It was waiting too near the viewport to load on certain zoom levels. This will maintain the same physical distance for the "approaching viewport" buffer regardless of zoom levels.
## Changes
- Change to canonical_url (with ':').
- The old format of 'claimName/claimId' needs to be supported still, since we shipped with it.
## Notes
- It would be nice to use regex instead of 2 separate paths, but I couldn't figure out how to make the koa variables work.
We currently handle major errors through ErrorBoundary. If the error is network related, ErrorBoundary ends up blank if it's components are lazy-loaded.
#codesplit
## Issue
Sub item in <6119 Creator Settings: beyond "Muted Words">
## Changes
- Removed the existing 5s min gap on livestreams.
- Enabled the 'slow mode min gap' in Creator Settings
This change now affects both comments in claims and livestream comments.
## Issue
The loading circle wasn't showing up, causing confusion.
Splitting CSS doesn't seem trivial as there seems to be a huge dependency on the load order. Pretty much similar to what this person is facing https://lihautan.com/css-code-splitting/#the-problem
## Change
This reverts videojs-specific changes from 4d638bcf.
## Issue
When seeking on a video, RecommendedContent gets re-rendered, which causes the 20 ClaimPreviews to be re-rendered, several times. ClaimPreview has lots of children, plus it's constantly checking against the blacklist, among other things.
## Fix
The culprit seems to be the `recommendedContent` array -- the address may be different, but the contents are the same.
Do a deep compare instead.
- [x] (6332) The IntersectionObserver method of lazy-loading loads cached images visibly late on slower devices. Previously, it was also showing the "broken image" icon briefly, which we mended by placing a dummy transparent image as the initial src.
- Reverted that ugly transparent image fix.
- Use the browser's built-in `loading="lazy"` instead. Sorry, Safari.
- [x] Size-optimization did not take "device pixel ratio" into account.
- When resizing an image through the CDN, we can't just take the dimensions of the tag in pixels directly -- we need to take zooming into account, otherwise the image ends up blurry.
- Previously, we quickly disabled optimization for the channel avatar in the Channel Page because of this. Now that we know the root-cause, the change was reverted and we now go through the CDN with appropriate sizes. This also improves our Web Vital scores.
- [x] Size-optimization wasn't really implemented for all ChannelThumbnail instances.
- The CDN-optimized size was hardcoded to the largest instance, so small images like sidebar thumbnails are still loading images that are unnecessarily larger.
- There's a little-bit of hardcoding of values from CSS here, but I think it's a ok compromise (not something we change often). It also doesn't need to be exact -- the "device pixel ratio" calculate will ensure it's slightly larger than what we need.
- [x] Set `width` and `height` of `<img>` to improve CLS.
- Addresses Ligthhouse complaints, although technically the shifting was addressed at the `ClaimPreviewTile` level (sub-container dimensions are well defined).
- Notes: the values don't need to be the final CSS-adjusted sizes. It just needs to be in the right aspect ratio to help the browser pre-allocate space to avoid shifts.
- [x] Add option to disable lazy-load Channel Thumbnails
- The guidelines mentioned that items that are already in the viewport should not enable `loading="lazy"`.
- We have a few areas where it doesn't make sense to lazy-load (e.g. thumbnail in Header, channel selector dropdown, publish preview, etc.).
## Issue
The scroll listener never unregisters, and is always registering itself on every scroll. I believe it was done that way to also handle the case of "element is already in viewport when mounted".
## Change
Tried to separate both "element is already in viewport when mounted" and "element scrolled into viewport" into different effects.
The timeout value used is a bit arbitrary, but is needed because the initial size is (0, 0), and to debounce any layout shifts. Reasoning: If an element is explicitly placed under this wrapper, the additional delay is acceptable since it's meant to be lazy-loaded anyway.
about to test something
generate programatically
beginning of the frontend
stripe integration page seems to be working
add user
put functionality behind conditional tag
connect frontend working well
adding environment variables to save success and failure url
bugfix
bugfix
final clean up
adding credit card page
seems to be coming along
calls successfully coming from the frontend
fixing up frontend
cleaning up
frontend coming along
client secret working
basic frontend in place
adding tip page
adding more to the tip frontend
frontend almost done
tabs coming along
one last thing to do for frontend
adding explainer text as custom function
putting finishing touches on tabs
support tabs working well
disable fiat toggle when card not connected
fix frontend gui bug
bugfix and pull out label function
fix symbol for tip gui
modal when card is not yet saved
fix fiat disabled bug
knowing whether card is added programatically
sending tip with frontend
tip functionality working
show unpaid balance
add frontend for card add section
update frontend
update frontend
bugfix
change to use react instead of css
update how stripe is instantiated
fix bug
use customer setup
coming along
working but needs optimization
persist if card is saved
adding anonymous tip functionality
fix nan bug
build stripe endpoints programatically
show for all users for time being
allow the stripe key to automatically switch to live environment
bugfix
bugfix
fix jslint
fix channel page support button
better docs
show customer transactions on frontend
basic table in place
various page updates per jeremys notes
showing card details
nicer tip history table
add better prompt to add card on file viewer page
some linting
time
put connect account behind fiat enabled
no persist fiat mode
wallet calls
tip stuff
## Issue
3779 RSS feed for channels
## Initial implementation details
- RSS only (not atom)
- Grabs latest 10 entries (Beamer have concerns)
## Credit
Referenced the community version mentioned in 3779
- The `rateChange` event now logs the updated speed,
not just the time at which it occurred.
- The `scrub` now (more) accurately logs the position
it came from before the destination.
