(1) Due to IAPI/commerce query limit, and also to not pollute the wallet with infinite chargeCodes, we'll only show the last 10 swaps. Beamer mentioned that it's possible to tracked back the past chargeCodes of the user, and potential provide a `list` endpoint to handle disputes.
(2) If a user explicitly removed an entry, don't repopulate that entry even if websocket returned an updated status for it. While it might be useful to handle accidental removals, it looks weird when the list gets repopulated with 'Expired' entries.
(3) Add sanitization when repopulating the chargeCodes from the wallet data (i.e. remove 'null' entries).
(4) Always repopulate the list per wallet data so every instance looks the same.
- For the active swap, switch from polling to websocket. The returned data is now the Charge data from the commerce, so some parsing will be required.
- Allow the user to send other coins that the commerce supports.
- Only save the 'chargeCode' to the wallet. The other data can be repopulated from this.
- Store the receipt currency. I'm not sure if the commerce supports sending bits from various coins. Take the coin that came with the 'COMPLETED' message for now.
- Fix 'lbc' calculation to match IAPI side.
- Allow users to see full detauls from "View Past Swaps".
- String cleanup
- GUI cleanup.
While it would be nice if we can swap anonymously through Desktop, the IAPI will tie a wallet address with an account. Final decision is to require authentication.
- Users should be able to see the entered and promised amount, otherwise they might forget how much to send over.
- This change also prepares for the future upgrade to support multiple coins.
## Issue
- Patch for 5316: "Home and End keys not working in search box"
## Notes
Seems like 'shift+home' wasn't highlighting the text. 'shift+end' works.
Was pretty sure I tested that previously. Anyway, adding the direction variable seems to fix it.
- The icon makes the screen too busy when there are lots of images in a page.
- Use src as the last resort for the text (I though `title` and `alt` was mandatory in markdown; apparently not).
- Re-organize the return statement of 'NotificationsPage' a bit, otherwise the entire page will reload (blink) every time the drop-down value is changed due to the 'fetching' flag.
- Retained the original behavior of (only showing a blank page + spinner) on the very first load. I think there is merit in not showing the buttons immediately (e.g. when not logged in and `/$/notifications` is accessed directly).
Initially, the filtered list was done at the component level, and the list was simply a subset of `notifications`. But due to the limit issue explained in 5694, we now query the filtered list instead.
Considerations:
- The filtered list could contain items not listed in the 'All' list. We could add a string at the bottom of 'All' that says "not all items retrieved" if this confuses the user.
- The unseen count needs to be based on 'All' and not the filtered one, so that data needs to be stashed somehow (can't re-use the array).
Use 2 arrays for now instead of trying to accumulate "all" and "filtered" into 1 array.
## Issue
4945: Simplify / revamp search filters for odysee (and lbry.tv)
## Changes
- Tweaked the "claim type = file | channel | everything" a little to hopefully make it more intuitive.
- Added "Sort By".
- Added "Upload Date".
- Fixed the affected files to handle both Desktop and Odysee.
- Tweaked the layout to be more condensed so that we can see some results as we change the filter.
- Added animations.
- Added "Exact match" option that helps user to surround with quotes.
- This change makes it work for both Desktop and Odysee. When merging back to Odysee, just take the file from `master` (barring any changes from someone else).
- Given that we'll be opening up the search filter for Odysee, the only "simple site" customization that was back-ported is `free_only=true`.
## Issue
- Redo 5636: Disable video previews in comments/posts made by channels below a certain channel staked level
- Closes 5738: expand video preview level requierment to markdown images also
I think using the 'values' for the keys should be fine since each language name is unique. A key-clash would also help us catch mistakes like not differentiating sub-languages if support any (e.g. "English" vs. "English (British)")
Had to cast to String for lint.
- SUPPORTED_SUB_LANGUAGE_CODES[] that I introduced was pretty redundant when SUPPORTED_LANGUAGES[] already hold the information. The logic to ignore sub-languages (i.e. reduce the locale's "en-GB" to "en" is now located in getDefaultLanguage()).
