3fe836b78d [moveonly] Extract RescanWallet to handle a simple rescan (Ben Woosley)
Pull request description:
Where the outcome does not depend on the result, apart from a simple
success check.
Tree-SHA512: e0d29c6fc0c7f99a730289e5a80deb586b2848aead56b5198a71ef01f65374812468dfd57be0b8b076eb9be4090d5101d28d979a1d5c3d2f1caeca77b303e90e
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
Because false is synonymous with TX_NONSTANDARD, this conveys the same
information and makes the handling explicitly based on script type,
simplifying each call site.
Prior to this change it was common for the return value to be ignored,
or for the return value and TX_NONSTANDARD to be redundantly handled.
This is a squashed commit that squashes the following commits:
This commit removes the `boost/algorithm/string/predicate.hpp` dependenc
from the project by replacing the function calls to `boost::algorithm::starts_with`
`boost::algorithm::ends_with` and `all` with respectively C++11'
`std::basic_string::front`, `std::basic_string::back`, `std::all_of` function calls
This commit replaces `boost::algorithm::is_digit` with a locale independent isdigi
function, because the use of the standard library's `isdigit` and `std::isdigit
functions is discoraged in the developer notes
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
27ee53c1ae wallet: Add error handling. Check return value of ParseUInt32(...) in ParseHDKeypath(...). (practicalswift)
7223263899 wallet: Add tests for ParseHDKeypath(...) (practicalswift)
Pull request description:
Add error handling. Check return value of `ParseUInt32(...)` in `ParseHDKeypath(...)`.
`ParseUInt32(...)` returns `false` if the entire string could not be parsed or when an overflow or underflow occurred. In such case the uninitialized variable `number` would be used in the calculation of `path` (prior to this commit).
An example key path triggering this is `m/0/4294967296`:
```
ParseHDKeypath("m/0/4294967296", keypath);
```
`4294967296` is `1` + `0xFFFFFFFF` (`uint32_t` max: `4294967295`).
Introduced in a4b06fb42e which was merged into `master` 14 hours ago as part of #13557 ("BIP 174 PSBT Serializations and RPCs").
Tree-SHA512: e5ff423f67c18d82c1231bde6343587a453e793c32004d93dc9b61be6d9372b57a6b2c9978d9eb1000d6cc82fd180f2486013f928dca737fb92daad22c16e467
2c71edc2fc [wallet] [rpc] Fix importaddress help text (John Newbery)
Pull request description:
Help text for `importaddress` referred to the first parameter as `script`, when in fact it's `address`. Calling with a script argument fails:
```
→ bcli -named importaddress script=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
error code: -8
error message:
Unknown named parameter script
→ bcli -named importaddress address=2N3qhMpHK8WNo7wv87W9eHMgvGyJU1593Ei
# success!
```
Tree-SHA512: 24dcb2cbd0a43e25896b1c67fa0386df2453ec04d49a339e10992417b3921ce3df8a6aa5abba7d2237d6188b018948b2a21ea2f04d37120ad36c31c7b7fc9f1c
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
020628e3a4 Tests for PSBT (Andrew Chow)
a4b06fb42e Create wallet RPCs for PSBT (Andrew Chow)
c27fe419ef Create utility RPCs for PSBT (Andrew Chow)
8b5ef27937 SignPSBTInput wrapper function (Andrew Chow)
58a8e28918 Refactor transaction creation and transaction funding logic (Andrew Chow)
e9d86a43ad Methods for interacting with PSBT structs (Andrew Chow)
12bcc64f27 Add pubkeys and whether input was witness to SignatureData (Andrew Chow)
41c607f09b Implement PSBT Structures and un/serialization methods per BIP 174 (Andrew Chow)
Pull request description:
This Pull Request fully implements the [updated](https://github.com/bitcoin/bips/pull/694) BIP 174 specification. It is based upon #13425 which implements the majority of the signing logic.
BIP 174 specifies a binary transaction format which contains the information necessary for a signer to produce signatures for the transaction and holds the signatures for an input while the input does not have a complete set of signatures.
This PR contains structs for PSBT, serialization, and deserialzation code. Some changes to `SignatureData` have been made to support detection of UTXO type and storing public keys.
***
Many RPCs have been added to handle PSBTs.
`walletprocesspsbt` takes a PSBT format transaction, updates the PSBT with any inputs related to this wallet, signs, and finalizes the transaction. There is also an option to not sign and just update.
