even useful
for any other part of the implementation, it is not provided. Instead,
getrawtransaction() uses the coin database to find the block height,
and then scans that block to find the requested transaction. This is
slow, but should suffice for debug purposes.
Corrupt wallets used to cause a DB_RUNRECOVERY uncaught exception and a
crash. This commit does three things:
1) Runs a BDB verify early in the startup process, and if there is a
low-level problem with the database:
+ Moves the bad wallet.dat to wallet.timestamp.bak
+ Runs a 'salvage' operation to get key/value pairs, and
writes them to a new wallet.dat
+ Continues with startup.
2) Much more tolerant of serialization errors. All errors in deserialization
are reported by tolerated EXCEPT for errors related to reading keypairs
or master key records-- those are reported and then shut down, so the user
can get help (or recover from a backup).
3) Adds a new -salvagewallet option, which:
+ Moves the wallet.dat to wallet.timestamp.bak
+ extracts ONLY keypairs and master keys into a new wallet.dat
+ soft-sets -rescan, to recreate transaction history
This was tested by randomly corrupting testnet wallets using a little
python script I wrote (https://gist.github.com/3812689)
Before, opening a -datadir that was created with a new
version of Berkeley DB would result in an un-caught DB_RUNRECOVERY
exception.
After these changes, the error is caught and the user is told
that there is a problem and is told how to try to recover from
it.
Before, opening a -datadir that was created with a new
version of Berkeley DB would result in an un-caught DB_RUNRECOVERY
exception.
After these changes, the error is caught and the user is told
that there is a problem and is told how to try to recover from
it.
This allows fun stuff such as `bitcoin --help | less`, and more
easy piping to files.
Looking at other tools such as bash, gcc, they all send their help
text to stdout.
- this enables DEP on all Windows version which support the
SetProcessDEPPolicy() call in Kernel32.dll
- use a dynamic approach via GetProcAddress() to not rely on headers or
compiler libs
- this is the same way the Tor-project does it
- ensure warnings always start with "Warning:" and that the first
character after ":" is written uppercase
- ensure the first sentence in warnings ends with an "!"
- remove unneeded spaces from Warning-strings
- add missing Warning-string translation
- remove a "\n" and replace with untranslatable "<br><br>"
- place "-?" option at first
- re-work description and "\n" usage for Gavins new block creation options
to better match current description syntax
- ensure no "\n" is in translated strings, which is better for Transifex
Modify CreateNewBlock so that instead of processing all transactions
in priority order, process the first 27K of transactions in
priority order and then process the rest in fee-per-kilobyte
order.
This is the first, minimal step towards better a better fee-handling
system for both miners and end-users; this patch should be easy
to backport to the old versions of Bitcoin, and accomplishes the
most important goal-- allow users to "buy their way in" to blocks
using transaction fees.
NOTE: These thread names are visible in gdb when using 'info threads'.
Additionally both 'top' and 'ps' show these names *unless* told to
display the command-line instead of task name.
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Useful for developers who need to refer to futher back in debug.log history, but who don't want to
enable the -debug option and all the verbosity that comes with that.
Prior to this change, each TX typically generated 3+ debug messages,
askfor tx 8644cc97480ba1537214 0
sending getdata: tx 8644cc97480ba1537214
askfor tx 8644cc97480ba1537214 1339640761000000
askfor tx 8644cc97480ba1537214 1339640881000000
CTxMemPool::accept() : accepted 8644cc9748 (poolsz 6857)
After this change, there is only one message for each valid TX received
CTxMemPool::accept() : accepted 22a73c5d8c (poolsz 42)
and two messages for each orphan tx received
ERROR: FetchInputs() : 673dc195aa mempool Tx prev not found 1e439346fc
stored orphan tx 673dc195aa (mapsz 19)
The -debugnet option, or its superset -debug, will restore the full debug
output.
This introduces internal types:
* CKeyID: reference (hash160) of a key
* CScriptID: reference (hash160) of a script
* CTxDestination: a boost::variant of the former two
CBitcoinAddress is retrofitted to be a Base58 encoding of a
CTxDestination. This allows all internal code to only use the
internal types, and only have RPC and GUI depend on the base58 code.