- SUPPORTED_BROWSER_LANGUAGES[] and SUPPORTED_LANGUAGES[] look so similar and hard to tell what the former is for at first glance. The functionality to map 'zh-CN' to 'zh-Hans' is now handled by resolveLanguageAlias(), which makes the intention clearer.
This leaves us with a single list -- SUPPORTED_LANGUAGES[], whose key also tells us the desired language code to use.
Also, clients now need to call `resolveLanguageAlias` to map any language code aliases, as they differ depending on how it is queried (e.g. `navigator.language` vs. `app.getLocal()` uses different standards).
I think we no longer need to explicitly migrate existing user's 'zh-CN' into 'zh-Hans' because the rest of the system will always use the desired language code as long as 'resolveLanguageAlias' is called appropriately. e.g. the system uses `selectLanguage` and `selectLanguage` calls `resolveLanguageAlias`.
## Issue
Closes 5811: Video-embed in markdown-post is broken
- Revert "Fix 'makeSelectIsPlaying' to look at 'playing' instead of 'primary'." dabdc980a1.
- Revert "Fix 'isPlaying' to reflect 'playing' instead of 'primary' URI" 351890decf.
Reverting means "Deleting MD from downloads list causes spinning icon to run forever 4959" gets re-opened, but this is a way less severe issue to leave in.
Closes 5000: AutoPlay in Floating Player only works one time
Factor out the code that queries the recommendation. It needs to be called in two places:
(1) `RecommendedContent` - need to cover the case of floating player + visit another video page.
(2) When video is floating and autoplayed the next video.
## Issue
Closes#5720: Edit: channel-selector should re-populate with original channel
## Notes
'incognito' was not set to false, causing the 'ChannelSelector' to select Anonymous.
- remove anon option in channel dropdown when livestream tab is selected
- attempt to fill publish form with current active channel name just prior to publishing to (edge condition)
- edge condition occurs when user fills out form fully. User switches to Post (which allows anon in drop down selector). User selects Anon channel, then switches back to the livestream tab. The form was previously updated with `channel: undefined` but does not get changed when clicking the livestream tab. So we just updated the form one last time prior to publishing as a livestream
- Show most recent livestream claim on livestream setup page instead of first livestream claim
## Issue
Closes 5721: Publish-Preview updates
## Changes
(1) Match the recent "incognito" change that sets the channel to `undefined` via `updatePublishForm`. This change would also cover `null` -- I don't think it's being used to represent something else, so showing "Anonymous" for `null` should be fine.
(2) Added channel icons, so it'll be more obvious to the user if they accidentally selected the wrong channel.
## Issue
Closes 5687: Ensure post mode has no text limit
## Changes
- `type="markdown"` can now have unlimited length if clients don't define `textAreaMaxWidth`.
- The internal default limit of 2000 is narrowed down to `type=textarea`.
## Issue
Closes 3661: Autoplay + Related go into loops ( infinite ) sometimes
## GUI
Push the actual "next" item into the top of the list.
## History search
1. Skip if the next item is itself.
2. The URL stored in the history comes in various forms, so a direct comparison won't work.
- There's also a weird case where the URL differs by just a little (p.09 vs p-09), but with the same claim ID:
lbry://vacuum-tube-computer-p.09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
lbry://vacuum-tube-computer-p-09-–-building#5212bc8bc63c373e2bf1ebc5b765595ed7b6514d
Check the claim_id as well to cover cases like these.
## Issue
Closes 5537: Allow youtube sync new pass language to api
## Notes
- Default language for the selector comes from browser (`navigator.language`)
## Changes
- Restore original code for how Volume and Mute is restored.
- Playback rate will be only change that gets "re-restored" in "loadedmetadata".
## Issue
5513: Video-setting persistence broken
## Notes
- Per videojs recommendation, the setting-restoration should be done after the video has been loaded, so the action was moved to `loadedmetadata`. This fixed the volume slider problem, and should have fixed the playbackRate too.
- For playbackRate, there is another special case where it gets reset to 1 (refer to comments in code).