`walletcreatefundedpsbt` creates a PSBT from user provided data in the same form as createrawtransaction. It also funds the transaction and takes an options argument in the same form as `fundrawtransaction`. The resulting PSBT is blank with no input or output data filled in. It is analogous to a combination of `createrawtransaction` and `fundrawtransaction`
`decodepsbt` takes a PSBT and decodes it to JSON. It is analogous to `decoderawtransaction`
`combinepsbt` takes multiple PSBTs for the same tx and combines them. It is analogous to `combinerawtransaction`
`finalizepsbt` takes a PSBT and finalizes the inputs. If all inputs are final, it extracts the network serialized transaction and returns that instead of a PSBT unless instructed otherwise.
`createpsbt` is like `createrawtransaction` but for PSBTs instead of raw transactions.
`convertpsbt` takes a network serialized transaction and converts it into a psbt. The resulting psbt will lose all signature data and an explicit flag must be set to allow transactions with signature data to be converted.
***
This supersedes #12136
Tree-SHA512: 1ac7a79e5bc669933f0a6fcc93ded55263fdde9e8c144a30266b13ef9f62aacf43edd4cbca1ffbe003090b067e9643c9298c79be69d7c1b10231b32acafb6338
Added functional tests for PSBT that test the RPCs. Also added all
of the BIP 174 test vectors (except for the updater tests) in the
functional tests.
Added a Unit test for the BIP 174 updater test vector.
walletprocesspsbt takes a PSBT format transaction, updates the
PSBT with any inputs related to this wallet, signs, and finalizes
the transaction. There is also an option to not sign and just
update.
walletcreatefundedpsbt creates a PSBT from user provided data
in the same form as createrawtransaction. It also funds the transaction
and takes an options argument in the same form as fundrawtransaction.
The resulting PSBT is blank with no input or output data filled
in.
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
backupwallet was broken for multiwallets in their own directories
(i.e. something like DATADIR/wallets/mywallet/wallet.dat). In this
case, the backup would use DATADIR/wallets/wallet.dat as source file
and not take the specific wallet's directory into account.
This led to either an error during the backup (if the wrong source
file was not present) or would silently back up the wrong wallet;
especially the latter behaviour can be quite bad for users.
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
702ae1e21a [RPC] [wallet] allow getbalance to use min_conf and watch_only without accounts. (John Newbery)
cf15761f6d [wallet] GetBalance can take a min_depth argument. (John Newbery)
0f3d6e9ab7 [wallet] factor out GetAvailableWatchOnlyBalance() (John Newbery)
7110c830f8 [wallet] deduplicate GetAvailableCredit logic (John Newbery)
ef7bc8893c [wallet] Factor out GetWatchOnlyBalance() (John Newbery)
4279da4785 [wallet] GetBalance can take an isminefilter filter. (John Newbery)
Pull request description:
#12953 inadvertently removed the functionality to call `getbalance "*" <int> <bool>` to get the wallet's balance with either minconfs or include_watchonly.
This restores that functionality (when `-deprecatedrpc=accounts`), and also makes it possible to call ``getbalance minconf=<int> include_watchonly=<bool>` when accounts are not being used.
Tree-SHA512: 67e84de9291ed6d34b23c626f4dc5988ba0ae6c99708d02b87dd3aaad3f4b6baa6202a66cc2dadd30dd993a39de8036ee920fcaa8cbb1c5dfe606e6fac183344
3c292cc19 ScanforWalletTransactions should mark input txns as dirty (Gregory Sanders)
Pull request description:
I'm hitting a corner case in my mainnet wallet where I load a restore a wallet, call `rescanblockchain` from RPC, and it's "double counting" an output I've sent to myself since currently it never marks input transactions as dirty. This is fixed by a restart of the wallet.
Note that this only happens with keys with birthdate *after* the blocks containing the spent funds which gets scanned on startup, so it's hard to test without a set seed function.
Tree-SHA512: ee1fa152bb054b57ab4c734e355df10d241181e0372c81d583be61678fffbabe5ae60b09b05dc1bbbcfb4838df9d8538791d4c1d80a09b84d78ad2f50dcb0a61
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input hashTx
rather than the current now tx.
d0b9405f96 Refactors `keystore.h` type aliases. (251)
Pull request description:
This pull request frees `keystore.h` from type alias declarations that have been declared at file scope level.
`keystore.h` has various type aliases that have been declared ~3 - 6 years ago at file scope level, which can either be encapsulated or removed.
Where type alias declarations are encapsulated at the appropriate scope and access level, C++11's `using` notation is used in favor of the `typedef` notation.
Tree-SHA512: 1395cdc63e0c7ff5a1b1721675ad4416f71f507e999bd4ba019f03457cbfc08877848f10a8db7f5ccd2cd5ca3f5a291c986616f7703172fb6d79fba7447ffba8
075429a482 Use common SetDataDir method to create temp directory in tests. (winder)
Pull request description:
Took a stab at #12574
Created a `getPath` method which can be used with the `TestingSetup` fixture to create a temp directory. Updated tests using temp directories to use this method.