Furthermore, the header dependencies are a lot saner now. base58.h is
at the top (right below rpc and gui) instead of at the bottom. For the
rest: wallet -> script -> keystore -> key. Only keystore still requires
a forward declaration of CScript. Solving that would require splitting
script into two layers.
- Signals now go directly from the core to WalletModel/ClientModel.
- WalletModel subscribes to signals on CWallet: Prepares for multi-wallet support, by no longer assuming an implicit global wallet.
- Gets rid of noui.cpp, the few lines that were left are merged into init.cpp
- Rename wxXXX message flags to MF_XXX, to make them UI indifferent.
- ThreadSafeMessageBox no longer returns the value `4` which was never used, converted to void.
Cleans up and organizes several scattered functions and variables related to
the BDB env. Class CDBInit() existed to provide a
guaranteed-via-C++-destructor cleanup of the db environment.
A formal CDBEnv class provides all of this inside a single wrapper.
The best log rotation method formerly available was to configure
logrotate with the copytruncate option. As described in the logrotate
documentation, "there is a very small time slice between copying the
file and truncating it, so some logging data might be lost".
By sending SIGHUP to the server process, one can now reopen the debug
log file without losing any data.
- Solves #1278, attempts to address #1049
- Removes \t's from help message that are removed afterwards anyway
- Moves UI-specific command-line options help to UI code
- Moves "-detachdb" out of #ifdef USE_UPNP
-externalip=<ip> can be used to explicitly set the public IP address
of your node. -discover=0 can be used to disable the automatic public
IP discovery system.
Add an option -detachdb (and entry in OptionDialog), without which no
lsn_reset is called on addr.dat and blkindex.dat. That means these
files cannot be moved to a new environment, but shutdown can be
significantly faster. The wallet file is always lsn_reset'ed.
-detachdb corresponds to the old behaviour, though it is off by
default now to speed up shutdowns.
This commit removes the dependency of serialize.h on PROTOCOL_VERSION,
and makes this parameter required instead of implicit. This is much saner,
as it makes the places where changing a version number can have an
influence obvious.
Where possible, use boost::filesystem::path instead of std::string or
char* for filenames. This avoids a lot of manual string tinkering, in
favor of path::operator/.
GetDataDir is also reworked significantly, it now only keeps two cached
directory names (the network-specific data dir, and the root data dir),
which are decided through a parameter instead of pre-initialized global
variables.
Finally, remove the "upgrade from 0.1.5" case where a debug.log in the
current directory has to be removed.
All client version information is moved to version.cpp, which optionally
(-DHAVE_BUILD_INFO) includes build.h. build.h is automatically generated
on supporting platforms via contrib/genbuild.sh, using git describe.
The git export-subst attribute is used to put the commit id statically
in version.cpp inside generated archives, and this value is used if no
build.h is present.
The gitian descriptors are modified to use git archive instead of a
copy, to create the src/ directory in the output. This way,
src/src/version.cpp will contain the static commit id. To prevent
gitian builds from getting the "-dirty" marker in their git-describe
generated identifiers, no touching of files or running sed on the
makefile is performed anymore. This does not seem to influence
determinism.
- rename wxMessageBox, remove redundant arguments to noui/qtui calls
- also, add flag to force blocking, modal dialog box for disk space warning etc
- clarify function naming
- no more special MessageBox needed from AppInit2, as window object is created before calling AppInit2
Do not automatically change the wallet format unless the user takes an
explicit action that implies an upgrade (encrypting, for now), or uses
-walletupgrade.
-walletupgrade optionally takes an integer argument: the client version
up to which upgrading is allowed. Without an argument, it is upgraded
to latest supported version. If an argument to -walletupgrade is
provided at the time the wallet is created, the new wallet will initially
not use features beyond that version.
Third, the current wallet version number is reported in getinfo.
-checkblocks now takes a numeric argument: the number of blocks that must
be verified at the end of the chain. Default is 2500, and 0 means all
blocks.