- The recsys events get consolidated for logical consistency.
## Issue
With autoplay off, clicking on another video from the Recommended section didn't update the video poster.
## Fix
Made a mistake assuming that the whole component will be re-mounted, so was only setting the thumbnail once.
Even with the caching changes, a 150kB thumbnail still takes 1-2s to fetch. This impacts the score.
## Change
(1) Start with a large-enough placeholder image (has to be larger than the final image -- inflating doesn't count), then delay just enough for scoring, then switch to the real thumbnail.
(2) Since we are now doing post-mount stuff, we have the exact dimensions to optimize the claim thumbnail. This reduces the typically-several-MBs thumbnail to kBs.
These are chunks that will be requested immediately after ui.js when opening the homepage, so consolidate them into 1 chunk to reduce network overhead.
More work can/should be done to reduce the secondary chunk.
Make immediate GUI feedback to convey the current status, which can be the following:
- typing
- waiting lighthouse results
- waiting claim resolve
- no results or failed.
## Issue
6301: don't use CDN for GIF thumbnails
## Note
Just a minor mistake in the recent thumbnail refactoring; left out the handling when `allowGif` is true.
While Lighthouse allows looser searching like "Tom from LBRY", it doesn't show the expected results when direct channel name with partial ID is entered to disambiguate.
## Issue
6236 Add context menu to file page
## Notes
The download button actually handles a lot of things -- generating 'streamingUrl', differences between Web and Desktop, download progress for Desktop, etc. A simpler fix would be to put something else (maybe "Share") into the overflow menu instead.
Anyway, went ahead to do it per 6236, but retained the item for Desktop since we need a progress label.
This is the list of channels that authorized me as a moderator.
Similar to `moderation.BlockList`, this will only be fetched at startup/reload for now. I don't think there is a need to constantly monitor this. Users just need to refresh to see the moderator GUI elements after the delegator has granted them access.
## Issue
Closes 6159 "Support Comments Enabled/Disabled for comment.List API"
## New behavior
- `disable-comments` tag will block the comments component entirely.
- `settings.commentsEnabled`:
- When false, will pause comment fetching, posting and replying.
- Any already-fetched comments will stay on screen (unless user reloads/F5).
(1) Reduced the debouncing duration so that the final element can be rendered asap after visible.
- If the user is scrolling non-stop, it would continue to debounce and the GUI ends up not showing the final element.
- 25ms seems enough to prevent the initial false-positive that occurs in the scenario of "adjacent/upper elements resized late, so our element was briefly on screen when mounted". If not enough, we can make this a parameter.
(2) Removed `lastUpdateDate` that was a quick hack for Recommended section. We don't use it on that element anymore, so remove the hack to keep the file clean.
(1) The previous code assumed the element is always smaller than the screen. When used on large items like "homepage categories", it'll never load because the element exceeds the screen width or height.
(2) Added optional placeholder element. This allows us to put a cheaper element while waiting, so that the layout doesn't shift when we finally render. This is visually better when scrolling, and complies with Web Vitals.
wip
wip - everything but publish, autoplay, and styling
collection publishing
add channel to collection publish
cleanup
wip
bump
clear mass add after success
move collection item management controls
redirect replace to published collection id
bump
playlist selector on create
bump
use new collection add ui element
bump
wip
gitignore
add content json
wip
bump
context add to playlist
basic collections page style pass wip
wip: edits, buttons, styles...
change fileAuthor to claimAuthor
update, pending bugfixes, delete modal progress, collection header, other bugfixes
bump
cleaning
show page bugfix
builtin collection headers
no playlists, no grid title
wip
style tweaks
use normal looking claim previews for collection tiles
add collection changes
style library previews
collection menulist for delete/view on library
delete modal works for unpublished
rearrange collection publish tabs
clean up collection publishing and items
show on odysee
begin collectoin edit header and css renaming
better thumbnails
bump
fix collection publish redirect
view collection in menu does something
copy and thumbs
list previews, pending, context menus, list page
enter to add collection, lists page empty state
playable lists only, delete feature, bump
put fileListDownloaded back
better collection titles
improve collection claim details
fix horiz more icon
fix up channel page
style, copy, bump
refactor preview overlay properties,
fix reposts showing as floppydisk
add watch later toast,
small overlay properties on wunderbar results,
fix collection actions buttons
bump
cleanup
cleaning, refactoring
bump
preview thumb styling, cleanup
support discover page lists search
sync, bump
bump, fix sync more
enforce builtin order for now
new lists page empty state
try to indicate unpublished edits in lists
bump
fix autoplay and linting
consts, fix autoplay
bugs
fixes
cleanup
fix, bump
lists experimental ui, fixes
refactor listIndex out
hack in collection fallback thumb
bump
## Issue
5873 Unify swap and buy flow // swaps round 2
## Changes
- Added "Buy|Swap" tab in the Buy Page and display the Swap component when needed.
- Removed 'Swap' button from Wallet Page.
- "Buy More" and related tooltips updated to "Buy or Swap Credits".
1. Lock the width of the second pane so that the layout doesn't shift after the image is fetched.
2. The image is huge, so pass through the optimizer.
- Wait until the container is mounted to get the exact image width.
Unfortunately, it still takes 0.8s on average to fetch the image, regardless of how small the image has been optimized.
Login graphic improvements
1. Lock the width of the second pane so that the layout doesn't shift after the image is fetched.
2. The image is huge, so pass through the optimizer.
- Wait until the container is mounted to get the exact image width.
Unfortunately, it still takes 1s (on average) to fetch the image, regardless of how small the image has been optimized.