I tried setting up a `BOOST_GLOBAL_FIXTURE` to create a truly global path for all tests but was getting linker errors when including `boost/test/unit_test.hpp` in `test_bitcoin.cpp`. Even if I had gotten the linking to work, it looks like `make check` invokes the test binary a bunch of times, so it may not have worked anyway.
Tree-SHA512: b51d0f5fada5d652ccc9362596cf98a742aa47f5daf94f189b5f034d8c035c85d095377befdcff7fb4247154d5160e8c500d70f554a2158e2c185a9d24f694f1
This squashed commit either encapsulates type alias declarations at the appropriate scope; or removes type aliases that are not used.
The encapsulated type aliases are declared using C++11's `using` notation in favor of the `typedef` notation.
I thought we had removed this a long time ago, TBH, its really
confusing feedback to users that we display whether a tx was
broadcast to immediate neighbor nodes, given that has little
indication of whether the tx propagated very far.
Makes AddAndGetDestinationForScript use a generic CKeyStore rather than
the wallet, and makes it always add the script to the keystore, rather
than only adding related (redeem) scripts.
ea65182f03 [wallet] loadwallet shouldn't create new wallets. (John Newbery)
Pull request description:
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
Tree-SHA512: 0a59fa8a33fde51a88544ad288b00e4995284fe16424f643076aaba42b8244fff362145217650ee53d518dfab7efbed4237632c34cdd3dcbbecaa9ecaab5fd7b
2f1a30c63 Fix MAX_STANDARD_TX_WEIGHT check (Johnson Lau)
Pull request description:
As suggested by the constant name and its comment in policy.h, a transaction with a weight of exactly MAX_STANDARD_TX_WEIGHT should be allowed. Users could be confused.
Tree-SHA512: af417de1c6a2e6796ebbb39aa0caad8764302ded155cb1bbfbe457e4567c199cc53256189832b17d4aeec369e190b3edd4c6116d5f0b8cf0ede6dfb4ed83bdd3
1fabd59e7 Break circular dependency: init -> * -> init by extracting shutdown.h (Ben Woosley)
e62fdfeea Drop unused init.h includes (Ben Woosley)
Pull request description:
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown api functions, including the new `CancelShutdown` for setting it to `false`.
Tree-SHA512: df42f75dfbba163576710e9a67cf1228531fd99d70a2f187bfba0bcc476d6749cf88180a97e66a81bb5b6c3c7f0917de7402d26039ba7b644cb7509b02f7e267
bb582a59c Add P2WSH destination helper and use it instead of manual hashing (Pieter Wuille)
eaba1c111 Add additional unit tests for invalid IsMine combinations (Pieter Wuille)
e6b9730c4 Do not expose invalidity from IsMine (Pieter Wuille)
Pull request description:
This improves the handling of INVALID in IsMine:
* Extra INVALID conditions were added to `IsMine` (following https://github.com/bitcoin/bitcoin/pull/13142/files#r185349057), but these were untested. Add unit tests for them.
* In https://github.com/bitcoin/bitcoin/pull/13142#issuecomment-386396975 it was suggested to merge `isInvalid` into the return status. This PR takes a different approach, and removes the `isInvalid` entirely. It was only ever used inside tests, as normal users of IsMine don't care about the reason for non-mine-ness, only whether it is or not. As the unit tests are extensive enough, it seems sufficient to have a black box text (with tests for both compressed and uncompressed keys).
Some addition code simplification is done as well.
Tree-SHA512: 3267f8846f3fa4e994f57504b155b0e1bbdf13808c4c04dab7c6886c2c0b88716169cee9c5b350513297e0ca2a00812e3401acf30ac9cde5d892f9fb59ad7fef
A bug in the initial implementation of loadwallet meant that if the
arguement was a directory that didn't contain a wallet.dat file, a new
wallet would be created in that directory. Fix that so that if a
directory is passed in, it must contain a wallet.dat file.
Bug reported by promag (João Barbosa).
df10f07db1 [wallet] Don't use accounts when checking balance in sendmany (John Newbery)
e209184101 [wallet] deprecate sendfrom RPC method. (John Newbery)
Pull request description:
A couple of fixups from the accounts API deprecation PR (#12953):
- properly deprecate `sendfrom`
- don't use accounts when calculating balance in `sendmany` (unless the `-deprecatedrpc=accounts` flag is being used)
Tree-SHA512: 1befde055067438c4c3391bbff1aaed0e6249efd708c567db3f1faad40a0f28e64f95e5bad0679ae826d24a0239e4bc8a1c392dc93e2e7502343a7f6b1d1845c
3f72d04e29 Fix parameter count check for importpubkey. (Kristaps Kaupe)
Pull request description:
Found this while working on #13464. Parameter count check for `importpubkey` was wrong.