-checklevel specifies how thorough the verification must be:
0: only check whether the block exists on disk
1: verify block validity (default)
2: verify transaction index validity
3: check transaction hashes
4: check whether spent txouts were spent within the main chain
5: check whether all prevouts are marked spent
6: check whether spent txouts were spent by a valid transaction that consumes them
Design goals:
* Only keep a limited number of addresses around, so that addr.dat does not grow without bound.
* Keep the address tables in-memory, and occasionally write the table to addr.dat.
* Make sure no (localized) attacker can fill the entire table with his nodes/addresses.
See comments in addrman.h for more detailed information.
This introduces CNetAddr and CService, respectively wrapping an
(IPv6) IP address and an IP+port combination. This functionality used
to be part of CAddress, which also contains network flags and
connection attempt information. These extra fields are however not
always necessary.
These classes, along with logic for creating connections and doing
name lookups, are moved to netbase.{h,cpp}, which does not depend on
headers.h.
Furthermore, CNetAddr is mostly IPv6-ready, though IPv6
functionality is not yet enabled for the application itself.
Replaced all occurrences of #if* __WXMSW__ with WIN32,
and all occurrences of __WXMAC_OSX__ with MAC_OSX, and made
sure those are defined appropriately in the makefile and bitcoin-qt.pro.
Makefiles now build bitcoind only.
qmake/make in top-level directory is used to build Bitcoin QT
Deleted almost all #ifdef GUI from the code (left one possibly controversial one)
Deleted xpm/ files.
* A new class CKeyStore manages private keys, and script.cpp depends on access to CKeyStore.
* A new class CWallet extends CKeyStore, and contains all former wallet-specific globals; CWallet depends on script.cpp, not the other way around.
* Wallet-specific functions in CTransaction/CTxIn/CTxOut (GetDebit, GetCredit, GetChange, IsMine, IsFromMe), are moved to CWallet, taking their former 'this' argument as an explicit parameter
* CWalletTx objects know which CWallet they belong to, for convenience, so they have their own direct (and caching) GetDebit/... functions.
* Some code was moved from CWalletDB to CWallet, such as handling of reserve keys.
* Main.cpp keeps a set of all 'registered' wallets, which should be informed about updates to the block chain, and does not have any notion about any 'main' wallet. Function in main.cpp that require a wallet (such as GenerateCoins), take an explicit CWallet* argument.
* The actual CWallet instance used by the application is defined in init.cpp as "CWallet* pwalletMain". rpc.cpp and ui.cpp use this variable.
* Functions in main.cpp and db.cpp that are not used by other modules are marked static.
* The code for handling the 'submitorder' message is removed, as it not really compatible with the idea that a node is independent from the wallet(s) connected to it, and obsolete anyway.
Use non-blocking connects, and a select() call to wait a predefined
time (5s by default, but configurable with -timeout) for either
success or failure. This allows much more connections to be tried
per time unit.
Based on a patch by phantomcircuit.
When rescanning, if the scanned transaction is already in the wallet, it
is skipped. However, if someone sends a transaction, does not wait for
confirmation, switches wallets, waits for a block that contains his original
transaction, and switches wallets again, a rescan will leave his wallet
transaction (which has no merkle branch, so no confirmations) untouched.
* A new option -dns is introduced that enables name lookups in
-connect and -addnode, which is not enabled by default,
as it may be considered a security issue.
* A Lookup function is added that supports retrieving one or
more addresses based on a host name
* CAddress constructors (optionally) support name lookups.
* The different places in the source code that did name lookups
are refactored to use NameLookup or CAddress instead (dns seeding,
irc server lookup, getexternalip, ...).
* Removed ToStringLog() from CAddress, and switched to ToString(),
since it was empty.
there is no internal modification of any file in this commit
files are moved into directories according to established standards in
sourcecode distribution; these directories contain:
src - Files that are used in constructing the executable binaries,
but are not installed.
doc - Files in HTML and text format that document usage, quirks of
the implementation, and contributor checklists.
locale - Files that contain human language translation of strings
used in the program
contrib - Files contributed from distributions or other third party
implementing scripts and auxiliary programs