Tree-SHA512: aba41b666c6493379f320be5e3e438a6cad1a96429102ff4428c092c48f29c2eead2195792c0b018296f20e1c42eb091dd5b9886c42cecbb1f0d03d5def14705
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown
api functions, including the new `AbortShutdown` for setting it to `false`.
Note I originally called `AbortShutdown` `CancelShutdown` but that name was
already taken by winuser.h
https://travis-ci.org/bitcoin/bitcoin/jobs/386913329
This change also triggered a build error in bench. Fixing it required moving LIBBITCOIN_SERVER after LIBBITCOIN_WALLET in bench_bench_bitcoin_LDADD To make
server definitions in src/net.cpp available to wallet methods in
src/wallet/wallet.cpp. Specifically, solving:
libbitcoin_wallet.a(libbitcoin_wallet_a-wallet.o): In function `CWalletTx::RelayWalletTransaction(CConnman*)':
wallet.cpp:(.text+0x3f0e): undefined reference to `CConnman::NodeFullyConnected(CNode const*)'
collect2: error: ld returned 1 exit status
https://travis-ci.org/bitcoin/bitcoin/jobs/392133581
Need for remaining init.h includes confirmed via a thorough search with a more
specific regex:
\bInterrupt\(\)|\bShutdown\(\)|\bInitLogging\(\)|\bInitParameterInteraction\(\)|\bAppInitBasicSetup\(\)|\bAppInitParameterInteraction\(\)|\bAppInitSanityChecks\(\)|\bAppInitLockDataDirectory\(\)|\bAppInitMain\(\)|\bSetupServerArgs\(\)|\bLicenseInfo\(\)|g_wallet_init_interface|init.h
d92204c900 build: add warning to detect hidden copies in range-for loops (Cory Fields)
466e16e0e8 cleanup: avoid hidden copies in range-for loops (Cory Fields)
Pull request description:
Following-up on #13241, which was itself a follow-up of #12169.
See title. Fixing these would otherwise be a continuous process, adding the warning should keep them from cropping up.
Note that the warning seems to be Clang-only for now.
Tree-SHA512: ccfb769c3128b3f92c95715abcf21ee2496fe2aa384f80efead1529a28eeb56b98995b531b49a089f8142601389e63f7bb935963d724eacde4f5e1b4a024934b
Instead of comparing version numbers in the wallet to the client
version number, compare them to the latest supported wallet version
in the client. This allows for wallet version numbers to be unrelated
to the client version number.
faa18ca046 wallet: Erase wtxOrderd wtx pointer on removeprunedfunds (MarcoFalke)
Pull request description:
This prevents segfaults, when reading from the freed memory.
Tree-SHA512: 04f8190dea7901cf1cc298d5db98c83b02858f27114c5ef4da738accd176d6647d6b81f3dc39f3d5912b1a981cf0599370fd391c4154ffbde97afc1fac389123
9b72c988a0 scripted-diff: Avoid temporary copies when looping over std::map (Ben Woosley)
Pull request description:
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
Tree-SHA512: b656d66b69ffa1eb954124aa8ae2bc5436ca50262abefa93bdda55cfcdaffc5ff90cd40539051a2bd06355ba69ddf245265cc8764eebff66d761b3aec06155a9
fa7a6cf1b3 policy: Treat segwit as always active (MarcoFalke)
Pull request description:
Now that segwit is active for a long time, there is no need to reject transactions with the reason that segwit hasn't activated.
Strictly speaking, this is a bug fix, because with the release of 0.16, we create segwit transactions in our wallet by default without checking if they are allowed by local policy.
More broadly, this simplifies the code as if "premature witness" was always set to true with the corresponding command line args.
Tree-SHA512: 484c26aa3a66faba6b41e8554a91a29bfc15fbf6caae3d5363a3966283143189c4bd5333a610b0669c1238f75620691264e73f6b9f1161cdacf7574d946436da
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
-BEGIN VERIFY SCRIPT-
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : m/for (\1std::pair<const \2\3 : m/' src/*.cpp src/**/*.cpp
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : (.*)map/for (\1std::pair<const \2\3 : \4map/' src/*.cpp src/**/*.cpp
-END VERIFY SCRIPT-
16e3cd380a Clarify include recommendation (practicalswift)
6d10f43738 Enforce the use of bracket syntax includes ("#include <foo.h>") (practicalswift)
906bee8e5f Use bracket syntax includes ("#include <foo.h>") (practicalswift)
Pull request description:
When analysing includes in the project it is often assumed that the preferred bracket include syntax (`#include <foo.h>`) mentioned in `developer-docs.md` is used consistently. @sipa:s excellent circular dependencies script [`circular-dependencies.py`](50c69b7801/contrib/devtools/circular-dependencies.py) (#13228) is an example of a script making this reasonable assumption.
This PR enables automatic Travis checking of the include syntax making sure that the bracket syntax includes (`#include <foo.h>`) is used consistently.
Tree-SHA512: a414921aabe8e487ebed42f3f1cbd02fecd1add385065c1f2244cd602c31889e61fea5a801507ec501ef9bd309b05d3c999f915cec1c2b44f085bb0d2835c182
f77e1d34fd test: Add MempoolAncestryTests (Karl-Johan Alm)
a08d76bcfe mempool: Calculate descendant maximum thoroughly (Karl-Johan Alm)
6d3568371e wallet: Switch to using ancestor/descendant limits (Karl-Johan Alm)
6888195b06 wallet: Strictly greater than for ancestor caps (Karl-Johan Alm)
322b12ac4e Remove deprecated TransactionWithinChainLimit (Karl-Johan Alm)
4784751547 Switch to GetTransactionAncestry() in OutputEligibleForSpending (Karl-Johan Alm)
475a385a80 Add GetTransactionAncestry to CTxMemPool for general purpose chain limit checking (Karl-Johan Alm)
46847d69d2 mempool: Fix max descendants check (Karl-Johan Alm)
b9ef21dd72 mempool: Add explicit max_descendants (Karl-Johan Alm)
Pull request description:
Currently, `TransactionWithinChainLimit` is restricted to single-output use, and needs to be called every time for different limits. If it is replaced with a chain limit value calculator, that can be called once and reused, and is generally more flexible (see e.g. #12257).
Update: this PR now corrects usage of max ancestors / max descendants, including calculating the correct max descendant value, as advertised for the two limits.
~~This change also makes `nMaxAncestors` signed, as the replacement method will return `-1` for "not in the mempool", which is different from "0", which means "no ancestors/descendants in mempool".~~
~~This is a subset of #12257.~~
Tree-SHA512: aa59c849360542362b3126c0e29d44d3d58f11898e277d38c034dc4b86a5b4500f77ac61767599ce878c876b5c446fec9c02699797eb2fa41e530ec863a00cf9
67e0e04140 [wallet] [docs] Update release notes for removing `getlabeladdress` (John Newbery)
81608178cf [wallet] [rpc] Remove getlabeladdress RPC (John Newbery)
Pull request description:
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
Tree-SHA512: 7f45d0456248ebcc4e54dd34e2578a09a8ea8e4fceda75238ccea9d731dc99a3f3c0519b18a9739de17d2e6e59c9c2259ba67c9ae2e3cb2a40ddb14b9193fe29
Instead of combining the -limitancestorcount and -limitdescendantcount into a nMaxChainLength, this commit uses each one separately in the coin eligibility filters.
TransactionWithinChainLimits would take a 'limit' and check it against ascendants and descendants. This is changed to take an explicit
max ancestors and max descendants value, and to test the corresponding value against its corresponding max.
6aa33feadb Drop UpdateTransaction in favor of UpdateInput (Ben Woosley)
Pull request description:
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the call
(and, often, the enclosing loop).
In most cases, this input is already immediately available and need not be
looked up.
Tree-SHA512: 8c7914a8b7ae975d8ad0e9d760e3c5da65776a5f79d060b8ffb6b3ff7a32235f71ad705f2185b368d9263742d7796bb562395d22b806d90e8502d8c496011e57
6b8b63af14 Generic TransactionSignatureCreator works with both CTransaction and CMutableTransaction (Martin Ankerl)
Pull request description:
Refactored `TransactionSignatureCreator` into a templated `GenericTransactionSignatureCreator` that works with both `CMutableTransaction` and `CTransaction`.
The advantage is that now in `SignSignature`, the `MutableTransactionSignatureCreator` can now operate directly with the `CMutableTransaction` without the need to copy the data into a `CTransaction`.
Running all unit tests brings a very noticable speedup on my machine:
48.4 sec before this change
36.4 sec with this change
--------
12.0 seconds saved
running only `--run_test=transaction_tests/test_big_witness_transaction`:
16.7 sec before this change
5.9 sec with this change
--------
10.8 seconds saved
This relates to my first attempt with the const_cast hack #13202, and to the slow unit test issue #10026.
Also see #13050 which modifies the tests but not the production code (like this PR) to get a speedup.
Tree-SHA512: 2cff0e9699f484f26120a40e431a24c8bc8f9e780fd89cb0ecf20c5be3eab6c43f9c359cde244abd9f3620d06c7c354e3b9dd3da41fa2ca1ac1e09386fea25fb
4b62bdf513 Wallet: Refactor ReserveKeyFromKeyPool for safety (Ben Woosley)
Pull request description:
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
Tree-SHA512: 753f057ad13bd4c28d121f426bf0967ed72b827d97fb24582f9326ec60072abc5482e3db69ccada7c5fc66de9957fc59098432dd223fc4116991cab44c6d7aef
Templated version so that no copying of CMutableTransaction into a CTransaction is
necessary. This speeds up the test case transaction_tests/test_big_witness_transaction
from 7.9 seconds to 3.1 seconds on my machine.
Many options are extremely technical, and refer internals, making it
difficult to translate usefully. This came up in discussion of e.g.
#10949. If a message is not understood by translators (which are
typically end-users, not developers) they'll either translate it
literally, making it harder to understand instead of easier, with the
added drawback of the user no longer being able to google it.
Also the translation was only working for bitcoin-qt as with
the console programs, there is no translation backend. So it was
injecting never-used translation messages for bitcoin-cli, -tx.
For these reasons, stop translating options help completely. This should
not affect the output **in any way** except for bitcoin-qt when a
non-English language is configured in the locale.
This implements #10962.
c004ffc9b4 Make handling of invalid in IsMine more uniform (Pieter Wuille)
a53f0feff8 Add some checks for invalid recursion in IsMine (Pieter Wuille)
b5802a9f5f Simplify IsMine logic (Pieter Wuille)
4e91820531 Make IsMine stop distinguishing solvable/unsolvable (Pieter Wuille)
6d714c3419 Make coincontrol use IsSolvable to determine solvability (Pieter Wuille)
Pull request description:
Our current `IsMine` logic does several things with outputs:
* Determine "spendability" (roughly corresponding to "could we sign for this")
* Determine "watching" (is this an output directly or indirectly a watched script)
* Determine invalidity (is this output definitely not legally spendable, detecting accidental uncompressed pubkeys in witnesses)
* Determine "solvability" (would we be able to sign for this ignoring the fact that we may be missing some private keys).
The last item (solvability) is mostly unrelated and only rarely needed (there is just one instance, inside the wallet's coin control logic). This PR changes that instance to use the separate `IsSolvable` function, and stop `IsMine` from distinguishing between solvable and unsolvable.
As an extra, this also simplifies the `IsMine` logic and adds some extra checks (which wouldn't be hit unless someone adds already invalid scripts to their wallet).
Tree-SHA512: 95a6ef75fbf2eedc5ed938c48a8e5d77dcf09c933372acdd0333129fb7301994a78498f9aacce2c8db74275e19260549dd67a83738e187d40b5090cc04f33adf
Add a `createwallet` RPC to allow wallets to be created dynamically at
runtime. This functionality is currently only available through RPC and
newly created wallets will not be displayed in the GUI.
80b4910f7d wallet: Use shared pointer to retain wallet instance (João Barbosa)
Pull request description:
Currently there are 3 places where it makes sense to retain a wallet shared pointer:
- `vpwallets`;
- `interfaces::Wallet` interface instance - used by the UI;
- wallet RPC functions - given by `GetWalletForJSONRPCRequest`.
The way it is now it is possible to have, for instance, listunspent RPC and in parallel unload the wallet (once #13111 is merged) without blocking. Once the RPC finishes, the shared pointer will release the wallet.
It is also possible to get all existing wallets without blocking because the caller keeps a local list of shared pointers.
This is mostly relevant for wallet unloading.
This PR replaces #11402.
Tree-SHA512: b7e37c7e1ab56626085afe2d40b1628e8d4f0dbda08df01b7e618ecd2d894ce9b83d4219443f444ba889096286eff002f163cb0a48f37063b62e9ba4ccfa6cce
fac1223a56 Cache witness hash in CTransaction (MarcoFalke)
faab55fbb1 Make CMutableTransaction constructor explicit (MarcoFalke)
Pull request description:
This speeds up:
* compactblocks (v2)
* ATMP
* validation and miner (via `BlockWitnessMerkleRoot`)
* sigcache (see also unrelated #13204)
* rpc and rest (nice, but irrelevant)
This presumably slows down rescan, which uses a `CTransaction` and its `GetHash`, but never uses the `GetWitnessHash`. The slow down is proportional to the number of witness transactions in the rescan window. I.e. early in the chain there should be no measurable slow down. Later in the chain, there should be a slow down, but acceptable given the speedups in the modules mentioned above.
Tree-SHA512: 443e86acfcceb5af2163e68840c581d44159af3fd1fce266cab3504b29fcd74c50812b69a00d41582e7e1c5ea292f420ce5e892cdfab691da9c24ed1c44536c7
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the method.
In most cases, this input is already immediately available and need not be
looked up.
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
labels are associated with addresses (rather than addresses being
associated with labels, as was the case with accounts). The
getlabeladdress does not make sense in this model, so remove it.
getaccountaddress is still supported for one release as the accounts
API is deprecated.
The new `loadwallet` RPC method allows an existing wallet to be loaded
dynamically at runtime.
`unloadwallet` and `createwallet` are not implemented. Notably,
`loadwallet` can only be used to load existing wallets, not to create a
new wallet.
Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
159c32d1f1 Add assertion to guide static analyzers. Clang Static Analyzer needs this guidance. (practicalswift)
fd447a6efe Fix dead stores. Values were stored but never read. Limit scope. (practicalswift)
Pull request description:
Fix Clang Static Analyzer warnings reported by @kallewoof in #12961:
* Fix dead stores. Values were stored but never read.
* Add assertion to guide static analyzers. See #12961 for details.
Tree-SHA512: 83dbec821f45217637316bee978e7543f2d2caeb7f7b0b3aec107fede0fff8baa756da8f6b761ae0d38537740839ac9752f6689109c38a4b05c0c041aaa3a1fb
66b0b1b2a6 Add compile time checking for all cs_wallet runtime locking assertions (practicalswift)
Pull request description:
Add compile time checking for `cs_wallet` runtime locking assertions.
This PR is a subset of #12665. The PR was broken up to make reviewing easier.
The intention is that literally all `EXCLUSIVE_LOCKS_REQUIRED`/`LOCKS_EXCLUDED`:s added in this PR should follow either directly or indirectly from `AssertLockHeld(…)`/`AssertLockNotHeld(…)`:s already existing in the repo.
Consider the case where function `A(…)` contains `AssertLockHeld(cs_foo)` (without
first locking `cs_foo` in `A`), and that `B(…)` calls `A(…)` (without first locking `cs_main`):
* It _directly_ follows that: `A(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
* It _indirectly_ follows that: `B(…)` should have an `EXCLUSIVE_LOCKS_REQUIRED(cs_foo)` annotation.
Tree-SHA512: d561d89e98a823922107e56dbd493f0f82e22edac91e51e6422f17daf2b446a70c143b7b157ca618fadd33d0ec63eb7a57dde5a83bfdf1fc19d71459b43e21fd
b6f0b4d wallet: Improve logging when BerkeleyDB environment fails to close (Tim Ruffing)
264c643 wallet: Reset BerkeleyDB handle after connection fails (Tim Ruffing)
Pull request description:
According to the BerkeleyDB docs, the DbEnv handle may not be accessed
after close() has been called. This change ensures that we create a new
handle after close() is called. This avoids a segfault when the first
connection attempt fails and then a second connection attempt tries to
call open() on the already closed DbEnv handle.
Without the patch, bitcoindd reliably crashes in the second call to `set_lg_dir()` after `close()` if
there is an issue with the database:
```
2018-05-03T13:27:21Z Bitcoin Core version v0.16.99.0-a024a1841-dirty (debug build)
[...]
2018-05-03T13:27:21Z Using wallet directory /home/tim/.bitcoin
2018-05-03T13:27:21Z init message: Verifying wallet(s)...
2018-05-03T13:27:21Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T13:27:21Z Using wallet wallet.dat
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T13:27:21Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525354041.bak. Retrying.
2018-05-03T13:27:21Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
[1] 14533 segmentation fault (core dumped) ./src/bitcoind
```
After the fix:
```
2018-05-03T17:19:32Z Bitcoin Core version v0.16.99.0-cc09e3bd0-dirty (release build)
[...]
2018-05-03T17:19:32Z Using wallet directory /home/tim/.bitcoin
2018-05-03T17:19:32Z init message: Verifying wallet(s)...
2018-05-03T17:19:32Z Using BerkeleyDB version Berkeley DB 4.8.30: (April 9, 2010)
2018-05-03T17:19:32Z Using wallet wallet.dat
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z scheduler thread start
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: Error -30974 opening database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2018-05-03T17:19:32Z Moved old /home/tim/.bitcoin/database to /home/tim/.bitcoin/database.1525367972.bak. Retrying.
2018-05-03T17:19:32Z BerkeleyEnvironment::Open: LogDir=/home/tim/.bitcoin/database ErrorFile=/home/tim/.bitcoin/db.log
2018-05-03T17:19:32Z Cache configuration:
2018-05-03T17:19:32Z * Using 2.0MiB for block index database
2018-05-03T17:19:32Z * Using 8.0MiB for chain state database
2018-05-03T17:19:32Z * Using 440.0MiB for in-memory UTXO set (plus up to 286.1MiB of unused mempool space)
2018-05-03T17:19:32Z init message: Loading block index..
[...]
```
Tree-SHA512: b809b318e5014ec47d023dc3dc40826b9706bfb211fa08bc2d29f36971b96caa10ad48d9a3f96c03933be46fa4ff7e00e952ac77bfffb6563767fb08aa4f23d6
a8da482 Bump wallet version for pre split keypool (Andrew Chow)
dfcd9f3 Use a keypool of presplit keys after upgrading to hd chain split (Andrew Chow)
5c50e93 Allow -upgradewallet to upgradewallets to HD (Andrew Chow)
2bcf2b5 Test sethdseed (Andrew Chow)
b5ba01a Add 'sethdseed' RPC to initialize or replace HD seed (Chris Moore)
dd3c07a Separate HaveKey function that checks whether a key is in a keystore (Andrew Chow)
Pull request description:
Revival/rebase of #11085
Adds a new command `sethdseed` which allows you to either set or generate a new HD seed to be used. A new keypool can be generated or the original one kept and new keys added to the keypool will come from the new HD seed.
Wallets that are not HD will be upgraded to be version FEATURE_HD_SPLIT when the `sethdseed` RPC command is used.
I have also add some tests for this.
Additionally `-upgradewallet` can now be used to upgrade a wallet from non-HD to HD. When it is used for such an upgrade, the keypool will be regenerated.
Tree-SHA512: e56c792e150590429ac4a1061e8d6f7b20cca06366e184eb9bbade4cd6ae82699a28fe84f87031eadba97ad2c1606517a105f00fb7b45779c979243020071adb
Bump the wallet version to indicate support for the pre split keypool.
Also prevents any wallets from upgrading to versions between HD_SPLIT
and PRE_SPLIT_KEYPOOL.
After upgrading to HD chain split, we want to continue to use keys
from the old keypool. To do this, before we generate any new keys after
upgrading, we mark all of the keypool entries as being pre-chain
split and move them to a separate pre chain split keypool. Keys are
fetched from that keypool until it is emptied. Only then are the new
internal and external keypools used.
Changes the maximum upgradewallet version to the latest wallet version
number, 159900. Non-HD wallets will be upgraded to use HD derivation.
Non HD chain split wallets will be upgraded to HD chain split.
If a non-HD wallet is upgraded to HD, the keypool will be entirely
regenerated.
Since upgradewallet is effectively run during a first run, all of the
first run initial setup stuff is combined with the upgrade to HD
16be13345 Fix rescanblockchain rpc to property report progress (Ben Woosley)
Pull request description:
Previously it assumed tip in all cases. This also extracts a RescanVerificationProgress helper object whose role is to manage reporting, in order to simplify ScanForWalletTransactions - more lines in total, but much simpler to follow the core logic.
Tree-SHA512: 5ebed0c56fae4ccfe613ff1d7082cb6da5a86635a8993ed3af70b500a4ea43074121aea9219b2f0321fbfeb7efcb964bdc2199297a64ca0fa85d9d07aa637d40
CWallet::ScanForWalletTransactions did not previously take into account
pindexStop when calculating progress.
Renamed progress vars to progress_*.
rescanblockchain is the only rpc that uses this parameter.
According to the BerkeleyDB docs, the DbEnv handle may not be accessed
after close() has been called. This change ensures that we create a new
handle after close() is called. This avoids a segfault when the first
connection attempt fails and then a second connection attempt tries to
call open() on the already closed DbEnv handle.
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
9cb6cdc Simplify semantics of ChainStateFlushed callback (Matt Corallo)
50b6533 scripted-diff: Rename SetBestChain callback ChainStateFlushed (Matt Corallo)
Pull request description:
Previously, ChainStateFlushed would fire either if a full flush
completed (which can happen due to memory limits, forced flush, or
on its own DATABASE_WRITE_INTERVAL timer) *or* on a
ChainStateFlushed-specific DATABASE_WRITE_INTERVAL timer. This is
both less clear for clients (as there are no guarantees about a
flush having actually happened prior to the call), and reults in
extra flushes not clearly intended by the code. We drop the second
case, providing a strong guarantee without removing the periodit
timer-based flushing.
This is a follow-up to discussion in #11857.
Tree-SHA512: 22ba3a0954d265d28413dbf87040790ca5b439820ee7bbadab14028295ec190de82ce5cd664426c82e58b706dc84278868026fa8d066702eb6e6962c9ace1f8e
